[ 0.000000] Linux version 4.14.14-gentoo (root@i7) (gcc version 6.4.0 (Gentoo 6.4.0 p1.1)) #1 SMP Fri Jan 19 14:43:22 CET 2018 [ 0.000000] Command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.14.14-gentoo root=UUID=953f200f-a3e3-4153-bf86-e1b2c2f95374 ro single [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfe6ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfe70000-0x00000000dfe87fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfe88000-0x00000000dfedbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfedc000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: System manufacturer System Product Name/P7P55D, BIOS 2101 10/20/2011 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdfe70 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffffffffff200780] [ 0.000000] Base memory trampoline at [ffff91c8c0095000] 95000 size 24576 [ 0.000000] BRK [0x197f56000, 0x197f56fff] PGTABLE [ 0.000000] BRK [0x197f57000, 0x197f57fff] PGTABLE [ 0.000000] BRK [0x197f58000, 0x197f58fff] PGTABLE [ 0.000000] BRK [0x197f59000, 0x197f59fff] PGTABLE [ 0.000000] BRK [0x197f5a000, 0x197f5afff] PGTABLE [ 0.000000] BRK [0x197f5b000, 0x197f5bfff] PGTABLE [ 0.000000] BRK [0x197f5c000, 0x197f5cfff] PGTABLE [ 0.000000] BRK [0x197f5d000, 0x197f5dfff] PGTABLE [ 0.000000] BRK [0x197f5e000, 0x197f5efff] PGTABLE [ 0.000000] RAMDISK: [mem 0x37279000-0x37933fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FB970 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 0x00000000DFE70100 00006C (v01 102011 XSDT1457 20111020 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000DFE70290 0000F4 (v03 102011 FACP1457 20111020 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x00000000DFE704A0 00EF4D (v01 A1326 A1326001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 0x00000000DFE88000 000040 [ 0.000000] ACPI: FACS 0x00000000DFE88000 000040 [ 0.000000] ACPI: APIC 0x00000000DFE70390 0000CC (v01 102011 APIC1457 20111020 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000DFE70460 00003C (v01 102011 OEMMCFG 20111020 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000DFE88040 000072 (v01 102011 OEMB1457 20111020 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DFE7F3F0 000038 (v01 102011 OEMHPET 20111020 MSFT 00000097) [ 0.000000] ACPI: DMAR 0x00000000DFE880C0 000090 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: ASPT 0x00000000DFE7F690 000034 (v06 102011 PerfTune 20111020 MSFT 00000097) [ 0.000000] ACPI: OSFR 0x00000000DFE7F6D0 0000B0 (v01 102011 OEMOSFR 20111020 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000DFE8AC00 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfe6ffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff] [ 0.000000] On node 0 totalpages: 2096650 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3994 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14266 pages used for memmap [ 0.000000] DMA32 zone: 913008 pages, LIFO batch:31 [ 0.000000] Normal zone: 18432 pages used for memmap [ 0.000000] Normal zone: 1179648 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfe70000-0xdfe87fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfe88000-0xdfedbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfedc000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xfedfffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] percpu: Embedded 44 pages/cpu @ffff91cad7200000 s139288 r8192 d32744 u262144 [ 0.000000] pcpu-alloc: s139288 r8192 d32744 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2063867 [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.14.14-gentoo root=UUID=953f200f-a3e3-4153-bf86-e1b2c2f95374 ro single [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 8143440K/8386600K available (10252K kernel code, 1896K rwdata, 3000K rodata, 1220K init, 1560K bss, 243160K reserved, 0K cma-reserved) [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.000000] NR_IRQS: 524544, nr_irqs: 552, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2808.582 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5617.16 BogoMIPS (lpj=2808582) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] ACPI: Core revision 20170728 [ 0.009531] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.009585] Security Framework initialized [ 0.009589] SELinux: Initializing. [ 0.009602] SELinux: Starting in permissive mode [ 0.009641] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.009663] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.009846] CPU: Physical Processor ID: 0 [ 0.009849] CPU: Processor Core ID: 0 [ 0.009857] mce: CPU supports 9 MCE banks [ 0.009863] CPU0: Thermal monitoring enabled (TM1) [ 0.009872] process: using mwait in idle threads [ 0.009876] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.009878] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.009881] Spectre V2 mitigation: Vulnerable: Minimal generic ASM retpoline [ 0.009972] Freeing SMP alternatives memory: 24K [ 0.010058] smpboot: Max logical packages: 4 [ 0.010067] Switched APIC routing to physical flat. [ 0.010456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.021000] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz (family: 0x6, model: 0x1e, stepping: 0x5) [ 0.021000] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver. [ 0.021000] core: CPU erratum AAJ80 worked around [ 0.021000] core: CPUID marked event: 'bus cycles' unavailable [ 0.021000] ... version: 3 [ 0.021000] ... bit width: 48 [ 0.021000] ... generic registers: 4 [ 0.021000] ... value mask: 0000ffffffffffff [ 0.021000] ... max period: 000000007fffffff [ 0.021000] ... fixed-purpose events: 3 [ 0.021000] ... event mask: 000000070000000f [ 0.021000] Hierarchical SRCU implementation. [ 0.021092] smp: Bringing up secondary CPUs ... [ 0.021185] x86: Booting SMP configuration: [ 0.021189] .... node #0, CPUs: #1 [ 0.023352] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.023481] #2 #3 #4 #5 #6 #7 [ 0.032024] smp: Brought up 1 node, 8 CPUs [ 0.032024] smpboot: Total of 8 processors activated (44937.31 BogoMIPS) [ 0.033333] devtmpfs: initialized [ 0.033333] x86/mm: Memory block size: 128MB [ 0.034379] PM: Registering ACPI NVS region [mem 0xdfe88000-0xdfedbfff] (344064 bytes) [ 0.034379] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.034379] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 0.034379] NET: Registered protocol family 16 [ 0.034440] cpuidle: using governor menu [ 0.034440] ACPI: bus type PCI registered [ 0.034440] PCI: Using configuration type 1 for base access [ 0.036033] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.036057] ACPI: Added _OSI(Module Device) [ 0.036061] ACPI: Added _OSI(Processor Device) [ 0.036064] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.036066] ACPI: Added _OSI(Processor Aggregator Device) [ 0.036230] ACPI: Executed 1 blocks of module-level executable AML code [ 0.047045] ACPI: Dynamic OEM Table Load: [ 0.047060] ACPI: SSDT 0xFFFF91CAD593C000 00244C (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.047460] ACPI: Dynamic OEM Table Load: [ 0.047468] ACPI: SSDT 0xFFFF91CAD5886800 000659 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.048042] ACPI: EC: EC started [ 0.048046] ACPI: EC: interrupt blocked [ 0.048184] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC [ 0.048188] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.048192] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions [ 0.048195] ACPI: Interpreter enabled [ 0.048218] ACPI: (supports S0 S1 S3 S4 S5) [ 0.048221] ACPI: Using IOAPIC for interrupt routing [ 0.048251] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.048473] ACPI: Enabled 14 GPEs in block 00 to 3F [ 0.057494] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.057502] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.057613] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] [ 0.057786] PCI host bridge to bus 0000:00 [ 0.057791] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.057794] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.057798] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.057801] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.057805] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window] [ 0.057809] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff window] [ 0.057813] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.057822] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000 [ 0.057932] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400 [ 0.057953] pci 0000:00:03.0: enabling Extended Tags [ 0.057982] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.058075] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000 [ 0.058180] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000 [ 0.058285] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000 [ 0.058387] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000 [ 0.058485] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000 [ 0.058578] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000 [ 0.058689] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.058709] pci 0000:00:1a.0: reg 0x10: [mem 0xf79fe000-0xf79fe3ff] [ 0.058784] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.058868] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.058884] pci 0000:00:1b.0: reg 0x10: [mem 0xf79f8000-0xf79fbfff 64bit] [ 0.058944] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.059025] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.059086] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.059173] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400 [ 0.059229] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.059312] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400 [ 0.059368] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.059451] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400 [ 0.059511] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.059593] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400 [ 0.059654] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.059738] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.059758] pci 0000:00:1d.0: reg 0x10: [mem 0xf79fd000-0xf79fd3ff] [ 0.059833] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.059913] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.060040] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100 [ 0.060216] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601 [ 0.060232] pci 0000:00:1f.2: reg 0x10: [io 0xa880-0xa887] [ 0.060239] pci 0000:00:1f.2: reg 0x14: [io 0xa800-0xa803] [ 0.060245] pci 0000:00:1f.2: reg 0x18: [io 0xa480-0xa487] [ 0.060251] pci 0000:00:1f.2: reg 0x1c: [io 0xa400-0xa403] [ 0.060257] pci 0000:00:1f.2: reg 0x20: [io 0xa080-0xa09f] [ 0.060264] pci 0000:00:1f.2: reg 0x24: [mem 0xf79f7000-0xf79f77ff] [ 0.060300] pci 0000:00:1f.2: PME# supported from D3hot [ 0.060378] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.060394] pci 0000:00:1f.3: reg 0x10: [mem 0xf79fc000-0xf79fc0ff 64bit] [ 0.060412] pci 0000:00:1f.3: reg 0x20: [io 0xffe0-0xffff] [ 0.060531] pci 0000:01:00.0: [1002:6899] type 00 class 0x030000 [ 0.060545] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.060554] pci 0000:01:00.0: reg 0x18: [mem 0xf7ac0000-0xf7adffff 64bit] [ 0.060560] pci 0000:01:00.0: reg 0x20: [io 0xb000-0xb0ff] [ 0.060571] pci 0000:01:00.0: reg 0x30: [mem 0xf7aa0000-0xf7abffff pref] [ 0.060576] pci 0000:01:00.0: enabling Extended Tags [ 0.060608] pci 0000:01:00.0: supports D1 D2 [ 0.060643] pci 0000:01:00.1: [1002:aa50] type 00 class 0x040300 [ 0.060657] pci 0000:01:00.1: reg 0x10: [mem 0xf7afc000-0xf7afffff 64bit] [ 0.060686] pci 0000:01:00.1: enabling Extended Tags [ 0.060717] pci 0000:01:00.1: supports D1 D2 [ 0.064018] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.064029] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff] [ 0.064033] pci 0000:00:03.0: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.064039] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.064106] pci 0000:06:00.0: [2646:0010] type 00 class 0x010601 [ 0.064171] pci 0000:06:00.0: reg 0x24: [mem 0xf7dff000-0xf7dfffff] [ 0.064181] pci 0000:06:00.0: reg 0x30: [mem 0xf7dc0000-0xf7ddffff pref] [ 0.064235] pci 0000:06:00.0: supports D1 [ 0.064236] pci 0000:06:00.0: PME# supported from D0 D1 D3hot [ 0.067020] pci 0000:00:1c.0: PCI bridge to [bus 06] [ 0.067033] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.067093] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.067134] pci 0000:00:1c.5: PCI bridge to [bus 04] [ 0.067198] pci 0000:03:00.0: [197b:2363] type 00 class 0x010601 [ 0.067286] pci 0000:03:00.0: reg 0x24: [mem 0xf7cfa000-0xf7cfbfff] [ 0.067350] pci 0000:03:00.0: PME# supported from D3hot [ 0.067405] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185 [ 0.067432] pci 0000:03:00.1: reg 0x10: [io 0xdc00-0xdc07] [ 0.067445] pci 0000:03:00.1: reg 0x14: [io 0xd880-0xd883] [ 0.067457] pci 0000:03:00.1: reg 0x18: [io 0xd800-0xd807] [ 0.067469] pci 0000:03:00.1: reg 0x1c: [io 0xd480-0xd483] [ 0.067481] pci 0000:03:00.1: reg 0x20: [io 0xd400-0xd40f] [ 0.067585] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.067598] pci 0000:00:1c.6: PCI bridge to [bus 03] [ 0.067602] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff] [ 0.067605] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.067655] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.067675] pci 0000:02:00.0: reg 0x10: [io 0xc800-0xc8ff] [ 0.067700] pci 0000:02:00.0: reg 0x18: [mem 0xf6fff000-0xf6ffffff 64bit pref] [ 0.067716] pci 0000:02:00.0: reg 0x20: [mem 0xf6ff8000-0xf6ffbfff 64bit pref] [ 0.067727] pci 0000:02:00.0: reg 0x30: [mem 0xf7bf0000-0xf7bfffff pref] [ 0.067790] pci 0000:02:00.0: supports D1 D2 [ 0.067791] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.071022] pci 0000:00:1c.7: PCI bridge to [bus 02] [ 0.071033] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff] [ 0.071037] pci 0000:00:1c.7: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.071044] pci 0000:00:1c.7: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.071096] pci 0000:07:01.0: [13d0:2103] type 00 class 0x028000 [ 0.071112] pci 0000:07:01.0: reg 0x10: [mem 0xf7ef0000-0xf7efffff] [ 0.071121] pci 0000:07:01.0: reg 0x14: [io 0xec00-0xec1f] [ 0.071203] pci 0000:07:02.0: [12d8:e111] type 01 class 0x060400 [ 0.071247] pci 0000:07:02.0: enabling Extended Tags [ 0.071339] pci 0000:07:04.0: [1106:3044] type 00 class 0x0c0010 [ 0.071358] pci 0000:07:04.0: reg 0x10: [mem 0xf7eef000-0xf7eef7ff] [ 0.071367] pci 0000:07:04.0: reg 0x14: [io 0xe880-0xe8ff] [ 0.071431] pci 0000:07:04.0: supports D2 [ 0.071433] pci 0000:07:04.0: PME# supported from D2 D3hot D3cold [ 0.071490] pci 0000:00:1e.0: PCI bridge to [bus 07-08] (subtractive decode) [ 0.071495] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.071498] pci 0000:00:1e.0: bridge window [mem 0xf7e00000-0xf7ffffff] [ 0.071502] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.071504] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.071505] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.071506] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.071507] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode) [ 0.071508] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfed8ffff window] (subtractive decode) [ 0.071577] pci 0000:08:00.0: [1912:0014] type 00 class 0x0c0330 [ 0.071626] pci 0000:08:00.0: reg 0x10: [mem 0xf7ffe000-0xf7ffffff 64bit] [ 0.071841] pci 0000:08:00.0: PME# supported from D0 D3hot [ 0.276041] pci 0000:07:02.0: PCI bridge to [bus 08] [ 0.276061] pci 0000:07:02.