[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.2-gentoo (root@thinkpad) (gcc version 4.6.3 (Gentoo 4.6.3 p1.6, pie-0.5.2) ) #1 SMP PREEMPT Sun Oct 14 19:31:20 CEST 2012 [ 0.000000] Command line: BOOT_IMAGE=/boot/bzImage root=/dev/sda3 init=/usr/bin/systemd fsck.mode=force [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf6affff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf6b0000-0x00000000bf6cbfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf6cc000-0x00000000bf6fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf700000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: LENOVO 64669YG/64669YG, BIOS 7LETC5WW (2.25 ) 11/14/2008 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x13c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 13C000000 mask FFC000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 5 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xbf700000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbf6affff] [ 0.000000] [mem 0x00000000-0xbf5fffff] page 2M [ 0.000000] [mem 0xbf600000-0xbf6affff] page 4k [ 0.000000] kernel direct mapping tables up to 0xbf6affff @ [mem 0x1fa00000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x13bffffff @ [mem 0xbf6aa000-0xbf6affff] [ 0.000000] ACPI: RSDP 00000000000f68c0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000bf6bb647 00094 (v01 LENOVO TP-7L 00002250 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bf6bb700 000F4 (v03 LENOVO TP-7L 00002250 LNVO 00000001) [ 0.000000] ACPI BIOS Bug: Warning: 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20120711/tbfadt-567) [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120711/tbfadt-598) [ 0.000000] ACPI: DSDT 00000000bf6bbb1d 10009 (v01 LENOVO TP-7L 00002250 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bf6e4000 00040 [ 0.000000] ACPI: SSDT 00000000bf6bb8b4 00269 (v01 LENOVO TP-7L 00002250 MSFT 03000000) [ 0.000000] ACPI: ECDT 00000000bf6cbb26 00052 (v01 LENOVO TP-7L 00002250 LNVO 00000001) [ 0.000000] ACPI: TCPA 00000000bf6cbb78 00032 (v02 LENOVO TP-7L 00002250 LNVO 00000001) [ 0.000000] ACPI: APIC 00000000bf6cbbaa 00068 (v01 LENOVO TP-7L 00002250 LNVO 00000001) [ 0.000000] ACPI: MCFG 00000000bf6cbc12 0003C (v01 LENOVO TP-7L 00002250 LNVO 00000001) [ 0.000000] ACPI: HPET 00000000bf6cbc4e 00038 (v01 LENOVO TP-7L 00002250 LNVO 00000001) [ 0.000000] ACPI: SLIC 00000000bf6cbdf0 00176 (v01 LENOVO TP-7L 00002250 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bf6cbf66 00028 (v01 LENOVO TP-7L 00002250 LTP 00000001) [ 0.000000] ACPI: ASF! 00000000bf6cbf8e 00072 (v16 LENOVO TP-7L 00002250 PTL 00000001) [ 0.000000] ACPI: SSDT 00000000bf6e26d9 0025F (v01 LENOVO TP-7L 00002250 INTL 20050513) [ 0.000000] ACPI: SSDT 00000000bf6e2938 000A6 (v01 LENOVO TP-7L 00002250 INTL 20050513) [ 0.000000] ACPI: SSDT 00000000bf6e29de 004F7 (v01 LENOVO TP-7L 00002250 INTL 20050513) [ 0.000000] ACPI: SSDT 00000000bf6e2ed5 001D8 (v01 LENOVO TP-7L 00002250 INTL 20050513) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T61 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff880137600000-ffff88013b5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13bffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xbf6affff] [ 0.000000] node 0: [mem 0x100000000-0x13bffffff] [ 0.000000] On node 0 totalpages: 1029693 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 763632 pages, LIFO batch:31 [ 0.000000] Normal zone: 3840 pages used for memmap [ 0.000000] Normal zone: 241920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf6b0000 - 00000000bf6cc000 [ 0.000000] PM: Registered nosave memory: 00000000bf6cc000 - 00000000bf700000 [ 0.000000] PM: Registered nosave memory: 00000000bf700000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88013bc00000 s74176 r8192 d24128 u1048576 [ 0.000000] pcpu-alloc: s74176 r8192 d24128 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1009463 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/bzImage root=/dev/sda3 init=/usr/bin/systemd fsck.mode=force [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3970832k/5177344k available (6234k kernel code, 1058572k absent, 147940k reserved, 2489k data, 512k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2094.895 MHz processor [ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.79 BogoMIPS (lpj=2094895) [ 0.001171] pid_max: default: 32768 minimum: 301 [ 0.001277] Security Framework initialized [ 0.001370] Mount-cache hash table entries: 256 [ 0.002206] Initializing cgroup subsys cpuacct [ 0.002287] Initializing cgroup subsys devices [ 0.002371] Initializing cgroup subsys freezer [ 0.002453] Initializing cgroup subsys blkio [ 0.002558] CPU: Physical Processor ID: 0 [ 0.002640] CPU: Processor Core ID: 0 [ 0.002721] mce: CPU supports 6 MCE banks [ 0.002809] CPU0: Thermal monitoring enabled (TM2) [ 0.002891] process: using mwait in idle threads [ 0.003006] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 tlb_flushall_shift is 0xffffffff [ 0.003192] ACPI: Core revision 20120711 [ 0.011223] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.021320] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 [ 0.021996] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.021996] ... version: 2 [ 0.021996] ... bit width: 40 [ 0.021996] ... generic registers: 2 [ 0.021996] ... value mask: 000000ffffffffff [ 0.021996] ... max period: 000000007fffffff [ 0.021996] ... fixed-purpose events: 3 [ 0.021996] ... event mask: 0000000700000003 [ 0.032999] smpboot: Booting Node 0, Processors #1 OK [ 0.044993] TSC synchronization [CPU#0 -> CPU#1]: [ 0.044993] Measured 1089470 cycles TSC warp between CPUs, turning off TSC clock. [ 0.044993] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 0.045018] Brought up 2 CPUs [ 0.045076] smpboot: Total of 2 processors activated (8379.58 BogoMIPS) [ 0.046049] devtmpfs: initialized [ 0.046236] PM: Registering ACPI NVS region [mem 0xbf6cc000-0xbf6fffff] (212992 bytes) [ 0.046236] NET: Registered protocol family 16 [ 0.046411] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.046520] ACPI: bus type pci registered [ 0.047040] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.047152] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.053868] PCI: Using configuration type 1 for base access [ 0.055317] bio: create slab at 0 [ 0.055317] ACPI: Added _OSI(Module Device) [ 0.055317] ACPI: Added _OSI(Processor Device) [ 0.055317] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.055317] ACPI: Added _OSI(Processor Aggregator Device) [ 0.055355] ACPI: Added _OSI(Linux) [ 0.057687] ACPI: EC: EC description table is found, configuring boot EC [ 0.062658] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI [ 0.099210] ACPI: SSDT 00000000bf6e1b32 002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.099884] ACPI: Dynamic OEM Table Load: [ 0.100068] ACPI: SSDT (null) 002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.100419] ACPI: SSDT 00000000bf6e1e7b 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.101128] ACPI: Dynamic OEM Table Load: [ 0.101942] ACPI: SSDT (null) 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.102177] ACPI: SSDT 00000000bf6e1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.103508] ACPI: Dynamic OEM Table Load: [ 0.103716] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.104055] ACPI: SSDT 00000000bf6e1df6 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.104713] ACPI: Dynamic OEM Table Load: [ 0.104913] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.105171] ACPI: Interpreter enabled [ 0.105248] ACPI: (supports S0 S3 S4 S5) [ 0.105248] ACPI: Using IOAPIC for interrupt routing [ 0.109027] ACPI: Power Resource [PUBS] (on) [ 0.134454] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 [ 0.181179] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.181272] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.182176] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.182300] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.182446] PCI host bridge to bus 0000:00 [ 0.182535] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff] [ 0.182537] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.182633] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.182723] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.182825] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.182917] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.182975] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.183066] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.183159] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff] [ 0.183252] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff] [ 0.183358] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 [ 0.183406] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000 [ 0.183419] pci 0000:00:02.0: reg 10: [mem 0xf8100000-0xf81fffff 64bit] [ 0.183428] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.183434] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.183470] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000 [ 0.183482] pci 0000:00:02.1: reg 10: [mem 0xf8200000-0xf82fffff 64bit] [ 0.183560] pci 0000:00:03.0: [8086:2a04] type 00 class 0x078000 [ 0.183596] pci 0000:00:03.0: reg 10: [mem 0xfe226800-0xfe22680f 64bit] [ 0.183725] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.183750] pci 