runscript/gamecd-runscript.sh

gamecd-runscript.sh (text/plain), 14.65 KB, created by Chris Gianelloni (RETIRED) on 2004-04-24 07:54:04 UTC

# Copyright 1999-2004 Gentoo Technologies, Inc.
# Distributed under the terms of the GNU General Public License v2
# $Header: $

# These variables are to be used for creating the menu entry and also to tell
# the CD what to execute
GAME_NAME="Unreal Tournament 2004 Demo"
GAME_SHORT_NAME="UT2004 Demo"
GAME_EXECUTABLE="/usr/games/bin/ut2004demo"

#return codes to be used by archscript

die() {
	echo "$1"
	exit 1
}

case $clst_livecd_cdfstype in
zisofs)
	cmdline_opts="looptype=zisofs loop=/zisofs"
	;;
normal)
	cmdline_opts="looptype=normal loop=/livecd.loop"
	;;
noloop)
	cmdline_opts="looptype=noloop"
	;;
squashfs)
	cmdline_opts="looptype=squashfs loop=/livecd.squashfs"
	;;
gcloop)
	cmdline_opts="looptype=gcloop loop=/livecd.gcloop"
	;;
esac

source ${clst_livecd_archscript}

create_normal_loop()
{
		#We get genkernel-built kernels and initrds in place, create the loopback fs on 
		#$clst_cdroot_path, mount it, copy our bootable filesystem over, umount it, and 
		#we then have a ready-to-burn ISO tree at $clst_cdroot_path.

		echo "Calculating size of loopback filesystem..."
		loopsize=`du -ks $clst_chroot_path | cut -f1`
		[ "$loopsize" = "0" ] && loopsize=1
		#increase the size by 1/3, then divide by 4 to get 4k blocks
#		loopsize=$(( ( $loopsize + ( $loopsize / 2 ) ) / 4  ))
		# Add 4MB for filesystem slop
		loopsize=`expr $loopsize + 4096`
		echo "Creating loopback file..."
		dd if=/dev/zero of=$clst_cdroot_path/livecd.loop bs=1k count=$loopsize || die "livecd.loop creation failure"
		#echo "Calculating number of inodes required for ext2 filesystem..."
		#numnodes=`find $clst_chroot_path | wc -l`
		#numnodes=$(( $numnodes + 200 ))
		mke2fs -m 0 -F -q $clst_cdroot_path/livecd.loop || die "Couldn't create ext2 filesystem"
#		mke2fs -m 0 -F -b 4096 -q $clst_cdroot_path/livecd.loop || die "Couldn't create ext2 filesystem"
		install -d $clst_cdroot_path/loopmount
		sync; sync; sleep 3 #try to work around 2.6.0+ loopback bug
		mount -t ext2 -o loop $clst_cdroot_path/livecd.loop $clst_cdroot_path/loopmount || die "Couldn't mount loopback ext2 filesystem"
		sync; sync; sleep 3 #try to work around 2.6.0+ loopback bug
		echo "cp -a $clst_chroot_path/* $clst_cdroot_path/loopmount"
		cp -a $clst_chroot_path/* $clst_cdroot_path/loopmount 

		[ $? -ne 0 ] && { umount $clst_cdroot_path/loopmount; die "Couldn't copy files to loopback ext2 filesystem"; }
		umount $clst_cdroot_path/loopmount || die "Couldn't unmount loopback ext2 filesystem"
		rm -rf $clst_cdroot_path/loopmount
		#now, $clst_cdroot_path should contain a proper bootable image for our iso, including
		#boot loader and loopback filesystem.
}

create_zisofs()
{
	rm -rf "${clst_cdroot_path}/zisofs" > /dev/null 2>&1
	echo "Creating zisofs..."
	mkzftree -z 9 -p2 "${clst_chroot_path}" "${clst_cdroot_path}/zisofs" || die "Could not run mkzftree, did you emerge zisofs"
}

create_noloop()
{
	echo "Copying files for image (no loop)..."
	cp -a "${clst_chroot_path}"/* "${clst_cdroot_path}" || die "Could not copy files to image (no loop)"
}

