Go to:
Gentoo Home
Documentation
Forums
Lists
Bugs
Planet
Store
Wiki
Get Gentoo!
Gentoo's Bugzilla – Attachment 401020 Details for
Bug 546230
Kernel: gentoo-sources: error FIFO underrun
Home
|
New
–
[Ex]
|
Browse
|
Search
|
Privacy Policy
|
[?]
|
Reports
|
Requests
|
Help
|
New Account
|
Log In
[x]
|
Forgot Password
Login:
[x]
full lspci with dmesg
lspci (text/plain), 85.11 KB, created by
Lagu
on 2015-04-11 03:06:39 UTC
(
hide
)
Description:
full lspci with dmesg
Filename:
MIME Type:
Creator:
Lagu
Created:
2015-04-11 03:06:39 UTC
Size:
85.11 KB
patch
obsolete
>00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) > Subsystem: ASUSTeK Computer Inc. N56VZ > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information: Len=0c <?> > Kernel driver in use: ivb_uncore > >00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: f6000000-f70fffff > Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [88] Subsystem: ASUSTeK Computer Inc. N56VZ > Capabilities: [80] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: feeff00c Data: 4181 > Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 256 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <8us > ClockPM- Surprise- LLActRep- BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- > Slot #1, PowerLimit 75.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet+ LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd- > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- > EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending+ InProgress- > Capabilities: [140 v1] Root Complex Link > Desc: PortNumber=02 ComponentID=01 EltType=Config > Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ > Addr: 00000000fed19000 > Capabilities: [d94 v1] #19 > Kernel driver in use: pcieport > >00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller]) > Subsystem: ASUSTeK Computer Inc. Device 1477 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 29 > Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M] > Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] > Region 4: I/O ports at f000 [size=64] > Expansion ROM at <unassigned> [disabled] > Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: feeff00c Data: 4162 > Capabilities: [d0] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [a4] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: i915 > Kernel modules: i915 > >00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI]) > Subsystem: ASUSTeK Computer Inc. N56VZ > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 26 > Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=64K] > Capabilities: [70] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+ > Address: 00000000feeff00c Data: 41d1 > Kernel driver in use: xhci_hcd > Kernel modules: xhci_pci > >00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) > Subsystem: ASUSTeK Computer Inc. N56VZ > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at f7a1a000 (64-bit, non-prefetchable) [size=16] > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > >00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) > Subsystem: ASUSTeK Computer Inc. N56VZ > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f7a18000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Capabilities: [98] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: ehci-pci > Kernel modules: ehci_pci > >00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) > Subsystem: ASUSTeK Computer Inc. Device 1c03 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 28 > Region 0: Memory at f7a10000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000feeff00c Data: 4152 > Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE- FLReset+ > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > Status: NegoPending- InProgress- > VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22 > Status: NegoPending- InProgress- > Capabilities: [130 v1] Root Complex Link > Desc: PortNumber=0f ComponentID=00 EltType=Config > Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ > Addr: 00000000fed1c000 > Kernel driver in use: snd_hda_intel > Kernel modules: snd_hda_intel > >00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- > Slot #0, PowerLimit 10.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd- > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- > EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- > Address: 00000000 Data: 0000 > Capabilities: [90] Subsystem: ASUSTeK Computer Inc. N56VZ > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: pcieport > >00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: f7900000-f79fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- > Slot #1, PowerLimit 10.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet- LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd- > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- > EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- > Address: 00000000 Data: 0000 > Capabilities: [90] Subsystem: ASUSTeK Computer Inc. N56VZ > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: pcieport > >00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: f7800000-f78fffff > Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- > Slot #3, PowerLimit 10.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet- LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd- > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- > EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- > Address: 00000000 Data: 0000 > Capabilities: [90] Subsystem: ASUSTeK Computer Inc. N56VZ > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: pcieport > >00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) > Subsystem: ASUSTeK Computer Inc. N56VZ > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 0: Memory at f7a17000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Capabilities: [98] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: ehci-pci > Kernel modules: ehci_pci > >00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) > Subsystem: ASUSTeK Computer Inc. N56VZ > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information: Len=0c <?> > >00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) > Subsystem: ASUSTeK Computer Inc. N56VZ > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 25 > Region 0: I/O ports at f0b0 [size=8] > Region 1: I/O ports at f0a0 [size=4] > Region 2: I/O ports at f090 [size=8] > Region 3: I/O ports at f080 [size=4] > Region 4: I/O ports at f060 [size=32] > Region 5: Memory at f7a16000 (32-bit, non-prefetchable) [size=2K] > Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: feeff00c Data: 41b1 > Capabilities: [70] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 > Capabilities: [b0] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: ahci > Kernel modules: ahci > >00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) > Subsystem: ASUSTeK Computer Inc. N56VZ > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at f7a15000 (64-bit, non-prefetchable) [size=256] > Region 4: I/O ports at f040 [size=32] > Kernel modules: i2c_i801 > >01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 740M] (rev ff) (prog-if ff) > !!! Unknown header type 7f > Kernel modules: nouveau, nvidia > >03:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01) > Subsystem: AzureWave Device 2c97 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at