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.276114] pci_bus 0000:00: on NUMA node 0 [ 0.276737] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.276800] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.276859] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.276921] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.276983] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.277049] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.277114] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.277176] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.277268] ACPI: EC: interrupt unblocked [ 0.277276] ACPI: EC: event unblocked [ 0.277283] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.277286] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.277324] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.277324] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.277324] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.277324] vgaarb: loaded [ 0.277324] SCSI subsystem initialized [ 0.277324] libata version 3.00 loaded. [ 0.277324] ACPI: bus type USB registered [ 0.277324] usbcore: registered new interface driver usbfs [ 0.277324] usbcore: registered new interface driver hub [ 0.277324] usbcore: registered new device driver usb [ 0.278015] EDAC MC: Ver: 3.0.0 [ 0.278114] PCI: Using ACPI for IRQ routing [ 0.278114] PCI: pci_cache_line_size set to 64 bytes [ 0.278114] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff] [ 0.278114] e820: reserve RAM buffer [mem 0xdfe70000-0xdfffffff] [ 0.278179] NetLabel: Initializing [ 0.278183] NetLabel: domain hash size = 128 [ 0.278185] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.278204] NetLabel: unlabeled traffic allowed by default [ 0.278221] HPET: 8 timers in total, 6 timers will be used for per-cpu timer [ 0.278221] hpet: hpet2 irq 24 for MSI [ 0.278221] hpet: hpet3 irq 25 for MSI [ 0.278221] hpet: hpet4 irq 26 for MSI [ 0.278221] hpet: hpet5 irq 27 for MSI [ 0.278221] hpet: hpet6 irq 28 for MSI [ 0.278221] hpet: hpet7 irq 29 for MSI [ 0.278221] clocksource: Switched to clocksource hpet [ 0.287557] VFS: Disk quotas dquot_6.6.0 [ 0.287588] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.289527] pnp: PnP ACPI init [ 0.289590] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.289597] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.289656] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.289849] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.289856] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.290083] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.290087] system 00:03: [io 0x0800-0x087f] has been reserved [ 0.290091] system 00:03: [io 0x0500-0x057f] has been reserved [ 0.290094] system 00:03: [io 0x0600-0x0607] has been reserved [ 0.290098] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.290101] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.290105] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved [ 0.290110] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.290220] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved [ 0.290227] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.290434] pnp 00:05: [dma 0 disabled] [ 0.290485] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.290593] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.290597] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.290603] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.290696] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.290702] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.290886] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.290891] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.290894] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.290898] system 00:08: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.290902] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.290907] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.291054] pnp: PnP ACPI: found 9 devices [ 0.295587] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.295607] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 0.295609] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 [ 0.295615] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000 [ 0.295617] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000 [ 0.295619] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000 [ 0.295625] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.295627] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.295628] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 [ 0.295635] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.295663] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.295668] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf0200000-0xf03fffff] [ 0.295673] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.295678] pci 0000:00:1c.5: BAR 14: assigned [mem 0xf0600000-0xf07fffff] [ 0.295683] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.295688] pci 0000:00:1c.6: BAR 15: assigned [mem 0xf0a00000-0xf0bfffff 64bit pref] [ 0.295693] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.295696] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff] [ 0.295700] pci 0000:00:1c.5: BAR 13: assigned [io 0x3000-0x3fff] [ 0.295705] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.295709] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff] [ 0.295713] pci 0000:00:03.0: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.295718] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.295724] pci 0000:00:1c.0: PCI bridge to [bus 06] [ 0.295728] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.295733] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.295738] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.295744] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.295748] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.295753] pci 0000:00:1c.4: bridge window [mem 0xf0200000-0xf03fffff] [ 0.295758] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.295764] pci 0000:00:1c.5: PCI bridge to [bus 04] [ 0.295768] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] [ 0.295773] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff] [ 0.295778] pci 0000:00:1c.5: bridge window [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.295785] pci 0000:00:1c.6: PCI bridge to [bus 03] [ 0.295788] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff] [ 0.295793] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.295798] pci 0000:00:1c.6: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref] [ 0.295805] pci 0000:00:1c.7: PCI bridge to [bus 02] [ 0.295809] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff] [ 0.295814] pci 0000:00:1c.7: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.295818] pci 0000:00:1c.7: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.295826] pci 0000:07:02.0: PCI bridge to [bus 08] [ 0.295832] pci 0000:07:02.