Attachment 327570 Details for Bug 391957 – current dmesg output with no complains about missing firmware.

current dmesg output with no complains about missing firmware.

dmesg.txt (text/plain), 78.01 KB, created by Stephan Menzel on 2012-10-28 10:22:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stephan Menzel

Created: 2012-10-28 10:22:02 UTC

Size: 78.01 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 3.6.2-gentoo (root@hal9001) (gcc version 4.6.3 (Gentoo 4.6.3 p1.3, pie-0.5.1) ) #1 SMP Fri Oct 26 20:59:27 CEST 2012
>[    0.000000] Command line: root=/dev/sda5 real_root=/dev/sda5 i915.modeset=1 video=uvesafb:mtrr:3,ywrap,1366x768-32@60
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b5ab0fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000b5ab1000-0x00000000b5ab6fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000b5ab7000-0x00000000b5bb9fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000b5bba000-0x00000000b5c0efff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000b5c0f000-0x00000000b5d07fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000b5d08000-0x00000000b5f0efff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000b5f0f000-0x00000000b5f18fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000b5f19000-0x00000000b5f1efff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000b5f1f000-0x00000000b5f62fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000b5f63000-0x00000000b5f9efff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000b5f9f000-0x00000000b5fdffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000b5fe0000-0x00000000b5ffcfff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000b5ffd000-0x00000000b5ffffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI present.
>[    0.000000] DMI: LENOVO 2847DFG/2847DFG, BIOS 6JET86WW (1.44 ) 02/11/2011
>[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] No AGP bridge found
>[    0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-D3FFF write-protect
>[    0.000000]   D4000-DBFFF uncachable
>[    0.000000]   DC000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
>[    0.000000]   1 base 000000000 mask F80000000 write-back
>[    0.000000]   2 base 080000000 mask FC0000000 write-back
>[    0.000000]   3 base 100000000 mask F00000000 write-back
>[    0.000000]   4 base 200000000 mask FC0000000 write-back
>[    0.000000]   5 base 0B8000000 mask FF8000000 uncachable
>[    0.000000]   6 base 0B7E00000 mask FFFE00000 uncachable
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xb6000 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000f74c0-0x000f74cf] mapped at [ffff8800000f74c0]
>[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
>[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
>[    0.000000] init_memory_mapping: [mem 0x00000000-0xb5ffffff]
>[    0.000000]  [mem 0x00000000-0xb5ffffff] page 2M
>[    0.000000] kernel direct mapping tables up to 0xb5ffffff @ [mem 0x1fa4c000-0x1fffffff]
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x23fffffff]
>[    0.000000]  [mem 0x100000000-0x23fffffff] page 2M
>[    0.000000] kernel direct mapping tables up to 0x23fffffff @ [mem 0xb5fd6000-0xb5fdffff]
>[    0.000000] ACPI: RSDP 00000000000f7190 00024 (v04 PTLTD )
>[    0.000000] ACPI: XSDT 00000000b5ff2a5b 0006C (v01 LENOVO TP-6J    00001440  LTP 00000000)
>[    0.000000] ACPI: FACP 00000000b5fe4000 000F4 (v03 LENOVO TP-6J    00001440 ALAN 00000001)
>[    0.000000] ACPI: DSDT 00000000b5fe5000 0A12F (v02 LENOVO TP-6J    00001440 INTL 20050624)
>[    0.000000] ACPI: FACS 00000000b5f9efc0 00040
>[    0.000000] ACPI: HPET 00000000b5ffcd86 00038 (v01 LENOVO TP-6J    00001440 LOHR 0000005A)
>[    0.000000] ACPI: MCFG 00000000b5ffcdbe 0003C (v01 LENOVO TP-6J    00001440 LOHR 0000005A)
>[    0.000000] ACPI: APIC 00000000b5ffcdfa 00068 (v01 LENOVO TP-6J    00001440  LTP 00000000)
>[    0.000000] ACPI: BOOT 00000000b5ffce62 00028 (v01 LENOVO TP-6J    00001440  LTP 00000001)
>[    0.000000] ACPI: SLIC 00000000b5ffce8a 00176 (v01 LENOVO TP-6J    00001440  LTP 00000000)
>[    0.000000] ACPI: SSDT 00000000b5fe3000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
>[    0.000000] ACPI: SSDT 00000000b5fe2000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
>[    0.000000] ACPI: SSDT 00000000b5fe1000 0020F (v01  PmRef    ApTst 00003000 INTL 20050624)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff]
>[    0.000000]   NODE_DATA [mem 0x23fffc000-0x23fffffff]
>[    0.000000]  [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237800000-ffff88023e7fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x23fffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0xb5ab0fff]
>[    0.000000]   node   0: [mem 0xb5ab7000-0xb5bb9fff]
>[    0.000000]   node   0: [mem 0xb5c0f000-0xb5d07fff]
>[    0.000000]   node   0: [mem 0xb5f0f000-0xb5f18fff]
>[    0.000000]   node   0: [mem 0xb5f1f000-0xb5f62fff]
>[    0.000000]   node   0: [mem 0xb5f9f000-0xb5fdffff]
>[    0.000000]   node   0: [mem 0xb5ffd000-0xb5ffffff]
>[    0.000000]   node   0: [mem 0x100000000-0x23fffffff]
>[    0.000000] On node 0 totalpages: 2055374
>[    0.000000]   DMA zone: 56 pages used for memmap
>[    0.000000]   DMA zone: 6 pages reserved
>[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 14280 pages used for memmap
>[    0.000000]   DMA32 zone: 726391 pages, LIFO batch:31
>[    0.000000]   Normal zone: 17920 pages used for memmap
>[    0.000000]   Normal zone: 1292800 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
>[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
>[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
>[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>[    0.000000] PM: Registered nosave memory: 00000000b5ab1000 - 00000000b5ab7000
>[    0.000000] PM: Registered nosave memory: 00000000b5bba000 - 00000000b5c0f000
>[    0.000000] PM: Registered nosave memory: 00000000b5d08000 - 00000000b5f0f000
>[    0.000000] PM: Registered nosave memory: 00000000b5f19000 - 00000000b5f1f000
>[    0.000000] PM: Registered nosave memory: 00000000b5f63000 - 00000000b5f9f000
>[    0.000000] PM: Registered nosave memory: 00000000b5fe0000 - 00000000b5ffd000
>[    0.000000] PM: Registered nosave memory: 00000000b6000000 - 0000000100000000
>[    0.000000] e820: [mem 0xb6000000-0xffffffff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88023fc00000 s74048 r8192 d24256 u1048576
>[    0.000000] pcpu-alloc: s74048 r8192 d24256 u1048576 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2023112
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: root=/dev/sda5 real_root=/dev/sda5 i915.modeset=1 video=uvesafb:mtrr:3,ywrap,1366x768-32@60
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] __ex_table already sorted, skipping sort
>[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Memory: 8029276k/9437184k available (6950k kernel code, 1215688k absent, 192220k reserved, 2773k data, 596k init)
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
>[    0.000000] NR_IRQS:4352 nr_irqs:512 16
>[    0.000000] Extended CMOS year: 2000
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2294.180 MHz processor
>[    0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.36 BogoMIPS (lpj=2294180)
>[    0.001161] pid_max: default: 32768 minimum: 301
>[    0.001266] Security Framework initialized
>[    0.002518] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.007232] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.009492] Mount-cache hash table entries: 256
>[    0.009793] Initializing cgroup subsys debug
>[    0.009874] Initializing cgroup subsys cpuacct
>[    0.009953] Initializing cgroup subsys devices
>[    0.010007] Initializing cgroup subsys freezer
>[    0.010084] Initializing cgroup subsys blkio
>[    0.010186] CPU: Physical Processor ID: 0
>[    0.010263] CPU: Processor Core ID: 0
>[    0.010340] mce: CPU supports 6 MCE banks
>[    0.010424] CPU0: Thermal monitoring enabled (TM2)
>[    0.010505] process: using mwait in idle threads
>[    0.010587] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
>Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
>tlb_flushall_shift is 0xffffffff
>[    0.010786] ACPI: Core revision 20120711
>[    0.018308] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.028396] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU       T4500  @ 2.30GHz stepping 0a
>[    0.028995] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
>[    0.028995] ... version:                2
>[    0.028995] ... bit width:              40
>[    0.028995] ... generic registers:      2
>[    0.028995] ... value mask:             000000ffffffffff
>[    0.028995] ... max period:             000000007fffffff
>[    0.028995] ... fixed-purpose events:   3
>[    0.028995] ... event mask:             0000000700000003
>[    0.029024] smpboot: Booting Node   0, Processors  #1 OK
>[    0.041014] Brought up 2 CPUs
>[    0.041082] smpboot: Total of 2 processors activated (9176.72 BogoMIPS)
>[    0.042041] devtmpfs: initialized
>[    0.042244] PM: Registering ACPI NVS region [mem 0xb5f63000-0xb5f9efff] (245760 bytes)
>[    0.042244] NET: Registered protocol family 16
>[    0.043039] ACPI: bus type pci registered
>[    0.043125] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.043152] PCI: not using MMCONFIG
>[    0.043226] PCI: Using configuration type 1 for base access
>[    0.043336] mtrr: your CPUs had inconsistent variable MTRR settings
>[    0.043336] mtrr: probably your BIOS does not setup all CPUs.
