ized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009dc00 - 000000000009ffff reserve RAM buffer: 00000000cff80000 - 00000000cfffffff HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000d0000-0x000dffff window] pnp 00:00: [mem 0xd0000000-0xffffffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [mem 0xfed14000-0xfed19fff] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:02: [dma 4] pnp 00:02: [io 0x0000-0x000f] pnp 00:02: [io 0x0081-0x0083] pnp 00:02: [io 0x0087] pnp 00:02: [io 0x0089-0x008b] pnp 00:02: [io 0x008f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [io 0x0070-0x0071] pnp 00:03: [irq 8] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: [io 0x0061] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: [io 0x00f0-0x00ff] pnp 00:05: [irq 13] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:06: [irq 6] pnp 00:06: [dma 2] pnp 00:06: [io 0x03f0-0x03f5] pnp 00:06: [io 0x03f7] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:07: [io 0x0000-0xffffffff disabled] pnp 00:07: [io 0x0000-0xffffffff disabled] pnp 00:07: [io 0x0290-0x0297] system 00:07: [io 0x0290-0x0297] has been reserved system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:08: [io 0x0010-0x001f] pnp 00:08: [io 0x0022-0x003f] pnp 00:08: [io 0x0044-0x004d] pnp 00:08: [io 0x0050-0x005f] pnp 00:08: [io 0x0062-0x0063] pnp 00:08: [io 0x0065-0x006f] pnp 00:08: [io 0x0072-0x007f] pnp 00:08: [io 0x0080] pnp 00:08: [io 0x0084-0x0086] pnp 00:08: [io 0x0088] pnp 00:08: [io 0x008c-0x008e] pnp 00:08: [io 0x0090-0x009f] pnp 00:08: [io 0x00a2-0x00bf] pnp 00:08: [io 0x00e0-0x00ef] pnp 00:08: [io 0x04d0-0x04d1] pnp 00:08: [io 0x0800-0x087f] pnp 00:08: [io 0x0400-0x03ff disabled] pnp 00:08: [io 0x0480-0x04bf] pnp 00:08: [mem 0xfed1c000-0xfed1ffff] pnp 00:08: [mem 0xfed20000-0xfed3ffff] pnp 00:08: [mem 0xfed50000-0xfed8ffff] pnp 00:08: [mem 0xffa00000-0xffafffff] pnp 00:08: [mem 0xffb00000-0xffbfffff] pnp 00:08: [mem 0xffe00000-0xffefffff] pnp 00:08: [mem 0xfff00000-0xfffffffe] system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: [io 0x0800-0x087f] has been reserved system 00:08: [io 0x0480-0x04bf] has been reserved system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved system 00:08: [mem 0xffa00000-0xffafffff] has been reserved system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved system 00:08: [mem 0xffe00000-0xffefffff] has been reserved system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [mem 0xfed00000-0xfed003ff] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:0a: [irq 4] pnp 00:0a: [dma 0 disabled] pnp 00:0a: [io 0x03f8-0x03ff] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0b: [mem 0xfec00000-0xfec00fff] pnp 00:0b: [mem 0xfee00000-0xfee00fff] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [io 0x0060] pnp 00:0c: [io 0x0064] pnp 00:0c: [irq 1] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:0d: [mem 0xe0000000-0xefffffff] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0e: [mem 0x00000000-0x0009ffff] pnp 00:0e: [mem 0x000c0000-0x000cffff] pnp 00:0e: [mem 0x000e0000-0x000fffff] pnp 00:0e: [mem 0x00100000-0xcfffffff] pnp 00:0e: [mem 0x00000000-0xffffffff disabled] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1c.5: BAR 9: assigned [mem 0xf0000000-0xf01fffff 64bit pref] pci 0000:00:1c.5: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:1c.4: BAR 9: assigned [mem 0xf0200000-0xf03fffff 64bit pref] pci 0000:00:1c.0: BAR 8: assigned [mem 0xf0400000-0xf07fffff] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 04-04] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf07fffff] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 03-03] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:00:1c.4: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] pci 0000:00:1c.5: PCI bridge to [bus 02-02] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 05-05] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0106 -> 0107) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: enabling device (0106 -> 0107) pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf07fffff] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1a.0: PCI INT A disabled pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1a.1: PCI INT B disabled pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1a.2: PCI INT C disabled pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1a.7: PCI INT C disabled pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1d.0: PCI INT A disabled pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1d.1: PCI INT B disabled pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1d.2: PCI INT C disabled pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1d.7: PCI INT A disabled pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 9340k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) type=2000 audit(1339434303.620:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 1710 async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) start plist test end plist test pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:01.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X pcieport 0000:00:1c.5: setting latency timer to 64 pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Generic RTC Driver v1.07 vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: protected mode interface info at c000:a15e vesafb: pmi: set display start = c00ca200, set palette = c00ca2be vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 3072k, total 16384k Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found ioatdma: Intel(R) QuickData Technology Driver 4.00 brd: module loaded loop: module loaded Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_marvell 0000:03:00.0: setting latency timer to 64 scsi0 : pata_marvell scsi1 : pata_marvell ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16 ata2: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16 scsi2 : pata_legacy ata3: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 ata1.00: ATAPI: PIONEER DVD RW DVR-108, 1.14, max UDMA/66 ata1.00: configured for UDMA/66 scsi 0:0:0:0: CD-ROM PIONEER DVD RW DVR-108 1.14 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 Refined TSC clocksource calibration: 2666.617 MHz. Switching to clocksource tsc scsi3 : pata_legacy ata4: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mousedev: PS/2 mouse device common for all mice md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 17 Registering the dns_resolver key type Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 456k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22 ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22 ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi6 : ata_piix scsi7 : ata_piix ata7: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 22 ata8: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 22 ata7: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: ATA-8: OCZ CORE_SSD, 02.10104, max UDMA/100 ata6.00: 125206528 sectors, multi 0: LBA ata8.00: ATA-7: SAMSUNG HD753LJ, 1AA01108, max UDMA7 ata8.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata6.00: configured for UDMA/100 ata8.00: configured for UDMA/133 scsi 5:0:0:0: Direct-Access ATA OCZ CORE_SSD 02.1 PQ: 0 ANSI: 5 sd 5:0:0:0: [sda] 125206528 512-byte logical blocks: (64.1 GB/59.7 GiB) sd 5:0:0:0: [sda] Write Protect is off sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA scsi 7:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 sd 7:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 5:0:0:0: [sda] Attached SCSI disk sdb: sdb1 sd 7:0:0:0: [sdb] Attached SCSI disk sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 5:0:0:0: Attached scsi generic sg1 type 0 sd 7:0:0:0: Attached scsi generic sg2 type 0 NCR53c406a: no available ports found scsi: Detection failed (no card) GDT-HA: Storage RAID Controller Driver. Version: 3.05 qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! NCR53c406a: no available ports found imm: Version 2.05 (for Linux 2.4.0) sym53c416.c: Version 1.0.0-ac Fusion MPT base driver 3.04.20 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.20 Fusion MPT FC Host driver 3.04.20 Fusion MPT SAS Host driver 3.04.20 3ware Storage Controller device driver for Linux v1.26.02.003. 