[ 25.449] X.Org X Server 1.10.4 Release Date: 2011-08-19 [ 25.452] X Protocol Version 11, Revision 0 [ 25.453] Build Operating System: Linux 3.0.6-gentoo x86_64 Gentoo [ 25.454] Current Operating System: Linux t520 3.0.6-gentoo #6 SMP Wed Nov 16 23:12:09 CET 2011 x86_64 [ 25.455] Kernel command line: BOOT_IMAGE=/3.0.6/bzImage root=/dev/sda3 rootfstype=ext4 [ 25.456] Build Date: 11 November 2011 06:58:56AM [ 25.457] [ 25.458] Current version of pixman: 0.22.2 [ 25.459] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 25.461] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 25.464] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 30 05:23:26 2011 [ 25.515] (==) Using config file: "/etc/X11/xorg.conf" [ 25.516] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 25.517] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 25.558] (==) ServerLayout "Layout0" [ 25.558] (**) |-->Screen "Screen0" (0) [ 25.558] (**) | |-->Monitor "Monitor0" [ 25.558] (**) | |-->Device "Device0" [ 25.558] (==) Automatically adding devices [ 25.558] (==) Automatically enabling devices [ 25.674] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [ 25.674] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 25.674] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 25.674] (II) Loader magic: 0x7d70a0 [ 25.674] (II) Module ABI versions: [ 25.674] X.Org ANSI C Emulation: 0.4 [ 25.674] X.Org Video Driver: 10.0 [ 25.674] X.Org XInput driver : 12.2 [ 25.674] X.Org Server Extension : 5.0 [ 25.674] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21d1 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64 [ 25.674] (II) Open ACPI successful (/var/run/acpid.socket) [ 25.674] (II) LoadModule: "extmod" [ 25.676] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so [ 25.686] (II) Module extmod: vendor="X.Org Foundation" [ 25.686] compiled for 1.10.4, module version = 1.0.0 [ 25.686] Module class: X.Org Server Extension [ 25.686] ABI class: X.Org Server Extension, version 5.0 [ 25.686] (II) Loading extension MIT-SCREEN-SAVER [ 25.686] (II) Loading extension XFree86-VidModeExtension [ 25.686] (II) Loading extension XFree86-DGA [ 25.686] (II) Loading extension DPMS [ 25.686] (II) Loading extension XVideo [ 25.686] (II) Loading extension XVideo-MotionCompensation [ 25.686] (II) Loading extension X-Resource [ 25.686] (II) LoadModule: "dbe" [ 25.762] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so [ 25.776] (II) Module dbe: vendor="X.Org Foundation" [ 25.776] compiled for 1.10.4, module version = 1.0.0 [ 25.776] Module class: X.Org Server Extension [ 25.776] ABI class: X.Org Server Extension, version 5.0 [ 25.776] (II) Loading extension DOUBLE-BUFFER [ 25.776] (II) LoadModule: "glx" [ 25.776] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 25.792] (II) Module glx: vendor="X.Org Foundation" [ 25.792] compiled for 1.10.4, module version = 1.0.0 [ 25.792] ABI class: X.Org Server Extension, version 5.0 [ 25.792] (==) AIGLX enabled [ 25.792] (II) Loading extension GLX [ 25.792] (II) LoadModule: "record" [ 25.792] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so [ 25.793] (II) Module record: vendor="X.Org Foundation" [ 25.793] compiled for 1.10.4, module version = 1.13.0 [ 25.793] Module class: X.Org Server Extension [ 25.793] ABI class: X.Org Server Extension, version 5.0 [ 25.793] (II) Loading extension RECORD [ 25.793] (II) LoadModule: "dri" [ 25.793] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so [ 25.864] (II) Module dri: vendor="X.Org Foundation" [ 25.864] compiled for 1.10.4, module version = 1.0.0 [ 25.864] ABI class: X.Org Server Extension, version 5.0 [ 25.864] (II) Loading extension XFree86-DRI [ 25.864] (II) LoadModule: "dri2" [ 25.865] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so [ 25.875] (II) Module dri2: vendor="X.Org Foundation" [ 25.875] compiled for 1.10.4, module version = 1.2.0 [ 25.875] ABI class: X.Org Server Extension, version 5.0 [ 25.875] (II) Loading extension DRI2 [ 25.875] (II) LoadModule: "intel" [ 25.923] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 25.939] (II) Module intel: vendor="X.Org Foundation" [ 25.939] compiled for 1.10.4, module version = 2.17.0 [ 25.939] Module class: X.Org Video Driver [ 25.939] ABI class: X.Org Video Driver, version 10.0 [ 25.939] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server [ 25.940] (--) using VT number 7 [ 25.946] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 25.946] drmOpenDevice: node name is /dev/dri/card0 [ 25.946] drmOpenDevice: open result is 9, (OK) [ 25.946] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 25.946] drmOpenDevice: node name is /dev/dri/card0 [ 25.946] drmOpenDevice: open result is 9, (OK) [ 25.946] drmOpenByBusid: drmOpenMinor returns 9 [ 25.946] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 25.946] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 25.946] (==) intel(0): RGB weight 888 [ 25.946] (==) intel(0): Default visual is TrueColor [ 25.946] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+) [ 25.946] (--) intel(0): Chipset: "Sandybridge Mobile (GT2+)" [ 25.946] (**) intel(0): Relaxed