>[    0.043336] mtrr: corrected configuration.
>[    0.052021] bio: create slab <bio-0> at 0
>[    0.052133] ACPI: Added _OSI(Module Device)
>[    0.052133] ACPI: Added _OSI(Processor Device)
>[    0.052167] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.052245] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.054278] ACPI: EC: Look up EC in DSDT
>[    0.058110] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.059091] ACPI: SSDT 00000000b5f1aca0 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
>[    0.059690] ACPI: Dynamic OEM Table Load:
>[    0.059842] ACPI: SSDT           (null) 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
>[    0.060134] ACPI: SSDT 00000000b5f19620 00549 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
>[    0.060714] ACPI: Dynamic OEM Table Load:
>[    0.060993] ACPI: SSDT           (null) 00549 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
>[    0.062068] ACPI: SSDT 00000000b5f1aa20 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
>[    0.062682] ACPI: Dynamic OEM Table Load:
>[    0.062834] ACPI: SSDT           (null) 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
>[    0.063107] ACPI: SSDT 00000000b5f1af20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
>[    0.063468] ACPI: Dynamic OEM Table Load:
>[    0.063620] ACPI: SSDT           (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
>[    0.077178] ACPI: Interpreter enabled
>[    0.077258] ACPI: (supports S0 S3 S4 S5)
>[    0.078061] ACPI: Using IOAPIC for interrupt routing
>[    0.078163] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.079173] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.123133] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>[    0.123244] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.123388] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.124304] PCI host bridge to bus 0000:00
>[    0.124304] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
>[    0.124304] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.124304] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.124304] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.124304] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.124384] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
>[    0.124464] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
>[    0.124547] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
>[    0.124627] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
>[    0.124998] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
>[    0.125042] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
>[    0.125055] pci 0000:00:02.0: reg 10: [mem 0xf2400000-0xf27fffff 64bit]
>[    0.125064] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.125070] pci 0000:00:02.0: reg 20: [io  0x1800-0x1807]
>[    0.125100] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
>[    0.125112] pci 0000:00:02.1: reg 10: [mem 0xf2100000-0xf21fffff 64bit]
>[    0.125201] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
>[    0.125264] pci 0000:00:1a.0: reg 20: [io  0x1820-0x183f]
>[    0.125330] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
>[    0.125387] pci 0000:00:1a.1: reg 20: [io  0x1840-0x185f]
>[    0.125446] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
>[    0.125503] pci 0000:00:1a.2: reg 20: [io  0x1860-0x187f]
>[    0.125571] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
>[    0.125598] pci 0000:00:1a.7: reg 10: [mem 0xf2a04800-0xf2a04bff]
>[    0.125692] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>[    0.125727] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
>[    0.125749] pci 0000:00:1b.0: reg 10: [mem 0xf2a00000-0xf2a03fff 64bit]
>[    0.125831] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.125860] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
>[    0.126003] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.126035] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
>[    0.126120] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.126152] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
>[    0.126237] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.126269] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
>[    0.126354] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.126385] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
>[    0.126469] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>[    0.126502] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
>[    0.126585] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>[    0.126619] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
>[    0.126676] pci 0000:00:1d.0: reg 20: [io  0x1880-0x189f]
>[    0.126733] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
>[    0.126792] pci 0000:00:1d.1: reg 20: [io  0x18a0-0x18bf]
>[    0.126852] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
>[    0.126916] pci 0000:00:1d.2: reg 20: [io  0x18c0-0x18df]
>[    0.126999] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
>[    0.127024] pci 0000:00:1d.7: reg 10: [mem 0xf2a04c00-0xf2a04fff]
>[    0.127114] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.127141] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>[    0.127225] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
>[    0.127378] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
>[    0.127407] pci 0000:00:1f.2: reg 10: [io  0x1818-0x181f]
>[    0.127419] pci 0000:00:1f.2: reg 14: [io  0x180c-0x180f]
>[    0.127430] pci 0000:00:1f.2: reg 18: [io  0x1810-0x1817]
>[    0.127441] pci 0000:00:1f.2: reg 1c: [io  0x1808-0x180b]
>[    0.127452] pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ff]
>[    0.127464] pci 0000:00:1f.2: reg 24: [mem 0xf2a04000-0xf2a047ff]
>[    0.127516] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.127541] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
>[    0.127563] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
>[    0.127593] pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
>[    0.127685] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
>[    0.127710] pci 0000:02:00.0: [197b:2382] type 00 class 0x088000
>[    0.127735] pci 0000:02:00.0: reg 10: [mem 0xf2300000-0xf23000ff]
>[    0.127919] pci 0000:02:00.2: [197b:2381] type 00 class 0x080501
>[    0.127943] pci 0000:02:00.2: reg 10: [mem 0xf2300400-0xf23004ff]
>[    0.128125] pci 0000:02:00.3: [197b:2383] type 00 class 0x088000
>[    0.128149] pci 0000:02:00.3: reg 10: [mem 0xf2300800-0xf23008ff]
>[    0.128328] pci 0000:02:00.4: [197b:2384] type 00 class 0x088000
>[    0.128351] pci 0000:02:00.4: reg 10: [mem 0xf2300c00-0xf2300cff]
>[    0.130004] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.130089] pci 0000:00:1c.0:   bridge window [mem 0xf2300000-0xf23fffff]
>[    0.130154] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
>[    0.130158] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.130305] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff]
>[    0.130309] pci 0000:00:1c.2: PCI bridge to [bus 04]
>[    0.130453] pci_bus 0000:05: busn_res: [bus 05] is inserted under [bus 00-ff]
>[    0.130488] pci 0000:05:00.0: [8086:0084] type 00 class 0x028000
>[    0.130529] pci 0000:05:00.0: reg 10: [mem 0xf2200000-0xf2201fff 64bit]
>[    0.130682] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
>[    0.133001] pci 0000:00:1c.3: PCI bridge to [bus 05]
>[    0.133085] pci 0000:00:1c.3:   bridge window [mem 0xf2200000-0xf22fffff]
>[    0.133147] pci_bus 0000:06: busn_res: [bus 06-07] is inserted under [bus 00-ff]
>[    0.133151] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
>[    0.133234] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
>[    0.133239] pci 0000:00:1c.4:   bridge window [mem 0xf4000000-0xf5ffffff]
>[    0.133246] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
>[    0.133305] pci_bus 0000:08: busn_res: [bus 08] is inserted under [bus 00-ff]
>[    0.133383] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
>[    0.133446] pci 0000:08:00.0: reg 10: [io  0x3000-0x30ff]
>[    0.133558] pci 0000:08:00.0: reg 18: [mem 0xf2004000-0xf2004fff 64bit pref]
>[    0.133626] pci 0000:08:00.0: reg 20: [mem 0xf2000000-0xf2003fff 64bit pref]
>[    0.133670] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>[    0.133824] pci 0000:08:00.0: supports D1 D2
>[    0.133826] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.133979] pci 0000:00:1c.5: PCI bridge to [bus 08]
>[    0.133984] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
>[    0.133994] pci 0000:00:1c.5:   bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
>[    0.134026] pci_bus 0000:09: busn_res: [bus 09] is inserted under [bus 00-ff]
>[    0.134086] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
>[    0.134181] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.134183] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.134185] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.134187] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
>[    0.134190] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
>[    0.134192] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
>[    0.134194] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
>[    0.134238] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.134350] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>[    0.134420] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>[    0.134459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>[    0.134496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>[    0.134532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>[    0.134570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
>[    0.134606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>[    0.134651]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
>[    0.134765]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
>[    0.142053] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.143031] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>[    0.143621] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.144250] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>[    0.144905] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>[    0.145607] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>[    0.146282] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.146872] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>[    0.147536] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.147536] vgaarb: loaded
>[    0.147536] vgaarb: bridge control possible 0000:00:02.0
>[    0.148001] SCSI subsystem initialized
>[    0.148067] ACPI: bus type scsi registered
>[    0.148067] libata version 3.00 loaded.
