dmesg when booted with "nofb"

added_nofb.txt (text/plain), 30.71 KB, created by Martin Mokrejš on 2012-01-25 09:55:29 UTC

root=/dev/ram0 init=/linuxrc dokeymap aufs looptype=squashfs loop=/image.squashfs cdroot initrd=/boot/gentoo.igz vga=791 splash=silent,theme:livecd-10 console=tty1 quiet nofb BOOT_IMAGE=/boot/gentoo 
led.
[    0.035470] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 10) *0, disabled.
[    0.035530] ACPI: PCI Interrupt Link [LNKH] (IRQs 6) *10
[    0.035672] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.035678] vgaarb: loaded
[    0.035680] vgaarb: bridge control possible 0000:01:00.0
[    0.035877] SCSI subsystem initialized
[    0.035960] usbcore: registered new interface driver usbfs
[    0.036029] usbcore: registered new interface driver hub
[    0.036077] usbcore: registered new device driver usb
[    0.036341] PCI: Using ACPI for IRQ routing
[    0.036345] PCI: pci_cache_line_size set to 64 bytes
[    0.036407] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.036411] reserve RAM buffer: 000000001ff70000 - 000000001fffffff 
[    0.036647] Switching to clocksource pit
[    0.040269] pnp: PnP ACPI init
[    0.040276] ACPI: bus type pnp registered
[    0.040777] pnp 00:00: [bus 00-ff]
[    0.040781] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.040785] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.040788] pnp 00:00: [io  0x0d00-0xffff window]
[    0.040792] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.040796] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.040800] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.040804] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.040807] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.040811] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.040815] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.040819] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.040822] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.040826] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.040830] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.040834] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.040838] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.040841] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.040845] pnp 00:00: [mem 0x20000000-0xfebfffff window]
[    0.040849] pnp 00:00: [mem 0x00000000 window]
[    0.040922] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.041127] pnp 00:01: [io  0x0070-0x0077]
[    0.041133] pnp 00:01: [irq 8]
[    0.041197] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.041211] pnp 00:02: [io  0x00f0]
[    0.041215] pnp 00:02: [irq 13]
[    0.041278] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.041294] pnp 00:03: [io  0x0000-0x001f]
[    0.041297] pnp 00:03: [io  0x0081-0x008f]
[    0.041300] pnp 00:03: [io  0x0090-0x0091]
[    0.041304] pnp 00:03: [io  0x0093-0x009f]
[    0.041307] pnp 00:03: [io  0x00c0-0x00df]
[    0.041310] pnp 00:03: [dma 4]
[    0.041425] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.041445] pnp 00:04: [io  0x002e-0x002f]
[    0.041448] pnp 00:04: [io  0x004e-0x004f]
[    0.041451] pnp 00:04: [io  0x0061]
[    0.041454] pnp 00:04: [io  0x0063]
[    0.041457] pnp 00:04: [io  0x0065]
[    0.041460] pnp 00:04: [io  0x0067]
[    0.041463] pnp 00:04: [io  0x0080]
[    0.041466] pnp 00:04: [io  0x0092]
[    0.041469] pnp 00:04: [io  0x00b2-0x00b3]
[    0.041472] pnp 00:04: [io  0x0600-0x060f]
[    0.041475] pnp 00:04: [io  0x0700-0x070f]
[    0.041478] pnp 00:04: [io  0x0800-0x0807]
[    0.041482] pnp 00:04: [io  0x1000-0x107f]
[    0.041485] pnp 00:04: [io  0x1180-0x11bf]
[    0.041488] pnp 00:04: [io  0x0068-0x006f]
[    0.041491] pnp 00:04: [io  0xfe00-0xfefe]
[    0.041495] pnp 00:04: [mem 0xfebfe000-0xfebfefff]
[    0.041498] pnp 00:04: [mem 0xfebff000-0xfebfffff]
[    0.041501] pnp 00:04: [mem 0xfec00000-0xfec00fff]
[    0.041604] system 00:04: [io  0x0600-0x060f] has been reserved
[    0.041608] system 00:04: [io  0x0700-0x070f] has been reserved
[    0.041613] system 00:04: [io  0x0800-0x0807] has been reserved
[    0.041617] system 00:04: [io  0x1000-0x107f] has been reserved
[    0.041621] system 00:04: [io  0x1180-0x11bf] has been reserved
