/etc/ppp/chat-tmobile

chat-tmobile (text/plain), 1.72 KB, created by Martin Mokrejš on 2012-01-30 14:26:58 UTC

# /etc/ppp/chat-default:
# $Header: /var/cvsroot/gentoo-x86/net-dialup/ppp/files/chat-default,v 1.2 2004/07/18 03:50:48 dragonheart Exp $

# AT X0 E1 L1 M1 N1 T Q0 V1 Y0 &C1 &D2 &K3 &P2 &S0 %C3 %E2
# at+ms?
# 92,1,300,56000
# OK

# ati4
# Manufacturer: ZTE CORPORATION
# Model: MF102
# Revision: BD_P671A1V1.0.3B15
# IMEI: 359047031110511
# +GCAP: +CGSM,+DS,+ES

# ati
# Manufacturer: huawei
# Model: E1750
# Revision: 11.126.03.00.55
# IMEI: 354818043625588
# +GCAP: +CGSM,+DS,+ES

# ati4
# Manufacturer: huawei
# Model: E1823
# Revision: 11.825.03.10.55
# IMEI: 357509030792708
# +GCAP: +CGSM,+DS,+ES
# 
# OK
# 
# ^BOOT:30792708,0,0,0,99


# ""      "AT+CSQ"
# It returns the signal quality in RSSI (Received Signal Strength Indication) and in BER (Bit Error Rate, reported in percent). There is a misunderstanding of rssi in the sentence above. A higher rssi value represents a stronger signal, scale is from 0 to 99, where 1 is the lowest detectable signal and 31 a very good signal. Don't expect your signal to go all the way up to 99, though. If BER returns 99 it means not known or not detectable.
# Command return is "+CSQ: <rssi>,<ber>" 


'' "AT"
OK      "ATE1"
# OK 'AT Q0 V1 E1 S0=0 &C0 &D2 +FCLASS=0'

# Setting for connections via GPRS/EDGE/3G
OK 'AT+CGDCONT=1,"IP","internet.t-mobile.cz"'

# Settings for the old "4G" connection provided only in few ares of the Czech Republic. It is not really a 4G network.
# OK 'AT+CGDCONT=1,"PPP","internet.t-mobile.cz","0,0",0,0'

'ABORT' 'BUSY'
'ABORT' 'ERROR'
'ABORT' 'NO ANSWER'
'ABORT' 'NO CARRIER'
'ABORT' 'NO DIALTONE'
'ABORT' 'Invalid Login'
'ABORT' 'Login incorrect'
REPORT CONNECT
TIMEOUT 15

#SAY "\nDialing *99#\n"
#OK "ATDT*99#"
OK "atdt*99***1#"
SAY "\nWaiting for CONNECT string\n"
CONNECT \d\c