>[    0.148067] ACPI: bus type usb registered
>[    0.148077] usbcore: registered new interface driver usbfs
>[    0.148082] usbcore: registered new interface driver hub
>[    0.148082] usbcore: registered new device driver usb
>[    0.149016] Advanced Linux Sound Architecture Driver Version 1.0.25.
>[    0.149082] PCI: Using ACPI for IRQ routing
>[    0.159542] PCI: pci_cache_line_size set to 64 bytes
>[    0.159676] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
>[    0.159678] e820: reserve RAM buffer [mem 0xb5ab1000-0xb7ffffff]
>[    0.159681] e820: reserve RAM buffer [mem 0xb5bba000-0xb7ffffff]
>[    0.159684] e820: reserve RAM buffer [mem 0xb5d08000-0xb7ffffff]
>[    0.159687] e820: reserve RAM buffer [mem 0xb5f19000-0xb7ffffff]
>[    0.159690] e820: reserve RAM buffer [mem 0xb5f63000-0xb7ffffff]
>[    0.159692] e820: reserve RAM buffer [mem 0xb5fe0000-0xb7ffffff]
>[    0.159694] e820: reserve RAM buffer [mem 0xb6000000-0xb7ffffff]
>[    0.160031] Bluetooth: Core ver 2.16
>[    0.160102] NET: Registered protocol family 31
>[    0.160102] Bluetooth: HCI device and connection manager initialized
>[    0.160137] Bluetooth: HCI socket layer initialized
>[    0.160215] Bluetooth: L2CAP socket layer initialized
>[    0.160293] Bluetooth: SCO socket layer initialized
>[    0.160381] NetLabel: Initializing
>[    0.160381] NetLabel:  domain hash size = 128
>[    0.160381] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.160381] NetLabel:  unlabeled traffic allowed by default
>[    0.160976] cfg80211: Calling CRDA to update world regulatory domain
>[    0.161079] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>[    0.161355] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>[    0.162997] Switching to clocksource hpet
>[    0.163152] FS-Cache: Loaded
>[    0.163238] CacheFiles: Loaded
>[    0.167446] pnp: PnP ACPI init
>[    0.167533] ACPI: bus type pnp registered
>[    0.167909] pnp 00:00: [bus 00-ff]
>[    0.167912] pnp 00:00: [io  0x0000-0x0cf7 window]
>[    0.167914] pnp 00:00: [io  0x0cf8-0x0cff]
>[    0.167916] pnp 00:00: [io  0x0d00-0xffff window]
>[    0.167919] pnp 00:00: [mem 0x000a0000-0x000bffff window]
>[    0.167921] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>[    0.167923] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>[    0.167925] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>[    0.167927] pnp 00:00: [mem 0x000cc000-0x000cffff window]
>[    0.167929] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>[    0.167931] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>[    0.167933] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>[    0.167935] pnp 00:00: [mem 0x000dc000-0x000dffff window]
>[    0.167937] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>[    0.167939] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>[    0.167942] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>[    0.167944] pnp 00:00: [mem 0x000ec000-0x000effff window]
>[    0.167946] pnp 00:00: [mem 0x000f0000-0x000fffff window]
>[    0.167949] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
>[    0.167952] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>[    0.168075] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>[    0.168117] pnp 00:01: [io  0x0000-0x001f]
>[    0.168119] pnp 00:01: [io  0x0081-0x0091]
>[    0.168121] pnp 00:01: [io  0x0093-0x009f]
>[    0.168123] pnp 00:01: [io  0x00c0-0x00df]
>[    0.168125] pnp 00:01: [dma 4]
>[    0.168176] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.168187] pnp 00:02: [mem 0xff000000-0xffffffff]
>[    0.168240] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.168337] pnp 00:03: [mem 0xfed00000-0xfed003ff]
>[    0.168428] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
>[    0.168511] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
>[    0.168523] pnp 00:04: [io  0x00f0]
>[    0.168535] pnp 00:04: [irq 13]
>[    0.168589] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.168602] pnp 00:05: [io  0x002e-0x002f]
>[    0.168605] pnp 00:05: [io  0x004e-0x004f]
>[    0.168607] pnp 00:05: [io  0x0061]
>[    0.168608] pnp 00:05: [io  0x0063]
>[    0.168610] pnp 00:05: [io  0x0065]
>[    0.168612] pnp 00:05: [io  0x0067]
>[    0.168614] pnp 00:05: [io  0x0070]
>[    0.168616] pnp 00:05: [io  0x0080]
>[    0.168618] pnp 00:05: [io  0x0092]
>[    0.168619] pnp 00:05: [io  0x00b2-0x00b3]
>[    0.168621] pnp 00:05: [io  0x0680-0x069f]
>[    0.168623] pnp 00:05: [io  0x0480-0x048f]
>[    0.168625] pnp 00:05: [io  0xffff]
>[    0.168627] pnp 00:05: [io  0xffff]
>[    0.168629] pnp 00:05: [io  0x0400-0x047f]
>[    0.168631] pnp 00:05: [io  0x1180-0x11ff]
>[    0.168633] pnp 00:05: [io  0x1600-0x16fe]
>[    0.168635] pnp 00:05: [io  0xfe00]
>[    0.168637] pnp 00:05: [io  0x0068]
>[    0.168640] pnp 00:05: [io  0x006c]
>[    0.168642] pnp 00:05: [io  0x0700-0x070f]
>[    0.168723] system 00:05: [io  0x0680-0x069f] has been reserved
>[    0.168805] system 00:05: [io  0x0480-0x048f] has been reserved
>[    0.168884] system 00:05: [io  0xffff] has been reserved
>[    0.168962] system 00:05: [io  0xffff] has been reserved
>[    0.169080] system 00:05: [io  0x0400-0x047f] has been reserved
>[    0.169160] system 00:05: [io  0x1180-0x11ff] has been reserved
>[    0.169240] system 00:05: [io  0x1600-0x16fe] has been reserved
>[    0.169319] system 00:05: [io  0xfe00] has been reserved
>[    0.169400] system 00:05: [io  0x0700-0x070f] has been reserved
>[    0.169483] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.169497] pnp 00:06: [io  0x0070-0x0077]
>[    0.169504] pnp 00:06: [irq 8]
>[    0.169567] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.169604] pnp 00:07: [io  0x0060]
>[    0.169607] pnp 00:07: [io  0x0064]
>[    0.169614] pnp 00:07: [irq 1]
>[    0.169674] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.169689] pnp 00:08: [irq 12]
>[    0.169743] pnp 00:08: Plug and Play ACPI device, IDs LEN0017 PNP0f13 (active)
>[    0.169892] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
>[    0.169894] pnp 00:09: [mem 0xfed10000-0xfed13fff]
>[    0.169896] pnp 00:09: [mem 0xfed18000-0xfed18fff]
>[    0.169898] pnp 00:09: [mem 0xfed19000-0xfed19fff]
>[    0.169900] pnp 00:09: [mem 0xe0000000-0xefffffff]
>[    0.169902] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
>[    0.169904] pnp 00:09: [mem 0xfed40000-0xfed44fff]
>[    0.169985] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.170098] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
>[    0.170180] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.170260] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.170342] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.170423] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.170503] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
>[    0.170585] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.173766] pnp: PnP ACPI: found 10 devices
>[    0.173843] ACPI: ACPI bus type pnp unregistered
>[    0.178612] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
>[    0.178616] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
>[    0.178628] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
>[    0.178631] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
>[    0.178634] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
>[    0.178645] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
>[    0.178649] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
>[    0.178652] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
>[    0.178663] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
>[    0.178666] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
>[    0.178686] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 08] add_size 400000
>[    0.178705] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.178708] pci 0000:00:1c.1: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
>[    0.178710] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.178712] pci 0000:00:1c.2: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
>[    0.178715] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.178717] pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.178720] pci 0000:00:1c.5: res[8]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
>[    0.178722] pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.178724] pci 0000:00:1c.1: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.178727] pci 0000:00:1c.2: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.178729] pci 0000:00:1c.3: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.178734] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
>[    0.178849] pci 0000:00:1c.1: BAR 8: assigned [mem 0xc0200000-0xc03fffff]
>[    0.178932] pci 0000:00:1c.1: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
>[    0.179054] pci 0000:00:1c.2: BAR 8: assigned [mem 0xc0600000-0xc07fffff]
>[    0.179145] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
