This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by Mesa configure 10.0.4, which was generated by GNU Autoconf 2.69. Invocation command line was $ ./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --disable-silent-rules --disable-dependency-tracking --enable-dri --enable-glx --enable-shared-glapi --enable-texture-float --disable-debug --enable-egl --enable-gbm --enable-gles1 --enable-gles2 --enable-glx-tls --enable-osmesa --disable-asm --without-llvm-shared-libs --with-dri-drivers=,swrast --with-gallium-drivers=,swrast PYTHON2=/usr/bin/python2.7 --with-egl-platforms=x11,drm --enable-gallium-llvm --enable-openvg --enable-gallium-egl --disable-r600-llvm-compiler --enable-vdpau --enable-xa --enable-xvmc --enable-opencl --with-opencl-libdir=/usr/lib64/OpenCL/vendors/mesa --with-clang-libdir=/usr/lib ## --------- ## ## Platform. ## ## --------- ## hostname = iqgryn uname -m = x86_64 uname -r = 3.12.13-gentoo-desktop uname -s = Linux uname -v = #1 SMP PREEMPT Sun Mar 9 10:26:52 CDT 2014 /usr/bin/uname -p = AMD FX(tm)-8350 Eight-Core Processor /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /var/tmp/portage/media-libs/mesa-10.0.4/temp/python2.7/bin PATH: /usr/lib64/portage/bin/ebuild-helpers/xattr PATH: /usr/lib64/portage/bin/ebuild-helpers PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /usr/sbin PATH: /usr/bin PATH: /sbin PATH: /bin PATH: /opt/bin PATH: /usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3 ## ----------- ## ## Core tests. ## ## ----------- ## configure:3092: checking build system type configure:3106: result: x86_64-pc-linux-gnu configure:3126: checking host system type configure:3139: result: x86_64-pc-linux-gnu configure:3159: checking target system type configure:3172: result: x86_64-pc-linux-gnu configure:3215: checking for a BSD-compatible install configure:3283: result: /usr/lib64/portage/bin/ebuild-helpers/xattr/install -c configure:3294: checking whether build environment is sane configure:3349: result: yes configure:3500: checking for a thread-safe mkdir -p configure:3539: result: /bin/mkdir -p configure:3546: checking for gawk configure:3562: found /usr/bin/gawk configure:3573: result: gawk configure:3584: checking whether make sets $(MAKE) configure:3606: result: yes configure:3635: checking whether make supports nested variables configure:3652: result: yes configure:3751: checking whether make supports nested variables configure:3768: result: yes configure:3792: checking for style of include used by make configure:3820: result: GNU configure:3851: checking for x86_64-pc-linux-gnu-gcc configure:3867: found /usr/bin/x86_64-pc-linux-gnu-gcc configure:3878: result: x86_64-pc-linux-gnu-gcc configure:4147: checking for C compiler version configure:4156: x86_64-pc-linux-gnu-gcc --version >&5 x86_64-pc-linux-gnu-gcc (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) 4.7.3 Copyright (C) 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:4167: $? = 0 configure:4156: x86_64-pc-linux-gnu-gcc -v >&5 Using built-in specs. COLLECT_GCC=/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3/x86_64-pc-linux-gnu-gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-pc-linux-gnu/4.7.3/lto-wrapper Target: x86_64-pc-linux-gnu Configured with: /var/tmp/portage/sys-devel/gcc-4.7.3-r1/work/gcc-4.7.3/configure --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/include/g++-v4 --with-python-dir=/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/python --enable-languages=c,c++,fortran --enable-obsolete --enable-secureplt --disable-werror --with-system-zlib --enable-nls --without-included-gettext --enable-checking=release --with-bugurl=https://bugs.gentoo.org/ --with-pkgversion='Gentoo 4.7.3-r1 p1.4, pie-0.5.5' --enable-libstdcxx-time --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --enable-multilib --with-multilib-list=m32,m64 --disable-altivec --disable-fixed-point --enable-targets=all --disable-libgcj --enable-libgomp --disable-libmudflap --disable-libssp --enable-lto --with-cloog --with-ppl --with-cloog-include=/usr/include/cloog-ppl --disable-ppl-version-check Thread model: posix gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) configure:4167: $? = 0 configure:4156: x86_64-pc-linux-gnu-gcc -V >&5 x86_64-pc-linux-gnu-gcc: error: unrecognized command line option '-V' x86_64-pc-linux-gnu-gcc: fatal error: no input files compilation terminated. configure:4167: $? = 1 configure:4156: x86_64-pc-linux-gnu-gcc -qversion >&5 x86_64-pc-linux-gnu-gcc: error: unrecognized command line option '-qversion' x86_64-pc-linux-gnu-gcc: fatal error: no input files compilation terminated. configure:4167: $? = 1 configure:4187: checking whether the C compiler works configure:4209: x86_64-pc-linux-gnu-gcc -march=native -O2 -pipe -ggdb -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 configure:4213: $? = 0 configure:4261: result: yes configure:4264: checking for C compiler default output file name configure:4266: result: a.out configure:4272: checking for suffix of executables configure:4279: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 configure:4283: $? = 0 configure:4305: result: configure:4327: checking whether we are cross compiling configure:4335: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 configure:4339: $? = 0 configure:4346: ./conftest configure:4350: $? = 0 configure:4365: result: no configure:4370: checking for suffix of object files configure:4392: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:4396: $? = 0 configure:4417: result: o configure:4421: checking whether we are using the GNU C compiler configure:4440: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:4440: $? = 0 configure:4449: result: yes configure:4458: checking whether x86_64-pc-linux-gnu-gcc accepts -g configure:4478: x86_64-pc-linux-gnu-gcc -c -g conftest.c >&5 configure:4478: $? = 0 configure:4519: result: yes configure:4536: checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89 configure:4599: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:4599: $? = 0 configure:4612: result: none needed configure:4634: checking dependency style of x86_64-pc-linux-gnu-gcc configure:4745: result: none configure:4766: checking for x86_64-pc-linux-gnu-ar configure:4782: found /usr/bin/x86_64-pc-linux-gnu-ar configure:4793: result: x86_64-pc-linux-gnu-ar configure:4863: checking the archiver (x86_64-pc-linux-gnu-ar) interface configure:4873: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:4873: $? = 0 configure:4875: x86_64-pc-linux-gnu-ar cru libconftest.a conftest.o >&5 configure:4878: $? = 0 configure:4901: result: ar configure:4939: checking how to run the C preprocessor configure:4970: x86_64-pc-linux-gnu-gcc -E conftest.c configure:4970: $? = 0 configure:4984: x86_64-pc-linux-gnu-gcc -E conftest.c conftest.c:11:28: fatal error: ac_nonexistent.h: No such file or directory compilation terminated. configure:4984: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "10.0.4" | #define PACKAGE_STRING "Mesa 10.0.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "10.0.4" | /* end confdefs.h. */ | #include configure:5009: result: x86_64-pc-linux-gnu-gcc -E configure:5029: x86_64-pc-linux-gnu-gcc -E conftest.c configure:5029: $? = 0 configure:5043: x86_64-pc-linux-gnu-gcc -E conftest.c conftest.c:11:28: fatal error: ac_nonexistent.h: No such file or directory compilation terminated. configure:5043: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "10.0.4" | #define PACKAGE_STRING "Mesa 10.0.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "10.0.4" | /* end confdefs.h. */ | #include configure:5079: checking for x86_64-pc-linux-gnu-gcc configure:5106: result: x86_64-pc-linux-gnu-gcc configure:5375: checking for C compiler version configure:5384: x86_64-pc-linux-gnu-gcc --version >&5 x86_64-pc-linux-gnu-gcc (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) 4.7.3 Copyright (C) 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:5395: $? = 0 configure:5384: x86_64-pc-linux-gnu-gcc -v >&5 Using built-in specs. COLLECT_GCC=/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3/x86_64-pc-linux-gnu-gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-pc-linux-gnu/4.7.3/lto-wrapper Target: x86_64-pc-linux-gnu Configured with: /var/tmp/portage/sys-devel/gcc-4.7.3-r1/work/gcc-4.7.3/configure --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/include/g++-v4 --with-python-dir=/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/python --enable-languages=c,c++,fortran --enable-obsolete --enable-secureplt --disable-werror --with-system-zlib --enable-nls --without-included-gettext --enable-checking=release --with-bugurl=https://bugs.gentoo.org/ --with-pkgversion='Gentoo 4.7.3-r1 p1.4, pie-0.5.5' --enable-libstdcxx-time --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --enable-multilib --with-multilib-list=m32,m64 --disable-altivec --disable-fixed-point --enable-targets=all --disable-libgcj --enable-libgomp --disable-libmudflap --disable-libssp --enable-lto --with-cloog --with-ppl --with-cloog-include=/usr/include/cloog-ppl --disable-ppl-version-check Thread model: posix gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) configure:5395: $? = 0 configure:5384: x86_64-pc-linux-gnu-gcc -V >&5 x86_64-pc-linux-gnu-gcc: error: unrecognized command line option '-V' x86_64-pc-linux-gnu-gcc: fatal error: no input files compilation terminated. configure:5395: $? = 1 configure:5384: x86_64-pc-linux-gnu-gcc -qversion >&5 x86_64-pc-linux-gnu-gcc: error: unrecognized command line option '-qversion' x86_64-pc-linux-gnu-gcc: fatal error: no input files compilation terminated. configure:5395: $? = 1 configure:5399: checking whether we are using the GNU C compiler configure:5427: result: yes configure:5436: checking whether x86_64-pc-linux-gnu-gcc accepts -g configure:5497: result: yes configure:5514: checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89 configure:5590: result: none needed configure:5612: checking dependency style of x86_64-pc-linux-gnu-gcc configure:5723: result: none configure:5752: checking for x86_64-pc-linux-gnu-g++ configure:5768: found /usr/bin/x86_64-pc-linux-gnu-g++ configure:5779: result: x86_64-pc-linux-gnu-g++ configure:5850: checking for C++ compiler version configure:5859: x86_64-pc-linux-gnu-g++ --version >&5 x86_64-pc-linux-gnu-g++ (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) 4.7.3 Copyright (C) 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:5870: $? = 0 configure:5859: x86_64-pc-linux-gnu-g++ -v >&5 Using built-in specs. COLLECT_GCC=/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3/x86_64-pc-linux-gnu-g++ COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-pc-linux-gnu/4.7.3/lto-wrapper Target: x86_64-pc-linux-gnu Configured with: /var/tmp/portage/sys-devel/gcc-4.7.3-r1/work/gcc-4.7.3/configure --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/include/g++-v4 --with-python-dir=/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/python --enable-languages=c,c++,fortran --enable-obsolete --enable-secureplt --disable-werror --with-system-zlib --enable-nls --without-included-gettext --enable-checking=release --with-bugurl=https://bugs.gentoo.org/ --with-pkgversion='Gentoo 4.7.3-r1 p1.4, pie-0.5.5' --enable-libstdcxx-time --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --enable-multilib --with-multilib-list=m32,m64 --disable-altivec --disable-fixed-point --enable-targets=all --disable-libgcj --enable-libgomp --disable-libmudflap --disable-libssp --enable-lto --with-cloog --with-ppl --with-cloog-include=/usr/include/cloog-ppl --disable-ppl-version-check Thread model: posix gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) configure:5870: $? = 0 configure:5859: x86_64-pc-linux-gnu-g++ -V >&5 x86_64-pc-linux-gnu-g++: error: unrecognized command line option '-V' x86_64-pc-linux-gnu-g++: fatal error: no input files compilation terminated. configure:5870: $? = 1 configure:5859: x86_64-pc-linux-gnu-g++ -qversion >&5 x86_64-pc-linux-gnu-g++: error: unrecognized command line option '-qversion' x86_64-pc-linux-gnu-g++: fatal error: no input files compilation terminated. configure:5870: $? = 1 configure:5874: checking whether we are using the GNU C++ compiler configure:5893: x86_64-pc-linux-gnu-g++ -c -march=native -O2 -pipe -ggdb conftest.cpp >&5 configure:5893: $? = 0 configure:5902: result: yes configure:5911: checking whether x86_64-pc-linux-gnu-g++ accepts -g configure:5931: x86_64-pc-linux-gnu-g++ -c -g conftest.cpp >&5 configure:5931: $? = 0 configure:5972: result: yes configure:5997: checking dependency style of x86_64-pc-linux-gnu-g++ configure:6108: result: none configure:6124: checking whether x86_64-pc-linux-gnu-gcc and cc understand -c and -o together configure:6155: x86_64-pc-linux-gnu-gcc -c conftest.c -o conftest2.o >&5 configure:6159: $? = 0 configure:6165: x86_64-pc-linux-gnu-gcc -c conftest.c -o conftest2.o >&5 configure:6169: $? = 0 configure:6180: cc -c conftest.c >&5 configure:6184: $? = 0 configure:6192: cc -c conftest.c -o conftest2.o >&5 configure:6196: $? = 0 configure:6202: cc -c conftest.c -o conftest2.o >&5 configure:6206: $? = 0 configure:6224: result: yes configure:6258: checking dependency style of x86_64-pc-linux-gnu-gcc configure:6367: result: none configure:6386: checking for gmake configure:6402: found /usr/bin/gmake configure:6413: result: gmake configure:6428: checking for python2 configure:6455: result: /usr/bin/python2.7 configure:6472: checking python2.7 module: libxml2 configure:6477: result: yes configure:6492: checking for a sed that does not truncate output configure:6556: result: /bin/sed configure:6610: checking how to print strings configure:6637: result: printf configure:6658: checking for a sed that does not truncate output configure:6722: result: /bin/sed configure:6740: checking for grep that handles long lines and -e configure:6798: result: /bin/grep configure:6803: checking for egrep configure:6865: result: /bin/grep -E configure:6870: checking for fgrep configure:6932: result: /bin/grep -F configure:6967: checking for ld used by x86_64-pc-linux-gnu-gcc configure:7034: result: /usr/x86_64-pc-linux-gnu/bin/ld configure:7041: checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld configure:7056: result: yes configure:7068: checking for BSD- or MS-compatible name lister (nm) configure:7117: result: /usr/bin/x86_64-pc-linux-gnu-nm -B configure:7247: checking the name lister (/usr/bin/x86_64-pc-linux-gnu-nm -B) interface configure:7254: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:7257: /usr/bin/x86_64-pc-linux-gnu-nm -B "conftest.o" configure:7260: output 0000000000000000 B some_variable configure:7267: result: BSD nm configure:7270: checking whether ln -s works configure:7274: result: yes configure:7282: checking the maximum length of command line arguments configure:7412: result: 1572864 configure:7429: checking whether the shell understands some XSI constructs configure:7439: result: yes configure:7443: checking whether the shell understands "+=" configure:7449: result: yes configure:7484: checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format configure:7524: result: func_convert_file_noop configure:7531: checking how to convert x86_64-pc-linux-gnu file names to toolchain format configure:7551: result: func_convert_file_noop configure:7558: checking for /usr/x86_64-pc-linux-gnu/bin/ld option to reload object files configure:7565: result: -r configure:7599: checking for x86_64-pc-linux-gnu-objdump configure:7615: found /usr/bin/x86_64-pc-linux-gnu-objdump configure:7626: result: x86_64-pc-linux-gnu-objdump configure:7698: checking how to recognize dependent libraries configure:7900: result: pass_all configure:7945: checking for x86_64-pc-linux-gnu-dlltool configure:7975: result: no configure:7985: checking for dlltool configure:8015: result: no configure:8045: checking how to associate runtime and link libraries configure:8072: result: printf %s\n configure:8088: checking for x86_64-pc-linux-gnu-ar configure:8115: result: x86_64-pc-linux-gnu-ar configure:8196: checking for archiver @FILE support configure:8213: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:8213: $? = 0 configure:8216: x86_64-pc-linux-gnu-ar cru libconftest.a @conftest.lst >&5 configure:8219: $? = 0 configure:8224: x86_64-pc-linux-gnu-ar cru libconftest.a @conftest.lst >&5 x86_64-pc-linux-gnu-ar: conftest.o: No such file or directory configure:8227: $? = 1 configure:8239: result: @ configure:8257: checking for x86_64-pc-linux-gnu-strip configure:8273: found /usr/bin/x86_64-pc-linux-gnu-strip configure:8284: result: x86_64-pc-linux-gnu-strip configure:8356: checking for x86_64-pc-linux-gnu-ranlib configure:8372: found /usr/bin/x86_64-pc-linux-gnu-ranlib configure:8383: result: x86_64-pc-linux-gnu-ranlib configure:8525: checking command to parse /usr/bin/x86_64-pc-linux-gnu-nm -B output from x86_64-pc-linux-gnu-gcc object configure:8645: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:8648: $? = 0 configure:8652: /usr/bin/x86_64-pc-linux-gnu-nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' \> conftest.nm configure:8655: $? = 0 configure:8721: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c conftstm.o >&5 configure:8724: $? = 0 configure:8762: result: ok configure:8799: checking for sysroot configure:8829: result: no configure:8906: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:8909: $? = 0 configure:9045: checking for x86_64-pc-linux-gnu-mt configure:9075: result: no configure:9085: checking for mt configure:9115: result: no configure:9135: checking if : is a manifest tool configure:9141: : '-?' configure:9149: result: no configure:9787: checking for ANSI C header files configure:9807: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:9807: $? = 0 configure:9880: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 configure:9880: $? = 0 configure:9880: ./conftest configure:9880: $? = 0 configure:9891: result: yes configure:9904: checking for sys/types.h configure:9904: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:9904: $? = 0 configure:9904: result: yes configure:9904: checking for sys/stat.h configure:9904: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:9904: $? = 0 configure:9904: result: yes configure:9904: checking for stdlib.h configure:9904: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:9904: $? = 0 configure:9904: result: yes configure:9904: checking for string.h configure:9904: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:9904: $? = 0 configure:9904: result: yes configure:9904: checking for memory.h configure:9904: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:9904: $? = 0 configure:9904: result: yes configure:9904: checking for strings.h configure:9904: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:9904: $? = 0 configure:9904: result: yes configure:9904: checking for inttypes.h configure:9904: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:9904: $? = 0 configure:9904: result: yes configure:9904: checking for stdint.h configure:9904: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:9904: $? = 0 configure:9904: result: yes configure:9904: checking for unistd.h configure:9904: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:9904: $? = 0 configure:9904: result: yes configure:9918: checking for dlfcn.h configure:9918: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:9918: $? = 0 configure:9918: result: yes configure:10134: checking for objdir configure:10149: result: .libs configure:10420: checking if x86_64-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions configure:10438: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb -fno-rtti -fno-exceptions conftest.c >&5 cc1: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C [enabled by default] configure:10442: $? = 0 configure:10455: result: no configure:10782: checking for x86_64-pc-linux-gnu-gcc option to produce PIC configure:10789: result: -fPIC -DPIC configure:10797: checking if x86_64-pc-linux-gnu-gcc PIC flag -fPIC -DPIC works configure:10815: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb -fPIC -DPIC -DPIC conftest.c >&5 configure:10819: $? = 0 configure:10832: result: yes configure:10861: checking if x86_64-pc-linux-gnu-gcc static flag -static works configure:10889: result: yes configure:10904: checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o configure:10925: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb -o out/conftest2.o conftest.c >&5 configure:10929: $? = 0 configure:10951: result: yes configure:10959: checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o configure:11006: result: yes configure:11039: checking whether the x86_64-pc-linux-gnu-gcc linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries configure:12192: result: yes configure:12229: checking whether -lc should be explicitly linked in configure:12237: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 configure:12240: $? = 0 configure:12255: x86_64-pc-linux-gnu-gcc -shared -fPIC -DPIC conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /bin/grep -lc \>/dev/null 2\>\&1 configure:12258: $? = 0 configure:12272: result: no configure:12432: checking dynamic linker characteristics configure:12956: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu -Wl,-rpath -Wl,/foo conftest.c >&5 configure:12956: $? = 0 configure:13178: result: GNU/Linux ld.so configure:13285: checking how to hardcode library paths into programs configure:13310: result: immediate configure:13850: checking whether stripping libraries is possible configure:13855: result: yes configure:13890: checking if libtool supports shared libraries configure:13892: result: yes configure:13895: checking whether to build shared libraries configure:13916: result: yes configure:13919: checking whether to build static libraries configure:13923: result: no configure:13946: checking how to run the C++ preprocessor configure:13973: x86_64-pc-linux-gnu-g++ -E conftest.cpp configure:13973: $? = 0 configure:13987: x86_64-pc-linux-gnu-g++ -E conftest.cpp conftest.cpp:23:28: fatal error: ac_nonexistent.h: No such file or directory compilation terminated. configure:13987: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "10.0.4" | #define PACKAGE_STRING "Mesa 10.0.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "10.0.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | #include configure:14012: result: x86_64-pc-linux-gnu-g++ -E configure:14032: x86_64-pc-linux-gnu-g++ -E conftest.cpp configure:14032: $? = 0 configure:14046: x86_64-pc-linux-gnu-g++ -E conftest.cpp conftest.cpp:23:28: fatal error: ac_nonexistent.h: No such file or directory compilation terminated. configure:14046: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "10.0.4" | #define PACKAGE_STRING "Mesa 10.0.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "10.0.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | #include configure:14215: checking for ld used by x86_64-pc-linux-gnu-g++ configure:14282: result: /usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64 configure:14289: checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) is GNU ld configure:14304: result: yes configure:14359: checking whether the x86_64-pc-linux-gnu-g++ linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries configure:15364: result: yes configure:15400: x86_64-pc-linux-gnu-g++ -c -march=native -O2 -pipe -ggdb conftest.cpp >&5 configure:15403: $? = 0 configure:15923: checking for x86_64-pc-linux-gnu-g++ option to produce PIC configure:15930: result: -fPIC -DPIC configure:15938: checking if x86_64-pc-linux-gnu-g++ PIC flag -fPIC -DPIC works configure:15956: x86_64-pc-linux-gnu-g++ -c -march=native -O2 -pipe -ggdb -fPIC -DPIC -DPIC conftest.cpp >&5 configure:15960: $? = 0 configure:15973: result: yes configure:15996: checking if x86_64-pc-linux-gnu-g++ static flag -static works configure:16024: result: yes configure:16036: checking if x86_64-pc-linux-gnu-g++ supports -c -o file.o configure:16057: x86_64-pc-linux-gnu-g++ -c -march=native -O2 -pipe -ggdb -o out/conftest2.o conftest.cpp >&5 configure:16061: $? = 0 configure:16083: result: yes configure:16088: checking if x86_64-pc-linux-gnu-g++ supports -c -o file.o configure:16135: result: yes configure:16165: checking whether the x86_64-pc-linux-gnu-g++ linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries configure:16201: result: yes configure:16342: checking dynamic linker characteristics configure:17022: result: GNU/Linux ld.so configure:17075: checking how to hardcode library paths into programs configure:17100: result: immediate configure:17166: checking for bison configure:17182: found /usr/bin/bison configure:17193: result: bison -y configure:17209: checking if bison is the parser generator configure:17222: result: yes configure:17239: checking for flex configure:17255: found /usr/bin/flex configure:17266: result: flex configure:17304: flex conftest.l configure:17308: $? = 0 configure:17310: checking lex output file root configure:17324: result: lex.yy configure:17329: checking lex library configure:17343: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 /var/tmp/portage/media-libs/mesa-10.0.4/temp/cca9fTmx.o: In function `input': /var/tmp/portage/media-libs/mesa-10.0.4/work/Mesa-10.0.4-amd64/lex.yy.c:1170: undefined reference to `yywrap' /var/tmp/portage/media-libs/mesa-10.0.4/temp/cca9fTmx.o: In function `yylex': /var/tmp/portage/media-libs/mesa-10.0.4/work/Mesa-10.0.4-amd64/lex.yy.c:869: undefined reference to `yywrap' /var/tmp/portage/media-libs/mesa-10.0.4/temp/cca9fTmx.o: In function `main': /var/tmp/portage/media-libs/mesa-10.0.4/work/Mesa-10.0.4-amd64/conftest.l:18: undefined reference to `yywrap' collect2: error: ld returned 1 exit status configure:17343: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "10.0.4" | #define PACKAGE_STRING "Mesa 10.0.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "10.0.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | #line 3 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 5 | #define YY_FLEX_SUBMINOR_VERSION 37 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | #ifdef __cplusplus | | /* The "const" storage-class-modifier is valid. */ | #define YY_USE_CONST | | #else /* ! __cplusplus */ | | /* C99 requires __STDC__ to be defined as 1. */ | #if defined (__STDC__) | | #define YY_USE_CONST | | #endif /* defined (__STDC__) */ | #endif /* ! __cplusplus */ | | #ifdef YY_USE_CONST | #define yyconst const | #else | #define yyconst | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an unsigned | * integer for use as an array index. If the signed char is negative, | * we want to instead treat it as an 8-bit unsigned char, hence the | * double cast. | */ | #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart(yyin ) | | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #define YY_BUF_SIZE 16384 | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern yy_size_t yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | yy_size_t yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | yy_size_t yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ | yy_size_t yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = (char *) 0; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart (FILE *input_file ); | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); | void yy_delete_buffer (YY_BUFFER_STATE b ); | void yy_flush_buffer (YY_BUFFER_STATE b ); | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state (void ); | | static void yyensure_buffer_stack (void ); | static void yy_load_buffer_state (void ); | static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); | | #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); | YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); | | void *yyalloc (yy_size_t ); | void *yyrealloc (void *,yy_size_t ); | void yyfree (void * ); | | #define yy_new_buffer yy_create_buffer | | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | | typedef unsigned char YY_CHAR; | | FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; | | typedef int yy_state_type; | | extern int yylineno; | | int yylineno = 1; | | extern char *yytext; | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state (void ); | static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); | static int yy_get_next_buffer (void ); | static void yy_fatal_error (yyconst char msg[] ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (size_t) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static yyconst flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static yyconst flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static