* Package: sys-apps/systemd-215-r3  * Repository: gentoo  * Maintainer: systemd@gentoo.org  * USE: abi_x86_32 abi_x86_64 acl amd64 elibc_glibc filecaps firmware-loader gudev introspection kernel_linux kmod lzma pam policykit python_single_target_python2_7 python_targets_python2_7 python_targets_python3_3 seccomp userland_GNU  * FEATURES: preserve-libs sandbox userpriv usersandbox >>> Unpacking source... >>> Unpacking systemd-215.tar.xz to /var/tmp/portage/sys-apps/systemd-215-r3/work >>> Source unpacked in /var/tmp/portage/sys-apps/systemd-215-r3/work >>> Preparing source in /var/tmp/portage/sys-apps/systemd-215-r3/work/systemd-215 ... * Applying 215-0001-always-check-for-__BYTE_ORDER-__BIG_ENDIAN-when-chec.patch ...  [ ok ] * Applying 215-0002-endian-explicitly-include-endian.h-wherever-we-want-.patch ...  [ ok ] * Applying 215-0003-udev-exclude-MD-from-block-device-ownership-event-lo.patch ...  [ ok ] * Running elibtoolize in: systemd-215/ * Applying target-nm/2.4.2 patch ... * Running elibtoolize in: systemd-215/build-aux/ * Applying portage/1.2.0 patch ... * Applying sed/1.5.6 patch ... * Applying as-needed/2.4.2 patch ... >>> Source prepared. >>> Configuring source in /var/tmp/portage/sys-apps/systemd-215-r3/work/systemd-215 ... * abi_x86_32.x86: running multilib-minimal_abi_src_configure * abi_x86_64.amd64: running multilib-minimal_abi_src_configure >>> Working in BUILD_DIR: "/var/tmp/portage/sys-apps/systemd-215-r3/work/systemd-215-abi_x86_32.x86" >>> Working in BUILD_DIR: "/var/tmp/portage/sys-apps/systemd-215-r3/work/systemd-215-abi_x86_64.amd64" * econf: updating systemd-215/build-aux/config.sub with /usr/share/gnuconfig/config.sub * econf: updating systemd-215/build-aux/config.guess with /usr/share/gnuconfig/config.guess * econf: updating systemd-215/build-aux/config.guess with /usr/share/gnuconfig/config.guess * econf: updating systemd-215/build-aux/config.sub with /usr/share/gnuconfig/config.sub /var/tmp/portage/sys-apps/systemd-215-r3/work/systemd-215/configure --prefix=/usr --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib32 --disable-silent-rules --disable-dependency-tracking --docdir=/usr/share/doc/systemd-215-r3 cc_cv_CFLAGS__flto=no --enable-dependency-tracking --disable-maintainer-mode --localstatedir=/var --with-pamlibdir=/lib32/security --with-bashcompletiondir=/usr/share/bash-completion --enable-split-usr --with-sysvinit-path= --with-sysvrcnd-path= --enable-efi --enable-ima --disable-acl --disable-audit --disable-libcryptsetup --disable-gtk-doc --disable-elfutils --disable-gcrypt --enable-gudev --disable-microhttpd --disable-gnutls --disable-introspection --disable-kdbus --disable-kmod --enable-xz --disable-pam --disable-polkit --without-python --disable-python-devel --disable-qrencode --disable-seccomp --disable-selinux --disable-tests --disable-dbus --disable-backlight --disable-binfmt --disable-bootchart --disable-coredump --disable-hostnamed --disable-localed --disable-logind --disable-machined --disable-networkd --disable-quotacheck --disable-randomseed --disable-readahead --disable-resolved --disable-rfkill --disable-sysusers --disable-timedated --disable-timesyncd --disable-tmpfiles --disable-vconsole --disable-apparmor --disable-chkconfig QUOTAON=/usr/sbin/quotaon QUOTACHECK=/usr/sbin/quotacheck --with-dbuspolicydir=/etc/dbus-1/system.d --with-dbussessionservicedir=/usr/share/dbus-1/services --with-dbussystemservicedir=/usr/share/dbus-1/system-services --with-dbusinterfacedir=/usr/share/dbus-1/interfaces --with-ntp-servers=0.gentoo.pool.ntp.org 1.gentoo.pool.ntp.org 2.gentoo.pool.ntp.org 3.gentoo.pool.ntp.org --with-firmware-path=/lib/firmware/updates:/lib/firmware ac_cv_search_cap_init= ac_cv_header_sys_capability_h=yes /var/tmp/portage/sys-apps/systemd-215-r3/work/systemd-215/configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --disable-silent-rules --disable-dependency-tracking --docdir=/usr/share/doc/systemd-215-r3 