>[    0.179257] pci 0000:00:1c.3: BAR 9: assigned [mem 0xc0a00000-0xc0bfffff 64bit pref]
>[    0.179373] pci 0000:00:1c.5: BAR 8: assigned [mem 0xc0c00000-0xc10fffff]
>[    0.179456] pci 0000:00:1c.0: BAR 7: assigned [io  0x4000-0x4fff]
>[    0.179536] pci 0000:00:1c.1: BAR 7: assigned [io  0x5000-0x5fff]
>[    0.179616] pci 0000:00:1c.2: BAR 7: assigned [io  0x6000-0x6fff]
>[    0.179696] pci 0000:00:1c.3: BAR 7: assigned [io  0x7000-0x7fff]
>[    0.179778] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc1100000-0xc11000ff 64bit]
>[    0.179904] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.179983] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
>[    0.180073] pci 0000:00:1c.0:   bridge window [mem 0xf2300000-0xf23fffff]
>[    0.180156] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
>[    0.180273] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.180353] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
>[    0.180438] pci 0000:00:1c.1:   bridge window [mem 0xc0200000-0xc03fffff]
>[    0.180521] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
>[    0.180638] pci 0000:00:1c.2: PCI bridge to [bus 04]
>[    0.180718] pci 0000:00:1c.2:   bridge window [io  0x6000-0x6fff]
>[    0.180803] pci 0000:00:1c.2:   bridge window [mem 0xc0600000-0xc07fffff]
>[    0.180885] pci 0000:00:1c.2:   bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
>[    0.181010] pci 0000:00:1c.3: PCI bridge to [bus 05]
>[    0.181087] pci 0000:00:1c.3:   bridge window [io  0x7000-0x7fff]
>[    0.181172] pci 0000:00:1c.3:   bridge window [mem 0xf2200000-0xf22fffff]
>[    0.181255] pci 0000:00:1c.3:   bridge window [mem 0xc0a00000-0xc0bfffff 64bit pref]
>[    0.181374] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
>[    0.181454] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
>[    0.181536] pci 0000:00:1c.4:   bridge window [mem 0xf4000000-0xf5ffffff]
>[    0.181620] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
>[    0.181740] pci 0000:08:00.0: BAR 6: assigned [mem 0xf2020000-0xf203ffff pref]
>[    0.181850] pci 0000:00:1c.5: PCI bridge to [bus 08]
>[    0.181929] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
>[    0.182019] pci 0000:00:1c.5:   bridge window [mem 0xc0c00000-0xc10fffff]
>[    0.182101] pci 0000:00:1c.5:   bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
>[    0.182219] pci 0000:00:1e.0: PCI bridge to [bus 09]
>[    0.182360] pci 0000:00:1e.0: setting latency timer to 64
>[    0.182364] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.182366] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.182369] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.182371] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
>[    0.182373] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
>[    0.182375] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
>[    0.182377] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
>[    0.182380] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
>[    0.182382] pci_bus 0000:02: resource 1 [mem 0xf2300000-0xf23fffff]
>[    0.182384] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
>[    0.182386] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
>[    0.182388] pci_bus 0000:03: resource 1 [mem 0xc0200000-0xc03fffff]
>[    0.182391] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
>[    0.182393] pci_bus 0000:04: resource 0 [io  0x6000-0x6fff]
>[    0.182395] pci_bus 0000:04: resource 1 [mem 0xc0600000-0xc07fffff]
>[    0.182397] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
>[    0.182400] pci_bus 0000:05: resource 0 [io  0x7000-0x7fff]
>[    0.182402] pci_bus 0000:05: resource 1 [mem 0xf2200000-0xf22fffff]
>[    0.182404] pci_bus 0000:05: resource 2 [mem 0xc0a00000-0xc0bfffff 64bit pref]
>[    0.182406] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
>[    0.182408] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf5ffffff]
>[    0.182410] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
>[    0.182413] pci_bus 0000:08: resource 0 [io  0x3000-0x3fff]
>[    0.182415] pci_bus 0000:08: resource 1 [mem 0xc0c00000-0xc10fffff]
>[    0.182417] pci_bus 0000:08: resource 2 [mem 0xf2000000-0xf20fffff 64bit pref]
>[    0.182419] pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7]
>[    0.182421] pci_bus 0000:09: resource 5 [io  0x0d00-0xffff]
>[    0.182423] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.182426] pci_bus 0000:09: resource 7 [mem 0x000d4000-0x000d7fff]
>[    0.182428] pci_bus 0000:09: resource 8 [mem 0x000d8000-0x000dbfff]
>[    0.182430] pci_bus 0000:09: resource 9 [mem 0x000dc000-0x000dffff]
>[    0.182432] pci_bus 0000:09: resource 10 [mem 0xc0000000-0xfebfffff]
>[    0.182482] NET: Registered protocol family 2
>[    0.183327] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>[    0.187629] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.188246] TCP: Hash tables configured (established 524288 bind 65536)
>[    0.188403] TCP: reno registered
>[    0.188499] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.188660] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.188906] NET: Registered protocol family 1
>[    0.189125] RPC: Registered named UNIX socket transport module.
>[    0.189203] RPC: Registered udp transport module.
>[    0.189279] RPC: Registered tcp transport module.
>[    0.189356] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.189450] pci 0000:00:02.0: Boot video device
>[    0.189473] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x003b
>[    0.189475] pci 0000:00:1a.0: Performing full reset
>[    0.189510] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.189512] pci 0000:00:1a.1: Performing full reset
>[    0.189537] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.189539] pci 0000:00:1a.2: Performing full reset
>[    0.189625] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b
>[    0.189626] pci 0000:00:1d.0: Performing full reset
>[    0.189651] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.189653] pci 0000:00:1d.1: Performing full reset
>[    0.189678] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.189680] pci 0000:00:1d.2: Performing full reset
>[    0.189766] PCI: CLS 64 bytes, default 64
>[    0.189795] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.189878] software IO TLB [mem 0xb1ab1000-0xb5ab0fff] (64MB) mapped at [ffff8800b1ab1000-ffff8800b5ab0fff]
>[    0.190063] Simple Boot Flag at 0x36 set to 0x1
>[    0.190639] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
>[    0.190724] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0b
>[    0.190866] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    0.191276] audit: initializing netlink socket (disabled)
>[    0.191368] type=2000 audit(1351418875.190:1): initialized
>[    0.192228] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.192745] NFS: Registering the id_resolver key type
>[    0.192836] Key type id_resolver registered
>[    0.193568] Key type id_legacy registered
>[    0.193790] fuse init (API version 7.20)
>[    0.194044] msgmni has been set to 15682
>[    0.194481] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>[    0.194619] io scheduler noop registered
>[    0.194698] io scheduler deadline registered
>[    0.194787] io scheduler cfq registered (default)
>[    0.195682] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.195839] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.196789] Non-volatile memory driver v1.3
>[    0.196869] Linux agpgart interface v0.103
>[    0.197038] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
>[    0.197232] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>[    0.197947] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
>[    0.198225] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[    0.198476] intel_idle: does not run on family 6 model 23
>[    0.400420] ACPI: AC Adapter [ACAD] (on-line)
>[    0.400662] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>[    0.407484] ACPI: Lid Switch [LID]
>[    0.407639] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>[    0.407755] ACPI: Power Button [PWRB]
>[    0.407892] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>[    0.408031] ACPI: Sleep Button [SLPB]
>[    0.408176] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>[    0.408307] ACPI: Power Button [PWRF]
>[    0.408550] ACPI: Requesting acpi_cpufreq
>[    0.410549] Monitor-Mwait will be used to enter C-1 state
>[    0.410554] Monitor-Mwait will be used to enter C-2 state
>[    0.410557] tsc: Marking TSC unstable due to TSC halts in idle
>[    0.410660] ACPI: acpi_idle registered with cpuidle
>[    0.420068] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.420151] ACPI: Thermal Zone [TZ00] (39 C)
>[    0.420384] [drm] Initialized drm 1.1.0 20060810
>[    0.420738] i915 0000:00:02.0: setting latency timer to 64
>[    0.468494] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    0.468580] [drm] Driver supports precise vblank timestamp query.
