busybox dmesg output

busybox.dmesg (text/plain), 20.37 KB, created by brent on 2012-10-22 18:26:37 UTC

pci 0000:00:1c.7:   bridge window [mem 0xf6800000-0xf68fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0xcf200000-0xfeafffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf60fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xebffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xcf300000-0xcf4fffff]
pci_bus 0000:02: resource 2 [mem 0xcf500000-0xcf6fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf6a00000-0xf6afffff]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf6900000-0xf69fffff]
pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xf6800000-0xf68fffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 8, 1572864 bytes)
UDP-Lite hash table entries: 16384 (order: 8, 1572864 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28444k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb73f1000-0xbb3f0fff] (64MB) mapped at [ffff8800b73f1000-ffff8800bb3f0fff]
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x12
microcode: Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
sha1_ssse3: Using AVX optimized SHA-1 implementation
audit: initializing netlink socket (disabled)
type=2000 audit(1350914101.361:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ROMFS MTD (C) 2007 Red Hat, Inc.
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
msgmni has been set to 32768
NET: Registered protocol family 38
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Non-volatile memory driver v1.3
smapi::smapi_init, ERROR invalid usSmapiID
mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
mwave: mwavedd::mwave_init: Error: Failed to initialize board data
mwave: mwavedd::mwave_init: Error: Failed to initialize
Linux agpgart interface v0.103
nvidiafb: Device ID: 10de1200 
nvidiafb: HW is currently programmed for CRT
nvidiafb: Using CRT on CRTC 0
nvidiafb: cannot ioremap FB base
efifb: probing for efifb
efifb: framebuffer at 0xe9000000, mapped to 0xffffc9000f580000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
checking generic (e9000000 300000) vs hw (a0000 10000)
fb1: VGA16 VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
nbd: registered device at major 43
mtip32xx Version 1.2.6os3
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 41 for MSI/MSI-X
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
mei 0000:00:16.0: wd: failed to find the client
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Loading iSCSI transport class v2.0-870.
fnic: Cisco FCoE HBA Driver, ver 1.5.0.2
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.12 (Jun 04, 2012)
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.2-0[29800]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
scsi: <fdomain> Detection failed (no card)
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.04.00.03-k.
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.32
Copyright(c) 2004-2009 Emulex.  All rights reserved.
Brocade BFA FC/FCOE SCSI driver - version: 3.0.23.0
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.06.15-rc1 Mon. Mar. 19 17:00:00 PDT 2012
mpt2sas version 13.100.00.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
ipr: IBM Power RAID SCSI Device Driver version: 2.5.3 (March 10, 2012)
RocketRAID 3xxx/4xxx Controller driver v1.6 (091225)
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
VMware PVSCSI driver - version 1.0.2.0-k
st: Version 20101219, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
SCSI Media Changer driver v0.25 
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf6b36000 port 0xf6b36100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf6b36000 port 0xf6b36180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xf6b36000 port 0xf6b36200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xf6b36000 port 0xf6b36280 irq 42
ata5: SATA max UDMA/133 abar m2048@0xf6b36000 port 0xf6b36300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xf6b36000 port 0xf6b36380 irq 42
ahci 0000:04:00.0: irq 43 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xf6900000 port 0xf6900100 irq 43
ata8: SATA max UDMA/133 abar m512@0xf6900000 port 0xf6900180 irq 43
ahci 0000:05:00.0: irq 44 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:05:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xf6800000 port 0xf6800100 irq 44
ata10: SATA max UDMA/133 abar m512@0xf6800000 port 0xf6800180 irq 44
libphy: Fixed MDIO Bus: probed
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf6b38000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.6.2-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf6b37000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.6.2-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver appledisplay
usbcore: registered new interface driver cypress_cy7c63
usbcore: registered new interface driver iowarrior
usbcore: registered new interface driver ldusb
usbcore: registered new interface driver yurex
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
usbcore: registered new interface driver synaptics_usb
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
rtc-test rtc-test.0: rtc core: registered test as rtc1
rtc-test rtc-test.1: rtc core: registered test as rtc2
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88082bd06a38), AE_NOT_FOUND (20120711/psparse-536)
ata1.00: ATA-8: ST3000DM001-9YN166, CC4B, max UDMA/133
ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88082bd06a38), AE_NOT_FOUND (20120711/psparse-536)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST3000DM001-9YN1 CC4B PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ACPI: Invalid Power Resource to register!