cc_cv_CFLAGS__flto=no --enable-dependency-tracking --disable-maintainer-mode --localstatedir=/var --with-pamlibdir=/lib64/security --with-bashcompletiondir=/usr/share/bash-completion --enable-split-usr --with-sysvinit-path= --with-sysvrcnd-path= --enable-efi --enable-ima --enable-acl --disable-audit --disable-libcryptsetup --disable-gtk-doc --disable-elfutils --disable-gcrypt --enable-gudev --disable-microhttpd --disable-gnutls --enable-introspection --disable-kdbus --enable-kmod --enable-xz --enable-pam --enable-polkit --without-python --disable-python-devel --disable-qrencode --enable-seccomp --disable-selinux --disable-tests --disable-dbus --enable-backlight --enable-binfmt --enable-bootchart --enable-coredump --enable-hostnamed --enable-localed --enable-logind --enable-machined --enable-networkd --enable-quotacheck --enable-randomseed --enable-readahead --enable-resolved --enable-rfkill --enable-sysusers --enable-timedated --enable-timesyncd --enable-tmpfiles --enable-vconsole --disable-apparmor --disable-chkconfig QUOTAON=/usr/sbin/quotaon QUOTACHECK=/usr/sbin/quotacheck --with-dbuspolicydir=/etc/dbus-1/system.d --with-dbussessionservicedir=/usr/share/dbus-1/services --with-dbussystemservicedir=/usr/share/dbus-1/system-services --with-dbusinterfacedir=/usr/share/dbus-1/interfaces --with-ntp-servers=0.gentoo.pool.ntp.org 1.gentoo.pool.ntp.org 2.gentoo.pool.ntp.org 3.gentoo.pool.ntp.org --with-firmware-path=/lib/firmware/updates:/lib/firmware configure: loading site script /usr/share/config.site checking for i686-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc -m32 checking whether the C compiler works... configure: loading site script /usr/share/config.site checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether the C compiler works... checking whether we are cross compiling... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... no checking for suffix of object files... yes checking whether x86_64-pc-linux-gnu-gcc -m32 accepts -g... o checking whether we are using the GNU C compiler... yes checking for x86_64-pc-linux-gnu-gcc -m32 option to accept ISO C89... yes checking whether x86_64-pc-linux-gnu-gcc accepts -g... none needed checking how to run the C preprocessor... yes checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89... x86_64-pc-linux-gnu-gcc -m32 -E none needed checking how to run the C preprocessor... checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... x86_64-pc-linux-gnu-gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for stdlib.h... yes checking for sys/stat.h... yes checking for string.h... yes checking for stdlib.h... yes yes checking for string.h... checking for memory.h... yes yes checking for memory.h... checking for strings.h... yes yes checking for strings.h... checking for inttypes.h... yes yes checking for stdint.h... checking for inttypes.h... yes yes checking for unistd.h... checking for stdint.h... yes yes checking minix/config.h usability... checking for unistd.h... no checking minix/config.h presence... yes checking minix/config.h usability... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... 64 checking whether to enable maintainer-specific portions of Makefiles... no checking for a BSD-compatible install... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking whether to enable maintainer-specific portions of Makefiles... no checking for a BSD-compatible install... /usr/lib64/portage/bin/ebuild-helpers/xattr/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking whether make supports nested variables... yes /usr/lib64/portage/bin/ebuild-helpers/xattr/install -c checking whether build environment is sane... yes checking how to create a pax tar archive... checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... gnutar checking dependency style of x86_64-pc-linux-gnu-gcc -m32... yes checking for style of include used by make... GNU checking whether make supports nested variables... yes checking how to create a pax tar archive... gcc3 checking whether make supports nested variables... (cached) yes gnutar checking dependency style of x86_64-pc-linux-gnu-gcc... checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... gcc3 checking whether make supports nested variables... (cached) yes /bin/grep -F checking for ld used by x86_64-pc-linux-gnu-gcc -m32... checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu-ld -m elf_i386 checking if the linker (x86_64-pc-linux-gnu-ld -m elf_i386) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by x86_64-pc-linux-gnu-gcc... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for x86_64-pc-linux-gnu-ld -m elf_i386 option to reload object files... -r checking for i686-pc-linux-gnu-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for i686-pc-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for i686-pc-linux-gnu-ar... no checking for ar... ar checking for archiver @FILE support... /usr/x86_64-pc-linux-gnu/bin/ld checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-pc-linux-gnu-nm -B checking the name lister (/usr/bin/x86_64-pc-linux-gnu-nm -B) interface... @ checking for i686-pc-linux-gnu-strip... no checking for strip... strip checking for i686-pc-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from x86_64-pc-linux-gnu-gcc -m32 object... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/x86_64-pc-linux-gnu/bin/ld option to reload object files... -r checking for x86_64-pc-linux-gnu-objdump... x86_64-pc-linux-gnu-objdump checking how to recognize dependent libraries... pass_all checking for x86_64-pc-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar checking for archiver @FILE support... ok @ checking for sysroot... no checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib checking command to parse /usr/bin/x86_64-pc-linux-gnu-nm -B output from x86_64-pc-linux-gnu-gcc object... checking for i686-pc-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs ok checking for sysroot... no checking for x86_64-pc-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... checking if x86_64-pc-linux-gnu-gcc -m32 supports -fno-rtti -fno-exceptions... no checking for x86_64-pc-linux-gnu-gcc -m32 option to produce PIC... -fPIC -DPIC checking if x86_64-pc-linux-gnu-gcc -m32 PIC flag -fPIC -DPIC works... yes checking for objdir... .libs yes checking if x86_64-pc-linux-gnu-gcc -m32 static flag -static works... checking if x86_64-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... yes checking if x86_64-pc-linux-gnu-gcc -m32 supports -c -o file.o... no checking for x86_64-pc-linux-gnu-gcc option to produce PIC... -fPIC -DPIC checking if x86_64-pc-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes checking if x86_64-pc-linux-gnu-gcc -m32 supports -c -o file.o... (cached) yes checking whether the x86_64-pc-linux-gnu-gcc -m32 linker (x86_64-pc-linux-gnu-ld -m elf_i386) supports shared libraries... yes checking if x86_64-pc-linux-gnu-gcc static flag -static works... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... yes checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... yes checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... (cached) yes checking whether the x86_64-pc-linux-gnu-gcc linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for intltool-merge... yes checking whether NLS is requested... yes no checking dynamic linker characteristics... checking for intltool >= 0.40.0... 0.50.2 found checking for intltool-update... /usr/bin/intltool-update checking for intltool-merge... /usr/bin/intltool-merge checking for intltool-extract... /usr/bin/intltool-extract checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/gmsgfmt checking for perl... /usr/bin/perl checking for perl >= 5.8.1... 5.18.2 checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for intltool-merge... yes checking whether NLS is requested... yes !!! Please attach the following file when seeking support: !!! /var/tmp/portage/sys-apps/systemd-215-r3/work/systemd-215-abi_x86_32.x86/config.log * ERROR: sys-apps/systemd-215-r3::gentoo failed (configure phase): * econf failed * checking for intltool >= 0.40.0... 