create_gcloop()
{
	create_normal_loop
	compress_gcloop_ucl -b 131072 -c 10 "${clst_cdroot_path}/livecd.loop" "${clst_cdroot_path}/livecd.gcloop" || die "compress_gcloop_ucl failed, did you emerge gcloop?"
	rm -f "${clst_cdroot_path}/livecd.loop"
	# only a gcloop image should exist in cdroot path
}

create_squashfs()
{
	echo "Creating squashfs..."
	mksquashfs "${clst_chroot_path}" "${clst_cdroot_path}/livecd.squashfs" -noappend || die "mksquashfs failed, did you emerge squashfs-utils?"
}

case $1 in
	kernel)
		shift
		numkernels="$1"
		shift
		$clst_CHROOT $clst_chroot_path /bin/bash << EOF
		env-update
		source /etc/profile
		export CONFIG_PROTECT="-*"
		[ -n "${clst_ENVSCRIPT}" ] && source /tmp/envscript
		emerge genkernel
		install -d /tmp/binaries
EOF
	[ $? -ne 0 ] && exit 1
		count=0
		while [ $count -lt $numkernels ]
		do
			clst_kname="$1"
			shift
			clst_ksource="$1"
			shift
			clst_kextversion="$1"
			shift
			$clst_CHROOT $clst_chroot_path /bin/bash << EOF
				die() {
					echo "$1"
					exit 1
				}
				# Script to build each kernel, kernel-related packages 
				source /etc/profile
				[ -n "${clst_ENVSCRIPT}" ] && source /tmp/envscript
				rm -f /usr/src/linux
				
				#set the timezone for the kernel build
				rm /etc/localtime
				ln -s /usr/share/zoneinfo/UTC /etc/localtime

				[ -e /var/tmp/$clst_kname.use ] && export USE="\$( cat /var/tmp/$clst_kname.use )" || unset USE
				# Don't use pkgcache here, as the kernel source may get emerge with different USE variables
				# (and thus different patches enabled/disabled.) Also, there's no real benefit in using the
				# pkgcache for kernel source ebuilds.
				emerge $clst_ksource || exit 1
				[ ! -e /usr/src/linux ] && die "Can't find required directory /usr/src/linux"
				#if catalyst has set NULL_VALUE, extraversion wasn't specified so we skip this part
				if [ "$clst_kextversion" != "NULL_VALUE" ]
				then
					# Append Extraversion
					sed -i -e "s:EXTRAVERSION \(=.*\):EXTRAVERSION \1-${clst_kextversion}:" /usr/src/linux/Makefile
				fi
				if [ -n "${clst_CCACHE}" ]
				then
					#enable ccache for genkernel
					export PATH="/usr/lib/ccache/bin:\${PATH}"
				fi
				[ -e /etc/init.d/bootsplash ] && sed -i -e 's/gentoo/livecd-2004.1/' /etc/conf.d/bootsplash
				genkernel ${genkernel_args} --kerneldir=/usr/src/linux --kernel-config=/var/tmp/$clst_kname.config --minkernpackage=/tmp/binaries/$clst_kname.tar.bz2 all || exit 1
				#now we merge any kernel-dependent packages
				if [ -e /var/tmp/$clst_kname.packages ]
				then
					for x in \$( cat /var/tmp/$clst_kname.packages )
					do
						# we don't want to use the pkgcache for these since the results
						# are kernel-dependent.
						echo DEBUG emerge "\$x"
						emerge "\$x"
						update-modules
					done
				fi

				#fix to get modprobe.conf
				ln -s /lib/modules/\`sed -n '1s/.* //;1s/"//g; 1p' /usr/src/linux/include/linux/version.h\` /lib/modules/`uname -r`
				/sbin/modules-update
				rm `uname -r`

				cd /usr/src
				rm -rf linux*
				#now the unmerge... (wipe db entry)
				emerge -C $clst_ksource
				unset USE
EOF
			[ $? -ne 0 ] && exit 1 
			count=$(( $count + 1 ))
		done
		$clst_CHROOT $clst_chroot_path /bin/bash << EOF
			#cleanup steps
			source /etc/profile
			emerge -C genkernel 
			/sbin/depscan.sh
			find /lib/modules -name modules.dep -exec touch {} \;
EOF
	[ $? -ne 0 ] && exit 1
	;;

	preclean)
		cat > $clst_chroot_path/etc/conf.d/local.start << EOF
# /etc/conf.d/local.start:

# This is a good place to load any misc.
# programs on startup ( 1>&2 )

echo "root:\`pwgen -s 16\`" | chpasswd  > /dev/null 2>&1

GLTYPE=nvidia
modprobe -qs nvidia > /dev/null 2>&1
if [ "\`lsmod | grep nvidia\`" ]
then
	echo "NVIDIA driver loaded."
else
	modprobe -qs fglrx > /dev/null 2>&1
	if [ "\`lsmod | grep fglrx\`" ]
	then
		echo "ATI driver loaded."
		GLTYPE=ati
	else
		echo "**********************************************************"
		echo "NVIDIA or ATI drivers unable to load; aborting."
		echo "${GAME_SHORT_NAME} requires modern NVIDIA or ATI graphics hardware."
		echo "**********************************************************"
		echo ""
		GLTYPE=xfree
	fi
fi
opengl-update \${GLTYPE}

VERTREFRESH="\`ddcxinfo-knoppix -vsync\`"
if [ "$VERTREFRESH" = "0-0" ]
then
	echo "No DDC information detected; assuming reasonable defaults."
	VERTREFRESH=50-80
	HORIZSYNC=30-70
else
	HORIZSYNC="\`ddcxinfo-knoppix -hsync\`"
fi
sed -i -e "s/##VERTREFRESH##/\$VERTREFRESH/" \
	-e "s/##HORIZSYNC##/\$HORIZSYNC/" \
	-e "s/DefaultColorDepth 16/DefaultColorDepth 24/" \
	/etc/X11/XF86Config-4

# Experimental ALSA stuff
if [ -d /proc/asound/card0 ]; then
	amixer scontrols > /etc/amixer
	[ -n "\`grep Master /etc/amixer\`" ] && amixer set Master 75% \
		&& amixer set Master unmute
	[ -n "\`grep PCM /etc/amixer\`" ] && amixer set PCM 75% \
		&& amixer set PCM unmute
	[ -n "\`grep Mic /etc/amixer\`" ] && amixer set Mic 75% \
		&& amixer set Mic cap
	[ -n "\`grep Wave /etc/amixer\`" ] && amixer set Wave 75% \
		&& amixer set Wave unmute
	[ -n "\`grep Capture /etc/amixer\`" ] && amixer set Capture 75% \
		&& amixer set Capture cap && amixer set Capture unmute
fi
EOF

		cat > $clst_chroot_path/etc/motd << EOF


Welcome to Gentoo Linux.

This is a special version of the Gentoo Linux LiveCD.  This CD is a GameCD for
${GAME_NAME} and is fully playable.  You can also use this CD to install Gentoo
Linux.  Detailed instructions can be found online in the Gentoo Handbook at:

http://www.gentoo.org/doc/en/handbook/index.xml

To (re)start the game, type "startx" at the prompt below.

EOF

		cat > $clst_chroot_path/usr/share/fluxbox/menu << EOF
[begin] (Gentoo)
	[exec] (${GAME_SHORT_NAME}) {${GAME_EXECUTABLE}}
	[exec] (Mozilla Firefox) {firefox http://www.gentoo.org}
	[exec] (Volume) {xterm -e "alsamixer"}

[submenu] (Setup Network)
	[exec] (net-setup eth0) {xterm -e "net-setup eth0"}
	[exec] (net-setup eth1) {xterm -e "net-setup eth1"}

[end]

[submenu] (Terminals)
	[exec] (xterm) {xterm -fg white -bg black}
[end]

[submenu] (Settings)
	[workspaces]   (Workspace List)
[submenu] (Styles) {Choose a style...}
	[stylesdir] (/usr/share/fluxbox/styles)
[end]

	[config] (Configure)
	[reconfig] (Reload config)
[end]