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88082bd069c0), AE_NOT_FOUND (20120711/psparse-536)
ata2.00: ATA-8: ST3000DM001-9YN166, CC4B, max UDMA/133
ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88082bd069c0), AE_NOT_FOUND (20120711/psparse-536)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      ST3000DM001-9YN1 CC4B PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
ata7: SATA link down (SStatus 0 SControl 300)
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
ata9: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high-speed USB device number 2 using ehci_hcd
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [e-mail]
device-mapper: multipath: version 1.5.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath queue-length: version 0.1.0 loaded
device-mapper: multipath service-time: version 0.2.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
No iBFT detected.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
tsc: Refined TSC clocksource calibration: 3510.307 MHz
Switching to clocksource tsc
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:06: setting system clock to 2012-10-22 13:55:03 UTC (1350914103)
ata8: SATA link down (SStatus 0 SControl 300)
usb 2-1: new high-speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.3: new high-speed USB device number 3 using ehci_hcd
ata10: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 788k freed
usb 1-1.3: New USB device found, idVendor=154b, idProduct=005a
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: USB 2.0 FD
usb 1-1.3: Manufacturer: PNY Technologies
usb 1-1.3: SerialNumber: AA00000000007499
scsi10 : usb-storage 1-1.3:1.0
usb 1-1.5: new low-speed USB device number 4 using ehci_hcd
usb 1-1.5: New USB device found, idVendor=040b, idProduct=2000
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: USB Keyboard
usb 1-1.5: Manufacturer: Generic
input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input2
hid-generic 0003:040B:2000.0001: input,hidraw0: USB HID v1.10 Keyboard [Generic USB Keyboard] on usb-0000:00:1a.0-1.5/input0
input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input3
hid-generic 0003:040B:2000.0002: input,hidraw1: USB HID v1.10 Mouse [Generic USB Keyboard] on usb-0000:00:1a.0-1.5/input1
usb 1-1.6: new high-speed USB device number 5 using ehci_hcd
usb 1-1.6: New USB device found, idVendor=0bda, idProduct=8187
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: RTL8187_Wireless
usb 1-1.6: Manufacturer: Manufacturer_Realtek_RTL8187_
usb 1-1.6: SerialNumber: E84E0606E0A9
scsi 10:0:0:0: Direct-Access     PNY      USB 2.0 FD       1100 PQ: 0 ANSI: 4
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:0: [sdc] 7913472 512-byte logical blocks: (4.05 GB/3.77 GiB)
sd 10:0:0:0: [sdc] Write Protect is off
sd 10:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 10:0:0:0: [sdc] No Caching mode page present
sd 10:0:0:0: [sdc] Assuming drive cache: write through
sd 10:0:0:0: [sdc] No Caching mode page present
sd 10:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 10:0:0:0: [sdc] No Caching mode page present
sd 10:0:0:0: [sdc] Assuming drive cache: write through
sd 10:0:0:0: [sdc] Attached SCSI removable disk
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
bio: create slab <bio-1> at 1
md/raid1:md0: active with 2 out of 2 mirrors
created bitmap (22 pages) for device md0
md0: bitmap initialized from disk: read 2 pages, set 0 of 44713 bits
md0: detected capacity change from 0 to 3000590262272
 md0: unknown partition table
EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (md0): error: couldn't mount because of unsupported optional features (244)
EXT4-fs (md0): recovery complete
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.4: new high-speed USB device number 6 using ehci_hcd
usb 1-1.4: New USB device found, idVendor=0d7d, idProduct=1400
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Memorex TD 2B   
usb 1-1.4: Manufacturer:         
usb 1-1.4: SerialNumber: 07480E011608
scsi11 : usb-storage 1-1.4:1.0
scsi 11:0:0:0: Direct-Access              Memorex TD 2B    PMAP PQ: 0 ANSI: 0 CCS
sd 11:0:0:0: Attached scsi generic sg3 type 0
sd 11:0:0:0: [sdd] 1015808 512-byte logical blocks: (520 MB/496 MiB)
sd 11:0:0:0: [sdd] Write Protect is on
sd 11:0:0:0: [sdd] Mode Sense: 03 00 80 00
sd 11:0:0:0: [sdd] No Caching mode page present
sd 11:0:0:0: [sdd] Assuming drive cache: write through
sd 11:0:0:0: [sdd] No Caching mode page present
sd 11:0:0:0: [sdd] Assuming drive cache: write through
 sdd: sdd1
sd 11:0:0:0: [sdd] No Caching mode page present
sd 11:0:0:0: [sdd] Assuming drive cache: write through
sd 11:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.3: USB disconnect, device number 3