>[    0.468706] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    0.887459] fbcon: inteldrmfb (fb0) is primary device
>[    1.181963] ACPI: Battery Slot [BAT1] (battery present)
>[    1.423339] Console: switching to colour frame buffer device 170x48
>[    1.425799] fb0: inteldrmfb frame buffer device
>[    1.425820] drm: registered panic notifier
>[    1.428670] acpi device:07: registered as cooling_device2
>[    1.428769] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    1.428874] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
>[    1.428984] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    1.431186] brd: module loaded
>[    1.432361] loop: module loaded
>[    1.432631] ahci 0000:00:1f.2: version 3.0
>[    1.432717] ahci: SSS flag set, parallel bus scan disabled
>[    1.432788] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
>[    1.432824] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
>[    1.432865] ahci 0000:00:1f.2: setting latency timer to 64
>[    1.439035] scsi0 : ahci
>[    1.439211] scsi1 : ahci
>[    1.439347] scsi2 : ahci
>[    1.439477] scsi3 : ahci
>[    1.439604] scsi4 : ahci
>[    1.439735] scsi5 : ahci
>[    1.440956] ata1: SATA max UDMA/133 abar m2048@0xf2a04000 port 0xf2a04100 irq 19
>[    1.442119] ata2: SATA max UDMA/133 abar m2048@0xf2a04000 port 0xf2a04180 irq 19
>[    1.443252] ata3: DUMMY
>[    1.444368] ata4: DUMMY
>[    1.445450] ata5: SATA max UDMA/133 abar m2048@0xf2a04000 port 0xf2a04300 irq 19
>[    1.446574] ata6: SATA max UDMA/133 abar m2048@0xf2a04000 port 0xf2a04380 irq 19
>[    1.448272] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.449382] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
>[    1.449439] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[    1.449443] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>[    1.450617] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>[    1.451723] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>[    1.451728] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
>[    1.451753] ehci_hcd 0000:00:1a.7: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
>[    1.455651] ehci_hcd 0000:00:1a.7: debug port 1
>[    1.456744] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[    1.456746] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
>[    1.456755] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf2a04800
>[    1.457813] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
>[    1.463018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>[    1.464072] usb usb1: default language 0x0409
>[    1.464079] usb usb1: udev 1, busnum 1, minor = 0
>[    1.464082] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.465150] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.466216] usb usb1: Product: EHCI Host Controller
>[    1.467295] usb usb1: Manufacturer: Linux 3.6.2-gentoo ehci_hcd
>[    1.468364] usb usb1: SerialNumber: 0000:00:1a.7
>[    1.469587] usb usb1: usb_probe_device
>[    1.469590] usb usb1: configuration #1 chosen from 1 choice
>[    1.469598] usb usb1: adding 1-0:1.0 (config #1, interface 0)
>[    1.469643] hub 1-0:1.0: usb_probe_interface
>[    1.469645] hub 1-0:1.0: usb_probe_interface - got id
>[    1.469647] hub 1-0:1.0: USB hub found
>[    1.470686] hub 1-0:1.0: 6 ports detected
>[    1.471704] hub 1-0:1.0: standalone hub
>[    1.471706] hub 1-0:1.0: no power switching (usb 1.0)
>[    1.471708] hub 1-0:1.0: individual port over-current protection
>[    1.471710] hub 1-0:1.0: power on to power good time: 20ms
>[    1.471714] hub 1-0:1.0: local power source is good
>[    1.471716] hub 1-0:1.0: trying to enable port power on non-switchable hub
>[    1.471816] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    1.471820] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    1.472912] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>[    1.473951] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>[    1.473956] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
>[    1.473979] ehci_hcd 0000:00:1d.7: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
>[    1.477866] ehci_hcd 0000:00:1d.7: debug port 1
>[    1.478905] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[    1.478907] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>[    1.478926] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf2a04c00
>[    1.479981] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
>[    1.485017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    1.486073] usb usb2: default language 0x0409
>[    1.486080] usb usb2: udev 1, busnum 2, minor = 128
>[    1.486082] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.487137] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.488173] usb usb2: Product: EHCI Host Controller
>[    1.489210] usb usb2: Manufacturer: Linux 3.6.2-gentoo ehci_hcd
>[    1.490290] usb usb2: SerialNumber: 0000:00:1d.7
>[    1.491441] usb usb2: usb_probe_device
>[    1.491444] usb usb2: configuration #1 chosen from 1 choice
>[    1.491452] usb usb2: adding 2-0:1.0 (config #1, interface 0)
>[    1.491503] hub 2-0:1.0: usb_probe_interface
>[    1.491506] hub 2-0:1.0: usb_probe_interface - got id
>[    1.491508] hub 2-0:1.0: USB hub found
>[    1.492528] hub 2-0:1.0: 6 ports detected
>[    1.493512] hub 2-0:1.0: standalone hub
>[    1.493514] hub 2-0:1.0: no power switching (usb 1.0)
>[    1.493515] hub 2-0:1.0: individual port over-current protection
>[    1.493517] hub 2-0:1.0: power on to power good time: 20ms
>[    1.493522] hub 2-0:1.0: local power source is good
>[    1.493524] hub 2-0:1.0: trying to enable port power on non-switchable hub
>[    1.493719] Initializing USB Mass Storage driver...
>[    1.494744] usbcore: registered new interface driver usb-storage
>[    1.495730] USB Mass Storage support registered.
>[    1.496756] usbcore: registered new interface driver libusual
>[    1.497766] usbcore: registered new interface driver ums-realtek
>[    1.498811] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.505637] i8042: Detected active multiplexing controller, rev 1.1
>[    1.509164] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.510165] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    1.511192] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    1.512214] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    1.513245] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    1.514364] mousedev: PS/2 mouse device common for all mice
>[    1.515780] I2O subsystem v1.325
>[    1.516777] i2o: max drivers = 8
>[    1.517972] rtc_cmos 00:06: RTC can wake from S4
>[    1.519176] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>[    1.520205] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.521272] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
>[    1.522339] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.523601] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
>[    1.524760] cpuidle: using governor ladder
>[    1.525892] cpuidle: using governor menu
>[    1.527202] EFI Variables Facility v0.08 2004-May-17
>[    1.529267] usbcore: registered new interface driver usbhid
>[    1.530391] usbhid: USB HID core driver
>[    1.531565] thinkpad_acpi: ThinkPad ACPI Extras v0.24
>[    1.532686] thinkpad_acpi: http://ibm-acpi.sf.net/
>[    1.533748] thinkpad_acpi: ThinkPad BIOS 6JET86WW (1.44 ), EC 6JHT66WW-1.186000
>[    1.534870] thinkpad_acpi: Lenovo ThinkPad SL510, model 2847DFG
>[    1.536517] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
>[    1.543918] thinkpad_acpi: radio switch found; radios are enabled
>[    1.545024] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
>[    1.546135] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>[    1.547272] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>[    1.549223] thinkpad_acpi: asked for hotkey mask 0x078c7fff, but firmware forced it to 0x008c7fff
>[    1.561818] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
>[    1.571059] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001403 0  ACK POWER sig=k CSC CONNECT
>[    1.571064] hub 1-0:1.0: port 1: status 0501 change 0001
>[    1.595849] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001803 0  ACK POWER sig=j CSC CONNECT
>[    1.595853] hub 2-0:1.0: port 5: status 0501 change 0001
>[    1.595862] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001803 0  ACK POWER sig=j CSC CONNECT
>[    1.595865] hub 2-0:1.0: port 6: status 0501 change 0001
>[    1.671065] hub 1-0:1.0: state 7 ports 6 chg 0002 evt 0000
>[    1.671074] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>[    1.671085] ehci_hcd 0000:00:1a.7: port 1 low speed --> companion
>[    1.686198] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
>[    1.716733] Registered led device: tpacpi::thinklight
>[    1.716803] Registered led device: tpacpi::power
>[    1.716864] Registered led device: tpacpi::standby
>[    1.716931] Registered led device: tpacpi::thinkvantage
>[    1.722056] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    1.722082] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0002
>[    1.722088] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    1.722094] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
>[    1.753100] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.755406] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[    1.756629] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.758322] ata1.00: ATA-8: WDC WD3200BEVT-08A23T1, 02.01A02, max UDMA/133
>[    1.759560] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.761942] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[    1.763190] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.764660] ata1.00: configured for UDMA/133
>[    1.766038] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-0 02.0 PQ: 0 ANSI: 5
>[    1.767631] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>[    1.768968] sd 0:0:0:0: [sda] Write Protect is off
>[    1.770237] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.770261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.770282] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.827982] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
>[    1.827991] hub 2-0:1.0: state 7 ports 6 chg 0060 evt 0000
>[    1.827997] hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
>[    1.853832]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>[    1.855666] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.864788] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
>[    1.866305] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
>[    1.878759] ehci_hcd 0000:00:1d.7: port 5 full speed --> companion
>[    1.878765] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 003801 0  ACK POWER OWNER sig=j CONNECT
>[    1.878770] hub 2-0:1.0: port 5 not reset yet, waiting 50ms
>[    1.892911] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
>[    1.894471] hdaps: supported laptop not found!
