diff -rupN base/configure.ac mod/configure.ac --- base/configure.ac 2011-03-25 23:28:18.000000000 +0100 +++ mod/configure.ac 2013-03-21 16:25:07.218419985 +0100 @@ -383,7 +383,7 @@ AC_CHECK_HEADERS(linux/input.h,[ dnl check if hiddev is available AC_CHECK_HEADERS([linux/types.h]) AC_CHECK_HEADERS([linux/hiddev.h],[ - possible_drivers="${possible_drivers} (asusdh) (bw6130) (dvico) (macmini)" + possible_drivers="${possible_drivers} (asusdh) (bw6130) (dvico) (macmini) (zotac)" AC_MSG_CHECKING(for HIDDEV_FLAG_UREF support) AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ #include @@ -393,7 +393,7 @@ AC_CHECK_HEADERS([linux/hiddev.h],[ ]])],[ AC_MSG_RESULT(yes) AC_DEFINE(HAVE_LINUX_HIDDEV_FLAG_UREF) - possible_drivers="${possible_drivers} (samsung) (sb0540)" + possible_drivers="${possible_drivers} (samsung) (sb0540) (zotac)" ],[ AC_MSG_RESULT(no) ]) @@ -446,7 +446,7 @@ AC_ARG_WITH(driver, srm7500libusb, tekram, tekram_bt829, tira, tira_raw, ttusbir, tuxbox, tvbox, udp, uirt2, uirt2_raw, - usb_uirt_raw, usbx, wpc8769l], + usb_uirt_raw, usbx, wpc8769l, zotac], driver=${withval}, driver="unset" ) @@ -464,6 +464,7 @@ portaudio_lib="" alsa_lib="" atilibusb_lib="" atwf83_lib="" +zotac_lib="" awlibusb_lib="" dfclibusb_lib="" srm7500libusb_lib="" @@ -683,6 +684,10 @@ if test "$driver" = "userspace" -o "$dri usbx) hw_module="${hw_module} hw_usbx.o serial.o" ;; + zotac) + hw_module="${hw_module} hw_zotac.o" + zotac_lib=-lpthread + ;; esac done #remove duplicates @@ -733,6 +738,14 @@ if test "$driver" = "alsa_usb"; then lircd_conf="creative/lircd.conf.alsa_usb" fi +if test "$driver" = "zotac"; then + lirc_driver="$driver" + hw_module="hw_zotac.o" + HW_DEFAULT="hw_zotac" + lircd_conf="zotac/lircd.conf.zotac" + zotac_lib=-lpthread +fi + if test "$driver" = "animax"; then lirc_driver="lirc_dev lirc_serial" lircd_conf="animax/lircd.conf.animax" @@ -1499,6 +1512,7 @@ if test "$lirc_driver" = "none" || \ test "$lirc_driver" = "macmini" || \ test "$lirc_driver" = "samsung" || \ test "$lirc_driver" = "sb0540" || \ + test "$lirc_driver" = "zotac" || \ test "$lirc_driver" = "srm7500libusb" || \ test "$lirc_driver" = "userspace"; then lirc_driver= @@ -1669,7 +1683,7 @@ if ! echo ${hw_module}|grep " receive.o" receive="receive.o" fi -hw_module_libs="${alsa_lib} ${atilibusb_lib} ${awlibusb_lib} ${caraca_lib} ${commandir_lib} ${dfclibusb_lib} ${ftdi_lib} ${iguanaIR_lib} ${irman_lib} ${portaudio_lib} ${srm7500libusb_lib} ${atwf83_lib}" +hw_module_libs="${alsa_lib} ${atilibusb_lib} ${awlibusb_lib} ${caraca_lib} ${commandir_lib} ${dfclibusb_lib} ${ftdi_lib} ${iguanaIR_lib} ${irman_lib} ${portaudio_lib} ${srm7500libusb_lib} ${atwf83_lib} ${zotac_lib}" dnl tell the Makefiles what we decided AC_SUBST(daemon) diff -rupN base/daemons/Makefile.am mod/daemons/Makefile.am --- base/daemons/Makefile.am 2011-03-25 23:28:18.000000000 +0100 +++ mod/daemons/Makefile.am 2013-03-21 16:25:40.488790784 +0100 @@ -58,7 +58,8 @@ EXTRA_libhw_module_a_SOURCES = \ hw_usbx.c hw_usbx.h \ receive.c receive.h \ transmit.c transmit.h \ - serial.c serial.h + serial.c serial.h \ + hw_zotac.c libhw_module_a_LIBADD = @hw_module@ libhw_module_a_DEPENDENCIES = @hw_module@ diff -rupN base/daemons/hw-types.c mod/daemons/hw-types.c --- base/daemons/hw-types.c 2011-03-25 23:28:18.000000000 +0100 +++ mod/daemons/hw-types.c 2013-03-21 16:26:38.913200218 +0100 @@ -59,6 +59,7 @@ extern