yyconst flex_int32_t yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int32_t yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static yyconst flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static yyconst flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static yyconst flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 469 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals (void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy (void ); | | int yyget_debug (void ); | | void yyset_debug (int debug_flag ); | | YY_EXTRA_TYPE yyget_extra (void ); | | void yyset_extra (YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in (void ); | | void yyset_in (FILE * in_str ); | | FILE *yyget_out (void ); | | void yyset_out (FILE * out_str ); | | yy_size_t yyget_leng (void ); | | char *yyget_text (void ); | | int yyget_lineno (void ); | | void yyset_lineno (int line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap (void ); | #else | extern int yywrap (void ); | #endif | #endif | | static void yyunput (int c,char *buf_ptr ); | | #ifndef yytext_ptr | static void yy_flex_strncpy (char *,yyconst char *,int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * ); | #endif | | #ifndef YY_NO_INPUT | | #ifdef __cplusplus | static int yyinput (void ); | #else | static int input (void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #define YY_READ_BUF_SIZE 8192 | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | size_t n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | register yy_state_type yy_current_state; | register char *yy_cp, *yy_bp; | register int yy_act; | | #line 1 "conftest.l" | | #line 653 "lex.yy.c" | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | while ( 1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (yy_c_buf_p) - (yytext_ptr); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | find_rule: /* we branch to this label when backing up */ | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 792 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | register char *source = (yytext_ptr); | register int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | yy_size_t num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart(yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | register yy_state_type yy_current_state; | register char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | register int yy_is_jam; | | register YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | static void yyunput (int c, register char * yy_bp ) | { | register char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | register yy_size_t number_to_move = (yy_n_chars) + 2; | register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | register char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart(yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return EOF; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_init_buffer(YY_CURRENT_BUFFER,input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer(b,file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree((void *) b->yy_ch_buf ); | | yyfree((void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer(b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | int grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return 0; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = 0; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer(b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) | { | | return yy_scan_bytes(yystr,strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = _yybytes_len + 2; | buf = (char *) yyalloc(n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer(buf,n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yy_fatal_error (yyconst char* msg ) | { | (void) fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | yy_size_t yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param line_number | * | */ | void yyset_lineno (int line_number ) | { | | yylineno = line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * in_str ) | { | yyin = in_str ; | } | | void yyset_out (FILE * out_str ) | { | yyout = out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int bdebug ) | { | yy_flex_debug = bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = 0; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = (char *) 0; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = (FILE *) 0; | yyout = (FILE *) 0; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) | { | register int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * s ) | { | register int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return (void *) malloc( size ); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return (void *) realloc( (char *) ptr, size ); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:17343: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c -lfl >&5 configure:17343: $? = 0 configure:17353: result: -lfl configure:17359: checking whether yytext is a pointer configure:17376: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c -lfl >&5 configure:17376: $? = 0 configure:17384: result: yes configure:17401: checking if flex is the lexer generator configure:17414: result: yes configure:17428: checking for perl configure:17446: found /usr/bin/perl configure:17458: result: /usr/bin/perl configure:17469: checking for indent configure:17497: result: cat configure:17564: checking if compiling with clang configure:17582: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb conftest.c >&5 conftest.c: In function 'main': conftest.c:30:8: error: unknown type name 'not' configure:17582: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "10.0.4" | #define PACKAGE_STRING "Mesa 10.0.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "10.0.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | /* end confdefs.h. */ | | int | main () | { | | #ifndef __clang__ | not clang | #endif | | ; | return 0; | } configure:17589: result: no configure:17594: checking whether gcc version is sufficient configure:17610: result: yes configure:17639: checking for x86_64-pc-linux-gnu-pkg-config configure:17657: found /usr/bin/x86_64-pc-linux-gnu-pkg-config configure:17669: result: /usr/bin/x86_64-pc-linux-gnu-pkg-config configure:17737: checking pkg-config is at least version 0.9.0 configure:17740: result: yes configure:17784: checking whether x86_64-pc-linux-gnu-gcc supports -Werror=missing-prototypes configure:17799: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 configure:17799: $? = 0 configure:17800: result: yes configure:17812: checking whether x86_64-pc-linux-gnu-gcc supports -fvisibility=hidden configure:17827: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fvisibility=hidden -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 configure:17827: $? = 0 configure:17828: result: yes configure:17852: checking whether x86_64-pc-linux-gnu-g++ supports -fvisibility=hidden configure:17873: x86_64-pc-linux-gnu-g++ -o conftest -march=native -O2 -pipe -ggdb -Wall -fvisibility=hidden -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.cpp >&5 configure:17873: $? = 0 configure:17874: result: yes configure:17910: checking whether C compiler accepts -msse4.1 configure:17929: x86_64-pc-linux-gnu-gcc -c -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -msse4.1 conftest.c >&5 configure:17929: $? = 0 configure:17937: result: yes configure:18094: WARNING: Floating-point textures enabled. configure:18096: WARNING: Please consult docs/patents.txt with your lawyer before building Mesa. configure:18156: checking whether to enable assembly configure:18158: result: no configure:18222: checking for dlopen configure:18222: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 /var/tmp/portage/media-libs/mesa-10.0.4/temp/ccXPJ9RH.o: In function `main': /var/tmp/portage/media-libs/mesa-10.0.4/work/Mesa-10.0.4-amd64/conftest.c:58: undefined reference to `dlopen' collect2: error: ld returned 1 exit status configure:18222: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "10.0.4" | #define PACKAGE_STRING "Mesa 10.0.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "10.0.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | /* end confdefs.h. */ | /* Define dlopen to an innocuous variant, in case declares dlopen. | For example, HP-UX 11i declares gettimeofday. */ | #define dlopen innocuous_dlopen | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char dlopen (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef dlopen | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char dlopen (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub_dlopen || defined __stub___dlopen | choke me | #endif | | int | main () | { | return dlopen (); | ; | return 0; | } configure:18222: result: no configure:18226: checking for dlopen in -ldl configure:18251: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c -ldl >&5 configure:18251: $? = 0 configure:18260: result: yes configure:18276: checking for clock_gettime configure:18276: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 configure:18276: $? = 0 configure:18276: result: yes configure:18332: checking for posix_memalign configure:18332: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 configure:18332: $? = 0 configure:18332: result: yes configure:18506: checking for the pthreads library -lpthreads configure:18544: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c -lpthreads >&5 /usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lpthreads collect2: error: ld returned 1 exit status configure:18544: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "10.0.4" | #define PACKAGE_STRING "Mesa 10.0.