Complete build log

1376665532-install-dev-texlive_texlive-basic-2013:0::gentoo.out (text/plain), 32.87 KB, created by Christian Apeltauer on 2013-08-17 10:35:17 UTC

[32m>>>[0m Running ebuild phase killold as root:root...
[32m>>>[0m Starting builtin_killold
[32m>>>[0m Done builtin_killold
[32m>>>[0m Completed ebuild phase killold
[32m>>>[0m Running ebuild phases init saveenv as paludisbuild:paludisbuild...
[32m>>>[0m Starting builtin_init
[32m>>>[0m Done builtin_init
[32m>>>[0m Starting builtin_saveenv
[32m>>>[0m Done builtin_saveenv
[32m>>>[0m Completed ebuild phases init saveenv
[32m>>>[0m Running ebuild phases loadenv setup saveenv as root:root...
[32m>>>[0m Starting builtin_loadenv
[32m>>>[0m Done builtin_loadenv
[32m>>>[0m Starting pkg_setup
[32m>>>[0m Done pkg_setup
[32m>>>[0m Starting builtin_saveenv
[32m>>>[0m Done builtin_saveenv
[32m>>>[0m Completed ebuild phases loadenv setup saveenv
[32m>>>[0m Running ebuild phases loadenv unpack saveenv as paludisbuild:paludisbuild...
[32m>>>[0m Starting builtin_loadenv
[32m>>>[0m Done builtin_loadenv
[32m>>>[0m Starting src_unpack
>>> Unpacking texlive-module-amsfonts-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-amsfonts-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-bibtex-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-bibtex-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-cm-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-cm-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-dvipdfmx-def-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-dvipdfmx-def-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-enctex-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-enctex-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-etex-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-etex-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-etex-pkg-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-etex-pkg-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-glyphlist-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-glyphlist-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-hyph-utf8-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-hyph-utf8-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-ifluatex-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-ifluatex-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-ifxetex-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-ifxetex-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-lua-alt-getopt-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-lua-alt-getopt-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-luatex-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-luatex-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-makeindex-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-makeindex-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-metafont-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-metafont-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-mflogo-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-mflogo-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-mfware-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-mfware-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-misc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-misc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-pdftex-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-pdftex-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-plain-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-plain-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-tex-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-tex-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-texlive-common-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-texlive-common-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-texlive-docindex-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-texlive-docindex-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-texlive-en-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-texlive-en-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-texlive-msg-translations-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-texlive-msg-translations-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-texlive-scripts-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-texlive-scripts-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-collection-basic-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-collection-basic-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-amsfonts.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-amsfonts.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-bibtex.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-bibtex.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-cm.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-cm.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-enctex.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-enctex.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-etex.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-etex.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-etex-pkg.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-etex-pkg.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-hyph-utf8.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-hyph-utf8.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-ifluatex.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-ifluatex.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-ifxetex.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-ifxetex.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-lua-alt-getopt.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-lua-alt-getopt.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-luatex.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-luatex.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-makeindex.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-makeindex.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-metafont.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-metafont.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-mflogo.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-mflogo.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-mfware.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-mfware.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-pdftex.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-pdftex.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-tex.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-tex.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-texlive-common.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-texlive-common.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-texlive-docindex.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-texlive-docindex.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-texlive-en.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-texlive-en.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
>>> Unpacking texlive-module-texlive-scripts.doc-2013.tar.xz to /var/tmp/paludis/dev-texlive-texlive-basic-2013/work
xz -dc /var/distfiles/texlive-module-texlive-scripts.doc-2013.tar.xz | strip_tar_corruption | tar xf - --no-same-owner
[32m>>>[0m Done src_unpack
[32m>>>[0m Starting builtin_saveenv
[32m>>>[0m Done builtin_saveenv
[32m>>>[0m Completed ebuild phases loadenv unpack saveenv
[32m>>>[0m Running ebuild phases loadenv prepare saveenv as paludisbuild:paludisbuild...
[32m>>>[0m Starting builtin_loadenv
[32m>>>[0m Done builtin_loadenv
[32m>>>[0m Starting src_prepare
 [32;01m*[0m Applying texmfcnflua2013.patch ...
[A[73G [34;01m[ [32;01mok[34;01m ][0m
[32m>>>[0m Done src_prepare
[32m>>>[0m Starting builtin_saveenv
[32m>>>[0m Done builtin_saveenv
[32m>>>[0m Completed ebuild phases loadenv prepare saveenv
[32m>>>[0m Running ebuild phases loadenv configure saveenv as paludisbuild:paludisbuild...
[32m>>>[0m Starting builtin_loadenv
[32m>>>[0m Done builtin_loadenv
[32m>>>[0m Starting src_configure
[32m>>>[0m Done src_configure
[32m>>>[0m Starting builtin_saveenv
[32m>>>[0m Done builtin_saveenv
[32m>>>[0m Completed ebuild phases loadenv configure saveenv
[32m>>>[0m Running ebuild phases loadenv compile saveenv as paludisbuild:paludisbuild...
[32m>>>[0m Starting builtin_loadenv
[32m>>>[0m Done builtin_loadenv
[32m>>>[0m Starting src_compile
 [32;01m*[0m Appending to format.texlive-basic.cnf for   name=dviluatex engine=luatex patterns=language.def,language.dat.lua   options="dviluatex.ini"
 [32;01m*[0m Appending to format.texlive-basic.cnf for   name=luatex    engine=luatex patterns=language.def,language.dat.lua   options="luatex.ini"
 [32;01m*[0m Appending to format.texlive-basic.cnf for name=mf engine=mf-nowin                   options="-translate-file=cp227.tcx mf.ini"
 [32;01m*[0m Appending to format.texlive-basic.cnf for name=etex    engine=pdftex patterns=language.def                     options="-translate-file=cp227.tcx *etex.ini"
 [32;01m*[0m Appending to format.texlive-basic.cnf for name=pdfetex engine=pdftex patterns=language.def                     options="-translate-file=cp227.tcx *pdfetex.ini"
 [32;01m*[0m Appending to format.texlive-basic.cnf for name=pdftex  engine=pdftex patterns=language.def                     options="-translate-file=cp227.tcx *pdfetex.ini"
 [32;01m*[0m Appending to format.texlive-basic.cnf for name=tex engine=tex options="tex.ini"
 [32;01m*[0m Building format texmf-dist/fmtutil/format.texlive-basic.cnf
fmtutil: running `luatex -ini   -jobname=dviluatex -progname=dviluatex dviluatex.ini' ...
This is LuaTeX, Version beta-0.76.0-2013081616 (rev 4627)  (INITEX)
 restricted \write18 enabled.

(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/conf
ig/dviluatex.ini
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/co
nfig/luatexiniconfig.tex)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/co
nfig/luatex-unicode-letters.tex loading Unicode properties)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/conf
ig/etex.ini
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/luatex/hyp
h-utf8/etex.src
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/base
/plain.tex Preloading the plain format: codes, registers, parameters, fonts,
more fonts, macros, math definitions, output routines, hyphenation
(/usr/share/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/etex
/etexdefs.lib Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/usr/share/texmf-dist/tex/generic/config/language.def
(/usr/share/texmf-dist/tex/generic/hyphen/hyphen.tex))
Augmenting the Plain TeX definitions: \tracingall;
Adding new e-TeX definitions: \eTeX, \loggingall, \tracingnone,
register allocation; extended register allocation; 
Recycling: \addlanguage, \@nswer (not defined), \@sk, \b@dresponsetrue,
\b@dresponsefalse, \ch@ckforyn, \mayber@cycle, \et@xabort, \et@xbuf,
\et@xfmtsrc, \et@xfilehdr, \et@xinf, \et@xpatterns, \l@ngdefnfile, \n@xt,
\p@rse (not defined), \pr@mpt (not defined), \pr@mptloop (not defined),
\forcer@cycle, \usef@llback, \usef@llbacktrue, \usef@llbackfalse, 
Retaining: \et@xerr, \et@xinput, \et@xlibhdr, \et@xmsg, \et@xtoks, \et@xwarn,
\et@xl@@d, \et@xl@ad, \et@xload, \et@xlang, \et@xhash, \eTeX, \etexhdrchk,
\etexstatus, \module, \uselanguage, \r@tain, \r@cycle,) ) )
Beginning to dump on file dviluatex.fmt
 (format=dviluatex 2013.8.16)
3113 strings using 9976 bytes
68807 memory locations dumped; current usage is 103&7764
1729 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
50 preloaded fonts
0 words of pdf memory
0 indirect objects
No pages of output.
Transcript written on dviluatex.log.
fmtutil: /var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-var/web2c/luatex/dviluatex.fmt installed.
fmtutil: running `luatex -ini   -jobname=luatex -progname=luatex luatex.ini' ...
This is LuaTeX, Version beta-0.76.0-2013081616 (rev 4627)  (INITEX)
 restricted \write18 enabled.

