[patch] genkernel.conf patch

genkernel-conf-tweaks.patch (text/plain), 6.59 KB, created by Ben Kohler on 2014-12-09 21:39:21 UTC

--- genkernel.conf	2014-12-09 15:05:19.515084869 -0600
+++ genkernel.conf.new	2014-12-09 15:36:28.417597420 -0600
@@ -7,32 +7,31 @@
 
 # =========Common Command Line Option Defaults=========
 
-# Should we install to $BOOTDIR?  Default is "no" because genkernel is used in
-# catalyst and stage building.
+# Install to $BOOTDIR
 #INSTALL="yes"
 
-# Run 'make oldconfig' before compiling this kernel?
+# Run 'make oldconfig' before compiling this kernel
 OLDCONFIG="yes"
 
-# Run 'make menuconfig' before compiling this kernel?
+# Run 'make menuconfig' before compiling this kernel
 MENUCONFIG="no"
 
-# Run 'make clean' before compilation?
+# Run 'make clean' before compilation
 # If set to NO, implies MRPROPER WILL NOT be run
 # Also, if clean is NO, it won't copy over any configuration
 # file, it will use what's there.
 CLEAN="yes"
 
-# Run 'make mrproper' before configuration/compilation?
+# Run 'make mrproper' before configuration/compilation
 MRPROPER="yes"
 
-# Override the arch detection?
+# Override the arch detection
 #ARCH_OVERRIDE="x86"
 
-# Mount BOOTDIR automatically if it isn't mounted?
+# Mount BOOTDIR automatically if it isn't mounted
 MOUNTBOOT="yes"
 
-# Make symlinks in BOOTDIR automatically?
+# Make symlinks in BOOTDIR automatically
 #SYMLINK="no"
 
 # Save the new configuration in /etc/kernels upon
@@ -46,11 +45,11 @@
 #CLEAR_CACHE_DIR="yes"
 
 # Clear all tmp files and caches after genkernel has run
-#POSTCLEAR="1"
+#POSTCLEAR="no"
 
 # Genkernel uses an independent configuration for MAKEOPTS, and does not source
-# /etc/make.conf . You can override the default setting by uncommenting and
-# tweaking the following line. Default setting is set up by
+# /etc/portage/make.conf . You can override the default setting by uncommenting
+# and tweaking the following line. Default setting is set up by
 # ${GK_SHARE}/${ARCH_OVERRIDE}/config.sh . The recommended value for -j
 # argument is: <number of processors>*<number of cores per processor>+1
 #MAKEOPTS="-j2"
@@ -68,11 +67,11 @@
 # Add DMRAID support.
 #DMRAID="no"
 
-# Include (or suppresses the inclusion of) busybox in the initrd or initramfs.
-# If included, busybox is rebuilt if the cached copy is out of date.
+# Include busybox in the initrd or initramfs. If included, busybox is rebuilt
+# if the cached copy is out of date.
 #BUSYBOX="yes"
 
-# Includes mdadm/mdmon binaries in initramfs.
+# Include mdadm/mdmon binaries in initramfs.
 # Without sys-fs/mdadm[static] installed, this will build a static mdadm.
 #MDADM="no"
 
@@ -91,9 +90,10 @@
 #E2FSPROGS="no"
 
 # Include support for unionfs
-#UNIONFS="1"
+#UNIONFS="no"
 
-# Include support for zfs volume management.
+# Include support for zfs volume management.  If unset, genkernel will attempt
+# to autodetect and enable this when rootfs is on zfs.
 #ZFS="no"
 
 # Enable copying of firmware into initramfs
@@ -106,11 +106,11 @@
 # Enable disklabel support (copies blkid to initrd)
 DISKLABEL="yes"
 
-# Add new kernel to grub?
+# Add new kernel to grub
 #BOOTLOADER="grub"
 
-# Enable splashutils in early space (initrd). Default is "no".
-#SPLASH="yes"
+# Enable splashutils in early space (initrd)
+#SPLASH="no"
 
 # Use this splash theme. If commented out - the "default" name theme is used.
 # Also, SPLASH="yes" needs to be enabled for this one to one work.
@@ -122,14 +122,14 @@
 # use "emerge --quiet @module-rebuild" for >=portage-2.2
 #CMD_CALLBACK=""
 