0000:00:03.2: [8086:2a06] type 00 class 0x010185 [ 0.183769] pci 0000:00:03.2: reg 10: [io 0x1828-0x182f] [ 0.183776] pci 0000:00:03.2: reg 14: [io 0x180c-0x180f] [ 0.183784] pci 0000:00:03.2: reg 18: [io 0x1820-0x1827] [ 0.183793] pci 0000:00:03.2: reg 1c: [io 0x1808-0x180b] [ 0.183801] pci 0000:00:03.2: reg 20: [io 0x1810-0x181f] [ 0.183861] pci 0000:00:03.3: [8086:2a07] type 00 class 0x070002 [ 0.183877] pci 0000:00:03.3: reg 10: [io 0x1830-0x1837] [ 0.183889] pci 0000:00:03.3: reg 14: [mem 0xfe024000-0xfe024fff] [ 0.184158] pci 0000:00:19.0: [8086:1049] type 00 class 0x020000 [ 0.184191] pci 0000:00:19.0: reg 10: [mem 0xfe000000-0xfe01ffff] [ 0.184210] pci 0000:00:19.0: reg 14: [mem 0xfe025000-0xfe025fff] [ 0.184223] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f] [ 0.184315] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.184349] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 [ 0.184447] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f] [ 0.184527] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 [ 0.184629] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f] [ 0.184733] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 [ 0.184767] pci 0000:00:1a.7: reg 10: [mem 0xfe226c00-0xfe226fff] [ 0.184935] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.184988] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 0.185021] pci 0000:00:1b.0: reg 10: [mem 0xfe020000-0xfe023fff 64bit] [ 0.185135] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.185178] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 0.185297] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.185346] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 [ 0.185462] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.185514] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400 [ 0.185626] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.185669] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400 [ 0.185789] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.185838] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400 [ 0.185959] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.186013] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 0.186128] pci 0000:00:1d.0: reg 20: [io 0x18a0-0x18bf] [ 0.186210] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 0.186318] pci 0000:00:1d.1: reg 20: [io 0x18c0-0x18df] [ 0.186395] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 0.186496] pci 0000:00:1d.2: reg 20: [io 0x18e0-0x18ff] [ 0.186600] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 0.186644] pci 0000:00:1d.7: reg 10: [mem 0xfe227000-0xfe2273ff] [ 0.186833] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.186881] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.186991] pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100 [ 0.187155] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.187283] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.187381] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) [ 0.187510] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) [ 0.187635] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) [ 0.187837] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a [ 0.187870] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.187894] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.187917] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.187941] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.187964] pci 0000:00:1f.1: reg 20: [io 0x1c00-0x1c0f] [ 0.188063] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 [ 0.188094] pci 0000:00:1f.2: reg 10: [io 0x1c50-0x1c57] [ 0.188107] pci 0000:00:1f.2: reg 14: [io 0x1c44-0x1c47] [ 0.188120] pci 0000:00:1f.2: reg 18: [io 0x1c48-0x1c4f] [ 0.188136] pci 0000:00:1f.2: reg 1c: [io 0x1c40-0x1c43] [ 0.188152] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f] [ 0.188167] pci 0000:00:1f.2: reg 24: [mem 0xfe226000-0xfe2267ff] [ 0.188239] pci 0000:00:1f.2: PME# supported from D3hot [ 0.188271] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 0.188293] pci 0000:00:1f.3: reg 10: [mem 0xfe227400-0xfe2274ff] [ 0.188339] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f] [ 0.188456] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff] [ 0.188462] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.188562] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.188571] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff] [ 0.188581] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref] [ 0.188644] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff] [ 0.188716] pci 0000:03:00.0: [8086:4230] type 00 class 0x028000 [ 0.188766] pci 0000:03:00.0: reg 10: [mem 0xdf3fe000-0xdf3fffff 64bit] [ 0.188993] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.191029] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.191130] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.191139] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff] [ 0.191149] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref] [ 0.191215] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff] [ 0.191221] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.191323] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.191332] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff] [ 0.191345] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref] [ 0.191403] pci_bus 0000:05: busn_res: [bus 05-0c] is inserted under [bus 00-ff] [ 0.191409] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.191508] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.191516] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff] [ 0.191528] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref] [ 0.191591] pci_bus 0000:0d: busn_res: [bus 0d-14] is inserted under [bus 00-ff] [ 0.191597] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.191691] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 0.191698] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.191710] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref] [ 0.191749] pci_bus 0000:15: busn_res: [bus 15-18] is inserted under [bus 00-ff] [ 0.191773] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700 [ 0.191815] pci 0000:15:00.0: reg 10: [mem 0xf8300000-0xf8300fff] [ 0.191881] pci 0000:15:00.0: supports D1 D2 [ 0.191883] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.191933] pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010 [ 0.191973] pci 0000:15:00.1: reg 10: [mem 0xf8301000-0xf83017ff] [ 0.192143] pci 0000:15:00.1: supports D1 D2 [ 0.192145] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192190] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500 [ 0.192229] pci 0000:15:00.2: reg 10: [mem 0xf8301800-0xf83018ff] [ 0.192399] pci 0000:15:00.2: supports D1 D2 [ 0.192401] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192444] pci 0000:15:00.3: [1180:0843] type 00 class 0x088000 [ 0.192483] pci 0000:15:00.3: reg 10: [mem 0xf8301c00-0xf8301cff] [ 0.192665] pci 0000:15:00.3: supports D1 D2 [ 0.192667] pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192712] pci 0000:15:00.4: [1180:0592] type 00 class 0x088000 [ 0.192753] pci 0000:15:00.4: reg 10: [mem 0xf8302000-0xf83020ff] [ 0.192924] pci 0000:15:00.4: supports D1 D2 [ 0.192926] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192982] pci 0000:15:00.5: [1180:0852] type 00 class 0x088000 [ 0.193022] pci 0000:15:00.5: reg 10: [mem 0xf8302400-0xf83024ff] [ 0.193200] pci 0000:15:00.5: supports D1 D2 [ 0.193202] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold [ 0.193333] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) [ 0.193435] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff] [ 0.193442] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff] [ 0.193455] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref] [ 0.193457] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.193459] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.193462] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.193464] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.193466] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.193469] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.193471] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.193474] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4bfff] (subtractive decode) [ 0.193542] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18]) [ 0.193549] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17 [ 0.193552] pci_bus 0000:16: busn_res: [bus 16-17] is inserted under [bus 15-18] [ 0.193599] pci_bus 0000:00: on NUMA node 0 [ 0.193603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.193689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.193712] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.193735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.193758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.193783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.193808] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.194038] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.194431] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.199320] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 