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.295843] pci 0000:00:1e.0: PCI bridge to [bus 07-08] [ 0.295846] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.295852] pci 0000:00:1e.0: bridge window [mem 0xf7e00000-0xf7ffffff] [ 0.295860] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.295862] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.295863] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.295864] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.295865] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff window] [ 0.295866] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff window] [ 0.295867] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.295868] pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff] [ 0.295869] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.295871] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff] [ 0.295872] pci_bus 0000:06: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.295873] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.295874] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 0.295875] pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf03fffff] [ 0.295876] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.295877] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.295878] pci_bus 0000:04: resource 1 [mem 0xf0600000-0xf07fffff] [ 0.295879] pci_bus 0000:04: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.295880] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.295881] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.295882] pci_bus 0000:03: resource 2 [mem 0xf0a00000-0xf0bfffff 64bit pref] [ 0.295883] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.295884] pci_bus 0000:02: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 0.295885] pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.295887] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.295888] pci_bus 0000:07: resource 1 [mem 0xf7e00000-0xf7ffffff] [ 0.295889] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window] [ 0.295890] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window] [ 0.295891] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.295892] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.295893] pci_bus 0000:07: resource 8 [mem 0xe0000000-0xf7ffffff window] [ 0.295894] pci_bus 0000:07: resource 9 [mem 0xfc000000-0xfed8ffff window] [ 0.295895] pci_bus 0000:08: resource 1 [mem 0xf7f00000-0xf7ffffff] [ 0.295987] NET: Registered protocol family 2 [ 0.296198] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.296350] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.296617] TCP: Hash tables configured (established 65536 bind 65536) [ 0.296662] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.296713] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.296817] NET: Registered protocol family 1 [ 0.297250] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.297260] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 0.297266] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 0.297547] PCI: CLS 32 bytes, default 64 [ 0.297584] Trying to unpack rootfs image as initramfs... [ 1.062568] Freeing initrd memory: 6892K [ 1.062576] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.062580] software IO TLB [mem 0xdbe70000-0xdfe70000] (64MB) mapped at [ffff91c99be70000-ffff91c99fe6ffff] [ 1.063188] audit: initializing netlink subsys (disabled) [ 1.063249] audit: type=2000 audit(1516375004.062:1): state=initialized audit_enabled=0 res=1 [ 1.063503] Initialise system trusted keyrings [ 1.063542] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.063756] SELinux: Registering netfilter hooks [ 1.064224] NET: Registered protocol family 38 [ 1.064228] Key type asymmetric registered [ 1.064230] Asymmetric key parser 'x509' registered [ 1.064246] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.064290] io scheduler noop registered [ 1.064292] io scheduler deadline registered [ 1.064310] io scheduler cfq registered (default) [ 1.064312] io scheduler mq-deadline registered [ 1.064315] io scheduler kyber registered [ 1.064569] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 1.064684] pcieport 0000:00:1c.4: enabling device (0104 -> 0107) [ 1.064795] pcieport 0000:00:1c.5: enabling device (0104 -> 0107) [ 1.065199] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.085767] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.086108] Linux agpgart interface v0.103 [ 1.086173] vesafb: mode is 1400x1050x32, linelength=5632, pages=0 [ 1.086176] vesafb: scrolling: redraw [ 1.086179] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.086186] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override. [ 1.086196] vesafb: framebuffer at 0xe0000000, mapped to 0xffffa3dcc0800000, using 5824k, total 5824k [ 1.273249] Console: switching to colour frame buffer device 175x65 [ 1.452792] fb0: VESA VGA frame buffer device [ 1.453621] intel_idle: MWAIT substates: 0x1120 [ 1.453622] intel_idle: v0.4.1 model 0x1E [ 1.453902] intel_idle: lapic_timer_reliable_states 0x2 [ 1.453909] ipmi message handler version 39.2 [ 1.454737] IPMI System Interface driver. [ 1.455513] ipmi_si: Unable to find any System Interface(s) [ 1.457428] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.459001] ACPI: Power Button [PWRB] [ 1.459721] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.461154] ACPI: Power Button [PWRF] [ 1.464936] brd: module loaded [ 1.467489] loop: module loaded [ 1.468141] libphy: Fixed MDIO Bus: probed [ 1.468966] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.470223] ehci-pci: EHCI PCI platform driver [ 1.471171] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.472238] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.473634] ehci-pci 0000:00:1a.0: debug port 2 [ 1.478431] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported [ 1.478442] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf79fe000 [ 1.486019] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.487141] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.488414] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.489765] usb usb1: Product: EHCI Host Controller [ 1.490680] usb usb1: Manufacturer: Linux 4.14.14-gentoo ehci_hcd [ 1.491821] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.492834] hub 1-0:1.0: USB hub found [ 1.493546] hub 1-0:1.0: 2 ports detected [ 1.494496] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.495550] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.496944] ehci-pci 0000:00:1d.0: debug port 2 [ 1.501680] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported [ 1.501689] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf79fd000 [ 1.509017] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.510131] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.511404] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.512755] usb usb2: Product: EHCI Host Controller [ 1.513670] usb usb2: Manufacturer: Linux 4.14.14-gentoo ehci_hcd [ 1.514811] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.560770] hub 2-0:1.0: USB hub found [ 1.606502] hub 2-0:1.0: 2 ports detected [ 1.652088] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.697896] ohci-pci: OHCI PCI platform driver [ 1.743127] uhci_hcd: USB Universal Host Controller Interface driver [ 1.743191] i8042: PNP: No PS/2 controller found. [ 1.743191] i8042: Probing ports directly. [ 1.745747] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.745753] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.745930] mousedev: PS/2 mouse device common for all mice [ 1.746147] rtc_cmos 00:01: RTC can wake from S4 [ 