[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.30-gentoo (root@localhost) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) ) #5 SMP Mon Apr 21 23:05:18 MSK 2014 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.30-gentoo root=/dev/sda2 ro panic=7 nouveau.modeset=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff7ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ff80000-0x000000007ff8dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ff8e000-0x000000007ffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: System manufacturer P5K SE/P5K SE, BIOS 1402 06/25/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7ff80 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01edb000, 0x01edbfff] PGTABLE [ 0.000000] BRK [0x01edc000, 0x01edcfff] PGTABLE [ 0.000000] BRK [0x01edd000, 0x01eddfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff] [ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M [ 0.000000] BRK [0x01ede000, 0x01edefff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff] [ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x7bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ff7ffff] [ 0.000000] [mem 0x7fe00000-0x7ff7ffff] page 4k [ 0.000000] BRK [0x01edf000, 0x01edffff] PGTABLE [ 0.000000] ACPI: RSDP 00000000000fbdd0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 000000007ff80100 00054 (v01 A_M_I_ OEMXSDT 06000925 MSFT 00000097) [ 0.000000] ACPI: FACP 000000007ff80290 000F4 (v03 A_M_I_ OEMFACP 06000925 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000007ff805c0 07EB9 (v01 A0807 A0807000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 000000007ff8e000 00040 [ 0.000000] ACPI: APIC 000000007ff80390 0006C (v01 A_M_I_ OEMAPIC 06000925 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000007ff80400 0003C (v01 A_M_I_ OEMMCFG 06000925 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000007ff8e040 00081 (v01 A_M_I_ AMI_OEM 06000925 MSFT 00000097) [ 0.000000] ACPI: HPET 000000007ff88480 00038 (v01 A_M_I_ OEMHPET 06000925 MSFT 00000097) [ 0.000000] ACPI: OSFR 000000007ff884c0 000B0 (v01 A_M_I_ OEMOSFR 06000925 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x7ff7ffff] [ 0.000000] On node 0 totalpages: 524062 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7111 pages used for memmap [ 0.000000] DMA32 zone: 520064 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: 4 Processors exceeds NR_CPUS limit of 2 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s81408 r8192 d20992 u1048576 [ 0.000000] pcpu-alloc: s81408 r8192 d20992 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516874 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.30-gentoo root=/dev/sda2 ro panic=7 nouveau.modeset=1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 2048864k/2096640k available (6917k kernel code, 392k absent, 47384k reserved, 6228k data, 1156k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3009.047 MHz processor [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6018.09 BogoMIPS (lpj=3009047) [ 0.001155] pid_max: default: 32768 minimum: 301 [ 0.001291] Mount-cache hash table entries: 256 [ 0.002169] Initializing cgroup subsys devices [ 0.002247] Initializing cgroup subsys freezer [ 0.002322] Initializing cgroup subsys blkio [ 0.002396] Initializing cgroup subsys perf_event [ 0.002472] Initializing cgroup subsys net_prio [ 0.002580] Disabled fast string operations [ 0.002663] CPU: Physical Processor ID: 0 [ 0.002736] CPU: Processor Core ID: 0 [ 0.002810] mce: CPU supports 4 MCE banks [ 0.002896] CPU0: Thermal monitoring enabled (TM2) [ 0.002979] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64 tlb_flushall_shift: 6 [ 0.003066] Freeing SMP alternatives: 28k freed [ 0.003157] ACPI: Core revision 20130328 [ 0.007826] ACPI: All ACPI Tables successfully acquired [ 0.008015] ftrace: allocating 26708 entries in 105 pages [ 0.018485] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.029181] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz (fam: 0f, model: 06, stepping: 05) [ 0.030000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.030000] ... version: 0 [ 0.030000] ... bit width: 40 [ 0.030000] ... generic registers: 18 [ 0.030000] ... value mask: 000000ffffffffff [ 0.030000] ... max period: 0000007fffffffff [ 0.030000] ... fixed-purpose events: 0 [ 0.030000] ... event mask: 000000000003ffff [ 0.031106] smpboot: Booting Node 0, Processors #1 OK [ 0.002000] Disabled fast string operations [ 0.043055] Brought up 2 CPUs [ 0.043208] smpboot: Total of 2 processors activated (12036.18 BogoMIPS) [ 0.044153] devtmpfs: initialized [ 0.044426] PM: Registering ACPI NVS region [mem 0x7ff8e000-0x7ffdffff] (335872 bytes) [ 0.046186] regulator-dummy: no parameters [ 0.046354] NET: Registered protocol family 16 [ 0.046701] ACPI: bus type PCI registered [ 0.046840] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.046959] PCI: not using MMCONFIG [ 0.047004] PCI: Using configuration type 1 for base access [ 0.049353] bio: create slab at 0 [ 0.050084] ACPI: Added _OSI(Module Device) [ 0.050161] ACPI: Added _OSI(Processor Device) [ 0.050236] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.050312] ACPI: Added _OSI(Processor Aggregator Device) [ 0.052247] ACPI: EC: Look up EC in DSDT [ 0.054050] ACPI: Executed 1 blocks of module-level executable AML code [ 0.060117] ACPI: SSDT 000000007ff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.060735] ACPI: Dynamic OEM Table Load: [ 0.060874] ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.061278] ACPI: SSDT 000000007ff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.061878] ACPI: Dynamic OEM Table Load: [ 0.062073] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.062497] ACPI: Interpreter enabled [ 0.062581] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.062764] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.062962] ACPI: (supports S0 S3 S4 S5) [ 0.063004] ACPI: Using IOAPIC for interrupt routing [ 0.063118] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.064129] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.086021] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.086263] ACPI: No dock devices found. [ 0.097430] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.097802] PCI host bridge to bus 0000:00 [ 0.097881] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.097959] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.098005] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.098084] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.098162] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.098239] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff] [ 0.098329] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.098488] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.098546] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.098630] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.098787] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.098838] pci 0000:00:1a.0: reg 20: [io 0xc800-0xc81f] [ 0.099029] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.099160] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.099210] pci 0000:00:1a.1: reg 20: [io 0xc880-0xc89f] [ 0.099352] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.099484] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.099534] pci 0000:00:1a.2: reg 20: [io 0xcc00-0xcc1f] [ 0.099675] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.099821] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.099847] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff] [ 0.099951] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.100046] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.100181] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.100201] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit] [ 0.100281] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.100410] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.100491] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.100577] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.100710] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.100792] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.100882] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.101021] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400 [ 0.101104] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.101192] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.101324] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.101373] pci 0000:00:1d.0: reg 20: [io 0xc080-0xc09f] [ 0.101516] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.101646] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.101696] pci 0000:00:1d.1: reg 20: [io 0xc400-0xc41f] [ 0.101837] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.101967] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.102024] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f] [ 0.102166] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.102306] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.102332] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff] [ 0.102436] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.102523] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.102651] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.102782] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.102914] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.103008] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.103128] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.103209] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.103478] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018a [ 0.103498] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.103508] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.103518] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.103527] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.103537] pci 0000:00:1f.2: reg 20: [io 0xff90-0xff9f] [ 0.103547] pci 0000:00:1f.2: reg 24: [io 0xffa0-0xffaf] [ 0.103702] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.103722] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit] [ 0.103746] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.103882] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185 [ 0.103903] pci 0000:00:1f.5: reg 10: [io 0xc000-0xc007] [ 0.103913] pci 0000:00:1f.5: reg 14: [io 0xbc00-0xbc03] [ 0.103922] pci 0000:00:1f.5: reg 18: [io 0xb880-0xb887] [ 0.103932] pci 0000:00:1f.5: reg 1c: [io 0xb800-0xb803] [ 0.103942] pci 0000:00:1f.5: reg 20: [io 0xb480-0xb48f] [ 0.103952] pci 0000:00:1f.5: reg 24: [io 0xb400-0xb40f] [ 0.104175] pci 0000:01:00.0: [10de:0614] type 00 class 0x030000 [ 0.104191] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.104205] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.104219] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.104229] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f] [ 0.104239] pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref] [ 0.104342] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.104422] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.104428] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff] [ 0.104434] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.104506] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.104593] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.104682] pci 0000:03:00.0: [11ab:6121] type 00 class 0x01018f [ 0.104702] pci 0000:03:00.0: reg 10: [io 0xec00-0xec07] [ 0.104716] pci 0000:03:00.0: reg 14: [io 0xe880-0xe883] [ 0.104730] pci 0000:03:00.0: reg 18: [io 0xe800-0xe807] [ 0.104743] pci 0000:03:00.0: reg 1c: [io 0xe480-0xe483] [ 0.104757] pci 0000:03:00.0: reg 20: [io 0xe400-0xe40f] [ 0.104771] pci 0000:03:00.0: reg 24: [mem 0xfebffc00-0xfebfffff] [ 0.104844] pci 0000:03:00.0: supports D1 [ 0.104847] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.104914] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.105013] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.105093] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.105099] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.106005] pci 0000:02:00.0: [1969:1048] type 00 class 0x020000 [ 0.106032] pci 0000:02:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit] [ 0.106091] pci 0000:02:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref] [ 0.106154] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.106218] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.106345] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.106427] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff] [ 0.106524] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.106613] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.106617] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.106621] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.106624] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.106627] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode) [ 0.106652] pci_bus 0000:00: on NUMA node 0 [ 0.106657] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.106773] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.107848] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12 14 15) [ 0.108364] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.108889] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.109460] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.110037] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.110693] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.111235] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.111790] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.112438] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.112584] acpi root: \_SB_.PCI0 notify handler is installed [ 0.112638] Found 1 acpi root devices [ 0.112711] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.112711] vgaarb: loaded [ 0.112711] vgaarb: bridge control possible 0000:01:00.0 [ 0.113143] SCSI subsystem initialized [ 0.113267] libata version 3.00 loaded. [ 0.113267] ACPI: bus type USB registered [ 0.113267] usbcore: registered new interface driver usbfs [ 0.113269] usbcore: registered new interface driver hub [ 0.113350] usbcore: registered new device driver usb [ 0.113350] Advanced Linux Sound Architecture Driver Initialized. [ 0.113350] PCI: Using ACPI for IRQ routing [ 0.120653] PCI: pci_cache_line_size set to 64 bytes [ 0.120723] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.120729] e820: reserve RAM buffer [mem 0x7ff80000-0x7fffffff] [ 0.120873] NET: Registered protocol family 8 [ 0.120948] NET: Registered protocol family 20 [ 0.121109] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.121191] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.121425] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.124016] Switching to clocksource hpet [ 0.136371] FS-Cache: Loaded [ 0.136541] CacheFiles: Loaded [ 0.140123] pnp: PnP ACPI init [ 0.140210] ACPI: bus type PNP registered [ 0.140393] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.140476] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.140552] pnp 00:01: [dma 4] [ 0.140585] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.140649] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.140701] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.140753] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.141051] system 00:05: [io 0x0290-0x0297] has been reserved [ 0.141132] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.141386] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.141466] system 00:06: [io 0x0800-0x087f] has been reserved [ 0.141545] system 00:06: [io 0x0480-0x04bf] has been reserved [ 0.141623] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.141702] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.141780] system 00:06: [mem 0xfed50000-0xfed8ffff] has been reserved [ 0.141858] system 00:06: [mem 0xffa00000-0xffafffff] has been reserved [ 0.141937] system 00:06: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.142027] system 00:06: [mem 0xffe00000-0xffefffff] has been reserved [ 0.142107] system 00:06: [mem 0xfff00000-0xfffffffe] has been reserved [ 0.142186] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.142329] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.142678] pnp 00:08: [dma 0 disabled] [ 0.142776] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.142899] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.142980] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.143071] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143167] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.143268] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.143349] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143641] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.143722] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.143802] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.143880] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.143960] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.144210] pnp: PnP ACPI: found 13 devices [ 0.144286] ACPI: bus type PNP unregistered [ 0.148942] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.148948] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 [ 0.148961] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.148972] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.148976] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.148992] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 [ 0.148996] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.149000] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.149013] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.149017] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.149024] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff] [ 0.149103] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref] [ 0.149220] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref] [ 0.149337] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.149415] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff] [ 0.149494] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.149571] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.149650] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff] [ 0.149729] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.149847] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.149924] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.150013] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff] [ 0.150095] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.150216] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.150293] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.150373] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.150452] pci 0000:00:1c.4: bridge window [mem 0x80400000-0x805fffff 64bit pref] [ 0.150571] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.150647] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.150727] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff] [ 0.150806] pci 0000:00:1c.5: bridge window [mem 0x80600000-0x807fffff 64bit pref] [ 0.150926] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.151140] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.151410] pci 0000:00:1c.5: enabling device (0106 -> 0107) [ 0.151584] pci 0000:00:1e.0: setting latency timer to 64 [ 0.151591] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.151595] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.151598] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.151601] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.151604] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff] [ 0.151608] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.151611] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe9fffff] [ 0.151614] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.151617] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.151621] pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff] [ 0.151624] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.151627] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.151630] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.151633] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref] [ 0.151637] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.151640] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.151643] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref] [ 0.151646] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.151650] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.151653] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.151656] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff] [ 0.151659] pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff] [ 0.151735] NET: Registered protocol family 2 [ 0.152076] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.152285] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.152452] TCP: Hash tables configured (established 16384 bind 16384) [ 0.152581] TCP: reno registered [ 0.152658] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.152748] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.152907] NET: Registered protocol family 1 [ 0.153116] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.153121] pci 0000:00:1a.0: Performing full reset [ 0.153327] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.153331] pci 0000:00:1a.1: Performing full reset [ 0.153535] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.153539] pci 0000:00:1a.2: Performing full reset [ 0.153956] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.153960] pci 0000:00:1d.0: Performing full reset [ 0.154176] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.154179] pci 0000:00:1d.1: Performing full reset [ 0.154378] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.154382] pci 0000:00:1d.2: Performing full reset [ 0.154705] pci 0000:01:00.0: Boot video device [ 0.154716] PCI: CLS 32 bytes, default 64 [ 0.167234] DMA-API: preallocated 65536 debug entries [ 0.167317] DMA-API: debugging enabled by kernel config [ 0.167579] Machine check injector initialized [ 0.167965] microcode: CPU0 sig=0xf65, pf=0x4, revision=0xb [ 0.168071] microcode: CPU1 sig=0xf65, pf=0x4, revision=0xb [ 0.168202] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.168320] Scanning for low memory corruption every 60 seconds [ 0.168504] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 0.168812] audit: initializing netlink socket (disabled) [ 0.168905] type=2000 audit(1412546038.167:1): initialized [ 0.193876] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.194575] DLM installed [ 0.194805] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.194958] NTFS driver 2.1.30 [Flags: R/W DEBUG]. [ 0.195100] ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.195233] fuse init (API version 7.22) [ 0.195432] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 0.195832] msgmni has been set to 4001 [ 0.196776] NET: Registered protocol family 38 [ 0.196883] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.197064] io scheduler noop registered [ 0.197161] io scheduler cfq registered (default) [ 0.197357] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.197441] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.197529] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 0.197617] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.219441] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 0.219563] Hangcheck: Using getrawmonotonic(). [ 0.222422] ipmi message handler version 39.2 [ 0.222502] ipmi device interface [ 0.222593] IPMI System Interface driver. [ 0.222711] ipmi_si: Adding default-specified kcs state machine [ 0.222821] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 0.222943] ipmi_si: Interface detection failed [ 0.228018] ipmi_si: Adding default-specified smic state machine [ 0.228136] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 0.228256] ipmi_si: Interface detection failed [ 0.233018] ipmi_si: Adding default-specified bt state machine [ 0.233135] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 0.233255] ipmi_si: Interface detection failed [ 0.238046] ipmi_si: Unable to find any System Interface(s) [ 0.238132] IPMI Watchdog: driver initialized [ 0.238206] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 0.238420] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.238541] ACPI: Power Button [PWRB] [ 0.238679] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.238797] ACPI: Power Button [PWRF] [ 0.239026] ACPI: Requesting acpi_cpufreq [ 0.244578] brd: module loaded [ 0.244834] loop: module loaded [ 0.245149] ata_piix 0000:00:1f.2: version 2.13 [ 0.245285] ata_piix 0000:00:1f.2: MAP [ [ 0.245361] P0 -- P1 -- ] [ 0.245608] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.245911] scsi0 : ata_piix [ 0.246120] scsi1 : ata_piix [ 0.246250] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14 [ 0.246331] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15 [ 0.246553] ata_piix 0000:00:1f.5: MAP [ [ 0.246629] P0 -- P1 -- ] [ 0.246868] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.247166] scsi2 : ata_piix [ 0.247334] scsi3 : ata_piix [ 0.247467] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 22 [ 0.247547] ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 22 [ 0.248245] scsi4 : pata_marvell [ 0.248407] scsi5 : pata_marvell [ 0.248533] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16 [ 0.248613] ata6: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16 [ 0.248895] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.248989] platform physmap-flash.0: failed to claim resource 0 [ 0.249150] slram: not enough parameters. [ 0.249345] atl1 0000:02:00.0: version 2.1.3 [ 0.253235] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 0.253312] Copyright (c) 2007 Atheros Corporation. [ 0.253467] PPP generic driver version 2.4.2 [ 0.254394] PPP BSD Compression module registered [ 0.254470] PPP Deflate Compression module registered [ 0.254550] PPP MPPE Compression module registered [ 0.254625] NET: Registered protocol family 24 [ 0.254709] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.254786] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 0.254795] ehci-pci: EHCI PCI platform driver [ 0.254998] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 0.255025] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.255109] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.255240] ehci-pci 0000:00:1a.7: debug port 1 [ 0.255320] ehci-pci 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 0.255326] ehci-pci 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 0.255372] ehci-pci 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.259272] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 0.259276] ehci-pci 0000:00:1a.7: supports USB remote wakeup [ 0.259297] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fffc00 [ 0.259378] ehci-pci 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.265027] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.265158] usb usb1: default language 0x0409 [ 0.265170] usb usb1: udev 1, busnum 1, minor = 0 [ 0.265174] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.265251] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.265366] usb usb1: Product: EHCI Host Controller [ 0.265441] usb usb1: Manufacturer: Linux 3.10.30-gentoo ehci_hcd [ 0.265517] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.265716] usb usb1: usb_probe_device [ 0.265721] usb usb1: configuration #1 chosen from 1 choice [ 0.265734] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.265764] hub 1-0:1.0: usb_probe_interface [ 0.265769] hub 1-0:1.0: usb_probe_interface - got id [ 0.265773] hub 1-0:1.0: USB hub found [ 0.265855] hub 1-0:1.0: 6 ports detected [ 0.265931] hub 1-0:1.0: standalone hub [ 0.265933] hub 1-0:1.0: no power switching (usb 1.0) [ 0.265936] hub 1-0:1.0: individual port over-current protection [ 0.265939] hub 1-0:1.0: power on to power good time: 20ms [ 0.265946] hub 1-0:1.0: local power source is good [ 0.266061] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.266255] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 0.266270] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.266351] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.266483] ehci-pci 0000:00:1d.7: debug port 1 [ 0.266563] ehci-pci 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 0.266568] ehci-pci 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 0.266612] ehci-pci 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.270502] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 0.270506] ehci-pci 0000:00:1d.7: supports USB remote wakeup [ 0.270528] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800 [ 0.270609] ehci-pci 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.276030] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.276142] usb usb2: default language 0x0409 [ 0.276152] usb usb2: udev 1, busnum 2, minor = 128 [ 0.276155] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.276233] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.276348] usb usb2: Product: EHCI Host Controller [ 0.276423] usb usb2: Manufacturer: Linux 3.10.30-gentoo ehci_hcd [ 0.276499] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.276683] usb usb2: usb_probe_device [ 0.276687] usb usb2: configuration #1 chosen from 1 choice [ 0.276699] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.276728] hub 2-0:1.0: usb_probe_interface [ 0.276732] hub 2-0:1.0: usb_probe_interface - got id [ 0.276736] hub 2-0:1.0: USB hub found [ 0.276814] hub 2-0:1.0: 6 ports detected [ 0.276889] hub 2-0:1.0: standalone hub [ 0.276891] hub 2-0:1.0: no power switching (usb 1.0) [ 0.276894] hub 2-0:1.0: individual port over-current protection [ 0.276897] hub 2-0:1.0: power on to power good time: 20ms [ 0.276903] hub 2-0:1.0: local power source is good [ 0.276990] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.277093] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.277171] ohci_hcd: block sizes: ed 80 td 96 [ 0.277196] uhci_hcd: USB Universal Host Controller Interface driver [ 0.277405] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.277411] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.277493] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.277613] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.277691] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.277694] uhci_hcd 0000:00:1a.0: Performing full reset [ 0.277709] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 0.277718] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800 [ 0.277854] usb usb3: default language 0x0409 [ 0.277865] usb usb3: udev 1, busnum 3, minor = 256 [ 0.277868] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.277946] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.278076] usb usb3: Product: UHCI Host Controller [ 0.278153] usb usb3: Manufacturer: Linux 3.10.30-gentoo uhci_hcd [ 0.278229] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.278410] usb usb3: usb_probe_device [ 0.278414] usb usb3: configuration #1 chosen from 1 choice [ 0.278425] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.278455] hub 3-0:1.0: usb_probe_interface [ 0.278459] hub 3-0:1.0: usb_probe_interface - got id [ 0.278463] hub 3-0:1.0: USB hub found [ 0.278542] hub 3-0:1.0: 2 ports detected [ 0.278618] hub 3-0:1.0: standalone hub [ 0.278620] hub 3-0:1.0: no power switching (usb 1.0) [ 0.278623] hub 3-0:1.0: individual port over-current protection [ 0.278625] hub 3-0:1.0: power on to power good time: 2ms [ 0.278631] hub 3-0:1.0: local power source is good [ 0.278665] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.278728] uhci_hcd 0000:00:1a.0: FS/LS companion for 0000:00:1a.7 [ 0.278848] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.278854] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.278937] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.279080] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.279160] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.279163] uhci_hcd 0000:00:1a.1: Performing full reset [ 0.279178] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 0.279200] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880 [ 0.279335] usb usb4: default language 0x0409 [ 0.279347] usb usb4: udev 1, busnum 4, minor = 384 [ 0.279350] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.279428] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.279542] usb usb4: Product: UHCI Host Controller [ 0.279618] usb usb4: Manufacturer: Linux 3.10.30-gentoo uhci_hcd [ 0.279694] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.279876] usb usb4: usb_probe_device [ 0.279881] usb usb4: configuration #1 chosen from 1 choice [ 0.279892] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.279924] hub 4-0:1.0: usb_probe_interface [ 0.279928] hub 4-0:1.0: usb_probe_interface - got id [ 0.279932] hub 4-0:1.0: USB hub found [ 0.280024] hub 4-0:1.0: 2 ports detected [ 0.280101] hub 4-0:1.0: standalone hub [ 0.280104] hub 4-0:1.0: no power switching (usb 1.0) [ 0.280107] hub 4-0:1.0: individual port over-current protection [ 0.280110] hub 4-0:1.0: power on to power good time: 2ms [ 0.280115] hub 4-0:1.0: local power source is good [ 0.280150] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.280222] uhci_hcd 0000:00:1a.1: FS/LS companion for 0000:00:1a.7 [ 0.280344] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.280350] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.280430] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.280551] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.280629] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.280632] uhci_hcd 0000:00:1a.2: Performing full reset [ 0.280647] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 0.280655] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00 [ 0.280787] usb usb5: default language 0x0409 [ 0.280798] usb usb5: udev 1, busnum 5, minor = 512 [ 0.280801] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.280879] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.280994] usb usb5: Product: UHCI Host Controller [ 0.281083] usb usb5: Manufacturer: Linux 3.10.30-gentoo uhci_hcd [ 0.281161] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.281338] usb usb5: usb_probe_device [ 0.281343] usb usb5: configuration #1 chosen from 1 choice [ 0.281353] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 0.281379] hub 5-0:1.0: usb_probe_interface [ 0.281384] hub 5-0:1.0: usb_probe_interface - got id [ 0.281389] hub 5-0:1.0: USB hub found [ 0.281467] hub 5-0:1.0: 2 ports detected [ 0.281541] hub 5-0:1.0: standalone hub [ 0.281544] hub 5-0:1.0: no power switching (usb 1.0) [ 0.281546] hub 5-0:1.0: individual port over-current protection [ 0.281549] hub 5-0:1.0: power on to power good time: 2ms [ 0.281555] hub 5-0:1.0: local power source is good [ 0.281591] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 0.281650] uhci_hcd 0000:00:1a.2: FS/LS companion for 0000:00:1a.7 [ 0.281773] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.281778] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.281860] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.281982] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.282081] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.282087] uhci_hcd 0000:00:1d.0: Performing full reset [ 0.282102] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 0.282113] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080 [ 0.282248] usb usb6: default language 0x0409 [ 0.282258] usb usb6: udev 1, busnum 6, minor = 640 [ 0.282262] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.282340] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.282454] usb usb6: Product: UHCI Host Controller [ 0.282529] usb usb6: Manufacturer: Linux 3.10.30-gentoo uhci_hcd [ 0.282605] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.282783] usb usb6: usb_probe_device [ 0.282787] usb usb6: configuration #1 chosen from 1 choice [ 0.282797] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 0.282824] hub 6-0:1.0: usb_probe_interface [ 0.282829] hub 6-0:1.0: usb_probe_interface - got id [ 0.282833] hub 6-0:1.0: USB hub found [ 0.282912] hub 6-0:1.0: 2 ports detected [ 0.282986] hub 6-0:1.0: standalone hub [ 0.282989] hub 6-0:1.0: no power switching (usb 1.0) [ 0.282991] hub 6-0:1.0: individual port over-current protection [ 0.282994] hub 6-0:1.0: power on to power good time: 2ms [ 0.282999] hub 6-0:1.0: local power source is good [ 0.283049] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 0.283111] uhci_hcd 0000:00:1d.0: FS/LS companion for 0000:00:1d.7 [ 0.283228] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.283234] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.283316] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.283437] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.283515] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.283517] uhci_hcd 0000:00:1d.1: Performing full reset [ 0.283532] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 0.283554] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400 [ 0.283690] usb usb7: default language 0x0409 [ 0.283700] usb usb7: udev 1, busnum 7, minor = 768 [ 0.283704] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.283782] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.283896] usb usb7: Product: UHCI Host Controller [ 0.283972] usb usb7: Manufacturer: Linux 3.10.30-gentoo uhci_hcd [ 0.284062] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.284246] usb usb7: usb_probe_device [ 0.284251] usb usb7: configuration #1 chosen from 1 choice [ 0.284261] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 0.284288] hub 7-0:1.0: usb_probe_interface [ 0.284292] hub 7-0:1.0: usb_probe_interface - got id [ 0.284297] hub 7-0:1.0: USB hub found [ 0.284375] hub 7-0:1.0: 2 ports detected [ 0.284450] hub 7-0:1.0: standalone hub [ 0.284452] hub 7-0:1.0: no power switching (usb 1.0) [ 0.284455] hub 7-0:1.0: individual port over-current protection [ 0.284457] hub 7-0:1.0: power on to power good time: 2ms [ 0.284464] hub 7-0:1.0: local power source is good [ 0.284498] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 0.284561] uhci_hcd 0000:00:1d.1: FS/LS companion for 0000:00:1d.7 [ 0.284678] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.284684] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.284765] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.284887] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.284966] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.284969] uhci_hcd 0000:00:1d.2: Performing full reset [ 0.284983] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 0.284991] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480 [ 0.285146] usb usb8: default language 0x0409 [ 0.285156] usb usb8: udev 1, busnum 8, minor = 896 [ 0.285160] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.285238] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.285352] usb usb8: Product: UHCI Host Controller [ 0.285428] usb usb8: Manufacturer: Linux 3.10.30-gentoo uhci_hcd [ 0.285504] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.285680] usb usb8: usb_probe_device [ 0.285685] usb usb8: configuration #1 chosen from 1 choice [ 0.285696] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 0.285725] hub 8-0:1.0: usb_probe_interface [ 0.285730] hub 8-0:1.0: usb_probe_interface - got id [ 0.285733] hub 8-0:1.0: USB hub found [ 0.285814] hub 8-0:1.0: 2 ports detected [ 0.285890] hub 8-0:1.0: standalone hub [ 0.285893] hub 8-0:1.0: no power switching (usb 1.0) [ 0.285895] hub 8-0:1.0: individual port over-current protection [ 0.285898] hub 8-0:1.0: power on to power good time: 2ms [ 0.285904] hub 8-0:1.0: local power source is good [ 0.285939] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 0.286014] uhci_hcd 0000:00:1d.2: FS/LS companion for 0000:00:1d.7 [ 0.286113] usbcore: registered new interface driver usb-storage [ 0.286203] usbcore: registered new interface driver ums-cypress [ 0.286294] usbcore: registered new interface driver ums-datafab [ 0.286416] usbcore: registered new interface driver usbserial [ 0.286505] usbcore: registered new interface driver usbserial_generic [ 0.286590] usbserial: USB Serial support registered for generic [ 0.286685] usbcore: registered new interface driver usblcd [ 0.286783] usbcore: registered new interface driver ldusb [ 0.286873] usbcore: registered new interface driver usbled [ 0.287031] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.287110] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.287895] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.288183] mousedev: PS/2 mouse device common for all mice [ 0.288460] rtc_cmos 00:02: RTC can wake from S4 [ 0.288702] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.288808] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.288937] i2c /dev entries driver [ 0.289196] ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20130328/utaddress-251) [ 0.289385] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.290040] intel_powerclamp: Intel powerclamp does not run on family 15 model 6 [ 0.290174] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 0.290275] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860) [ 0.290498] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 0.290583] iTCO_vendor_support: vendor-support=0 [ 0.290663] cpuidle: using governor ladder [ 0.290759] leds_ss4200: no LED devices found [ 0.291249] hidraw: raw HID events driver (C) Jiri Kosina [ 0.291374] usbcore: registered new interface driver usbhid [ 0.291450] usbhid: USB HID core driver [ 0.291961] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 0.311920] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2 [ 0.312167] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3 [ 0.312378] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 0.312584] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 0.312793] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 0.312999] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 0.313221] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 0.313428] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 0.314438] Netfilter messages via NETLINK v0.30. [ 0.314541] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 0.314768] ctnetlink v0.93: registering with nfnetlink. [ 0.314931] ipip: IPv4 over IPv4 tunneling driver [ 0.315372] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.315501] TCP: bic registered [ 0.315576] TCP: cubic registered [ 0.315649] TCP: westwood registered [ 0.315722] TCP: htcp registered [ 0.315795] Initializing XFRM netlink socket [ 0.315873] NET: Registered protocol family 17 [ 0.315956] NET: Registered protocol family 15 [ 0.316075] NET: Registered protocol family 33 [ 0.316154] Key type rxrpc registered [ 0.316236] Key type rxrpc_s registered [ 0.316332] l2tp_core: L2TP core driver, V2.0 [ 0.317190] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 0.317941] sctp: Hash tables configured (established 65536 bind 65536) [ 0.318164] Key type dns_resolver registered [ 0.319161] console [netcon0] enabled [ 0.319237] netconsole: network logging started [ 0.319348] rtc_cmos 00:02: setting system clock to 2014-10-05 21:53:58 UTC (1412546038) [ 0.320082] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.320180] EDD information not available. [ 0.320314] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input10 [ 0.320359] ALSA device list: [ 0.320362] #0: HDA Intel at 0xf9ff8000 irq 44 [ 0.366059] ehci-pci 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.366067] hub 1-0:1.0: port 6: status 0501 change 0001 [ 0.377058] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 0.377078] hub 2-0:1.0: hub_suspend [ 0.377089] usb usb2: bus auto-suspend, wakeup 1 [ 0.377093] ehci-pci 0000:00:1d.7: suspend root hub [ 0.378044] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.378058] hub 3-0:1.0: hub_suspend [ 0.378065] usb usb3: bus auto-suspend, wakeup 1 [ 0.378070] usb usb3: suspend_rh [ 0.380045] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.380059] hub 4-0:1.0: hub_suspend [ 0.380066] usb usb4: bus auto-suspend, wakeup 1 [ 0.380070] usb usb4: suspend_rh [ 0.381029] uhci_hcd 0000:00:1a.2: port 2 portsc 008a,00 [ 0.383044] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.383058] hub 6-0:1.0: hub_suspend [ 0.383066] usb usb6: bus auto-suspend, wakeup 1 [ 0.383070] usb usb6: suspend_rh [ 0.384042] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.384054] hub 7-0:1.0: hub_suspend [ 0.384062] usb usb7: bus auto-suspend, wakeup 1 [ 0.384066] usb usb7: suspend_rh [ 0.385042] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.385055] hub 8-0:1.0: hub_suspend [ 0.385063] usb usb8: bus auto-suspend, wakeup 1 [ 0.385067] usb usb8: suspend_rh [ 0.466034] hub 1-0:1.0: state 7 ports 6 chg 0040 evt 0000 [ 0.466048] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 0.517279] ehci-pci 0000:00:1a.7: port 6 full speed --> companion [ 0.517289] ehci-pci 0000:00:1a.7: GetStatus port:6 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 0.517295] hub 1-0:1.0: port_wait_reset: err = -16 [ 0.517299] hub 1-0:1.0: port 6 not enabled, trying reset again... [ 0.561951] ata2: SATA link down (SStatus 0 SControl 300) [ 0.563958] ata4: SATA link down (SStatus 0 SControl 300) [ 0.574979] ata3: SATA link down (SStatus 0 SControl 300) [ 0.713062] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.716272] ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133 [ 0.716354] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.718042] ehci-pci 0000:00:1a.7: GetStatus port:6 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 0.718080] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 0.718093] uhci_hcd 0000:00:1a.2: port 2 portsc 0093,00 [ 0.718103] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 