f7900000 (64-bit, non-prefetchable) [size=512K] > Expansion ROM at f7980000 [disabled] [size=64K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+ > Address: 0000000000000000 Data: 0000 > Masking: 00000000 Pending: 00000000 > Capabilities: [70] Express (v2) Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- > EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [140 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00 > Kernel driver in use: ath9k > Kernel modules: ath9k > >04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411 PCI Express Card Reader (rev 01) > Subsystem: ASUSTeK Computer Inc. Device 1477 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 11 > Region 0: Memory at f7800000 (32-bit, non-prefetchable) [size=64K] > Capabilities: [40] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express (v2) Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 <64us > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- > EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- > Capabilities: [b0] MSI-X: Enable- Count=1 Masked- > Vector table: BAR=0 offset=00000000 > PBA: BAR=0 offset=00000000 > Capabilities: [d0] Vital Product Data > Not readable > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- > Capabilities: [140 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00 > >04:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a) > Subsystem: ASUSTeK Computer Inc. Device 1477 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 27 > Region 0: I/O ports at d000 [size=256] > Region 2: Memory at f2104000 (64-bit, prefetchable) [size=4K] > Region 4: Memory at f2100000 (64-bit, prefetchable) [size=16K] > Capabilities: [40] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000feeff00c Data: 4122 > Capabilities: [70] Express (v2) Endpoint, MSI 01 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 4096 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 <64us > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- > EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- > Capabilities: [b0] MSI-X: Enable- Count=4 Masked- > Vector table: BAR=4 offset=00000000 > PBA: BAR=4 offset=00000800 > Capabilities: [d0] Vital Product Data > Unknown small resource type 00, will not decode more. > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- > Capabilities: [160 v1] Device Serial Number 03-06-83-21-68-4c-e0-00 > Kernel driver in use: r8169 > Kernel modules: r8169 > > > >[ 0.703879] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] >[ 0.703959] pci 0000:00:1c.0: PCI bridge to [bus 02] >[ 0.704049] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000 >[ 0.704080] pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit] >[ 0.704145] pci 0000:03:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref] >[ 0.704234] pci 0000:03:00.0: supports D1 D2 >[ 0.704236] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold >[ 0.704266] pci 0000:03:00.0: System wakeup disabled by ACPI >[ 0.733898] pci 0000:00:1c.1: PCI bridge to [bus 03] >[ 0.733911] pci 0000:00:1c.1: bridge window [mem 0xf7900000-0xf79fffff] >[ 0.734019] pci 0000:04:00.0: [10ec:5289] type 00 class 0xff0000 >[ 0.734042] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf780ffff] >[ 0.734221] pci 0000:04:00.0: supports D1 D2 >[ 0.734222] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold >[ 0.734256] pci 0000:04:00.0: System wakeup disabled by ACPI >[ 0.734315] pci 0000:04:00.2: [10ec:8168] type 00 class 0x020000 >[ 0.734338] pci 0000:04:00.2: reg 0x10: [io 0xd000-0xd0ff] >[ 0.734373] pci 0000:04:00.2: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref] >[ 0.734394] pci 0000:04:00.2: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref] >[ 0.734499] pci 0000:04:00.2: supports D1 D2 >[ 0.734501] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold >[ 0.763939] pci 0000:00:1c.3: PCI bridge to [bus 04] >[ 0.763962] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] >[ 0.763966] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff] >[ 0.763972] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] >[ 0.764005] pci_bus 0000:00: on NUMA node 0 >[ 0.764007] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) >[ 0.824484] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) >[ 0.824533] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12) >[ 0.824578] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12) >[ 0.824622] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12) >[ 0.824666] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled. >[ 0.824712] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled. >[ 0.824758] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 12) >[ 0.824803] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12) >[ 0.824961] ACPI: Enabled 4 GPEs in block 00 to 3F >[ 0.825024] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 >[ 0.825089] vgaarb: setting as boot device: PCI:0000:00:02.0 >[ 0.825092] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none >[ 0.825097] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none >[ 0.825099] vgaarb: loaded >[ 0.825101] vgaarb: bridge control possible 0000:01:00.0 >[ 0.825102] vgaarb: no bridge control possible 0000:00:02.0 >[ 0.825174] SCSI subsystem initialized >[ 0.825395] PCI: Using ACPI for IRQ routing >[ 0.826956] PCI: pci_cache_line_size set to 64 bytes >[ 0.827012] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] >[ 0.827013] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] >[ 0.827015] e820: reserve RAM buffer [mem 0xc9744000-0xcbffffff] >[ 0.827020] e820: reserve RAM buffer [mem 0xc9d5f000-0xcbffffff] >[ 0.827025] e820: reserve RAM buffer [mem 0xc9d67000-0xcbffffff] >[ 0.827030] e820: reserve RAM buffer [mem 0xc9f09000-0xcbffffff] >[ 0.827035] e820: reserve RAM buffer [mem 0xc9f56000-0xcbffffff] >[ 0.827039] e820: reserve RAM buffer [mem 0xc9f7f000-0xcbffffff] >[ 0.827044] e820: reserve RAM buffer [mem 0xc9f98000-0xcbffffff] >[ 0.827048] e820: reserve RAM buffer [mem 0xc9fa6000-0xcbffffff] >[ 0.827052] e820: reserve RAM buffer [mem 0xc9fb6000-0xcbffffff] >[ 0.827056] e820: reserve RAM buffer [mem 0xc9fc2000-0xcbffffff] >[ 0.827060] e820: reserve RAM buffer [mem 0xc9ff3000-0xcbffffff] >[ 0.827063] e820: reserve RAM buffer [mem 0xca004000-0xcbffffff] >[ 0.827066] e820: reserve RAM buffer [mem 0xca03e000-0xcbffffff] >[ 0.827069] e820: reserve RAM buffer [mem 0xca040000-0xcbffffff] >[ 0.827072] e820: reserve RAM buffer [mem 0xca043000-0xcbffffff] >[ 0.827075] e820: reserve RAM buffer [mem 0xca05f000-0xcbffffff] >[ 0.827077] e820: reserve RAM buffer [mem 0xca88a000-0xcbffffff] >[ 0.827079] e820: reserve RAM buffer [mem 0xcacdc000-0xcbffffff] >[ 0.827080] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff] >[ 0.827082] e820: reserve RAM buffer [mem 0x22f200000-0x22fffffff] >[ 0.827266] Switched to clocksource hpet >[ 0.829115] pnp: PnP ACPI init >[ 0.829193] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved >[ 0.829198] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) >[ 0.887475] system 00:01: [io 0x0680-0x069f] has been reserved >[ 0.887479] system 00:01: [io 0x1000-0x100f] has been reserved >[ 0.887481] system 00:01: [io 0xffff] has been reserved >[ 0.887484] system 00:01: [io 0xffff] has been reserved >[ 0.887486] system 00:01: [io 0x0400-0x0453] could not be reserved >[ 0.887489] system 00:01: [io 