example failing build log

build.log (text/plain), 5.53 KB, created by Kent Fredric (IRC: kent\n) (RETIRED) on 2016-07-10 13:50:18 UTC

[32;01m * [39;49;00mPackage:    dev-perl/cache-mmap-0.110.0-r1
[32;01m * [39;49;00mRepository: gentoo
[32;01m * [39;49;00mMaintainer: [e-mail]
[32;01m * [39;49;00mUSE:        abi_x86_64 amd64 elibc_glibc kernel_linux test userland_GNU
[32;01m * [39;49;00mFEATURES:   ccache compressdebug preserve-libs sandbox splitdebug test userpriv usersandbox
>>> Unpacking source...
>>> Unpacking Cache-Mmap-0.11.tar.gz to /var/tmp/portage/dev-perl/cache-mmap-0.110.0-r1/work
>>> Source unpacked in /var/tmp/portage/dev-perl/cache-mmap-0.110.0-r1/work
>>> Preparing source in /var/tmp/portage/dev-perl/cache-mmap-0.110.0-r1/work/Cache-Mmap-0.11 ...
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/dev-perl/cache-mmap-0.110.0-r1/work/Cache-Mmap-0.11 ...
 [32;01m*[0m Using ExtUtils::MakeMaker
 [32;01m*[0m perl Makefile.PL PREFIX=/usr INSTALLDIRS=vendor INSTALLMAN3DIR=none DESTDIR=/var/tmp/portage/dev-perl/cache-mmap-0.110.0-r1/image/
WARNING! I can't test for the existence of mmap() yet.
         If your system does not provide mmap(), you will be unable
         to compile this module.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Cache::Mmap
Writing MYMETA.yml and MYMETA.json
>>> Source configured.
>>> Compiling source in /var/tmp/portage/dev-perl/cache-mmap-0.110.0-r1/work/Cache-Mmap-0.11 ...
 [32;01m*[0m emake OTHERLDFLAGS=-Wl,-O1 -Wl,--as-needed
make -j3 --load-average=4 'OTHERLDFLAGS=-Wl,-O1 -Wl,--as-needed' 
"/usr/bin/perl" "/usr/lib64/perl5/5.24.0/ExtUtils/xsubpp"  -typemap "/usr/lib64/perl5/5.24.0/ExtUtils/typemap" -typemap "typemap"  Mmap.xs > Mmap.xsc && mv Mmap.xsc Mmap.c
Running Mkbootstrap for Cache::Mmap ()
chmod 644 "Mmap.bs"
cp Mmap.pm blib/lib/Cache/Mmap.pm
Warning: Found a 'CODE' section which seems to be using 'RETVAL' but no 'OUTPUT' section. in Mmap.xs, line 107
x86_64-pc-linux-gnu-gcc -c   -fwrapv -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -pipe -mtune=native -march=native   -DVERSION=\"0.11\" -DXS_VERSION=\"0.11\" -fPIC "-I/usr/lib64/perl5/5.24.0/x86_64-linux/CORE"   Mmap.c
In file included from [01m[KMmap.xs:40:0[m[K:
[01m[Kppport.h:227:0:[m[K [01;35m[Kwarning: [m[K"PERL_UNUSED_DECL" redefined
 #  define PERL_UNUSED_DECL
[01;32m[K ^[m[K
In file included from [01m[KMmap.xs:8:0[m[K:
[01m[K/usr/lib64/perl5/5.24.0/x86_64-linux/CORE/perl.h:313:0:[m[K [01;36m[Knote: [m[Kthis is the location of the previous definition
 #    define PERL_UNUSED_DECL __attribute__unused__
[01;32m[K ^[m[K
rm -f blib/arch/auto/Cache/Mmap/Mmap.so
x86_64-pc-linux-gnu-gcc  -shared -O2 -pipe -mtune=native -march=native -Wl,-O1 -Wl,--as-needed Mmap.o -Wl,-O1 -Wl,--as-needed -o blib/arch/auto/Cache/Mmap/Mmap.so 	\
     	\
  
chmod 755 blib/arch/auto/Cache/Mmap/Mmap.so
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Mmap.bs blib/arch/auto/Cache/Mmap/Mmap.bs 644
>>> Source compiled.
>>> Test phase: dev-perl/cache-mmap-0.110.0-r1
make -j3 --load-average=4 test TEST_VERBOSE=0 
Running Mkbootstrap for Cache::Mmap ()
chmod 644 "Mmap.bs"
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01simple.t ... 
t/01simple.t ... 1/46 
                        
t/01simple.t ... Failed 36/46 subtests 
t/02entries.t .. 
t/02entries.t .. 1/6 
                      
t/02entries.t .. Failed 3/6 subtests 
t/03corrupt.t .. 
t/03corrupt.t .. 1/26 
                       
t/03corrupt.t .. Failed 23/26 subtests 
t/04utf8.t ..... 
t/04utf8.t ..... 1/13 
                       
t/04utf8.t ..... Failed 11/13 subtests 
t/05keep.t ..... 
t/05keep.t ..... 1/9 
                      
t/05keep.t ..... Failed 7/9 subtests 

Test Summary Report
-------------------
t/01simple.t (Wstat: 139 Tests: 10 Failed: 0)
  Non-zero wait status: 139
  Parse errors: Bad plan.  You planned 46 tests but ran 10.
t/02entries.t (Wstat: 139 Tests: 3 Failed: 0)
  Non-zero wait status: 139
  Parse errors: Bad plan.  You planned 6 tests but ran 3.
t/03corrupt.t (Wstat: 139 Tests: 3 Failed: 0)
  Non-zero wait status: 139
  Parse errors: Bad plan.  You planned 26 tests but ran 3.
t/04utf8.t   (Wstat: 139 Tests: 2 Failed: 0)
  Non-zero wait status: 139
  Parse errors: Bad plan.  You planned 13 tests but ran 2.
t/05keep.t   (Wstat: 139 Tests: 2 Failed: 0)
  Non-zero wait status: 139
  Parse errors: Bad plan.  You planned 9 tests but ran 2.
Files=5, Tests=20,  1 wallclock secs ( 0.06 usr  0.02 sys +  0.58 cusr  0.13 csys =  0.79 CPU)
Result: FAIL
Failed 5/5 test programs. 0/20 subtests failed.
make: *** [Makefile:994: test_dynamic] Error 255
 [31;01m*[0m ERROR: dev-perl/cache-mmap-0.110.0-r1::gentoo failed (test phase):
 [31;01m*[0m   emake failed
 [31;01m*[0m 
 [31;01m*[0m If you need support, post the output of `emerge --info '=dev-perl/cache-mmap-0.110.0-r1::gentoo'`,
 [31;01m*[0m the complete build log and the output of `emerge -pqv '=dev-perl/cache-mmap-0.110.0-r1::gentoo'`.
 [31;01m*[0m The complete build log is located at '/var/log/portage/build/dev-perl/cache-mmap-0.110.0-r1:20160710-134456.log.gz'.
 [31;01m*[0m For convenience, a symlink to the build log is located at '/var/tmp/portage/dev-perl/cache-mmap-0.110.0-r1/temp/build.log.gz'.
 [31;01m*[0m The ebuild environment file is located at '/var/tmp/portage/dev-perl/cache-mmap-0.110.0-r1/temp/environment'.
 [31;01m*[0m Working directory: '/var/tmp/portage/dev-perl/cache-mmap-0.110.0-r1/work/Cache-Mmap-0.11'
 [31;01m*[0m S: '/var/tmp/portage/dev-perl/cache-mmap-0.110.0-r1/work/Cache-Mmap-0.11'