# Copyright 1999-2016 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 # $Id$ # XXX: we need to review menu.lst vs grub.conf handling. We've been converting # all systems to grub.conf (and symlinking menu.lst to grub.conf), but # we never updated any of the source code (it still all wants menu.lst), # and there is no indication that upstream is making the transition. # If you need to roll a new grub-static distfile, here is how. # - Robin H. Johnson - 29 Nov 2010 # FEATURES='-noauto -noinfo -nodoc -noman -splitdebug nostrip' \ # USE='static -ncurses -netboot -custom-cflags' \ # PORTAGE_COMPRESS=true GRUB_STATIC_PACKAGE_BUILDING=1 ebuild \ # grub-${PVR}.ebuild clean package && \ # qtbz2 -s -j ${PKGDIR}/${CAT}/${PF}.tbz2 && \ # mv ${PF}.tar.bz2 ${DISTDIR}/grub-static-${PVR}.tar.bz2 EAPI="5" inherit eutils mount-boot toolchain-funcs linux-info flag-o-matic autotools pax-utils multiprocessing PATCHVER="1.14" # Should match the revision ideally DESCRIPTION="GNU GRUB Legacy boot loader" HOMEPAGE="https://www.gnu.org/software/grub/" SRC_URI="mirror://gentoo/${P}.tar.gz mirror://gnu-alpha/${PN}/${P}.tar.gz mirror://gentoo/splash.xpm.gz mirror://gentoo/${P}-patches-${PATCHVER}.tar.bz2" LICENSE="GPL-2" SLOT="0" KEYWORDS="~amd64 ~x86 ~x86-fbsd" IUSE="custom-cflags ncurses netboot static" LIB_DEPEND="ncurses? ( >=sys-libs/ncurses-5.9-r3:0[static-libs(+),abi_x86_32(-)] )" RDEPEND="!static? ( ${LIB_DEPEND//[static-libs(+),/=[} )" DEPEND="${RDEPEND} virtual/pkgconfig static? ( ${LIB_DEPEND} )" RDEPEND+=" !sys-boot/grub:2[-multislot]" pkg_setup() { case $(tc-arch) in amd64) CONFIG_CHECK='~IA32_EMULATION' check_extra_config ;; esac } src_prepare() { # Grub will not handle a kernel larger than EXTENDED_MEMSIZE Mb as # discovered in bug 160801. We can change this, however, using larger values # for this variable means that Grub needs more memory to run and boot. For a # kernel of size N, Grub needs (N+1)*2. Advanced users should set a custom # value in make.conf, it is possible to make kernels ~16Mb in size, but it # needs the kitchen sink built-in. local t="custom" if [[ -z ${GRUB_MAX_KERNEL_SIZE} ]] ; then case $(tc-arch) in amd64) GRUB_MAX_KERNEL_SIZE=9 ;; x86) GRUB_MAX_KERNEL_SIZE=5 ;; esac t="default" fi einfo "Grub will support the ${t} maximum kernel size of ${GRUB_MAX_KERNEL_SIZE} Mb (GRUB_MAX_KERNEL_SIZE)" pushd ${WORKDIR} sed -i -e"s/-nopie/-no-pie/g" patch/860_all_grub-0.97-pie.patch || die "nopi sed failed" popd sed -i \ -e "/^#define.*EXTENDED_MEMSIZE/s,3,${GRUB_MAX_KERNEL_SIZE},g" \ "${S}"/grub/asmstub.c \ || die EPATCH_SUFFIX="patch" epatch "${WORKDIR}"/patch # bug 564890, 566638 epatch "${FILESDIR}"/grub-0.97-Add-esp-to-list-of-clobbered-registers.patch epatch "${FILESDIR}"/grub-0.97-ncurses-pkgconfig.patch epatch_user rm -f "${S}"/aclocal.m4 # seems to keep bug 418287 away eautoreconf } src_configure() { filter-flags -fPIE #168834 use amd64 && multilib_toolchain_setup x86 unset BLOCK_SIZE #73499 ### i686-specific code in the boot loader is a bad idea; disabling to ensure ### at least some compatibility if the hard drive is moved to an older or ### incompatible system. # grub-0.95 added -fno-stack-protector detection, to disable ssp for stage2, # but the objcopy's (faulty) test fails if -fstack-protector is default. # create a cache telling configure that objcopy is ok, and add -C to econf # to make use of the cache. # # CFLAGS has to be undefined running econf, else -fno-stack-protector detection fails. # STAGE2_CFLAGS is not allowed to be used on emake command-line, it overwrites # -fno-stack-protector detected by configure, removed from netboot's emake. use custom-cflags || unset CFLAGS tc-ld-disable-gold #439082 #466536 #526348 export grub_cv_prog_objcopy_absolute=yes #79734 use static && append-ldflags -static if use amd64 && use static ; then if [[ -n ${GRUB_STATIC_PACKAGE_BUILDING} ]] ; then eerror "You have set GRUB_STATIC_PACKAGE_BUILDING. This" eerror "is specifically intended for building the tarballs for the" eerror "grub-static package via USE='static -ncurses'." eerror "All bets are now off." fi fi multijob_init # build the net-bootable grub first, but only if "netboot" is set if use netboot ; then ( multijob_child_init mkdir -p "${WORKDIR}"/netboot pushd "${WORKDIR}"/netboot >/dev/null ECONF_SOURCE=${S} \ econf \ --libdir=/lib \ --datadir=/usr/lib/grub \ --exec-prefix=/ \ --disable-auto-linux-mem-opt \ --enable-diskless \ --enable-{3c{5{03,07,09,29,95},90x},cs89x0,davicom,depca,eepro{,100}} \ --enable-{epic100,exos205,ni5210,lance,ne2100,ni{50,65}10,natsemi} \ --enable-{ne,ns8390,wd,otulip,rtl8139,sis900,sk-g16,smc9000,tiara} \ --enable-{tulip,via-rhine,w89c840} popd >/dev/null ) & multijob_post_fork fi # Now build the regular grub # Note that FFS and UFS2 support are broken for now - stage1_5 files too big econf \ --libdir=/lib \ --datadir=/usr/lib/grub \ --exec-prefix=/ \ --disable-auto-linux-mem-opt \ $(use_with ncurses curses) # sanity check due to common failure use ncurses && ! grep -qs "HAVE_LIBCURSES.