0.199887] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.200443] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.201028] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.201591] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.202139] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.202702] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.203269] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.203821] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.203983] vgaarb: loaded [ 0.204058] vgaarb: bridge control possible 0000:00:02.0 [ 0.204199] SCSI subsystem initialized [ 0.204276] ACPI: bus type scsi registered [ 0.204360] libata version 3.00 loaded. [ 0.204360] ACPI: bus type usb registered [ 0.204360] usbcore: registered new interface driver usbfs [ 0.204360] usbcore: registered new interface driver hub [ 0.204360] usbcore: registered new device driver usb [ 0.204360] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.204360] PCI: Using ACPI for IRQ routing [ 0.207548] PCI: pci_cache_line_size set to 64 bytes [ 0.207699] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.207701] e820: reserve RAM buffer [mem 0xbf6b0000-0xbfffffff] [ 0.207789] Bluetooth: Core ver 2.16 [ 0.207874] NET: Registered protocol family 31 [ 0.207952] Bluetooth: HCI device and connection manager initialized [ 0.207971] Bluetooth: HCI socket layer initialized [ 0.208049] Bluetooth: L2CAP socket layer initialized [ 0.208130] Bluetooth: SCO socket layer initialized [ 0.208257] NetLabel: Initializing [ 0.208257] NetLabel: domain hash size = 128 [ 0.208257] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.208309] NetLabel: unlabeled traffic allowed by default [ 0.208396] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.208396] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.209128] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.210973] cfg80211: Calling CRDA to update world regulatory domain [ 0.213985] Switching to clocksource hpet [ 0.215955] pnp: PnP ACPI init [ 0.216047] ACPI: bus type pnp registered [ 0.216444] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.216447] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 0.216449] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 0.216451] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 0.216453] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 0.216455] pnp 00:00: [mem 0x000d0000-0x000d3fff] [ 0.216457] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled] [ 0.216459] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled] [ 0.216462] pnp 00:00: [mem 0x000dc000-0x000dbfff disabled] [ 0.216464] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 0.216466] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 0.216468] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 0.216470] pnp 00:00: [mem 0x000ec000-0x000effff] [ 0.216472] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 0.216474] pnp 00:00: [mem 0x00100000-0xbfffffff] [ 0.216476] pnp 00:00: [mem 0xfec00000-0xfed3ffff] [ 0.216478] pnp 00:00: [mem 0xfed4c000-0xffffffff] [ 0.216542] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.216624] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.216705] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.216787] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.216867] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.216948] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.217041] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.217122] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.217204] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.217285] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.217366] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.217447] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.217528] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.217610] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.217692] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.217711] pnp 00:01: [bus 00-ff] [ 0.217714] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.217716] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.217718] pnp 00:01: [io 0x0d00-0xffff window] [ 0.217721] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.217723] pnp 00:01: [mem 0x000c0000-0x000c3fff window] [ 0.217727] pnp 00:01: [mem 0x000c4000-0x000c7fff window] [ 0.217729] pnp 00:01: [mem 0x000c8000-0x000cbfff window] [ 0.217732] pnp 00:01: [mem 0x000cc000-0x000cffff window] [ 0.217734] pnp 00:01: [mem 0x000d0000-0x000d3fff window] [ 0.217736] pnp 00:01: [mem 0x000d4000-0x000d7fff window] [ 0.217738] pnp 00:01: [mem 0x000d8000-0x000dbfff window] [ 0.217740] pnp 00:01: [mem 0x000dc000-0x000dffff window] [ 0.217742] pnp 00:01: [mem 0x000e0000-0x000e3fff window] [ 0.217745] pnp 00:01: [mem 0x000e4000-0x000e7fff window] [ 0.217747] pnp 00:01: [mem 0x000e8000-0x000ebfff window] [ 0.217749] pnp 00:01: [mem 0x000ec000-0x000effff window] [ 0.217751] pnp 00:01: [mem 0xc0000000-0xfebfffff window] [ 0.217753] pnp 00:01: [mem 0xfed40000-0xfed4bfff window] [ 0.217798] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.217835] pnp 00:02: [io 0x0010-0x001f] [ 0.217837] pnp 00:02: [io 0x0090-0x009f] [ 0.217839] pnp 00:02: [io 0x0024-0x0025] [ 0.217841] pnp 00:02: [io 0x0028-0x0029] [ 0.217843] pnp 00:02: [io 0x002c-0x002d] [ 0.217845] pnp 00:02: [io 0x0030-0x0031] [ 0.217847] pnp 00:02: [io 0x0034-0x0035] [ 0.217849] pnp 00:02: [io 0x0038-0x0039] [ 0.217851] pnp 00:02: [io 0x003c-0x003d] [ 0.217853] pnp 00:02: [io 0x00a4-0x00a5] [ 0.217855] pnp 00:02: [io 0x00a8-0x00a9] [ 0.217857] pnp 00:02: [io 0x00ac-0x00ad] [ 0.217859] pnp 00:02: [io 0x00b0-0x00b5] [ 0.217861] pnp 00:02: [io 0x00b8-0x00b9] [ 0.217863] pnp 00:02: [io 0x00bc-0x00bd] [ 0.217865] pnp 00:02: [io 0x0050-0x0053] [ 0.217867] pnp 00:02: [io 0x0072-0x0077] [ 0.217869] pnp 00:02: [io 0x164e-0x164f] [ 0.217871] pnp 00:02: [io 0x002e-0x002f] [ 0.217873] pnp 00:02: [io 0x1000-0x107f] [ 0.217875] pnp 00:02: [io 0x1180-0x11bf] [ 0.217877] pnp 00:02: [io 0x0800-0x080f] [ 0.217879] pnp 00:02: [io 0x15e0-0x15ef] [ 0.217881] pnp 00:02: [io 0x1600-0x165f] [ 0.217883] pnp 00:02: [mem 0xf0000000-0xf3ffffff] [ 0.217885] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] [ 0.217887] pnp 00:02: [mem 0xfed14000-0xfed17fff] [ 0.217889] pnp 00:02: [mem 0xfed18000-0xfed18fff] [ 0.217891] pnp 00:02: [mem 0xfed19000-0xfed19fff] [ 0.217895] pnp 00:02: [mem 0xfed45000-0xfed4bfff] [ 0.217989] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.218081] system 00:02: [io 0x1000-0x107f] has been reserved [ 0.218161] system 00:02: [io 0x1180-0x11bf] has been reserved [ 0.218241] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.218320] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.218400] system 00:02: [io 0x1600-0x165f] could not be reserved [ 0.218481] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.218562] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.218645] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.218726] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.218807] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.218887] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.218969] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.219013] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.219040] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.219048] pnp 00:04: [io 0x0000-0x000f] [ 0.219051] pnp 00:04: [io 0x0080-0x008f] [ 0.219053] pnp 00:04: [io 0x00c0-0x00df] [ 0.219055] pnp 00:04: [dma 4] [ 0.219076] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.219083] pnp 00:05: [io 0x0061] [ 0.219106] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.219114] pnp 00:06: [io 0x00f0] [ 0.219123] pnp 00:06: [irq 13] [ 0.219145] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.219154] pnp 00:07: [io 0x0070-0x0071] [ 0.219160] pnp 00:07: [irq 8] [ 0.219182] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.219190] pnp 00:08: [io 0x0060] [ 0.219192] pnp 00:08: [io 0x0064] [ 0.219197] pnp 00:08: [irq 1] [ 0.219221] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.219233] pnp 00:09: [irq 12] [ 0.219255] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active) [ 0.219492] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (disabled) [ 0.219707] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (disabled) [ 0.219866] pnp 00:0c: [mem 0xfed40000-0xfed44fff] [ 0.219893] pnp 00:0c: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active) [ 0.220403] pnp: PnP ACPI: found 13 devices [ 0.220481] ACPI: ACPI bus type pnp unregistered [ 0.225192] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.225273] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.225358] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff] [ 0.225441] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref] [ 0.225557] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.225637] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.225721] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff] [ 0.225804] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref] [ 0.225919] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.225999] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.226092] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff] [ 0.226177] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref] [ 