2.6.10-r6 dmesg dump

dmesg.txt (text/plain), 14.56 KB, created by Frank Lomax on 2005-01-27 05:28:46 UTC

@ 0x000f6f70
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7880
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Built 1 zonelists
Kernel command line: root=/dev/ram0 init=/linuxrc real_root=/dev/hda2 video=nomtrr,1280x1024-16@60
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2079.955 MHz processor.
Using tsc for high-res timesource
Speakup v-2.00 CVS: Thu Oct 21 10:38:21 EDT 2004 : initialized
Speakup:  loading module "speakup_n"
request_module: runaway loop modprobe speakup_n
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 902936k/917504k available (3100k kernel code, 14008k reserved, 1010k data, 208k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4112.38 BogoMIPS (lpj=2056192)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Couldn't initialize miscdevice /dev/synth.
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps:  0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps:        0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2800+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 1820)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1397k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb590, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
spurious 8259A interrupt: IRQ7.
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to [e-mail]
** so I can fix the driver.
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
pnp: 00:00: ioport range 0x4400-0x447f has been reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:00: ioport range 0x4200-0x427f has been reserved
pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
pnp: 00:01: ioport range 0x5000-0x503f has been reserved
pnp: 00:01: ioport range 0x5100-0x513f has been reserved
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
devfs: 2004-01-31 Richard Gooch ([e-mail])
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 [e-mail]).
SGI XFS with large block numbers, no debug enabled
Initializing Cryptographic API
inotify device minor=63
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
vesafb: Matrox, Matrox G450, 00 (OEM: Matrox Graphics Inc.)
vesafb: VBE version: 3.0
vesafb: protected mode interface info at c000:7d60
vesafb: pmi: set display start = c00c7df2, set palette = c00c7e5e
vesafb: pmi: ports = 3de 3df 
vesafb: hardware supports DCC2 transfers
vesafb: monitor limits: vf = 76 Hz, hf = 80 kHz, clk = 140 MHz
vesafb: scrolling: redraw
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x2000000  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x1000000  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x800000  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x400000  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x200000  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x100000  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x80000  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x40000  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x20000  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x10000  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x8000  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x4000  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x2000  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x1000  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x800  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x400  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x200  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x100  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x80  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x40  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x20  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x10  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x8  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x4  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x2  base: 0xf000ef6f
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x1  base: 0xf000ef6f
Console: switching to colour frame buffer device 80x30
vesafb: framebuffer at 0xf000ef6f, mapped to 0xf8880f6f, using 600k, total 32768k
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (40 C)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
elevator: using anticipatory as default io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 92732U8, ATA DISK drive
hdb: CREATIVE CD5230E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 53369568 sectors (27325 MB) w/2048KiB Cache, CHS=52946/16/63, UDMA(66)
hda: cache flushes not supported
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdb: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
st: Version 20041025, fixed bufsize 32768, s/g segs 256
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 6a0 not supported
ACPI wakeup devices: 
SLPB HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 208k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 12 (level, low) -> IRQ 12
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 12, pci mem 0xeb000000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.2
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 11, pci mem 0xeb004000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 5, pci mem 0xeb005000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb 2-1: new low speed USB device using ohci_hcd and address 2
input: USB HID v1.00 Keyboard [Belkin Components USB-PS2 Adapter ] on usb-0000:00:02.0-1
input: USB HID v1.00 Mouse [Belkin Components USB-PS2 Adapter ] on usb-0000:00:02.0-1
sbp2: $Rev: 1219 $ Ben Collins <[e-mail]>
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: [e-mail]
ReiserFS: hda2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda2
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 779144k swap on /dev/hda3.  Priority:-1 extents:1
EXT3 FS on hda2, internal journal
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.30.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:04.0 to 64
eth0: forcedeth.c: subsystem: 01297:0531 bound to 0000:00:04.0
parport_pc: Ignoring new-style parameters in presence of obsolete ones
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (7168 buckets, 57344 max) - 176 bytes per conntrack
drivers/usb/input/hid-input.c: event field not found