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "10.0.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_CLOCK_GETTIME 1 | /* end confdefs.h. */ | #include | static void routine(void *a) { a = 0; } | static void *start_routine(void *a) { return a; } | int | main () | { | pthread_t th; pthread_attr_t attr; | pthread_create(&th, 0, start_routine, 0); | pthread_join(th, 0); | pthread_attr_init(&attr); | pthread_cleanup_push(routine, 0); | pthread_cleanup_pop(0) /* ; */ | ; | return 0; | } configure:18553: result: no configure:18451: checking whether pthreads work without any flags configure:18544: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 /var/tmp/portage/media-libs/mesa-10.0.4/temp/ccaGokh6.o: In function `main': /var/tmp/portage/media-libs/mesa-10.0.4/work/Mesa-10.0.4-amd64/conftest.c:32: undefined reference to `pthread_create' /var/tmp/portage/media-libs/mesa-10.0.4/work/Mesa-10.0.4-amd64/conftest.c:33: undefined reference to `pthread_join' /var/tmp/portage/media-libs/mesa-10.0.4/work/Mesa-10.0.4-amd64/conftest.c:35: undefined reference to `__pthread_register_cancel' /var/tmp/portage/media-libs/mesa-10.0.4/work/Mesa-10.0.4-amd64/conftest.c:36: undefined reference to `__pthread_unregister_cancel' collect2: error: ld returned 1 exit status configure:18544: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "10.0.4" | #define PACKAGE_STRING "Mesa 10.0.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "10.0.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_CLOCK_GETTIME 1 | /* end confdefs.h. */ | #include | static void routine(void *a) { a = 0; } | static void *start_routine(void *a) { return a; } | int | main () | { | pthread_t th; pthread_attr_t attr; | pthread_create(&th, 0, start_routine, 0); | pthread_join(th, 0); | pthread_attr_init(&attr); | pthread_cleanup_push(routine, 0); | pthread_cleanup_pop(0) /* ; */ | ; | return 0; | } configure:18553: result: no configure:18456: checking whether pthreads work with -Kthread configure:18544: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -Kthread -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 x86_64-pc-linux-gnu-gcc: error: unrecognized command line option '-Kthread' configure:18544: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "10.0.4" | #define PACKAGE_STRING "Mesa 10.0.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "10.0.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_CLOCK_GETTIME 1 | /* end confdefs.h. */ | #include | static void routine(void *a) { a = 0; } | static void *start_routine(void *a) { return a; } | int | main () | { | pthread_t th; pthread_attr_t attr; | pthread_create(&th, 0, start_routine, 0); | pthread_join(th, 0); | pthread_attr_init(&attr); | pthread_cleanup_push(routine, 0); | pthread_cleanup_pop(0) /* ; */ | ; | return 0; | } configure:18553: result: no configure:18456: checking whether pthreads work with -kthread configure:18544: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -kthread -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 x86_64-pc-linux-gnu-gcc: error: unrecognized command line option '-kthread' configure:18544: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "10.0.4" | #define PACKAGE_STRING "Mesa 10.0.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "10.0.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_CLOCK_GETTIME 1 | /* end confdefs.h. */ | #include | static void routine(void *a) { a = 0; } | static void *start_routine(void *a) { return a; } | int | main () | { | pthread_t th; pthread_attr_t attr; | pthread_create(&th, 0, start_routine, 0); | pthread_join(th, 0); | pthread_attr_init(&attr); | pthread_cleanup_push(routine, 0); | pthread_cleanup_pop(0) /* ; */ | ; | return 0; | } configure:18553: result: no configure:18506: checking for the pthreads library -llthread configure:18544: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c -llthread >&5 /usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -llthread collect2: error: ld returned 1 exit status configure:18544: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "10.0.4" | #define PACKAGE_STRING "Mesa 10.0.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "10.0.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_CLOCK_GETTIME 1 | /* end confdefs.h. */ | #include | static void routine(void *a) { a = 0; } | static void *start_routine(void *a) { return a; } | int | main () | { | pthread_t th; pthread_attr_t attr; | pthread_create(&th, 0, start_routine, 0); | pthread_join(th, 0); | pthread_attr_init(&attr); | pthread_cleanup_push(routine, 0); | pthread_cleanup_pop(0) /* ; */ | ; | return 0; | } configure:18553: result: no configure:18456: checking whether pthreads work with -pthread configure:18544: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -pthread -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 configure:18544: $? = 0 configure:18553: result: yes configure:18572: checking for joinable pthread attribute configure:18587: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -pthread -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 configure:18587: $? = 0 configure:18593: result: PTHREAD_CREATE_JOINABLE configure:18603: checking if more special flags are required for pthreads configure:18617: result: no configure:18623: checking for PTHREAD_PRIO_INHERIT configure:18641: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -pthread -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 conftest.c: In function 'main': conftest.c:30:9: error: 'PTHREAD_PRIO_INHERIT' undeclared (first use in this function) conftest.c:30:9: note: each undeclared identifier is reported only once for each function it appears in conftest.c:30:5: warning: unused variable 'i' [-Wunused-variable] configure:18641: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "10.0.4" | #define PACKAGE_STRING "Mesa 10.0.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "10.0.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_CLOCK_GETTIME 1 | /* end confdefs.h. */ | | #include | int | main () | { | int i = PTHREAD_PRIO_INHERIT; | ; | return 0; | } configure:18650: result: no configure:19135: checking for LIBDRM configure:19142: $PKG_CONFIG --exists --print-errors "libdrm >= $LIBDRM_REQUIRED" configure:19145: $? = 0 configure:19159: $PKG_CONFIG --exists --print-errors "libdrm >= $LIBDRM_REQUIRED" configure:19162: $? = 0 configure:19200: result: yes configure:19340: checking for GLPROTO configure:19347: $PKG_CONFIG --exists --print-errors "glproto >= $GLPROTO_REQUIRED" configure:19350: $? = 0 configure:19364: $PKG_CONFIG --exists --print-errors "glproto >= $GLPROTO_REQUIRED" configure:19367: $? = 0 configure:19425: result: yes configure:19435: checking for DRI2PROTO configure:19442: $PKG_CONFIG --exists --print-errors "dri2proto >= $DRI2PROTO_REQUIRED" configure:19445: $? = 0 configure:19459: $PKG_CONFIG --exists --print-errors "dri2proto >= $DRI2PROTO_REQUIRED" configure:19462: $? = 0 configure:19520: result: yes configure:19533: checking for XF86VIDMODE configure:19540: $PKG_CONFIG --exists --print-errors "xxf86vm" configure:19543: $? = 0 configure:19557: $PKG_CONFIG --exists --print-errors "xxf86vm" configure:19560: $? = 0 configure:19598: result: yes configure:19608: checking for DRIGL configure:19615: $PKG_CONFIG --exists --print-errors "$dri_modules" configure:19618: $? = 0 configure:19632: $PKG_CONFIG --exists --print-errors "$dri_modules" configure:19635: $? = 0 configure:19693: result: yes configure:19875: $PKG_CONFIG --exists --print-errors "EXPAT" Package EXPAT was not found in the pkg-config search path. Perhaps you should add the directory containing `EXPAT.pc' to the PKG_CONFIG_PATH environment variable No package 'EXPAT' found configure:19878: $? = 1 configure:20378: checking for LIBUDEV configure:20385: $PKG_CONFIG --exists --print-errors "libudev" configure:20388: $? = 0 configure:20402: $PKG_CONFIG --exists --print-errors "libudev" configure:20405: $? = 0 configure:20443: result: yes configure:20473: checking for mincore configure:20473: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 configure:20473: $? = 0 configure:20473: result: yes configure:20483: checking for LIBUDEV configure:20490: $PKG_CONFIG --exists --print-errors "libudev > 150" configure:20493: $? = 0 configure:20548: result: yes configure:20699: checking for XVMC configure:20706: $PKG_CONFIG --exists --print-errors "xvmc >= 1.0.6 x11-xcb xcb-dri2 >= 1.8" configure:20709: $? = 0 configure:20723: $PKG_CONFIG --exists --print-errors "xvmc >= 1.0.6 x11-xcb xcb-dri2 >= 1.8" configure:20726: $? = 0 configure:20784: result: yes configure:20802: checking for VDPAU configure:20809: $PKG_CONFIG --exists --print-errors "vdpau >= 0.4.1 x11-xcb xcb-dri2 >= 1.8" configure:20812: $? = 0 configure:20826: $PKG_CONFIG --exists --print-errors "vdpau >= 0.4.1 x11-xcb xcb-dri2 >= 1.8" configure:20829: $? = 0 configure:20887: result: yes configure:20929: $PKG_CONFIG --exists --print-errors "libclc" configure:20932: $? = 0 configure:21178: checking for XCB_DRI2 configure:21185: $PKG_CONFIG --exists --print-errors "x11-xcb xcb-dri2 >= 1.8 xcb-xfixes" configure:21188: $? = 0 configure:21202: $PKG_CONFIG --exists --print-errors "x11-xcb xcb-dri2 >= 1.8 xcb-xfixes" configure:21205: $? = 0 configure:21263: result: yes configure:21559: checking for x86_64-pc-linux-gnu-llvm-config configure:21577: found /usr/bin/x86_64-pc-linux-gnu-llvm-config configure:21589: result: /usr/bin/x86_64-pc-linux-gnu-llvm-config configure:21666: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 configure:21666: $? = 0 configure:21666: ./conftest configure:21666: $? = 0 configure:21670: x86_64-pc-linux-gnu-gcc -o conftest -march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp -Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu conftest.c >&5 configure:21670: $? = 0 configure:21670: ./conftest configure:21670: $? = 0 configure:23268: checking that generated files are newer than configure configure:23274: result: done configure:23581: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by Mesa config.status 10.0.4, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on iqgryn config.status:1472: creating Makefile config.status:1472: creating src/Makefile config.status:1472: creating src/egl/Makefile config.status:1472: creating src/egl/drivers/Makefile config.status:1472: creating src/egl/drivers/dri2/Makefile config.status:1472: creating src/egl/drivers/glx/Makefile config.status:1472: creating src/egl/main/Makefile config.status:1472: creating src/egl/main/egl.pc config.status:1472: creating src/egl/wayland/Makefile config.status:1472: creating src/egl/wayland/wayland-drm/Makefile config.status:1472: creating src/egl/wayland/wayland-egl/Makefile config.status:1472: creating src/egl/wayland/wayland-egl/wayland-egl.pc config.status:1472: creating src/gallium/auxiliary/Makefile config.status:1472: creating src/gallium/auxiliary/pipe-loader/Makefile config.status:1472: creating src/gallium/drivers/Makefile config.status:1472: creating src/gallium/drivers/freedreno/Makefile config.status:1472: creating src/gallium/drivers/freedreno/a2xx/Makefile config.status:1472: creating src/gallium/drivers/freedreno/a3xx/Makefile config.status:1472: creating src/gallium/drivers/galahad/Makefile config.status:1472: creating src/gallium/drivers/i915/Makefile config.status:1472: creating src/gallium/drivers/identity/Makefile config.status:1472: creating src/gallium/drivers/ilo/Makefile config.status:1472: creating src/gallium/drivers/llvmpipe/Makefile config.status:1472: creating src/gallium/drivers/noop/Makefile config.status:1472: creating src/gallium/drivers/nouveau/Makefile config.status:1472: creating src/gallium/drivers/r300/Makefile config.status:1472: creating src/gallium/drivers/r600/Makefile config.status:1472: creating src/gallium/drivers/radeon/Makefile config.status:1472: creating src/gallium/drivers/radeonsi/Makefile config.status:1472: creating src/gallium/drivers/rbug/Makefile config.status:1472: creating src/gallium/drivers/softpipe/Makefile config.status:1472: creating src/gallium/drivers/svga/Makefile config.status:1472: creating src/gallium/drivers/trace/Makefile config.status:1472: creating src/gallium/state_trackers/Makefile config.status:1472: creating src/gallium/state_trackers/clover/Makefile config.status:1472: creating src/gallium/state_trackers/dri/Makefile config.status:1472: creating src/gallium/state_trackers/dri/drm/Makefile config.status:1472: creating src/gallium/state_trackers/dri/sw/Makefile config.status:1472: creating src/gallium/state_trackers/egl/Makefile config.status:1472: creating src/gallium/state_trackers/gbm/Makefile config.status:1472: creating src/gallium/state_trackers/glx/xlib/Makefile config.status:1472: creating src/gallium/state_trackers/osmesa/Makefile config.status:1472: creating src/gallium/state_trackers/vdpau/Makefile config.status:1472: creating src/gallium/state_trackers/vega/Makefile config.status:1472: creating src/gallium/state_trackers/xa/Makefile config.status:1472: creating src/gallium/state_trackers/xvmc/Makefile config.status:1472: creating src/gallium/targets/Makefile config.status:1472: creating src/gallium/targets/dri-freedreno/Makefile config.status:1472: creating src/gallium/targets/dri-i915/Makefile config.status:1472: creating src/gallium/targets/dri-ilo/Makefile config.status:1472: creating src/gallium/targets/dri-nouveau/Makefile config.status:1472: creating src/gallium/targets/dri-swrast/Makefile config.status:1472: creating src/gallium/targets/dri-vmwgfx/Makefile config.status:1472: creating src/gallium/targets/egl-static/Makefile config.status:1472: creating src/gallium/targets/gbm/Makefile config.status:1472: creating src/gallium/targets/opencl/Makefile config.status:1472: creating src/gallium/targets/osmesa/Makefile config.status:1472: creating src/gallium/targets/osmesa/osmesa.pc config.status:1472: creating src/gallium/targets/pipe-loader/Makefile config.status:1472: creating src/gallium/targets/radeonsi/dri/Makefile config.status:1472: creating src/gallium/targets/radeonsi/vdpau/Makefile config.status:1472: creating src/gallium/targets/r300/dri/Makefile config.status:1472: creating src/gallium/targets/r600/dri/Makefile config.status:1472: creating src/gallium/targets/r600/vdpau/Makefile config.status:1472: creating src/gallium/targets/r600/xvmc/Makefile config.status:1472: creating src/gallium/targets/libgl-xlib/Makefile config.status:1472: creating src/gallium/targets/vdpau-nouveau/Makefile config.status:1472: creating src/gallium/targets/xa-vmwgfx/Makefile config.status:1472: creating src/gallium/targets/xa-vmwgfx/xatracker.pc config.status:1472: creating src/gallium/targets/xvmc-nouveau/Makefile config.status:1472: creating src/gallium/tests/trivial/Makefile config.status:1472: creating src/gallium/tests/unit/Makefile config.status:1472: creating src/gallium/winsys/Makefile config.status:1472: creating src/gallium/winsys/freedreno/drm/Makefile config.status:1472: creating src/gallium/winsys/i915/drm/Makefile config.status:1472: creating src/gallium/winsys/i915/sw/Makefile config.status:1472: creating src/gallium/winsys/intel/drm/Makefile config.status:1472: creating src/gallium/winsys/nouveau/drm/Makefile config.status:1472: creating src/gallium/winsys/radeon/drm/Makefile config.status:1472: creating src/gallium/winsys/svga/drm/Makefile config.status:1472: creating src/gallium/winsys/sw/dri/Makefile config.status:1472: creating src/gallium/winsys/sw/fbdev/Makefile config.status:1472: creating src/gallium/winsys/sw/null/Makefile config.status:1472: creating src/gallium/winsys/sw/wayland/Makefile config.status:1472: creating src/gallium/winsys/sw/wrapper/Makefile config.status:1472: creating src/gallium/winsys/sw/xlib/Makefile config.status:1472: creating src/gbm/Makefile config.status:1472: creating src/gbm/main/gbm.pc config.status:1472: creating src/glsl/Makefile config.status:1472: creating src/glx/Makefile config.status:1472: creating src/glx/tests/Makefile config.status:1472: creating src/gtest/Makefile config.status:1472: creating src/mapi/Makefile config.status:1472: creating src/mapi/es1api/Makefile config.status:1472: creating src/mapi/es1api/glesv1_cm.pc config.status:1472: creating src/mapi/es2api/Makefile config.status:1472: creating src/mapi/es2api/glesv2.pc config.status:1472: creating src/mapi/glapi/Makefile config.status:1472: creating src/mapi/glapi/gen/Makefile config.status:1472: creating src/mapi/glapi/tests/Makefile config.status:1472: creating src/mapi/shared-glapi/Makefile config.status:1472: creating src/mapi/shared-glapi/tests/Makefile config.status:1472: creating src/mapi/vgapi/Makefile config.status:1472: creating src/mapi/vgapi/vg.pc config.status:1472: creating src/mesa/Makefile config.status:1472: creating src/mesa/gl.pc config.status:1472: creating src/mesa/drivers/dri/dri.pc config.status:1472: creating src/mesa/drivers/dri/common/Makefile config.status:1472: creating src/mesa/drivers/dri/common/xmlpool/Makefile config.status:1472: creating src/mesa/drivers/dri/i915/Makefile config.status:1472: creating src/mesa/drivers/dri/i965/Makefile config.status:1472: creating src/mesa/drivers/dri/Makefile config.status:1472: creating src/mesa/drivers/dri/nouveau/Makefile config.status:1472: creating src/mesa/drivers/dri/r200/Makefile config.status:1472: creating src/mesa/drivers/dri/radeon/Makefile config.status:1472: creating src/mesa/drivers/dri/swrast/Makefile config.status:1472: creating src/mesa/drivers/osmesa/Makefile config.status:1472: creating src/mesa/drivers/osmesa/osmesa.pc config.status:1472: creating src/mesa/drivers/x11/Makefile config.status:1472: creating src/mesa/main/tests/Makefile config.status:1472: creating src/mesa/main/tests/hash_table/Makefile config.status:1644: executing depfiles commands config.status:1644: executing libtool commands ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=x86_64-pc-linux-gnu ac_cv_c_compiler_gnu=yes ac_cv_cxx_compiler_gnu=yes ac_cv_env_CCASFLAGS_set= ac_cv_env_CCASFLAGS_value= ac_cv_env_CCAS_set= ac_cv_env_CCAS_value= ac_cv_env_CCC_set= ac_cv_env_CCC_value= ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value='-march=native -O2 -pipe -ggdb' ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_CXXCPP_set= ac_cv_env_CXXCPP_value= ac_cv_env_CXXFLAGS_set=set ac_cv_env_CXXFLAGS_value='-march=native -O2 -pipe -ggdb' ac_cv_env_CXX_set= ac_cv_env_CXX_value= ac_cv_env_DRI2PROTO_CFLAGS_set= ac_cv_env_DRI2PROTO_CFLAGS_value= ac_cv_env_DRI2PROTO_LIBS_set= ac_cv_env_DRI2PROTO_LIBS_value= ac_cv_env_DRIGL_CFLAGS_set= ac_cv_env_DRIGL_CFLAGS_value= ac_cv_env_DRIGL_LIBS_set= ac_cv_env_DRIGL_LIBS_value= ac_cv_env_EXPAT_CFLAGS_set= ac_cv_env_EXPAT_CFLAGS_value= ac_cv_env_EXPAT_LIBS_set= ac_cv_env_EXPAT_LIBS_value= ac_cv_env_FREEDRENO_CFLAGS_set= ac_cv_env_FREEDRENO_CFLAGS_value= ac_cv_env_FREEDRENO_LIBS_set= ac_cv_env_FREEDRENO_LIBS_value= ac_cv_env_GALLIUM_PIPE_LOADER_XCB_CFLAGS_set= ac_cv_env_GALLIUM_PIPE_LOADER_XCB_CFLAGS_value= ac_cv_env_GALLIUM_PIPE_LOADER_XCB_LIBS_set= ac_cv_env_GALLIUM_PIPE_LOADER_XCB_LIBS_value= ac_cv_env_GLPROTO_CFLAGS_set= ac_cv_env_GLPROTO_CFLAGS_value= ac_cv_env_GLPROTO_LIBS_set= ac_cv_env_GLPROTO_LIBS_value= ac_cv_env_INTEL_CFLAGS_set= ac_cv_env_INTEL_CFLAGS_value= ac_cv_env_INTEL_LIBS_set= ac_cv_env_INTEL_LIBS_value= ac_cv_env_LDFLAGS_set=set