0.226292] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.226372] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.226456] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff] [ 0.226540] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref] [ 0.226656] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.226736] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 0.226821] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.226905] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref] [ 0.227031] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.227034] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.227037] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.227039] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.227043] pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref] [ 0.227154] pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff] [ 0.227236] pci 0000:15:00.0: BAR 13: assigned [io 0x7000-0x70ff] [ 0.227316] pci 0000:15:00.0: BAR 14: assigned [io 0x7400-0x74ff] [ 0.227397] pci 0000:15:00.0: CardBus bridge to [bus 16-17] [ 0.227476] pci 0000:15:00.0: bridge window [io 0x7000-0x70ff] [ 0.227560] pci 0000:15:00.0: bridge window [io 0x7400-0x74ff] [ 0.227644] pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref] [ 0.227756] pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff] [ 0.227841] pci 0000:00:1e.0: PCI bridge to [bus 15-18] [ 0.227921] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff] [ 0.228015] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff] [ 0.228099] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref] [ 0.228256] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 0.228340] pci 0000:00:1e.0: setting latency timer to 64 [ 0.228356] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.228358] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.228360] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.228363] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.228365] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.228367] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff] [ 0.228369] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff] [ 0.228372] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed4bfff] [ 0.228374] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.228376] pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff] [ 0.228378] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref] [ 0.228381] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.228383] pci_bus 0000:03: resource 1 [mem 0xdc000000-0xdf3fffff] [ 0.228385] pci_bus 0000:03: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref] [ 0.228388] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 0.228390] pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff] [ 0.228392] pci_bus 0000:04: resource 2 [mem 0xdfb00000-0xdfbfffff 64bit pref] [ 0.228394] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff] [ 0.228397] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd5ffffff] [ 0.228399] pci_bus 0000:05: resource 2 [mem 0xdf800000-0xdf8fffff 64bit pref] [ 0.228401] pci_bus 0000:0d: resource 0 [io 0x6000-0x6fff] [ 0.228403] pci_bus 0000:0d: resource 1 [mem 0xd0000000-0xd1ffffff] [ 0.228406] pci_bus 0000:0d: resource 2 [mem 0xdf500000-0xdf5fffff 64bit pref] [ 0.228408] pci_bus 0000:15: resource 0 [io 0x7000-0xafff] [ 0.228410] pci_bus 0000:15: resource 1 [mem 0xf8300000-0xfbffffff] [ 0.228412] pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref] [ 0.228414] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7] [ 0.228417] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff] [ 0.228419] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff] [ 0.228421] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.228423] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.228426] pci_bus 0000:15: resource 9 [mem 0x000dc000-0x000dffff] [ 0.228428] pci_bus 0000:15: resource 10 [mem 0xc0000000-0xfebfffff] [ 0.228430] pci_bus 0000:15: resource 11 [mem 0xfed40000-0xfed4bfff] [ 0.228432] pci_bus 0000:16: resource 0 [io 0x7000-0x70ff] [ 0.228434] pci_bus 0000:16: resource 1 [io 0x7400-0x74ff] [ 0.228437] pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref] [ 0.228439] pci_bus 0000:16: resource 3 [mem 0xc0000000-0xc3ffffff] [ 0.228466] NET: Registered protocol family 2 [ 0.228682] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.230593] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.231278] TCP: Hash tables configured (established 262144 bind 65536) [ 0.231431] TCP: reno registered [ 0.231509] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.231625] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.231846] NET: Registered protocol family 1 [ 0.231944] pci 0000:00:02.0: Boot video device [ 0.231982] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.231984] pci 0000:00:1a.0: Performing full reset [ 0.232026] pci 0000:00:1a.1: power state changed by ACPI to D0 [ 0.232113] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.232115] pci 0000:00:1a.1: Performing full reset [ 0.232211] pci 0000:00:1d.0: power state changed by ACPI to D0 [ 0.232298] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.232300] pci 0000:00:1d.0: Performing full reset [ 0.232338] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.232340] pci 0000:00:1d.1: Performing full reset [ 0.232361] pci 0000:00:1d.2: power state changed by ACPI to D0 [ 0.232450] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.232452] pci 0000:00:1d.2: Performing full reset [ 0.232529] PCI: CLS mismatch (64 != 32), using 64 bytes [ 0.232564] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.232645] software IO TLB [mem 0xbb6aa000-0xbf6a9fff] (64MB) mapped at [ffff8800bb6aa000-ffff8800bf6a9fff] [ 0.232804] Simple Boot Flag at 0x35 set to 0x1 [ 0.233179] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c [ 0.233265] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c [ 0.233377] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.233610] audit: initializing netlink socket (disabled) [ 0.233698] type=2000 audit(1351006811.232:1): initialized [ 0.234049] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.236447] msgmni has been set to 7755 [ 0.236930] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.237073] io scheduler noop registered [ 0.237150] io scheduler deadline registered [ 0.237252] io scheduler cfq registered (default) [ 0.237473] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.237637] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.237796] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.237954] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.238124] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 0.238261] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.238347] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.238368] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.238449] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.238533] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.238555] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 0.238639] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 0.238660] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.238744] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.238765] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 0.238849] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 0.238865] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.238994] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.239346] serial 00:0a: [io 0x03f8-0x03ff] [ 0.239432] serial 00:0a: [irq 4] [ 0.239696] serial 00:0a: activated [ 0.260483] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.280966] 0000:00:03.3: ttyS1 at I/O 0x1830 (irq = 17) is a 16550A [ 0.281242] Non-volatile memory driver v1.3 [ 0.281417] Linux agpgart interface v0.103 [ 0.281558] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 0.281717] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 0.282795] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.282993] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.284724] intel_idle: does not run on family 6 model 23 [ 0.285050] ACPI: AC Adapter [AC] (on-line) [ 0.285318] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.285569] ACPI: Lid Switch [LID] [ 0.285682] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.285794] ACPI: Sleep Button [SLPB] [ 0.285915] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.286035] ACPI: Power Button [PWRF] [ 0.286197] ACPI: Requesting acpi_cpufreq [ 0.287950] Monitor-Mwait will be used to enter C-1 state [ 0.287955] Monitor-Mwait will be used to enter C-2 state [ 0.287958] Monitor-Mwait will be used to enter C-3 state [ 0.287969] ACPI: acpi_idle registered with cpuidle [ 0.337436] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.337517] ACPI: Thermal Zone [THM0] (49 C) [ 0.338409] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.338489] ACPI: Thermal Zone [THM1] (38 C) [ 0.338606] GHES: HEST is not enabled! [ 0.338765] [drm] Initialized drm 1.1.0 20060810 [ 0.339262] i915 0000:00:02.0: setting latency timer to 64 [ 0.351163] ACPI: Battery Slot [BAT0] (battery present) [ 0.375130] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 