--- /usr/portage/app-emulation/lxc/files/lxc.initd.3	2015-06-14 14:42:16.479272827 +0000
+++ lxc.initd.4	2015-01-11 15:55:42.000000000 +0000
@@ -1,139 +1,177 @@
 #!/sbin/runscript
-# Copyright 1999-2015 Gentoo Foundation
+# Copyright 1999-2014 Gentoo Foundation
 # Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-emulation/lxc/files/lxc.initd.3,v 1.3 2015/06/13 11:54:25 hwoarang Exp $
+# $Header: $
 
+#_name=${SVCNAME#*.}
 CONTAINER=${SVCNAME#*.}
-
-LXC_PATH=`lxc-config lxc.lxcpath`
-
-lxc_get_configfile() {
-	if [ -f "${LXC_PATH}/${CONTAINER}.conf" ]; then
-		echo "${LXC_PATH}/${CONTAINER}.conf"
-	elif [ -f "${LXC_PATH}/${CONTAINER}/config" ]; then
-		echo "${LXC_PATH}/${CONTAINER}/config"
-	else
-		eerror "Unable to find a suitable configuration file."
-		eerror "If you set up the container in a non-standard"
-		eerror "location, please set the CONFIGFILE variable."
-		return 1
-	fi
-}
-
-[ $CONTAINER != $SVCNAME ] && CONFIGFILE=${CONFIGFILE:-$(lxc_get_configfile)}
-
-lxc_get_var() {
-	awk 'BEGIN { FS="[ \t]*=[ \t]*" } $1 == "'$1'" { print $2; exit }' ${CONFIGFILE}
-}
+name="Linux Container ${CONTAINER}"
+extra_commands="info halt unfreeze"
+extra_started_commands="freeze attach"
+
+description="Service to start Linux Container"
+description_info="Get info about container"
+description_halt="Forse to killing container"
+description_freeze="Freeze running container"
+description_unfreeze="Unfreeze freezed container"
+description_attach="Start a shell inside a running container"
+
+## if necessary, you can manually set the value of these variables in the /etc/rc.conf or /etc/conf.d/lxc
+## be sure when you change this variables
+: ${rc_lxc__cgrouppath:=/sys/fs/cgroup/*/lxc}
+# to avoid situation like as this https://bugs.gentoo.org/show_bug.cgi?id=416643
+: ${rc_lxc__lxcpath:=$(lxc-config lxc.lxcpath)}
+## https://bugs.gentoo.org/show_bug.cgi?id=525956
+[ -f "${rc_lxc__lxcpath}/${CONTAINER}.conf" ] && \
+    CONFIGFILE="${rc_lxc__lxcpath}/${CONTAINER}.conf" || \
+    CONFIGFILE="${rc_lxc__lxcpath}/${CONTAINER}/config"
+
+eval pidfile="\${rc_${SVCNAME//./_}__pidfile:-/run/lxc/\${CONTAINER}.pid}"
+eval logfile="\${rc_${SVCNAME//./_}__logfile:-/var/log/lxc/\${CONTAINER}.log}"
+eval logpriority="\${rc_${SVCNAME//./_}__logpriority:-\${rc_lxc__logpriority:-WARN}}"
+eval CONSOLELOG="\$rc_${SVCNAME//./_}__consolelog"
+
+command="/usr/sbin/lxc-start"
+command_args="--name '${CONTAINER}' --rcfile '${CONFIGFILE}' --logfile '${logfile}' --logpriority '${logpriority}' --pidfile '${pidfile}' --daemon${CONSOLELOG:+ --console-log '${CONSOLELOG}'}"
+required_files=${CONFIGFILE}
 
 lxc_get_net_link_type() {
-	awk 'BEGIN { FS="[ \t]*=[ \t]*"; _link=""; _type="" }
-		$1 == "lxc.network.type" {_type=$2;}
-		$1 == "lxc.network.link" {_link=$2;}
-		{if(_link != "" && _type != ""){
-			printf("%s:%s\n", _link, _type );
-			_link=""; _type="";
-		}; }' <${CONFIGFILE}
+    awk 'BEGIN { FS="[ \t]*=[ \t]*"; _link=""; _type="" }
+        $1 == "lxc.network.type" {_type=$2;}
+        $1 == "lxc.network.link" {_link=$2;}
+        {if(_link != "" && _type != ""){
+            printf("%s:%s\n", _link, _type );
+            _link=""; _type="";
+        }; }' < "${CONFIGFILE}"
 }
 