1.746341] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.746370] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.746397] hidraw: raw HID events driver (C) Jiri Kosina [ 1.746440] usbcore: registered new interface driver usbhid [ 1.746440] usbhid: USB HID core driver [ 1.746494] drop_monitor: Initializing network drop monitor service [ 1.746581] Initializing XFRM netlink socket [ 1.746589] NET: Registered protocol family 17 [ 1.977102] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.079054] tsc: Refined TSC clocksource calibration: 2808.714 MHz [ 2.079253] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x287c6876210, max_idle_ns: 440795206608 ns [ 2.105491] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 2.105492] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.105764] hub 2-1:1.0: USB hub found [ 2.105821] hub 2-1:1.0: 8 ports detected [ 2.383059] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 2.461711] usb 2-1.1: New USB device found, idVendor=1a40, idProduct=0101 [ 2.461714] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.461715] usb 2-1.1: Product: USB 2.0 Hub [ 2.462082] hub 2-1.1:1.0: USB hub found [ 2.462206] hub 2-1.1:1.0: 4 ports detected [ 2.527068] usb 2-1.2: new low-speed USB device number 4 using ehci-pci [ 2.611218] usb 2-1.2: New USB device found, idVendor=0557, idProduct=0204 [ 2.611220] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.611221] usb 2-1.2: Product: UC-100KMA [ 2.614356] input: UC-100KMA as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0557:0204.0001/input/input5 [ 2.666319] hid-generic 0003:0557:0204.0001: input,hidraw0: USB HID v1.00 Keyboard [UC-100KMA] on usb-0000:00:1d.0-1.2/input0 [ 2.668938] input: UC-100KMA as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:0557:0204.0002/input/input6 [ 2.669187] hid-generic 0003:0557:0204.0002: input,hidraw1: USB HID v1.00 Mouse [UC-100KMA] on usb-0000:00:1d.0-1.2/input1 [ 2.733059] usb 2-1.5: new high-speed USB device number 5 using ehci-pci [ 2.812098] usb 2-1.5: New USB device found, idVendor=2040, idProduct=0265 [ 2.812100] usb 2-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.812101] usb 2-1.5: Product: dualHD [ 2.812102] usb 2-1.5: Manufacturer: HCW [ 2.812103] usb 2-1.5: SerialNumber: 0013963290 [ 2.887062] usb 2-1.1.2: new high-speed USB device number 6 using ehci-pci [ 2.991232] usb 2-1.1.2: New USB device found, idVendor=03f0, idProduct=0b01 [ 2.991233] usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.991234] usb 2-1.1.2: Product: hp scanjet 8200 [ 2.991236] usb 2-1.1.2: Manufacturer: hp [ 2.991237] usb 2-1.1.2: SerialNumber: CN4BMT007672 [ 3.041067] usb 2-1.6: new high-speed USB device number 7 using ehci-pci [ 4.101896] clocksource: Switched to clocksource tsc [ 4.102203] microcode: sig=0x106e5, pf=0x2, revision=0x4 [ 4.153730] microcode: Microcode Update Driver: v2.2. [ 4.153740] sched_clock: Marking stable (4153723276, 0)->(4369308133, -215584857) [ 4.154036] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.257053] usb 2-1.6: New USB device found, idVendor=05e3, idProduct=0608 [ 4.257053] usb 2-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.257053] usb 2-1.6: Product: USB2.0 Hub [ 4.257473] hub 2-1.6:1.0: USB hub found [ 4.257473] hub 2-1.6:1.0: 4 ports detected [ 4.282385] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 4.282386] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.282527] hub 1-1:1.0: USB hub found [ 4.282633] hub 1-1:1.0: 6 ports detected [ 4.324066] usb 2-1.7: new full-speed USB device number 8 using ehci-pci [ 4.337002] usb 2-1.7: New USB device found, idVendor=0644, idProduct=0000 [ 4.337002] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.337002] usb 2-1.7: Product: TEAC FD-05PUW [ 4.337002] usb 2-1.7: Manufacturer: TEAC [ 4.360052] usb 2-1.8: new high-speed USB device number 9 using ehci-pci [ 4.622895] usb 2-1.8: New USB device found, idVendor=057c, idProduct=8403 [ 4.622896] usb 2-1.8: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 4.622897] usb 2-1.8: Product: FRITZ!WLAN N2.4 [ 4.622898] usb 2-1.8: Manufacturer: AVM Berlin [ 4.622899] usb 2-1.8: SerialNumber: BD965 [ 4.672518] registered taskstats version 1 [ 4.672519] Loading compiled-in X.509 certificates [ 4.686099] usb 2-1.6.1: new low-speed USB device number 10 using ehci-pci [ 4.689868] Loaded X.509 cert 'Build time autogenerated kernel key: 005b79878e4b8f8224cad8c8c4702cfc94b9058a' [ 4.689880] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 4.734492] rtc_cmos 00:01: setting system clock to 2018-01-19 15:16:48 UTC (1516375008) [ 4.775678] usb 2-1.6.1: New USB device found, idVendor=046d, idProduct=c408 [ 4.775679] usb 2-1.6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.775680] usb 2-1.6.1: Product: USB Trackball [ 4.775681] usb 2-1.6.1: Manufacturer: Logitech [ 4.778991] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/0003:046D:C408.0003/input/input7 [ 4.779152] hid-generic 0003:046D:C408.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.0-1.6.1/input0 [ 4.979115] random: crng init done [ 6.149901] Freeing unused kernel memory: 1220K [ 6.206101] Write protecting the kernel read-only data: 16384k [ 6.263553] Freeing unused kernel memory: 2012K [ 6.322939] Freeing unused kernel memory: 1096K [ 7.065251] scsi host0: pata_jmicron [ 7.065344] scsi host1: pata_jmicron [ 7.065390] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19 [ 7.065392] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19 [ 7.525900] ahci 0000:00:1f.2: version 3.0 [ 7.526084] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 7.536225] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 7.536228] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst [ 7.551717] scsi host2: ahci [ 7.551834] scsi host3: ahci [ 7.551922] scsi host4: ahci [ 7.552015] scsi host5: ahci [ 7.552120] scsi host6: ahci [ 7.552237] scsi host7: ahci [ 7.552290] ata3: SATA max UDMA/133 abar m2048@0xf79f7000 port 0xf79f7100 irq 30 [ 7.552292] ata4: SATA max UDMA/133 abar m2048@0xf79f7000 port 0xf79f7180 irq 30 [ 7.552293] ata5: SATA max UDMA/133 abar m2048@0xf79f7000 port 0xf79f7200 irq 30 [ 7.552294] ata6: SATA max UDMA/133 abar m2048@0xf79f7000 port 0xf79f7280 irq 30 [ 7.552296] ata7: SATA max UDMA/133 abar m2048@0xf79f7000 port 0xf79f7300 irq 30 [ 7.552297] ata8: SATA max UDMA/133 abar m2048@0xf79f7000 port 0xf79f7380 irq 30 [ 7.562514] ahci 0000:06:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 7.562516] ahci 0000:06:00.0: flags: 64bit ncq only pio [ 7.562675] scsi host8: ahci [ 7.562716] ata9: SATA max UDMA/133 abar m4096@0xf7dff000 port 0xf7dff100 irq 31 [ 7.572933] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 7.572935] ahci 0000:03:00.0: flags: 64bit ncq led clo pmp pio [ 7.573218] scsi host9: ahci [ 7.573306] scsi host10: ahci [ 7.573348] ata10: SATA max UDMA/133 abar m8192@0xf7cfa000 port 0xf7cfa100 irq 18 [ 7.573350] ata11: SATA max UDMA/133 abar m8192@0xf7cfa000 port 0xf7cfa180 irq 18 [ 7.869886] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.870349] ata9.00: ATA-8: Kingston SHPM2280P2H/240G, 0C4005T2, max UDMA/133 [ 7.870353] ata9.00: 468862128 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 7.870918] ata9.00: configured for UDMA/133 [ 7.886254] ata11: SATA link down (SStatus 0 SControl 300) [ 8.015067] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.021072] ata3.00: ATA-8: SAMSUNG HD203WI, 1AN10003, max UDMA/133 [ 8.021076] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 8.027266] ata3.00: configured for UDMA/133 [ 8.027725] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD203WI 0003 PQ: 0 ANSI: 5 [ 8.047152] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8.050230] ata10.