[    0.041625] system 00:04: [io  0xfe00-0xfefe] has been reserved
[    0.041630] system 00:04: [mem 0xfebfe000-0xfebfefff] has been reserved
[    0.041635] system 00:04: [mem 0xfebff000-0xfebfffff] has been reserved
[    0.041639] system 00:04: [mem 0xfec00000-0xfec00fff] has been reserved
[    0.041644] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.042144] pnp 00:05: [io  0x0378-0x037f]
[    0.042148] pnp 00:05: [io  0x0778-0x077f]
[    0.042152] pnp 00:05: [irq 7]
[    0.042155] pnp 00:05: [dma 1]
[    0.042325] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.042916] pnp 00:06: [io  0x03f8-0x03ff]
[    0.042920] pnp 00:06: [irq 4]
[    0.043052] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.043454] pnp 00:07: [io  0x0060]
[    0.043458] pnp 00:07: [io  0x0064]
[    0.043461] pnp 00:07: [irq 1]
[    0.043530] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.043545] pnp 00:08: [irq 12]
[    0.043611] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.043645] pnp: PnP ACPI: found 9 devices
[    0.043648] ACPI: ACPI bus type pnp unregistered
[    0.078228] Switching to clocksource acpi_pm
[    0.078252] PCI: max bus depth: 2 pci_try_num: 3
[    0.078272] pci 0000:00:1f.1: BAR 5: assigned [mem 0x20000000-0x200003ff]
[    0.078280] pci 0000:00:1f.1: BAR 5: set to [mem 0x20000000-0x200003ff] (PCI address [0x20000000-0x200003ff])
[    0.078286] pci 0000:00:1e.0: BAR 9: assigned [mem 0x24000000-0x27ffffff pref]
[    0.078292] pci 0000:00:1e.0: BAR 7: assigned [io  0x4000-0x4fff]
[    0.078297] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
[    0.078302] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.078306] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.078311] pci 0000:00:01.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.078316] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff pref]
[    0.078325] pci 0000:02:06.0: BAR 0: assigned [mem 0x28000000-0x28000fff]
[    0.078348] Switched to NOHz mode on CPU #0
[    0.078367] pci 0000:02:06.0: BAR 0: set to [mem 0x28000000-0x28000fff] (PCI address [0x28000000-0x28000fff])
[    0.078373] pci 0000:02:06.0: BAR 10: assigned [mem 0x2c000000-0x2fffffff]
[    0.078378] pci 0000:02:06.0: BAR 9: assigned [mem 0x24000000-0x27ffffff pref]
[    0.078382] pci 0000:02:06.0: BAR 8: assigned [io  0x4000-0x40ff]
[    0.078386] pci 0000:02:06.0: BAR 7: assigned [io  0x4400-0x44ff]
[    0.078390] pci 0000:02:06.0: CardBus bridge to [bus 03-06]
[    0.078393] pci 0000:02:06.0:   bridge window [io  0x4400-0x44ff]
[    0.078399] pci 0000:02:06.0:   bridge window [io  0x4000-0x40ff]
[    0.078405] pci 0000:02:06.0:   bridge window [mem 0x24000000-0x27ffffff pref]
[    0.078411] pci 0000:02:06.0:   bridge window [mem 0x2c000000-0x2fffffff]
[    0.078416] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.078421] pci 0000:00:1e.0:   bridge window [io  0x4000-0x4fff]
[    0.078427] pci 0000:00:1e.0:   bridge window [mem 0xd0200000-0xd02fffff]
[    0.078433] pci 0000:00:1e.0:   bridge window [mem 0x24000000-0x27ffffff pref]
[    0.078451] pci 0000:00:1e.0: setting latency timer to 64
[    0.078458] pci 0000:02:06.0: enabling device (0000 -> 0003)
[    0.078558] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    0.078562] PCI: setting IRQ 11 as level-triggered
[    0.078568] pci 0000:02:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[    0.078575] pci 0000:02:06.0: setting latency timer to 64
[    0.078581] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.078584] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.078588] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.078592] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff]
[    0.078596] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff pref]
[    0.078600] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.078604] pci_bus 0000:02: resource 1 [mem 0xd0200000-0xd02fffff]
[    0.078608] pci_bus 0000:02: resource 2 [mem 0x24000000-0x27ffffff pref]
[    0.078612] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.078615] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.078619] pci_bus 0000:03: resource 0 [io  0x4400-0x44ff]
[    0.078623] pci_bus 0000:03: resource 1 [io  0x4000-0x40ff]