0x0458-0x047f] has been reserved >[ 0.887491] system 00:01: [io 0x0500-0x057f] has been reserved >[ 0.887494] system 00:01: [io 0x164e-0x164f] has been reserved >[ 0.887497] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) >[ 0.887526] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) >[ 0.887573] system 00:03: [io 0x0454-0x0457] has been reserved >[ 0.887577] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) >[ 0.887625] system 00:04: [io 0x04d0-0x04d1] has been reserved >[ 0.887628] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) >[ 0.887684] pnp 00:05: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) >[ 0.887722] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active) >[ 0.887879] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved >[ 0.887882] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved >[ 0.887885] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved >[ 0.887888] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved >[ 0.887891] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved >[ 0.887894] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved >[ 0.887897] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved >[ 0.887900] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved >[ 0.887902] system 00:07: [mem 0xff000000-0xffffffff] has been reserved >[ 0.887905] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved >[ 0.887908] system 00:07: [mem 0xcfe00000-0xcfe00fff] has been reserved >[ 0.887911] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) >[ 0.887979] system 00:08: [mem 0xcfe00000-0xcfe00fff] has been reserved >[ 0.887982] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) >[ 0.888110] system 00:09: [mem 0x20000000-0x201fffff] has been reserved >[ 0.888113] system 00:09: [mem 0x40004000-0x40004fff] has been reserved >[ 0.888116] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) >[ 0.888145] pnp: PnP ACPI: found 10 devices >[ 0.892717] pci 0000:00:01.0: PCI bridge to [bus 01] >[ 0.892720] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] >[ 0.892724] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] >[ 0.892728] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] >[ 0.892732] pci 0000:00:1c.0: PCI bridge to [bus 02] >[ 0.892744] pci 0000:00:1c.1: PCI bridge to [bus 03] >[ 0.892750] pci 0000:00:1c.1: bridge window [mem 0xf7900000-0xf79fffff] >[ 0.892759] pci 0000:00:1c.3: PCI bridge to [bus 04] >[ 0.892763] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] >[ 0.892769] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff] >[ 0.892775] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] >[ 0.892783] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] >[ 0.892784] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] >[ 0.892786] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] >[ 0.892787] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] >[ 0.892788] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] >[ 0.892790] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] >[ 0.892791] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] >[ 0.892793] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff] >[ 0.892794] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] >[ 0.892796] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] >[ 0.892797] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] >[ 0.892799] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff] >[ 0.892800] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] >[ 0.892801] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff] >[ 0.892803] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref] >[ 0.892862] NET: Registered protocol family 2 >[ 0.893043] TCP established hash table entries: 65536 (order: 7, 524288 bytes) >[ 0.893132] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >[ 0.893248] TCP: Hash tables configured (established 65536 bind 65536) >[ 0.893263] TCP: reno registered >[ 0.893266] UDP hash table entries: 4096 (order: 5, 131072 bytes) >[ 0.893287] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) >[ 0.893375] NET: Registered protocol family 1 >[ 0.893391] pci 0000:00:02.0: Video device with shadowed ROM >[ 0.937493] PCI: CLS 64 bytes, default 64 >[ 0.937533] Trying to unpack rootfs image as initramfs... >[ 1.382006] Freeing initrd memory: 4040K (ffff88003780c000 - ffff880037bfe000) >[ 1.382017] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >[ 1.382020] software IO TLB [mem 0xba115000-0xbe115000] (64MB) mapped at [ffff8800ba115000-ffff8800be114fff] >[ 1.382386] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer >[ 1.382778] futex hash table entries: 2048 (order: 5, 131072 bytes) >[ 1.382837] audit: initializing netlink subsys (disabled) >[ 1.382851] audit: type=2000 audit(1428707448.320:1): initialized >[ 1.383282] VFS: Disk quotas dquot_6.5.2 >[ 1.383307] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >[ 1.383546] squashfs: version 4.0 (2009/01/31) Phillip Lougher >[ 1.383654] SGI XFS with ACLs, security attributes, realtime, no debug enabled >[ 1.383961] ocfs2: Registered cluster interface o2cb >[ 1.384004] OCFS2 User DLM kernel interface loaded >[ 1.384366] gfs2: GFS2 installed >[ 1.384619] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) >[ 1.384623] io scheduler noop registered >[ 1.384625] io scheduler deadline registered >[ 1.384642] io scheduler cfq registered (default) >[ 1.385227] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled >[ 1.385590] Linux agpgart interface v0.103 >[ 1.385628] efifb: probing for efifb >[ 1.385643] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004100000, using 3072k, total 3072k >[ 1.385646] efifb: mode is 1024x768x32, linelength=4096, pages=1 >[ 1.385647] efifb: scrolling: redraw >[ 1.385650] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 >[ 1.388014] Console: switching to colour frame buffer device 128x48 >[ 1.390423] fb0: EFI VGA frame buffer device >[ 1.390450] intel_idle: MWAIT substates: 0x21120 >[ 1.390451] intel_idle: v0.4 model 0x3A >[ 1.390451] intel_idle: lapic_timer_reliable_states 0xffffffff >[ 1.392021] brd: module loaded >[ 1.392633] loop: module loaded >[ 1.392727] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 >[ 1.394802] i8042: Detected active multiplexing controller, rev 1.1 >[ 1.395759] serio: i8042 KBD port at 0x60,0x64 irq 1 >[ 1.395781] serio: i8042 AUX0 port at 0x60,0x64 irq 12 >[ 1.395801] serio: i8042 AUX1 port at 0x60,0x64 irq 12 >[ 1.395821] serio: i8042 AUX2 port at 0x60,0x64 irq 12 >[ 1.395842] serio: i8042 AUX3 port at 0x60,0x64 irq 12 >[ 1.395944] mousedev: PS/2 mouse device common for all mice >[ 1.396049] rtc_cmos 00:02: RTC can wake from S4 >[ 1.396197] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 >[ 1.396249] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs >[ 1.396317] hidraw: raw HID events driver (C) Jiri Kosina >[ 1.396499] TCP: cubic registered >[ 1.396514] NET: Registered protocol family 17 >[ 1.396937] registered taskstats version 1 >[ 1.397440] rtc_cmos 00:02: setting system clock to 2015-04-10 23:10:49 UTC (1428707449) >[ 1.881620] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input1 >[ 1.922196] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 >[ 2.006332] Freeing unused kernel memory: 836K (ffffffff81704000 - ffffffff817d5000) >[ 2.233061] systemd-udevd[1238]: starting version 216 >[ 2.234166] random: systemd-udevd urandom read with 6 bits of entropy available >[ 2.246820] ACPI: bus type USB registered >[ 2.247809] usbcore: registered new interface driver usbfs >[ 2.247824] libata version 3.00 loaded. >[ 2.248578] ahci 0000:00:1f.2: version 3.0 >[ 2.248777] usbcore: registered new interface driver hub >[ 2.248927] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode >[ 2.248931] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst >[ 2.251587] usbcore: registered new device driver usb >[ 2.253820] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >[ 2.256486] ehci-pci: EHCI PCI platform driver >[ 2.269135] scsi host0: ahci >[ 2.270198] scsi host1: ahci >[ 2.271201] scsi host2: ahci >[ 2.272249] scsi host3: ahci >[ 2.273279] scsi host4: ahci >[ 2.274293] scsi host5: ahci >[ 2.275173] ata1: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16100 irq 25 >[ 2.276028] ata2: DUMMY >[ 2.276874] ata3: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16200 irq 25 >[ 2.277732] ata4: DUMMY >[ 2.278585] ata5: DUMMY >[ 2.279400] ata6: DUMMY >[ 2.280404] ehci-pci 0000:00:1a.0: EHCI Host Controller >[ 2.281237] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 >[ 2.282072] ehci-pci 0000:00:1a.0: debug port 2 >[ 2.286794] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported >[ 2.286807] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a18000 >[ 2.298555] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 >[ 2.299596] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 >[ 2.300416] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 2.301222] usb usb1: Product: EHCI Host Controller >[ 2.302018] usb usb1: Manufacturer: Linux 3.19.3-gentoo ehci_hcd >[ 2.302823] usb usb1: SerialNumber: 0000:00:1a.0 >[ 2.303808] hub 1-0:1.0: USB hub found >[ 2.304658] hub 1-0:1.0: 2 ports detected >[ 2.305797] ehci-pci 0000:00:1d.0: EHCI Host Controller >[ 2.306628] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 >[ 2.307472] ehci-pci 0000:00:1d.0: debug port 2 >[ 2.312204] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported >[ 2.312217] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a17000 >[ 2.328578] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 >[ 2.329638] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 >[ 2.330457] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 2.331274] usb usb2: Product: EHCI Host Controller >[ 2.332088] usb usb2: Manufacturer: Linux 3.19.3-gentoo ehci_hcd >[ 2.332896] usb usb2: SerialNumber: 0000:00:1d.0 >[ 2.333890] hub 2-0:1.0: USB hub found >[ 2.334726] hub 2-0:1.0: 2 ports detected >[ 2.378629] tsc: Refined TSC clocksource calibration: 2394.564 MHz >[ 2.618848] usb 1-1: new high-speed USB device number 2 using ehci-pci >[ 2.628839] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >[ 2.629656] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >[ 2.636776] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out >[ 2.637580] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded >[ 2.637584] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out >[ 2.640640] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded >[ 2.640646] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out >[ 2.644622] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/133 >[ 2.645380] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) >[ 2.647410] ata3.00: ATAPI: Slimtype DVD A DS8A9SH, EAA2, max UDMA/100 >[ 2.648849] usb 2-1: new high-speed USB device number 2 using ehci-pci >[ 2.652542] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out >[ 2.653369] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded >[ 2.653375] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out >[ 2.660444] ata1.00: configured for UDMA/133 >[ 2.661375] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5 >[ 2.662513] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >[ 2.663094] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded >[ 2.663097] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out >[ 2.663448] ata3.00: configured for UDMA/100 >[ 2.665024] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8A9SH EAA2 PQ: 0 ANSI: 5 >[ 2.665913] sd 0:0:0:0: [sda] 4096-byte physical blocks >[ 2.666962] sd 0:0:0:0: [sda] Write Protect is off >[ 2.667784] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >[ 2.667878] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >[ 2.684146] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray >[ 2.685053] cdrom: Uniform CD-ROM driver Revision: 3.20 >[ 2.686127] sr 2:0:0:0: Attached scsi CD-ROM sr0 >[ 2.727741] Alternate GPT is invalid, using primary GPT. >[ 2.728654] sda: sda1 sda2 sda3 sda4 sda5 sda6 >[ 2.730758] sd 0:0:0:0: [sda] Attached SCSI disk >[ 2.769659] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 >[ 2.770562] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >[ 2.771763] hub 1-1:1.0: USB hub found >[ 2.772912] hub 1-1:1.0: 6 ports detected >[ 2.809373] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 >[ 2.810294] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >[ 2.811455] hub 2-1:1.0: USB hub found >[ 2.812473] hub 2-1:1.0: 6 ports detected >[ 3.049395] usb 1-1.1: new full-speed USB device number 3 using ehci-pci >[ 3.161669] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362 >[ 3.162581] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >[ 3.163489] usb 1-1.1: Product: Bluetooth USB Host Controller >[ 3.164398] usb 1-1.1: Manufacturer: Atheros Communications >[ 3.165312] usb 1-1.1: SerialNumber: Alaska Day 2006 >[ 3.239553] usb 1-1.3: new high-speed USB device number 4 using ehci-pci >[ 3.379621] Switched to clocksource tsc >[ 3.456722] usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=2883 >[ 3.457652] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 >[ 3.458579] usb 1-1.3: Product: ASUS USB2.0 Webcam >[ 3.459510] usb 1-1.3: Manufacturer: 04G626000611BQ3420004ZP >[ 3.772770] sd 0:0:0:0: Attached scsi generic sg0 type 0 >[ 3.773936] sr 2:0:0:0: Attached scsi generic sg1 type 5 >[ 3.819427] scsi: <fdomain> Detection failed (no card) >[ 3.911475] GDT-HA: Storage RAID Controller Driver. Version: 3.05 >[ 3.973842] imm: Version 2.05 (for Linux 2.4.0) >[ 4.106114] Fusion MPT base driver 3.04.20 >[ 4.107256] Copyright (c) 1999-2008 LSI Corporation >[ 4.112040] Fusion MPT SPI Host driver 3.04.20 >[ 4.115309] Fusion MPT FC Host driver 3.04.20 >[ 4.118641] Fusion MPT SAS Host driver 3.04.20 >[ 4.121257] 3ware Storage Controller device driver for Linux v1.26.02.003. >[ 4.123915] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. >[ 4.130804] HP CISS Driver (v 3.6.26) >[ 4.140987] Adaptec aacraid driver 1.2-0[30300]-ms >[ 4.145273] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) >[ 4.146663] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) >[ 4.150619] megasas: 06.805.06.01-rc1 >[ 4.154504] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k. >[ 4.165476] Emulex LightPulse Fibre Channel SCSI driver 10.4.8000.0. >[ 4.166634] Copyright(c) 2004-2014 Emulex. All rights reserved. >[ 4.172035] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded >[ 4.197580] usbcore: registered new interface driver usb-storage >[ 4.200666] uhci_hcd: USB Universal Host Controller Interface driver >[ 4.203956] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >[ 4.205327] ohci-pci: OHCI PCI platform