Linux version 2.6.8-gentoo-r4 (root@livecd) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #1 SMP Sun Sep 19 13:01:39 PDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) BIOS-e820: 000000003fef0000 - 000000003feff000 (ACPI data) BIOS-e820: 000000003feff000 - 000000003ff00000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 000000003ff80000 (usable) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec04000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f7170 On node 0 totalpages: 262016 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32640 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v000 PTLTD ) @ 0x000f7100 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x3fefcf28 ACPI: FADT (v001 AMD TECATE 0x06040000 PTL 0x000f4240) @ 0x3fefef2e ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x3fefefa2 ACPI: DSDT (v001 AMD AMDACPI 0x06040000 MSFT 0x0100000d) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x01] enabled) Processor #1 6:6 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:6 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: root=/dev/hda4 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1667.282 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1034904k/1048064k available (1811k kernel code, 12196k reserved, 785k data, 168k init, 130496k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3268.60 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. init init/main.c:657 init init/main.c:670 CPU0: AMD Athlon(tm) MP 2000+ stepping 02 per-CPU timeslice cutoff: 731.46 usecs. task migration cache decay timeout: 1 msecs. masked ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3325.95 BogoMIPS CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) Processor stepping 02 Total of 2 processors activated (6594.56 BogoMIPS). ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1666.0423 MHz. ..... host bus clock speed is 266.0627 MHz. checking TSC synchronization across 2 CPUs: passed. init init/main.c:675 do_pre_smp_initcalls init/main.c:621 do_pre_smp_initcalls init/main.c:627 init init/main.c:679 init init/main.c:682 Brought up 2 CPUs init init/main.c:684 CPU0: online domain 0: span 3 groups: 1 2 CPU1: online domain 0: span 3 groups: 2 1 init init/main.c:686 init init/main.c:692 do_basic_setup init/main.c:602 do_basic_setup init/main.c:604 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd7d0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Subsystem revision 20040326 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.OP2P._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 11) *9 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 *10 11) PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 20 (level, low) -> IRQ 20 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 21 (level, low) -> IRQ 21 ACPI: PCI interrupt 0000:00:09.1[B] -> GSI 22 (level, low) -> IRQ 22 ACPI: PCI interrupt 0000:00:09.2[C] -> GSI 23 (level, low) -> IRQ 23 ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI interrupt 0000:02:00.0[D] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI interrupt 0000:02:04.2[B] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 19 (level, low) -> IRQ 19 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 0 1 0 1 0 1 1 71 0a 003 03 0 0 0 0 0 1 1 79 0b 003 03 0 0 0 0 0 1 1 81 0c 003 03 0 0 0 0 0 1 1 89 0d 003 03 0 0 0 0 0 1 1 91 0e 003 03 0 0 0 0 0 1 1 99 0f 003 03 0 0 0 0 0 1 1 A1 10 003 03 1 1 0 1 0 1 1 D9 11 003 03 1 1 0 1 0 1 1 E1 12 003 03 1 1 0 1 0 1 1 C9 13 003 03 1 1 0 1 0 1 1 D1 14 003 03 1 1 0 1 0 1 1 A9 15 003 03 1 1 0 1 0 1 1 B1 16 003 03 1 1 0 1 0 1 1 B9 17 003 03 1 1 0 1 0 1 1 C1 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. vesafb: ATI Technologies Inc., V350, 01.00 (OEM: ATI RADEON 9600 PRO) vesafb: VBE version: 2.0 vesafb: protected mode interface info at c000:57af vesafb: pmi: set display start = c00c5843, set palette = c00c588f vesafb: pmi: ports = 2010 2016 2054 2038 203c 205c 2000 2004 20b0 20b2 20b4 vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz vesafb: scrolling: redraw vesafb: framebuffer at 0xd0000000, mapped to 0xf8808000, size 16384k fb0: VESA VGA frame buffer device Machine check exception polling timer started. Starting balanced_irq audit: initializing netlink socket (disabled) audit(1095629267.959:0): initialized highmem bounce pool size: 64 pages devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 udf: registering filesystem Initializing Cryptographic API BIOS failed to enable PCI standards compliance, fixing this error. ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 Console: switching to colour frame buffer device 160x64 Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7441: IDE controller at PCI slot 0000:00:07.1 AMD7441: chipset revision 4 AMD7441: not 100% native mode: will probe irqs later AMD7441: 0000:00:07.1 (rev 04) UDMA100 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD1200BB-00CAA1, ATA DISK drive hdb: MAXTOR 4K040H2, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: LITE-ON LTR-48125W, ATAPI CD/DVD-ROM drive hdd: COMPAQ DVD-ROM SD-612B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 hdb: max request size: 128KiB hdb: 78198750 sectors (40037 MB) w/2000KiB Cache, CHS=65535/16/63, UDMA(100) /dev/ide/host0/bus0/target1/lun0: p1 p2 hdc: ATAPI 48X CD-ROM CD-R/RW drive, 1984kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 32X DVD-ROM drive, 512kB Cache, UDMA(33) NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) ip_conntrack version 2.1 (8188 buckets, 65504 max) - 300 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) init init/main.c:694 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 168k freed EXT3 FS on hda4, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected AMD 760MP chipset agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 64M @ 0xc4000000 natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002 originally by Donald Becker http://www.scyld.com/network/natsemi.html 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 20 (level, low) -> IRQ 20 natsemi eth0: NatSemi DP8381[56] at 0xf988c000 (0000:00:08.0), 00:09:5b:61:37:a1, IRQ 20, port TP. eth0: DSPCFG accepted after 0 usec. ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 19 (level, low) -> IRQ 19 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:08.0: 3Com PCI 3c905C Tornado at 0x3000. Vers LK1.1.19 eth0: remaining active for wake-on-lan inserting floppy driver for 2.6.8-gentoo-r4 acpi_floppy_resource: 6 ioports at 0x3f0 acpi_floppy_resource: 1 ioports at 0x3f7 floppy: controller ACPI FDC0 at I/O 0x3f0-0x3f5, 0x3f7-0x3f7 irq 6 dma channel 2 inserting floppy driver for 2.6.8-gentoo-r4 kjournald starting. Commit interval 5 seconds EXT3-fs warning: checktime reached, running e2fsck is recommended EXT3 FS on hdb2, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x1000000 mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x1000000 mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x1000000 mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x1000000 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 1. Bank 1: d400400000000853 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 1. Bank 2: d400400000000813 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 1: d400400000000853 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 2: d400400000000813 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 1. Bank 1: d400400000000853 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 1. Bank 2: d400400000000813 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 1: d400400000000853 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 2: d400400000000813 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 1. Bank 1: d400400000000853 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 1. Bank 2: d400400000000813 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 1: d400400000000853 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 2: d400400000000813 eth1: Setting half-duplex based on MII #24 link partner capability of 0000. eth1: Setting full-duplex based on MII #24 link partner capability of 05e1.