[ 0.000000] Linux version 3.18.5-gentoo (root@hostname) (gcc version 4.8.3 (Gentoo 4.8.3 p1.1, pie-0.5.9) ) #1 Fri Jan 30 21:46:38 CET 2015 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d9fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002ffeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000002fff0000-0x000000002fff7fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000002fff8000-0x000000002fffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.3 present. [ 0.000000] e820: last_pfn = 0x2fff0 max_arch_pfn = 0x100000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000fba20-0x000fba2f] mapped at [c00fba20] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x2f800000-0x2fbfffff] [ 0.000000] init_memory_mapping: [mem 0x28000000-0x2f7fffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0x27ffffff] [ 0.000000] init_memory_mapping: [mem 0x2fc00000-0x2ffeffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000FA160 000014 (v00 AMI ) [ 0.000000] ACPI: RSDT 0x2FFF0000 00002C (v01 AMIINT INTEL845 00000010 MSFT 00000097) [ 0.000000] ACPI: FACP 0x2FFF0030 000081 (v01 AMIINT INTEL845 00000011 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x2FFF0120 00372F (v01 INTEL BROKDLEG 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 0x2FFF8000 000040 [ 0.000000] ACPI: APIC 0x2FFF00C0 00005C (v01 AMIINT INTEL845 00000009 MSFT 00000097) [ 0.000000] 767MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2fff0000 [ 0.000000] low ram: 0 - 2fff0000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x2ffeffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x2ffeffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x2ffeffff] [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] e820: [mem 0x30000000-0xfebfffff] available for PCI devices [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194574 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.18.5-gentoo root=/dev/sda4 ro console=ttyS0,115200 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Memory: 770396K/785976K available (3865K kernel code, 385K rwdata, 1120K rodata, 392K init, 444K bss, 15580K reserved) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB) [ 0.000000] vmalloc : 0xf07f0000 - 0xfffa1000 ( 247 MB) [ 0.000000] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB) [ 0.000000] .init : 0xc1542000 - 0xc15a4000 ( 392 kB) [ 0.000000] .data : 0xc13c68e9 - 0xc0680 (1511 kB) [ 0.000000] .text : 0xc1000000 - 0xc13c68e9 (3866 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 0 [ 0.00000ole: colour VGA+ 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2405.671 MHz prcessor [ 0.010012] Crating delay loop (skipped), value calculated using timer frequency.. 4813.81 BogoMIPS (lpj=8018903) [ 0.016670] pid_max: default: 32768 minimum: 301 [ 0.020180] ACPI: Core revision 20140926 [ 0.199169] ACPI: All ACPI Tables successfully acquired [ 0.210019] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.213349] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.218978] mce: CPU supports 4 MCE banks [ 0.220028] CPU0: Thermal monitoring enabled (TM1) [ 0.223353] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128 [ 0.223353] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0 [ 0.226669] CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (fam: 0f, model: 02, stepping: 07) [ 0.234065] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.286676] ... version: 0 [ 0.290003] ... bit width: 40 [ 0.293336] ... generic registers: 18 [ 0.296669] ... value mask: 000000ffffffffff [ 0.300003] ... max period: 0000007fffffffff [ 0.303336] ... fixed-purpose events: 0 [ 0.306669] ... event mask: 000000000003ffff [ 0.314303] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.320081] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.323664] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.363333] devtmpfs: initialized [ 0.370367] atomic64_test: passed for i586+ platform with CX8 and with SSE [ 0.374560] NET: Registered