### /etc/apache2/conf/commonapache2.conf ### $Id: commonapache2.conf,v 1.3 2004/04/16 11:24:39 zul Exp $ ### ### Common server configuration. ### User apache Group apache ### ### ServerAdmin: Your address, where problems with the server should be ### e-mailed. This address appears on some server-generated pages, such ### as error documents. ### ServerAdmin root@localhost ### ### DocumentRoot: The directory out of which you will serve your ### documents. By default, all requests are taken from this directory, but ### symbolic links and aliases may be used to point to other locations. ### DO NOT MODIFY THIS ONE, USE apache2.conf. ### #DocumentRoot /var/www/localhost/htdocs ### ### Each directory to which Apache has access, can be configured with respect ### to which services and features are allowed and/or disabled in that ### directory (and its subdirectories). ### ### First, we configure the "default" to be a very restrictive set of ### permissions. Also, for security, we disable indexes globally. ### ### Restricted set of options: ### Options -All -Multiviews AllowOverride None Order deny,allow Deny from all ### ### Note that from this point forward you must specifically allow ### particular features to be enabled - so if something's not working as ### you might expect, make sure that you have specifically enabled it ### below. ### ### ### UserDir: The name of the directory which is appended onto a user's home ### directory if a ~user request is received. ### UserDir public_html ### ### DirectoryIndex: Name of the file or files to use as a pre-written HTML ### directory index. Separate multiple entries with spaces. ### DirectoryIndex index.html index.html.var index.php index.php3 index.shtml index.cgi index.pl index.htm Default.htm default.htm ### ### AccessFileName: The name of the file to look for in each directory ### for access control information. ### AccessFileName .htaccess ### ### The following lines prevent .htaccess files from being viewed by ### Web clients. Since .htaccess files often contain authorization ### information, access is disallowed for security reasons. Comment ### these lines out if you want Web visitors to see the contents of ### .htaccess files. If you change the AccessFileName directive above, ### be sure to make the corresponding changes here. ### ### Also, folks tend to use names such as .htpasswd for password ### files, so this will protect those as well. ### Order allow,deny Deny from all ### ### CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each ### document that was negotiated on the basis of content. This asks proxy ### servers not to cache the document. Uncommenting the following line disables ### this behavior, and proxies will be allowed to cache the documents. ### #CacheNegotiatedDocs ### ### UseCanonicalName: (new for 1.3) With this setting turned on, whenever ### Apache needs to construct a self-referencing URL (a URL that refers back ### to the server the response is coming from) it will use ServerName and ### Port to form a "canonical" name. With this setting off, Apache will ### use the hostname:port that the client supplied, when possible. This ### also affects SERVER_NAME and SERVER_PORT in CGI scripts. ### UseCanonicalName On ### ### TypesConfig describes where the mime.types file (or equivalent) is ### to be found. ### TypesConfig conf/mime.types ### ### DefaultType is the default MIME type the server will use for a document ### if it cannot otherwise determine one, such as from filename extensions. ### If your server contains mostly text or HTML documents, "text/plain" is ### a good value. If most of your content is binary, such as applications ### or images, you may want to use "application/octet-stream" instead to ### keep browsers from trying to display binary files as text. ### DefaultType text/plain ### ### The mod_mime_magic module allows the server to use various hints from the ### contents of the file itself to determine its type. The MIMEMagicFile ### directive tells the module where the hint definitions are located. ### mod_mime_magic is not part of the default server (you have to add ### it yourself with a LoadModule [see the DSO paragraph in the 'Global ### Environment' section], or recompile the server and include mod_mime_magic ### as part of the configuration), so it's enclosed in an container. ### This means that the MIMEMagicFile directive will only be processed if the ### module is part of the server. ### MIMEMagicFile conf/magic ### ### HostnameLookups: Log the names of clients or just their IP addresses ### e.g., www.apache.org (on) or 204.62.129.132 (off). ### The default is off because it'd be overall better for the net if people ### had to knowingly turn this feature on, since enabling it means that ### each client request will result in AT LEAST one lookup request to the ### nameserver. ### HostnameLookups On ### ### EnableMMAP: Control whether memory-mapping is used to deliver ### files (assuming that the underlying OS supports it). ### The default is on; turn this off if you serve from NFS-mounted ### filesystems. On some systems, turning it off (regardless of ### filesystem) can improve performance; for details, please see ### http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap ### EnableMMAP on ### ### The following directives define some format nicknames for use with ### a CustomLog directive (see below). ### LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent LogFormat "%v %h %l %u %t \"%r\" %>s %b %T" script LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" VLOG=%{VLOG}e" vhost # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio # The location and format of the access logfile (Common Logfile Format). #CustomLog logs/access_log common # # If you would like to have agent and referer logfiles, uncomment these #CustomLog logs/referer_log referer #CustomLog logs/agent_log agent # # If you prefer a single logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. #CustomLog logs/access_log combined # # End of Log directives. ### ### ServerTokens ### This directive configures what you return as the Server HTTP response ### Header. The default is 'Full' which sends information about the OS-Type ### and compiled in modules. ### Set to one of: Full | OS | Minor | Minimal | Major | Prod ### where Full conveys the most information, and Prod the least. ### ServerTokens Prod ### ### Optionally add a line containing the server version and virtual host ### name to server-generated pages (error documents, FTP directory listings, ### mod_status and mod_info output etc., but not CGI generated documents). ### Set to "EMail" to also include a mailto: link to the ServerAdmin. ### Set to one of: On | Off | EMail ### ServerSignature Off ### ### Aliases: Add here as many aliases as you need (with no limit). The format is ### Alias fakename realname ### # # Note that if you include a trailing / on fakename then the server will # require it to be present in the URL. So "/icons" isn't aliased in this # example, only "/icons/".. # Alias /icons/ /var/www/localhost/icons/ Alias /doc /usr/share/doc # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the realname directory are treated as applications and # run by the server when requested rather than as documents sent to the client. # The same rules about trailing "/" apply to ScriptAlias directives as to # Alias. # ScriptAlias /cgi-bin/ /var/www/localhost/cgi-bin/ ScriptAlias /protected-cgi-bin/ /var/www/localhost/protected-cgi-bin/ ScriptAliasMatch ^/~([^/]*)/cgi-bin/(.*) /home/$1/public_html/cgi-bin/$2 #Provide two aliases to the same cgi-bin directory, #to see the effects of the 2 different mod_perl modes #for Apache::Registry Mode Alias /perl/ /var/www/localhost/perl/ #for Apache::Perlrun Mode Alias /cgi-perl/ /var/www/localhost/perl/ # End of Alias directives. ### ### Redirect allows you to tell clients about documents which used to exist in ### your server's namespace, but do not anymore. This allows you to tell the ### clients where to look for the relocated document. ### Format: Redirect old-URI new-URL ### #Redirect old-URI new-URL ### ### Directives controlling the display of server-generated directory listings. ### # # FancyIndexing is whether you want fancy directory indexing or standard # IndexOptions FancyIndexing VersionSort NameWidth=* # # AddIcon* directives tell the server which icon to show for different # files or filename extensions. These are only displayed for # FancyIndexed directories. # AddIconByEncoding (CMP,/icons/compressed.png) x-compress x-gzip AddIconByType (TXT,/icons/text.png) text/* AddIconByType (IMG,/icons/image2.png) image/* AddIconByType (SND,/icons/sound2.png) audio/* AddIconByType (VID,/icons/movie.png) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip .bz2 AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py .php .php3 AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ # # DefaultIcon is which icon to show for files which do not have an icon # explicitly set. # DefaultIcon /icons/unknown.gif # # AddDescription allows you to place a short description after a file in # server-generated indexes. These are only displayed for FancyIndexed # directories. # Format: AddDescription "description" filename # #AddDescription "GZIP compressed document" .gz #AddDescription "tar archive" .tar #AddDescription "GZIP compressed tar archive" .tgz # # ReadmeName is the name of the README file the server will look for by # default, and append to directory listings. # # HeaderName is the name of a file which should be prepended to # directory indexes. # # If MultiViews are amongst the Options in effect, the server will # first look for name.html and include it if found. If name.html # doesn't exist, the server will then look for name.txt and include # it as plaintext if found. # ReadmeName README.html HeaderName HEADER.html # # IndexIgnore is a set of filenames which directory indexing should ignore # and not include in the listing. Shell-style wildcarding is permitted. # IndexIgnore .??