ac_cv_env_LDFLAGS_value='-Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu' ac_cv_env_LIBDRM_CFLAGS_set= ac_cv_env_LIBDRM_CFLAGS_value= ac_cv_env_LIBDRM_LIBS_set= ac_cv_env_LIBDRM_LIBS_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_LIBUDEV_CFLAGS_set= ac_cv_env_LIBUDEV_CFLAGS_value= ac_cv_env_LIBUDEV_LIBS_set= ac_cv_env_LIBUDEV_LIBS_value= ac_cv_env_NOUVEAU_CFLAGS_set= ac_cv_env_NOUVEAU_CFLAGS_value= ac_cv_env_NOUVEAU_LIBS_set= ac_cv_env_NOUVEAU_LIBS_value= ac_cv_env_PKG_CONFIG_LIBDIR_set= ac_cv_env_PKG_CONFIG_LIBDIR_value= ac_cv_env_PKG_CONFIG_PATH_set=set ac_cv_env_PKG_CONFIG_PATH_value=/var/tmp/portage/media-libs/mesa-10.0.4/temp/python2.7/pkgconfig ac_cv_env_PKG_CONFIG_set= ac_cv_env_PKG_CONFIG_value= ac_cv_env_RADEON_CFLAGS_set= ac_cv_env_RADEON_CFLAGS_value= ac_cv_env_RADEON_LIBS_set= ac_cv_env_RADEON_LIBS_value= ac_cv_env_VDPAU_CFLAGS_set= ac_cv_env_VDPAU_CFLAGS_value= ac_cv_env_VDPAU_LIBS_set= ac_cv_env_VDPAU_LIBS_value= ac_cv_env_WAYLAND_CFLAGS_set= ac_cv_env_WAYLAND_CFLAGS_value= ac_cv_env_WAYLAND_LIBS_set= ac_cv_env_WAYLAND_LIBS_value= ac_cv_env_XCB_DRI2_CFLAGS_set= ac_cv_env_XCB_DRI2_CFLAGS_value= ac_cv_env_XCB_DRI2_LIBS_set= ac_cv_env_XCB_DRI2_LIBS_value= ac_cv_env_XF86VIDMODE_CFLAGS_set= ac_cv_env_XF86VIDMODE_CFLAGS_value= ac_cv_env_XF86VIDMODE_LIBS_set= ac_cv_env_XF86VIDMODE_LIBS_value= ac_cv_env_XLIBGL_CFLAGS_set= ac_cv_env_XLIBGL_CFLAGS_value= ac_cv_env_XLIBGL_LIBS_set= ac_cv_env_XLIBGL_LIBS_value= ac_cv_env_XVMC_CFLAGS_set= ac_cv_env_XVMC_CFLAGS_value= ac_cv_env_XVMC_LIBS_set= ac_cv_env_XVMC_LIBS_value= ac_cv_env_YACC_set= ac_cv_env_YACC_value= ac_cv_env_YFLAGS_set= ac_cv_env_YFLAGS_value= ac_cv_env_build_alias_set=set ac_cv_env_build_alias_value=x86_64-pc-linux-gnu ac_cv_env_host_alias_set=set ac_cv_env_host_alias_value=x86_64-pc-linux-gnu ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_func_clock_gettime=yes ac_cv_func_dlopen=no ac_cv_func_mincore=yes ac_cv_func_posix_memalign=yes ac_cv_header_dlfcn_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_memory_h=yes ac_cv_header_stdc=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_unistd_h=yes ac_cv_host=x86_64-pc-linux-gnu ac_cv_lib_dl_dlopen=yes ac_cv_lib_lex=-lfl ac_cv_objext=o ac_cv_path_EGREP='/bin/grep -E' ac_cv_path_FGREP='/bin/grep -F' ac_cv_path_GREP=/bin/grep ac_cv_path_LLVM_CONFIG=/usr/bin/x86_64-pc-linux-gnu-llvm-config ac_cv_path_PERL=/usr/bin/perl ac_cv_path_PKG_CONFIG=/usr/bin/x86_64-pc-linux-gnu-pkg-config ac_cv_path_SED=/bin/sed ac_cv_path_install='/usr/lib64/portage/bin/ebuild-helpers/xattr/install -c' ac_cv_path_mkdir=/bin/mkdir ac_cv_prog_AR=x86_64-pc-linux-gnu-ar ac_cv_prog_AWK=gawk ac_cv_prog_CC=x86_64-pc-linux-gnu-gcc ac_cv_prog_CPP='x86_64-pc-linux-gnu-gcc -E' ac_cv_prog_CXX=x86_64-pc-linux-gnu-g++ ac_cv_prog_CXXCPP='x86_64-pc-linux-gnu-g++ -E' ac_cv_prog_INDENT=cat ac_cv_prog_LEX=flex ac_cv_prog_MAKE=gmake ac_cv_prog_OBJDUMP=x86_64-pc-linux-gnu-objdump ac_cv_prog_PYTHON2=/usr/bin/python2.7 ac_cv_prog_RANLIB=x86_64-pc-linux-gnu-ranlib ac_cv_prog_STRIP=x86_64-pc-linux-gnu-strip ac_cv_prog_YACC='bison -y' ac_cv_prog_cc_c89= ac_cv_prog_cc_g=yes ac_cv_prog_cc_x86_64_pc_linux_gnu_gcc_c_o=yes ac_cv_prog_cxx_g=yes ac_cv_prog_lex_root=lex.yy ac_cv_prog_lex_yytext_pointer=yes ac_cv_prog_make_make_set=yes ac_cv_target=x86_64-pc-linux-gnu am_cv_CCAS_dependencies_compiler_type=none am_cv_CC_dependencies_compiler_type=none am_cv_CXX_dependencies_compiler_type=none am_cv_ar_interface=ar am_cv_make_support_nested_variables=yes ax_cv_PTHREAD_PRIO_INHERIT=no ax_cv_check_cflags___msse4_1=yes ax_cv_prog_bison=yes ax_cv_prog_flex=yes lt_cv_ar_at_file=@ lt_cv_archive_cmds_need_lc=no lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_ld_reload_flag=-r lt_cv_nm_interface='BSD nm' lt_cv_objdir=.libs lt_cv_path_LD=/usr/x86_64-pc-linux-gnu/bin/ld lt_cv_path_LDCXX='/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64' lt_cv_path_NM='/usr/bin/x86_64-pc-linux-gnu-nm -B' lt_cv_path_mainfest_tool=no lt_cv_prog_compiler_c_o=yes lt_cv_prog_compiler_c_o_CXX=yes lt_cv_prog_compiler_pic='-fPIC -DPIC' lt_cv_prog_compiler_pic_CXX='-fPIC -DPIC' lt_cv_prog_compiler_pic_works=yes lt_cv_prog_compiler_pic_works_CXX=yes lt_cv_prog_compiler_rtti_exceptions=no lt_cv_prog_compiler_static_works=yes lt_cv_prog_compiler_static_works_CXX=yes lt_cv_prog_gnu_ld=yes lt_cv_prog_gnu_ldcxx=yes lt_cv_sharedlib_from_linklib_cmd='printf %s\n' lt_cv_shlibpath_overrides_runpath=yes lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | sed '\''/ __gnu_lto/d'\''' lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\''' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"lib\2", (void *) \&\2},/p'\''' lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\''' lt_cv_sys_max_cmd_len=1572864 lt_cv_to_host_file_cmd=func_convert_file_noop lt_cv_to_tool_file_cmd=func_convert_file_noop pkg_cv_DRI2PROTO_CFLAGS= pkg_cv_DRI2PROTO_LIBS= pkg_cv_DRIGL_CFLAGS= pkg_cv_DRIGL_LIBS='-lXext -lXdamage -lXfixes -lX11-xcb -lX11 -lxcb-glx -lxcb-dri2 -lxcb -lXxf86vm ' pkg_cv_GLPROTO_CFLAGS= pkg_cv_GLPROTO_LIBS= pkg_cv_LIBDRM_CFLAGS='-I/usr/include/libdrm ' pkg_cv_LIBDRM_LIBS='-ldrm ' pkg_cv_LIBUDEV_CFLAGS= pkg_cv_LIBUDEV_LIBS='-ludev ' pkg_cv_VDPAU_CFLAGS= pkg_cv_VDPAU_LIBS='-lvdpau -lX11-xcb -lX11 -lxcb-dri2 -lxcb ' pkg_cv_XCB_DRI2_CFLAGS= pkg_cv_XCB_DRI2_LIBS='-lX11-xcb -lX11 -lxcb-dri2 -lxcb-xfixes -lxcb-render -lxcb-shape -lxcb ' pkg_cv_XF86VIDMODE_CFLAGS= pkg_cv_XF86VIDMODE_LIBS='-lXxf86vm ' pkg_cv_XVMC_CFLAGS= pkg_cv_XVMC_LIBS='-lXvMC -lXv -lX11-xcb -lX11 -lxcb-dri2 -lxcb ' ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /var/tmp/portage/media-libs/mesa-10.0.4/work/Mesa-10.0.4-amd64/bin/missing aclocal-1.13' AMDEPBACKSLASH='' AMDEP_FALSE='' AMDEP_TRUE='#' AMTAR='$${TAR-tar}' AM_BACKSLASH='\' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' AM_DEFAULT_VERBOSITY='1' AM_V='$(V)' AR='x86_64-pc-linux-gnu-ar' AUTOCONF='${SHELL} /var/tmp/portage/media-libs/mesa-10.0.4/work/Mesa-10.0.4-amd64/bin/missing autoconf' AUTOHEADER='${SHELL} /var/tmp/portage/media-libs/mesa-10.0.4/work/Mesa-10.0.4-amd64/bin/missing autoheader' AUTOMAKE='${SHELL} /var/tmp/portage/media-libs/mesa-10.0.4/work/Mesa-10.0.4-amd64/bin/missing automake-1.13' AWK='gawk' BUILD_SHARED_FALSE='#' BUILD_SHARED_TRUE='' CC='x86_64-pc-linux-gnu-gcc' CCAS='x86_64-pc-linux-gnu-gcc' CCASDEPMODE='depmode=none' CCASFLAGS='-march=native -O2 -pipe -ggdb' CCDEPMODE='depmode=none' CFLAGS='-march=native -O2 -pipe -ggdb -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-strict-aliasing -fno-builtin-memcmp ' CLANG_RESOURCE_DIR='/usr/lib/clang/3.3' CLOCK_LIB='' CPP='x86_64-pc-linux-gnu-gcc -E' CPPFLAGS='' CXX='x86_64-pc-linux-gnu-g++' CXXCPP='x86_64-pc-linux-gnu-g++ -E' CXXDEPMODE='depmode=none' CXXFLAGS='-march=native -O2 -pipe -ggdb -Wall -fno-strict-aliasing -fno-builtin-memcmp ' CYGPATH_W='echo' DEFINES=' -D_GNU_SOURCE -DHAVE_PTHREAD -DTEXTURE_FLOAT_ENABLED -DHAVE_DLOPEN -DHAVE_POSIX_MEMALIGN -DGLX_INDIRECT_RENDERING -DGLX_DIRECT_RENDERING -DGLX_USE_TLS -DHAVE_PTHREAD -DUSE_EXTERNAL_DXTN_LIB=1 -DHAVE_ALIAS -DHAVE_MINCORE -DHAVE_LIBUDEV -DHAVE_LLVM=0x0303' DEFS='-DPACKAGE_NAME=\"Mesa\" -DPACKAGE_TARNAME=\"mesa\" -DPACKAGE_VERSION=\"10.0.4\" -DPACKAGE_STRING=\"Mesa\ 10.0.4\" -DPACKAGE_BUGREPORT=\"https://bugs.freedesktop.org/enter_bug.cgi\?product=Mesa\" -DPACKAGE_URL=\"\" -DPACKAGE=\"mesa\" -DVERSION=\"10.0.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DYYTEXT_POINTER=1 -DHAVE_CLOCK_GETTIME=1 -DHAVE_PTHREAD=1' DEPDIR='.deps' DLLTOOL='false' DLOPEN_LIBS='-ldl' DRI2PROTO_CFLAGS='' DRI2PROTO_LIBS='' DRICOMMON_NEED_LIBDRM_FALSE='#' DRICOMMON_NEED_LIBDRM_TRUE='' DRIGL_CFLAGS='' DRIGL_LIBS='-lXext -lXdamage -lXfixes -lX11-xcb -lX11 -lxcb-glx -lxcb-dri2 -lxcb -lXxf86vm ' DRI_DRIVER_INSTALL_DIR='${libdir}/dri' DRI_DRIVER_LDFLAGS='-module -avoid-version -shared -Wl,-Bsymbolic' DRI_DRIVER_SEARCH_DIR='${DRI_DRIVER_INSTALL_DIR}' DRI_LIB_DEPS=' -ldrm -lexpat -lm -lpthread -ldl' DRI_PC_REQ_PRIV='libdrm >= 2.4.24' DSYMUTIL='' DUMPBIN='' ECHO_C='' ECHO_N='-n' ECHO_T='' EGL_CFLAGS='' EGL_CLIENT_APIS=' $(VG_LIB) $(GL_LIB)' EGL_DRIVER_INSTALL_DIR='${libdir}/egl' EGL_LIB_DEPS='-ldl -lpthread' EGL_LIB_GLOB='lib$(EGL_LIB).*so*' EGL_LIB_NAME='lib$(EGL_LIB).so' EGL_NATIVE_PLATFORM='_EGL_PLATFORM_X11' EGREP='/bin/grep -E' ELF_LIB='' EXEEXT='' EXPAT_CFLAGS='' EXPAT_LIBS='-lexpat' FGREP='/bin/grep -F' FREEDRENO_CFLAGS='' FREEDRENO_LIBS='' GALLIUM_DRI_LIB_DEPS=' -ldrm -lexpat -lm -lpthread -ldl' GALLIUM_PIPE_LOADER_DEFINES='' GALLIUM_PIPE_LOADER_LIBS='' GALLIUM_PIPE_LOADER_XCB_CFLAGS='' GALLIUM_PIPE_LOADER_XCB_LIBS='' GBM_PC_LIB_PRIV='-ldl' GBM_PC_REQ_PRIV='libudev' GEN_ASM_OFFSETS_FALSE='' GEN_ASM_OFFSETS_TRUE='#' GLAPI_LIB_GLOB='lib$(GLAPI_LIB).*so*' GLAPI_LIB_NAME='lib$(GLAPI_LIB).so' GLESv1_CM_LIB_DEPS='-ldrm -lm -lpthread -ldl' GLESv1_CM_LIB_GLOB='lib$(GLESv1_CM_LIB).*so*' GLESv1_CM_LIB_NAME='lib$(GLESv1_CM_LIB).so' GLESv1_CM_PC_LIB_PRIV='-lm -lpthread -ldl' GLESv2_LIB_DEPS='-ldrm -lm -lpthread -ldl' GLESv2_LIB_GLOB='lib$(GLESv2_LIB).*so*' GLESv2_LIB_NAME='lib$(GLESv2_LIB).so' GLESv2_PC_LIB_PRIV='-lm -lpthread -ldl' GLPROTO_CFLAGS='' GLPROTO_LIBS='' GLX_TLS='yes' GL_LIB='GL' GL_LIB_DEPS='-lXext -lXdamage -lXfixes -lX11-xcb -lX11 -lxcb-glx -lxcb-dri2 -lxcb -lXxf86vm -ldrm -lm -lpthread -ldl' GL_LIB_GLOB='lib$(GL_LIB).