Dmesg with nvidia-kernel/glx-1.0.6629

dmesg-nv1.0.6629 (text/plain), 13.20 KB, created by John Shaw on 2004-12-02 09:15:16 UTC

Linux version 2.6.10-rc2 ([e-mail]) (gcc version 3.4.3 (Gentoo Linux 3.4.3, ssp-3.4.3-0, pie-8.7.6.6)) #1 Wed Nov 24 17:20:53 EST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
 BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e6c00 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000040fd800 (usable)
 BIOS-e820: 00000000040fd800 - 00000000040ff800 (ACPI data)
 BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS)
 BIOS-e820: 00000000040ffc00 - 0000000028000000 (usable)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
640MB LOWMEM available.
On node 0 totalpages: 163840
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 159744 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.1 present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6bb0
ACPI: RSDT (v001 PTLTD    RSDT   0x00000001 PTL  0x01000000) @ 0x040fdbcb
ACPI: FADT (v001 DELL   KUBLAI   0x20001013 PTL  0x000f4240) @ 0x040ff78c
ACPI: DSDT (v001  Intel  S2440BX 0x00000001 MSFT 0x01000004) @ 0x00000000
Built 1 zonelists
Kernel command line: acpi=force root=/dev/hde3 hdc=ide-cd hdd=ide-cd vga=791 ro
ide_setup: hdc=ide-cd
ide_setup: hdd=ide-cd
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 548.983 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 644348k/655360k available (2983k kernel code, 10448k reserved, 806k data, 464k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1085.44 BogoMIPS (lpj=542720)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
CPU: After vendor identify, caps:  0383f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps:        0383f9ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Level Trigger.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd993, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: Power Resource [PFAN] (on)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to [e-mail]
** so I can fix the driver.
devfs: 2004-01-31 Richard Gooch ([e-mail])
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 [e-mail]).
Limiting direct PCI/PCI transfers.
vesafb: framebuffer at 0xfc000000, mapped to 0xe8880000, using 3072k, total 16320k
vesafb: mode is 1024x768x16, linelength=2048, pages=8
vesafb: protected mode interface info at c000:03b8
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Fan [FAN1] (on)
ACPI: Processor [CPU0] (supports C1 C2)
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 565M
agpgart: AGP aperture is 64M @ 0xf8000000
Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds).
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport0: faking semi-colon
parport0: Printer, HEWLETT-PACKARD DESKJET 720C
lp0: using parport0 (polling).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
elevator: using anticipatory as default io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 10 (level, low) -> IRQ 10
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0f.0: 3Com PCI 3c905C Tornado at 0x1000. Vers LK1.1.19
hostap_crypt: registered algorithm 'NULL'
hostap_crypt: registered algorithm 'WEP'
hostap_crypt: registered algorithm 'TKIP'
hostap_crypt: registered algorithm 'CCMP'
hostap_pci: CVS (Jouni Malinen <[e-mail]>)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
hostap_pci: Registered netdevice wifi0
wifi0: Original COR value: 0x0
prism2_hw_init: initialized in 196 ms
wifi0: NIC: id=0x8013 v1.0.0
wifi0: PRI: id=0x15 v1.1.1
wifi0: STA: id=0x1f v1.7.4
wifi0: Intersil Prism2.5 PCI: mem=0xf4121000, irq=11
wifi0: registered netdevice wlan0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide1...
hdc: SONY CD-RW CRX220E1, ATAPI CD/DVD-ROM drive
hdd: TOSHIBA DVD-ROM SD-M1212, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
PDC20267: IDE controller at PCI slot 0000:00:10.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 9 (level, low) -> IRQ 9
PDC20267: chipset revision 2
PDC20267: 100% native mode on irq 9
PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
    ide2: BM-DMA at 0x1080-0x1087, BIOS settings: hde:DMA, hdf:DMA
    ide3: BM-DMA at 0x1088-0x108f, BIOS settings: hdg:DMA, hdh:DMA
Probing IDE interface ide2...
hde: WDC WD1200JB-00EVA0, ATA DISK drive
ide2 at 0x1420-0x1427,0x1416 on irq 9
Probing IDE interface ide3...
Probing IDE interface ide0...
ide0: Wait for ready failed before probe !
Probing IDE interface ide3...
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hde: max request size: 128KiB
hde: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hde: cache flushes supported
 /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 p4
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X DVD-ROM drive, 256kB Cache, UDMA(33)
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: irq 9, io base 0x10c0
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
i2c /dev entries driver
Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC).
ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 10 (level, low) -> IRQ 10
ALSA device list:
  #0: Sound Blaster Live! (rev.4) at 0x10e0, irq 10
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack version 2.1 (5120 buckets, 40960 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[e-mail]>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S5)
ACPI wakeup devices: 
PCI0 USB0 UAR1  KBC MICE 
ReiserFS: hde3: found reiserfs format "3.6" with standard journal
ReiserFS: hde3: using ordered data mode
ReiserFS: hde3: journal params: device hde3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hde3: checking transaction log (hde3)
ReiserFS: hde3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 464k freed
Adding 1249912k swap on /dev/hde2.  Priority:-1 extents:1
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-6629  Wed Nov  3 13:12:51 PST 2004
ReiserFS: hde4: found reiserfs format "3.6" with standard journal
ReiserFS: hde4: using ordered data mode
ReiserFS: hde4: journal params: device hde4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hde4: checking transaction log (hde4)
ReiserFS: hde4: Using r5 hash to sort names
agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode
int3: 0000 [#1]
PREEMPT 
Modules linked in: nvidia
CPU:    0
EIP:    0060:[<c04cc291>]    Tainted: P      VLI
EFLAGS: 00203286   (2.6.10-rc2) 
EIP is at pci_find_bus+0x1/0x60
eax: 00000001   ebx: 00000000   ecx: 00000001   edx: e51adbee
esi: e51adbee   edi: e51adbee   ebp: e51adbb0   esp: e51adb5c
ds: 007b   es: 007b   ss: 0068
Process X (pid: 6727, threadinfo=e51ac000 task=e5d33060)
Stack: e92e0fb7 00000000 00000001 00203000 00000000 c045474c 00000001 e7598800 
       e50c4800 e7598400 e90f506d 00000001 00000000 00000000 e51adbee e51adbee 
       e51adbc4 00203282 c045474c e50c4800 00000001 e51adbf0 e90e9e7d e7598800 
Call Trace:
 [<e92e0fb7>] os_pci_init_handle+0x3a/0x8e [nvidia]
 [<e90f506d>] _nv001746rm+0x25/0x2c [nvidia]
 [<e90e9e7d>] _nv002400rm+0x35/0x3c [nvidia]
 [<c0217db3>] pci_find_subsys+0xc3/0x110
 [<e90efb7e>] _nv002355rm+0x72/0x52c [nvidia]
 [<e90efb71>] _nv002355rm+0x65/0x52c [nvidia]
 [<e90e8a7a>] _nv001955rm+0x36/0xe0 [nvidia]
 [<e90fb9cc>] rm_update_agp_config+0x38/0x50 [nvidia]
 [<e90fb9dc>] rm_update_agp_config+0x48/0x50 [nvidia]
 [<e92def6b>] nv_agp_init+0xb1/0x19b [nvidia]
 [<e90f7522>] _nv001779rm+0xda/0x110 [nvidia]
 [<e90f74c5>] _nv001779rm+0x7d/0x110 [nvidia]
 [<e9200848>] _nv002152rm+0x98/0xa4 [nvidia]
 [<e90f7efd>] _nv004480rm+0x131/0x158 [nvidia]
 [<e90f7ee7>] _nv004480rm+0x11b/0x158 [nvidia]
 [<e92e0f61>] os_pci_device_present+0x21/0x3d [nvidia]
 [<e90f7d59>] _nv004434rm+0xa9/0x11c [nvidia]
 [<e90f7da9>] _nv004434rm+0xf9/0x11c [nvidia]
 [<e90e96d1>] _nv000806rm+0x15/0x24 [nvidia]
 [<e926a1fb>] _nv002078rm+0x73/0x94 [nvidia]
 [<e926a1ee>] _nv002078rm+0x66/0x94 [nvidia]
 [<e90f529e>] _nv001795rm+0x16/0x1c [nvidia]
 [<e9201e5a>] _nv002236rm+0x1e6/0x1f4 [nvidia]
 [<e9201cbd>] _nv002236rm+0x49/0x1f4 [nvidia]
 [<e9202470>] _nv002231rm+0x74/0x80 [nvidia]
 [<e9201a9e>] _nv002163rm+0x9e/0xb8 [nvidia]
 [<e9201a91>] _nv002163rm+0x91/0xb8 [nvidia]
 [<e90f7bb7>] _nv001315rm+0x37/0xc0 [nvidia]
 [<e90f7bde>] _nv001315rm+0x5e/0xc0 [nvidia]
 [<e91abb0d>] _nv001933rm+0x65/0xc4 [nvidia]
 [<e90f8392>] _nv001320rm+0x1de/0x2bc [nvidia]
 [<e90f8386>] _nv001320rm+0x1d2/0x2bc [nvidia]
 [<e90f54be>] _nv001820rm+0x12/0x18 [nvidia]
 [<e90fb08b>] rm_init_adapter+0x5f/0x8c [nvidia]
 [<e90fb07f>] rm_init_adapter+0x53/0x8c [nvidia]
 [<e92dc9e5>] nv_kern_open+0x2b3/0x34f [nvidia]
 [<e92dd67f>] nv_kern_isr+0x0/0x144 [nvidia]
 [<c015f1a0>] chrdev_open+0x160/0x200
 [<c015f040>] chrdev_open+0x0/0x200
 [<c0154c52>] dentry_open+0x1d2/0x270
 [<c0154a6c>] filp_open+0x5c/0x70
 [<c0154d45>] get_unused_fd+0x55/0xf0
 [<c0154ea9>] sys_open+0x49/0x90
 [<c010323b>] syscall_call+0x7/0xb
Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc <cc> cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc