rc.log

rc.log.txt (text/plain), 6.39 KB, created by Norman Back on 2014-09-02 10:51:09 UTC

rc sysinit logging started at Tue Sep  2 11:09:26 2014


   OpenRC 0.12.4 is starting up Gentoo Linux (x86_64)

 * /proc is already mounted
 * /run/openrc: creating directory
 * /run/lock: correcting mode
 * /run/lock: correcting owner
 * Using /dev mounted from kernel ...
 [ ok ]
 * Mounting /dev/mqueue ...
 [ ok ]
 * Creating list of required static device nodes for the current kernel ...
 [ ok ]
 * Mounting security filesystem ...
 [ ok ]
 * Mounting debug filesystem ...
 [ ok ]
 * Mounting cgroup filesystem ...
 [ ok ]
 * setting up tmpfiles.d entries for /dev ...
 [ ok ]
 * Starting udev ...
 [ ok ]
 * Generating a rule to create a /dev/root symlink ...
 [ ok ]
 * Populating /dev with existing devices through uevents ...
 [ ok ]
 * Waiting for uevents to be processed ...
 [ ok ]

rc sysinit logging stopped at Tue Sep  2 11:09:26 2014


rc boot logging started at Tue Sep  2 11:09:26 2014

 * Setting system clock using the hardware clock [Local Time] ...
 [ ok ]
 * Loading module rtc-cmos ...
 [ ok ]
 * Loading module vboxdrv ...
 [ ok ]
 * Loading module vboxnetflt ...
 [ ok ]
 * Loading module vboxnetadp ...
 [ ok ]
 * Loading module r8169 ...
 [ ok ]
 * Loading module sg ...
 [ ok ]
 * Autoloaded 6 module(s)
 * Starting lvmetad ...
 [ ok ]
 * Setting up the Logical Volume Manager ...
  /run/lvm/lvmetad.socket: connect failed: No such file or directory
  WARNING: Failed to connect to lvmetad. Falling back to internal scanning.
 [ ok ]
 * Checking local filesystems  ...
OPT-SDC3: clean, 7492/393216 files, 487690/1572864 blocks
USR.SRC-SDC3: clean, 194159/1179648 files, 872062/2359296 blocks
VAR.TMP-SDC3: clean, 2988/262144 files, 146328/524288 blocks
VAR.LOG-SDC3: clean, 265/262144 files, 102045/524288 blocks
BOOT.SDC8: clean, 84/32768 files, 54955/131072 blocks
TMP.PORTAGE.SDA1: clean, 13/1310720 files, 126291/5242880 blocks
TMP.SDA11: clean, 20/1310720 files, 126305/5242880 blocks
H.NORMAN.SDB7: clean, 253108/2621440 files, 5687569/10485760 blocks
 [ ok ]
 * Remounting root filesystem read/write ...
 [ ok ]
 * Remounting filesystems ...
 [ ok ]
 * Updating /etc/mtab ...
 [ ok ]
 * Activating swap devices ...
 [ ok ]
 * Mounting local filesystems ...
 [ ok ]
 * Configuring kernel parameters ...
 [ ok ]
 * Creating user login records ...
 [ ok ]
 * Wiping /tmp directory ...
 [ ok ]
 * Restoring Mixer Levels ...
alsactl: set_control:1325: failed to obtain info for control #65 (No such file or directory)
 [ ok ]
 * Setting terminal encoding [UTF-8] ...
 [ ok ]
 * Setting console font [default8x16] ...
 [ ok ]
 * Starting dmeventd ...
 [ ok ]
 * Setting hostname to diamond ...
 [ ok ]
 * Setting keyboard mode [UTF-8] ...
 [ ok ]
 * Loading key mappings [uk] ...
 [ ok ]
 * Bringing up network interface lo ...
 [ ok ]
 * Bringing up interface lo
 *   127.0.0.1/8 ...
 [ ok ]
 *   Adding routes
 *     127.0.0.0/8 via 127.0.0.1 ...
 [ ok ]
 * Mounting misc binary format filesystem ...
 [ ok ]
 * Loading custom binary format handlers ...
 [ ok ]
 * Activating additional swap space ...
 [ ok ]
 * setting up tmpfiles.d entries ...
 [ ok ]
 * Initializing random number generator ...
 [ ok ]

rc boot logging stopped at Tue Sep  2 10:09:39 2014


rc default logging started at Tue Sep  2 10:09:39 2014

 * Starting lvmetad ...
 [ ok ]
 * Checking your configfile (/etc/syslog-ng/syslog-ng.conf) ...
 [ ok ]
 * Starting syslog-ng ...
 [ ok ]
 * Starting acpid ...
 [ ok ]
 * Starting D-BUS system messagebus ...
 [ ok ]
 * Starting ConsoleKit daemon ...
 [ ok ]
 * Bringing up interface br0
 *   Creating bridge br0 ...
 *   Adding ports to br0
 *     lan0 ...
 [ ok ]
 *   XXX.XXX.XXX.XXX/24..
 [ ok ]
 *   XXXX:XXXX:XXXX:XXXX:XXXX:XXXX/64
 [ ok ]
 *   Adding routes
 *     default via XXX.XXX.XXX.1 ...
 [ ok ]
 *     default via XXXX:XXXX:XXXX:XXXX:XXXX:1 ...
 [ ok ]
 *   Waiting for IPv6 addresses ...
 [ ok ]
 * Starting rpcbind ...
 [ ok ]
 * Starting NFS statd ...
 [ ok ]
 * Setting up RPC pipefs ...
 [ ok ]
 * Starting idmapd ...
 [ ok ]
 * Starting cupsd ...
 [ ok ]
 * Mounting nfsd filesystem in /proc ...
 [ ok ]
 * Exporting NFS directories ...
 [ ok ]
 * Starting NFS mountd ...
 [ ok ]
 * Starting NFS daemon ...
 [ ok ]
 * Starting NFS smnotify ...
 [ ok ]
 * Starting automounter ...
 [ ok ]
 * Mounting network filesystems ...
 [ ok ]
 * Starting gpm ...
 [ ok ]
 * Setting up kdm ...
 [ ok ]
 * Starting mysql ...
 [ ok ]
 * Starting sshd ...
 [ ok ]
 * Starting apache2 ...
 [ ok ]
 * Starting bluetooth ...
 [ ok ]
 * Starting distccd ...
 [ ok ]
 * Starting hddtemp daemon ...
 [ ok ]
 * Loading lm_sensors modules...
 *   Loading w83627ehf ...
 [ ok ]
 * Initializing sensors ...
 [ ok ]
 * Starting LVM monitoring for VGs   syssda10 syssda12 syssdb6 syssdb8 syssdb9 syssdc1 syssdc3 syssdc6 syssdc7 vgsda11 vgsdb10 vgsdb7 vgsdc10 vgsdc2: ...
  6 logical volume(s) in volume group "syssda10" monitored
  6 logical volume(s) in volume group "syssda12" monitored
  6 logical volume(s) in volume group "syssdb6" monitored
  6 logical volume(s) in volume group "syssdb8" monitored
  6 logical volume(s) in volume group "syssdb9" monitored
  6 logical volume(s) in volume group "syssdc1" monitored
  6 logical volume(s) in volume group "syssdc3" monitored
  6 logical volume(s) in volume group "syssdc6" monitored
  6 logical volume(s) in volume group "syssdc7" monitored
  4 logical volume(s) in volume group "vgsda11" monitored
  12 logical volume(s) in volume group "vgsdb10" monitored
  2 logical volume(s) in volume group "vgsdb7" monitored
  2 logical volume(s) in volume group "vgsdc10" monitored
  1 logical volume(s) in volume group "vgsdc2" monitored
 [ ok ]
 * Starting monitorix ...
 [ ok ]
 * Starting NFS sm-notify ...
 [ ok ]
 * Mounting NFS filesystems ...
 [ ok ]
 * Starting ntpd ...
 [ ok ]
 * Starting saslauthd ...
 [ ok ]
 * Starting postfix  ...
 [ ok ]
 * Starting powernowd ...
powernowd: PowerNow Daemon v1.00, (c) 2003-2008 John Clemens
powernowd: Found 4 scalable units:  -- 1 'CPU' per scalable unit
powernowd:   cpu0: 800Mhz - 3400Mhz (4 steps)
powernowd:   cpu1: 800Mhz - 3400Mhz (4 steps)
powernowd:   cpu2: 800Mhz - 3400Mhz (4 steps)
powernowd:   cpu3: 800Mhz - 3400Mhz (4 steps)
 [ ok ]
 * samba -> start: smbd ...
 [ ok ]
 * samba -> start: nmbd ...
 [ ok ]
 * Starting S.M.A.R.T. monitoring daemon ...
 [ ok ]
 * Starting VirtualBox WebService ...
 [ ok ]
 * Starting vixie-cron ...
 [ ok ]
 * Starting xinetd ...
 [ ok ]
 * Starting local
 * grub-set-default ...
 [ ok ]
 [ ok ]

rc default logging stopped at Tue Sep  2 10:10:05 2014