(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/conf
ig/luatex.ini
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/co
nfig/luatexiniconfig.tex)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/co
nfig/luatex-unicode-letters.tex loading Unicode properties)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/conf
ig/pdfetex.ini
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/co
nfig/pdftexconfig.tex)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/luatex/hyp
h-utf8/etex.src
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/base
/plain.tex Preloading the plain format: codes, registers, parameters, fonts,
more fonts, macros, math definitions, output routines, hyphenation
(/usr/share/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/etex
/etexdefs.lib Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/usr/share/texmf-dist/tex/generic/config/language.def
(/usr/share/texmf-dist/tex/generic/hyphen/hyphen.tex))
Augmenting the Plain TeX definitions: \tracingall;
Adding new e-TeX definitions: \eTeX, \loggingall, \tracingnone,
register allocation; extended register allocation; 
Recycling: \addlanguage, \@nswer (not defined), \@sk, \b@dresponsetrue,
\b@dresponsefalse, \ch@ckforyn, \mayber@cycle, \et@xabort, \et@xbuf,
\et@xfmtsrc, \et@xfilehdr, \et@xinf, \et@xpatterns, \l@ngdefnfile, \n@xt,
\p@rse (not defined), \pr@mpt (not defined), \pr@mptloop (not defined),
\forcer@cycle, \usef@llback, \usef@llbacktrue, \usef@llbackfalse, 
Retaining: \et@xerr, \et@xinput, \et@xlibhdr, \et@xmsg, \et@xtoks, \et@xwarn,
\et@xl@@d, \et@xl@ad, \et@xload, \et@xlang, \et@xhash, \eTeX, \etexhdrchk,
\etexstatus, \module, \uselanguage, \r@tain, \r@cycle,)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/conf
ig/pdftexmagfix.tex) ) )
Beginning to dump on file luatex.fmt
 (format=luatex 2013.8.16)
3125 strings using 10031 bytes
68807 memory locations dumped; current usage is 103&7795
1731 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
50 preloaded fonts
0 words of pdf memory
0 indirect objects
No pages of output.
Transcript written on luatex.log.
fmtutil: /var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-var/web2c/luatex/luatex.fmt installed.
fmtutil: running `mf-nowin -ini   -jobname=mf -progname=mf -translate-file=cp227.tcx mf.ini' ...
This is METAFONT, Version 2.718281 (TeX Live 2013) (INIMF)
(/usr/share/texmf-dist/web2c/cp227.tcx)

(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/metafont/confi
g/mf.ini
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/metafont/base/
plain.mf
Preloading the plain base, version 2.71: preliminaries,
 basic constants and mathematical macros,
 macros for converting from device-independent units to pixels,
 macros and tables for various modes of operation,
 macros for drawing and filling,
 macros for proof labels and rules,
 macros for character and font administration,
and a few last-minute items.)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/metafont/misc/
modes.mf) )
Beginning to dump on file mf.base
 (base=mf 2013.8.16)
2226 strings of total length 30209
11864 memory locations dumped; current usage is 3658&7844
1004 symbolic tokens
Transcript written on mf.log.
fmtutil: /var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-var/web2c/metafont/mf.base installed.
fmtutil: running `pdftex -ini   -jobname=etex -progname=etex -translate-file=cp227.tcx *etex.ini' ...
This is pdfTeX, Version 3.1415926-2.5-1.40.14 (TeX Live 2013) (INITEX)
 restricted \write18 enabled.
 (/usr/share/texmf-dist/web2c/cp227.tcx)
entering extended mode

