dmesg with x86 nofb kernel, no extra options

nofb-dmesg.txt (text/plain), 30.69 KB, created by Martin Mokrejš on 2012-01-25 13:57:18 UTC

root=/dev/ram0 init=/linuxrc dokeymap aufs looptype=squashfs loop=/image.squashfs cdroot initrd=/boot/gentoo.igz nomodeset BOOT_IMAGE=/boot/gentoo 
8086:24c4] type 0 class 0x000c03
[    0.033152] pci 0000:00:1d.1: reg 20: [io  0x1820-0x183f]
[    0.033186] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
[    0.033231] pci 0000:00:1d.2: reg 20: [io  0x1840-0x185f]
[    0.033276] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
[    0.033300] pci 0000:00:1d.7: reg 10: [mem 0xd0000000-0xd00003ff]
[    0.033380] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.033386] pci 0000:00:1d.7: PME# disabled
[    0.033405] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.033451] pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601
[    0.033519] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[    0.033579] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH4 GPIO
[    0.033641] pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101
[    0.033656] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.033667] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.033678] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.033689] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.033700] pci 0000:00:1f.1: reg 20: [io  0x1860-0x186f]
[    0.033712] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[    0.033741] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05
[    0.033786] pci 0000:00:1f.3: reg 20: [io  0x1880-0x189f]
[    0.033824] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401
[    0.033840] pci 0000:00:1f.5: reg 10: [io  0x1c00-0x1cff]
[    0.033851] pci 0000:00:1f.5: reg 14: [io  0x18c0-0x18ff]
[    0.033861] pci 0000:00:1f.5: reg 18: [mem 0xd0000c00-0xd0000dff]
[    0.033872] pci 0000:00:1f.5: reg 1c: [mem 0xd0000800-0xd00008ff]
[    0.033911] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.033916] pci 0000:00:1f.5: PME# disabled
[    0.033935] pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703
[    0.033952] pci 0000:00:1f.6: reg 10: [io  0x2400-0x24ff]
[    0.033963] pci 0000:00:1f.6: reg 14: [io  0x2000-0x207f]
[    0.034023] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.034029] pci 0000:00:1f.6: PME# disabled
[    0.034055] pci 0000:01:00.0: [1002:4e50] type 0 class 0x000300
[    0.034071] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
[    0.034080] pci 0000:01:00.0: reg 14: [io  0x3000-0x30ff]
[    0.034089] pci 0000:01:00.0: reg 18: [mem 0xd0100000-0xd010ffff]
[    0.034114] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.034135] pci 0000:01:00.0: supports D1 D2
[    0.034169] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.034218] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.034223] pci 0000:00:01.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.034228] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff pref]
[    0.034255] pci 0000:02:02.0: [14e4:4401] type 0 class 0x000200
[    0.034272] pci 0000:02:02.0: reg 10: [mem 0xd0214000-0xd0215fff]
[    0.034330] pci 0000:02:02.0: supports D1 D2
[    0.034334] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.034339] pci 0000:02:02.0: PME# disabled
[    0.034358] pci 0000:02:04.0: [168c:001b] type 0 class 0x000200
[    0.034376] pci 0000:02:04.0: reg 10: [mem 0xd0200000-0xd020ffff]
[    0.034456] pci 0000:02:06.0: [104c:ac44] type 2 class 0x000607
[    0.034474] pci 0000:02:06.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.034494] pci 0000:02:06.0: supports D1 D2
[    0.034497] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot
[    0.034502] pci 0000:02:06.0: PME# disabled
[    0.034521] pci 0000:02:06.1: [104c:8029] type 0 class 0x000c00
[    0.034539] pci 0000:02:06.1: reg 10: [mem 0xd0216000-0xd02167ff]
[    0.034550] pci 0000:02:06.1: reg 14: [mem 0xd0210000-0xd0213fff]
[    0.034606] pci 0000:02:06.1: supports D1 D2
[    0.034609] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot
[    0.034615] pci 0000:02:06.1: PME# disabled
[    0.034657] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.034711] pci 0000:00:1e.0:   bridge window [mem 0xd0200000-0xd02fffff]
[    0.034717] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.034722] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.034760] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02]
[    0.034829] pci_bus 0000:00: on NUMA node 0
[    0.034834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.034964] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[    0.035023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.035167]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.037895] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10)
[    0.038143] ACPI: PCI Interrupt Link [LNKB] (IRQs 7 11) *5
[    0.038407] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 *11)
[    0.038638] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 10) *3
[    0.038900] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 *11)
[    0.039128] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 11) *0, disabled.