protocol family 16 [ 0.382645] cpuidle: using governor ladder [ 0.383357] cpuidle: using governor menu [ 0.387224] ACPI: bus type PCI registered [ 0.393687] PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2 [ 0.396668] PCI: Using configuration type 1 for base access [ 0.455363] Running resizable hashtable tests... [ 0.460047] Adding 2048 keys [ 0.491643] Traversal complete: counted=2048, nelems=2048, entries=2048 [ 0.493645] Table expansion iteration 0... [ 0.500486] Verifying lookups... [ 0.503636] Table expansion iteration 1... [ 0.507770] Verifying lookups... [ 0.510330] Table expansion iteration 2... [ 0.514971] Verifying lookups... [ 0.517124] Table expansion iteration 3... [ 0.523475] Verifying lookups... [ 0.527344] Table shrinkage iteration 0... [ 0.530960] Verifying lookups... [ 0.536711] Table shrinkage iteration 1... [ 0.540516] Verifying lookups... [ 0.543740] Table shrinkage iteration 2... [ 0.546850] Verifying lookups... [ 0.553534] e shrinkage iteration 3..[ 0.556805] Verifying lookups... [ 0.560357] Deleting 2048 keys [ 0.584532] ACPI: Added _OSI(le Device) [ 0.586694] ACPI: Added _OSI(Processor Device) [ 0.590002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.593336] ACPI: Added _essor Aggregator Device) [ 0.765629] ACPI: Interpreter enabled [ 0.766747] ACPI: (supports S0 S5) [ 0.770004] ACPI: Using IOAPIC for interrupt routing [ 0.774264] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.846398] ACPI: Power Resource [URP1] (off) [ 0.894127] ACPI: Power Resource [URP2] (off) [ 0.898072] ACPI: Power Resource [FDDP] (off) [ 0.901397] ACPI: Power Resource [LPTP] (off) [ 0.978505] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.980075] acpi PNP0A03:00: _OSC: OS supports [Segments MSI] [ 0.983566] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.992261] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.994493] PCI host bridge to bus 0000:00 [ 0.996689] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.000023] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.003356] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 1.026699] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 1.026699] * this clock source is slow. If you are sure your timer does not have [ 1.026699] * this bug, please use "acpi_pm_good" to disable the workaround [ 1.030185] pci 0000:00:1f.0: can't claim BAR 7 [io 0x0800-0x087f]: address conflict with ACI CPU throttle [io 0x081x0815] [ 1.033340] pci 0000:00:1f.0: quirk: [io 0x0400-0x043f] claimed by ICH4 GPIO [ 1.039326] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.040004] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.043336] pci 0000:00:1f.1: legacy IDE quirk: 0x18: [io 0x0170-0x0177] [ 1.046669] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.061425] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.071106] pci 0000:00:1e.0: PCI brige to [bus 02] (subtractive decode) [ 1.106102] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 1.113072] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 1.120070] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 1.132165] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.139137] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.146093] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.154180] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.167453] ACPI: PCI Interrupt Link [LNKH] (RQs 3 4 5 6 7 10 *11 12 14 15) [ 1.238802] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 1.239999] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.240008] vgaarb: loaded [ 1.243336] vgaarb: bridge control possible 0000:01:00.0 [ 1.251326] SCSI subsystem initialized [ 1.254141] ACPI: bus type USB registered [ 1.260857] usbcore: registered new interface driver usbfs [ 1.266803] usbcore: registered new interface driver hub [ 1.270314] usbcore: registered new device driver usb [ 1.274399] pps_core: LinuxPPS API ver. 1 registered [ 1.276700] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.280617] wmi: Mapper loaded [ 1.283478] PCI: Using ACPI for IRQ routing [ 1.291806] Switched to clocksource refined-jiffies [ 1.337278] pnp: PnP ACPI init [ 1.343471] system 00:00: [io 0x0290-0x0297] has been reserved [ 1.346708] system 00:00: [io 0x03f0-0x03f1] has been reserved [ 1.350043] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 1.353405] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.404168] pnp: PnP ACPI: found 7 devices [ 1.443270] Switched to clockcpi_pm [ 1.444244] pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment [ 1.451326] pci 0000:00:1f.1: BAR 5: assigned [mem 0x30000000-0x300003ff] [ 1.458136] pci 0000:00:01.0: PCI bridgeus 01] [ 1.463111] pci 0000:00:01.0: bridge window [mem 0xddd00000-0xdfdfffff] [ 1.469911] pci 0000:00:01.0: bridge window [mem 0xcda00000-0xddafffff pref] [ 1.477140] pci 0000:00:1e.0: PCI bridge to [bus 02] [ 1.482118] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 1.488221] pci 0000:00:1e.0: bridge window [mem 0xdfe00000-0xdfefffff] [ 1.495548] NET: Registered protocol family 2 [ 1.508483] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.515613] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 1.522104] TCP: Hash tables configured (established 8192 bind 8192) [ 1.528748] TCP: reno registered [ 1.532003] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 1.537867] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 1.544878] NET: Registered protocol family 1 [ 1.563496] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 1.573866] Scanning for low memory corruption every 60 seconds [ 1.584459] futex hash table entries: 256 (order: -1072 bytes) [ 1.897805] msgmni has been set to 1504 [ 1.907412] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.914839] io scheduler noop registered (default) [ 1.933879] test_string_helpers: Running tests... [ 1.946826] rbtree testing -> 23282 cycles [ 2.982902] augmented rbtree testing -> 38098 cycles [ 4.658041] sched: RT throttling activated [ 4.658053] tsc: Refined TSC clocksource calibration: 2405.454 MHz [ 4.681800] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.709116] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.738950] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.752389] Linux agpgart interface v0.103 [ 4.759265] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 4.767645] ACPI: Power Button [PWRB] [ 4.773085] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 4.780507] ACPI: Power Button [PWRF] [ 4.787723] [drm] Initialized drm 1.1.0 20060810 [ 4.800575] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x034200a2 [ 4.806687] nouveau [ E][0000:01:00.0] Chipset: NV34 (NV34) [ 4.812872] nouveau [ DEVICE][0000:01:00.0] Family : NV30 [ 4.818613] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 4.870146] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 4.876596] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN [ 4.883043] nouveau [ VBIOS][0000:01:00.0] BMP version 5.28 [ 4.889006] nouveau [ VBIOS][0000:01:00.0] version 04.34.20.42.00 [ 4.898665] nouveau W[ PTIMER][0000:01:00.0] unknown input clock freq [ 4.905314] nouveau [ PFB][0000:01:00.0] RAM type: DDR1 [ 4.910980] nouveau [ PFB][0000:01:00.0] RAM size: 128 MiB [ 4.916906] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags [ 4.927257] nouveau [ CLK][0000:01:00.0] --: [ 4.934056] [TTM] Zone kernel: Available graphics memory: 385198 kiB [ 4.940503] [TTM] Initializing pool allocator [ 4.945495] nouveau [ DR: 127 MiB [ 4.949860] nouveau [ DRM] GART: 128 MiB [ 4.954231] nouveau [ DRM] BMP version 5.40 [ 4.958855] nouveau [ DRM] DCB version 2.2 [ 4.963398] nouveau [ DRM] DCB outp 00: 01000300 000088b8 [ 4.969236] nouveau [ DRM] DCB outp 01: 02010310 000088b8 [ 4.975077] nouveau [ DRM] DCB outp 02: 01010312 00000000 [ 918] nouveau [ DRM] outp 03: 02020321 00000333 [ 4.986866] nouveau [ DRM] Loading NV17 power sequencing microcode [ 4.995686] nouveau [ DRM] Saving VGA fonts [ 