[    0.078627] pci_bus 0000:03: resource 2 [mem 0x24000000-0x27ffffff pref]
[    0.078631] pci_bus 0000:03: resource 3 [mem 0x2c000000-0x2fffffff]
[    0.078664] NET: Registered protocol family 2
[    0.078733] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.078850] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.078967] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.079102] TCP: Hash tables configured (established 16384 bind 16384)
[    0.079105] TCP reno registered
[    0.079109] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.079119] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.079206] NET: Registered protocol family 1
[    0.079295] pci 0000:01:00.0: Boot video device
[    0.079309] PCI: CLS 32 bytes, default 64
[    0.079355] Trying to unpack rootfs image as initramfs...
[    0.411215] Freeing initrd memory: 9636k freed
[    0.425946] Simple Boot Flag at 0x37 set to 0x1
[    0.426719] audit: initializing netlink socket (disabled)
[    0.426739] type=2000 audit(1327486195.425:1): initialized
[    0.431160] VFS: Disk quotas dquot_6.5.2
[    0.431220] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.431414] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.431463] JFS: nTxBlock = 3974, nTxLock = 31793
[    0.434171] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.434455] SGI XFS Quota Management subsystem
[    0.434469] msgmni has been set to 993
[    0.434820] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.434825] io scheduler noop registered
[    0.434828] io scheduler deadline registered (default)
[    0.435276] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.455767] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.476665] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.476831] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[    0.476861] serial 0000:00:1f.6: PCI INT B disabled
[    0.476937] toshiba: not a supported Toshiba laptop
[    0.476981] intel_rng: FWH not detected
[    0.477032] Linux agpgart interface v0.103
[    0.477196] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[    0.491805] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    0.491978] vesafb: mode is 1024x768x16, linelength=2048, pages=41
[    0.491982] vesafb: protected mode interface info at c000:5678
[    0.491986] vesafb: pmi: set display start = c00c56e6, set palette = c00c5720
[    0.491988] vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4 
[    0.491998] vesafb: scrolling: redraw
[    0.492002] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.492249] vesafb: framebuffer at 0xd8000000, mapped to 0xe0a00000, using 3072k, total 65536k
[    0.522915] Console: switching to colour frame buffer device 128x48
[    0.550651] fb0: VESA VGA frame buffer device
[    0.558044] [drm] Initialized drm 1.1.0 20060810
[    0.558088] [drm] radeon defaulting to kernel modesetting.
[    0.558091] [drm] radeon kernel modesetting enabled.
[    0.558135] checking generic (d8000000 4000000) vs hw (d8000000 8000000)
[    0.558139] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[    0.558153] Console: switching to colour dummy device 80x25
[    0.562044] radeon 0000:01:00.0: power state changed by ACPI to D0
[    0.562050] radeon 0000:01:00.0: power state changed by ACPI to D0
[    0.562194] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.562198] PCI: setting IRQ 10 as level-triggered
[    0.562205] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[    0.562918] [drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x152D:0x6601).
[    0.562939] [drm] register mmio base: 0xD0100000
[    0.562941] [drm] register mmio size: 65536
[    0.567722] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[    0.571036] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[    0.571075] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[    0.571101] radeon 0000:01:00.0: GTT: 256M 0xE0000000 - 0xEFFFFFFF
[    0.571107] [drm] Generation 2 PCI interface, using max accessible memory
[    0.571114] radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (64M used)
[    0.571120] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    0.571123] [drm] Driver supports precise vblank timestamp query.