0.722272] ata1.00: configured for UDMA/133 [ 0.722554] scsi 0:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5 [ 0.722899] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 0.722992] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.723303] sd 0:0:0:0: [sda] Write Protect is off [ 0.723387] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.723461] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.796839] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > [ 0.797853] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.822040] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 0.904178] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240) [ 0.904568] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities [ 0.917280] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 0.917414] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 0.917741] devtmpfs: mounted [ 0.919067] Freeing unused kernel memory: 1156k freed [ 0.919582] Write protecting the kernel read-only data: 12288k [ 0.924044] usb 5-2: new full-speed USB device number 2 using uhci_hcd [ 0.924314] Freeing unused kernel memory: 1264k freed [ 0.931701] Freeing unused kernel memory: 1780k freed [ 1.044036] usb 5-2: ep0 maxpacket = 8 [ 1.074809] usb 5-2: skipped 1 descriptor after interface [ 1.074817] usb 5-2: skipped 1 descriptor after interface [ 1.079808] usb 5-2: default language 0x0409 [ 1.095807] usb 5-2: udev 2, busnum 5, minor = 513 [ 1.095815] usb 5-2: New USB device found, idVendor=046d, idProduct=c049 [ 1.095900] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.095981] usb 5-2: Product: USB Gaming Mouse [ 1.096073] usb 5-2: Manufacturer: Logitech [ 1.096303] usb 5-2: usb_probe_device [ 1.096310] usb 5-2: configuration #1 chosen from 1 choice [ 1.101809] usb 5-2: adding 5-2:1.0 (config #1, interface 0) [ 1.101867] usbhid 5-2:1.0: usb_probe_interface [ 1.101873] usbhid 5-2:1.0: usb_probe_interface - got id [ 1.104171] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input11 [ 1.104510] hid-generic 0003:046D:C049.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1a.2-2/input0 [ 1.104680] usb 5-2: adding 5-2:1.1 (config #1, interface 1) [ 1.104723] usbhid 5-2:1.1: usb_probe_interface [ 1.104728] usbhid 5-2:1.1: usb_probe_interface - got id [ 1.108825] usbhid 5-2:1.1: looking for a minor, starting at 96 [ 1.108979] hid-generic 0003:046D:C049.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1a.2-2/input1 [ 1.109206] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 1.109222] ehci-pci 0000:00:1a.7: GetStatus port:6 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.109235] hub 1-0:1.0: port 6, status 0100, change 0001, 12 Mb/s [ 1.169027] tsc: Refined TSC clocksource calibration: 3008.967 MHz [ 1.169114] Switching to clocksource tsc [ 1.213034] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x100 [ 1.213050] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 1.213060] hub 1-0:1.0: hub_suspend [ 1.213070] usb usb1: bus auto-suspend, wakeup 1 [ 1.213074] ehci-pci 0000:00:1a.7: suspend root hub [ 2.202560] udevd[266]: starting version 1.10 [ 2.620340] udevd[317]: failed to execute '/usr/sbin/alsactl' '/usr/sbin/alsactl restore 0': No such file or directory [ 3.341997] nvidia: module license 'NVIDIA' taints kernel. [ 3.342027] Disabling lock debugging due to kernel taint [ 3.365659] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 3.365931] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.32 Tue Aug 5 20:58:26 PDT 2014 [ 4.581205] EXT4-fs (sda2): re-mounted. Opts: (null) [ 4.878701] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 4.954056] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 4.977291] XFS (sda7): Mounting Filesystem [ 5.212190] XFS (sda7): Ending clean mount [ 9.411238] uhci_hcd 0000:00:1a.2: reserve dev 2 ep81-INT, period 1, phase 0, 19 us [ 9.419798] uhci_hcd 0000:00:1a.2: release dev 2 ep81-INT, period 1, phase 0, 19 us [ 9.851718] atl1 0000:02:00.0: irq 45 for MSI/MSI-X [ 9.851857] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex [ 11.153068] ------------[ cut here ]------------ [ 11.153086] WARNING: at lib/dma-debug.c:937 check_unmap+0x46a/0x8c7() [ 11.153092] atl1 0000:02:00.0: DMA-API: device driver failed to check map error[device address=0x000000007b26f010] [size=32 bytes] [mapped as page] [ 11.153095] Modules linked in: [ 11.153099] nvidia(PO) [ 11.153105] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P O 3.10.30-gentoo #5 [ 11.153108] Hardware name: System manufacturer P5K SE/P5K SE, BIOS 1402 06/25/2009 [ 11.153112] 0000000000000009 ffff88007fc03c00 ffffffff816b1484 ffff88007fc03c40 [ 11.153119] ffffffff8103b67b ffff88007fc03c60 ffff88007c4e93c0 ffff88007d336820 [ 11.153125] ffffffff81eace00 ffffffff81992e15 0000000000000020 ffff88007fc03ca0 [ 11.153131] Call Trace: [ 11.153135] [] dump_stack+0x19/0x1b [ 11.153149] [] warn_slowpath_common+0x65/0x88 [ 11.153155] [] warn_slowpath_fmt+0x46/0x48 [ 11.153161] [] check_unmap+0x46a/0x8c7 [ 11.153168] [] ? ttwu_do_wakeup+0x1d/0xc8 [ 11.153174] [] debug_dma_unmap_page+0x5c/0x66 [ 11.153182] [] atl1_rings_clean+0x380/0x757 [ 11.153188] [] ? wakeme_after_rcu+0x12/0x14 [ 11.153196] [] net_rx_action+0x14b/0x22d [ 11.153203] [] __do_softirq+0xdf/0x20c [ 11.153210] [] call_softirq+0x1c/0x30 [ 11.153216] [] do_softirq+0x64/0x9e [ 11.153222] [] irq_exit+0x91/0xb0 [ 11.153228] [] do_IRQ+0x56/0xc0 [ 11.153235] [] common_interrupt+0x6f/0x6f [ 11.153238] [] ? default_idle+0x21/0xa8 [ 11.153248] [] ? default_idle+0x1f/0xa8 [ 11.153254] [] arch_cpu_idle+0x20/0x28 [ 11.153261] [] cpu_startup_entry+0xde/0x266 [ 11.153268] [] rest_init+0x72/0x74 [ 11.153275] [] start_kernel+0x3f1/0x3fe [ 11.153282] [] ? repair_env_string+0x5e/0x5e [ 11.153288] [] x86_64_start_reservations+0x2a/0x2c [ 11.153292] [] x86_64_start_kernel+0xce/0xd2 [ 11.153296] ---[ end trace d15c844865695ed1 ]--- [ 11.153298] Mapped at: [ 11.153301] [] debug_dma_map_page+0x87/0x146 [ 11.153306] [] atl1_xmit_frame+0x4b2/0xd2b [ 11.153311] [] dev_hard_start_xmit+0x30a/0x4c8 [ 11.153315] [] sch_direct_xmit+0xd3/0x19d [ 11.153320] [] dev_queue_xmit+0x1dc/0x42b [ 95.090428] nvidia 0000:01:00.0: irq 46 for MSI/MSI-X [ 97.168696] uhci_hcd 0000:00:1a.2: reserve dev 2 ep81-INT, period 1, phase 0, 19 us [ 796.598551] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.1-gentoo (root@localhost) (gcc version 4.8.2 (Gentoo 4.8.2 p1.3r1, pie-0.5.8r1) ) #1 SMP Fri Sep 5 12:52:31 MSK 2014 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.1-gentoo root=/dev/sda2 ro panic=7 nouveau.modeset=0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff7ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ff80000-0x000000007ff8dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ff8e000-0x000000007ffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: System manufacturer P5K SE/P5K SE, BIOS 1402 06/25/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7ff80 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01ed9000, 0x01ed9fff] PGTABLE [ 0.000000] BRK [0x01eda000, 0x01edafff] PGTABLE [ 0.000000] BRK [0x01edb000, 0x01edbfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff] [ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M [ 0.000000] BRK [0x01edc000, 0x01edcfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff] [ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x7bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ff7ffff] [ 0.000000] [mem 0x7fe00000-0x7ff7ffff] page 4k [ 0.000000] BRK [0x01edd000, 0x01eddfff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FBDD0 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 0x000000007FF80100 000054 (v01 A_M_I_ OEMXSDT 06000925 MSFT 00000097) [ 0.000000] ACPI: FACP 0x000000007FF80290 0000F4 (v03 A_M_I_ OEMFACP 06000925 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x000000007FF805C0 007EB9 (v01 A0807 A0807000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 0x000000007FF8E000 000040 [ 0.000000] ACPI: APIC 0x000000007FF80390 00006C (v01 A_M_I_ OEMAPIC 06000925 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x000000007FF80400 00003C (v01 A_M_I_ OEMMCFG 06000925 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x000000007FF8E040 000081 (v01 A_M_I_ AMI_OEM 06000925 MSFT 00000097) [ 0.000000] ACPI: HPET 0x000000007FF88480 000038 (v01 A_M_I_ OEMHPET 06000925 MSFT 00000097) [ 0.000000] ACPI: OSFR 0x000000007FF884C0 0000B0 (v01 A_M_I_ OEMOSFR 06000925 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x7ff7ffff] [ 0.000000] On node 0 totalpages: 524062 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7111 pages used for memmap [ 0.000000] DMA32 zone: 520064 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: 4 Processors exceeds NR_CPUS limit of 2 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s81408 r8192 d20992 u1048576 [ 0.000000] pcpu-alloc: s81408 r8192 d20992 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516874 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.1-gentoo root=/dev/sda2 ro panic=7 nouveau.modeset=0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 2048872K/2096248K available (6927K kernel code, 924K rwdata, 2524K rodata, 1192K init, 760K bss, 47376K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3009.027 MHz processor [ 0.001013] Calibrating delay loop (skipped), value calculated using timer frequency.. 6018.05 BogoMIPS (lpj=3009027) [ 0.001165] pid_max: default: 32768 minimum: 301 [ 0.001253] ACPI: Core revision 20140424 [ 0.009556] ACPI: All ACPI Tables successfully acquired [ 0.010075] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.010154] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.010621] Initializing cgroup subsys devices [ 0.010711] Initializing cgroup subsys freezer [ 0.011010] Initializing cgroup subsys blkio [ 0.011093] Initializing cgroup subsys perf_event [ 0.011193] Disabled fast string operations [ 0.011275] CPU: Physical Processor ID: 0 [ 0.011348] CPU: Processor Core ID: 0 [ 0.011421] mce: CPU supports 4 MCE banks [ 0.011506] CPU0: Thermal monitoring enabled (TM2) [ 0.011589] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0 tlb_flushall_shift: 6 [ 0.011847] Freeing SMP alternatives memory: 28K (ffffffff81e12000 - ffffffff81e19000) [ 0.012008] ftrace: allocating 27272 entries in 107 pages [ 0.022479] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.032764] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz (fam: 0f, model: 06, stepping: 05) [ 0.033000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.033000] ... version: 0 [ 0.033000] ... bit width: 40 [ 0.033000] ... generic registers: 18 [ 0.033000] ... value mask: 000000ffffffffff [ 0.033000] ... max period: 0000007fffffffff [ 0.033000] ... fixed-purpose events: 0 [ 0.033000] ... event mask: 000000000003ffff [ 0.034329] x86: Booting SMP configuration: [ 0.034405] .... node #0, CPUs: #1 [ 0.002000] Disabled fast string operations [ 0.046039] x86: Booted up 1 node, 2 CPUs [ 0.046259] smpboot: Total of 2 processors activated (12036.10 BogoMIPS) [ 0.048135] devtmpfs: initialized [ 0.049086] PM: Registering ACPI NVS region [mem 0x7ff8e000-0x7ffdffff] (335872 bytes) [ 0.050503] regulator-dummy: no parameters [ 0.050667] NET: Registered protocol family 16 [ 0.050975] cpuidle: using governor ladder [ 0.051007] cpuidle: using governor menu [ 0.051170] ACPI: bus type PCI registered [ 0.051363] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.051481] PCI: not using MMCONFIG [ 0.051555] PCI: Using configuration type 1 for base