0.375138] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.375218] [drm] Driver supports precise vblank timestamp query. [ 0.375331] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.799172] [drm] initialized overlay support [ 0.890397] fbcon: inteldrmfb (fb0) is primary device [ 1.158644] Console: switching to colour frame buffer device 160x50 [ 1.161283] fb0: inteldrmfb frame buffer device [ 1.161305] drm: registered panic notifier [ 1.163206] acpi device:02: registered as cooling_device2 [ 1.163274] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.163345] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.163421] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.163556] ahci 0000:00:1f.2: version 3.0 [ 1.163613] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 1.163669] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode [ 1.163716] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 1.163759] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.164056] scsi0 : ahci [ 1.164148] scsi1 : ahci [ 1.164228] scsi2 : ahci [ 1.164282] ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 46 [ 1.164322] ata2: DUMMY [ 1.164336] ata3: DUMMY [ 1.164412] ata_piix 0000:00:1f.1: version 2.13 [ 1.164451] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.164685] scsi3 : ata_piix [ 1.164896] scsi4 : ata_piix [ 1.164955] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14 [ 1.164990] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15 [ 1.165051] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k [ 1.165083] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 1.166320] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.166427] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.166501] ata5: port disabled--ignoring [ 1.167732] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 1.320509] ata4.00: ATAPI: MATSHITADVD-RAM UJ-822S, 1.61, max UDMA/33 [ 1.327395] ata4.00: configured for UDMA/33 [ 1.469029] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.471280] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.471284] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.472570] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.480988] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:21:86:52:b0:a9 [ 1.482258] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.483572] e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008FF-0FF [ 1.484864] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 1.486113] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 1.487421] iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 1.512794] ata1.00: ATA-8: ST9320423AS, 0002SDM1, max UDMA/133 [ 1.514048] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.517320] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.517323] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.518601] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.521545] ata1.00: configured for UDMA/133 [ 1.522902] scsi 0:0:0:0: Direct-Access ATA ST9320423AS 0002 PQ: 0 ANSI: 5 [ 1.524346] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.525731] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.527121] sd 0:0:0:0: [sda] Write Protect is off [ 1.527898] iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 1.527914] iwl4965 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 1.527994] iwl4965 0000:03:00.0: irq 48 for MSI/MSI-X [ 1.528155] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.528157] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 1.528188] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.528192] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.528226] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.528235] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4 [ 1.528239] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 1.528263] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.532153] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 1.532155] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 1.532170] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 [ 1.532175] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 1.536814] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.536823] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-822S 1.61 PQ: 0 ANSI: 5 [ 1.536833] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.539572] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.540954] usb usb1: default language 0x0409 [ 1.540961] usb usb1: udev 1, busnum 1, minor = 0 [ 1.540963] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.542332] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.543707] sda: sda1 sda2 sda3 [ 1.543714] usb usb1: Product: EHCI Host Controller [ 1.543716] usb usb1: Manufacturer: Linux 3.6.2-gentoo ehci_hcd [ 1.543717] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.543795] usb usb1: usb_probe_device [ 1.543798] usb usb1: configuration #1 chosen from 1 choice [ 1.543805] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.543829] hub 1-0:1.0: usb_probe_interface [ 1.543830] hub 1-0:1.0: usb_probe_interface - got id [ 1.543833] hub 1-0:1.0: USB hub found [ 1.543837] hub 1-0:1.0: 4 ports detected [ 1.543838] hub 1-0:1.0: standalone hub [ 1.543840] hub 1-0:1.0: no power switching (usb 1.0) [ 1.543841] hub 1-0:1.0: individual port over-current protection [ 1.543843] hub 1-0:1.0: power on to power good time: 20ms [ 1.543846] hub 1-0:1.0: local power source is good [ 1.543847] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.543932] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.543936] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.543968] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.543976] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 1.543980] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 1.544015] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.547897] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.547905] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.547907] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 1.547924] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 [ 1.547929] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 1.549336] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.549338] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.549419] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.549546] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 1.525714] ACPI: Invalid Power Resource to register! [ 1.549688] ACPI: Invalid Power Resource to register! [ 1.554023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.554039] usb usb2: default language 0x0409 [ 1.554044] usb usb2: udev 1, busnum 2, minor = 128 [ 1.554046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.554048] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.554049] usb usb2: Product: EHCI Host Controller [ 1.554051] usb usb2: Manufacturer: Linux 3.6.2-gentoo ehci_hcd [ 1.554052] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.554122] usb usb2: usb_probe_device [ 1.554124] usb usb2: configuration #1 chosen from 1 choice [ 1.554129] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.554148] hub 2-0:1.0: usb_probe_interface [ 1.554150] hub 2-0:1.0: usb_probe_interface - got id [ 1.554151] hub 2-0:1.0: USB hub found [ 1.554155] hub 2-0:1.0: 6 ports detected [ 1.554156] hub 2-0:1.0: standalone hub [ 1.554157] hub 2-0:1.0: no power switching (usb 1.0) [ 1.554159] hub 2-0:1.0: individual port over-current protection [ 1.554160] hub 2-0:1.0: power on to power good time: 20ms [ 1.554163] hub 2-0:1.0: local power source is good [ 1.554164] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.554241] uhci_hcd: USB Universal Host Controller Interface driver [ 1.554269] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.554272] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.554311] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.554318] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.554323] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.554324] uhci_hcd 0000:00:1a.0: Performing full reset [ 1.554340] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 1.554355] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 1.554392] usb usb3: default language 0x0409 [ 1.554397] usb usb3: udev 1, busnum 3, minor = 256 [ 1.554399] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.554401] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.554402] usb usb3: Product: UHCI Host Controller [ 1.554404] usb usb3: Manufacturer: Linux 3.6.2-gentoo uhci_hcd [ 1.554405] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.554461] usb usb3: usb_probe_device [ 1.554463] usb usb3: configuration #1 chosen from 1 choice [ 1.554469] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.554484] hub 3-0:1.0: usb_probe_interface [ 1.554485] hub 3-0:1.0: usb_probe_interface - got id [ 1.554487] hub 3-0:1.0: USB hub found [ 1.554491] hub 3-0:1.0: 2 ports detected [ 1.554492] hub 3-0:1.0: standalone hub [ 1.554494] hub 3-0:1.0: no power switching (usb 1.0) [ 1.554495] hub 3-0:1.0: individual port over-current protection [ 1.554496] hub 3-0:1.0: power on to power good time: 2ms [ 1.554499] hub 3-0:1.0: local power source is good [ 1.554501] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.554544] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 