driver >[ 4.215934] usbcore: registered new interface driver usbhid >[ 4.217171] usbhid: USB HID core driver >[ 4.308662] device-mapper: uevent: version 1.0.3 >[ 4.309997] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com >[ 4.334463] md: raid0 personality registered for level 0 >[ 4.337506] md: raid1 personality registered for level 1 >[ 4.510406] raid6: sse2x1 6392 MB/s >[ 4.680545] raid6: sse2x2 8032 MB/s >[ 4.850693] raid6: sse2x4 9347 MB/s >[ 4.851978] raid6: using algorithm sse2x4 (9347 MB/s) >[ 4.853265] raid6: using ssse3x2 recovery algorithm >[ 4.854709] async_tx: api initialized (async) >[ 4.856073] xor: automatically using best checksumming function: >[ 4.950774] avx : 17886.800 MB/sec >[ 4.952880] md: raid6 personality registered for level 6 >[ 4.954062] md: raid5 personality registered for level 5 >[ 4.955198] md: raid4 personality registered for level 4 >[ 4.968163] md: raid10 personality registered for level 10 >[ 4.971077] md: linear personality registered for level -1 >[ 4.974230] md: multipath personality registered for level -4 >[ 5.001527] JFS: nTxBlock = 8192, nTxLock = 65536 >[ 5.009345] RPC: Registered named UNIX socket transport module. >[ 5.010415] RPC: Registered udp transport module. >[ 5.011492] RPC: Registered tcp transport module. >[ 5.012531] RPC: Registered tcp NFSv4.1 backchannel transport module. >[ 5.027521] fuse init (API version 7.23) >[ 5.032919] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI >[ 5.034006] e1000: Copyright (c) 1999-2006 Intel Corporation. >[ 5.038093] pps_core: LinuxPPS API ver. 1 registered >[ 5.039174] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> >[ 5.040449] PTP clock support registered >[ 5.046557] Loading iSCSI transport class v2.0-870. >[ 5.115027] PM: Starting manual resume from disk >[ 5.233015] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) >[ 6.940358] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL -XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN ) >[ 6.942527] systemd[1]: Detected architecture 'x86-64'. >[ 7.072028] NET: Registered protocol family 10 >[ 7.073211] systemd[1]: Inserted module 'ipv6' >[ 7.090350] systemd[1]: Set hostname to <7N1N3AC>. >[ 7.764640] random: nonblocking pool is initialized >[ 9.672993] systemd[1]: Found device ST1000LM024_HN-M101MBB 6. >[ 9.673918] systemd[1]: Found device ST1000LM024_HN-M101MBB 6. >[ 9.674828] systemd[1]: Found device ST1000LM024_HN-M101MBB 6. >[ 9.675711] systemd[1]: Found device ST1000LM024_HN-M101MBB 6. >[ 9.676604] systemd[1]: Mounted /. >[ 9.677817] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. >[ 9.678753] systemd[1]: Started Forward Password Requests to Wall Directory Watch. >[ 9.679662] systemd[1]: Starting Login Prompts. >[ 9.681495] systemd[1]: Reached target Login Prompts. >[ 9.682380] systemd[1]: Starting Remote File Systems. >[ 9.684171] systemd[1]: Reached target Remote File Systems. >[ 9.685063] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. >[ 9.686984] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. >[ 9.687933] systemd[1]: Starting Root Slice. >[ 9.691573] systemd[1]: Created slice Root Slice. >[ 9.692493] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. >[ 9.694384] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. >[ 9.695303] systemd[1]: Starting Delayed Shutdown Socket. >[ 9.697152] systemd[1]: Listening on Delayed Shutdown Socket. >[ 9.698050] systemd[1]: Starting Journal Socket (/dev/log). >[ 9.699873] systemd[1]: Listening on Journal Socket (/dev/log). >[ 9.700746] systemd[1]: Starting User and Session Slice. >[ 9.702602] systemd[1]: Created slice User and Session Slice. >[ 9.703492] systemd[1]: Starting udev Kernel Socket. >[ 9.705322] systemd[1]: Listening on udev Kernel Socket. >[ 9.706222] systemd[1]: Starting udev Control Socket. >[ 9.708068] systemd[1]: Listening on udev Control Socket. >[ 9.708955] systemd[1]: Starting Journal Socket. >[ 9.710685] systemd[1]: Listening on Journal Socket. >[ 9.711508] systemd[1]: Starting System Slice. >[ 9.713230] systemd[1]: Created slice System Slice. >[ 9.749857] systemd[1]: Starting Load Kernel Modules... >[ 9.751783] systemd[1]: Mounting POSIX Message Queue File System... >[ 9.753770] systemd[1]: Starting Create list of required static device nodes for the current kernel... >[ 9.821760] systemd[1]: Started Set Up Additional Binary Formats. >[ 9.822738] systemd[1]: Mounting Debug File System... >[ 9.824847] systemd[1]: Mounted Huge Pages File System. >[ 9.825799] systemd[1]: Starting system-getty.slice. >[ 9.827749] systemd[1]: Created slice system-getty.slice. >[ 9.828672] systemd[1]: Starting Setup Virtual Console... >[ 9.830748] systemd[1]: Starting udev Coldplug all Devices... >[ 9.832854] systemd[1]: Starting File System Check on Root Device... >[ 10.070160] systemd[1]: Mounting Temporary Directory... >[ 10.084965] systemd[1]: Starting Journal Service... >[ 10.087910] systemd[1]: Started Journal Service. >[ 10.248455] vboxdrv: Found 8 processor cores. >[ 10.249337] vboxdrv: fAsync=0 offMin=0x1d0 offMax=0x110bc >[ 10.250245] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. >[ 10.251098] vboxdrv: Successfully loaded version 4.3.18 (interface 0x001a0008). >[ 10.915017] Adding 17406972k swap on /dev/sda6. Priority:-1 extents:1 across:17406972k >[ 11.693794] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro >[ 12.287249] systemd-udevd[2427]: starting version 216 >[ 12.381909] systemd-journald[2387]: Received request to flush runtime journal from PID 1 >[ 17.150967] ACPI: AC Adapter [AC0] (on-line) >[ 17.151505] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9 >[ 17.187991] xhci_hcd 0000:00:14.0: xHCI Host Controller >[ 17.188939] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 >[ 17.189980] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported >[ 17.190115] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 >[ 17.191081] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 17.192053] usb usb3: Product: xHCI Host Controller >[ 17.193029] usb usb3: Manufacturer: Linux 3.19.3-gentoo xhci-hcd >[ 17.193982] usb usb3: SerialNumber: 0000:00:14.0 >[ 17.195083] hub 3-0:1.0: USB hub found >[ 17.196033] hub 3-0:1.0: 4 ports detected >[ 17.197097] xhci_hcd 0000:00:14.0: xHCI Host Controller >[ 17.198029] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 >[ 17.199024] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 >[ 17.199966] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 17.200913] usb usb4: Product: xHCI Host Controller >[ 17.201297] ACPI: Lid Switch [LID] >[ 17.201353] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10 >[ 17.201388] ACPI: Sleep Button [SLPB] >[ 17.201446] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11 >[ 17.201485] ACPI: Power Button [PWRF] >[ 17.207593] usb usb4: Manufacturer: Linux 3.19.3-gentoo xhci-hcd >[ 17.208760] usb usb4: SerialNumber: 0000:00:14.0 >[ 17.210212] hub 4-0:1.0: USB hub found >[ 17.211385] hub 4-0:1.0: 4 ports detected >[ 17.213058] wmi: Mapper loaded >[ 17.364240] thermal LNXTHERM:00: registered as thermal_zone0 >[ 17.365190] ACPI: Thermal Zone [THRM] (70 C) >[ 17.572153] ACPI: Battery Slot [BAT0] (battery present) >[ 17.635349] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\SMB0) (20141107/utaddress-258) >[ 17.637400] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20141107/utaddress-258) >[ 