(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/conf
ig/etex.ini
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/etex
/etex.src
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/base
/plain.tex Preloading the plain format: codes, registers, parameters, fonts,
more fonts, macros, math definitions, output routines, hyphenation
(/usr/share/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/etex
/etexdefs.lib Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/usr/share/texmf-dist/tex/generic/config/language.def
(/usr/share/texmf-dist/tex/generic/hyphen/hyphen.tex)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/hy
ph-utf8/loadhyph/loadhyph-zh-latn-pinyin.tex
EC Hyphenation patterns for unaccented pinyin syllables (CJK 4.8.0)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/hy
ph-utf8/conversions/conv-utf8-ec.tex)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/hy
ph-utf8/patterns/tex/hyph-zh-latn-pinyin.tex))
! I can't find file `dehypht-x-2012-05-30.tex'.
\addlanguage ...me =#5 \uselanguage {#1}\input #2 
                                                  \if *#3*\else \input #3 \f...
l.32 ...2-05-30}{dehypht-x-2012-05-30.tex}{}{2}{2}
                                                  
(Press Enter to retry, or Control-D to exit)
Please type another input file name: 
! Emergency stop.
\addlanguage ...me =#5 \uselanguage {#1}\input #2 
                                                  \if *#3*\else \input #3 \f...
l.32 ...2-05-30}{dehypht-x-2012-05-30.tex}{}{2}{2}
                                                  
No pages of output.
Transcript written on etex.log.
Error: `pdftex -ini  -jobname=etex -progname=etex -translate-file=cp227.tcx *etex.ini' failed
fmtutil: running `pdftex -ini   -jobname=pdfetex -progname=pdfetex -translate-file=cp227.tcx *pdfetex.ini' ...
This is pdfTeX, Version 3.1415926-2.5-1.40.14 (TeX Live 2013) (INITEX)
 restricted \write18 enabled.
 (/usr/share/texmf-dist/web2c/cp227.tcx)
entering extended mode

(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/conf
ig/pdfetex.ini
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/co
nfig/pdftexconfig.tex)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/etex
/etex.src
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/base
/plain.tex Preloading the plain format: codes, registers, parameters, fonts,
more fonts, macros, math definitions, output routines, hyphenation
(/usr/share/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/etex
/etexdefs.lib Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/usr/share/texmf-dist/tex/generic/config/language.def
(/usr/share/texmf-dist/tex/generic/hyphen/hyphen.tex)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/hy
ph-utf8/loadhyph/loadhyph-zh-latn-pinyin.tex
EC Hyphenation patterns for unaccented pinyin syllables (CJK 4.8.0)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/hy
ph-utf8/conversions/conv-utf8-ec.tex)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/hy
ph-utf8/patterns/tex/hyph-zh-latn-pinyin.tex))
! I can't find file `dehypht-x-2012-05-30.tex'.
\addlanguage ...me =#5 \uselanguage {#1}\input #2 
                                                  \if *#3*\else \input #3 \f...
l.32 ...2-05-30}{dehypht-x-2012-05-30.tex}{}{2}{2}
                                                  
(Press Enter to retry, or Control-D to exit)
Please type another input file name: 
! Emergency stop.
\addlanguage ...me =#5 \uselanguage {#1}\input #2 
                                                  \if *#3*\else \input #3 \f...
l.32 ...2-05-30}{dehypht-x-2012-05-30.tex}{}{2}{2}
                                                  
!  ==> Fatal error occurred, no output PDF file produced!
Transcript written on pdfetex.log.
Error: `pdftex -ini  -jobname=pdfetex -progname=pdfetex -translate-file=cp227.tcx *pdfetex.ini' failed
fmtutil: running `pdftex -ini   -jobname=pdftex -progname=pdftex -translate-file=cp227.tcx *pdfetex.ini' ...
This is pdfTeX, Version 3.1415926-2.5-1.40.14 (TeX Live 2013) (INITEX)
 restricted \write18 enabled.
 (/usr/share/texmf-dist/web2c/cp227.tcx)
entering extended mode