[    0.039424] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 10) *0, disabled.
[    0.039719] ACPI: PCI Interrupt Link [LNKH] (IRQs 6) *10
[    0.040081] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.040140] vgaarb: loaded
[    0.040184] vgaarb: bridge control possible 0000:01:00.0
[    0.040430] SCSI subsystem initialized
[    0.040557] usbcore: registered new interface driver usbfs
[    0.040644] usbcore: registered new interface driver hub
[    0.040737] usbcore: registered new device driver usb
[    0.041063] PCI: Using ACPI for IRQ routing
[    0.041111] PCI: pci_cache_line_size set to 64 bytes
[    0.041174] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.041178] reserve RAM buffer: 000000005ff70000 - 000000005fffffff 
[    0.041428] Switching to clocksource pit
[    0.045277] pnp: PnP ACPI init
[    0.045326] ACPI: bus type pnp registered
[    0.045893] pnp 00:00: [bus 00-ff]
[    0.045898] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.045902] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.045905] pnp 00:00: [io  0x0d00-0xffff window]
[    0.045909] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.045913] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.045917] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.045921] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.045924] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.045928] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.045932] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.045936] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.045939] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.045943] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.045947] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.045951] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.045955] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.045958] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.045962] pnp 00:00: [mem 0x60000000-0xfebfffff window]
[    0.045966] pnp 00:00: [mem 0x00000000 window]
[    0.046074] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.046281] pnp 00:01: [io  0x0070-0x0077]
[    0.046287] pnp 00:01: [irq 8]
[    0.046352] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.046366] pnp 00:02: [io  0x00f0]
[    0.046370] pnp 00:02: [irq 13]
[    0.046433] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.046449] pnp 00:03: [io  0x0000-0x001f]
[    0.046452] pnp 00:03: [io  0x0081-0x008f]
[    0.046455] pnp 00:03: [io  0x0090-0x0091]
[    0.046458] pnp 00:03: [io  0x0093-0x009f]
[    0.046461] pnp 00:03: [io  0x00c0-0x00df]
[    0.046465] pnp 00:03: [dma 4]
[    0.046564] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.046583] pnp 00:04: [io  0x002e-0x002f]
[    0.046586] pnp 00:04: [io  0x004e-0x004f]
[    0.046589] pnp 00:04: [io  0x0061]
[    0.046592] pnp 00:04: [io  0x0063]
[    0.046595] pnp 00:04: [io  0x0065]
[    0.046598] pnp 00:04: [io  0x0067]
[    0.046601] pnp 00:04: [io  0x0080]
[    0.046604] pnp 00:04: [io  0x0092]
[    0.046607] pnp 00:04: [io  0x00b2-0x00b3]
[    0.046610] pnp 00:04: [io  0x0600-0x060f]
[    0.046613] pnp 00:04: [io  0x0700-0x070f]
[    0.046616] pnp 00:04: [io  0x0800-0x0807]
[    0.046620] pnp 00:04: [io  0x1000-0x107f]
[    0.046623] pnp 00:04: [io  0x1180-0x11bf]
[    0.046626] pnp 00:04: [io  0x0068-0x006f]
[    0.046629] pnp 00:04: [io  0xfe00-0xfefe]
[    0.046632] pnp 00:04: [mem 0xfebfe000-0xfebfefff]
[    0.046636] pnp 00:04: [mem 0xfebff000-0xfebfffff]
[    0.046639] pnp 00:04: [mem 0xfec00000-0xfec00fff]
[    0.046743] system 00:04: [io  0x0600-0x060f] has been reserved
[    0.046793] system 00:04: [io  0x0700-0x070f] has been reserved
[    0.046841] system 00:04: [io  0x0800-0x0807] has been reserved
[    0.046890] system 00:04: [io  0x1000-0x107f] has been reserved
[    0.046938] system 00:04: [io  0x1180-0x11bf] has been reserved
[    0.046987] system 00:04: [io  0xfe00-0xfefe] has been reserved
[    0.047036] system 00:04: [mem 0xfebfe000-0xfebfefff] has been reserved
[    0.047085] system 00:04: [mem 0xfebff000-0xfebfffff] has been reserved
[    0.047134] system 00:04: [mem 0xfec00000-0xfec00fff] has been reserved
[    0.047183] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.047718] pnp 00:05: [io  0x0378-0x037f]
[    0.047722] pnp 00:05: [io  0x0778-0x077f]
[    0.047725] pnp 00:05: [irq 7]
[    0.047728] pnp 00:05: [dma 1]