17.639569] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver >[ 18.109336] EFI Variables Facility v0.08 2004-May-17 >[ 18.443921] input: PC Speaker as /devices/platform/pcspkr/input/input12 >[ 18.542804] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15 >[ 18.664718] [drm] Initialized drm 1.1.0 20060810 >[ 19.401396] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded >[ 19.402255] r8169 0000:04:00.2: can't disable ASPM; OS doesn't have ASPM control >[ 19.403845] r8169 0000:04:00.2 eth0: RTL8411 at 0xffffc90005c60000, 60:a4:4c:73:2e:ac, XID 08800800 IRQ 27 >[ 19.404634] r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] >[ 19.422156] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15 >[ 19.423000] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15 >[ 19.423876] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15 >[ 19.424679] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15 >[ 19.425836] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15 >[ 19.426648] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15 >[ 19.427438] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15 >[ 19.428246] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba >[ 19.723535] r8169 0000:04:00.2 enp4s0f2: renamed from eth0 >[ 19.773546] systemd-udevd[2454]: renamed network interface eth0 to enp4s0f2 >[ 19.773612] cfg80211: Calling CRDA to update world regulatory domain >[ 20.072521] [drm] Memory usable by graphics device = 2048M >[ 20.073276] checking generic (d0000000 300000) vs hw (d0000000 10000000) >[ 20.073277] fb: switching to inteldrmfb from EFI VGA >[ 20.074046] Console: switching to colour dummy device 80x25 >[ 20.074111] [drm] Replacing VGA console driver >[ 20.143754] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). >[ 20.143757] [drm] Driver supports precise vblank timestamp query. >[ 20.143868] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem >[ 20.174229] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) >[ 20.174516] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input13 >[ 20.175061] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) >[ 20.177268] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14 >[ 20.177330] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0 >[ 20.195159] fbcon: inteldrmfb (fb0) is primary device >[ 20.427052] sound hdaudioC0D0: autoconfig: line_outs=2 (0x14/0x16/0x0/0x0/0x0) type:speaker >[ 20.427053] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) >[ 20.427054] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) >[ 20.427055] sound hdaudioC0D0: mono: mono_out=0x0 >[ 20.427056] sound hdaudioC0D0: dig-out=0x1e/0x0 >[ 20.427056] sound hdaudioC0D0: inputs: >[ 20.427057] sound hdaudioC0D0: Internal Mic=0x19 >[ 20.427058] sound hdaudioC0D0: Mic=0x18 >[ 20.431093] sound hdaudioC0D3: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line >[ 20.431094] sound hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) >[ 20.431095] sound hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) >[ 20.431095] sound hdaudioC0D3: mono: mono_out=0x0 >[ 20.431096] sound hdaudioC0D3: dig-out=0x6/0x0 >[ 20.431097] sound hdaudioC0D3: inputs: >[ 20.513283] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A >[ 20.513334] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun >[ 20.914944] Console: switching to colour frame buffer device 170x48 >[ 20.917632] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device >[ 20.917633] i915 0000:00:02.0: registered panic notifier >[ 21.542097] ath: phy0: Disable PLL PowerSave >[ 21.549862] ath: EEPROM regdomain: 0x60 >[ 21.549863] ath: EEPROM indicates we should expect a direct regpair map >[ 21.549865] ath: Country alpha2 being used: 00 >[ 21.549866] ath: Regpair used: 0x60 >[ 21.605247] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' >[ 21.605453] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90004a80000, irq=17 >[ 21.607910] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0 >[ 21.645148] systemd-udevd[2451]: renamed network interface wlan0 to wlp3s0 >[ 22.887033] cfg80211: World regulatory domain updated: >[ 22.887782] cfg80211: DFS Master region: unset >[ 22.887793] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) >[ 22.889230] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 22.889986] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 22.890726] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) >[ 22.891449] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) >[ 22.892180] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) >[ 22.892896] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) >[ 22.893606] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) >[ 22.894317] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) >[ 32.408423] ip_tables: (C) 2000-2006 Netfilter Core Team >[ 35.586919] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) >[ 35.900145] r8169 0000:04:00.2 enp4s0f2: link down >[ 38.270596] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready >[ 38.283200] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready >[ 53.274997] r8169 0000:04:00.2 enp4s0f2: link down >[ 54.351753] wlp3s0: authenticate with 14:cc:20:78:6c:7d >[ 54.366390] wlp3s0: send auth to 14:cc:20:78:6c:7d (try 1/3) >[ 54.368831] wlp3s0: authenticated >[ 54.372930] wlp3s0: associate with 14:cc:20:78:6c:7d (try 1/3) >[ 54.377145] wlp3s0: RX AssocResp from 14:cc:20:78:6c:7d (capab=0x431 status=0 aid=1) >[ 54.377261] wlp3s0: associated >[ 54.377306] cfg80211: Calling CRDA for country: CL >[ 54.378780] ath: EEPROM regdomain: 0x8098 >[ 54.378781] ath: EEPROM indicates we should expect a country code >[ 54.378782] ath: doing EEPROM country->regdmn map search >[ 54.378782] ath: country maps to regdmn code: 0x5b >[ 54.378783] ath: Country alpha2 being used: CL >[ 54.378784] ath: Regpair used: 0x5b >[ 54.378785] ath: regdomain 0x8098 dynamically updated by country IE >[ 54.378804] cfg80211: Regulatory domain changed to country: CL >[ 54.378805] cfg80211: DFS Master region: unset >[ 54.378806] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) >[ 54.378808] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 54.378809] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) >[ 54.378810] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) >[ 54.378811] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) >[ 102.150845] bbswitch: version 0.8 >[ 102.150860] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 >[ 102.150864] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP >[ 102.150872] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 102.150949] bbswitch: detected an Optimus _DSM function >[ 102.150998] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on >[ 102.152260] bbswitch: disabling discrete graphics >[ 102.152266] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 103.857807] Bluetooth: Core ver 2.20 >[ 103.857822] NET: Registered protocol family 31 >[ 103.857823] Bluetooth: HCI device and connection manager initialized >[ 103.857826] Bluetooth: HCI socket layer initialized >[ 103.857828] Bluetooth: L2CAP socket layer initialized >[ 103.857833] Bluetooth: SCO socket layer initialized >[ 104.073036] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 >[ 104.073040] Bluetooth: BNEP filters: protocol multicast >[ 104.073043] Bluetooth: BNEP socket