struct hardware hw_uirt2; extern struct hardware hw_uirt2_raw; extern struct hardware hw_usb_uirt_raw; extern struct hardware hw_usbx; +extern struct hardware hw_zotac; #ifndef HW_DEFAULT # define HW_DEFAULT hw_default @@ -160,6 +161,7 @@ struct hardware *hw_list[] = { #ifdef HAVE_LINUX_HIDDEV_FLAG_UREF &hw_samsung, &hw_sb0540, + &hw_zotac, #endif &hw_silitek, #ifdef HAVE_LIBUSB diff -rupN base/daemons/hw_zotac.c mod/daemons/hw_zotac.c --- base/daemons/hw_zotac.c 1970-01-01 01:00:00.000000000 +0100 +++ mod/daemons/hw_zotac.c 2013-03-21 16:31:06.989272556 +0100 @@ -0,0 +1,429 @@ +/**************************************************************************** + ** hw_zotac.c ************************************************************* + **************************************************************************** + * + * Lirc driver for Zotac remote + * + * Copyright (C) 2010 Rainer Hochecker + * + * Distribute under GPL version 2 or later. + * + */ + +#ifdef HAVE_CONFIG_H +# include +#endif + +#include +#include +#include +#include +#include +#include +#include "hardware.h" +#include "ir_remote.h" +#include "lircd.h" + +enum { + RPT_NO = 0, + RPT_YES = 1, +}; + +static int zotac_init(); +static int zotac_deinit(); +static char *zotac_rec(struct ir_remote *remotes); +static int zotac_decode(struct ir_remote *remote, ir_code * prep, ir_code * codep, ir_code * postp, int *repeat_flagp, + lirc_t * min_remaining_gapp, lirc_t * max_remaining_gapp); +static void *zotac_repeat(); +static int zotac_getcode(); + +/** Max number of repetitions */ +const unsigned max_repeat_count = 500; +/** Code that triggers key release */ +const unsigned release_code = 0x00000000; +/** Code that triggers device remove */ +const unsigned remove_code =0x00FFFFFF; +/** Time to wait before first repetition */ +const unsigned repeat_time1_us = 500000; +/** Time to wait between two repetitions */ +const unsigned repeat_time2_us = 100000; +/** Pipe between main thread and repetition thread */ +static int fd_pipe[2] = { -1, -1 }; + +/** Thread that simulates repetitions */ +static pthread_t repeat_thread; +/** File descriptor for the real device */ +static int fd_hidraw; + +const int main_code_length = 32; +static signed int main_code = 0; +static struct timeval start, end, last; +static int repeat_state = RPT_NO; +static int error_state = 0; +static int probe_code = 0; + +#ifdef HAVE_LINUX_HIDDEV_FLAG_UREF +/* Zotac USB iR Receiver */ +struct hardware hw_zotac = { + "/dev/usb/hiddev0", /* "device" */ + -1, /* fd (device) */ + LIRC_CAN_REC_LIRCCODE, /* features */ + 0, /* send_mode */ + LIRC_MODE_LIRCCODE, /* rec_mode */ + 32, /* code_length */ + zotac_init, /* init_func */ + zotac_deinit, /* deinit_func */ + NULL, /* send_func */ + zotac_rec, /* rec_func */ + zotac_decode, /* decode_func */ + NULL, /* ioctl_func */ + NULL, /* readdata */ + "zotac" /* name */ +}; +#endif + +static int zotac_decode(struct ir_remote *remote, ir_code * prep, ir_code * codep, ir_code * postp, int *repeat_flagp, + lirc_t * min_remaining_gapp, lirc_t * max_remaining_gapp) +{ + LOGPRINTF(1, "zotac_decode"); + + if (!map_code(remote, prep, codep, postp, 0, 0, main_code_length, main_code, 0, 0)) { + return 0; + } + + map_gap(remote, &start, &last, 0, repeat_flagp, min_remaining_gapp, max_remaining_gapp); + /* override repeat */ + *repeat_flagp = repeat_state; + + return 1; +} + +static