DMESG

dmesg.log (text/plain), 45.84 KB, created by Roman on 2012-06-25 00:13:19 UTC

Linux version 3.4.3-gentoo (root@k7) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #1 SMP Mon Jun 25 00:54:00 CEST 2012
Command line: acpi_enforce_resources=lax resume=/dev/sda1 root=/dev/md0  
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable)
 BIOS-e820: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS)
 BIOS-e820: 00000000bfef3000 - 00000000bff00000 (ACPI data)
 BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000180000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: System manufacturer System Product Name/P5N-D, BIOS ASUS P5N-D ACPI BIOS Revision 1401 06/21/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x180000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CCFFF write-protect
  CD000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 100000000 mask F80000000 write-back
  3 base 0BFF00000 mask FFFF00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbfef0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-00000000bfef0000
 0000000000 - 00bfe00000 page 2M
 00bfe00000 - 00bfef0000 page 4k
kernel direct mapping tables up to bfef0000 @ 1fffb000-20000000
init_memory_mapping: 0000000100000000-0000000180000000
 0100000000 - 0180000000 page 2M
kernel direct mapping tables up to 180000000 @ bfee9000-bfef0000
ACPI: RSDP 00000000000f7660 00024 (v02 Nvidia)
ACPI: XSDT 00000000bfef30c0 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: FACP 00000000bfef9ac0 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: DSDT 00000000bfef3240 0680A (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000bfef0000 00040
ACPI: HPET 00000000bfef9d00 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
ACPI: MCFG 00000000bfef9d80 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: APIC 00000000bfef9c00 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: SSDT 00000000bfef9e00 0087B (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88017a600000-ffff88017ebfffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00180000
Movable zone start PFN for each node
Early memory PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x000bfef0
    0: 0x00100000 -> 0x00180000
On node 0 totalpages: 1310335
  DMA zone: 56 pages used for memmap
  DMA zone: 5 pages reserved
  DMA zone: 3922 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 767784 pages, LIFO batch:31
  Normal zone: 7168 pages used for memmap
  Normal zone: 517120 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
4 Processors exceeds NR_CPUS limit of 2
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bfef0000 - 00000000bfef3000
PM: Registered nosave memory: 00000000bfef3000 - 00000000bff00000
PM: Registered nosave memory: 00000000bff00000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f2000000
PM: Registered nosave memory: 00000000f2000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at bff00000 (gap: bff00000:30100000)
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88017fc00000 s71424 r8192 d22784 u1048576
pcpu-alloc: s71424 r8192 d22784 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1288826
Kernel command line: acpi_enforce_resources=lax resume=/dev/sda1 root=/dev/md0  
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
No AGP bridge found
Memory: 5084692k/6291456k available (3723k kernel code, 1050116k absent, 156648k reserved, 1653k data, 444k init)
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:512 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1866.529 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.05 BogoMIPS (lpj=1866529)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20120320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU          6320  @ 1.86GHz stepping 06
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
Booting Node   0, Processors  #1 Ok.
Brought up 2 CPUs
Total of 2 processors activated (7466.11 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbfef0000-0xbfef2fff] (12288 bytes)
RTC time: 23:00:56, date: 06/24/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf1ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xbff00000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff]
pci 0000:00:00.0: [10de:03a3] type 00 class 0x060000
pci 0000:00:00.1: [10de:03ac] type 00 class 0x050000
pci 0000:00:00.2: [10de:03aa] type 00 class 0x050000
pci 0000:00:00.3: [10de:03a9] type 00 class 0x050000
pci 0000:00:00.4: [10de:03ab] type 00 class 0x050000
pci 0000:00:00.5: [10de:03a8] type 00 class 0x050000
pci 0000:00:00.6: [10de:03b5] type 00 class 0x050000
pci 0000:00:00.7: [10de:03b4] type 00 class 0x050000
pci 0000:00:01.0: [10de:03ad] type 00 class 0x050000
pci 0000:00:01.1: [10de:03ae] type 00 class 0x050000
pci 0000:00:01.2: [10de:03af] type 00 class 0x050000
pci 0000:00:01.3: [10de:03b0] type 00 class 0x050000
pci 0000:00:01.4: [10de:03b1] type 00 class 0x050000
pci 0000:00:01.5: [10de:03b2] type 00 class 0x050000
pci 0000:00:01.6: [10de:03b3] type 00 class 0x050000
pci 0000:00:02.0: [10de:03b6] type 00 class 0x050000
pci 0000:00:02.1: [10de:03bc] type 00 class 0x050000
pci 0000:00:02.2: [10de:03ba] type 00 class 0x050000
pci 0000:00:03.0: [10de:03b7] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: [10de:0270] type 00 class 0x050000
pci 0000:00:0a.0: [10de:0260] type 00 class 0x060100
pci 0000:00:0a.1: [10de:0264] type 00 class 0x0c0500
pci 0000:00:0a.1: reg 20: [io  0x1c00-0x1c3f]
pci 0000:00:0a.1: reg 24: [io  0x1c80-0x1cbf]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.2: [10de:0272] type 00 class 0x050000
pci 0000:00:0b.0: [10de:026d] type 00 class 0x0c0310
pci 0000:00:0b.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: [10de:026e] type 00 class 0x0c0320
pci 0000:00:0b.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: [10de:0265] type 00 class 0x01018a
pci 0000:00:0d.0: reg 20: [io  0xfd00-0xfd0f]
pci 0000:00:0e.0: [10de:0266] type 00 class 0x010185
pci 0000:00:0e.0: reg 10: [io  0x09f0-0x09f7]
pci 0000:00:0e.0: reg 14: [io  0x0bf0-0x0bf3]
pci 0000:00:0e.0: reg 18: [io  0x0970-0x0977]
pci 0000:00:0e.0: reg 1c: [io  0x0b70-0x0b73]
pci 0000:00:0e.0: reg 20: [io  0xf800-0xf80f]
pci 0000:00:0e.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:0f.0: [10de:0267] type 00 class 0x010185
pci 0000:00:0f.0: reg 10: [io  0x09e0-0x09e7]
pci 0000:00:0f.0: reg 14: [io  0x0be0-0x0be3]
pci 0000:00:0f.0: reg 18: [io  0x0960-0x0967]
pci 0000:00:0f.0: reg 1c: [io  0x0b60-0x0b63]
pci 0000:00:0f.0: reg 20: [io  0xf300-0xf30f]
pci 0000:00:0f.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:10.0: [10de:026f] type 01 class 0x060401
pci 0000:00:10.1: [10de:026c] type 00 class 0x040300
pci 0000:00:10.1: reg 10: [mem 0xfe024000-0xfe027fff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:14.0: [10de:0269] type 00 class 0x068000
pci 0000:00:14.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:14.0: reg 14: [io  0xf200-0xf207]
pci 0000:00:14.0: supports D1 D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: [10de:05bf] type 01 class 0x060400
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 01-06]
pci 0000:00:03.0:   bridge window [io  0xa000-0xdfff]
pci 0000:00:03.0:   bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:00:03.0:   bridge window [mem 0xc0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: [10de:05bf] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:01.0: [10de:05bf] type 01 class 0x060400
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: [10de:05bf] type 01 class 0x060400
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:03.0: [10de:05bf] type 01 class 0x060400
pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-06]
pci 0000:01:00.0:   bridge window [io  0xa000-0xdfff]
pci 0000:01:00.0:   bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:01:00.0:   bridge window [mem 0xc0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: [10de:0ca3] type 00 class 0x030000
pci 0000:03:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 24: [io  0xdc00-0xdc7f]
pci 0000:03:00.0: reg 30: [mem 0xfbf00000-0xfbf7ffff pref]
pci 0000:03:00.1: [10de:0be4] type 00 class 0x040300
pci 0000:03:00.1: reg 10: [mem 0xfbffc000-0xfbffffff]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0:   bridge window [io  0xd000-0xdfff]
pci 0000:02:00.0:   bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:02:00.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:02:01.0: PCI bridge to [bus 04-04]
pci 0000:02:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:02:01.0:   bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:02:01.0:   bridge window [mem 0xeff00000-0xefffffff 64bit pref]
pci 0000:02:02.0: PCI bridge to [bus 05-05]
pci 0000:02:02.0:   bridge window [io  0xb000-0xbfff]
pci 0000:02:02.0:   bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:02:02.0:   bridge window [mem 0xefe00000-0xefefffff 64bit pref]
pci 0000:02:03.0: PCI bridge to [bus 06-06]
pci 0000:02:03.0:   bridge window [io  0xa000-0xafff]
pci 0000:02:03.0:   bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:02:03.0:   bridge window [mem 0xefd00000-0xefdfffff 64bit pref]
pci 0000:07:08.0: [1106:3044] type 00 class 0x0c0010
pci 0000:07:08.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
pci 0000:07:08.0: reg 14: [io  0xec00-0xec7f]
pci 0000:07:08.0: supports D2
pci 0000:07:08.0: PME# supported from D2 D3hot D3cold
pci 0000:00:10.0: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:10.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:10.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:10.0:   bridge window [mem 0xfde00000-0xfdefffff pref]
pci 0000:00:10.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:10.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:10.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:10.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:10.0:   bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f000 - 000000000009ffff 
reserve RAM buffer: 00000000bfef0000 - 00000000bfffffff 
cfg80211: Calling CRDA to update world regulatory domain
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xbff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io  0x1000-0x107f]
pnp 00:01: [io  0x1080-0x10ff]
pnp 00:01: [io  0x1400-0x147f]
pnp 00:01: [io  0x1480-0x14ff]
pnp 00:01: [io  0x1800-0x187f]
pnp 00:01: [io  0x1880-0x18ff]
system 00:01: [io  0x1000-0x107f] has been reserved
system 00:01: [io  0x1080-0x10ff] has been reserved
system 00:01: [io  0x1400-0x147f] has been reserved
system 00:01: [io  0x1480-0x14ff] has been reserved
system 00:01: [io  0x1800-0x187f] has been reserved
system 00:01: [io  0x1880-0x18ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io  0x0010-0x001f]
pnp 00:02: [io  0x0022-0x003f]
pnp 00:02: [io  0x0044-0x005f]
pnp 00:02: [io  0x0062-0x0063]
pnp 00:02: [io  0x0065-0x006f]
pnp 00:02: [io  0x0074-0x007f]
pnp 00:02: [io  0x0091-0x0093]
pnp 00:02: [io  0x00a2-0x00bf]
pnp 00:02: [io  0x00e0-0x00ef]
pnp 00:02: [io  0x04d0-0x04d1]
pnp 00:02: [io  0x0800-0x087f]
pnp 00:02: [io  0x0290-0x0297]
pnp 00:02: [io  0x0880-0x088f]
system 00:02: [io  0x04d0-0x04d1] has been reserved
system 00:02: [io  0x0800-0x087f] has been reserved
system 00:02: [io  0x0290-0x0297] has been reserved
system 00:02: [io  0x0880-0x088f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0080-0x0090]
pnp 00:03: [io  0x0094-0x009f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io  0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io  0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io  0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io  0x03f0-0x03f5]
pnp 00:08: [io  0x03f7]
pnp 00:08: [irq 6]
pnp 00:08: [dma 2]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:09: [io  0x03f8-0x03ff]
pnp 00:09: [irq 4]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io  0x0378-0x037f]
pnp 00:0a: [io  0x0778-0x077b]
pnp 00:0a: [irq 7]
pnp 00:0a: [dma 3]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0b: [io  0x0060]
pnp 00:0b: [io  0x0064]
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:0c: [mem 0xf0000000-0xf1ffffff]
system 00:0c: [mem 0xf0000000-0xf1ffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x000f0000-0x000f3fff]
pnp 00:0d: [mem 0x000f4000-0x000f7fff]
pnp 00:0d: [mem 0x000f8000-0x000fbfff]
pnp 00:0d: [mem 0x000fc000-0x000fffff]
pnp 00:0d: [mem 0xfeff0000-0xfeff00ff]
pnp 00:0d: [mem 0xbfef0000-0xbfefffff]
pnp 00:0d: [mem 0xffff0000-0xffffffff]
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x00100000-0xbfeeffff]
pnp 00:0d: [mem 0xfec00000-0xfec00fff]
pnp 00:0d: [mem 0xfee00000-0xfee00fff]
pnp 00:0d: [mem 0xfeff0000-0xfeff03ff]
system 00:0d: [mem 0x000f0000-0x000f3fff] could not be reserved
system 00:0d: [mem 0x000f4000-0x000f7fff] could not be reserved
system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0d: [mem 0xfeff0000-0xfeff00ff] has been reserved
system 00:0d: [mem 0xbfef0000-0xbfefffff] could not be reserved
system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x00100000-0xbfeeffff] could not be reserved
system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xfeff0000-0xfeff03ff] could not be reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0:   bridge window [io  0xd000-0xdfff]
pci 0000:02:00.0:   bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:02:00.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:02:01.0: PCI bridge to [bus 04-04]
pci 0000:02:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:02:01.0:   bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:02:01.0:   bridge window [mem 0xeff00000-0xefffffff 64bit pref]
pci 0000:02:02.0: PCI bridge to [bus 05-05]
pci 0000:02:02.0:   bridge window [io  0xb000-0xbfff]
pci 0000:02:02.0:   bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:02:02.0:   bridge window [mem 0xefe00000-0xefefffff 64bit pref]
pci 0000:02:03.0: PCI bridge to [bus 06-06]
pci 0000:02:03.0:   bridge window [io  0xa000-0xafff]
pci 0000:02:03.0:   bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:02:03.0:   bridge window [mem 0xefd00000-0xefdfffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-06]
pci 0000:01:00.0:   bridge window [io  0xa000-0xdfff]
pci 0000:01:00.0:   bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:01:00.0:   bridge window [mem 0xc0000000-0xefffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 01-06]
pci 0000:00:03.0:   bridge window [io  0xa000-0xdfff]
pci 0000:00:03.0:   bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:00:03.0:   bridge window [mem 0xc0000000-0xefffffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 07-07]
pci 0000:00:10.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:10.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:10.0:   bridge window [mem 0xfde00000-0xfdefffff pref]
pci 0000:00:10.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xa000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xa000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfcffffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xefffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:03: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:04: resource 2 [mem 0xeff00000-0xefffffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xfce00000-0xfcefffff]
pci_bus 0000:05: resource 2 [mem 0xefe00000-0xefefffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0xa000-0xafff]
pci_bus 0000:06: resource 1 [mem 0xfcd00000-0xfcdfffff]
pci_bus 0000:06: resource 2 [mem 0xefd00000-0xefdfffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:07: resource 2 [mem 0xfde00000-0xfdefffff pref]
pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0xbff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
pci 0000:03:00.0: Boot video device
PCI: CLS 32 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800bbee9000 - ffff8800bfee9000
software IO TLB at phys 0xbbee9000 - 0xbfee9000
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 9931
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:03.0: irq 40 for MSI/MSI-X
Non-volatile memory driver v1.3
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
Loading iSCSI transport class v2.0-870.
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 21
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 21
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
sata_nv 0000:00:0f.0: Using SWNCQ mode
sata_nv 0000:00:0f.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 20
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 20
pata_amd 0000:00:0d.0: version 0.4.1
pata_amd 0000:00:0d.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: reset hcs_params 0x101888 dbg=1 cc=1 pcc=8 !ppc ports=8
ehci_hcd 0000:00:0b.1: reset portroute 0 0 0 0 0 0 0 0 
ehci_hcd 0000:00:0b.1: reset hcc_params a086 caching frame 256/512/1024 park
ehci_hcd 0000:00:0b.1: park 0
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: reset command 0080b02  park=3 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
ehci_hcd 0000:00:0b.1: supports USB remote wakeup
ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe02e000
ehci_hcd 0000:00:0b.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.3-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.1
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: created debug files
ohci_hcd 0000:00:0b.0: supports USB remote wakeup
ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000
ohci_hcd 0000:00:0b.0: OHCI controller state
ohci_hcd 0000:00:0b.0: OHCI 1.0, NO legacy support registers, rh state running
ohci_hcd 0000:00:0b.0: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:0b.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:0b.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:0b.0: intrenable 0x8000004a MIE RHSC RD WDH
ohci_hcd 0000:00:0b.0: hcca frame #0003
ohci_hcd 0000:00:0b.0: roothub.a 01000208 POTPGT=1 NPS NDP=8(8)
ohci_hcd 0000:00:0b.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:0b.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:0b.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:0b.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:0b.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:0b.0: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:0b.0: roothub.portstatus [4] 0x00000100 PPS
ohci_hcd 0000:00:0b.0: roothub.portstatus [5] 0x00000100 PPS
ohci_hcd 0000:00:0b.0: roothub.portstatus [6] 0x00000100 PPS
ohci_hcd 0000:00:0b.0: roothub.portstatus [7] 0x00000100 PPS
usb usb2: default language 0x0409
usb usb2: udev 1, busnum 2, minor = 128
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.4.3-gentoo ohci_hcd
usb usb2: SerialNumber: 0000:00:0b.0
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:0b.1: HS companion for 0000:00:0b.0
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
md: raid1 personality registered for level 1
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
PM: Checking hibernation image partition /dev/sda1
ehci_hcd 0000:00:0b.1: GetStatus port:4 status 001803 0  ACK POWER sig=j CSC CONNECT
hub 1-0:1.0: port 4: status 0501 change 0001
ehci_hcd 0000:00:0b.1: GetStatus port:7 status 001803 0  ACK POWER sig=j CSC CONNECT
hub 1-0:1.0: port 7: status 0501 change 0001
input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio1/input/input2
hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 8 chg 0090 evt 0000
hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:0b.1: port 4 high speed
ehci_hcd 0000:00:0b.1: GetStatus port:4 status 001005 0  ACK POWER sig=se0 PE CONNECT
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-4: new high-speed USB device number 2 using ehci_hcd
ata5.01: ATAPI: LITE-ON DVDRW LH-20A1H, LL06, max UDMA/66
ata5: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (600:30:0x1c)
ata5.01: limited to UDMA/33 due to 40-wire cable
ata5.01: configured for UDMA/33
ehci_hcd 0000:00:0b.1: port 4 high speed
ehci_hcd 0000:00:0b.1: GetStatus port:4 status 001005 0  ACK POWER sig=se0 PE CONNECT
usb 1-4: default language 0x0409
usb 1-4: udev 2, busnum 1, minor = 1
usb 1-4: New USB device found, idVendor=1a40, idProduct=0101
usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-4: Product: USB 2.0 Hub
usb 1-4: usb_probe_device
usb 1-4: configuration #1 chosen from 1 choice
usb 1-4: adding 1-4:1.0 (config #1, interface 0)
hub 1-4:1.0: usb_probe_interface
hub 1-4:1.0: usb_probe_interface - got id
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
hub 1-4:1.0: standalone hub
hub 1-4:1.0: ganged power switching
hub 1-4:1.0: global over-current protection
hub 1-4:1.0: Single TT
hub 1-4:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-4:1.0: power on to power good time: 100ms
hub 1-4:1.0: local power source is good
hub 1-4:1.0: no over-current condition exists
hub 1-4:1.0: enabling power on all ports
drivers/usb/core/inode.c: creating file '002'
hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
ehci_hcd 0000:00:0b.1: port 7 high speed
ehci_hcd 0000:00:0b.1: GetStatus port:7 status 001005 0  ACK POWER sig=se0 PE CONNECT
sd 0:0:0:0: [sda] Attached SCSI disk
hub 1-4:1.0: port 2: status 0101 change 0001
hub 1-4:1.0: port 3: status 0301 change 0001
hub 1-4:1.0: port 4: status 0101 change 0001
usb 1-7: new high-speed USB device number 3 using ehci_hcd
ehci_hcd 0000:00:0b.1: port 7 high speed
ehci_hcd 0000:00:0b.1: GetStatus port:7 status 001005 0  ACK POWER sig=se0 PE CONNECT
usb 1-4: link qh256-0001/ffff880179b164c0 start 1 [1/0 us]
usb 1-7: default language 0x0409
usb 1-7: udev 3, busnum 1, minor = 2
usb 1-7: New USB device found, idVendor=04b8, idProduct=012e
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: EPSON Scanner
usb 1-7: Manufacturer: EPSON
usb 1-7: usb_probe_device
usb 1-7: configuration #1 chosen from 1 choice
usb 1-7: adding 1-7:1.0 (config #1, interface 0)
drivers/usb/core/inode.c: creating file '003'
hub 1-4:1.0: state 7 ports 4 chg 001c evt 0000
hub 1-4:1.0: port 2, status 0101, change 0000, 12 Mb/s
usb 1-4.2: new high-speed USB device number 4 using ehci_hcd
usb 1-4.2: skipped 4 descriptors after interface
usb 1-4.2: skipped 2 descriptors after interface
usb 1-4.2: skipped 1 descriptor after endpoint
usb 1-4.2: default language 0x0409
usb 1-4.2: udev 4, busnum 1, minor = 3
usb 1-4.2: New USB device found, idVendor=1415, idProduct=2000
usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.2: Product: USB Camera-B4.09.24.1
usb 1-4.2: Manufacturer: OmniVision Technologies, Inc.
usb 1-4.2: usb_probe_device
usb 1-4.2: configuration #1 chosen from 1 choice
usb 1-4.2: adding 1-4.2:1.0 (config #1, interface 0)
usb 1-4.2: adding 1-4.2:1.1 (config #1, interface 1)
usb 1-4.2: adding 1-4.2:1.2 (config #1, interface 2)
drivers/usb/core/inode.c: creating file '004'
hub 1-4:1.0: port 3, status 0301, change 0000, 1.5 Mb/s
usb 1-4.3: new low-speed USB device number 5 using ehci_hcd
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: Hitachi HDS721050CLA362, JP2OA3MA, max UDMA/133
ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-4.3: skipped 1 descriptor after interface
usb 1-4.3: default language 0x0409
usb 1-4.3: udev 5, busnum 1, minor = 4
usb 1-4.3: New USB device found, idVendor=046d, idProduct=c00e
usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.3: Product: USB-PS/2 Optical Mouse
usb 1-4.3: Manufacturer: Logitech
usb 1-4.3: usb_probe_device
usb 1-4.3: configuration #1 chosen from 1 choice
usb 1-4.3: adding 1-4.3:1.0 (config #1, interface 0)
usbhid 1-4.3:1.0: usb_probe_interface
usbhid 1-4.3:1.0: usb_probe_interface - got id
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0b.1/usb1/1-4/1-4.3/1-4.3:1.0/input/input3
generic-usb 0003:046D:C00E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.1-4.3/input0
drivers/usb/core/inode.c: creating file '005'
hub 1-4:1.0: port 4, status 0101, change 0000, 12 Mb/s
Refined TSC clocksource calibration: 1866.649 MHz.
Switching to clocksource tsc
usb 1-4.4: new high-speed USB device number 6 using ehci_hcd
usb 1-4.4: default language 0x0409
usb 1-4.4: udev 6, busnum 1, minor = 5
usb 1-4.4: New USB device found, idVendor=05e3, idProduct=0723
usb 1-4.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2
usb 1-4.4: Product: USB Storage
usb 1-4.4: Manufacturer: Generic 
usb 1-4.4: SerialNumber: 000000009454
usb 1-4.4: usb_probe_device
usb 1-4.4: configuration #1 chosen from 1 choice
usb 1-4.4: adding 1-4.4:1.0 (config #1, interface 0)
usb-storage 1-4.4:1.0: usb_probe_interface
usb-storage 1-4.4:1.0: usb_probe_interface - got id
scsi6 : usb-storage 1-4.4:1.0
drivers/usb/core/inode.c: creating file '006'
hub 1-4:1.0: state 7 ports 4 chg 0000 evt 0004
ata4: SATA link down (SStatus 0 SControl 300)
scsi 4:0:1:0: CD-ROM            LITE-ON  DVDRW LH-20A1H   LL06 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:1:0: Attached scsi CD-ROM sr0
sr 4:0:1:0: Attached scsi generic sg2 type 5
PM: Hibernation image partition 8:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
  Magic number: 0:207:50
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 4 and added 4 devices.
md: autorun ...
md: considering sdb3 ...
md:  adding sdb3 ...
md: sdb2 has different UUID to sdb3
md:  adding sda3 ...
md: sda2 has different UUID to sdb3
md: created md1
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
bio: create slab <bio-1> at 1
md/raid1:md1: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 452088561664
md: considering sdb2 ...
md:  adding sdb2 ...
md:  adding sda2 ...
md: created md0
md: bind<sda2>
md: bind<sdb2>
md: running: <sdb2><sda2>
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 40007696384
md: ... autorun DONE.
 md0: unknown partition table
REISERFS (device md0): found reiserfs format "3.6" with standard journal
REISERFS (device md0): using ordered data mode
reiserfs: using flush barriers
REISERFS (device md0): journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device md0): checking transaction log (md0)
REISERFS (device md0): Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly on device 9:0.
Freeing unused kernel memory: 444k freed
scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9454 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
udevd[802]: starting version 182
ACPI Warning: 0x0000000000001c00-0x0000000000001c3f SystemIO conflicts with Region \_SB_.PCI0.SM00 1 (20120320/utaddress-251)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
ACPI Warning: 0x0000000000001c80-0x0000000000001cbf SystemIO conflicts with Region \_SB_.PCI0.SM01 1 (20120320/utaddress-251)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i2c i2c-1: nForce2 SMBus adapter at 0x1c80
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
forcedeth 0000:00:14.0: setting latency timer to 64
ppdev: user-space parallel port driver
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
 md1: unknown partition table
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 48:5b:39:31:9f:a2
forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
hda_intel: Disabling MSI
snd_hda_intel 0000:00:10.1: setting latency timer to 64
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  302.17  Tue Jun 12 16:03:22 PDT 2012
Linux video capture interface: v2.00
gspca_main: v2.14.0 registered
ov534 1-4.2:1.0: usb_probe_interface
ov534 1-4.2:1.0: usb_probe_interface - got id
gspca_main: ov534-2.14.0 probing 1415:2000
ov534 1-4.2:1.1: usb_probe_interface
ov534 1-4.2:1.1: usb_probe_interface - got id
ov534 1-4.2:1.2: usb_probe_interface
ov534 1-4.2:1.2: usb_probe_interface - got id
usbcore: registered new interface driver ov534
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
hda_intel: Disabling MSI
reiserfs: enabling write barrier flush mode
Adding 7823616k swap on /dev/sda1.  Priority:-1 extents:1 across:7823616k 
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md1): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (md1): using internal journal
EXT3-fs (md1): mounted filesystem with writeback data mode
usb 1-4.3: link qh8-0601/ffff880174eb7c40 start 2 [1/2 us]
eth0: no IPv6 routers present
it87: Found IT8718F chip at 0x290, revision 4
ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \IP__ 1 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \_SB_.PCI0.ASOC.HWRE 2 (20120320/utaddress-251)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ehci_hcd 0000:00:0b.1: shutdown urb ffff8801698f0e40 ep1in-bulk
ehci_hcd 0000:00:0b.1: shutdown urb ffff8801698ed440 ep1in-bulk