	[restart] (Restart)
[end]
EOF

		cat > $clst_chroot_path/root/.xinitrc << EOF
${GAME_EXECUTABLE} &
exec fluxbox
EOF

		cat > $clst_chroot_path/root/.bash_profile << EOF
#!/bin/bash
if [ -e /etc/startgame ]
then
	rm -f /etc/startgame
	startx
	cat /etc/motd
fi
EOF

		cat > $clst_chroot_path/etc/conf.d/net << EOF
iface_eth0="dhcp"
iface_eth1="dhcp"
EOF

		cat > $clst_chroot_path/usr/sbin/opengl-update << EOF
#!/bin/bash
source /etc/init.d/functions.sh

if [ "\`id -u\`" -ne 0 ]
then
	eerror "\${0}: must be root."
	exit 1
fi

usage() {
cat << FOO
usage: opengl-update <GL implementation>

note:  
       This utility switch between OpenGL implementations.  Currently there
       are two supported implementations, namely "xfree" and "nvidia", the
       implementations for XFree86 and the NVidia drivers respectively.

examples:
       opengl-update xfree
       This will setup things to use libGL.so from XFree86

       opengl-update nvidia
       This will setup things to use libGL.so from the NVidia drivers.
	   
FOO
	exit 1
}

if [ "\$#" -ne 1 ]
then
	usage
fi
if [ ! -d /usr/lib/opengl/\${1} ]
then
	usage
else
	ebegin "Switching to \${1} OpenGL interface"

	#set up the \$LDPATH
	echo "LDPATH=/usr/lib/opengl/\${1}/lib" >/etc/env.d/09opengl
	/usr/sbin/env-update &>/dev/null

	#setup the /usr/lib/libGL.so symlink
	rm -f /etc/opengl/libGL.so /etc/opengl/libGL.so.1
	
	realname="\$(readlink /usr/lib/opengl/\${1}/lib/libGL.so)"
	ln -sf /usr/lib/opengl/\${1}/lib/\${realname} \
		/etc/opengl/libGL.so
	ln -sf /usr/lib/opengl/\${1}/lib/\${realname} \
		/etc/opengl/libGL.so.1

	#setup the /usr/X11R6/lib/libMesaGL.so symlink
	rm -f /etc/opengl/libMesaGL.so
	realname="\$(readlink /usr/lib/opengl/\${1}/lib/libGL.so)"
	ln -sf /usr/lib/opengl/\${1}/lib/\${realname} \
		/etc/opengl/libMesaGL.so

	rm -f /etc/opengl/libGLcore.so*
	
	if [ -e /usr/lib/opengl/\${1}/lib/libGLcore.so ]
	then
		realname="\$(readlink /usr/lib/opengl/\${1}/lib/libGLcore.so)"
		ln -sf /usr/lib/opengl/\${1}/lib/\${realname} \
			/etc/opengl/libGLcore.so
		ln -sf /usr/lib/opengl/\${1}/lib/\${realname} \
			/etc/opengl/libGLcore.so.1
	fi

	#setup the /usr/X11R6/lib/modules/extensions/libglx.so symlink
	rm -f /etc/opengl/libglx.*
	
	if [ -e /usr/lib/opengl/\${1}/extensions/libglx.so ]
	then
		ln -sf /usr/lib/opengl/\${1}/extensions/libglx.so \
			/etc/opengl/libglx.so
	fi
	#setup the /usr/X11R6/lib/modules/extensions/libglx.a symlink
	if [ -e /usr/lib/opengl/\${1}/extensions/libglx.a ]
	then
		ln -sf /usr/lib/opengl/\${1}/extensions/libglx.a \
			/etc/opengl/libglx.a
	fi