*so*' GL_LIB_NAME='lib$(GL_LIB).so' GL_PC_CFLAGS='' GL_PC_LIB_PRIV='-lm -lpthread -ldl' GL_PC_REQ_PRIV=' libdrm >= 2.4.24 x11 xext xdamage xfixes x11-xcb xcb-glx >= 1.8.1 xcb-dri2 >= 1.8 xxf86vm' GREP='/bin/grep' HAVE_CLOVER_FALSE='#' HAVE_CLOVER_ICD_FALSE='' HAVE_CLOVER_ICD_TRUE='#' HAVE_CLOVER_TRUE='' HAVE_DRI_FALSE='#' HAVE_DRI_GLX_FALSE='#' HAVE_DRI_GLX_TRUE='' HAVE_DRI_TRUE='' HAVE_DRM_LOADER_GALLIUM_FALSE='' HAVE_DRM_LOADER_GALLIUM_TRUE='#' HAVE_EGL_DRIVER_DRI2_FALSE='#' HAVE_EGL_DRIVER_DRI2_TRUE='' HAVE_EGL_DRIVER_GLX_FALSE='#' HAVE_EGL_DRIVER_GLX_TRUE='' HAVE_EGL_FALSE='#' HAVE_EGL_PLATFORM_DRM_FALSE='#' HAVE_EGL_PLATFORM_DRM_TRUE='' HAVE_EGL_PLATFORM_FBDEV_FALSE='' HAVE_EGL_PLATFORM_FBDEV_TRUE='#' HAVE_EGL_PLATFORM_NULL_FALSE='' HAVE_EGL_PLATFORM_NULL_TRUE='#' HAVE_EGL_PLATFORM_WAYLAND_FALSE='' HAVE_EGL_PLATFORM_WAYLAND_TRUE='#' HAVE_EGL_PLATFORM_X11_FALSE='#' HAVE_EGL_PLATFORM_X11_TRUE='' HAVE_EGL_TRUE='' HAVE_GALLIUM_COMPUTE_FALSE='#' HAVE_GALLIUM_COMPUTE_TRUE='' HAVE_GALLIUM_EGL_FALSE='#' HAVE_GALLIUM_EGL_TRUE='' HAVE_GALLIUM_FALSE='#' HAVE_GALLIUM_FREEDRENO_FALSE='' HAVE_GALLIUM_FREEDRENO_TRUE='#' HAVE_GALLIUM_GBM_FALSE='#' HAVE_GALLIUM_GBM_TRUE='' HAVE_GALLIUM_I915_FALSE='' HAVE_GALLIUM_I915_TRUE='#' HAVE_GALLIUM_ILO_FALSE='' HAVE_GALLIUM_ILO_TRUE='#' HAVE_GALLIUM_LLVMPIPE_FALSE='#' HAVE_GALLIUM_LLVMPIPE_TRUE='' HAVE_GALLIUM_NOUVEAU_FALSE='' HAVE_GALLIUM_NOUVEAU_TRUE='#' HAVE_GALLIUM_OSMESA_FALSE='' HAVE_GALLIUM_OSMESA_TRUE='#' HAVE_GALLIUM_R300_FALSE='' HAVE_GALLIUM_R300_TRUE='#' HAVE_GALLIUM_R600_FALSE='' HAVE_GALLIUM_R600_TRUE='#' HAVE_GALLIUM_RADEONSI_FALSE='' HAVE_GALLIUM_RADEONSI_TRUE='#' HAVE_GALLIUM_SOFTPIPE_FALSE='#' HAVE_GALLIUM_SOFTPIPE_TRUE='' HAVE_GALLIUM_SVGA_FALSE='' HAVE_GALLIUM_SVGA_TRUE='#' HAVE_GALLIUM_TESTS_FALSE='' HAVE_GALLIUM_TESTS_TRUE='#' HAVE_GALLIUM_TRUE='' HAVE_GBM_FALSE='#' HAVE_GBM_TRUE='' HAVE_I915_DRI_FALSE='' HAVE_I915_DRI_TRUE='#' HAVE_I965_DRI_FALSE='' HAVE_I965_DRI_TRUE='#' HAVE_LOADER_GALLIUM_FALSE='#' HAVE_LOADER_GALLIUM_TRUE='' HAVE_MESA_LLVM_FALSE='#' HAVE_MESA_LLVM_TRUE='' HAVE_NOUVEAU_DRI_FALSE='' HAVE_NOUVEAU_DRI_TRUE='#' HAVE_OPENGL_ES1_FALSE='#' HAVE_OPENGL_ES1_TRUE='' HAVE_OPENGL_ES2_FALSE='#' HAVE_OPENGL_ES2_TRUE='' HAVE_OPENGL_FALSE='#' HAVE_OPENGL_TRUE='' HAVE_OPENVG_FALSE='#' HAVE_OPENVG_TRUE='' HAVE_OSMESA_FALSE='#' HAVE_OSMESA_TRUE='' HAVE_R200_DRI_FALSE='' HAVE_R200_DRI_TRUE='#' HAVE_RADEON_DRI_FALSE='' HAVE_RADEON_DRI_TRUE='#' HAVE_SHARED_GLAPI_FALSE='#' HAVE_SHARED_GLAPI_TRUE='' HAVE_SPARC_ASM_FALSE='' HAVE_SPARC_ASM_TRUE='#' HAVE_ST_VDPAU_FALSE='#' HAVE_ST_VDPAU_TRUE='' HAVE_ST_XA_FALSE='#' HAVE_ST_XA_TRUE='' HAVE_ST_XVMC_FALSE='#' HAVE_ST_XVMC_TRUE='' HAVE_SWRAST_DRI_FALSE='#' HAVE_SWRAST_DRI_TRUE='' HAVE_X11_DRIVER_FALSE='' HAVE_X11_DRIVER_TRUE='#' HAVE_X86_64_ASM_FALSE='' HAVE_X86_64_ASM_TRUE='#' HAVE_X86_ASM_FALSE='' HAVE_X86_ASM_TRUE='#' HAVE_XF86VIDMODE='yes' HAVE_XF86VIDMODE_FALSE='#' HAVE_XF86VIDMODE_TRUE='' INDENT='cat' INDENT_FLAGS='' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' INTEL_CFLAGS='' INTEL_LIBS='' LD='/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64' LDFLAGS='-Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu' LEX='flex' LEXLIB='-lfl' LEX_OUTPUT_ROOT='lex.yy' LIBCLC_INCLUDEDIR='/usr/include' LIBCLC_LIBEXECDIR='/usr/lib/clc' LIBDRM_CFLAGS='-I/usr/include/libdrm ' LIBDRM_LIBS='-ldrm ' LIBOBJS='' LIBS='' LIBTOOL='$(SHELL) $(top_builddir)/libtool' LIBUDEV_CFLAGS='' LIBUDEV_LIBS='-ludev ' LIB_DIR='lib64' LIPO='' LLVM_BINDIR='/usr/bin' LLVM_CFLAGS='-I/usr/include -D_GNU_SOURCE -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS' LLVM_CONFIG='/usr/bin/x86_64-pc-linux-gnu-llvm-config' LLVM_CPPFLAGS='-I/usr/include -D_GNU_SOURCE -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS' LLVM_CXXFLAGS='-I/usr/include -D_GNU_SOURCE -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS -fvisibility-inlines-hidden -fno-exceptions -fPIC -Woverloaded-virtual -Wcast-qual' LLVM_INCLUDEDIR='/usr/include' LLVM_LDFLAGS='-L/usr/lib64 -lz -lpthread -lffi -ldl -lm ' LLVM_LIBDIR='/usr/lib64' LLVM_LIBS='-lLLVMOption -lLLVMIRReader -lLLVMBitReader -lLLVMAsmParser -lLLVMInstrumentation -lLLVMLinker -lLLVMipo -lLLVMVectorize -lLLVMMCJIT -lLLVMBitWriter -lLLVMX86Disassembler -lLLVMX86AsmParser -lLLVMX86CodeGen -lLLVMSelectionDAG -lLLVMAsmPrinter -lLLVMMCParser -lLLVMX86Desc -lLLVMX86Info -lLLVMX86AsmPrinter -lLLVMX86Utils -lLLVMJIT -lLLVMRuntimeDyld -lLLVMExecutionEngine -lLLVMCodeGen -lLLVMObjCARCOpts -lLLVMScalarOpts -lLLVMInstCombine -lLLVMTransformUtils -lLLVMipa -lLLVMAnalysis -lLLVMTarget -lLLVMMC -lLLVMObject -lLLVMCore -lLLVMSupport' LLVM_VERSION='3.3' LN_S='ln -s' LTLIBOBJS='' MAKE='gmake' MAKEINFO='${SHELL} /var/tmp/portage/media-libs/mesa-10.0.4/work/Mesa-10.0.4-amd64/bin/missing makeinfo' MANIFEST_TOOL=':' MESA_LLVM='1' MKDIR_P='/bin/mkdir -p' NEED_GALLIUM_LLVMPIPE_DRIVER_FALSE='#' NEED_GALLIUM_LLVMPIPE_DRIVER_TRUE='' NEED_GALLIUM_LOADER_FALSE='#' NEED_GALLIUM_LOADER_TRUE='' NEED_GALLIUM_SOFTPIPE_DRIVER_FALSE='#' NEED_GALLIUM_SOFTPIPE_DRIVER_TRUE='' NEED_LIBMESA_FALSE='#' NEED_LIBMESA_TRUE='' NEED_MEGADRIVER_FALSE='#' NEED_MEGADRIVER_TRUE='' NEED_NONNULL_WINSYS_FALSE='#' NEED_NONNULL_WINSYS_TRUE='' NEED_OPENGL_COMMON_FALSE='#' NEED_OPENGL_COMMON_TRUE='' NEED_RADEON_DRM_WINSYS_FALSE='' NEED_RADEON_DRM_WINSYS_TRUE='#' NEED_RADEON_LLVM_FALSE='' NEED_RADEON_LLVM_TRUE='#' NEED_WINSYS_WRAPPER_FALSE='' NEED_WINSYS_WRAPPER_TRUE='#' NEED_WINSYS_XLIB_FALSE='#' NEED_WINSYS_XLIB_TRUE='' NM='/usr/bin/x86_64-pc-linux-gnu-nm -B' NMEDIT='' NOUVEAU_CFLAGS='' NOUVEAU_LIBS='' OBJDUMP='x86_64-pc-linux-gnu-objdump' OBJEXT='o' OPENCL_LIBNAME='OpenCL' OPENCL_LIB_INSTALL_DIR='/usr/lib64/OpenCL/vendors/mesa' OSMESA_LIB='OSMesa' OSMESA_LIB_DEPS='-lm -lpthread -ldl' OSMESA_LIB_NAME='lib$(OSMESA_LIB).so' OSMESA_MESA_DEPS='' OSMESA_PC_LIB_PRIV='-lm -lpthread -ldl' OSMESA_PC_REQ='' OSMESA_VERSION='8' OTOOL64='' OTOOL='' PACKAGE='mesa' PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa' PACKAGE_NAME='Mesa' PACKAGE_STRING='Mesa 10.0.4' PACKAGE_TARNAME='mesa' PACKAGE_URL='' PACKAGE_VERSION='10.0.4' PATH_SEPARATOR=':' PERL='/usr/bin/perl' PKG_CONFIG='/usr/bin/x86_64-pc-linux-gnu-pkg-config' PKG_CONFIG_LIBDIR='' PKG_CONFIG_PATH='/var/tmp/portage/media-libs/mesa-10.0.4/temp/python2.7/pkgconfig' POSIX_SHELL='' PTHREAD_CC='x86_64-pc-linux-gnu-gcc' PTHREAD_CFLAGS='-pthread' PTHREAD_LIBS='-lpthread' PYTHON2='/usr/bin/python2.7' RADEON_CFLAGS='' RADEON_LIBS='' RANLIB='x86_64-pc-linux-gnu-ranlib' SED='/bin/sed' SELINUX_LIBS='' SET_MAKE='' SHELL='/bin/sh' SSE41_SUPPORTED_FALSE='#' SSE41_SUPPORTED_TRUE='' STRIP='x86_64-pc-linux-gnu-strip' USE_R600_LLVM_COMPILER_FALSE='' USE_R600_LLVM_COMPILER_TRUE='#' VDPAU_CFLAGS='' VDPAU_LIBS='-lvdpau -lX11-xcb -lX11 -lxcb-dri2 -lxcb ' VDPAU_LIB_INSTALL_DIR='${libdir}/vdpau' VDPAU_MAJOR='1' VDPAU_MINOR='0' VERSION='10.0.4' VG_LIB_DEPS=' -lpthread' VG_LIB_GLOB='lib$(VG_LIB).*so*' VG_LIB_NAME='lib$(VG_LIB).so' VG_PC_LIB_PRIV='-lm -lpthread -ldl' VISIBILITY_CFLAGS='-fvisibility=hidden' VISIBILITY_CXXFLAGS='-fvisibility=hidden' WAYLAND_CFLAGS='' WAYLAND_LIBS='' WAYLAND_SCANNER='' X11_INCLUDES=' ' XA_MAJOR='2' XA_MINOR='0' XA_TINY='0' XA_VERSION='2.0.0' XCB_DRI2_CFLAGS='' XCB_DRI2_LIBS='-lX11-xcb -lX11 -lxcb-dri2 -lxcb-xfixes -lxcb-render -lxcb-shape -lxcb ' XF86VIDMODE_CFLAGS='' XF86VIDMODE_LIBS='-lXxf86vm ' XLIBGL_CFLAGS='' XLIBGL_LIBS='' XVMC_CFLAGS='' XVMC_LIBS='-lXvMC -lXv -lX11-xcb -lX11 -lxcb-dri2 -lxcb ' XVMC_LIB_INSTALL_DIR='${libdir}' XVMC_MAJOR='1' XVMC_MINOR='0' YACC='bison' YFLAGS='' ac_ct_AR='' ac_ct_CC='' ac_ct_CXX='' ac_ct_DUMPBIN='' am__EXEEXT_FALSE='' am__EXEEXT_TRUE='#' am__fastdepCCAS_FALSE='' am__fastdepCCAS_TRUE='#' am__fastdepCC_FALSE='' am__fastdepCC_TRUE='#' am__fastdepCXX_FALSE='' am__fastdepCXX_TRUE='#' am__include='include' am__isrc='' am__leading_dot='.' am__nodep='' am__quote='' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' ax_pthread_config='' bindir='${exec_prefix}/bin' build='x86_64-pc-linux-gnu' build_alias='x86_64-pc-linux-gnu' build_cpu='x86_64' build_os='linux-gnu' build_vendor='pc' datadir='/usr/share' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='${prefix}' host='x86_64-pc-linux-gnu' host_alias='x86_64-pc-linux-gnu' host_cpu='x86_64' host_os='linux-gnu' host_vendor='pc' htmldir='${docdir}' includedir='${prefix}/include' infodir='/usr/share/info' install_sh='${SHELL} /var/tmp/portage/media-libs/mesa-10.0.4/work/Mesa-10.0.4-amd64/bin/install-sh' libdir='/usr/lib64' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='/var/lib' mandir='/usr/share/man' mkdir_p='$(MKDIR_P)' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='/usr' program_transform_name='s,x,x,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='/etc' target='x86_64-pc-linux-gnu' target_alias='' target_cpu='x86_64' target_os='linux-gnu' target_vendor='pc' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "Mesa" #define PACKAGE_TARNAME "mesa" #define PACKAGE_VERSION "10.0.4" #define PACKAGE_STRING "Mesa 10.0.4" #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" #define PACKAGE_URL "" #define PACKAGE "mesa" #define VERSION "10.0.4" #define STDC_HEADERS 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMORY_H 1 #define HAVE_STRINGS_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_UNISTD_H 1 #define HAVE_DLFCN_H 1 #define LT_OBJDIR ".libs/" #define YYTEXT_POINTER 1 #define HAVE_CLOCK_GETTIME 1 #define HAVE_PTHREAD 1 configure: exit 0