(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/conf
ig/pdfetex.ini
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/co
nfig/pdftexconfig.tex)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/etex
/etex.src
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/base
/plain.tex Preloading the plain format: codes, registers, parameters, fonts,
more fonts, macros, math definitions, output routines, hyphenation
(/usr/share/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/etex
/etexdefs.lib Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/usr/share/texmf-dist/tex/generic/config/language.def
(/usr/share/texmf-dist/tex/generic/hyphen/hyphen.tex)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/hy
ph-utf8/loadhyph/loadhyph-zh-latn-pinyin.tex
EC Hyphenation patterns for unaccented pinyin syllables (CJK 4.8.0)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/hy
ph-utf8/conversions/conv-utf8-ec.tex)
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/generic/hy
ph-utf8/patterns/tex/hyph-zh-latn-pinyin.tex))
! I can't find file `dehypht-x-2012-05-30.tex'.
\addlanguage ...me =#5 \uselanguage {#1}\input #2 
                                                  \if *#3*\else \input #3 \f...
l.32 ...2-05-30}{dehypht-x-2012-05-30.tex}{}{2}{2}
                                                  
(Press Enter to retry, or Control-D to exit)
Please type another input file name: 
! Emergency stop.
\addlanguage ...me =#5 \uselanguage {#1}\input #2 
                                                  \if *#3*\else \input #3 \f...
l.32 ...2-05-30}{dehypht-x-2012-05-30.tex}{}{2}{2}
                                                  
!  ==> Fatal error occurred, no output PDF file produced!
Transcript written on pdftex.log.
Error: `pdftex -ini  -jobname=pdftex -progname=pdftex -translate-file=cp227.tcx *pdfetex.ini' failed
fmtutil: running `tex -ini   -jobname=tex -progname=tex tex.ini' ...
This is TeX, Version 3.1415926 (TeX Live 2013) (INITEX)

(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/conf
ig/tex.ini
(/var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-dist/tex/plain/base
/plain.tex Preloading the plain format: codes, registers, parameters, fonts,
more fonts, macros, math definitions, output routines, hyphenation
(/usr/share/texmf-dist/tex/generic/hyphen/hyphen.tex)) )
Beginning to dump on file tex.fmt
 (format=tex 2013.8.16)
2027 strings of total length 29456
4990 memory locations dumped; current usage is 110&4877
926 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
  181 for language 0
No pages of output.
Transcript written on tex.log.
fmtutil: /var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-var/web2c/tex/tex.fmt installed.

###############################################################################
fmtutil: Error! Not all formats have been built successfully.
Visit the log files in directory
  /var/tmp/paludis/dev-texlive-texlive-basic-2013/work/texmf-var/web2c
for details.
###############################################################################

This is a summary of all `failed' messages:
`pdftex -ini  -jobname=etex -progname=etex -translate-file=cp227.tcx *etex.ini' failed
`pdftex -ini  -jobname=pdfetex -progname=pdfetex -translate-file=cp227.tcx *pdfetex.ini' failed
`pdftex -ini  -jobname=pdftex -progname=pdftex -translate-file=cp227.tcx *pdfetex.ini' failed

!!! ERROR in dev-texlive/texlive-basic-2013::gentoo:
!!! In texlive-module_src_compile at line 4535
!!! failed to build format texmf-dist/fmtutil/format.texlive-basic.cnf

!!! Call stack:
!!!    * texlive-module_src_compile (/var/tmp/paludis/dev-texlive-texlive-basic-2013/temp/loadsaveenv:4535)
!!!    * src_compile (/var/tmp/paludis/dev-texlive-texlive-basic-2013/temp/loadsaveenv:3874)
!!!    * ebuild_f_compile (/usr/libexec/paludis/2/src_compile.bash:56)
!!!    * ebuild_main (/usr/libexec/paludis/ebuild.bash:668)
!!!    * main (/usr/libexec/paludis/ebuild.bash:691)

diefunc: making ebuild PID 18256 exit with error
die trap: exiting with error.