* *~ *# HEADER* RCS CVS *,v *,t # End of indexing directives. ### ### Document types. ### # # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress # information on the fly. Note: Not all browsers support this. # Despite the name similarity, the following Add* directives have nothing # to do with the FancyIndexing customization directives above. # AddEncoding x-compress Z AddEncoding x-gzip gz tgz # # AddLanguage allows you to specify the language of a document. You can # then use content negotiation to give a browser a file in a language # it can understand. # # Note 1: The suffix does not have to be the same as the language # keyword --- those with documents in Polish (whose net-standard # language code is pl) may wish to use "AddLanguage pl .po" to # avoid the ambiguity with the common suffix for perl scripts. # # Note 2: The example entries below illustrate that in quite # some cases the two character 'Language' abbreviation is not # identical to the two character 'Country' code for its country, # E.g. 'Danmark/dk' versus 'Danish/da'. # # Note 3: In the case of 'ltz' we violate the RFC by using a three char # specifier. But there is 'work in progress' to fix this and get # the reference data for rfc1766 cleaned up. # # Danish (da) - Dutch (nl) - English (en) - Estonian (ee) # French (fr) - German (de) - Greek-Modern (el) # Italian (it) - Korean (kr) - Norwegian (no) # Portugese (pt) - Luxembourgeois* (ltz) # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz) # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) # Russian (ru) # AddLanguage ca .ca AddLanguage cz .cz AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage es .es AddLanguage et .ee AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage kr .kr AddLanguage ltz .ltz AddLanguage ltz .lu AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt-br .pt-br AddLanguage pt .pt AddLanguage ru .ru AddLanguage sv .se AddLanguage tw .tw AddLanguage zh-tw .tw # # Specify a default charset for all pages sent out. This is # always a good idea and opens the door for future internationalisation # of your web site, should you ever want it. Specifying it as # a default does little harm; as the standard dictates that a page # is in iso-8859-1 (latin1) unless specified otherwise i.e. you # are merely stating the obvious. There are also some security # reasons in browsers, related to javascript and URL parsing # which encourage you to always set a default char set. # AddDefaultCharset ISO-8859-2 # LanguagePriority allows you to give precedence to some languages # in case of a tie during content negotiation. # # Just list the languages in decreasing order of preference. We have # more or less alphabetized them here. You probably want to change this. # LanguagePriority en fr de es it da nl et el ja kr no pl pt pt-br ru ltz ca sv tw # # ForceLanguagePriority allows you to serve a result page rather than # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback) # [in case no accepted languages matched the available variants] # ForceLanguagePriority Prefer Fallback # # Commonly used filename extensions to character sets. You probably # want to avoid clashes with the language extensions, unless you # are good at carefully testing your setup after each change. # See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets for # the official list of charset names and their respective RFCs # AddCharset ISO-8859-1 .iso8859-1 .latin1 AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen AddCharset ISO-8859-3 .iso8859-3 .latin3 AddCharset ISO-8859-4 .iso8859-4 .latin4 AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk AddCharset ISO-2022-JP .iso2022-jp .jis AddCharset ISO-2022-KR .iso2022-kr .kis AddCharset ISO-2022-CN .iso2022-cn .cis AddCharset Big5 .Big5 .big5 # For russian, more than one charset is used (depends on client, mostly): AddCharset WINDOWS-1251 .cp-1251 .win-1251 AddCharset CP866 .cp866 AddCharset KOI8-r .koi8-r .koi8-ru AddCharset KOI8-ru .koi8-uk .ua AddCharset ISO-10646-UCS-2 .ucs2 AddCharset ISO-10646-UCS-4 .ucs4 AddCharset UTF-8 .utf8 # # The set below does not map to a specific (iso) standard # but works on a fairly wide range of browsers. Note that # capitalization actually matters (it should not, but it # does for some browsers). # # See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets # for a list of sorts. But browsers support few. # AddCharset GB2312 .gb2312 .gb AddCharset utf-7 .utf7 AddCharset utf-8 .utf8 AddCharset big5 .big5 .b5 AddCharset EUC-TW .euc-tw AddCharset EUC-JP .euc-jp AddCharset EUC-KR .euc-kr AddCharset shift_jis .sjis # # AddType allows you to tweak mime.types without actually editing it, or to # make certain files to be certain types. # AddType application/x-tar .tgz AddType image/x-icon .ico # # AddHandler allows you to map certain file extensions to "handlers", # actions unrelated to filetype. These can be either built into the server # or added with the Action command (see below) # # If you want to use server side includes, or CGI outside # ScriptAliased directories, uncomment the following lines. # # To use CGI scripts: # AddHandler cgi-script .cgi # # For type maps (negotiated resources): # (This is enabled by default to allow the Apache "It Worked" page # to be distributed in multiple languages.) # AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # AddType text/html .shtml AddOutputFilter INCLUDES .shtml # # Uncomment the following line to enable Apache's send-asis HTTP file # feature # #AddHandler send-as-is asis # # If you wish to use server-parsed imagemap files, use # AddHandler imap-file map # # To enable type maps, you might want to use # #AddHandler type-map var # End of document types. ### ### Action lets you define media types that will execute a script whenever ### a matching file is called. This eliminates the need for repeated URL ### pathnames for oft-used CGI file processors. ### #Action media/type /cgi-script/location #Action handler-name /cgi-script/location ### ### Putting this all together, we can internationalize error responses. ### ### We use Alias to redirect any /error/HTTP_.html.var response to ### our collection of by-error message multi-language collections. We use ### includes to substitute the appropriate text. ### ### You can modify the messages' appearance without changing any of the ### default HTTP_.html.var files by adding the line: ### ### Alias /error/include/ "/your/include/path/" ### ### which allows you to create your own set of files by starting with the ### /include/ files and copying them to /your/include/path/, ### even on a per-VirtualHost basis. The default include files will display ### your Apache version number and your ServerAdmin email address regardless ### of the setting of ServerSignature. ### ### The internationalized error documents require mod_alias, mod_include ### and mod_negotiation. To activate them, uncomment the following 30 lines. ### # Alias /error/ "/var/www/localhost/error" # # # AllowOverride None # Options IncludesNoExec # AddOutputFilter Includes html # AddHandler type-map var # Order allow,deny # Allow from all # LanguagePriority en es de fr sv # ForceLanguagePriority Prefer Fallback # # # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var # ErrorDocument 410 /error/HTTP_GONE.html.var # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var # ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var ### ### Customizable error responses come in three flavors: ### # 1) plain text #ErrorDocument 500 "The server made a boo boo." # # 2) local redirects #ErrorDocument 404 /missing.html # to redirect to local URL /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" # N.B.: You can redirect to a script or a document using server-side-includes. # # 3) external redirects #ErrorDocument 402 http://www.example.com/subscription_info.html # N.B.: Many of the environment variables associated with the original # request will *not* be available to such a script. Options Multiviews ErrorDocument 404 "The document you requested has not been installed on your system." ### ### Customize behaviour based on the browser ### # # The following directives modify normal HTTP response behavior to # handle known problems with browser implementations. # BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 # # The following directive disables redirects on non-GET requests for # a directory that does not include the trailing slash. This fixes a # problem with Microsoft WebFolders which does not appropriately handle # redirects for folders with DAV methods. # BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^gnome-vfs" redirect-carefully BrowserMatch "^WebDAVFS" redirect-carefully # End of browser customization directives ### ### Allow server status reports, with the URL of http://servername/server-status ### Change the ".your_domain.com" to match your domain to enable. ### SetHandler server-status Order deny,allow Deny from all allow from 127.0.0.1 #Allow from .your_domain.com # # ExtendedStatus controls whether Apache will generate "full" status # information (ExtendedStatus On) or just basic information (ExtendedStatus # Off) when the "server-status" handler is called. The default is Off. # #ExtendedStatus On ### ### Allow remote server configuration reports, with the URL of ### http://servername/server-info (requires that mod_info.c be loaded). ### Change the ".your_domain.com" to match your domain to enable. ### SetHandler server-info Order deny,allow Deny from all allow from 127.0.0.1 #Allow from .your_domain.com ### ### Allow remote mod_perl configuration reports, with the URL of ### http://servername/perl-status (requires that mod_perl.c be loaded). ### Change the ".your_domain.com" to match your domain to enable. ### SetHandler perl-script PerlResponseHandler Apache::Status PerlResponseHandler ModPerl::Status Order deny,allow Deny from all Allow from 127.0.0.1 ### ### Proxy Server directives. Uncomment the following lines to ### enable the proxy server: ### # # ProxyRequests On # # Order deny,allow # Deny from all # Allow from .your_domain.com # # # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block # # ProxyVia On # # To enable the cache as well, edit and uncomment the following lines: # (no caching without CacheRoot) # # # CacheRoot "/var/cache/apache2" # CacheSize 5 # CacheGcInterval 4 # CacheMaxExpire 24 # CacheLastModifiedFactor 0.1 # CacheDefaultExpire 1 # #NoCache a-domain.com another-domain.edu joes.garage-sale.com # # # End of proxy directives. ### ### Comment me :) ### # XBitHack on ### ### The mod_deflate module provides the DEFLATE output filter. ### It allows output from your server to be compressed before ### being sent to the client over the network. ### AddOutputFilterByType DEFLATE text/html # DeflateFilterNote - Set a note to report on compression ratio # DeflateFilterNote deflate_ratio # LogFormat "%h %l %u %t \"%r\" %>s %b mod_deflate: %{deflate_ratio}n pct." common_with_deflate_info # CustomLog logs/deflate.log common_with_deflate_info # # Set the Deflate window size (1-15) # DeflateWindowSize 10 # # Set the Deflate Memory Level (1-9) # DeflateMemLevel 6 ### ### This should be changed to whatever you set DocumentRoot to. ### # # This may also be "None", "All", or any combination of "Indexes", # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # Options Indexes FollowSymLinks MultiViews # # This controls which options the .htaccess files in directories can # override. Can also be "All", or any combination of "Options", "FileInfo", # "AuthConfig", and "Limit" # AllowOverride All # # Controls who can get stuff from this server. # Order allow,deny Allow from all ### ### Comment me :) ### AllowOverride All Options -Indexes FollowSymLinks MultiViews ExecCGI Order allow,deny Allow from all ### ### Additional mod_cgid.c settings; mod_cgid has Scriptsock ### for setting UNIX socket for communicating with cgid. ### # Scriptsock /cgisock ### ### This is intended for your world-accessible CGI programs. ### AllowOverride All Options ExecCGI Order allow,deny Allow from all ### ### Access to these CGI programs will be restricted. ### AllowOverride All Options ExecCGI Order deny,allow Deny from all Allow from 127.0.0.1 #allow from .your_domain.com ### ### Control access to UserDir directories. The following is an example ### for a site where these directories are restricted to read-only. ### # # AllowOverride FileInfo AuthConfig Limit # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec # # Order allow,deny # Allow from all # # # Order deny,allow # Deny from all # # ### ### These settings are pretty flexible, and allow for Frontpage and XSSI ### AllowOverride All Options MultiViews -Indexes Includes FollowSymLinks Order allow,deny Allow from all Options +ExecCGI -Includes -Indexes SetHandler cgi-script SetHandler perl-script PerlResponseHandler ModPerl::PerlRun Options -Indexes ExecCGI PerlOptions +ParseHeaders PerlSendHeader On Options -Indexes MultiViews AllowOverride None Order allow,deny Allow from all AddOutputFilterByType DEFLATE text/html Options Indexes FollowSymLinks Order deny,allow Deny from all Allow from 127.0.0.1 #allow from .your_domain.com Options +Includes PerlModule Apache2::ModPerl::Registry #set Apache::Registry Mode for /perl Alias SetHandler perl-script PerlResponseHandler Apache2::ModPerl::Registry PerlResponseHandler ModPerl::Registry Options -Indexes ExecCGI PerlSendHeader On #set Apache::PerlRun Mode for /cgi-perl Alias SetHandler perl-script PerlResponseHandler ModPerl::PerlRun Options -Indexes ExecCGI PerlSendHeader On AliasMatch ^/manual(?:/(?:de|en|fr|ja|ko|ru))?(/.*)?$ "/var/www/localhost/htdocs/manual/$1" Options Indexes AllowOverride None Order allow,deny Allow from all SetHandler type-map SetEnvIf Request_URI ^/manual/de/ prefer-language=de SetEnvIf Request_URI ^/manual/en/ prefer-language=en SetEnvIf Request_URI ^/manual/fr/ prefer-language=fr SetEnvIf Request_URI ^/manual/ja/ prefer-language=ja SetEnvIf Request_URI ^/manual/ko/ prefer-language=ko SetEnvIf Request_URI ^/manual/ru/ prefer-language=ru RedirectMatch 301 ^/manual(?:/(de|en|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2