[    0.047902] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.048464] pnp 00:06: [io  0x03f8-0x03ff]
[    0.048468] pnp 00:06: [irq 4]
[    0.048628] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.049010] pnp 00:07: [io  0x0060]
[    0.049013] pnp 00:07: [io  0x0064]
[    0.049017] pnp 00:07: [irq 1]
[    0.049085] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.049100] pnp 00:08: [irq 12]
[    0.049165] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.049200] pnp: PnP ACPI: found 9 devices
[    0.049245] ACPI: ACPI bus type pnp unregistered
[    0.083870] Switching to clocksource acpi_pm
[    0.083937] PCI: max bus depth: 2 pci_try_num: 3
[    0.083960] pci 0000:00:1f.1: BAR 5: assigned [mem 0x60000000-0x600003ff]
[    0.084012] pci 0000:00:1f.1: BAR 5: set to [mem 0x60000000-0x600003ff] (PCI address [0x60000000-0x600003ff])
[    0.084073] pci 0000:00:1e.0: BAR 9: assigned [mem 0x64000000-0x67ffffff pref]
[    0.084132] pci 0000:00:1e.0: BAR 7: assigned [io  0x4000-0x4fff]
[    0.084182] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
[    0.084238] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.084286] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.084336] pci 0000:00:01.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.084386] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff pref]
[    0.084447] pci 0000:02:06.0: BAR 0: assigned [mem 0x68000000-0x68000fff]
[    0.084499] pci 0000:02:06.0: BAR 0: set to [mem 0x68000000-0x68000fff] (PCI address [0x68000000-0x68000fff])
[    0.084578] Switched to NOHz mode on CPU #0
[    0.084640] pci 0000:02:06.0: BAR 10: assigned [mem 0x6c000000-0x6fffffff]
[    0.084690] pci 0000:02:06.0: BAR 9: assigned [mem 0x64000000-0x67ffffff pref]
[    0.084747] pci 0000:02:06.0: BAR 8: assigned [io  0x4000-0x40ff]
[    0.084795] pci 0000:02:06.0: BAR 7: assigned [io  0x4400-0x44ff]
[    0.084844] pci 0000:02:06.0: CardBus bridge to [bus 03-06]
[    0.084891] pci 0000:02:06.0:   bridge window [io  0x4400-0x44ff]
[    0.084941] pci 0000:02:06.0:   bridge window [io  0x4000-0x40ff]
[    0.084991] pci 0000:02:06.0:   bridge window [mem 0x64000000-0x67ffffff pref]
[    0.085066] pci 0000:02:06.0:   bridge window [mem 0x6c000000-0x6fffffff]
[    0.085117] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.087861] pci 0000:00:1e.0:   bridge window [io  0x4000-0x4fff]
[    0.087913] pci 0000:00:1e.0:   bridge window [mem 0xd0200000-0xd02fffff]
[    0.087963] pci 0000:00:1e.0:   bridge window [mem 0x64000000-0x67ffffff pref]
[    0.088050] pci 0000:00:1e.0: setting latency timer to 64
[    0.088058] pci 0000:02:06.0: enabling device (0000 -> 0003)
[    0.088204] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    0.088251] PCI: setting IRQ 11 as level-triggered
[    0.088258] pci 0000:02:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[    0.088318] pci 0000:02:06.0: setting latency timer to 64
[    0.088323] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.088327] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.088331] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.088335] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff]
[    0.088339] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff pref]
[    0.088343] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.088347] pci_bus 0000:02: resource 1 [mem 0xd0200000-0xd02fffff]
[    0.088351] pci_bus 0000:02: resource 2 [mem 0x64000000-0x67ffffff pref]
[    0.088355] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.088358] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.088362] pci_bus 0000:03: resource 0 [io  0x4400-0x44ff]
[    0.088366] pci_bus 0000:03: resource 1 [io  0x4000-0x40ff]
[    0.088370] pci_bus 0000:03: resource 2 [mem 0x64000000-0x67ffffff pref]
[    0.088374] pci_bus 0000:03: resource 3 [mem 0x6c000000-0x6fffffff]
[    0.088410] NET: Registered protocol family 2
[    0.088527] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.088767] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.090376] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.091461] TCP: Hash tables configured (established 131072 bind 65536)
[    0.091513] TCP reno registered
[    0.091564] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.091646] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.091901] NET: Registered protocol family 1
[    0.092108] pci 0000:01:00.0: Boot video device
[    0.092123] PCI: CLS 32 bytes, default 64
[    0.092205] Trying to unpack rootfs image as initramfs...
