wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -i wlp0s29f7u8 -dd

wpa_supplicant_dd.log (text/plain), 12.34 KB, created by cono on 2017-09-02 09:24:35 UTC

wpa_supplicant v2.6
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'wlp0s29f7u8' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
Line: 1 - start of a new network block
ssid - hexdump_ascii(len=8):
     63 6f 6e 6f 2d 6f 75 74                           cono-out        
PSK (ASCII passphrase) - hexdump_ascii(len=11): [REMOVED]
scan_ssid=1 (0x1)
proto: 0x2
key_mgmt: 0x2
priority=1 (0x1)
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 1
   id=0 ssid='cono-out'
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:10
nl80211: Supported cipher 00-0f-ac:8
nl80211: Supported cipher 00-0f-ac:9
nl80211: Using driver-based off-channel TX
nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: interface wlp0s29f7u8 in phy phy0
nl80211: Set mode ifindex 4 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x15aa630
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=0104
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=040a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=040b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=040c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=040d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=090a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=090b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=090c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=090d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=0801
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=0a07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=0a11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=0a1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=1101
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=1102
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=0505
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x15aa630 match=0500
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
netlink: Operstate: ifindex=4 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
Add interface wlp0s29f7u8 to a new radio phy0
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
wlp0s29f7u8: Own MAC address: 80:1f:02:42:e1:73
wpa_driver_nl80211_set_key: ifindex=4 (wlp0s29f7u8) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlp0s29f7u8) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlp0s29f7u8) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlp0s29f7u8) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlp0s29f7u8) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlp0s29f7u8) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
wlp0s29f7u8: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlp0s29f7u8: Setting scan request: 0.100000 sec
ENGINE: Loading dynamic engine
ENGINE: Loading dynamic engine
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
wlp0s29f7u8: Added interface wlp0s29f7u8
wlp0s29f7u8: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlp0s29f7u8 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
random: Got 20/20 bytes from /dev/random
RTM_NEWLINK: ifi_index=4 ifname=wlp0s29f7u8 operstate=0 linkmode=0 ifi_family=0 ifi_flags=0x1043 ([UP][RUNNING])
RTM_NEWLINK: ifi_index=4 ifname=wlp0s29f7u8 operstate=2 linkmode=0 ifi_family=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK: ifi_index=4 ifname=wlp0s29f7u8 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP])
wlp0s29f7u8: State: DISCONNECTED -> SCANNING
Scan SSID - hexdump_ascii(len=8):
     63 6f 6e 6f 2d 6f 75 74                           cono-out        
wlp0s29f7u8: Starting AP scan for wildcard SSID
wlp0s29f7u8: Add radio work 'scan'@0x15c84f0
wlp0s29f7u8: First radio work item in the queue - schedule start immediately
wlp0s29f7u8: Starting radio work 'scan'@0x15c84f0 after 0.000024 second wait
wlp0s29f7u8: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=8):
     63 6f 6e 6f 2d 6f 75 74                           cono-out        
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 01 00 00 40
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp0s29f7u8
wlp0s29f7u8: nl80211: Scan trigger
wlp0s29f7u8: Event SCAN_STARTED (47) received
wlp0s29f7u8: Own scan request started a scan in 0.000097 seconds
EAPOL: disable timer tick
nl80211: Event message available
nl80211: Drv Event 42 (NL80211_CMD_REG_BEACON_HINT) received for wlp0s29f7u8
nl80211: Regulatory beacon hint
wlp0s29f7u8: Event CHANNEL_LIST_CHANGED (28) received
wlp0s29f7u8: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
wlp0s29f7u8: Updating hw mode
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp0s29f7u8
wlp0s29f7u8: nl80211: New scan results available