int zotac_getcode() { + + ssize_t rd; + struct hiddev_usage_ref uref; + struct hiddev_report_info rinfo; + struct hiddev_field_info finfo; + int shift = 0; + + rd = read(fd_hidraw, &uref, sizeof(uref)); + if (rd < 0) { + logprintf(LOG_ERR, "error reading '%s'", hw.device); + logperror(LOG_ERR, NULL); + zotac_deinit(); + error_state = 1; + return -1; + } + + if (uref.field_index == HID_FIELD_INDEX_NONE) { + /* + * we get this when the new report has been send from + * device at this point we have the uref structure + * prefilled with correct report type and id + * + */ + + switch (uref.report_id) { + case 1: /* USB standard keyboard usage page */ + { + /* This page reports cursor keys */ + LOGPRINTF(3, "Keyboard (standard)\n"); + + /* check for special codes */ + uref.field_index = 0; + uref.usage_index = 1; + /* fetch the usage code for given indexes */ + ioctl(fd_hidraw, HIDIOCGUCODE, &uref, sizeof(uref)); + /* fetch the value from report */ + ioctl(fd_hidraw, HIDIOCGUSAGE, &uref, sizeof(uref)); + + if (uref.value) + shift = 1; + + /* populate required field number */ + uref.field_index = 1; + uref.usage_index = 0; + /* fetch the usage code for given indexes */ + ioctl(fd_hidraw, HIDIOCGUCODE, &uref, sizeof(uref)); + /* fetch the value from report */ + ioctl(fd_hidraw, HIDIOCGUSAGE, &uref, sizeof(uref)); + /* now we have the key */ + + LOGPRINTF(3, "usage: %x value: %x shift: %d\n",uref.usage_code, uref.value, shift); + + /* now we have the key */ + if (uref.value) { + probe_code = (uref.usage_code | uref.value); + if (shift) + probe_code |= 0x10000000; + LOGPRINTF(3, "Main code 1: %x\n", probe_code); + return 1; + } + else { + LOGPRINTF(3, "rel button\n"); + probe_code = release_code; + return 2; + } + } + break; + + case 2: + case 3: /* USB generic desktop usage page */ + case 4: + { + /* This page reports power key + * (via SystemControl SLEEP) + */ + LOGPRINTF(3, "Generic desktop (standard)\n"); + + + /* traverse report descriptor */ + rinfo.report_type = HID_REPORT_TYPE_INPUT; + rinfo.report_id = HID_REPORT_ID_FIRST; + rd = ioctl(fd_hidraw, HIDIOCGREPORTINFO, &rinfo); + + unsigned int i,j; + while (rd >= 0) { + for (i = 0; i < rinfo.num_fields; i++) { + finfo.report_type = rinfo.report_type; + finfo.report_id = rinfo.report_id; + finfo.field_index = i; + ioctl(fd_hidraw, HIDIOCGFIELDINFO, &finfo); + for (j = 0; j < finfo.maxusage; j++) { + uref.field_index = i; + uref.usage_index = j; + ioctl(fd_hidraw, HIDIOCGUCODE, &uref); + ioctl(fd_hidraw, HIDIOCGUSAGE, &uref); + + if (uref.value != 0) { + LOGPRINTF(3, "field: %d, idx: %d, usage: %x value: %x\n",i, j, uref.usage_code, uref.value); + probe_code = uref.usage_code; + return 1; + } + } + } + rinfo.report_id |= HID_REPORT_ID_NEXT; + rd = ioctl(fd_hidraw, HIDIOCGREPORTINFO, &rinfo); + } + return 2; + } + break; + default: + /* Unknown/unsupported report id. + * Should not happen because remaining reports + * from report descriptor seem to be unused by remote. + */ + logprintf(LOG_ERR, "Unexpected report id %d", uref.report_id); + break; + } + } + else { + /* This page reports power key + * (via SystemControl SLEEP) + */ + LOGPRINTF(3, "Same Event ...