 checkconfig() {
-	if [ ${CONTAINER} = ${SVCNAME} ]; then
-		eerror "You have to create an init script for each container:"
-		eerror " ln -s lxc /etc/init.d/lxc.container"
-		return 1
-	fi
-
-	# no need to output anything, the function takes care of that.
-	[ -z "${CONFIGFILE}" ] && return 1
-
-	utsname=$(lxc_get_var lxc.utsname)
-	if [ ${CONTAINER} != ${utsname} ]; then
-	    eerror "You should use the same name for the service and the"
-	    eerror "container. Right now the container is called ${utsname}"
-	    return 1
-	fi
+    if [[ "${SVCNAME}" = "${CONTAINER}" ]]; then
+        eerror "You have to create an init script for each container:"
+        eerror " ln -s lxc /etc/init.d/lxc.container"
+        return 1
+    fi
+    local _ret=0
+    ## protection against bad SVCNAME
+    ## Since ${SVCNAME//./_} may be used in some rc_.. environment, names must be correct
+    if [[ -n "${SVCNAME//[0-9A-Za-z.]/}"  ]]; then
+        eerror "Bad service name '${SVCNAME}'"
+        eerror "You can not use dashes in service name"
+        _ret=1
+    fi
+    if [[ "${SVCNAME//_/}" != "${SVCNAME}" ]]; then
+        ewarn "This is a bad idea to use underline in the name of container service"
+        ewarn "Some environments may conflict with services like as '${SVCNAME//_/.}'"
+    fi
+    return $_ret
 }
 
 depend() {
-	# be quiet, since we have to run depend() also for the
-	# non-muxed init script, unfortunately.
-	checkconfig 2>/dev/null || return 0
-
-	config ${CONFIGFILE}
-	need localmount
-
-	local _x _if
-	for _x in $(lxc_get_net_link_type); do
-		_if=${_x%:*}
-		case "${_x##*:}" in
-			# when the network type is set to phys, we can make use of a
-			# network service (for instance to set it up before we disable
-			# the net_admin capability), but we might also not set it up
-			# at all on the host and leave the net_admin capable service
-			# to take care of it.
-			phys)	use net.${_if} ;;
-			*)	need net.${_if} ;;
-		esac
-	done
-}
-
-start() {
-	checkconfig || return 1
-	rm /var/log/lxc/${CONTAINER}.log
-
-	rootpath=$(lxc_get_var lxc.rootfs)
-
-	# Check the format of our init and the chroot's init, to see
-	# if we have to use linux32 or linux64; always use setarch
-	# when required, as that makes it easier to deal with
-	# x32-based containers.
-	case $(scanelf -BF '%a#f' ${rootpath}/sbin/init) in
-		EM_X86_64)	setarch=linux64;;
-		EM_386)		setarch=linux32;;
-	esac
-
-	ebegin "Starting ${CONTAINER}"
-	env -i ${setarch} $(type -p lxc-start) -l WARN -n ${CONTAINER} -f ${CONFIGFILE} -d -o /var/log/lxc/${CONTAINER}.log
-	sleep 0.5
-
-	# lxc-start -d will _always_ report a correct startup, even if it
-	# failed, so rather than trust that, check that the cgroup exists.
-	[ -d /sys/fs/cgroup/cpuset/lxc/${CONTAINER} ]
-	eend $?
+    checkconfig &>/dev/null || return 0
+    config "${CONFIGFILE}"
+    need localmount
+    local _x _if
+    for _x in $(lxc_get_net_link_type); do
+        _if=${_x%:*}
+        case "${_x##*:}" in
+            # when the network type is set to phys, we can make use of a
+            # network service (for instance to set it up before we disable
+            # the net_admin capability), but we might also not set it up
+            # at all on the host and leave the net_admin capable service
+            # to take care of it.
+            phys)	use net.${_if} ;;
+            *)	need net.${_if} ;;
+        esac
+    done
+}
+
+start_pre() {
+    checkconfig || return 1
+    if lxc-info -n "${CONTAINER}" 2>/dev/null| grep -qiE '^state:\s+stopped$'; then
+        local _c _p=
+        for _c in ${rc_lxc__cgrouppath}/"${CONTAINER}"; do
+            [ -e "$_c" ] && \
+                _p="$_p '$_c'" && \
+                eerror "Found '$_c'. Perhaps the last time the container '${CONTAINER}' was completed with an error."
+        done
+        [ -z "$_p" ] && \
+            checkpath -q -d "$(dirname "${pidfile}")" && \
+            return 0
+        ewarn "Possibly for you can help comand: rmdir${_p}"
+        return 1
+    else
+        if lxc-info -n "${CONTAINER}" 2>/dev/null | grep -qie '^state:'; then
+            eerror "Can't start ${name}. It's not sopped."
+        else
+            eerror "Can't start ${name}. It's not found."
+        fi
+    fi
+}
+
+start_post() {
+    ebegin "Try to make sure ${name} started correctly"
+    ewaitfile 15 ${rc_lxc__cgrouppath}/"${CONTAINER}"
+    eend $?
+}
+
+_halt(){
+    eval local HALT_TIMEOUT=\${rc_${SVCNAME//./_}__halt_timeout-${rc_lxc__halt_timeout-15}}
+    ebegin "Halting ${name}"
+    ( lxc-stop --name "${CONTAINER}" --kill --nowait & ) &>/dev/null
+    lxc-wait --name "${CONTAINER}" -s STOPPED ${HALT_TIMEOUT:+-t ${HALT_TIMEOUT}}
+    if eend $? "Some error on halting ${name}"; then
+        mark_service_stopped "${SVCNAME}"
+    else
+        mark_service_stopping "${SVCNAME}"
+        return 1
+    fi
+}
+
+halt() {
+    service_stopped "${SVCNAME}" && ewarn "WARNING: ${SVCNAME} is already marked as stopped, but I still try to kill ${name}"
+    _halt
 }
 