5.055492] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.062119] [drm] Driver supports precise vblank timestamp query. [ 5.068224] nouveau [ DRM] 0xDDD4: Parsing digital output script table [ 5.079381] nouveau [ DRM] MM: using M2MF for buffer copies [ 5.085588] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3) [ 5.181336] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo ee761c20 [ 5.190088] fbcon: nouveaufb (fb0) is primary device [ 5.218415] Console: switching to colour frame buffer device 160x64 [ 5.232737] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 5.239097] nouveau 0000:01:00.0: registered panic notifier [ 5.244702] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0 [ 5.278159] loop: module loaded [ 5.281396] lkdtm: No crash points registered, enable through debugfs [ 5.393657] scsi host0: ata_piix [ 5.407326] scsi host1: ata_piix [ 5.412489] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 5.419489] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 5.427118] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 5.433230] e100: Copyright(c) 1999-2006 Intel Corporation [ 5.471774] e100 0000:02:08.0 eth0: addr 0xdfefe000, irq 20, MAC addr 00:10:dc:ca:0a:a8 [ 5.480298] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 5.494685] 8139too 0000:02:03.0 eth1: RealTek RTL8139 at 0xf080ef00, 00:e0:4c:10:52:44, IRQ [ 5.503794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.510345] ehci-pci: EHCI PCI platform driver [ 5.517323] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 5.522705] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 5.530162] ehci-pci 0000:00:1d.7: debug port 1 [ 5.538986] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdffffc00 [ 5.553370] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.560265] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.567072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.574302] usb usb1: Product: EHCI Host Controller [ 5.579190] usb usb1: Manufacturer: Linux 3.18.5-gentoo ehci_hcd [ 5.585215] usb usb1: SerialNumber: 0000:00:1d.7 [ 5.594731] hub 1-0:1.0: USB hub found [ 5.599288] hub 1-0:1.0: 6 ports detected [ 5.603870] ata2.00: ATAPI: SAMSUNG CDRW/DVD SM-352F, T902, max UDMA/33 [ 5.615783] uhci_hcd: USB Universal Host Controller Interface driver [ 5.622594] ata2.01: HPA detected: current 320170943, native 320173056 [ 5.629154] ata2.01: ATA-7: Maxtor 6Y160L0, YAR41VW0, max UDMA/133 [ 5.635354] ata2.01: 320170943 sectors, multi 16: LBA48 [ 5.640780] ata1.00: ATA-7: SAMSUNG SP0411N, TW100-08, max UDMA/100 [ 5.647057] ata1.00: 78242976 sectors, multi 16: LBA48 [ 5.652687] ata2.00: configured for U3 [ 5.661993] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.667782] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.675545] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e400 [ 5.681312] ata2.01: configed for UDMA/100 [ 5.686899] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.693694] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.700934] usb usb2: Product: UHCI Host Controller [ 5.705825] usb usb2: Manufacturer: Linux 3.18.5-gentoo uhci_hcd [ 5.711838] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.717113] ata1.01: ATA-7: HDS728080PLAT20, PF2OA2AA, max UDMA/133 [ 5.723389] ata1.01: 66055248 sectors, multi 16: LBA48 [ 5.728799] Switched to clocksource tsc [ 5.737001] ata1.00: configured for UDMA/100 [ 5.741599] hub 2-0:1.0: USB hub found [ 5.745588] hub 2-0:1.0: 2 ports detected [ 5.755259] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.761020] ata1.01: configured for UDMA/100 [ 5.766137] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0411N 0-08 PQ: 0 ANSI: 5 [ 5.774281] uhci00:00:1d.1: new USB bus registered, assigned bus number 3 [ 5.786474] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800 [ 5.792642] sd 0:0:0:0: [sda] 78242976 512-byte logical block: (40.0 GB/37.3 GiB) [ 5.802540] scsi 0:0:1:0: Direct-Access ATA HDS728080PLAT20 A2AA PQ: 0 ANSI: 5 [ 