>[    1.895889] hdaps: driver init failed (ret=-19)!
>[    1.930034] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    1.930061] hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
>[    1.935372] Netfilter messages via NETLINK v0.30.
>[    1.936799] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[    1.938322] ctnetlink v0.93: registering with nfnetlink.
>[    1.940330] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    1.941738] TCP: cubic registered
>[    1.943053] Initializing XFRM netlink socket
>[    1.945050] NET: Registered protocol family 10
>[    1.946522] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[    1.948052] sit: IPv6 over IPv4 tunneling driver
>[    1.949710] NET: Registered protocol family 17
>[    1.951047] Key type dns_resolver registered
>[    1.954079] PM: Checking hibernation image partition /dev/sda6
>[    1.954096] PM: Hibernation image partition 8:6 present
>[    1.954097] PM: Looking for hibernation image.
>[    1.954306] PM: Image not found (code -22)
>[    1.954308] PM: Hibernation image not present or could not be loaded.
>[    1.954937] console [netcon0] enabled
>[    1.956257] netconsole: network logging started
>[    1.958169] ALSA device list:
>[    1.959502]   #0: HDA Intel at 0xf2a00000 irq 22
>[    1.960812]   #29: ThinkPad Console Audio Control at EC reg 0x30, fw 6JHT66WW-1.186000
>[    1.981260] ehci_hcd 0000:00:1d.7: port 6 reset complete, port enabled
>[    1.981266] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001005 0  ACK POWER sig=se0 PE CONNECT
>[    2.032061] usb 2-6: new high-speed USB device number 3 using ehci_hcd
>[    2.077063] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    2.081104] ata2.00: unexpected _GTF length (8)
>[    2.082388] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LG10, max UDMA/66
>[    2.087071] ata2.00: unexpected _GTF length (8)
>[    2.088332] ata2.00: configured for UDMA/66
>[    2.089758] ehci_hcd 0000:00:1d.7: port 6 reset complete, port enabled
>[    2.089763] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001005 0  ACK POWER sig=se0 PE CONNECT
>[    2.093017] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT30N     LG10 PQ: 0 ANSI: 5
>[    2.099261] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    2.100521] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    2.102023] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    2.102141] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    1.770418] ACPI: Invalid Power Resource to register!
>[    2.103546] ACPI: Invalid Power Resource to register!
>[    2.178161] usb 2-6: skipped 1 descriptor after configuration
>[    2.178164] usb 2-6: skipped 6 descriptors after interface
>[    2.178166] usb 2-6: skipped 1 descriptor after endpoint
>[    2.178168] usb 2-6: skipped 8 descriptors after interface
>[    2.178799] usb 2-6: default language 0x0409
>[    2.183654] usb 2-6: udev 3, busnum 2, minor = 130
>[    2.183657] usb 2-6: New USB device found, idVendor=17ef, idProduct=481b
>[    2.184945] usb 2-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[    2.186227] usb 2-6: Product: Integrated Camera
>[    2.187514] usb 2-6: Manufacturer: Chicony Electronics Co., Ltd.
>[    2.188992] usb 2-6: usb_probe_device
>[    2.188996] usb 2-6: configuration #1 chosen from 1 choice
>[    2.189414] usb 2-6: adding 2-6:1.0 (config #1, interface 0)
>[    2.191497] usb 2-6: adding 2-6:1.1 (config #1, interface 1)
>[    2.191576] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0020
>[    2.191584] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    2.191592] hub 2-0:1.0: port 5, status 0100, change 0001, 12 Mb/s
>[    2.295052] hub 2-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
>[    2.410069] ata5: SATA link down (SStatus 0 SControl 300)
>[    2.717078] ata6: SATA link down (SStatus 0 SControl 300)
>[    2.911889] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
>[    2.913171] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
>[    2.971436] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
>[    3.000288] EXT3-fs (sda5): error: couldn't mount because of unsupported optional features (240)
>[    3.001891] EXT4-fs (sda5): couldn't mount as ext2 due to feature incompatibilities
>[    3.043846] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>[    3.045177] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
>[    3.103474] devtmpfs: mounted
>[    3.104938] Freeing unused kernel memory: 596k freed
>[    3.827031] hub 1-0:1.0: hub_suspend
>[    3.827041] usb usb1: bus auto-suspend, wakeup 1
>[    3.827044] ehci_hcd 0000:00:1a.7: suspend root hub
>[    6.981080] systemd-udevd[1105]: starting version 194
>[    8.272530] uhci_hcd: USB Universal Host Controller Interface driver
>[    8.272575] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[    8.272579] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[    8.273079] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>[    8.273093] uhci_hcd 0000:00:1a.0: detected 2 ports
>[    8.273099] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
>[    8.273101] uhci_hcd 0000:00:1a.0: Performing full reset
>[    8.273119] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
>[    8.273129] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
>[    8.273180] usb usb3: default language 0x0409
>[    8.273188] usb usb3: udev 1, busnum 3, minor = 256
>[    8.273190] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    8.273193] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.273195] usb usb3: Product: UHCI Host Controller
>[    8.273197] usb usb3: Manufacturer: Linux 3.6.2-gentoo uhci_hcd
>[    8.273199] usb usb3: SerialNumber: 0000:00:1a.0
>[    8.273309] usb usb3: usb_probe_device
>[    8.273313] usb usb3: configuration #1 chosen from 1 choice
>[    8.273322] usb usb3: adding 3-0:1.0 (config #1, interface 0)
>[    8.273346] hub 3-0:1.0: usb_probe_interface
>[    8.273348] hub 3-0:1.0: usb_probe_interface - got id
>[    8.273352] hub 3-0:1.0: USB hub found
>[    8.273357] hub 3-0:1.0: 2 ports detected
>[    8.273359] hub 3-0:1.0: standalone hub
>[    8.273360] hub 3-0:1.0: no power switching (usb 1.0)
>[    8.273362] hub 3-0:1.0: individual port over-current protection
>[    8.273364] hub 3-0:1.0: power on to power good time: 2ms
>[    8.273368] hub 3-0:1.0: local power source is good
>[    8.273370] hub 3-0:1.0: trying to enable port power on non-switchable hub
>[    8.273437] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
>[    8.273482] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[    8.273486] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[    8.273830] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>[    8.273842] uhci_hcd 0000:00:1a.1: detected 2 ports
>[    8.273848] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
>[    8.273850] uhci_hcd 0000:00:1a.1: Performing full reset
>[    8.273867] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
>[    8.273894] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
>[    8.273937] usb usb4: default language 0x0409
>[    8.273943] usb usb4: udev 1, busnum 4, minor = 384
>[    8.273946] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    8.273948] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.273951] usb usb4: Product: UHCI Host Controller
>[    8.273953] usb usb4: Manufacturer: Linux 3.6.2-gentoo uhci_hcd
>[    8.273955] usb usb4: SerialNumber: 0000:00:1a.1
>[    8.274069] usb usb4: usb_probe_device
>[    8.274073] usb usb4: configuration #1 chosen from 1 choice
>[    8.274082] usb usb4: adding 4-0:1.0 (config #1, interface 0)
>[    8.274104] hub 4-0:1.0: usb_probe_interface
>[    8.274106] hub 4-0:1.0: usb_probe_interface - got id
>[    8.274109] hub 4-0:1.0: USB hub found
>[    8.274114] hub 4-0:1.0: 2 ports detected
>[    8.274116] hub 4-0:1.0: standalone hub
>[    8.274118] hub 4-0:1.0: no power switching (usb 1.0)
>[    8.274119] hub 4-0:1.0: individual port over-current protection
>[    8.274121] hub 4-0:1.0: power on to power good time: 2ms
>[    8.274125] hub 4-0:1.0: local power source is good
>[    8.274127] hub 4-0:1.0: trying to enable port power on non-switchable hub
>[    8.274192] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
>[    8.274236] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[    8.274240] uhci_hcd 0000:00:1a.2: UHCI Host Controller
>[    8.275694] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>[    8.275709] uhci_hcd 0000:00:1a.2: detected 2 ports
>[    8.275716] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
>[    8.275718] uhci_hcd 0000:00:1a.2: Performing full reset
>[    8.275736] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
>[    8.275746] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
>[    8.275792] usb usb5: default language 0x0409
>[    8.275799] usb usb5: udev 1, busnum 5, minor = 512
>[    8.275801] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    8.275803] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.275806] usb usb5: Product: UHCI Host Controller
>[    8.275808] usb usb5: Manufacturer: Linux 3.6.2-gentoo uhci_hcd
>[    8.275810] usb usb5: SerialNumber: 0000:00:1a.2
>[    8.276253] usb usb5: usb_probe_device
>[    8.276258] usb usb5: configuration #1 chosen from 1 choice
>[    8.276270] usb usb5: adding 5-0:1.0 (config #1, interface 0)
>[    8.276294] hub 5-0:1.0: usb_probe_interface
>[    8.276296] hub 5-0:1.0: usb_probe_interface - got id
>[    8.276300] hub 5-0:1.0: USB hub found
>[    8.276305] hub 5-0:1.0: 2 ports detected
>[    8.276307] hub 5-0:1.0: standalone hub
>[    8.276309] hub 5-0:1.0: no power switching (usb 1.0)
>[    8.276311] hub 5-0:1.0: individual port over-current protection
>[    8.276313] hub 5-0:1.0: power on to power good time: 2ms
>[    8.276317] hub 5-0:1.0: local power source is good
>[    8.276319] hub 5-0:1.0: trying to enable port power on non-switchable hub