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.26) Adaptec aacraid driver 1.1-7[28000]-ms megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011 qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.12-k. Emulex LightPulse Fibre Channel SCSI driver 8.3.27 Copyright(c) 2004-2009 Emulex. All rights reserved. aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8ffc00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.2.12-gentoo ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8ff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 3.2.12-gentoo ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 3.2.12-gentoo uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.2.12-gentoo uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 3.2.12-gentoo uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 3.2.12-gentoo uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 3.2.12-gentoo uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 3.2.12-gentoo uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver usbcore: registered new interface driver usbhid usbhid: USB HID core driver sl811: driver sl811-hcd, 19 May 2005 usb 2-4: new high-speed USB device number 3 using ehci_hcd usb 2-4: New USB device found, idVendor=0951, idProduct=1643 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-4: Product: DataTraveler G3 usb 2-4: Manufacturer: Kingston usb 2-4: SerialNumber: 001CC0EC345ABC41163F01A7 scsi10 : usb-storage 2-4:1.0 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com usb 3-1: new low-speed USB device number 2 using uhci_hcd usb 3-1: New USB device found, idVendor=046d, idProduct=c03e usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: USB-PS/2 Optical Mouse usb 3-1: Manufacturer: Logitech input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input1 generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1/input0 md: raid10 personality registered for level 10 usb 7-1: new low-speed USB device number 2 using uhci_hcd JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem fuse init (API version 7.17) usb 7-1: New USB device found, idVendor=046d, idProduct=c216 usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-1: Product: Logitech Dual Action usb 7-1: Manufacturer: Logitech e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. input: Logitech Logitech Dual Action as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input2 generic-usb 0003:046D:C216.0002: input,hidraw1: USB HID v1.10 Joystick [Logitech Logitech Dual Action] on usb-0000:00:1d.1-1/input0 scsi 10:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 4 sd 10:0:0:0: Attached scsi generic sg3 type 0 sd 10:0:0:0: [sdc] 30916608 512-byte logical blocks: (15.8 GB/14.7 GiB) sd 10:0:0:0: [sdc] Write Protect is off sd 10:0:0:0: [sdc] Mode Sense: 23 00 00 00 sd 10:0:0:0: [sdc] No Caching mode page present sd 10:0:0:0: [sdc] Assuming drive cache: write through sd 10:0:0:0: [sdc] No Caching mode page present sd 10:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 10:0:0:0: [sdc] No Caching mode page present sd 10:0:0:0: [sdc] Assuming drive cache: write through sd 10:0:0:0: [sdc] Attached SCSI removable disk mount: sending ioctl 5310 to a partition! mount: sending ioctl 5310 to a partition! mount: sending ioctl 5310 to a partition! mount: sending ioctl 5310 to a partition! UDF-fs: warning (device sda2): udf_fill_super: No partition found (1) EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240) EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240) mount: sending ioctl 5310 to a partition! mount: sending ioctl 5310 to a partition! mount: sending ioctl 5310 to a partition! mount: sending ioctl 5310 to a partition! UDF-fs: warning (device sda3): udf_fill_super: No partition found (1) EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) EXT3-fs (sdb1): error: couldn't mount because of unsupported optional features (240) EXT2-fs (sdb1): error: couldn't mount because of unsupported optional features (240) mount: sending ioctl 5310 to a partition! mount: sending ioctl 5310 to a partition! UDF-fs: warning (device sdb1): udf_fill_super: No partition found (1) EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) udevd[18538]: starting version 171 input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 ACPI: Power Button [PWRF] Linux agpgart interface v0.103 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 input: PC Speaker as /devices/platform/pcspkr/input/input5 iTCO_vendor_support: vendor-support=0 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 atl1 0000:02:00.0: setting latency timer to 64 atl1 0000:02:00.0: version 2.1.3 