[    0.571135] [drm] radeon: irq initialized.
[    0.571466] [drm] Detected VRAM RAM=128M, BAR=128M
[    0.571470] [drm] RAM width 128bits DDR
[    0.575042] [TTM] Zone  kernel: Available graphics memory: 254344 kiB.
[    0.575046] [TTM] Initializing pool allocator.
[    0.575081] [drm] radeon: 64M of VRAM memory ready
[    0.575086] [drm] radeon: 256M of GTT memory ready.
[    0.575107] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[    0.576156] radeon 0000:01:00.0: WB disabled
[    0.576278] [drm] Loading R300 Microcode
[    0.576593] [drm] radeon: ring at 0x00000000E0001000
[    0.576616] [drm] ring test succeeded in 1 usecs
[    0.576828] [drm] radeon: ib pool ready.
[    0.576847] [drm] ib test succeeded in 0 usecs
[    0.588036] [drm] Panel ID String: CPT                     
[    0.588040] [drm] Panel Size 1400x1050
[    0.613083] [drm] radeon legacy LVDS backlight initialized
[    0.633078] [drm] Radeon Display Connectors
[    0.633080] [drm] Connector 0:
[    0.633083] [drm]   VGA
[    0.633086] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    0.633089] [drm]   Encoders:
[    0.633091] [drm]     CRT1: INTERNAL_DAC1
[    0.633094] [drm] Connector 1:
[    0.633096] [drm]   LVDS
[    0.633097] [drm]   Encoders:
[    0.633099] [drm]     LCD1: INTERNAL_LVDS
[    0.633102] [drm] Connector 2:
[    0.633104] [drm]   S-video
[    0.633105] [drm]   Encoders:
[    0.633107] [drm]     TV1: INTERNAL_DAC2
[    0.652514] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID
[    0.652530] [drm] radeon: power management initialized
[    0.798194] BUG: unable to handle kernel NULL pointer dereference at 00000e34
[    0.798211] IP: [<c1227df1>] fbcon_decor_ioctl+0x369/0x639
[    0.798225] *pde = 00000000 
[    0.798231] Oops: 0000 [#1] SMP 
[    0.798237] Modules linked in:
[    0.798241] 
[    0.798246] Pid: 377, comm: fbcondecor_help Not tainted 3.1.5-gentoo #1 ATComputers  / 
[    0.798256] EIP: 0060:[<c1227df1>] EFLAGS: 00010206 CPU: 0
[    0.798262] EIP is at fbcon_decor_ioctl+0x369/0x639
[    0.798268] EAX: 00000e00 EBX: de805600 ECX: 00000400 EDX: 080b02a0
[    0.798273] ESI: ffffffea EDI: 00000000 EBP: bf921598 ESP: dd375ee4
[    0.798279]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    0.798285] Process fbcondecor_help (pid: 377, ti=dd374000 task=de8cc1c0 task.ti=dd374000)
[    0.798291] Stack:
[    0.798294]  de847000 ffff0000 00000000 04000060 080b02a0 b778a010 de814b00 de458818
[    0.798306]  4adb5513 0000000a de847005 00000000 de401798 de45e928 00000101 00000004
[    0.798320]  dd7611c0 ffffffea c1227a88 de45e928 c1096925 de45e928 dd7611c8 de87aac0
[    0.798333] Call Trace:
[    0.798342]  [<c1227a88>] ? fbcon_decor_disable+0xb8/0xb8
[    0.798352]  [<c1096925>] ? do_vfs_ioctl+0x485/0x4be
[    0.798364]  [<c1089417>] ? fd_install+0x1b/0x37
[    0.798371]  [<c108a343>] ? do_sys_open+0x16b/0x175
[    0.798378]  [<c109698b>] ? sys_ioctl+0x2d/0x46
[    0.798388]  [<c13cc535>] ? syscall_call+0x7/0xb
[    0.798399]  [<c1030000>] ? ptrace_request+0xb3/0x551
[    0.798404] Code: 0f 84 eb 02 00 00 66 8b 4c 24 0e 66 85 c9 0f 84 dd 02 00 00 8b 54 24 10 66 85 d2 0f 84 d0 02 00 00 0f b7 7c 24 0a 0f b7 c9 01 f9 <3b> 48 34 0f 87 bd 02 00 00 0f b7 4c 24 0c 0f b7 d2 01 ca 3b 50 
[    0.798460] EIP: [<c1227df1>] fbcon_decor_ioctl+0x369/0x639 SS:ESP 0068:dd375ee4
[    0.798472] CR2: 0000000000000e34
[    0.798489] ---[ end trace b249d7d51e1583c0 ]---
[    0.799094] [drm] fb mappable at 0xD8040000
[    0.799101] [drm] vram apper at 0xD8000000
[    0.799106] [drm] size 5914624
[    0.799111] [drm] fb depth is 24
[    0.799115] [drm]    pitch is 5632
[    0.799275] fbcon: radeondrmfb (fb0) is primary device
[    0.895556] Console: switching to colour frame buffer device 175x65
[    0.927956] fb0: radeondrmfb frame buffer device
[    0.928140] drm: registered panic notifier
[    0.928295] [drm] Initialized radeon 2.11.0 20080528 for 0000:01:00.0 on minor 0