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100 [ 8.054065] ata10.00: configured for UDMA/100 [ 8.495106] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.497031] ata4.00: supports DRM functions and may not be fully accessible [ 8.502162] ata4.00: disabling queued TRIM support [ 8.502165] ata4.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM04B6Q, max UDMA/133 [ 8.502168] ata4.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 8.507776] ata4.00: supports DRM functions and may not be fully accessible [ 8.512891] ata4.00: disabling queued TRIM support [ 8.517946] ata4.00: configured for UDMA/133 [ 8.518192] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 850 4B6Q PQ: 0 ANSI: 5 [ 8.991187] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.992349] ata5.00: ATA-8: ST3500412AS, CC32, max UDMA/133 [ 8.992352] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 8.993725] ata5.00: configured for UDMA/133 [ 8.994164] scsi 4:0:0:0: Direct-Access ATA ST3500412AS CC32 PQ: 0 ANSI: 5 [ 9.463114] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.467084] ata6.00: ATAPI: ASUS BW-16D1HT, 1.01, max UDMA/100 [ 9.468028] ata6.00: configured for UDMA/100 [ 9.481574] scsi 5:0:0:0: CD-ROM ASUS BW-16D1HT 1.01 PQ: 0 ANSI: 5 [ 9.975105] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.980969] ata7.00: ATA-8: ST1000DM005 HD103SJ, 1AJ10001, max UDMA/133 [ 9.980972] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 9.986895] ata7.00: configured for UDMA/133 [ 9.987350] scsi 6:0:0:0: Direct-Access ATA ST1000DM005 HD10 0001 PQ: 0 ANSI: 5 [ 10.447070] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 10.448953] ata8.00: supports DRM functions and may not be fully accessible [ 10.449408] ata8.00: disabling queued TRIM support [ 10.449410] ata8.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133 [ 10.449413] ata8.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 10.450089] ata8.00: supports DRM functions and may not be fully accessible [ 10.450541] ata8.00: disabling queued TRIM support [ 10.451020] ata8.00: configured for UDMA/133 [ 10.451343] scsi 7:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5 [ 10.452022] scsi 8:0:0:0: Direct-Access ATA Kingston SHPM228 05T2 PQ: 0 ANSI: 5 [ 10.455730] scsi 9:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5 [ 10.621199] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 10.621214] sd 2:0:0:0: [sda] Write Protect is off [ 10.621216] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 10.621226] sd 3:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 10.621239] sd 3:0:0:0: [sdb] Write Protect is off [ 10.621241] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 10.621241] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.621266] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.621272] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 10.621286] sd 4:0:0:0: [sdc] Write Protect is off [ 10.621288] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 10.621309] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.621621] sd 6:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 10.621637] sd 6:0:0:0: [sdd] Write Protect is off [ 10.621639] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 10.621685] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.621720] sd 8:0:0:0: [sdf] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 10.621722] sd 8:0:0:0: [sdf] 4096-byte physical blocks [ 10.621734] sd 8:0:0:0: [sdf] Write Protect is off [ 10.621736] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 10.621758] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.621825] sd 7:0:0:0: [sde] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 10.621838] sd 7:0:0:0: [sde] Write Protect is off [ 10.621840] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 10.621863] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.622216] sdf: sdf1 sdf2 [ 10.622542] sd 8:0:0:0: [sdf] Attached SCSI disk [ 10.623576] sdb: sdb1 [ 10.623879] sd 3:0:0:0: [sdb] Attached SCSI disk [ 10.624024] sde: sde1 [ 10.624242] sda: sda1 sda2 [ 10.624345] sd 7:0:0:0: [sde] Attached SCSI disk [ 10.624494] sd 2:0:0:0: [sda] Attached SCSI disk [ 10.634436] sdd: sdd1 sdd2 [ 10.634765] sd 6:0:0:0: [sdd] Attached SCSI disk [ 10.706648] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 > [ 10.707183] sd 4:0:0:0: [sdc] Attached SCSI disk [ 10.710792] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 10.710821] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 10.710852] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 10.710895] scsi 5:0:0:0: Attached scsi generic sg3 type 5 [ 10.711102] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 10.711140] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 10.711169] sd 8:0:0:0: Attached scsi generic sg6 type 0 [ 10.711202] scsi 9:0:0:0: Attached scsi generic sg7 type 5 [ 10.735065] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 10.735067] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 10.735208] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 10.754908] sr 9:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 10.755017] sr 9:0:0:0: Attached scsi CD-ROM sr1 [ 10.966399] imm: Version 2.05 (for Linux 2.4.0) [ 11.051658] Fusion MPT base driver 3.04.20 [ 11.051659] Copyright (c) 1999-2008 LSI Corporation [ 11.059101] Fusion MPT SPI Host driver 3.04.20 [ 11.064388] Fusion MPT FC Host driver 3.04.20 [ 11.069856] Fusion MPT SAS Host driver 3.04.20 [ 11.073961] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 11.077331] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 11.080938] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 11.113033] Adaptec aacraid driver 1.2.1[50834]-custom [ 11.122938] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 11.124836] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 11.194985] megasas: 07.702.06.00-rc1 [ 11.210094] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.01-k. [ 11.225199] Emulex LightPulse Fibre Channel SCSI driver 11.4.0.3 [ 11.225200] Copyright (C) 2017 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries. [ 11.233605] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 11.247977] mpt3sas version 15.100.00.00 loaded [ 11.364097] usb-storage 2-1.7:1.0: USB Mass Storage device detected [ 11.364366] scsi host11: usb-storage 2-1.7:1.0 [ 11.364447] usbcore: registered new interface driver usb-storage [ 11.390029] xhci_hcd 0000:08:00.0: Resetting [ 12.389215] scsi 11:0:0:0: Direct-Access TEAC FD-05PUW 3000 PQ: 0 ANSI: 0 CCS [ 12.389501] sd 11:0:0:0: Attached scsi generic sg8 type 0 [ 12.410237] xhci_hcd 0000:08:00.0: timed out waiting for pending transaction; performing function level reset anyway [ 12.485302] sd 11:0:0:0: [sdg] Attached SCSI removable disk [ 13.737174] xhci_hcd 0000:08:00.0: not ready 1123ms after FLR; waiting [ 14.825251] xhci_hcd 0000:08:00.0: not ready 2147ms after FLR; waiting [ 16.937197] xhci_hcd 0000:08:00.0: not ready 4195ms after FLR; waiting [ 21.481161] xhci_hcd 0000:08:00.0: not ready 8291ms after FLR; waiting [ 30.185180] xhci_hcd 0000:08:00.0: not ready 16483ms after FLR; waiting [ 47.081173] xhci_hcd 0000:08:00.0: not ready 32867ms after FLR; waiting [ 82.921183] xhci_hcd 0000:08:00.0: not ready 65635ms after FLR; giving up [ 83.204155] xhci_hcd 0000:08:00.0: Refused to change power state, currently in D3 [ 83.254514] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 