>[    8.276389] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
>[    8.276438] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    8.276441] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    8.276502] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>[    8.276511] uhci_hcd 0000:00:1d.0: detected 2 ports
>[    8.276516] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>[    8.276518] uhci_hcd 0000:00:1d.0: Performing full reset
>[    8.276535] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>[    8.276543] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
>[    8.276582] usb usb6: default language 0x0409
>[    8.276588] usb usb6: udev 1, busnum 6, minor = 640
>[    8.276591] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>[    8.276593] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.276595] usb usb6: Product: UHCI Host Controller
>[    8.276597] usb usb6: Manufacturer: Linux 3.6.2-gentoo uhci_hcd
>[    8.276599] usb usb6: SerialNumber: 0000:00:1d.0
>[    8.276676] usb usb6: usb_probe_device
>[    8.276679] usb usb6: configuration #1 chosen from 1 choice
>[    8.276686] usb usb6: adding 6-0:1.0 (config #1, interface 0)
>[    8.276706] hub 6-0:1.0: usb_probe_interface
>[    8.276708] hub 6-0:1.0: usb_probe_interface - got id
>[    8.276710] hub 6-0:1.0: USB hub found
>[    8.276714] hub 6-0:1.0: 2 ports detected
>[    8.276716] hub 6-0:1.0: standalone hub
>[    8.276718] hub 6-0:1.0: no power switching (usb 1.0)
>[    8.276719] hub 6-0:1.0: individual port over-current protection
>[    8.276721] hub 6-0:1.0: power on to power good time: 2ms
>[    8.276725] hub 6-0:1.0: local power source is good
>[    8.276727] hub 6-0:1.0: trying to enable port power on non-switchable hub
>[    8.276789] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
>[    8.276853] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    8.276857] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    8.276960] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>[    8.276971] uhci_hcd 0000:00:1d.1: detected 2 ports
>[    8.276976] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>[    8.276978] uhci_hcd 0000:00:1d.1: Performing full reset
>[    8.276996] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>[    8.277020] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
>[    8.277058] usb usb7: default language 0x0409
>[    8.277064] usb usb7: udev 1, busnum 7, minor = 768
>[    8.277067] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>[    8.277069] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.277071] usb usb7: Product: UHCI Host Controller
>[    8.277073] usb usb7: Manufacturer: Linux 3.6.2-gentoo uhci_hcd
>[    8.277075] usb usb7: SerialNumber: 0000:00:1d.1
>[    8.277168] usb usb7: usb_probe_device
>[    8.277171] usb usb7: configuration #1 chosen from 1 choice
>[    8.277179] usb usb7: adding 7-0:1.0 (config #1, interface 0)
>[    8.277197] hub 7-0:1.0: usb_probe_interface
>[    8.277199] hub 7-0:1.0: usb_probe_interface - got id
>[    8.277202] hub 7-0:1.0: USB hub found
>[    8.277206] hub 7-0:1.0: 2 ports detected
>[    8.277207] hub 7-0:1.0: standalone hub
>[    8.277209] hub 7-0:1.0: no power switching (usb 1.0)
>[    8.277211] hub 7-0:1.0: individual port over-current protection
>[    8.277213] hub 7-0:1.0: power on to power good time: 2ms
>[    8.277216] hub 7-0:1.0: local power source is good
>[    8.277218] hub 7-0:1.0: trying to enable port power on non-switchable hub
>[    8.277281] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
>[    8.277310] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    8.277314] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    8.277357] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>[    8.277366] uhci_hcd 0000:00:1d.2: detected 2 ports
>[    8.277371] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>[    8.277373] uhci_hcd 0000:00:1d.2: Performing full reset
>[    8.277390] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>[    8.277414] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
>[    8.277451] usb usb8: default language 0x0409
>[    8.277458] usb usb8: udev 1, busnum 8, minor = 896
>[    8.277460] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>[    8.277462] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.277464] usb usb8: Product: UHCI Host Controller
>[    8.277466] usb usb8: Manufacturer: Linux 3.6.2-gentoo uhci_hcd
>[    8.277468] usb usb8: SerialNumber: 0000:00:1d.2
>[    8.277568] usb usb8: usb_probe_device
>[    8.277571] usb usb8: configuration #1 chosen from 1 choice
>[    8.277581] usb usb8: adding 8-0:1.0 (config #1, interface 0)
>[    8.277602] hub 8-0:1.0: usb_probe_interface
>[    8.277604] hub 8-0:1.0: usb_probe_interface - got id
>[    8.277607] hub 8-0:1.0: USB hub found
>[    8.277611] hub 8-0:1.0: 2 ports detected
>[    8.277613] hub 8-0:1.0: standalone hub
>[    8.277615] hub 8-0:1.0: no power switching (usb 1.0)
>[    8.277616] hub 8-0:1.0: individual port over-current protection
>[    8.277618] hub 8-0:1.0: power on to power good time: 2ms
>[    8.277622] hub 8-0:1.0: local power source is good
>[    8.277624] hub 8-0:1.0: trying to enable port power on non-switchable hub
>[    8.277698] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
>[    8.279734] Linux video capture interface: v2.00
>[    8.304142] sdhci: Secure Digital Host Controller Interface driver
>[    8.304147] sdhci: Copyright(c) Pierre Ossman
>[    8.345713] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    8.346189] r8169 0000:08:00.0: eth0: RTL8168d/8111d at 0xffffc900115a6000, 60:eb:69:7e:91:c5, XID 081000c0 IRQ 17
>[    8.346193] r8169 0000:08:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[    8.373184] uhci_hcd 0000:00:1a.0: port 1 portsc 01ab,00
>[    8.373191] hub 3-0:1.0: port 1: status 0301 change 0003
>[    8.374037] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    8.376061] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    8.376068] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    8.377034] uhci_hcd 0000:00:1d.2: port 1 portsc 0093,00
>[    8.377038] hub 8-0:1.0: port 1: status 0101 change 0001
>[    8.377049] uhci_hcd 0000:00:1d.2: port 2 portsc 0082,00
>[    8.377058] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    8.473040] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
>[    8.473055] hub 3-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
>[    8.575038] usb 3-1: new low-speed USB device number 2 using uhci_hcd
>[    8.645715] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 0)
>[    8.645833] Registered led device: mmc0::
>[    8.653729] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
>[    8.653736] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    8.653740] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
>[    8.653744] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    8.653745] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    8.668024] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
>[    8.668050] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 0)
>[    8.668084] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
>[    8.680382] uvcvideo: Unable to create debugfs directory
>[    8.680407] uvcvideo 2-6:1.0: usb_probe_interface
>[    8.680411] uvcvideo 2-6:1.0: usb_probe_interface - got id
>[    8.680430] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:481b)
>[    8.696912] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input8
>[    8.697053] usbcore: registered new interface driver uvcvideo
>[    8.697055] USB Video Class driver (1.1.1)
>[    8.698206] Intel(R) Wireless WiFi driver for Linux, in-tree:d
>[    8.698210] Copyright(c) 2003-2012 Intel Corporation
>[    8.698319] iwlwifi 0000:05:00.0: pci_resource_len = 0x00002000
>[    8.698321] iwlwifi 0000:05:00.0: pci_resource_base = ffffc900116bc000
>[    8.698324] iwlwifi 0000:05:00.0: HW Revision ID = 0x0
>[    8.698329] iwlwifi 0000:05:00.0: pci_enable_msi failed(0Xffffffff)
>[    8.719189] usb 3-1: skipped 1 descriptor after interface
>[    8.719194] usb 3-1: udev 2, busnum 3, minor = 257
>[    8.719197] usb 3-1: New USB device found, idVendor=062a, idProduct=0000
>[    8.719199] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    8.719291] usb 3-1: usb_probe_device
>[    8.719295] usb 3-1: configuration #1 chosen from 1 choice
>[    8.723423] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
>[    8.723464] usbhid 3-1:1.0: usb_probe_interface
>[    8.723467] usbhid 3-1:1.0: usb_probe_interface - got id
>[    8.739315] input: HID 062a:0000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input9
>[    8.739421] hid-generic 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1a.0-1/input0
>[    8.739463] hub 8-0:1.0: state 7 ports 2 chg 0002 evt 0000
>[    8.739476] hub 8-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
>[    8.771069] iwlwifi 0000:05:00.0: loaded firmware version 39.31.5.1 build 35138
>[    8.841031] usb 8-1: new full-speed USB device number 2 using uhci_hcd
>[    8.985018] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
>[    8.985023] iwldvm: Copyright(c) 2003-2012 Intel Corporation
>[    8.985061] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUG enabled
>[    8.985063] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
>[    8.985065] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
>[    8.985067] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
>[    8.985069] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_P2P disabled
>[    8.985072] iwlwifi 0000:05:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
>[    8.985114] iwlwifi 0000:05:00.0: L1 Enabled; Disabling L0S
>[    8.990498] usb 8-1: skipped 1 descriptor after interface
>[    8.992491] iwlwifi 0000:05:00.0: RF_KILL bit toggled to enable radio.