layer initialized >[ 318.371476] bbswitch: enabling discrete graphics >[ 319.153268] nvidia: module license 'NVIDIA' taints kernel. >[ 319.153273] Disabling lock debugging due to kernel taint >[ 319.161089] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none >[ 319.161473] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1 >[ 319.161478] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.47 Thu Feb 19 18:56:03 PST 2015 >[ 319.244637] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 319.244679] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 319.244722] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 319.244742] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 319.244760] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 319.244779] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 319.244821] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 319.244839] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 319.268202] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 320.926010] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 320.926053] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 320.926098] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 320.926118] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 320.926137] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 320.926155] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 320.926197] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 320.926216] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 320.942440] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 323.684120] [drm] Module unloaded >[ 323.723762] bbswitch: disabling discrete graphics >[ 323.723770] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) >[ 323.743089] pci 0000:01:00.0: Refused to change power state, currently in D0 >[ 606.913391] usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd >[ 606.936425] usb 4-4: New USB device found, idVendor=0bc2, idProduct=2312 >[ 606.936433] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >[ 606.936436] usb 4-4: Product: Expansion >[ 606.936438] usb 4-4: Manufacturer: Seagate >[ 606.936440] usb 4-4: SerialNumber: NA4AN9GQ >[ 606.936832] usb-storage 4-4:1.0: USB Mass Storage device detected >[ 606.936997] scsi host6: usb-storage 4-4:1.0 >[ 607.934942] scsi 6:0:0:0: Direct-Access Seagate Expansion 0637 PQ: 0 ANSI: 6 >[ 607.935321] sd 6:0:0:0: Attached scsi generic sg2 type 0 >[ 607.936152] sd 6:0:0:0: [sdb] Spinning up disk... >[ 611.647181] .ready >[ 611.647647] sd 6:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.81 TiB) >[ 611.648343] sd 6:0:0:0: [sdb] Write Protect is off >[ 611.648346] sd 6:0:0:0: [sdb] Mode Sense: 2b 00 10 08 >[ 611.649030] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA >[ 611.683898] sdb: sdb1 >[ 611.685376] sd 6:0:0:0: [sdb] Attached SCSI disk >[ 612.578305] EXT4-fs (sdb1): recovery complete >[ 612.578461] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) >[ 730.971513] wlp3s0: authenticate with 7c:b7:33:f1:ac:7a >[ 730.986229] wlp3s0: send auth to 7c:b7:33:f1:ac:7a (try 1/3) >[ 730.986247] cfg80211: Calling CRDA to update world regulatory domain >[ 730.988052] cfg80211: World regulatory domain updated: >[ 730.988054] cfg80211: DFS Master region: unset >[ 730.988055] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) >[ 730.988057] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 730.988058] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 730.988059] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) >[ 730.988060] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) >[ 730.988061] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) >[ 730.988062] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) >[ 730.988063] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) >[ 730.988064] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) >[ 730.988915] wlp3s0: authenticated >[ 730.996153] wlp3s0: associate with 7c:b7:33:f1:ac:7a (try 1/3) >[ 731.006015] wlp3s0: RX AssocResp from 7c:b7:33:f1:ac:7a (capab=0x411 status=0 aid=5) >[ 731.006156] wlp3s0: associated >[ 805.374700] traps: gom-flickr-mine[5580] trap int3 ip:7fb6f3e59563 sp:7ffe57d1a240 error:0 >[ 2172.509251] wlp3s0: authenticate with 14:cc:20:83:fe:5c >[ 2172.524063] wlp3s0: send auth to 14:cc:20:83:fe:5c (try 1/3) >[ 2172.525641] cfg80211: Calling CRDA to update world regulatory domain >[ 2172.526468] wlp3s0: authenticated >[ 2172.528283] cfg80211: World regulatory domain updated: >[ 2172.528286] cfg80211: DFS Master region: unset >[ 2172.528286] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) >[ 2172.528288] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 2172.528289] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 2172.528290] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) >[ 2172.528292] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) >[ 2172.528293] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) >[ 2172.528294] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) >[ 2172.528295] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) >[ 2172.528296] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) >[ 2172.534093] wlp3s0: associate with 14:cc:20:83:fe:5c (try 1/3) >[ 2172.538297] wlp3s0: RX AssocResp from 14:cc:20:83:fe:5c (capab=0x431 status=0 aid=2) >[ 2172.538420] wlp3s0: associated >[ 2172.538466] cfg80211: Calling CRDA for country: CL >[ 2172.539748] ath: EEPROM regdomain: 0x8098 >[ 2172.539749] ath: EEPROM indicates we should expect a country code >[ 2172.539750] ath: doing EEPROM country->regdmn map search >[ 2172.539751] ath: country maps to regdmn code: 0x5b >[ 2172.539751] ath: Country alpha2 being used: CL >[ 2172.539752] ath: Regpair used: 0x5b >[ 2172.539753] ath: regdomain 0x8098 dynamically updated by country IE >[ 2172.539771] cfg80211: Regulatory domain changed to country: CL >[ 2172.539772] cfg80211: DFS Master region: unset >[ 2172.539773] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) >[ 2172.539774] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 2172.539776] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) >[ 2172.539777] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) >[ 2172.539778] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) >[ 2292.300230] wlp3s0: authenticate with 7c:b7:33:f1:ac:7a >[ 2292.314889] wlp3s0: send auth to 7c:b7:33:f1:ac:7a (try 1/3) >[ 2292.314908] cfg80211: Calling CRDA to update world regulatory domain >[ 2292.316579] cfg80211: World regulatory domain updated: >[ 2292.316581] cfg80211: DFS Master region: unset >[ 2292.316582] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) >[ 2292.316584] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 2292.316585] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 2292.316586] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) >[ 2292.316587] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) >[ 2292.316588] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) >[ 2292.316590] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) >[ 2292.316590] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) >[ 2292.316592] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) >[ 2292.316759] wlp3s0: authenticated >[ 2292.325037] wlp3s0: associate with 7c:b7:33:f1:ac:7a (try 1/3) >[ 2292.334880] wlp3s0: RX AssocResp from 