[    0.428574] Freeing initrd memory: 9636k freed
[    0.444388] Simple Boot Flag at 0x37 set to 0x1
[    0.445293] audit: initializing netlink socket (disabled)
[    0.445363] type=2000 audit(1327501884.444:1): initialized
[    0.455775] highmem bounce pool size: 64 pages
[    0.455900] VFS: Disk quotas dquot_6.5.2
[    0.456001] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.456266] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.456357] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.464607] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.464972] SGI XFS Quota Management subsystem
[    0.465091] msgmni has been set to 1729
[    0.465503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.465563] io scheduler noop registered
[    0.465608] io scheduler deadline registered (default)
[    0.466112] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.486652] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.507597] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.507810] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[    0.507894] serial 0000:00:1f.6: PCI INT B disabled
[    0.508039] toshiba: not a supported Toshiba laptop
[    0.508129] intel_rng: FWH not detected
[    0.508195] Linux agpgart interface v0.103
[    0.508402] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[    0.523471] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    0.523855] [drm] Initialized drm 1.1.0 20060810
[    0.523941] [drm] VGACON disable radeon kernel modesetting.
[    0.524114] pci 0000:01:00.0: power state changed by ACPI to D0
[    0.524164] pci 0000:01:00.0: power state changed by ACPI to D0
[    0.524356] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.524404] PCI: setting IRQ 10 as level-triggered
[    0.524411] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[    0.524943] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    0.524997] [drm] No driver support for vblank timestamp query.
[    0.525117] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[    0.528205] brd: module loaded
[    0.529503] loop: module loaded
[    0.529700] I2O subsystem v1.325
[    0.529745] i2o: max drivers = 8
[    0.530117] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.531458] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.531510] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.531799] mousedev: PS/2 mouse device common for all mice
[    0.531995] rtc_cmos 00:01: RTC can wake from S4
[    0.532177] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.532240] rtc0: alarms up to one month, y3k, 242 bytes nvram
[    0.532325] cpuidle: using governor ladder
[    0.532372] cpuidle: using governor menu
[    0.532578] TCP cubic registered
[    0.532625] NET: Registered protocol family 17
[    0.532676] Using IPI No-Shortcut mode
[    0.532861] registered taskstats version 1
[    0.533197] rtc_cmos 00:01: setting system clock to 2012-01-25 14:31:25 UTC (1327501885)
[    0.533353] Freeing unused kernel memory: 360k freed
[    0.559223] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.798747] libata version 3.00 loaded.
[    1.175957] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006/0x0
[    1.206921] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[    1.446039] Refined TSC clocksource calibration: 1493.933 MHz.
[    1.446047] Switching to clocksource tsc
[    2.320172] ata_piix 0000:00:1f.1: version 2.13
[    2.320348] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    2.320355] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    2.320410] ata_piix 0000:00:1f.1: setting latency timer to 64
[    2.322329] scsi0 : ata_piix
[    2.322782] scsi1 : ata_piix
[    2.323843] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[    2.323848] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[    2.477539] ata1.00: ATA-6: HTS548060M9AT00, MG3OA53A, max UDMA/100
[    2.477544] ata1.00: 117210240 sectors, multi 16: LBA48 
[    2.478291] ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW242C, UQ81, max UDMA/33
[    2.483406] ata1.00: configured for UDMA/100
[    2.483542] scsi 0:0:0:0: Direct-Access     ATA      HTS548060M9AT00  MG3O PQ: 0 ANSI: 5
[    2.484174] ata2.00: configured for UDMA/33
[    2.484337] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    2.484420] sd 0:0:0:0: [sda] Write Protect is off
[    2.484424] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.484449] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.485908] scsi 1:0:0:0: CD-ROM            QSI      CDRW/DVD SBW242C UQ81 PQ: 0 ANSI: 5
[    2.487680] sr0: scsi3-mmc drive: 4x/4x writer cd/rw xa/form2 cdda tray
[    2.487685] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.487988] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.839969]  sda: sda1 sda2 < >
[    2.840695] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.991298] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.991565] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.297064] scsi: <fdomain> Detection failed (no card)
[    3.334685] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    3.671951] Fusion MPT base driver 3.04.19
[    3.671955] Copyright (c) 1999-2008 LSI Corporation
[    3.758592] Fusion MPT SPI Host driver 3.04.19
[    3.838232] Fusion MPT FC Host driver 3.04.19
[    3.901148] Fusion MPT SAS Host driver 3.04.19
[    3.942700] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    3.984514] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    4.026498] Compaq SMART2 Driver (v 2.6.0)
[    4.069117] HP CISS Driver (v 3.6.26)
[    4.243511] Adaptec aacraid driver 1.1-7[28000]-ms
[    4.346369] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    4.347843] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    4.436247] megasas: 00.00.05.40-rc1 Tue. Jul. 26 17:00:00 PDT 2011
[    4.488632] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.07-k.