1.554568] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.554571] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.554606] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.554614] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.554618] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.554620] uhci_hcd 0000:00:1a.1: Performing full reset [ 1.554636] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 1.554649] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 1.554690] usb usb4: default language 0x0409 [ 1.554695] usb usb4: udev 1, busnum 4, minor = 384 [ 1.554697] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.554698] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.554700] usb usb4: Product: UHCI Host Controller [ 1.554701] usb usb4: Manufacturer: Linux 3.6.2-gentoo uhci_hcd [ 1.554703] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.554767] usb usb4: usb_probe_device [ 1.554769] usb usb4: configuration #1 chosen from 1 choice [ 1.554777] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.554795] hub 4-0:1.0: usb_probe_interface [ 1.554796] hub 4-0:1.0: usb_probe_interface - got id [ 1.554798] hub 4-0:1.0: USB hub found [ 1.554801] hub 4-0:1.0: 2 ports detected [ 1.554802] hub 4-0:1.0: standalone hub [ 1.554803] hub 4-0:1.0: no power switching (usb 1.0) [ 1.554804] hub 4-0:1.0: individual port over-current protection [ 1.554806] hub 4-0:1.0: power on to power good time: 2ms [ 1.554809] hub 4-0:1.0: local power source is good [ 1.554810] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.554854] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 1.554879] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.554882] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.554912] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.554919] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.554924] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.554925] uhci_hcd 0000:00:1d.0: Performing full reset [ 1.554941] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 1.554954] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 [ 1.554988] usb usb5: default language 0x0409 [ 1.554993] usb usb5: udev 1, busnum 5, minor = 512 [ 1.554995] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.554997] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.554998] usb usb5: Product: UHCI Host Controller [ 1.555012] usb usb5: Manufacturer: Linux 3.6.2-gentoo uhci_hcd [ 1.555014] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.555070] usb usb5: usb_probe_device [ 1.555072] usb usb5: configuration #1 chosen from 1 choice [ 1.555077] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.555093] hub 5-0:1.0: usb_probe_interface [ 1.555094] hub 5-0:1.0: usb_probe_interface - got id [ 1.555095] hub 5-0:1.0: USB hub found [ 1.555098] hub 5-0:1.0: 2 ports detected [ 1.555100] hub 5-0:1.0: standalone hub [ 1.555101] hub 5-0:1.0: no power switching (usb 1.0) [ 1.555102] hub 5-0:1.0: individual port over-current protection [ 1.555103] hub 5-0:1.0: power on to power good time: 2ms [ 1.555106] hub 5-0:1.0: local power source is good [ 1.555108] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.555157] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 1.555177] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.555180] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.555211] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.555219] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.555224] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.555225] uhci_hcd 0000:00:1d.1: Performing full reset [ 1.555240] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 1.555255] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 [ 1.555288] usb usb6: default language 0x0409 [ 1.555293] usb usb6: udev 1, busnum 6, minor = 640 [ 1.555295] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.555297] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.555298] usb usb6: Product: UHCI Host Controller [ 1.555300] usb usb6: Manufacturer: Linux 3.6.2-gentoo uhci_hcd [ 1.555301] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.555367] usb usb6: usb_probe_device [ 1.555369] usb usb6: configuration #1 chosen from 1 choice [ 1.555374] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.555391] hub 6-0:1.0: usb_probe_interface [ 1.555393] hub 6-0:1.0: usb_probe_interface - got id [ 1.555394] hub 6-0:1.0: USB hub found [ 1.555398] hub 6-0:1.0: 2 ports detected [ 1.555399] hub 6-0:1.0: standalone hub [ 1.555400] hub 6-0:1.0: no power switching (usb 1.0) [ 1.555401] hub 6-0:1.0: individual port over-current protection [ 1.555403] hub 6-0:1.0: power on to power good time: 2ms [ 1.555406] hub 6-0:1.0: local power source is good [ 1.555407] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.555454] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 1.555474] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.555477] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.555507] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.555515] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.555519] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.555521] uhci_hcd 0000:00:1d.2: Performing full reset [ 1.555537] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 1.555550] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 [ 1.555585] usb usb7: default language 0x0409 [ 1.555590] usb usb7: udev 1, busnum 7, minor = 768 [ 1.555592] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.555594] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.555595] usb usb7: Product: UHCI Host Controller [ 1.555597] usb usb7: Manufacturer: Linux 3.6.2-gentoo uhci_hcd [ 1.555598] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.555662] usb usb7: usb_probe_device [ 1.555664] usb usb7: configuration #1 chosen from 1 choice [ 1.555670] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 1.555686] hub 7-0:1.0: usb_probe_interface [ 1.555687] hub 7-0:1.0: usb_probe_interface - got id [ 1.555689] hub 7-0:1.0: USB hub found [ 1.555692] hub 7-0:1.0: 2 ports detected [ 1.555693] hub 7-0:1.0: standalone hub [ 1.555694] hub 7-0:1.0: no power switching (usb 1.0) [ 1.555695] hub 7-0:1.0: individual port over-current protection [ 1.555697] hub 7-0:1.0: power on to power good time: 2ms [ 1.555700] hub 7-0:1.0: local power source is good [ 1.555701] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 1.555748] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 1.555765] Initializing USB Mass Storage driver... [ 1.555801] usbcore: registered new interface driver usb-storage [ 1.555801] USB Mass Storage support registered. [ 1.555834] usbcore: registered new interface driver libusual [ 1.555875] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.563382] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.563407] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.563458] mousedev: PS/2 mouse device common for all mice [ 1.563638] rtc_cmos 00:07: RTC can wake from S4 [ 1.563790] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.563825] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.563876] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 1.563949] cpuidle: using governor ladder [ 1.646431] cpuidle: using governor menu [ 1.646686] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.648544] sdhci: Secure Digital Host Controller Interface driver [ 1.648551] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.648554] hub 1-0:1.0: port 1: status 0501 change 0001 [ 1.648563] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.648565] hub 1-0:1.0: port 2: status 0501 change 0001 [ 1.648576] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.648578] hub 1-0:1.0: port 4: status 0501 change 0001 [ 1.649606] sdhci: Copyright(c) Pierre Ossman [ 1.650695] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) [ 1.651810] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.652886] sdhci-pci 0000:15:00.2: setting latency timer to 64 [ 1.652896] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.653897] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.653919] Registered led device: mmc0:: [ 1.655156] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.655232] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 [ 1.655241] uhci_hcd 0000:00:1a.0: port 2 portsc 0082,00 [ 1.655254] uhci_hcd 0000:00:1a.1: port 2 portsc 0082,00 [ 1.655300] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.655304] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.655308] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.675062] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA [ 1.676242] sdhci-pci 0000:15:00.3: SDHCI controller found [1180:0843] (rev 11) [ 1.677446] sdhci-pci 0000:15:00.3: setting latency timer to 64 [ 1.677467] Registered led device: mmc1:: [ 1.701366] mmc1: SDHCI controller on PCI [0000:15:00.3] using DMA [ 1.702568] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.703876] usbcore: registered new interface driver usbhid [ 1.705118] usbhid: USB HID core driver [ 1.706655] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 1.707843] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 1.708447] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.710586] thinkpad_acpi: ThinkPad BIOS 7LETC5WW (2.25 ), EC 7KHT24WW-1.08 [ 1.711801] thinkpad_acpi: Lenovo ThinkPad T61, model 64669YG [ 1.713286] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 1.715203] thinkpad_acpi: ACPI backlight control delay disabled [ 1.716615] thinkpad_acpi: radio switch found; radios are enabled [ 1.717882] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 1.719146] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 1.722668] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 1.724530] Registered led device: tpacpi::thinklight [ 1.724551] Registered led device: tpacpi::power [ 1.724561] Registered led device: tpacpi::standby [ 1.724574] Registered led device: tpacpi::thinkvantage [ 1.727062] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 1.728689] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 1.730887] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 [ 1.734363] hdaps: inverting axis (3) readings [ 1.735801] hdaps: LENOVO ThinkPad T61 detected [ 1.738264] input: hdaps as /devices/platform/hdaps/input/input6 [ 1.739791] hdaps: driver successfully loaded [ 1.741307] hda_intel: probe_mask set to 0x1 for device 17aa:20ac [ 1.743286] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X [ 1.748044] hub 1-0:1.0: state 7 ports 4 chg 0016 evt 0000 [ 1.748051] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.764769] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.799328] ehci_hcd 0000:00:1a.7: port 1 full speed --> companion [ 1.799333] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 1.799336] hub 1-0:1.0: port 1 not reset yet, waiting 50ms [ 1.823317] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.850125] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.850147] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 1.881264] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.901328] ehci_hcd 0000:00:1a.7: port 2 full speed --> companion [ 1.901333] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 1.901336] hub 1-0:1.0: port 2 not reset yet, waiting 50ms [ 1.952081] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.952102] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 2.003328] ehci_hcd 0000:00:1a.7: port 4 reset complete, port enabled [ 2.003332] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.054078] usb 1-4: new high-speed USB device number 4 using ehci_hcd [ 2.106329] ehci_hcd 0000:00:1a.7: port 4 reset complete, port enabled [ 2.106333] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.126715] usbcore: registered new interface driver snd-usb-audio [ 2.128182] Netfilter messages via NETLINK v0.30. [ 2.129586] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.131098] ctnetlink v0.93: registering with nfnetlink. [ 2.132694] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.134124] TCP: cubic registered [ 2.135504] Initializing XFRM netlink socket [ 2.136963] NET: Registered protocol family 10 [ 2.138485] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.140040] sit: IPv6 over IPv4 tunneling driver [ 2.141567] NET: Registered protocol family 17 [ 2.143098] Bluetooth: RFCOMM socket layer initialized [ 2.144505] Bluetooth: RFCOMM ver 1.11 [ 2.145888] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.147225] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.156772] registered taskstats version 1 [ 2.158657] console [netcon0] enabled [ 2.159964] netconsole: network logging started [ 2.163296] ALSA device list: [ 2.164596] #0: HDA Intel at 0xfe020000 irq 49 [ 2.167426] #29: ThinkPad Console Audio Control at EC reg 0x30, fw 7KHT24WW-1.08 [ 2.170753] usb 1-4: udev 4, busnum 1, minor = 3 [ 2.170762] usb 1-4: New USB device found, idVendor=04b3, idProduct=4486 [ 2.173686] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.176799] usb 1-4: usb_probe_device [ 2.176803] usb 1-4: configuration #1 chosen from 1 choice [ 2.176862] usb 1-4: adding 1-4:1.0 (config #1, interface 0) [ 2.176886] hub 1-4:1.0: usb_probe_interface [ 2.176888] hub 1-4:1.0: usb_probe_interface - got id [ 2.176891] hub 1-4:1.0: USB hub found [ 2.178233] hub 1-4:1.0: 7 ports detected [ 2.179489] hub 1-4:1.0: standalone hub [ 2.179491] hub 1-4:1.0: individual port power switching [ 2.179493] hub 1-4:1.0: individual port over-current protection [ 2.179622] hub 1-4:1.0: TT per port [ 2.179624] hub 1-4:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.179626] hub 1-4:1.0: power on to power good time: 100ms [ 2.179863] hub 1-4:1.0: local power source is good [ 2.179866] hub 1-4:1.0: enabling power on all ports [ 2.180746] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0006 [ 2.180764] uhci_hcd 0000:00:1a.0: port 1 portsc 0093,00 [ 2.180770] hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 2.280872] hub 1-4:1.0: port 6: status 0101 change 0001 [ 2.284115] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 2.381086] usb 1-4: link qh256-0001/ffff88013670ae00 start 1 [1/0 us] [ 2.386123] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 2.417424] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000/0x0, board id: 71, fw id: 496542 [ 2.420405] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.463601] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 2.484056] EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities [ 2.488076] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities [ 2.506400] EXT4-fs (sda3): INFO: recovery required on readonly filesystem [ 2.509366] EXT4-fs (sda3): write access will be enabled during recovery [ 2.529450] usb 3-1: skipped 1 descriptor after interface [ 2.532437] usb 3-1: default language 0x0409 [ 2.542415] usb 3-1: udev 2, busnum 3, minor = 257 [ 2.542421] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110 [ 2.543758] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.545017] usb 3-1: Product: BCM2045B [ 2.546253] usb 3-1: Manufacturer: Broadcom Corp [ 2.547652] usb 3-1: usb_probe_device [ 2.547660] usb 3-1: configuration #1 chosen from 1 choice [ 2.550432] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 2.550525] usb 3-1: adding 3-1:1.1 (config #1, interface 1) [ 2.550765] usb 3-1: adding 3-1:1.2 (config #1, interface 2) [ 2.550804] usb 3-1: adding 3-1:1.3 (config #1, interface 3) [ 2.550852] uhci_hcd 0000:00:1a.0: port 2 portsc 0093,00 [ 2.550859] hub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 2.654076] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 2.704052] usb usb5: suspend_rh (auto-stop) [ 2.704074] usb usb6: suspend_rh (auto-stop) [ 2.704096] usb usb7: suspend_rh (auto-stop) [ 2.756086] usb 3-2: new full-speed USB device number 3 using uhci_hcd [ 2.879063] usb 3-2: ep0 maxpacket = 8 [ 2.900423] usb 3-2: default language 0x0409 [ 2.919428] usb 3-2: udev 3, busnum 3, minor = 258 [ 2.919434] usb 3-2: New USB device found, idVendor=0483, idProduct=2016 [ 2.920724] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.921996] usb 3-2: Product: Biometric Coprocessor [ 2.923255] usb 3-2: Manufacturer: STMicroelectronics [ 2.924597] usb 3-2: usb_probe_device [ 2.924605] usb 3-2: configuration #1 chosen from 1 choice [ 2.927424] usb 3-2: adding 3-2:1.0 (config #1, interface 0) [ 2.927543] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.927559] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0006 [ 2.927571] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 2.927581] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s [ 2.954080] usb usb4: suspend_rh (auto-stop) [ 3.031045] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [ 3.031057] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 3.031067] hub 1-0:1.0: port 2, status 0100, change 0001, 12 Mb/s [ 3.135048] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 [ 3.135059] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.135069] hub 1-4:1.0: state 7 ports 7 chg 0040 evt 0000 [ 3.135252] hub 1-4:1.0: port 6, status 0101, change 0000, 12 Mb/s [ 3.146110] hub 1-4:1.0: port 6 not reset yet, waiting 10ms [ 3.208241] usb 1-4.6: new high-speed USB device number 5 using ehci_hcd [ 3.222365] hub 1-4:1.0: port 6 not reset yet, waiting 10ms [ 3.297106] usb 1-4.6: default language 0x0409 [ 3.297480] usb 1-4.6: udev 5, busnum 1, minor = 4 [ 3.297483] usb 1-4.6: New USB device found, idVendor=05e3, idProduct=0608 [ 3.298759] usb 1-4.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.300019] usb 1-4.6: Product: USB2.0 Hub [ 3.301431] usb 1-4.6: usb_probe_device [ 3.301434] usb 1-4.6: configuration #1 chosen from 1 choice [ 3.301736] usb 1-4.6: adding 1-4.6:1.0 (config #1, interface 0) [ 3.301754] hub 1-4.6:1.0: usb_probe_interface [ 3.301756] hub 1-4.6:1.0: usb_probe_interface - got id [ 3.301759] hub 1-4.6:1.0: USB hub found [ 3.303357] hub 1-4.6:1.0: 4 ports detected [ 3.304714] hub 1-4.6:1.0: standalone hub [ 3.304717] hub 1-4.6:1.0: ganged power switching [ 3.304719] hub 1-4.6:1.0: global over-current protection [ 3.304721] hub 1-4.6:1.0: Single TT [ 3.304723] hub 1-4.6:1.0: TT requires at most 32 FS bit times (2664 ns) [ 3.304725] hub 1-4.6:1.0: Port indicators are supported [ 3.304727] hub 1-4.6:1.0: power on to power good time: 100ms [ 3.305118] hub 1-4.6:1.0: local power source is good [ 3.305121] hub 1-4.6:1.0: no over-current condition exists [ 3.305123] hub 1-4.6:1.0: enabling power on all ports [ 3.406352] hub 1-4.6:1.0: port 1: status 0301 change 0001 [ 3.407371] hub 1-4.6:1.0: port 4: status 0301 change 0001 [ 3.507067] usb 1-4.6: link qh256-0001/ffff880136047d80 start 2 [1/0 us] [ 3.507099] hub 1-4.6:1.0: state 7 ports 4 chg 0012 evt 0000 [ 3.507365] hub 1-4.6:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 3.570377] usb 1-4.6.1: new low-speed USB device number 6 using ehci_hcd [ 3.650868] usb 1-4.6.1: skipped 1 descriptor after interface [ 3.650871] usb 1-4.6.1: udev 6, busnum 1, minor = 5 [ 3.650874] usb 1-4.6.1: New USB device found, idVendor=04b3, idProduct=3107 [ 3.652129] usb 1-4.