access [ 0.058096] ACPI: Added _OSI(Module Device) [ 0.058174] ACPI: Added _OSI(Processor Device) [ 0.058248] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.058323] ACPI: Added _OSI(Processor Aggregator Device) [ 0.062185] ACPI: Executed 1 blocks of module-level executable AML code [ 0.068133] ACPI: Dynamic OEM Table Load: [ 0.068276] ACPI: SSDT 0xFFFF88007D2B3200 0001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.069194] ACPI: Dynamic OEM Table Load: [ 0.069335] ACPI: SSDT 0xFFFF88007D2B3000 000143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.070200] ACPI: Interpreter enabled [ 0.070283] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) [ 0.070467] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 0.070668] ACPI: (supports S0 S3 S4 S5) [ 0.070744] ACPI: Using IOAPIC for interrupt routing [ 0.070854] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.071797] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.072347] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.082349] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.082435] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.082557] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.082942] PCI host bridge to bus 0000:00 [ 0.083006] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.083084] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.083161] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.083238] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.083315] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.083393] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff] [ 0.083482] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.083652] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.083715] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.083787] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.083972] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.084050] pci 0000:00:1a.0: reg 0x20: [io 0xc800-0xc81f] [ 0.084183] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.084338] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.084388] pci 0000:00:1a.1: reg 0x20: [io 0xc880-0xc89f] [ 0.084518] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.084675] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.084726] pci 0000:00:1a.2: reg 0x20: [io 0xcc00-0xcc1f] [ 0.084854] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.085026] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.085054] pci 0000:00:1a.7: reg 0x10: [mem 0xf9fffc00-0xf9ffffff] [ 0.085156] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.085229] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.085389] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.085410] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit] [ 0.085496] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.085636] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.085727] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.085800] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.085959] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.086054] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.086129] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.086285] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400 [ 0.086375] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.086449] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.086607] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.086657] pci 0000:00:1d.0: reg 0x20: [io 0xc080-0xc09f] [ 0.086789] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.086946] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.086996] pci 0000:00:1d.1: reg 0x20: [io 0xc400-0xc41f] [ 0.087128] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.087283] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.087333] pci 0000:00:1d.2: reg 0x20: [io 0xc480-0xc49f] [ 0.087459] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.087625] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.087651] pci 0000:00:1d.7: reg 0x10: [mem 0xf9fff800-0xf9fffbff] [ 0.087755] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.087831] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.087985] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.088109] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.088267] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.088357] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815] [ 0.088480] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.088560] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.088831] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018a [ 0.088852] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007] [ 0.088861] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003] [ 0.088871] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007] [ 0.088881] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003] [ 0.088890] pci 0000:00:1f.2: reg 0x20: [io 0xff90-0xff9f] [ 0.088900] pci 0000:00:1f.2: reg 0x24: [io 0xffa0-0xffaf] [ 0.088913] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.089005] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.089083] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.089160] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.090153] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.090173] pci 0000:00:1f.3: reg 0x10: [mem 0xf9fff400-0xf9fff4ff 64bit] [ 0.090197] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.090338] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185 [ 0.090358] pci 0000:00:1f.5: reg 0x10: [io 0xc000-0xc007] [ 0.090368] pci 0000:00:1f.5: reg 0x14: [io 0xbc00-0xbc03] [ 0.090378] pci 0000:00:1f.5: reg 0x18: [io 0xb880-0xb887] [ 0.090387] pci 0000:00:1f.5: reg 0x1c: [io 0xb800-0xb803] [ 0.090397] pci 0000:00:1f.5: reg 0x20: [io 0xb480-0xb48f] [ 0.090407] pci 0000:00:1f.5: reg 0x24: [io 0xb400-0xb40f] [ 0.090638] pci 0000:01:00.0: [10de:0614] type 00 class 0x030000 [ 0.090654] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.090670] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.090684] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.090694] pci 0000:01:00.0: reg 0x24: [io 0xdc00-0xdc7f] [ 0.090704] pci 0000:01:00.0: reg 0x30: [mem 0xfe9e0000-0xfe9fffff pref] [ 0.090834] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.090914] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.090919] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff] [ 0.090925] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.091011] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.091096] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.091194] pci 0000:03:00.0: [11ab:6121] type 00 class 0x01018f [ 0.091218] pci 0000:03:00.0: reg 0x10: [io 0xec00-0xec07] [ 0.091232] pci 0000:03:00.0: reg 0x14: [io 0xe880-0xe883] [ 0.091246] pci 0000:03:00.0: reg 0x18: [io 0xe800-0xe807] [ 0.091260] pci 0000:03:00.0: reg 0x1c: [io 0xe480-0xe483] [ 0.091274] pci 0000:03:00.0: reg 0x20: [io 0xe400-0xe40f] [ 0.091288] pci 0000:03:00.0: reg 0x24: [mem 0xfebffc00-0xfebfffff] [ 0.091366] pci 0000:03:00.0: supports D1 [ 0.091370] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.091464] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.091592] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.091672] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.091679] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.091784] pci 0000:02:00.0: [1969:1048] type 00 class 0x020000 [ 0.091815] pci 0000:02:00.0: reg 0x10: [mem 0xfeac0000-0xfeafffff 64bit] [ 0.091874] pci 0000:02:00.0: reg 0x30: [mem 0xfeaa0000-0xfeabffff pref] [ 0.091941] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.092041] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.092169] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.092251] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff] [ 0.092355] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.092443] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.092449] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.092452] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.092455] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.092459] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode) [ 0.092491] pci_bus 0000:00: on NUMA node 0 [ 0.093451] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12 14 15) [ 0.093968] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.094480] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.095046] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.095593] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.096197] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.096743] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.097321] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.097862] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.098103] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.098154] vgaarb: loaded [ 0.098227] vgaarb: bridge control possible 0000:01:00.0 [ 0.098463] SCSI subsystem initialized [ 0.098590] libata version 3.00 loaded. [ 0.098590] ACPI: bus type USB registered [ 0.098590] usbcore: registered new interface driver usbfs [ 0.099025] usbcore: registered new interface driver hub [ 0.099106] usbcore: registered new device driver usb [ 0.099216] Advanced Linux Sound Architecture Driver Initialized. [ 0.099216] PCI: Using ACPI for IRQ routing [ 0.105827] PCI: pci_cache_line_size set to 64 bytes [ 0.105897] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.105901] e820: reserve RAM buffer [mem 0x7ff80000-0x7fffffff] [ 0.106119] NET: Registered protocol family 8 [ 0.106194] NET: Registered protocol family 20 [ 0.106380] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.106462] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.106696] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.109028] Switched to clocksource hpet [ 0.125389] FS-Cache: Loaded [ 0.125576] CacheFiles: Loaded [ 0.129992] pnp: PnP ACPI init [ 0.130095] ACPI: bus type PNP registered [ 0.130293] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.130375] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.130499] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.130794] system 00:02: [io 0x0290-0x0297] has been reserved [ 0.130875] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.131165] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.131245] system 00:03: [io 0x0800-0x087f] could not be reserved [ 0.131322] system 00:03: [io 0x0480-0x04bf] has been reserved [ 0.131400] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.131477] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.131555] system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved [ 0.131632] system 00:03: [mem 0xffa00000-0xffafffff] has been reserved [ 0.131710] system 00:03: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.131787] system 00:03: [mem 0xffe00000-0xffefffff] has been reserved [ 0.131865] system 00:03: [mem 0xfff00000-0xfffffffe] has been reserved [ 0.131943] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.132348] pnp 00:04: [dma 0 disabled] [ 0.132462] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.132604] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.132685] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.132764] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.132874] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.132993] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.133084] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.133382] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.133463] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.133541] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.133619] system 00:08: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.133698] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.133920] pnp: PnP ACPI: found 9 devices [ 0.133995] ACPI: bus type PNP unregistered [ 0.138708] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.138714] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 [ 0.138726] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.138737] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.138741] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.138755] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment [ 0.138836] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 [ 0.138840] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.138844] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.138847] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.138851] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.138859] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff] [ 0.138941] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref] [ 0.139071] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref] [ 0.139190] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.139268] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff] [ 0.139348] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.139425] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.139504] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff] [ 0.139583] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.139701] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.139777] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.139858] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff] [ 0.139938] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.140065] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.140144] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.140225] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.140304] pci 0000:00:1c.4: bridge window [mem 0x80400000-0x805fffff 64bit pref] [ 0.140423] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.140500] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.140579] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff] [ 0.140658] pci 0000:00:1c.5: bridge window [mem 0x80600000-0x807fffff 64bit pref] [ 0.140777] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.140863] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.140866] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.140869] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.140872] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.140875] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff] [ 0.140878] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.140881] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe9fffff] [ 0.140884] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.140888] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.140891] pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff] [ 0.140894] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.140897] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.140900] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.140903] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref] [ 0.140906] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.140909] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.140912] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref] [ 0.140916] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.140919] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.140922] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.140925] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff] [ 0.140928] pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff] [ 0.141009] NET: Registered protocol family 2 [ 0.141403] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.141568] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.141732] TCP: Hash tables configured (established 16384 bind 16384) [ 0.141861] TCP: reno registered [ 0.141937] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.142038] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.142192] NET: Registered protocol family 1 [ 0.143922] pci 0000:01:00.0: Boot video device [ 0.143933] PCI: CLS 32 bytes, default 64 [ 0.156050] DMA-API: preallocated 65536 debug entries [ 0.156133] DMA-API: debugging enabled by kernel config [ 0.156469] Machine check injector initialized [ 0.156614] microcode: CPU0 sig=0xf65, pf=0x4, revision=0xb [ 0.156702] microcode: CPU1 sig=0xf65, pf=0x4, revision=0xb [ 0.156885] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.157328] Scanning for low memory corruption every 60 seconds [ 0.157574] sha1_ssse3: Neither AVX nor AVX2 nor SSSE3 is available/usable. [ 0.158068] futex hash table entries: 512 (order: 4, 65536 bytes) [ 0.158202] audit: initializing netlink subsys (disabled) [ 0.158311] audit: type=2000 audit(1412602268.157:1): initialized [ 0.158771] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.159401] DLM installed [ 0.159635] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.159813] ntfs: driver 2.1.30 [Flags: R/W DEBUG]. [ 0.159940] ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.160103] fuse init (API version 7.23) [ 0.160327] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 0.160720] msgmni has been set to 4001 [ 0.161663] NET: Registered protocol family 38 [ 0.161770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.161953] io scheduler noop registered [ 0.162106] io scheduler cfq registered (default) [ 0.162463] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.162544] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.162738] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.162937] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 0.163042] pcieport 0000:00:1c.5: enabling device (0106 -> 0107) [ 0.163235] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.190210] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 0.190332] Hangcheck: Using getrawmonotonic(). [ 0.193878] ipmi message handler version 39.2 [ 0.193962] ipmi device interface [ 0.194073] IPMI System Interface driver. [ 0.194226] ipmi_si: Unable to find any System Interface(s) [ 0.194308] IPMI Watchdog: driver initialized [ 0.194384] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 0.194634] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.194755] ACPI: Power Button [PWRB] [ 0.194910] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.195037] ACPI: Power Button [PWRF] [ 0.198589] brd: module loaded [ 0.198904] loop: module loaded [ 0.199274] ata_piix 0000:00:1f.2: version 2.13 [ 0.199418] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 0.200015] scsi0 : ata_piix [ 0.200284] scsi1 : ata_piix [ 0.200439] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14 [ 0.200519] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15 [ 0.200771] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.201352] scsi2 : ata_piix [ 0.201591] scsi3 : ata_piix [ 0.201747] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 22 [ 0.201828] ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 22 [ 0.202236] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.202341] platform physmap-flash.0: failed to claim resource 0 [ 0.202472] slram: not enough parameters. [ 0.202563] PPP generic driver version 2.4.2 [ 0.202714] PPP BSD Compression module registered [ 0.202791] PPP Deflate Compression module registered [ 0.202873] PPP MPPE Compression module registered [ 0.202951] NET: Registered protocol family 24 [ 0.203060] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.203140] ehci-pci: EHCI PCI platform driver [ 0.203367] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.203453] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.203585] ehci-pci 0000:00:1a.7: debug port 1 [ 0.207573] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 0.207596] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fffc00 [ 0.213031] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.213179] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.213259] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.213374] usb usb1: Product: EHCI Host Controller [ 0.213450] usb usb1: Manufacturer: Linux 3.16.1-gentoo ehci_hcd [ 0.213526] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.214592] hub 1-0:1.0: USB hub found [ 0.214679] hub 1-0:1.0: 6 ports detected [ 0.215149] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.215234] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.215363] ehci-pci 0000:00:1d.7: debug port 1 [ 0.219353] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 0.219375] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800 [ 0.225032] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.225168] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.225246] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.225361] usb usb2: Product: EHCI Host Controller [ 0.225436] usb usb2: Manufacturer: Linux 3.16.1-gentoo ehci_hcd [ 0.225512] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.225783] hub 2-0:1.0: USB hub found [ 0.225866] hub 2-0:1.0: 6 ports detected [ 0.226227] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.226314] ohci-pci: OHCI PCI platform driver [ 0.226413] uhci_hcd: USB Universal Host Controller Interface driver [ 0.226623] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.226707] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.226859] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800 [ 0.227043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.227122] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.227236] usb usb3: Product: UHCI Host Controller [ 0.227311] usb usb3: Manufacturer: Linux 3.16.1-gentoo uhci_hcd [ 0.227387] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.227656] hub 3-0:1.0: USB hub found [ 0.227740] hub 3-0:1.0: 2 ports detected [ 0.228128] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.228212] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.228365] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880 [ 0.228532] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.228611] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.228726] usb usb4: Product: UHCI Host Controller [ 0.228801] usb usb4: Manufacturer: Linux 3.16.1-gentoo uhci_hcd [ 0.228878] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.229157] hub 4-0:1.0: USB hub found [ 0.229241] hub 4-0:1.0: 2 ports detected [ 0.229578] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.229662] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.229801] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00 [ 0.229967] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.230061] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.230176] usb usb5: Product: UHCI Host Controller [ 0.230251] usb usb5: Manufacturer: Linux 3.16.1-gentoo uhci_hcd [ 0.230327] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.230596] hub 5-0:1.0: USB hub found [ 0.230680] hub 5-0:1.0: 2 ports detected [ 0.231038] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.231122] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.231264] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080 [ 