[    0.931212] brd: module loaded
[    0.932659] loop: module loaded
[    0.932945] I2O subsystem v1.325
[    0.933092] i2o: max drivers = 8
[    0.933483] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.935044] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.935230] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.935659] mousedev: PS/2 mouse device common for all mice
[    0.936039] rtc_cmos 00:01: RTC can wake from S4
[    0.936324] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.936557] rtc0: alarms up to one month, y3k, 242 bytes nvram
[    0.936806] cpuidle: using governor ladder
[    0.936955] cpuidle: using governor menu
[    0.937310] TCP cubic registered
[    0.937432] NET: Registered protocol family 17
[    0.937600] Using IPI No-Shortcut mode
[    0.937878] registered taskstats version 1
[    0.938334] rtc_cmos 00:01: setting system clock to 2012-01-25 10:09:56 UTC (1327486196)
[    0.938738] Freeing unused kernel memory: 360k freed
[    0.967064] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.428038] Refined TSC clocksource calibration: 1493.933 MHz.
[    1.428046] Switching to clocksource tsc
[    1.547910] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006/0x0
[    1.580439] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[    1.586590] libata version 3.00 loaded.
[    3.078073] ata_piix 0000:00:1f.1: version 2.13
[    3.078245] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    3.078252] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    3.078302] ata_piix 0000:00:1f.1: setting latency timer to 64
[    3.080193] scsi0 : ata_piix
[    3.080631] scsi1 : ata_piix
[    3.081694] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[    3.081699] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[    3.235536] ata1.00: ATA-6: HTS548060M9AT00, MG3OA53A, max UDMA/100
[    3.235541] ata1.00: 117210240 sectors, multi 16: LBA48 
[    3.236291] ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW242C, UQ81, max UDMA/33
[    3.241406] ata1.00: configured for UDMA/100
[    3.241538] scsi 0:0:0:0: Direct-Access     ATA      HTS548060M9AT00  MG3O PQ: 0 ANSI: 5
[    3.242174] ata2.00: configured for UDMA/33
[    3.242322] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    3.242404] sd 0:0:0:0: [sda] Write Protect is off
[    3.242408] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.242434] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.243875] scsi 1:0:0:0: CD-ROM            QSI      CDRW/DVD SBW242C UQ81 PQ: 0 ANSI: 5
[    3.245648] sr0: scsi3-mmc drive: 4x/4x writer cd/rw xa/form2 cdda tray
[    3.245653] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.245952] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.625574]  sda: sda1 sda2 < >
[    3.626278] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.775319] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.775579] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.078173] scsi: <fdomain> Detection failed (no card)
[    4.115388] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    4.449347] Fusion MPT base driver 3.04.19
[    4.449350] Copyright (c) 1999-2008 LSI Corporation
[    4.534710] Fusion MPT SPI Host driver 3.04.19
[    4.613726] Fusion MPT FC Host driver 3.04.19
[    4.675957] Fusion MPT SAS Host driver 3.04.19
[    4.717060] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    4.758356] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    4.799902] Compaq SMART2 Driver (v 2.6.0)
[    4.841998] HP CISS Driver (v 3.6.26)
[    5.014051] Adaptec aacraid driver 1.1-7[28000]-ms
[    5.115940] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    5.117354] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    5.204776] megasas: 00.00.05.40-rc1 Tue. Jul. 26 17:00:00 PDT 2011
[    5.256452] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.07-k.