83.254571] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3 [ 83.516024] xhci_hcd 0000:08:00.0: Host halt failed, -19 [ 83.516025] xhci_hcd 0000:08:00.0: can't setup: -19 [ 83.516027] xhci_hcd 0000:08:00.0: USB bus 3 deregistered [ 83.540329] xhci_hcd 0000:08:00.0: init 0000:08:00.0 fail, -19 [ 83.959112] device-mapper: uevent: version 1.0.3 [ 83.959166] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 83.996859] xor: measuring software checksum speed [ 84.006108] prefetch64-sse: 12488.000 MB/sec [ 84.016110] generic_sse: 10476.000 MB/sec [ 84.016111] xor: using function: prefetch64-sse (12488.000 MB/sec) [ 84.017992] async_tx: api initialized (async) [ 84.028062] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 84.057090] raid6: sse2x1 gen() 4375 MB/s [ 84.074069] raid6: sse2x1 xor() 3173 MB/s [ 84.091109] raid6: sse2x2 gen() 5890 MB/s [ 84.108110] raid6: sse2x2 xor() 4046 MB/s [ 84.125091] raid6: sse2x4 gen() 5542 MB/s [ 84.142149] raid6: sse2x4 xor() 3953 MB/s [ 84.142150] raid6: using algorithm sse2x2 gen() 5890 MB/s [ 84.142150] raid6: .... xor() 4046 MB/s, rmw enabled [ 84.142151] raid6: using ssse3x2 recovery algorithm [ 84.151375] device-mapper: raid: Loading target version 1.13.0 [ 84.827735] Btrfs loaded, crc32c=crc32c-generic [ 84.840503] JFS: nTxBlock = 8192, nTxLock = 65536 [ 84.846015] FS-Cache: Loaded [ 84.856139] RPC: Registered named UNIX socket transport module. [ 84.856140] RPC: Registered udp transport module. [ 84.856140] RPC: Registered tcp transport module. [ 84.856141] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 84.871045] FS-Cache: Netfs 'nfs' registered for caching [ 84.900504] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 84.920989] fuse init (API version 7.26) [ 84.931987] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 85.101105] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 85.101106] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 85.108546] dca service started, version 1.12.1 [ 85.109821] pps_core: LinuxPPS API ver. 1 registered [ 85.109822] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 85.111171] PTP clock support registered [ 85.116059] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 85.116060] igb: Copyright (c) 2007-2014 Intel Corporation. [ 85.120484] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 85.124914] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 85.125242] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffa3dcc0061000, 48:5b:39:02:41:82, XID 083000c0 IRQ 32 [ 85.125244] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 85.129924] sky2: driver version 1.30 [ 85.140959] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI [ 85.157105] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 85.163561] vxge: Copyright(c) 2002-2010 Exar Corp. [ 85.163562] vxge: Driver version: 2.5.3.22640-k [ 85.186965] tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007) [ 85.206220] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k [ 85.206221] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 85.210063] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 85.210064] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 87.205729] EXT2-fs (sdc3): error: couldn't mount because of unsupported optional features (240) [ 87.206102] EXT4-fs (sdc3): couldn't mount as ext3 due to feature incompatibilities [ 87.271373] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) [ 99.298260] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170728/utaddress-247) [ 99.298265] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 99.298267] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS1) (20170728/utaddress-247) [ 99.298270] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20170728/utaddress-247) [ 99.298273] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 99.298273] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS1) (20170728/utaddress-247) [ 99.298276] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20170728/utaddress-247) [ 99.298278] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 99.298297] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 99.373093] ATK0110 ATK0110:00: EC enabled [ 99.373169] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 99.405219] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 99.925889] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 99.949046] firewire_ohci 0000:07:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 100.095624] pktcdvd: pktcdvd0: writer mapped to sr0 [ 100.115717] pktcdvd: pktcdvd1: writer mapped to sr1 [ 100.227404] Error: Driver 'pcspkr' is already registered, aborting... [ 100.374973] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 100.455236] firewire_core 0000:07:04.0: created device fw0: GUID 001e8c0000cafb0e, S400 [ 100.822645] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 100.983125] [drm] radeon kernel modesetting enabled. [ 100.983169] checking generic (e0000000 5b0000) vs hw (e0000000 10000000) [ 100.983169] fb: switching to radeondrmfb from VESA VGA [ 100.983193] Console: switching to colour dummy device 80x25 [ 100.983566] [drm] initializing kernel modesetting (CYPRESS 0x1002:0x6899 0x1682:0x2972 0x00). [ 100.983595] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [ 100.983598] caller pci_map_rom+0x58/0xe0 mapping multiple BARs [ 100.983616] ATOM BIOS: CYPRESS [ 100.983693] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 100.983694] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 100.983697] [drm] Detected VRAM RAM=1024M, BAR=256M [ 100.983698] [drm] RAM width 256bits DDR [ 100.983754] [TTM] Zone kernel: Available graphics memory: 4077342 kiB [ 100.983755] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 100.983755] [TTM] Initializing pool allocator [ 100.983759] [TTM] Initializing DMA pool allocator [ 100.983775] [drm] radeon: 1024M of VRAM memory ready [ 100.983776] [drm] radeon: 1024M of GTT memory ready. [ 100.983783] [drm] Loading CYPRESS Microcode [ 101.198775] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input9 [ 101.198901] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1828S: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line [ 101.198903] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 101.198905] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x28/0x0/0x0/0x0/0x0) [ 101.198906] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0 [ 101.198907] snd_hda_codec_via hdaudioC0D0: dig-out=0x2d/0x2e [ 101.198908] snd_hda_codec_via hdaudioC0D0: inputs: [ 101.198910] snd_hda_codec_via hdaudioC0D0: Front Mic=0x29 [ 101.198912] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x2b [ 101.198914] snd_hda_codec_via hdaudioC0D0: Line=0x2a [ 101.198915] snd_hda_codec_via hdaudioC0D0: CD=0x2c [ 101.208044] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 101.208262] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 101.208303] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 101.208344] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 101.208384] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 101.208427] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 101.208469] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 101.208509] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 101.208550] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 101.252661] iTCO_vendor_support: vendor-support=0 [ 101.254171] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 101.254201] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860) [ 