	eend 0
fi


# vim:ts=4
EOF

		cat > $clst_chroot_path/usr/sbin/openglify << EOF
#move symlinks to a malleable /etc/opengl directory.
install -d /etc/opengl
mv /usr/lib/libGL.* /etc/opengl/
mv /usr/lib/libGLcore.* /etc/opengl/
ln -sf /etc/opengl/libGL.so /usr/lib/libGL.so
ln -sf /etc/opengl/libGL.so.1 /usr/lib/libGL.so.1
ln -sf /etc/opengl/libGLcore.so /usr/lib/libGLcore.so
ln -sf /etc/opengl/libGLcore.so.1 /usr/lib/libGLcore.so.1
mv /usr/X11R6/lib/libMesaGL.so /etc/opengl/
ln -sf /etc/opengl/libMesaGL.so /usr/X11R6/lib/libMesaGL.so
for x in libglx.a libglx.so
do
	if [ -e /usr/X11R6/lib/modules/extensions/\${x} -o -L \
	/usr/X11R6/lib/modules/extensions/\${x} ] 
	then
		mv /usr/X11R6/lib/modules/extensions/\${x} /etc/opengl/
	fi
	ln -s /etc/opengl/\${x} \
	/usr/X11R6/lib/modules/extensions/\${x}
done
EOF

		$clst_CHROOT $clst_chroot_path /bin/bash << EOF
			# SCRIPT TO UPDATE FILESYSTEM SPECIFIC FOR LIVECD. THIS GETS EXECUTED IN CHROOT
			env-update
			source /etc/profile
			if [ -e /etc/sshd/sshd_config ]
				then
					#allow root logins to the livecd by default
					sed -e "s/^#PermitRootLogin\ yes/PermitRootLogin\ yes/" /etc/ssh/sshd_config > /etc/ssh/sshd_config1
					mv /etc/ssh/sshd_config1 /etc/ssh/sshd_config
			fi
				
			rc-update del iptables default
			rc-update del netmount default
#			rc-update add hotplug default
#			rc-update add kudzu default
			rc-update add autoconfig default
			rc-update del keymaps
			rc-update del consolefont
			rc-update add metalog default
			rc-update add modules default
			rc-update add alsasound default
			rc-update add mkxf86config default
			[ -e /etc/init.d/bootsplash ] && rc-update add bootsplash default && sed -i -e 's/gentoo/livecd-2004.1/' /etc/conf.d/bootsplash
			rm -rf /etc/localtime
			cp /usr/share/zoneinfo/GMT /etc/localtime
			echo "livecd" > /etc/hostname
			echo "2004.1" > /etc/dnsdomainname
			sed -i -e '/\/dev\/[RBS]*/ s/^/#/' /etc/fstab
			echo "tmpfs		/	tmpfs	defaults	0 0" >> /etc/fstab
			sed -i -e '/dev-state/ s/^/#/' /etc/devfsd.conf
			sed -i -e 's/localhost/localhost livecd/' /etc/hosts
			sed -i -e 's/DRIVER nv/DRIVER nvidia/' /usr/share/hwdata/Cards
			sed -i -e 's/DRIVER radeon/DRIVER fglrx/' /usr/share/hwdata/Cards
			sh /usr/sbin/openglify
			touch /etc/startgame /etc/asound.state
			echo "alias cp='cp -i'" >> /etc/profile
			echo "alias ls='ls --color'" >> /etc/profile
			echo "alias mv='mv -i'" >> /etc/profile
			echo "alias pico='nano -w'" >> /etc/profile
			echo "alias rm='rm -i'" >> /etc/profile
			# END OF SCRIPT TO UPDATE FILESYSTEM
EOF
		[ $? -ne 0 ] && exit 1 
	;;

	clean)
		find $clst_chroot_path/usr/lib -iname "*.pyc" -exec rm -f {} \;
	;;

	bootloader)
	;;

	cdfs)
		loopret=1
		if [ "${clst_livecd_cdfstype}" = "normal" ]
		then
			create_normal_loop
			loopret=$?
		elif [ "${clst_livecd_cdfstype}" = "zisofs" ]
		then
			create_zisofs
			loopret=$?
		elif [ "${clst_livecd_cdfstype}" = "noloop" ]
		then
			create_noloop
			loopret=$?
		elif [ "${clst_livecd_cdfstype}" = "gcloop" ]
		then
			create_gcloop
			loopret=$?
		elif [ "${clst_livecd_cdfstype}" = "squashfs" ]
		then
			create_squashfs
			loopret=$?
		fi		
		exit $loopret
	;;

	iso)
	;;
esac
exit 0