[    5.312173] Emulex LightPulse Fibre Channel SCSI driver 8.3.25
[    5.312177] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    5.427969] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    5.474954] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.475169] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 6
[    5.475173] PCI: setting IRQ 6 as level-triggered
[    5.475181] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 6 (level, low) -> IRQ 6
[    5.475202] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    5.475207] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.475217] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    5.475248] ehci_hcd 0000:00:1d.7: debug port 1
[    5.479138] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    5.479312] ehci_hcd 0000:00:1d.7: irq 6, io mem 0xd0000000
[    5.489022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    5.489435] hub 1-0:1.0: USB hub found
[    5.489442] hub 1-0:1.0: 6 ports detected
[    5.566210] Initializing USB Mass Storage driver...
[    5.566431] usbcore: registered new interface driver usb-storage
[    5.566434] USB Mass Storage support registered.
[    5.612670] uhci_hcd: USB Universal Host Controller Interface driver
[    5.612751] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[    5.612762] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    5.612768] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.612776] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.612805] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
[    5.613391] hub 2-0:1.0: USB hub found
[    5.613398] hub 2-0:1.0: 2 ports detected
[    5.613578] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[    5.613584] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[    5.613592] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    5.613596] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.613604] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    5.613627] uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001820
[    5.614155] hub 3-0:1.0: USB hub found
[    5.614161] hub 3-0:1.0: 2 ports detected
[    5.614206] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    5.614214] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    5.614218] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.614226] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    5.614250] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[    5.614755] hub 4-0:1.0: USB hub found
[    5.614761] hub 4-0:1.0: 2 ports detected
[    5.704104] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.752791] usbcore: registered new interface driver usbhid
[    5.752795] usbhid: USB HID core driver
[    5.800247] sl811: driver sl811-hcd, 19 May 2005
[    5.916035] usb 4-1: new full speed USB device number 2 using uhci_hcd
[    6.086000] scsi2 : usb-storage 4-1:1.0
[    6.497131] device-mapper: uevent: version 1.0.3
[    6.497401] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: [e-mail]
[    6.923629] md: raid0 personality registered for level 0
[    6.977042] md: raid1 personality registered for level 1
[    7.085032] raid6: int32x1    519 MB/s
[    7.102092] raid6: int32x2    605 MB/s
[    7.119060] raid6: int32x4    566 MB/s
[    7.136119] raid6: int32x8    425 MB/s
[    7.153028] raid6: mmxx1     1535 MB/s
[    7.170038] raid6: mmxx2     1785 MB/s
[    7.187057] raid6: sse1x1    1148 MB/s
[    7.204035] raid6: sse1x2    1718 MB/s
[    7.221045] raid6: sse2x1    1980 MB/s
[    7.238028] raid6: sse2x2    2226 MB/s
[    7.238031] raid6: using algorithm sse2x2 (2226 MB/s)
[    7.270391] async_tx: api initialized (async)
[    7.286030] xor: automatically using best checksumming function: pIII_sse
[    7.291018]    pIII_sse  :  3936.000 MB/sec
[    7.291021] xor: using function: pIII_sse (3936.000 MB/sec)
[    7.321060] scsi 2:0:0:0: Direct-Access     Generic  Flash R/W        2002 PQ: 0 ANSI: 2
[    7.327705] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    7.342029] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    7.346440] md: raid6 personality registered for level 6
[    7.346444] md: raid5 personality registered for level 5
[    7.346447] md: raid4 personality registered for level 4
[    7.409806] md: raid10 personality registered for level 10
[    7.536309] Btrfs loaded
[    7.642297] RPC: Registered named UNIX socket transport module.