0.50.2 found checking for intltool-update... /usr/bin/intltool-update checking for intltool-merge... /usr/bin/intltool-merge checking for intltool-extract... /usr/bin/intltool-extract checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/gmsgfmt * Call stack: * ebuild.sh, line 93: Called src_configure checking for perl... /usr/bin/perl checking for perl >= 5.8.1... 5.18.2 checking for XML::Parser... * environment, line 6103: Called multilib-minimal_src_configure configure: error: XML::Parser perl module is required for intltool * environment, line 4360: Called multilib_parallel_foreach_abi 'multilib-minimal_abi_src_configure' * environment, line 4658: Called multibuild_parallel_foreach_variant '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure' * environment, line 4253: Called multibuild_foreach_variant '_multibuild_parallel' '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure' * environment, line 4196: Called _multibuild_run '_multibuild_parallel' '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure' * environment, line 4194: Called _multibuild_parallel '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure' * environment, line 4244: Called _multilib_multibuild_wrapper 'multilib-minimal_abi_src_configure' * environment, line 740: Called multilib-minimal_abi_src_configure !!! Please attach the following file when seeking support: !!! /var/tmp/portage/sys-apps/systemd-215-r3/work/systemd-215-abi_x86_64.amd64/config.log * environment, line 4354: Called multilib_src_configure * ERROR: sys-apps/systemd-215-r3::gentoo failed (configure phase): * econf failed * * environment, line 4796: Called autotools-utils_src_configure * Call stack: * ebuild.sh, line 93: Called src_configure * environment, line 1010: Called econf '--docdir=/usr/share/doc/systemd-215-r3' 'cc_cv_CFLAGS__flto=no' '--enable-dependency-tracking' '--disable-maintainer-mode' '--localstatedir=/var' '--with-pamlibdir=/lib32/security' '--with-bashcompletiondir=/usr/share/bash-completion' '--enable-split-usr' '--with-sysvinit-path=' '--with-sysvrcnd-path=' '--enable-efi' '--enable-ima' '--disable-acl' '--disable-audit' '--disable-libcryptsetup' '--disable-gtk-doc' '--disable-elfutils' '--disable-gcrypt' '--enable-gudev' '--disable-microhttpd' '--disable-gnutls' '--disable-introspection' '--disable-kdbus' '--disable-kmod' '--enable-xz' '--disable-pam' '--disable-polkit' '--without-python' '--disable-python-devel' '--disable-qrencode' '--disable-seccomp' '--disable-selinux' '--disable-tests' '--disable-dbus' '--disable-backlight' '--disable-binfmt' '--disable-bootchart' '--disable-coredump' '--disable-hostnamed' '--disable-localed' '--disable-logind' '--disable-machined' '--disable-networkd' '--disable-quotacheck' '--disable-randomseed' '--disable-readahead' '--disable-resolved' '--disable-rfkill' '--disable-sysusers' '--disable-timedated' '--disable-timesyncd' '--disable-tmpfiles' '--disable-vconsole' '--disable-apparmor' '--disable-chkconfig' 'QUOTAON=/usr/sbin/quotaon' 'QUOTACHECK=/usr/sbin/quotacheck' '--with-dbuspolicydir=/etc/dbus-1/system.d' '--with-dbussessionservicedir=/usr/share/dbus-1/services' '--with-dbussystemservicedir=/usr/share/dbus-1/system-services' '--with-dbusinterfacedir=/usr/share/dbus-1/interfaces' '--with-ntp-servers=0.gentoo.pool.ntp.org 1.gentoo.pool.ntp.org 2.gentoo.pool.ntp.org 3.gentoo.pool.ntp.org' '--with-firmware-path=/lib/firmware/updates:/lib/firmware' 'ac_cv_search_cap_init=' 'ac_cv_header_sys_capability_h=yes' * environment, line 6103: Called multilib-minimal_src_configure * phase-helpers.sh, line 584: Called die * environment, line 4360: Called multilib_parallel_foreach_abi 'multilib-minimal_abi_src_configure' * The specific snippet of code: * environment, line 4658: Called multibuild_parallel_foreach_variant '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure' * die "econf failed" * * environment, line 4253: Called multibuild_foreach_variant '_multibuild_parallel' '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure' * If you need support, post the output of `emerge --info '=sys-apps/systemd-215-r3::gentoo'`, * the complete build log and the output of `emerge -pqv '=sys-apps/systemd-215-r3::gentoo'`. /usr/lib64/portage/bin/isolated-functions.sh: line 195: wait: `econf failed': not a pid or valid job spec * The complete build log is located at '/var/tmp/portage/sys-apps/systemd-215-r3/temp/build.log'. * environment, line 4196: Called _multibuild_run '_multibuild_parallel' '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure' * The ebuild environment file is located at '/var/tmp/portage/sys-apps/systemd-215-r3/temp/environment'. * Working directory: '/var/tmp/portage/sys-apps/systemd-215-r3/work/systemd-215-abi_x86_32.x86' * environment, line 4194: Called _multibuild_parallel '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure' * S: '/var/tmp/portage/sys-apps/systemd-215-r3/work/systemd-215' * environment, line 4244: Called _multilib_multibuild_wrapper 'multilib-minimal_abi_src_configure' * environment, line 740: Called multilib-minimal_abi_src_configure * environment, line 4354: Called multilib_src_configure * environment, line 4796: Called autotools-utils_src_configure * environment, line 1010: Called econf '--docdir=/usr/share/doc/systemd-215-r3' 'cc_cv_CFLAGS__flto=no' '--enable-dependency-tracking' '--disable-maintainer-mode' '--localstatedir=/var' '--with-pamlibdir=/lib64/security' '--with-bashcompletiondir=/usr/share/bash-completion' '--enable-split-usr' '--with-sysvinit-path=' '--with-sysvrcnd-path=' '--enable-efi' '--enable-ima' '--enable-acl' '--disable-audit' '--disable-libcryptsetup' '--disable-gtk-doc' '--disable-elfutils' '--disable-gcrypt' '--enable-gudev' '--disable-microhttpd' '--disable-gnutls' '--enable-introspection' '--disable-kdbus' '--enable-kmod' '--enable-xz' '--enable-pam' '--enable-polkit' '--without-python' '--disable-python-devel' '--disable-qrencode' '--enable-seccomp' '--disable-selinux' '--disable-tests' '--disable-dbus' '--enable-backlight' '--enable-binfmt' '--enable-bootchart' '--enable-coredump' '--enable-hostnamed' '--enable-localed' '--enable-logind' '--enable-machined' '--enable-networkd' '--enable-quotacheck' '--enable-randomseed' '--enable-readahead' '--enable-resolved' '--enable-rfkill' '--enable-sysusers' '--enable-timedated' '--enable-timesyncd' '--enable-tmpfiles' '--enable-vconsole' '--disable-apparmor' '--disable-chkconfig' 'QUOTAON=/usr/sbin/quotaon' 'QUOTACHECK=/usr/sbin/quotacheck' '--with-dbuspolicydir=/etc/dbus-1/system.d' '--with-dbussessionservicedir=/usr/share/dbus-1/services' '--with-dbussystemservicedir=/usr/share/dbus-1/system-services' '--with-dbusinterfacedir=/usr/share/dbus-1/interfaces' '--with-ntp-servers=0.gentoo.pool.ntp.org 1.gentoo.pool.ntp.org 2.gentoo.pool.ntp.org 3.gentoo.pool.ntp.org' '--with-firmware-path=/lib/firmware/updates:/lib/firmware' * phase-helpers.sh, line 584: Called die * The specific snippet of code: * die "econf failed" * * If you need support, post the output of `emerge --info '=sys-apps/systemd-215-r3::gentoo'`, * the complete build log and the output of `emerge -pqv '=sys-apps/systemd-215-r3::gentoo'`. /usr/lib64/portage/bin/isolated-functions.sh: line 195: wait: `econf failed': not a pid or valid job spec * The complete build log is located at '/var/tmp/portage/sys-apps/systemd-215-r3/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/sys-apps/systemd-215-r3/temp/environment'. * Working directory: '/var/tmp/portage/sys-apps/systemd-215-r3/work/systemd-215-abi_x86_64.amd64' * S: '/var/tmp/portage/sys-apps/systemd-215-r3/work/systemd-215' /usr/lib64/portage/bin/isolated-functions.sh: line 226: kill: (6285) - No such process