\n"); + + /* traverse report descriptor */ + rinfo.report_type = HID_REPORT_TYPE_INPUT; + rinfo.report_id = HID_REPORT_ID_FIRST; + rd = ioctl(fd_hidraw, HIDIOCGREPORTINFO, &rinfo); + + unsigned int i,j; + while (rd >= 0) { + for (i = 0; i < rinfo.num_fields; i++) { + finfo.report_type = rinfo.report_type; + finfo.report_id = rinfo.report_id; + finfo.field_index = i; + ioctl(fd_hidraw, HIDIOCGFIELDINFO, &finfo); + for (j = 0; j < finfo.maxusage; j++) { + uref.field_index = i; + uref.usage_index = j; + ioctl(fd_hidraw, HIDIOCGUCODE, &uref); + ioctl(fd_hidraw, HIDIOCGUSAGE, &uref); + + if (uref.value != 0) { + LOGPRINTF(3, "usage: %x value: %x\n",uref.usage_code, uref.value); + //probe_code = uref.usage_code; + return 0; + } + } + } + rinfo.report_id |= HID_REPORT_ID_NEXT; + rd = ioctl(fd_hidraw, HIDIOCGREPORTINFO, &rinfo); + } + return 2; + } + return 0; +} + +static int zotac_init() +{ + logprintf(LOG_INFO, "zotac initializing '%s'", hw.device); + if ((fd_hidraw = open(hw.device, O_RDONLY)) < 0) { + logprintf(LOG_ERR, "unable to open '%s'", hw.device); + return 0; + } + int flags = HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT; + if (ioctl(fd_hidraw, HIDIOCSFLAG, &flags)) { + return 0; + } + hw.fd = fd_hidraw; + + /* Create pipe so that events sent by the repeat thread will + trigger main thread */ + if (pipe(fd_pipe) != 0) { + logperror(LOG_ERR, "couldn't open pipe"); + close(fd_hidraw); + return 0; + } + hw.fd = fd_pipe[0]; + /* Create thread to simulate repetitions */ + if (pthread_create(&repeat_thread, NULL, zotac_repeat, NULL)) { + logprintf(LOG_ERR, "Could not create \"repeat thread\""); + return 0; + } + return 1; +} + +static int zotac_deinit() +{ + pthread_cancel(repeat_thread); + if (fd_hidraw != -1) { + // Close device if it is open + logprintf(LOG_INFO, "closing '%s'", hw.device); + close(fd_hidraw); + fd_hidraw = -1; + } + // Close pipe input + if (fd_pipe[1] >= 0) { + close(fd_pipe[1]); + fd_pipe[1] = -1; + } + // Close pipe output + if (fd_pipe[0] >= 0) { + close(fd_pipe[0]); + fd_pipe[0] = -1; + } + hw.fd = -1; + return 1; +} + +/** + * Runtime that reads device, forwards codes to main thread + * and simulates repetitions. + */ +static void *zotac_repeat() +{ + int repeat_count = 0; + unsigned current_code; + int ret; + int sel; + fd_set files; + struct timeval delay; + int pressed = 0; + int fd = fd_pipe[1]; + + while (1) { + // Initialize set to monitor device's events + FD_ZERO(&files); + FD_SET(fd_hidraw, &files); + if (pressed) { + sel = select(FD_SETSIZE, &files, NULL, NULL, &delay); + } else { + sel = select(FD_SETSIZE, &files, NULL, NULL, NULL); + } + + switch (sel) { + case 1: + // Data ready in device's file + ret = zotac_getcode(); + + if (ret < 0) { + // Error + logprintf(LOG_ERR, "(%s) Could not read %s", __FUNCTION__, hw.device); + goto exit_loop; + } + if (ret == 1) { + // Key code : forward it to main thread + pressed = 1; + repeat_count = 0; + delay.tv_sec = 0; + delay.tv_usec = repeat_time1_us; + current_code = probe_code; + } else if (ret == 2) { + // Release code : stop repetitions + pressed = 0; + current_code = release_code; + } else if (ret == 0) { + continue; + } + break; + case 0: + repeat_count++; + if (repeat_count >= max_repeat_count) { + // Too many repetitions, something must have gone wrong + logprintf(LOG_ERR,"(%s) too many repetitions", __FUNCTION__); + goto exit_loop; + } + // Timeout : send current_code again to main + // thread to simulate repetition + delay.tv_sec = 0; + delay.tv_usec = repeat_time2_us; + break; + default: + // Error + logprintf(LOG_ERR, "(%s) select() failed", __FUNCTION__); + goto