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X snd_hda_intel 0000:00:1b.0: setting latency timer to 64 fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. Disabling lock debugging due to kernel taint hda_codec: ALC883: BIOS auto-probing. snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X snd_hda_intel 0000:01:00.1: setting latency timer to 64 [fglrx] Maximum main memory to use for locked dma buffers: 3145 MBytes. [fglrx] vendor: 1002 device: 94b3 count: 1 [fglrx] ioport: bar 4, base 0xd000, size: 0x100 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:01:00.0: setting latency timer to 64 [fglrx] Kernel PAT support is enabled [fglrx] module loaded - fglrx 8.96.4 [Apr 5 2012] with 1 minors HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 atl1 0000:02:00.0: irq 46 for MSI/MSI-X atl1 0000:02:00.0: eth0 link is up 1000 Mbps full duplex EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) NET: Registered protocol family 10 fglrx_pci 0000:01:00.0: irq 47 for MSI/MSI-X [fglrx] Firegl kernel thread PID: 19453 [fglrx] Firegl kernel thread PID: 19454 [fglrx] Firegl kernel thread PID: 19455 divide error: 0000 [#1] [fglrx] IRQ 47 Enabled SMP Modules linked in: ipv6 snd_hda_codec_hdmi fglrx(P) snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_pcm snd_timer iTCO_wdt snd atl1 i2c_i801 iTCO_vendor_support intel_agp joydev pcspkr intel_gtt mii i2c_core floppy snd_page_alloc agpgart processor button thermal_sys sha256_generic tg3 libphy e1000 fuse xfs exportfs jfs ext4 jbd2 raid10 dm_snapshot dm_crypt dm_mirror dm_region_hash dm_log dm_mod scsi_wait_scan hid_sunplus hid_sony hid_samsung hid_pl hid_petalynx hid_monterey hid_microsoft hid_logitech hid_gyration hid_ezkey hid_cypress hid_chicony hid_cherry hid_belkin hid_apple hid_a4tech sl811_hcd usbhid ohci_hcd ssb uhci_hcd usb_storage ehci_hcd usbcore usb_common aic94xx libsas lpfc qla2xxx megaraid_sas megaraid_mbox megaraid_mm megaraid aacraid sx8 DAC960 cciss 3w_9xxx 3w_xxxx mptsas scsi_transport_sas mptfc scsi_transport_fc scsi_tgt mptspi mptscsih mptbase atp870u dc395x qla1280 imm parport dmx3191d sym53c8xx qlogicfas408 gdth advansys initio BusLogic arcmsr aic7xxx aic79xx scsi_transport_spi sg pdc_adma sata_inic162x sata_mv ata_piix ahci libahci sata_qstor sata_vsc sata_uli sata_sis sata_sx4 sata_nv sata_via sata_svw sata_sil24 sata_sil sata_promise pata_pcmcia pcmcia pcmcia_core Pid: 19453, comm: firegl Tainted: P O 3.2.12-gentoo #1 System manufacturer P5K SE/EPU/P5K SE/EPU EIP: 0060:[] EFLAGS: 00010246 CPU: 3 EIP is at __udivdi3+0x2a/0x34 [fglrx] EAX: 3b9aca00 EBX: 00000000 ECX: 00000000 EDX: 00000000 ESI: 3b9aca00 EDI: 00000000 EBP: f2083d84 ESP: f2083d74 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process firegl (pid: 19453, ti=f2082000 task=f72eb9a0 task.ti=f2082000) Stack: 00000000 f044cc80 3b9aca00 00000000 f2083dd4 f9ae1c6a 3b9aca00 00000000 00000000 00000000 00000003 00000001 f2083dd4 f9b1473f f9d42c8c f2083dd4 f9ae1bd0 0000000d 00000004 f9c05264 00001336 00000001 f2083e4c f044cc80 Call Trace: [] KAS_Event_WaitForEvent+0x5d/0x430 [fglrx] [] ? firegl_trace+0x1f/0x180 [fglrx] [] ? KAS_Event_Set+0x53/0x5d [fglrx] [] MCIL_KernelEvent+0x152/0x360 [fglrx] [] IRQMGR_KernelEvent_WaitForSignal+0x5a/0x60 [fglrx] [] PassiveRing_WorkerThreadRoutine+0xb9/0x300 [fglrx] [] ? __switch_to+0x116/0x1a5 [] ? __schedule+0x633/0x6b0 [] ? try_to_wake_up+0x1b7/0x1c1 [] ? firegl_trace+0x1f/0x180 [fglrx] [] ? FGLDRM_name_info+0xac/0xac [fglrx] [] IRQMGR_WorkerThreadRoutine+0x19/0x40 [fglrx] [] ? FGLDRM_name_info+0xac/0xac [fglrx] [] IRQMGR_CallbackWrapper+0xf/0x20 [fglrx] [] kasThreadRoutineHelper+0x36/0x54 [fglrx] [] ? IRQMGR_QueueDpc+0x30/0x30 [fglrx] [] kthread+0x62/0x67 [] ? kthread_worker_fn+0x111/0x111 [] kernel_thread_helper+0x6/0xd Code: c3 55 89 e5 57 56 53 51 8d 4d 08 8b 31 8b 79 04 8b 59 08 89 f0 89 fa 89 d1 31 d2 85 c9 89 c6 74 08 89 c8 31 d2 f7 f3 89 c1 89 f0 f3 89 ca 59 5b 5e 5f 5d c3 55 89 e5 56 53 51 8d 4d 08 8b 19 EIP: [] __udivdi3+0x2a/0x34 [fglrx] SS:ESP 0068:f2083d74 ---[ end trace b8259a8cccce52b6 ]--- [fglrx] Gart USWC size:1032 M. [fglrx] Gart cacheable size:407 M. [fglrx] Reserved FB block: Shared offset:0, size:1000000 [fglrx] Reserved FB block: Unshared offset:fcc5000, size:33b000 [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 eth0: no IPv6 routers present