>[    8.996477] usb 8-1: default language 0x0409
>[    9.004368] iwlwifi 0000:05:00.0: device EEPROM VER=0x15d, CALIB=0x6
>[    9.004370] iwlwifi 0000:05:00.0: Device SKU: 0x50
>[    9.004372] iwlwifi 0000:05:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
>[    9.004489] Registered led device: phy0-led
>[    9.004569] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>[    9.011487] usb 8-1: udev 2, busnum 8, minor = 897
>[    9.011491] usb 8-1: New USB device found, idVendor=0a5c, idProduct=217f
>[    9.011494] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    9.011497] usb 8-1: Product: Broadcom Bluetooth Device
>[    9.011499] usb 8-1: Manufacturer: Broadcom Corp
>[    9.011501] usb 8-1: SerialNumber: 5CAC4CCD14BF
>[    9.011639] usb 8-1: usb_probe_device
>[    9.011644] usb 8-1: configuration #1 chosen from 1 choice
>[    9.014486] usb 8-1: adding 8-1:1.0 (config #1, interface 0)
>[    9.014561] usb 8-1: adding 8-1:1.1 (config #1, interface 1)
>[    9.014603] usb 8-1: adding 8-1:1.2 (config #1, interface 2)
>[    9.014644] usb 8-1: adding 8-1:1.3 (config #1, interface 3)
>[    9.278761] usb 2-6: link qh4-0001/ffff8802337569c0 start 1 [1/0 us]
>[    9.278814] usb 2-6: unlink qh4-0001/ffff8802337569c0 start 1 [1/0 us]
>[    9.454033] usb usb4: suspend_rh (auto-stop)
>[    9.454065] usb usb5: suspend_rh (auto-stop)
>[    9.454092] usb usb6: suspend_rh (auto-stop)
>[    9.454118] usb usb7: suspend_rh (auto-stop)
>[   10.474653] psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
>[   10.704025] hub 4-0:1.0: hub_suspend
>[   10.704034] usb usb4: bus auto-suspend, wakeup 1
>[   10.704037] usb usb4: suspend_rh
>[   10.712020] hub 5-0:1.0: hub_suspend
>[   10.712026] usb usb5: bus auto-suspend, wakeup 1
>[   10.712029] usb usb5: suspend_rh
>[   10.712052] hub 6-0:1.0: hub_suspend
>[   10.712056] usb usb6: bus auto-suspend, wakeup 1
>[   10.712058] usb usb6: suspend_rh
>[   10.712081] hub 7-0:1.0: hub_suspend
>[   10.712084] usb usb7: bus auto-suspend, wakeup 1
>[   10.712086] usb usb7: suspend_rh
>[   10.782805] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input10
>[   11.706070] usb 2-6: usb auto-suspend, wakeup 0
>[   12.701133] EXT4-fs (sda5): re-mounted. Opts: (null)
>[   13.024965] Adding 5927948k swap on /dev/sda6.  Priority:-1 extents:1 across:5927948k 
>[   13.717060] hub 2-0:1.0: hub_suspend
>[   13.717071] usb usb2: bus auto-suspend, wakeup 1
>[   13.717074] ehci_hcd 0000:00:1d.7: suspend root hub
>[   17.401368] r8169 0000:08:00.0: eth0: link down
>[   17.401410] r8169 0000:08:00.0: eth0: link down
>[   17.401412] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   19.044907] r8169 0000:08:00.0: eth0: link up
>[   19.044918] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[   23.814892] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
>[   53.063129] ata1.00: configured for UDMA/133
>[   53.063137] ata1: EH complete
>[   54.191837] EXT4-fs (sda5): re-mounted. Opts: commit=0
>[   92.211064] usb usb2: usb auto-resume
>[   92.211071] ehci_hcd 0000:00:1d.7: resume root hub
>[   92.252045] hub 2-0:1.0: hub_resume
>[   92.252073] hub 2-0:1.0: port 6: status 0507 change 0000
>[   92.252085] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
>[   92.252099] usb 2-6: usb auto-resume
>[   92.278110] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001005 0  ACK POWER sig=se0 PE CONNECT
>[   92.289044] usb 2-6: finish resume
>[   92.290821] usb 2-6: disable remote wakeup, status -32
>[   92.298905] ehci_hcd 0000:00:1d.7: reused qh ffff8802337569c0 schedule
>[   92.298912] usb 2-6: link qh4-0001/ffff8802337569c0 start 1 [1/0 us]
>[   92.327419] usb 2-6: unlink qh4-0001/ffff8802337569c0 start 1 [1/0 us]
>[   94.704046] usb 2-6: usb auto-suspend, wakeup 0
>[   96.715061] hub 2-0:1.0: hub_suspend
>[   96.715072] usb usb2: bus auto-suspend, wakeup 1
>[   96.715075] ehci_hcd 0000:00:1d.7: suspend root hub
>[  101.924835] usb usb2: usb auto-resume
>[  101.924843] ehci_hcd 0000:00:1d.7: resume root hub
>[  101.965054] hub 2-0:1.0: hub_resume
>[  101.965081] hub 2-0:1.0: port 6: status 0507 change 0000
>[  101.965096] usb 2-6: usb auto-resume
>[  101.965103] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
>[  101.991131] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001005 0  ACK POWER sig=se0 PE CONNECT
>[  102.002030] usb 2-6: finish resume
>[  102.002899] usb 2-6: disable remote wakeup, status -32
>[  102.011182] ehci_hcd 0000:00:1d.7: reused qh ffff8802337569c0 schedule
>[  102.011189] usb 2-6: link qh4-0001/ffff8802337569c0 start 1 [1/0 us]
>[  102.011372] usb 2-6: unlink qh4-0001/ffff8802337569c0 start 1 [1/0 us]
>[  104.712095] usb 2-6: usb auto-suspend, wakeup 0
>[  106.723056] hub 2-0:1.0: hub_suspend
>[  106.723068] usb usb2: bus auto-suspend, wakeup 1
>[  106.723071] ehci_hcd 0000:00:1d.7: suspend root hub

Actions: View

Attachments on bug 391957: 293819 | 327570 | 328482