nl80211: Scan probed for SSID 'cono-out'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484 5180 5190 5200 5220 5230 5240 5260 5270 5280 5300 5310 5320 5500 5510 5520 5540 5550 5560 5580 5590 5600 5620 5630 5640 5660 5670 5680 5700 5745 5755 5765 5785 5795 5805 5825
wlp0s29f7u8: Event SCAN_RESULTS (3) received
wlp0s29f7u8: Scan completed in 6.841911 seconds
nl80211: Received scan results (1 BSSes)
wlp0s29f7u8: BSS: Start scan result update 1
wlp0s29f7u8: BSS: Add new id 0 BSSID 62:45:b1:3c:c3:8a SSID '' freq 5805
BSS: last_scan_res_used=1/32
wlp0s29f7u8: New scan results available (own=1 ext=0)
wlp0s29f7u8: Radio work 'scan'@0x15c84f0 done in 6.849049 seconds
wlp0s29f7u8: radio_work_free('scan'@0x15c84f0: num_active_works --> 0
wlp0s29f7u8: Selecting BSS from priority group 1
wlp0s29f7u8: 0: 62:45:b1:3c:c3:8a ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0xc631 level=-75 freq=5805 
wlp0s29f7u8:    skip - SSID not known
wlp0s29f7u8: No suitable network found
wlp0s29f7u8: Setting scan request: 5.000000 sec
Scan SSID - hexdump_ascii(len=8):
     63 6f 6e 6f 2d 6f 75 74                           cono-out        
wlp0s29f7u8: Starting AP scan for wildcard SSID
wlp0s29f7u8: Add radio work 'scan'@0x15c7ee0
wlp0s29f7u8: First radio work item in the queue - schedule start immediately
wlp0s29f7u8: Starting radio work 'scan'@0x15c7ee0 after 0.000026 second wait
wlp0s29f7u8: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=8):
     63 6f 6e 6f 2d 6f 75 74                           cono-out        
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 01 00 00 40
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp0s29f7u8
wlp0s29f7u8: nl80211: Scan trigger
wlp0s29f7u8: Event SCAN_STARTED (47) received
wlp0s29f7u8: Own scan request started a scan in 0.000086 seconds
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp0s29f7u8
wlp0s29f7u8: nl80211: New scan results available
nl80211: Scan probed for SSID 'cono-out'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484 5180 5190 5200 5220 5230 5240 5260 5270 5280 5300 5310 5320 5500 5510 5520 5540 5550 5560 5580 5590 5600 5620 5630 5640 5660 5670 5680 5700 5745 5755 5765 5785 5795 5805 5825
wlp0s29f7u8: Event SCAN_RESULTS (3) received
wlp0s29f7u8: Scan completed in 6.782090 seconds
nl80211: Received scan results (1 BSSes)
wlp0s29f7u8: BSS: Start scan result update 2
BSS: last_scan_res_used=1/32
wlp0s29f7u8: New scan results available (own=1 ext=0)
wlp0s29f7u8: Radio work 'scan'@0x15c7ee0 done in 6.789142 seconds
wlp0s29f7u8: radio_work_free('scan'@0x15c7ee0: num_active_works --> 0
wlp0s29f7u8: Selecting BSS from priority group 1
wlp0s29f7u8: 0: 62:45:b1:3c:c3:8a ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0xc631 level=-75 freq=5805 
wlp0s29f7u8:    skip - SSID not known
wlp0s29f7u8: No suitable network found
wlp0s29f7u8: Setting scan request: 5.000000 sec
Scan SSID - hexdump_ascii(len=8):
     63 6f 6e 6f 2d 6f 75 74                           cono-out        
wlp0s29f7u8: Starting AP scan for wildcard SSID
wlp0s29f7u8: Add radio work 'scan'@0x15c7b30
wlp0s29f7u8: First radio work item in the queue - schedule start immediately
wlp0s29f7u8: Starting radio work 'scan'@0x15c7b30 after 0.000023 second wait
wlp0s29f7u8: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=8):
     63 6f 6e 6f 2d 6f 75 74                           cono-out        
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 01 00 00 40
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp0s29f7u8
wlp0s29f7u8: nl80211: Scan trigger
wlp0s29f7u8: Event SCAN_STARTED (47) received
wlp0s29f7u8: Own scan request started a scan in 0.000099 seconds
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp0s29f7u8
wlp0s29f7u8: nl80211: New scan results available
nl80211: Scan probed for SSID 'cono-out'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484 5180 5190 5200 5220 5230 5240 5260 5270 5280 5300 5310 5320 5500 5510 5520 5540 5550 5560 5580 5590 5600 5620 5630 5640 5660 5670 5680 5700 5745 5755 5765 5785 5795 5805 5825
wlp0s29f7u8: Event SCAN_RESULTS (3) received
wlp0s29f7u8: Scan completed in 6.788347 seconds
nl80211: Received scan results (1 BSSes)
wlp0s29f7u8: BSS: Start scan result update 3
BSS: last_scan_res_used=1/32
wlp0s29f7u8: New scan results available (own=1 ext=0)
wlp0s29f7u8: Radio work 'scan'@0x15c7b30 done in 6.794864 seconds
wlp0s29f7u8: radio_work_free('scan'@0x15c7b30: num_active_works --> 0
wlp0s29f7u8: Selecting BSS from priority group 1
wlp0s29f7u8: 0: 62:45:b1:3c:c3:8a ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0xc631 level=-75 freq=5805 
wlp0s29f7u8:    skip - SSID not known
wlp0s29f7u8: No suitable network found
wlp0s29f7u8: Setting scan request: 5.000000 sec