7c:b7:33:f1:ac:7a (capab=0x411 status=0 aid=5) >[ 2292.334985] wlp3s0: associated >[ 2773.036352] wlp3s0: authenticate with 14:cc:20:83:fe:5c >[ 2773.051040] wlp3s0: send auth to 14:cc:20:83:fe:5c (try 1/3) >[ 2773.051105] cfg80211: Calling CRDA to update world regulatory domain >[ 2773.053093] cfg80211: World regulatory domain updated: >[ 2773.053095] cfg80211: DFS Master region: unset >[ 2773.053096] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) >[ 2773.053097] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 2773.053099] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 2773.053099] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) >[ 2773.053101] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) >[ 2773.053102] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) >[ 2773.053103] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) >[ 2773.053104] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) >[ 2773.053105] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) >[ 2773.053512] wlp3s0: authenticated >[ 2773.061054] wlp3s0: associate with 14:cc:20:83:fe:5c (try 1/3) >[ 2773.065258] wlp3s0: RX AssocResp from 14:cc:20:83:fe:5c (capab=0x431 status=0 aid=2) >[ 2773.065385] wlp3s0: associated >[ 2773.065441] cfg80211: Calling CRDA for country: CL >[ 2773.066915] ath: EEPROM regdomain: 0x8098 >[ 2773.066916] ath: EEPROM indicates we should expect a country code >[ 2773.066917] ath: doing EEPROM country->regdmn map search >[ 2773.066917] ath: country maps to regdmn code: 0x5b >[ 2773.066918] ath: Country alpha2 being used: CL >[ 2773.066919] ath: Regpair used: 0x5b >[ 2773.066920] ath: regdomain 0x8098 dynamically updated by country IE >[ 2773.066938] cfg80211: Regulatory domain changed to country: CL >[ 2773.066939] cfg80211: DFS Master region: unset >[ 2773.066940] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) >[ 2773.066941] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 2773.066943] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) >[ 2773.066944] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) >[ 2773.066945] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) >[ 3853.611074] wlp3s0: authenticate with 7c:b7:33:f1:ac:7a >[ 3853.625782] wlp3s0: send auth to 7c:b7:33:f1:ac:7a (try 1/3) >[ 3853.625818] cfg80211: Calling CRDA to update world regulatory domain >[ 3853.627633] wlp3s0: authenticated >[ 3853.627660] cfg80211: World regulatory domain updated: >[ 3853.627662] cfg80211: DFS Master region: unset >[ 3853.627662] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) >[ 3853.627664] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 3853.627665] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 3853.627666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) >[ 3853.627668] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) >[ 3853.627669] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) >[ 3853.627670] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) >[ 3853.627671] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) >[ 3853.627672] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) >[ 3853.635681] wlp3s0: associate with 7c:b7:33:f1:ac:7a (try 1/3) >[ 3853.645532] wlp3s0: RX AssocResp from 7c:b7:33:f1:ac:7a (capab=0x411 status=0 aid=5) >[ 3853.645638] wlp3s0: associated >[ 4694.638032] wlp3s0: authenticate with 14:cc:20:83:fe:5c >[ 4694.652758] wlp3s0: send auth to 14:cc:20:83:fe:5c (try 1/3) >[ 4694.652798] cfg80211: Calling CRDA to update world regulatory domain >[ 4694.655100] cfg80211: World regulatory domain updated: >[ 4694.655103] cfg80211: DFS Master region: unset >[ 4694.655104] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) >[ 4694.655105] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 4694.655107] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 4694.655107] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) >[ 4694.655109] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) >[ 4694.655110] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) >[ 4694.655111] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) >[ 4694.655112] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) >[ 4694.655113] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) >[ 4694.655161] wlp3s0: authenticated >[ 4694.662683] wlp3s0: associate with 14:cc:20:83:fe:5c (try 1/3) >[ 4694.666939] wlp3s0: RX AssocResp from 14:cc:20:83:fe:5c (capab=0x431 status=0 aid=2) >[ 4694.667065] wlp3s0: associated >[ 4694.667123] cfg80211: Calling CRDA for country: CL >[ 4694.668587] ath: EEPROM regdomain: 0x8098 >[ 4694.668588] ath: EEPROM indicates we should expect a country code >[ 4694.668588] ath: doing EEPROM country->regdmn map search >[ 4694.668589] ath: country maps to regdmn code: 0x5b >[ 4694.668590] ath: Country alpha2 being used: CL >[ 4694.668590] ath: Regpair used: 0x5b >[ 4694.668591] ath: regdomain 0x8098 dynamically updated by country IE >[ 4694.668610] cfg80211: Regulatory domain changed to country: CL >[ 4694.668610] cfg80211: DFS Master region: unset >[ 4694.668611] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) >[ 4694.668613] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 4694.668614] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) >[ 4694.668615] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) >[ 4694.668616] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) >[ 5655.128033] wlp3s0: authenticate with 7c:b7:33:f1:ac:7a >[ 5655.142733] wlp3s0: send auth to 7c:b7:33:f1:ac:7a (try 1/3) >[ 5655.142805] cfg80211: Calling CRDA to update world regulatory domain >[ 5655.144600] wlp3s0: authenticated >[ 5655.144649] cfg80211: World regulatory domain updated: >[ 5655.144650] cfg80211: DFS Master region: unset >[ 5655.144651] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) >[ 5655.144652] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 5655.144653] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) >[ 5655.144654] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) >[ 5655.144656] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) >[ 5655.144657] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) >[ 5655.144658] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) >[ 5655.144659] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) >[ 5655.144660] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) >[ 5655.152682] wlp3s0: associate with 7c:b7:33:f1:ac:7a (try 1/3) >[ 5655.162487] wlp3s0: RX AssocResp from 7c:b7:33:f1:ac:7a (capab=0x411 status=0 aid=5) >[ 5655.162599] wlp3s0: associated >[ 8729.400224] traps: gom-flickr-mine[13191] trap int3 ip:7f3fa8852563 sp:7ffc0644f8e0 error:0 >[ 8729.609272] traps: gom-flickr-mine[13214] trap int3 ip:7f2a38b9a563 sp:7ffe70519540 error:0 >[ 8730.357873] traps: gom-flickr-mine[13225] trap int3 ip:7f4d54605563 sp:7ffee7250d70 error:0 >[10317.398468] usb 4-4: USB disconnect, device number 2 >[10317.399160] sd 6:0:0:0: [sdb] Synchronizing SCSI cache >[10317.399193] sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00 >[13125.388492] pci 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update
<b>You cannot view the attachment while viewing its details because your browser does not support IFRAMEs. <a href="attachment.cgi?id=401020">View the attachment on a separate page</a>.</b>
View Attachment As Raw
Actions:
View
Attachments on
bug 546230
: 401020