*1" config.h && die "USE=ncurses but curses not found" multijob_finish } src_compile() { use netboot && emake -C "${WORKDIR}"/netboot w89c840_o_CFLAGS="-O" emake } src_test() { # non-default block size also give false pass/fails. unset BLOCK_SIZE emake -j1 check } src_install() { default if use netboot ; then exeinto /usr/lib/grub/${CHOST} doexe "${WORKDIR}"/netboot/stage2/{nbgrub,pxegrub} newexe "${WORKDIR}"/netboot/stage2/stage2 stage2.netboot fi pax-mark -m "${D}"/sbin/grub #330745 newdoc docs/menu.lst grub.conf.sample dodoc "${FILESDIR}"/grub.conf.gentoo [[ -n ${GRUB_STATIC_PACKAGE_BUILDING} ]] && \ mv "${D}"/usr/share/doc/{${PF},grub-static-${PF/grub-}} insinto /usr/share/grub doins "${DISTDIR}"/splash.xpm.gz } setup_boot_dir() { local boot_dir=$1 local dir=${boot_dir} mkdir -p "${dir}" [[ ! -L ${dir}/boot ]] && ln -s . "${dir}/boot" dir="${dir}/grub" if [[ ! -e ${dir} ]] ; then mkdir "${dir}" || die fi # change menu.lst to grub.conf if [[ ! -e ${dir}/grub.conf ]] && [[ -e ${dir}/menu.lst ]] ; then mv -f "${dir}"/menu.lst "${dir}"/grub.conf ewarn "*** IMPORTANT NOTE: menu.lst has been renamed to grub.conf" echo fi if [[ ! -e ${dir}/menu.lst ]]; then einfo "Linking from new grub.conf name to menu.lst" ln -snf grub.conf "${dir}"/menu.lst fi if [[ -e ${dir}/stage2 ]] ; then mv "${dir}"/stage2{,.old} ewarn "*** IMPORTANT NOTE: you must run grub and install" ewarn "the new version's stage1 to your MBR. Until you do," ewarn "stage1 and stage2 will still be the old version, but" ewarn "later stages will be the new version, which could" ewarn "cause problems such as an unbootable system." ewarn ewarn "This means you must use either grub-install or perform" ewarn "root/setup manually." ewarn ewarn "For more help, see the wiki:" ewarn "https://wiki.gentoo.org/wiki/GRUB" echo fi einfo "Copying files from /lib/grub and /usr/share/grub to ${dir}" for x in \ "${ROOT}"/lib*/grub/*/* \ "${ROOT}"/usr/share/grub/* ; do [[ -f ${x} ]] && cp -p "${x}" "${dir}"/ done if [[ ! -e ${dir}/grub.conf ]] ; then s="${ROOT}/usr/share/doc/${PF}/grub.conf.gentoo" [[ -e "${s}" ]] && cat "${s}" >${dir}/grub.conf [[ -e "${s}.gz" ]] && zcat "${s}.gz" >${dir}/grub.conf [[ -e "${s}.bz2" ]] && bzcat "${s}.bz2" >${dir}/grub.conf fi # Per bug 218599, we support grub.conf.install for users that want to run a # specific set of Grub setup commands rather than the default ones. grub_config=${dir}/grub.conf.install [[ -e ${grub_config} ]] || grub_config=${dir}/grub.conf if [[ -e ${grub_config} ]] ; then egrep \ -v '^[[:space:]]*(#|$|default|fallback|initrd|password|splashimage|timeout|title)' \ "${grub_config}" | \ /sbin/grub --batch \ --device-map="${dir}"/device.map \ > /dev/null fi # the grub default commands silently piss themselves if # the default file does not exist ahead of time if [[ ! -e ${dir}/default ]] ; then grub-set-default --root-directory="${boot_dir}" default fi einfo "Grub has been installed to ${boot_dir} successfully." } pkg_postinst() { mount-boot_mount_boot_partition if [[ -n ${DONT_MOUNT_BOOT} ]]; then elog "WARNING: you have DONT_MOUNT_BOOT in effect, so you must apply" elog "the following instructions for your /boot!" elog "Neglecting to do so may cause your system to fail to boot!" elog else setup_boot_dir "${ROOT}"/boot # Trailing output because if this is run from pkg_postinst, it gets mixed into # the other output. einfo "" fi elog "To interactively install grub files to another device such as a USB" elog "stick, just run the following and specify the directory as prompted:" elog " emerge --config =${PF}" elog "Alternately, you can export GRUB_ALT_INSTALLDIR=/path/to/use to tell" elog "grub where to install in a non-interactive way." # needs to be after we call setup_boot_dir mount-boot_pkg_postinst } pkg_config() { local dir if [ ! -d "${GRUB_ALT_INSTALLDIR}" ]; then einfo "Enter the directory where you want to setup grub:" read dir else dir="${GRUB_ALT_INSTALLDIR}" fi setup_boot_dir "${dir}" }