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.653419] usb 1-4.6.1: usb_probe_device [ 3.653422] usb 1-4.6.1: configuration #1 chosen from 1 choice [ 3.653874] usb 1-4.6.1: adding 1-4.6.1:1.0 (config #1, interface 0) [ 3.653902] usbhid 1-4.6.1:1.0: usb_probe_interface [ 3.653905] usbhid 1-4.6.1:1.0: usb_probe_interface - got id [ 3.656323] input: HID 04b3:3107 as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.6/1-4.6.1/1-4.6.1:1.0/input/input8 [ 3.657776] hid-generic 0003:04B3:3107.0001: input,hidraw0: USB HID v11.10 Mouse [HID 04b3:3107] on usb-0000:00:1a.7-4.6.1/input0 [ 3.659491] hub 1-4.6:1.0: port 4, status 0301, change 0000, 1.5 Mb/s [ 3.712075] hub 2-0:1.0: hub_suspend [ 3.712080] usb usb2: bus auto-suspend, wakeup 1 [ 3.712083] ehci_hcd 0000:00:1d.7: suspend root hub [ 3.712111] hub 5-0:1.0: hub_suspend [ 3.712114] usb usb5: bus auto-suspend, wakeup 1 [ 3.712117] usb usb5: suspend_rh [ 3.712136] hub 6-0:1.0: hub_suspend [ 3.712140] usb usb6: bus auto-suspend, wakeup 1 [ 3.712142] usb usb6: suspend_rh [ 3.712161] hub 7-0:1.0: hub_suspend [ 3.712164] usb usb7: bus auto-suspend, wakeup 1 [ 3.712167] usb usb7: suspend_rh [ 3.722365] usb 1-4.6.4: new low-speed USB device number 7 using ehci_hcd [ 3.811130] usb 1-4.6.4: skipped 1 descriptor after interface [ 3.811138] usb 1-4.6.4: skipped 1 descriptor after interface [ 3.812114] usb 1-4.6.4: default language 0x0409 [ 3.816125] usb 1-4.6.4: udev 7, busnum 1, minor = 6 [ 3.816133] usb 1-4.6.4: New USB device found, idVendor=04d9, idProduct=2013 [ 3.819120] usb 1-4.6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.822096] usb 1-4.6.4: Product: USB Keyboard [ 3.825097] usb 1-4.6.4: Manufacturer: [ 3.826573] usb 1-4.6.4: usb_probe_device [ 3.826576] usb 1-4.6.4: configuration #1 chosen from 1 choice [ 3.827373] usb 1-4.6.4: adding 1-4.6.4:1.0 (config #1, interface 0) [ 3.827415] usbhid 1-4.6.4:1.0: usb_probe_interface [ 3.827419] usbhid 1-4.6.4:1.0: usb_probe_interface - got id [ 3.835369] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.6/1-4.6.4/1-4.6.4:1.0/input/input9 [ 3.836771] usb 1-4.6.4: link qh16-0e01/ffff8801367ede80 start 3 [1/2 us] [ 3.836878] hid-generic 0003:04D9:2013.0002: input,hidraw1: USB HID v1.00 Keyboard [ USB Keyboard] on usb-0000:00:1a.7-4.6.4/input0 [ 3.838308] usb 1-4.6.4: adding 1-4.6.4:1.1 (config #1, interface 1) [ 3.838333] usbhid 1-4.6.4:1.1: usb_probe_interface [ 3.838335] usbhid 1-4.6.4:1.1: usb_probe_interface - got id [ 3.850704] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.6/1-4.6.4/1-4.6.4:1.1/input/input10 [ 3.852154] usb 1-4.6.4: link qh16-0e01/ffff8801367e0b00 start 4 [1/2 us] [ 3.852273] hid-generic 0003:04D9:2013.0003: input,hidraw2: USB HID v1.00 Device [ USB Keyboard] on usb-0000:00:1a.7-4.6.4/input1 [ 4.927086] hub 4-0:1.0: hub_suspend [ 4.927106] usb usb4: bus auto-suspend, wakeup 1 [ 4.927114] usb usb4: suspend_rh [ 7.548081] EXT4-fs (sda3): orphan cleanup on readonly fs [ 7.549667] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14815092 [ 7.549730] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 9044920 [ 7.549747] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 9044916 [ 7.549779] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14559125 [ 7.549795] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 12982576 [ 7.549811] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14559122 [ 7.549825] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14559121 [ 7.549839] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14559120 [ 7.549853] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14559119 [ 7.549867] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14559118 [ 7.549880] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14559114 [ 7.549893] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14559112 [ 7.549907] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14559111 [ 7.549920] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14559110 [ 7.549933] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14559107 [ 7.549952] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14559106 [ 7.549966] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14559105 [ 7.549979] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14559097 [ 7.549993] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14556537 [ 7.550019] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14556085 [ 7.550034] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14551078 [ 7.550048] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 9044428 [ 7.550086] EXT4-fs (sda3): 22 orphan inodes deleted [ 7.551551] EXT4-fs (sda3): recovery complete [ 7.787967] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 7.936431] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 7.937917] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. [ 7.941588] Freeing unused kernel memory: 512k freed [ 8.009783] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11 [ 10.192551] systemd[1]: systemd 194 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX +IMA -SYSVINIT -LIBCRYPTSETUP -GCRYPT -ACL +XZ; gentoo) [ 10.300427] systemd[1]: Set hostname to . [ 12.045974] systemd[1]: Cannot add dependency job for unit acpid.service, ignoring: Unit acpid.service failed to load: No such file or directory. See system logs and 'systemctl status acpid.service' for details. [ 12.049047] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details. [ 12.052272] systemd[1]: Cannot add dependency job for unit gdm.service, ignoring: Unit gdm.service failed to load: No such file or directory. See system logs and 'systemctl status gdm.service' for details. [ 12.055792] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 12.057583] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 12.059314] systemd[1]: Starting Remote File Systems. [ 12.062862] systemd[1]: Reached target Remote File Systems. [ 12.064616] systemd[1]: Starting Delayed Shutdown Socket. [ 12.068125] systemd[1]: Listening on Delayed Shutdown Socket. [ 12.069852] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 12.073397] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 12.075205] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 12.078913] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 12.080794] systemd[1]: Starting udev Kernel Socket. [ 12.084440] systemd[1]: Listening on udev Kernel Socket. [ 12.086230] systemd[1]: Starting udev Control Socket. [ 12.089819] systemd[1]: Listening on udev Control Socket. [ 12.091616] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 12.093432] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 12.095221] systemd[1]: Expecting device dev-sda2.device... [ 12.098734] systemd[1]: Starting Journal Socket. [ 12.102174] systemd[1]: Listening on Journal Socket. [ 12.103859] systemd[1]: Starting File System Check on Root Device... [ 12.116215] systemd[1]: Starting Setup Virtual Console... [ 12.362866] systemd[1]: Started Set Up Additional Binary Formats. [ 12.366853] systemd[1]: Starting udev Coldplug all Devices... [ 12.440606] systemd[1]: Starting Load Kernel Modules... [ 12.448340] systemd[1]: Mounting Huge Pages File System... [ 12.454277] systemd[1]: Starting udev Kernel Device Manager... [ 12.882838] systemd[1]: Starting Apply Kernel Variables... [ 12.892298] systemd[1]: Mounting POSIX Message Queue File System... [ 12.901162] systemd[1]: Starting Journal Service... [ 12.909733] systemd[1]: Started Journal Service. [ 13.313151] systemd-udevd[72]: starting version 194 [ 14.686521] fuse init (API version 7.20) [ 15.024816] vboxdrv: Found 2 processor cores. [ 15.025037] vboxdrv: fAsync=1 offMin=0x106b33 offMax=0x106b33 [ 15.026332] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 15.027505] vboxdrv: Successfully loaded version 4.2.0 (interface 0x001a0004). [ 16.655475] iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24 [ 16.656887] Registered led device: phy0-led [ 16.656969] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs' [ 21.277129] Adding 8393956k swap on /dev/sda2. Priority:-1 extents:1 across:8393956k [ 67.084651] EXT4-fs (sda3): re-mounted. Opts: user_xattr [ 67.355000] systemd-journald[75]: Received SIGUSR1 [ 73.712160] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 73.813100] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 73.813218] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 74.613320] usb 1-4.6.1: link qh8-0e01/ffff8801366d7480 start 5 [1/2 us] [ 75.103928] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 75.103936] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 75.103970] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 82.409029] EXT4-fs (sda3): re-mounted. Opts: user_xattr,commit=0