[    4.545212] Emulex LightPulse Fibre Channel SCSI driver 8.3.25
[    4.545217] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    4.662718] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    4.710305] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.710515] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 6
[    4.710520] PCI: setting IRQ 6 as level-triggered
[    4.710528] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 6 (level, low) -> IRQ 6
[    4.710549] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    4.710554] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.710564] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    4.710595] ehci_hcd 0000:00:1d.7: debug port 1
[    4.714467] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    4.714642] ehci_hcd 0000:00:1d.7: irq 6, io mem 0xd0000000
[    4.724021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.724451] hub 1-0:1.0: USB hub found
[    4.724458] hub 1-0:1.0: 6 ports detected
[    4.782199] Initializing USB Mass Storage driver...
[    4.782423] usbcore: registered new interface driver usb-storage
[    4.782426] USB Mass Storage support registered.
[    4.829212] uhci_hcd: USB Universal Host Controller Interface driver
[    4.829301] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[    4.829314] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.829319] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.829327] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    4.829356] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
[    4.829938] hub 2-0:1.0: USB hub found
[    4.829944] hub 2-0:1.0: 2 ports detected
[    4.830157] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[    4.830163] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[    4.830171] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    4.830175] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.830183] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    4.830205] uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001820
[    4.830724] hub 3-0:1.0: USB hub found
[    4.830730] hub 3-0:1.0: 2 ports detected
[    4.830774] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    4.830782] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    4.830786] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.830793] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    4.830817] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[    4.831349] hub 4-0:1.0: USB hub found
[    4.831355] hub 4-0:1.0: 2 ports detected
[    4.921907] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.971204] usbcore: registered new interface driver usbhid
[    4.971208] usbhid: USB HID core driver
[    5.019670] sl811: driver sl811-hcd, 19 May 2005
[    5.133039] usb 4-1: new full speed USB device number 2 using uhci_hcd
[    5.303178] scsi2 : usb-storage 4-1:1.0
[    5.725546] device-mapper: uevent: version 1.0.3
[    5.725822] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: [e-mail]
[    6.179165] md: raid0 personality registered for level 0
[    6.233255] md: raid1 personality registered for level 1
[    6.312652] scsi 2:0:0:0: Direct-Access     Generic  Flash R/W        2002 PQ: 0 ANSI: 2
[    6.319644] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    6.345065] raid6: int32x1    519 MB/s
[    6.362090] raid6: int32x2    605 MB/s
[    6.379063] raid6: int32x4    566 MB/s
[    6.396115] raid6: int32x8    425 MB/s
[    6.413025] raid6: mmxx1     1535 MB/s
[    6.430039] raid6: mmxx2     1785 MB/s
[    6.447056] raid6: sse1x1    1148 MB/s
[    6.464030] raid6: sse1x2    1718 MB/s
[    6.481037] raid6: sse2x1    1980 MB/s
[    6.498030] raid6: sse2x2    2226 MB/s
[    6.498033] raid6: using algorithm sse2x2 (2226 MB/s)
[    6.500593] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    6.533362] async_tx: api initialized (async)
[    6.549102] xor: automatically using best checksumming function: pIII_sse
[    6.554018]    pIII_sse  :  3932.000 MB/sec
[    6.554021] xor: using function: pIII_sse (3932.000 MB/sec)
[    6.605137] md: raid6 personality registered for level 6
[    6.605140] md: raid5 personality registered for level 5
[    6.605143] md: raid4 personality registered for level 4
[    6.668539] md: raid10 personality registered for level 10
[    6.795957] Btrfs loaded
[    6.903148] RPC: Registered named UNIX socket transport module.