 stop() {
-	checkconfig || return 1
+    eval local STOP_PWR_TIMEOUT=\${rc_${SVCNAME//./_}__stop_power_timeout-${rc_lxc__stop_power_timeout-15}}
+    eval local STOP_NOKILL_TIMEOUT=\${rc_${SVCNAME//./_}__stop_nokill_timeout-${rc_lxc__stop_nokill_timeout-15}}
+    if ! service_wasinactive "${SVCNAME}"; then
+        if [ -n "${STOP_PWR_TIMEOUT}" ]; then
+            ebegin "Sending signal to stop ${name}"
+            kill -s SIGPWR "$(lxc-info --pid --no-humanize --name "${CONTAINER}")" &>/dev/null
+            lxc-wait --name "${CONTAINER}" -s STOPPED -t ${STOP_PWR_TIMEOUT}
+            eend $? && return 0
+        fi
+        if [ -n "${STOP_NOKILL_TIMEOUT}" ]; then
+            ebegin "Try to request a clean shutdown ${name}"
+            ( lxc-stop --name "${CONTAINER}" --nokill & ) &>/dev/null
+            lxc-wait --name "${CONTAINER}" -s STOPPED -t ${STOP_NOKILL_TIMEOUT}
+            eend $? && return 0
+        fi
+    fi
+    _halt
+}
+
+freeze() {
+    ebegin "Freeze all the processes of the container ${CONTAINER}"
+    lxc-freeze --name "${CONTAINER}"
+    eend $? "Problem whith freezing container ${CONTAINER}" && mark_service_inactive "${SVCNAME}"
+}
+
+unfreeze() {
+    if service_inactive "${SVCNAME}"; then
+        ebegin "Unfreeze container ${CONTAINER}"
+        lxc-unfreeze --name "${CONTAINER}"
+        eend $? "Problem whith unfreezing container ${CONTAINER}" && mark_service_started "${SVCNAME}"
+    else
+        eerror "${SVCNAME}: cannot \`unfreeze' as it has not been started"
+    fi
+}
 
+info() {
+    lxc-info --name "${CONTAINER}"
+}
 
-	if ! [ -d /sys/fs/cgroup/cpuset/lxc/${CONTAINER} ]; then
-	    ewarn "${CONTAINER} doesn't seem to be started."
-	    return 0
-	fi
-
-	init_pid=$(lxc-info -n ${CONTAINER} --pid | awk '{ print $2 }')
-
-	if [ -z "${init_pid}" ]; then
-	    ewarn "${CONTAINER} doesn't seem to be running."
-	    return 0
-	fi
-
-	ebegin "Shutting down system in ${CONTAINER}"
-	kill -PWR ${init_pid}
-	eend $?
-
-	TIMEOUT=${TIMEOUT:-30}
-	i=0
-	while [ -n "$(pgrep -P ${init_pid})" -a $i -lt ${TIMEOUT} ]; do
-		sleep 1
-		i=$(expr $i + 1)
-	done
-
-	if [ -n "${missingprocs}" ]; then
-		ewarn "Something failed to properly shut down in ${CONTAINER}"
-	fi
-
-	ebegin "Stopping ${CONTAINER}"
-	lxc-stop -n ${CONTAINER}
-	eend $?
+attach() {
+    lxc-attach --name "${CONTAINER}"
 }