exit_loop; + } + // Send code to main thread through pipe + write(fd, ¤t_code, sizeof(current_code)); + } +exit_loop: + + // Wake up main thread with special key code + current_code = remove_code; + write(fd, ¤t_code, sizeof(current_code)); + return NULL; +} + +/* +* Aureal Technology ATWF@83 cheap remote +* specific code. +*/ + +static char *zotac_rec(struct ir_remote *remotes) +{ + unsigned ev; + int rd; + last = end; + gettimeofday(&start, NULL); + rd = read(hw.fd, &ev, sizeof(ev)); + + if (rd == -1) { + // Error + logprintf(LOG_ERR, "(%s) could not read pipe", __FUNCTION__); + zotac_deinit(); + return 0; + } + + if (ev == release_code) { + // Release code + main_code = 0; + return 0; + } else if (ev == remove_code) { + // Device has been removed + zotac_deinit(); + return 0; + } + + LOGPRINTF(1, "zotac : %x", ev); + // Record the code and check for repetition + if (main_code == ev) { + repeat_state = RPT_YES; + } else { + main_code = ev; + repeat_state = RPT_NO; + } + gettimeofday(&end, NULL); + return decode_all(remotes); +} diff -rupN base/remotes/zotac/lircd.conf.zotac mod/remotes/zotac/lircd.conf.zotac --- base/remotes/zotac/lircd.conf.zotac 1970-01-01 01:00:00.000000000 +0100 +++ mod/remotes/zotac/lircd.conf.zotac 2013-03-21 16:31:31.343367869 +0100 @@ -0,0 +1,77 @@ + +# Please make this file available to others +# by sending it to +# +# this config file was automatically generated +# using lirc-0.9.1-git(zotac) on Mon Apr 2 14:10:29 2012 +# +# contributed by +# +# brand: zotac.conf +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + + name zotac.conf + bits 32 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 100123 + min_repeat 9 +# suppress_repeat 9 +# uncomment to suppress unwanted repeats +# toggle_bit_mask 0x7004F + + begin codes + KEY_SLEEP 0x00010082 + KEY_WAKEUP 0x00010083 + KEY_RECORD 0x000C00B2 + KEY_PAUSE 0x000C00B1 + KEY_STOP 0x000C00B7 + KEY_REWIND 0x000C00B4 + KEY_PLAY 0x000C00B0 + KEY_FORWARD 0x000C00B3 + KEY_LEFTSHIFT 0x000C00B6 + KEY_RIGHTSHIFT 0x000C00B5 + KEY_BACK 0x000C0224 + KEY_INFO 0x000C0209 + KEY_MENU 0xFFBC000D + KEY_UP 0x00070052 + KEY_LEFT 0x00070050 + KEY_RIGHT 0x0007004F + KEY_DOWN 0x00070051 + KEY_OK 0x00070028 + KEY_VOLUMEUP 0x000C00E9 + KEY_VOLUMEDOWN 0x000C00EA + KEY_MUTE 0x000C00E2 + KEY_CHANNELUP 0x000C009C + KEY_CHANNELDOWN 0x000C009D + KEY_1 0x0007001E + KEY_2 0x0007001F + KEY_3 0x00070020 + KEY_4 0x00070021 + KEY_5 0x00070022 + KEY_6 0x00070023 + KEY_7 0x00070024 + KEY_8 0x00070025 + KEY_9 0x00070026 + KEY_0 0x00070027 + KEY_NUMERIC_STAR 0x10070025 + KEY_NUMERIC_POUND 0x10070020 + KEY_CLEAR 0x00070029 + KEY_TEXT 0xFFBC005A + KEY_TITLE 0x000C008D + KEY_ENTER 0x00070028 + KEY_RED 0xFFBC005B + KEY_GREEN 0xFFBC005C + KEY_YELLOW 0xFFBC005D + KEY_BLUE 0xFFBC005E + end codes + +end remote + diff -rupN base/setup.data mod/setup.data --- base/setup.data 2011-03-25 23:28:18.000000000 +0100 +++ mod/setup.data 2013-03-21 16:28:11.433935463 +0100 @@ -146,6 +146,7 @@ hw_menu_entry: @hw-usb usb_uirt_raw: "USB-UIRT" mplay: "VLSystem MPlay Blast" mplay: "VLSystem MPlay Mini" + zotac: "Zotac USB IR Receiver" param_type: \ act200l \ @@ -260,7 +261,8 @@ param_type: \ ttusbir \ tvbox \ udp \ - wpc8769l + wpc8769l \ + zotac none: default_param: \ @@ -331,7 +333,8 @@ default_param: \ ttusbir \ tvbox \ udp \ - wpc8769l + wpc8769l \ + zotac none: default_param: \