0.231426] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.231506] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.231621] usb usb6: Product: UHCI Host Controller [ 0.231697] usb usb6: Manufacturer: Linux 3.16.1-gentoo uhci_hcd [ 0.231773] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.232054] hub 6-0:1.0: USB hub found [ 0.232139] hub 6-0:1.0: 2 ports detected [ 0.232478] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.232562] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.232714] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400 [ 0.232880] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.232959] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.233093] usb usb7: Product: UHCI Host Controller [ 0.233171] usb usb7: Manufacturer: Linux 3.16.1-gentoo uhci_hcd [ 0.233248] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.233521] hub 7-0:1.0: USB hub found [ 0.233606] hub 7-0:1.0: 2 ports detected [ 0.233948] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.234046] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.234187] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480 [ 0.234349] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.234429] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.234543] usb usb8: Product: UHCI Host Controller [ 0.234618] usb usb8: Manufacturer: Linux 3.16.1-gentoo uhci_hcd [ 0.234694] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.234956] hub 8-0:1.0: USB hub found [ 0.235059] hub 8-0:1.0: 2 ports detected [ 0.235399] usbcore: registered new interface driver usb-storage [ 0.235497] usbcore: registered new interface driver ums-cypress [ 0.235593] usbcore: registered new interface driver ums-datafab [ 0.235741] usbcore: registered new interface driver usbserial [ 0.235833] usbcore: registered new interface driver usbserial_generic [ 0.235923] usbserial: USB Serial support registered for generic [ 0.236039] usbcore: registered new interface driver usblcd [ 0.236146] usbcore: registered new interface driver ldusb [ 0.236245] usbcore: registered new interface driver usbled [ 0.236398] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.236476] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.237126] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.237442] mousedev: PS/2 mouse device common for all mice [ 0.237778] rtc_cmos 00:01: RTC can wake from S4 [ 0.238057] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.238162] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.238295] i2c /dev entries driver [ 0.238546] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041f conflicts with OpRegion 0x0000000000000400-0x000000000000040f (\SMRG) (20140424/utaddress-258) [ 0.238776] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.239670] intel_powerclamp: Intel powerclamp does not run on family 15 model 6 [ 0.239814] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 0.240042] wafer5823wdt: initialized. timeout=60 sec (nowayout=0) [ 0.240148] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 0.240252] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860) [ 0.240355] watchdog: iTCO_wdt: cannot register miscdev on minor=130 (err=-16). [ 0.240469] watchdog: iTCO_wdt: a legacy watchdog module is probably present. [ 0.240606] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 0.240698] iTCO_vendor_support: vendor-support=0 [ 0.240819] leds_ss4200: no LED devices found [ 0.241633] hidraw: raw HID events driver (C) Jiri Kosina [ 0.241775] usbcore: registered new interface driver usbhid [ 0.241852] usbhid: USB HID core driver [ 0.242485] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 0.242694] ipip: IPv4 over IPv4 tunneling driver [ 0.242992] TCP: bic registered [ 0.243101] TCP: cubic registered [ 0.243179] TCP: westwood registered [ 0.243254] TCP: htcp registered [ 0.243328] Initializing XFRM netlink socket [ 0.243415] NET: Registered protocol family 17 [ 0.243503] NET: Registered protocol family 15 [ 0.243619] NET: Registered protocol family 33 [ 0.243696] Key type rxrpc registered [ 0.243771] Key type rxrpc_s registered [ 0.243877] l2tp_core: L2TP core driver, V2.0 [ 0.243962] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 0.246381] DCCP: Activated CCID 2 (TCP-like) [ 0.246478] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) [ 0.247507] sctp: Hash tables configured (established 65536 bind 65536) [ 0.251063] console [netcon0] enabled [ 0.251145] netconsole: network logging started [ 0.251270] rtc_cmos 00:01: setting system clock to 2014-10-06 13:31:08 UTC (1412602268) [ 0.252187] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.252270] EDD information not available. [ 0.252331] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 0.252340] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 0.252348] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 0.252352] sound hdaudioC0D0: mono: mono_out=0x0 [ 0.252357] sound hdaudioC0D0: dig-out=0x1e/0x0 [ 0.252364] sound hdaudioC0D0: inputs: [ 0.252368] sound hdaudioC0D0: Front Mic=0x19 [ 0.252371] sound hdaudioC0D0: Rear Mic=0x18 [ 0.252373] sound hdaudioC0D0: Line=0x1a [ 0.253200] ALSA device list: [ 0.253279] No soundcards found. [ 0.265917] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3 [ 0.266172] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 0.266417] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 0.266671] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 0.266912] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 0.267159] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 0.267397] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 0.267634] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 0.274818] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.516902] ata3: SATA link down (SStatus 0 SControl 300) [ 0.527737] ata2: SATA link down (SStatus 0 SControl 300) [ 0.527876] ata4: SATA link down (SStatus 0 SControl 300) [ 0.656073] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.659288] ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133 [ 0.659370] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.665288] ata1.00: configured for UDMA/133 [ 0.665569] scsi 0:0:0:0: Direct-Access ATA ST3250410AS C PQ: 0 ANSI: 5 [ 0.666181] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.666185] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 0.666412] sd 0:0:0:0: [sda] Write Protect is off [ 0.666499] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.666597] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.739974] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > [ 0.741189] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.764048] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240) [ 0.764432] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities [ 0.777170] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 0.777302] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 0.777606] devtmpfs: mounted [ 0.779437] Freeing unused kernel memory: 1192K (ffffffff81ce8000 - ffffffff81e12000) [ 0.779557] Write protecting the kernel read-only data: 12288k [ 0.784996] Freeing unused kernel memory: 1252K (ffff8800016c7000 - ffff880001800000) [ 0.792306] Freeing unused kernel memory: 1572K (ffff880001a77000 - ffff880001c00000) [ 0.890060] usb 5-2: new full-speed USB device number 2 using uhci_hcd [ 1.063069] usb 5-2: New USB device found, idVendor=046d, idProduct=c049 [ 1.063158] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.063239] usb 5-2: Product: USB Gaming Mouse [ 1.063317] usb 5-2: Manufacturer: Logitech [ 1.071627] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:046D:C049.0001/input/input11 [ 1.072022] hid-generic 0003:046D:C049.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1a.2-2/input0 [ 1.076241] hid-generic 0003:046D:C049.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1a.2-2/input1 [ 1.159034] tsc: Refined TSC clocksource calibration: 3008.966 MHz [ 1.225335] random: nonblocking pool is initialized [ 2.129442] udevd[267]: starting version 1.10 [ 2.159209] Switched to clocksource tsc [ 2.507805] udevd[295]: failed to execute '/usr/sbin/alsactl' '/usr/sbin/alsactl restore 0': No such file or directory [ 2.559684] [drm] Initialized drm 1.1.0 20060810 [ 2.648407] atl1 0000:02:00.0: version 2.1.3 [ 2.807444] wmi: Mapper loaded [ 4.196998] EXT4-fs (sda2): re-mounted. Opts: (null) [ 4.505345] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 4.580654] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 4.612218] XFS (sda7): Mounting V4 Filesystem [ 4.705521] XFS (sda7): Ending clean mount [ 9.618863] atl1 0000:02:00.0: irq 45 for MSI/MSI-X [ 9.618948] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex [ 10.906071] ------------[ cut here ]------------ [ 10.906088] WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1140 check_unmap+0x503/0xa15() [ 10.906095] atl1 0000:02:00.0: DMA-API: device driver failed to check map error[device address=0x000000007afbb210] [size=32 bytes] [mapped as page] [ 10.906099] Modules linked in: [ 10.906102] nouveau cfbfillrect cfbimgblt wmi cfbcopyarea i2c_algo_bit ttm atl1 drm_kms_helper mii drm [ 10.906120] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.1-gentoo #1 [ 10.906123] Hardware name: System manufacturer P5K SE/P5K SE, BIOS 1402 06/25/2009 [ 10.906126] 0000000000000009 ffff88007fc03c88 ffffffff816b9856 ffff88007fc03cd0 [ 10.906133] ffff88007fc03cc0 ffffffff81049894 ffff88007c981d00 ffff88007d3dd7c0 [ 10.906139] ffffffff81ebe310 0000000000000202 ffffffff8199f570 ffff88007fc03d20 [ 10.906145] Call Trace: [ 10.906148] [] dump_stack+0x45/0x56 [ 10.906162] [] warn_slowpath_common+0x7d/0x97 [ 10.906167] [] warn_slowpath_fmt+0x4c/0x4e [ 10.906173] [] check_unmap+0x503/0xa15 [ 10.906178] [] debug_dma_unmap_page+0x5f/0x65 [ 10.906187] [] atl1_rings_clean+0x362/0x72f [atl1] [ 10.906194] [] net_rx_action+0x14a/0x22a [ 10.906200] [] __do_softirq+0x10b/0x2ac [ 10.906205] [] irq_exit+0x8f/0xa5 [ 10.906211] [] do_IRQ+0x58/0xe0 [ 10.906217] [] common_interrupt+0x6f/0x6f [ 10.906219] [] ? retint_restore_args+0xe/0xe [ 10.906231] [] ? default_idle+0x21/0xa4 [ 10.906236] [] ? default_idle+0x1f/0xa4 [ 10.906241] [] arch_cpu_idle+0xf/0x11 [ 10.906248] [] cpu_startup_entry+0x2eb/0x3ea [ 10.906254] [] rest_init+0x72/0x74 [ 10.906260] [] start_kernel+0x36d/0x37a [ 10.906265] [] ? set_init_arg+0x53/0x53 [ 10.906270] [] x86_64_start_reservations+0x2a/0x2c [ 10.906275] [] x86_64_start_kernel+0xf1/0xf4 [ 10.906278] ---[ end trace f6b09f024fccd5d5 ]--- [ 10.906280] Mapped at: [ 10.906283] [] debug_dma_map_page+0x88/0x147 [ 10.906288] [] atl1_xmit_frame+0x354/0xcde [atl1] [ 10.906294] [] dev_hard_start_xmit+0x2e3/0x561 [ 10.906298] [] sch_direct_xmit+0xd3/0x1a0 [ 10.906303] [] __dev_queue_xmit+0x1d5/0x456 [ 89.736245] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 89.736254] Copyright (c) 2007 Atheros Corporation. [ 263.110533] atl1 0000:02:00.0: version 2.1.3 [ 273.041564] atl1 0000:02:00.0: irq 45 for MSI/MSI-X [ 273.041649] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex [ 875.350334] nvidia: module license 'NVIDIA' taints kernel. [ 875.350342] Disabling lock debugging due to kernel taint [ 875.372029] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 875.372474] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0 [ 875.372488] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.32 Tue Aug 5 20:58:26 PDT 2014 [ 875.420046] nvidia 0000:01:00.0: irq 46 for MSI/MSI-X [ 885.335386] nvidia 0000:01:00.0: irq 46 for MSI/MSI-X