[    6.903153] RPC: Registered udp transport module.
[    6.903155] RPC: Registered tcp transport module.
[    6.903158] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    6.975789] fuse init (API version 7.17)
[    7.035776] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    7.035780] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    7.175763] Loading iSCSI transport class v2.0-870.
[    7.327510] iscsi: registered transport (tcp)
[   19.233742] ISO 9660 Extensions: Microsoft Joliet Level 3
[   19.234723] ISO 9660 Extensions: RRIP_1991A
[   19.258762] aufs 3.1-20111114
[   19.793662] aufs test_add:262:mount[15362]: uid/gid/perm /mnt/static 0/0/0755, 0/0/01777
[   32.846404] udevd[15817]: starting version 171
[   38.562486] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[   39.059610] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   39.064876] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   39.711836] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[   39.713241] ACPI: Lid Switch [LID]
[   39.713311] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   39.713344] ACPI: Power Button [PWRB]
[   39.713406] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[   39.713431] ACPI: Sleep Button [SLPB]
[   39.713514] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   39.713538] ACPI: Power Button [PWRF]
[   40.639552] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   40.731398] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input7
[   40.731499] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   42.040943] b44 0000:02:02.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[   42.049742] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243)
[   42.049750] ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[   42.049757] ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243)
[   42.068163] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[   42.068442] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[   42.076517] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:c0:9f:41:e3:ea
[   42.432248] yenta_cardbus 0000:02:06.0: CardBus bridge found [152d:6601]
[   42.432266] yenta_cardbus 0000:02:06.0: Using CSCINT to route CSC interrupts to PCI
[   42.432270] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[   42.432276] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01771b22, devctl 0x44
[   42.655514] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x00b8, PCI irq 11
[   42.655519] yenta_cardbus 0000:02:06.0: Socket status: 30000086
[   42.655524] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[   42.655535] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io  0x4000-0x4fff]
[   42.655540] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xd02fffff]
[   42.655546] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xd02fffff: excluding 0xd0200000-0xd021ffff
[   42.655565] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x64000000-0x67ffffff pref]
[   42.655569] pcmcia_socket pcmcia_socket0: cs: memory probe 0x64000000-0x67ffffff: excluding 0x64000000-0x67ffffff
[   43.003308] snd_intel8x0 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[   43.003347] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[   43.018800] cfg80211: Calling CRDA to update world regulatory domain
[   43.816038] intel8x0_measure_ac97_clock: measured 50469 usecs (2433 samples)
[   43.816042] intel8x0: clocking to 48000
[   43.816681] snd_intel8x0m 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[   43.816704] snd_intel8x0m 0000:00:1f.6: setting latency timer to 64
[   47.228659] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[   47.228669] ath5k 0000:02:04.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[   47.228773] ath5k 0000:02:04.0: registered as 'phy0'
[   47.903353] ath: EEPROM regdomain: 0x37
[   47.903357] ath: EEPROM indicates we should expect a direct regpair map
[   47.903362] ath: Country alpha2 being used: AW
[   47.903364] ath: Regpair used: 0x37
[   48.327269] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   48.329394] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa5, PHY: 0x61)
[   66.162245] warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
[   91.712969] NET: Registered protocol family 10
[   93.091845] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[   93.091864] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[   93.091903] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[   93.490827] [drm] Setting GART location based on new memory map
[   93.493253] [drm] Loading R300 Microcode
[   93.493380] [drm] Num pipes: 1
[   93.493391] [drm] writeback test succeeded in 2 usecs
[  123.161288] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  124.036719] [drm] Num pipes: 1
[  125.412217] mtrr: no MTRR for d8000000,4000000 found
[  129.038675] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  132.706177] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[  132.706182] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[  132.706446] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  134.216180] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  134.420786] b44 ssb0:0: eth0: powering down PHY
[  134.429967] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  134.440576] b44 ssb0:0: eth0: powering down PHY
[  134.454339] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  137.706177] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[  137.706182] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[  137.706452] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  148.154024] eth0: no IPv6 routers present