101.254271] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 101.515189] [drm] Internal thermal controller with fan control [ 101.542420] [drm] radeon: dpm initialized [ 101.562857] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 101.563865] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 101.573744] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 101.573872] radeon 0000:01:00.0: WB enabled [ 101.573874] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff91cacedd4c00 [ 101.573875] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff91cacedd4c0c [ 101.574298] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffa3dcc0c1c418 [ 101.574300] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 101.574300] [drm] Driver supports precise vblank timestamp query. [ 101.574301] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 101.574333] radeon 0000:01:00.0: radeon: using MSI. [ 101.574357] [drm] radeon: irq initialized. [ 101.591192] [drm] ring test on 0 succeeded in 1 usecs [ 101.591199] [drm] ring test on 3 succeeded in 3 usecs [ 101.768324] [drm] ring test on 5 succeeded in 1 usecs [ 101.768329] [drm] UVD initialized successfully. [ 101.768642] [drm] ib test on ring 0 succeeded in 0 usecs [ 101.768692] [drm] ib test on ring 3 succeeded in 0 usecs [ 102.027604] Linux video capture interface: v2.00 [ 102.423068] [drm] ib test on ring 5 succeeded [ 102.423465] [drm] Radeon Display Connectors [ 102.423466] [drm] Connector 0: [ 102.423466] [drm] DP-1 [ 102.423467] [drm] HPD4 [ 102.423468] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 102.423468] [drm] Encoders: [ 102.423469] [drm] DFP1: INTERNAL_UNIPHY2 [ 102.423470] [drm] Connector 1: [ 102.423470] [drm] HDMI-A-1 [ 102.423471] [drm] HPD5 [ 102.423471] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 102.423472] [drm] Encoders: [ 102.423472] [drm] DFP2: INTERNAL_UNIPHY2 [ 102.423473] [drm] Connector 2: [ 102.423473] [drm] DVI-I-1 [ 102.423474] [drm] HPD1 [ 102.423474] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 102.423475] [drm] Encoders: [ 102.423475] [drm] DFP3: INTERNAL_UNIPHY1 [ 102.423476] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 102.423476] [drm] Connector 3: [ 102.423477] [drm] DVI-I-2 [ 102.423477] [drm] HPD6 [ 102.423478] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 102.423478] [drm] Encoders: [ 102.423479] [drm] DFP4: INTERNAL_UNIPHY [ 102.423479] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 102.431255] floppy0: no floppy controllers found [ 102.431267] work still pending [ 102.477469] em28xx 2-1.5:1.0: New device HCW dualHD @ 480 Mbps (2040:0265, interface 0, class 0) [ 102.477470] em28xx 2-1.5:1.0: DVB interface 0 found: isoc [ 102.477591] em28xx 2-1.5:1.0: chip ID is em28174 [ 102.518782] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD [ 102.538772] [drm] fb mappable at 0xE034D000 [ 102.538772] [drm] vram apper at 0xE0000000 [ 102.538773] [drm] size 8294400 [ 102.538773] [drm] fb depth is 24 [ 102.538774] [drm] pitch is 7680 [ 102.538828] fbcon: radeondrmfb (fb0) is primary device [ 102.560093] Console: switching to colour frame buffer device 240x67 [ 102.564702] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 102.570126] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 103.618288] em28xx 2-1.5:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xcbdccbc8 [ 103.618289] em28xx 2-1.5:1.0: EEPROM info: [ 103.618290] em28xx 2-1.5:1.0: microcode start address = 0x0004, boot configuration = 0x01 [ 103.625879] em28xx 2-1.5:1.0: AC97 audio (5 sample rates) [ 103.625880] em28xx 2-1.5:1.0: 500mA max power [ 103.625881] em28xx 2-1.5:1.0: Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e [ 103.625904] em28xx 2-1.5:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99) [ 103.626924] tveeprom: Hauppauge model 204109, rev B3I6, serial# 13963290 [ 103.626926] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 103.626926] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) [ 103.626927] tveeprom: audio processor is None (idx 0) [ 103.626928] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 103.626929] em28xx 2-1.5:1.0: dvb set to isoc mode. [ 103.626981] usbcore: registered new interface driver em28xx [ 103.797055] em28xx 2-1.5:1.0: Binding DVB extension [ 103.937791] i2c i2c-10: Added multiplexed i2c bus 11 [ 103.937792] si2168 10-0064: Silicon Labs Si2168-B40 successfully identified [ 103.937793] si2168 10-0064: firmware version: B 4.0.2 [ 104.046043] usb 2-1.8: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 104.046113] usbcore: registered new interface driver ath9k_htc [ 104.160026] si2157 11-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 104.160040] dvbdev: DVB: registering new adapter (2-1.5:1.0) [ 104.160042] em28xx 2-1.5:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 104.160274] em28xx 2-1.5:1.0: DVB extension successfully initialized [ 104.160275] em28xx: Registered (Em28xx dvb Extension) extension [ 104.261174] em28xx 2-1.5:1.0: Registering input extension [ 104.297016] Registered IR keymap rc-hauppauge [ 104.297449] rc rc0: 2-1.5:1.0 IR as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/rc/rc0 [ 104.297483] input: 2-1.5:1.0 IR as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/rc/rc0/input19 [ 104.297541] em28xx 2-1.5:1.0: Input extension successfully initialized [ 104.297542] em28xx: Registered (Em28xx Input Extension) extension [ 104.387683] usb 2-1.8: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 104.639537] ath9k_htc 2-1.8:1.0: ath9k_htc: HTC initialized with 33 credits [ 104.900707] ath9k_htc 2-1.8:1.0: ath9k_htc: FW Version: 1.4 [ 104.900708] ath9k_htc 2-1.8:1.0: FW RMW support: On [ 104.900709] ath: EEPROM regdomain: 0x8114 [ 104.900710] ath: EEPROM indicates we should expect a country code [ 104.900711] ath: doing EEPROM country->regdmn map search [ 104.900711] ath: country maps to regdmn code: 0x37 [ 104.900712] ath: Country alpha2 being used: DE [ 104.900712] ath: Regpair used: 0x37 [ 104.936220] ieee80211 phy0: Atheros AR9271 Rev:1 [ 104.970645] ath9k_htc 2-1.8:1.0 wlp0s29u1u8: renamed from wlan0 [ 107.667121] EXT4-fs (sdc3): re-mounted. Opts: (null) [ 108.000486] Adding 8000364k swap on /dev/sdc2. Priority:-2 extents:1 across:8000364k [ 112.273569] Bluetooth: Core ver 2.22 [ 112.273579] NET: Registered protocol family 31 [ 112.273580] Bluetooth: HCI device and connection manager initialized [ 112.273583] Bluetooth: HCI socket layer initialized [ 112.273584] Bluetooth: L2CAP socket layer initialized [ 112.273589] Bluetooth: SCO socket layer initialized [ 112.730958] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 112.730959] Bluetooth: BNEP filters: protocol multicast [ 112.730962] Bluetooth: BNEP socket layer initialized [ 114.026839] 8021q: 802.1Q VLAN Support v1.8 [ 114.733576] r8169 0000:02:00.0 enp2s0: link down [ 114.819971] 8021q: adding VLAN 0 to HW filter on device bond0 [ 116.027563] wlp0s29u1u8: authenticate with d4:21:22:b4:aa:23 [ 116.277483] wlp0s29u1u8: send auth to d4:21:22:b4:aa:23 (try 1/3) [ 116.359339] wlp0s29u1u8: authenticated [ 116.360093] wlp0s29u1u8: associate with d4:21:22:b4:aa:23 (try 1/3) [ 116.364868] wlp0s29u1u8: RX AssocResp from d4:21:22:b4:aa:23 (capab=0x411 status=0 aid=1) [ 116.373472] wlp0s29u1u8: associated [ 123.024931] NET: Registered protocol family 10 [ 123.025209] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 123.025238] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 123.025315] Segment Routing with IPv6