+
 # =========Keymap Settings=========
 #
 # Force keymap selection at boot
-#DOKEYMAPAUTO="yes"
-
+#DOKEYMAPAUTO="no"
 
-# Disables keymap selection support
-#KEYMAP="0"
+# Enables keymap selection support
+#KEYMAP="yes"
 
 
 # =========Low Level Compile Settings=========
@@ -164,11 +164,9 @@
 # option.
 #UTILS_LD="ld"
 
-
 # Common prefix of cros compile commands
 #UTILS_CROSS_COMPILE="x86_64-pc-linux-gnu"
 
-
 # Value of CROSS_COMPILE utils variable
 # during kernel compilation
 #KERNEL_CROSS_COMPILE="x86_64-pc-linux-gnu"
@@ -179,7 +177,7 @@
 #   %%ARCH%%  - Final determined architecture
 #   %%CACHE%% - Final determined cache location
 
-# Set genkernel's temporary work directory.  Default is /var/tmp/genkernel
+# Set genkernel's temporary work directory
 #TMPDIR="/var/tmp/genkernel"
 
 # Set the boot directory, default is /boot
@@ -190,10 +188,13 @@
 
 # Location of the default cache
 CACHE_DIR="/var/cache/genkernel"
+
 # Location of DISTDIR, where our source tarballs are stored
 DISTDIR="${GK_SHARE}/distfiles"
+
 # Log output file
 LOGFILE="/var/log/genkernel.log"
+
 # Debug Level
 LOGLEVEL=1
 
@@ -201,6 +202,7 @@
 #
 # Default location of kernel source
 DEFAULT_KERNEL_SOURCE="/usr/src/linux"
+
 # Default kernel config (only use to override using
 # arch/%%ARCH%%/kernel-config-${VER}.${PAT} !)
 #DEFAULT_KERNEL_CONFIG="${GK_SHARE}/arch/%%ARCH%%/kernel-config"
@@ -223,27 +225,22 @@
 # 'genkernel'
 #KNAME="genkernel"
 
-
 # This option is only valid if kerncache is
 # defined. If there is a valid kerncache no checks
 # will be made against a kernel source tree
-#KERNEL_SOURCES="0"
-
+#KERNEL_SOURCES="yes"
 
 # Build a static (monolithic kernel)
-#BUILD_STATIC="1"
-
+#BUILD_STATIC="no"
 
 # Make and install kernelz image (PowerPC)
-#GENZIMAGE="1"
-
+#GENZIMAGE="no"
 
 # File to output a .tar.bz2'd kernel contents
 # of /lib/modules/ and the kernel config
 # NOTE: This is created before the callbacks
 # are run!
-#KERNCACHE="/path/to/file"
-
+#KERNCACHE="/path/to/file.bz2"
 
 # Prefix to kernel module destination, modules
 # will be installed in <prefix>/lib/modules
@@ -253,34 +250,28 @@
 
 # =========MISC INITRD CONFIGURATION============
 #
-# Copy all kernel modules to the ramdisk
-#ALLRAMDISKMODULES="1"
-
-
-# Don't copy any modules to the ramdisk
-#RAMDISKMODULES="0"
+# Copy all compiled kernel modules to the ramdisk
+#ALLRAMDISKMODULES="no"
 
+# Copy selected modules to the ramdisk based on arch-specific modules_load file
+#RAMDISKMODULES="yes"
 
 # File to output a .tar.bz2'd kernel and ramdisk:
 # No modules outside of the ramdisk will be
 # included...
 #MINKERNPACKAGE="/path/to/file.bz2"
 
-
 # File to output a .tar.bz2'd modules after the
 # callbacks have run
 #MODULESPACKAGE="/path/to/file.bz2"
 
-
 # Directory structure to include in the initramfs,
 # only available on >=2.6 kernels
 #INITRAMFS_OVERLAY=""
 
-
 # Build the generated initramfs into the kernel instead of
 # keeping it as a separate file
-#INTEGRATED_INITRAMFS="1"
-
+#INTEGRATED_INITRAMFS="no"
 
 # Compress generated initramfs
 #COMPRESS_INITRD="yes"
@@ -289,9 +280,8 @@
 # "fastest" selects the fastest available compression method
 #COMPRESS_INITRD_TYPE="best"
 
-
 # Create a self-contained env in the initramfs
-#NETBOOT="1"
+#NETBOOT="no"
 
 
 # =========MISC BOOT CONFIGURATION============