5.812755] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.819564] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.826781] usb usb3: Product: UHCI Host Controller [ 5.831667] usb usb3: Manufacturer: Linux 3.18.5-gentoo uhci_hcd [ 5.837671] usb usb3: SerialNumber: 0000:00:1d.1 [ 5.842330]sd 0:0:0:0: [sda Write Protect is off [ 5.847559] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.863666] sd 0:0:1:0: [sdb] 66055248 512-byte logical blocks: (33.8 GB/31.4 GiB) [ 5.871720] scsi 1:0:0:0: CD-ROM SAMSUNG CDRW/DVD SM-352F T902 PQ: 0 ANSI: 5 [ 5.882869] sd 0:0:1:0: [sdb] Write Protect is off [ 5.894585] hub 3-0:1.0: USB hub foun[ 5.898646] sda: sda1 sda2 sda3 sda4 [ 5.902657] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.915482] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 5.923404] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.931839] hub 3-0:1.0: 2 ports detected [ 5.942226] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.965917] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 5.973458] sdb: sdb1 [ 5.979738] scsi 1:0:1:0: Direct-Access ATA Maxtor 6Y160L0 1VW0 PQ: 0 ANSI: 5 [ 5.989537] sd 0:0:1:0: [sdb] Attached SCSI disk [ 5.994415] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00 [ 6.004772] sd 1:0:1:0: [sdc] 320170943 512-byte logical blocks: (163 GB/152 GiB) [ 6.014791] usb usb4:USB device found, idVendd6b, idProduct=0001 [ 6.021602] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.028818] usb usb4: Product: UHCI Host Controller [ 6.033707] usb usb4: Manufacturer: Linux 3.18.5-gentoo uhci_hcd [ 6.039709] usb usb: SerialNumber: 0000:00:1d.2 [ 6.045293] sd 1:0:1:0: [sdc] Write Protect is off [ 6.050679] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.068404] hub 4-0:1.0: USB hub found [ 6.072451] hub 4-0:1.0: 2 ports detected [ 6.079918] usbcore: registered new interface driver usb-storage [ 6.087477] sdc: sdc1 [ 6.089864] sdc: p1 size 320171008 extends beyond EOD, enabling native capacity [ 6.097284] ata2: soft resetting link [ 6.101881] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 6.114346] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.119367] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.129229] rtc_cmos 00:01: RTC can wake from S4 [ 6.136244] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 6.142492] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram [ 6.154589] usbcore: registered new interface driver usbhid [ 6.160162] usbhid: USB HID core driver [ 6.164582] TCP: cubic registered [ 6.168136] NET: Registered protocol family 17 [ 6.175028] Using IPI Shortcut mode [ 6.181514] kmemleak: Kernel memory leak detector initialized [ 6.187465] kmemleak: Automatic memoring thread started [ 6.290277] ata2.01: n_sectors mismatch 320170943 != 320173056 [ 6.296110] ata2.01: new n_sectors matches native, probably late HPA unlock, n_sectors updated [ 6.316824] ata2.00: configured for UDMA/33 [ 6.333679] ata2.01: configured for UDMA/100 [ 6.338154] ata2: EH complete [ 6.341736] sd 1:0:1:0: [sdc] 320173056 512-byte logical blocks: (163 GB/152 GiB) [ 6.351021] sdc: detected capacity change from 163927522816 to 163928604672 [ 6.383353] sdc: sdc1 [ 6.392088] sd 1:0:1:0: [sdc] Attached SCSI disk [ 7.074108] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3 [ 7.099112] EXT4-fs (sda4): couldn't mount as ext3 due to feature incompatibilities [ 7.107643] EXT4-fs (sda4): couldn't mount as ext2 due to feature incompatibilities [ 7.131071] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 7.176052] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 7.183800] VFS: Mounted root (ext4 filesystem) readonly on device 259:131072. [ 7.225785] devtmpfs: mounted [ 7.228843] debug: unmapping init [mem 0xc1542000-0xc15a3fff] [ 7.234731] Write protecting the kernel text: 3868k [ 7.239639] Write protecting the kernel read-only data: 1124k INIT: version 2.88 booting OpenRC 0.12.4 is starting up Gentoo Linux (i686) Press I to enter interactive boot mode * Mounting /proc ... [ ok ] * Mounting /run ... * /run/openrc: creating directory * /run/lock: creating directory * /run/lock: correcting owner [ 8.430577] random: nonblocking pool is initialized * Using /dev mounted from kernel ... [ ok ] * Mounting /dev/mqueue ... [ ok ] * Mounting /dev/pts ... [ ok ] * Mounting /dev/shm ... [ ok ] * Mounting /sys ... [ ok ] * Mounting debug filesystem ... [ ok ] * setting up tmpfiles.d entries for /dev ... [ ok ] * Starting udev ... [ ok ] * Generating a rule to create a /dev/root symlink ... [ ok ] * Populating /dev with existing devices through uevents ... [ ok ] * Waiting for uevents to be processed ... [ ok ] * Setting system clock using the hardware clock [UTC] ... [ ok ] * Checking local filesystems ... /dev/sda4: clean, 159644/1916928 files, 816931/7667200 blocks /dev/sda1: clean, 288/16384 files, 9338/65536 blocks [ ok ] * Remounting root filesystem read/write ... [ ok ] * Remounting filesystems ... [ ok ] * Updating /etc/mtab ... [ ok ] * Activating swap devices ... [ ok ] * Mounting local filesystems ... [ ok ] * Configuring kernel parameters ... [ ok ] * Creating user login records ... [ ok ] * Wiping /tmp directory ... [ ok ] * Setting hostname to hostname ... [ ok ] * Setting terminal encoding [UTF-8] ... [ ok ] * Setting keyboard mode [UTF-8] ... [ ok ] * Loading key mappings [sv-latin1] ... [ ok ] * Bringing up network interface lo ... [ ok ] * Mounting misc binary format filesystem ... [ ok ] * Loading custom binary format handlers ... [ ok ] * Activating additional swap space ... [ ok ] * setting up tmpfiles.d entries ... [ ok ] * Initializing random number generator ... [ ok ] INIT: Entering runlevel: 3 * Bringing up interface enp2s3 * dhcp ... * Running udhcpc ... [ ok ] * received address 192.168.1.82/24 [ ok ] * Mounting network filesystems ... [ ok ] * Checking your configfile (/etc/syslog-ng/syslog-ng.conf) ... [ ok ] * Starting syslog-ng ... [ ok ] * Starting local [ ok ] This is hostname.unknown_domain (Linux i686 3.18.5-gentoo) 00:35:37 hostname login: root Password: Last login: Sat Jan 31 00:32:24 CET 2015 on ttyS0 hostname ~ # lshw [ 29.410203] ------------[ cut here ]------------ [ 29.413339] kernel BUG at arch/x86/mm/physaddr.c:79! [ 29.413339] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC [ 29.413339] CPU: 0 PID: 717 Comm: lshw Not tainted 3.18.5-gentoo #1 [ 29.413339] Hardware name: MICRO-STAR INC. MS-6580/MS-6580, BIOS V3.4 11 11/14/2002 [ 29.413339] task: ede3cb20 ti: edfa2000 task.ti: edfa2000 [ 29.413339] EIP: 0060:[] EFLAGS: 00010206 CPU: 0 [ 29.413339] EIP is at __phys_addr+0x5f/0x63 [ 29.413339] EAX: 00000000 EBX: 2fff0000 ECX: 0000000c EDX: 0000000a [ 29.413339] ESI: 0000040e EDI: bfdec8d8 EBP: edfa3f40 ESP: edfa3f3c [ 29.413339] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 29.413339] CR0: 80050033 CR2: bfdec8cc CR3: 2d7f4000 CR4: 000007d0 [ 29.413339] Stack: [ 29.413339] 00000410 edfa3f64 c119d79b edddcc80 00000006 bfdec8d8 00000002 c0031c00 [ 29.413339] c119d766 bfdec8d8 edfa3f88 c10a3f7c edfa3f98 edfa3f88 c119d61b 00000003 [ 29.413339] c0031c00 c0031c00 bfdec8d8 edfa3fac c10a43cf edfa3f98 00000002 0000040e [ 29.413339] Call Trace: [ 29.413339] [] read_mem+0x35/0xd0 [ 29.413339] [] ? write_mem+0xe8/0xe8 [ 29.413339] [] vfs_read+0x66/0x106 [ 29.413339] [] ?memory_lseek+0x4b/0x82 [ 29.413339] [] SyS_read+0x41/0x7f [ 29.413339] [] sysenter_do_call+00x12 [ 29.413339] Code: 75 29 89 d8 5b 5d c3 0f 0b 8b 15 30 27 60 c1 81 c2 00 00 80 00 39 d0 72 cd 8b 15 6c b4 4f c1 81 ea 00 e0 05 00 39 d0 73 bd 0f 0b <0f> 0b 0f 0b 89 c2 3d ff ff ff bf 76 57 55 89 e5 53 80 3d 00 [ 29.413339] EIP: [] __phys_addr+0x5f/0x63 SS:ESP 0068:edfa3f3c [ 29.560410] ---[ end trace 77d202f00428ba2d ]--- [ 29.565024] Kernel panic - not syncing: Fatal exception [ 29.568353] Kernel Offset: 0x0 from 0xc1000000 (relocation range: 0xc00xf07effff) [ 29.56835drm_kms_helper: panic occurred, switching back to text console [ 29.585456] ---[ end Kernel panic - not syncing: Fatal exception