lm_sensors-3.3.3-r2.ebuild

lm_sensors-3.3.3-r2.ebuild (text/plain), 3.21 KB, created by RedEyedMan on 2013-02-24 17:35:14 UTC

# Copyright 1999-2013 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/lm_sensors-3.3.3-r2.ebuild,v 1.2 2013/02/19 05:01:56 zmedico Exp $

EAPI=5

inherit eutils linux-info toolchain-funcs multilib systemd

DESCRIPTION="Hardware Monitoring user-space utilities"
HOMEPAGE="http://www.lm-sensors.org/"
SRC_URI="http://dl.lm-sensors.org/lm-sensors/releases/${P}.tar.bz2"

LICENSE="GPL-2 LGPL-2.1"
SLOT="0"
KEYWORDS="~alpha ~amd64 ~arm ~mips ~ppc ~sparc ~x86 ~amd64-linux ~arm-linux ~x86-linux"
IUSE="sensord static-libs"

RDEPEND="dev-lang/perl
	sensord? (
		net-analyzer/rrdtool
		virtual/logger
		)"
DEPEND="${RDEPEND}
	sys-devel/bison
	sys-devel/flex"

CONFIG_CHECK="~HWMON ~I2C_CHARDEV ~I2C"
WARNING_HWMON="${PN} requires CONFIG_HWMON to be enabled for use."
WARNING_I2C_CHARDEV="sensors-detect requires CONFIG_I2C_CHARDEV to be enabled."
WARNING_I2C="${PN} requires CONFIG_I2C to be enabled for most sensors."

src_prepare() {
	epatch "${FILESDIR}"/${PN}-3.3.1-sensors-detect-gentoo.patch

	use sensord && { sed -i -e 's:^#\(PROG_EXTRA.*\):\1:' Makefile || die; }

	# Respect LDFLAGS
	sed -i -e 's/\$(LIBDIR)$/\$(LIBDIR) \$(LDFLAGS)/g' Makefile || die

	use static-libs || { sed -i -e '/^BUILD_STATIC_LIB/d' Makefile || die; }
}

src_compile() {
	einfo
	einfo "You may safely ignore any errors from compilation"
	einfo "that contain \"No such file or directory\" references."
	einfo

	emake CC="$(tc-getCC)"
}

src_install() {
	emake \
		DESTDIR="${D}" \
		PREFIX="${EPREFIX}/usr" \
		MANDIR="${EPREFIX}/usr/share/man" \
		ETCDIR="${EPREFIX}/etc" \
		LIBDIR="${EPREFIX}/usr/$(get_libdir)" \
		install

	newinitd "${FILESDIR}"/${PN}-3-init.d ${PN}
	newinitd "${FILESDIR}"/fancontrol-init.d-2 fancontrol

	if use sensord; then
		newconfd "${FILESDIR}"/sensord-conf.d sensord
		newinitd "${FILESDIR}"/sensord-4-init.d sensord
	fi

	sed -i -e 's:\(^EnvironmentFile=\).*:\1/etc/conf.d/lm_sensors:' \
		prog/init/lm_sensors.service || die
	systemd_dounit prog/init/lm_sensors.service

	dodoc CHANGES CONTRIBUTORS INSTALL README \
		doc/{donations,fancontrol.txt,fan-divisors,libsensors-API.txt,progs,temperature-sensors,vid}

	docinto chips
	dodoc doc/chips/*

	docinto developers
	dodoc doc/developers/applications
}

pkg_postinst() {
	elog
	elog "Please run \`/usr/sbin/sensors-detect' in order to setup"
	elog "/etc/conf.d/${PN}."
	elog
	elog "/etc/conf.d/${PN} is vital to the init-script."
	elog "Please make sure you also add ${PN} to the desired"
	elog "runlevel. Otherwise your I2C modules won't get loaded"
	elog "on the next startup."
	elog
	elog "You will also need to run the above command if you're upgrading from"
	elog "<=${PN}-2, as the needed entries in /etc/conf.d/${PN} has"
	elog "changed."
	elog
	elog "Be warned, the probing of hardware in your system performed by"
	elog "sensors-detect could freeze your system. Also make sure you read"
	elog "the documentation before running ${PN} on IBM ThinkPads."
	elog
	elog "Also make sure you have read:"
	elog "http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31"
	elog
	elog "Please refer to the ${PN} documentation for more information."
	elog "(http://www.lm-sensors.org/wiki/Documentation)"
	elog
}