[    7.642302] RPC: Registered udp transport module.
[    7.642304] RPC: Registered tcp transport module.
[    7.642307] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.712783] fuse init (API version 7.17)
[    7.771831] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    7.771835] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    7.909753] Loading iSCSI transport class v2.0-870.
[    8.059832] iscsi: registered transport (tcp)
[   20.341753] ISO 9660 Extensions: Microsoft Joliet Level 3
[   20.342734] ISO 9660 Extensions: RRIP_1991A
[   20.366135] aufs 3.1-20111114
[   20.851888] aufs test_add:262:mount[15738]: uid/gid/perm /mnt/static 0/0/0755, 0/0/01777
[   34.651983] udevd[16248]: starting version 171
[   41.405932] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   42.456678] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[   42.884200] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   43.481741] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[   43.484509] ACPI: Lid Switch [LID]
[   43.484584] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[   43.484629] ACPI: Power Button [PWRB]
[   43.484687] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[   43.484712] ACPI: Sleep Button [SLPB]
[   43.484797] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   43.484822] ACPI: Power Button [PWRF]
[   44.736173] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   44.742059] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input7
[   44.742183] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   46.243938] yenta_cardbus 0000:02:06.0: CardBus bridge found [152d:6601]
[   46.243955] yenta_cardbus 0000:02:06.0: Using CSCINT to route CSC interrupts to PCI
[   46.243959] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[   46.243966] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01771b22, devctl 0x44
[   46.466554] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x00b8, PCI irq 11
[   46.466560] yenta_cardbus 0000:02:06.0: Socket status: 30000086
[   46.466566] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[   46.466579] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io  0x4000-0x4fff]
[   46.466584] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xd02fffff]
[   46.466589] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xd02fffff: excluding 0xd0200000-0xd021ffff
[   46.466608] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x24000000-0x27ffffff pref]
[   46.466613] pcmcia_socket pcmcia_socket0: cs: memory probe 0x24000000-0x27ffffff: excluding 0x24000000-0x27ffffff
[   46.468568] b44 0000:02:02.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[   46.476070] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243)
[   46.476078] ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[   46.476085] ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243)
[   46.495162] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[   46.495425] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[   46.503513] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:c0:9f:41:e3:ea
[   47.661581] snd_intel8x0 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[   47.661615] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[   48.037779] cfg80211: Calling CRDA to update world regulatory domain
[   48.492060] intel8x0_measure_ac97_clock: measured 69490 usecs (3346 samples)
[   48.492066] intel8x0: clocking to 48000
[   48.494184] snd_intel8x0m 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[   48.494210] snd_intel8x0m 0000:00:1f.6: setting latency timer to 64
[   51.180362] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[   51.180371] ath5k 0000:02:04.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[   51.180448] ath5k 0000:02:04.0: registered as 'phy0'
[   51.842941] ath: EEPROM regdomain: 0x37
[   51.842945] ath: EEPROM indicates we should expect a direct regpair map
[   51.842950] ath: Country alpha2 being used: AW
[   51.842952] ath: Regpair used: 0x37
[   51.947821] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   51.948071] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa5, PHY: 0x61)
[   69.459718] warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
[   95.644221] NET: Registered protocol family 10
[  136.085097] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  143.151489] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  146.706180] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[  146.706186] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[  146.706297] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  148.316872] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  148.497289] b44 ssb0:0: eth0: powering down PHY
[  148.505634] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  148.515988] b44 ssb0:0: eth0: powering down PHY
[  148.528675] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  150.978015] synaptics: using relaxed packet validation
[  151.706178] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[  151.706184] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[  151.706295] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  162.642022] eth0: no IPv6 routers present
[  182.022479] ata1.00: configured for UDMA/100
[  182.022486] ata1: EH complete