fencing enabled [ 25.946] (**) intel(0): Wait on SwapBuffers? enabled [ 25.946] (**) intel(0): Triple buffering? enabled [ 25.946] (**) intel(0): Framebuffer tiled [ 25.946] (**) intel(0): Pixmaps tiled [ 25.946] (**) intel(0): 3D buffers tiled [ 25.946] (**) intel(0): SwapBuffers wait enabled [ 25.946] (==) intel(0): video overlay key set to 0x101fe [ 25.946] (II) intel(0): Output LVDS1 using monitor section Monitor0 [ 25.946] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 26.009] (II) intel(0): Output VGA1 using monitor section Monitor1 [ 26.009] (II) intel(0): EDID for output LVDS1 [ 26.009] (II) intel(0): Manufacturer: LEN Model: 40b2 Serial#: 0 [ 26.009] (II) intel(0): Year: 2009 Week: 1 [ 26.009] (II) intel(0): EDID Version: 1.3 [ 26.009] (II) intel(0): Digital Display Input [ 26.009] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 26.009] (II) intel(0): Gamma: 2.20 [ 26.009] (II) intel(0): DPMS capabilities: StandBy Suspend Off [ 26.009] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 26.009] (II) intel(0): First detailed timing is preferred mode [ 26.009] (II) intel(0): redX: 0.676 redY: 0.314 greenX: 0.215 greenY: 0.665 [ 26.009] (II) intel(0): blueX: 0.141 blueY: 0.069 whiteX: 0.313 whiteY: 0.329 [ 26.009] (II) intel(0): Manufacturer's mask: 0 [ 26.009] (II) intel(0): Supported detailed timing: [ 26.009] (II) intel(0): clock: 139.0 MHz Image Size: 344 x 193 mm [ 26.009] (II) intel(0): h_active: 1920 h_sync: 1980 h_sync_end 2028 h_blank_end 2050 h_border: 0 [ 26.009] (II) intel(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1130 v_border: 0 [ 26.009] (II) intel(0): Supported detailed timing: [ 26.009] (II) intel(0): clock: 115.8 MHz Image Size: 344 x 193 mm [ 26.009] (II) intel(0): h_active: 1920 h_sync: 1980 h_sync_end 2028 h_blank_end 2050 h_border: 0 [ 26.009] (II) intel(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1130 v_border: 0 [ 26.009] (II) intel(0): Unknown vendor-specific block f [ 26.009] (II) intel(0): B156HW01 V4 [ 26.009] (II) intel(0): EDID (in hex): [ 26.009] (II) intel(0): 00ffffffffffff0030aeb24000000000 [ 26.009] (II) intel(0): 0113010380221378ea2135ad5037aa24 [ 26.009] (II) intel(0): 11505400000001010101010101010101 [ 26.009] (II) intel(0): 0101010101014c368082703832403c30 [ 26.009] (II) intel(0): aa0058c1100000183f2d808270383240 [ 26.009] (II) intel(0): 3c30aa0058c1100000180000000f00d1 [ 26.009] (II) intel(0): 0932d109281b190006af5634000000fe [ 26.009] (II) intel(0): 004231353648573031205634200a00d6 [ 26.009] (II) intel(0): EDID vendor "LEN", prod id 16562 [ 26.009] (II) intel(0): Printing DDC gathered Modelines: [ 26.009] (II) intel(0): Modeline "1920x1080"x0.0 139.00 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (67.8 kHz) [ 26.009] (II) intel(0): Modeline "1920x1080"x0.0 115.83 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (56.5 kHz) [ 26.009] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 26.009] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 26.009] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 26.009] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 26.009] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 26.009] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 26.009] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 26.009] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 26.009] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 26.009] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 26.009] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 26.009] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 26.009] (II) intel(0): Printing probed modes for output LVDS1 [ 26.009] (II) intel(0): Modeline "1920x1080"x60.0 139.00 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (67.8 kHz) [ 26.009] (II) intel(0): Modeline "1920x1080"x50.0 115.83 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (56.5 kHz) [ 26.009] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz) [ 26.009] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 26.009] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 26.009] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 26.009] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 26.009] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 26.009] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 26.072] (II) intel(0): EDID for output VGA1 [ 26.072] (II) intel(0): Manufacturer: HSD Model: 1cf3 Serial#: 86 [ 26.072] (II) intel(0): Year: 2009 Week: 17 [ 26.072] (II) intel(0): EDID Version: 1.3 [ 26.072] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 26.072] (II) intel(0): Sync: Separate SyncOnGreen [ 26.072] (II) intel(0): Max Image Size [cm]: horiz.: 59 vert.: 37 [ 26.072] (II) intel(0): Gamma: 2.20 [ 26.072] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 26.072] (II) intel(0): First detailed timing is preferred mode [ 26.072] (II) intel(0): redX: 0.650 redY: 0.329 greenX: 0.300 greenY: 0.623 [ 26.072] (II) intel(0): blueX: 0.142 blueY: 0.065 whiteX: 0.316 whiteY: 0.341 [ 26.072] (II) intel(0): Supported established timings: [ 26.072] (II) intel(0): 720x400@70Hz [ 26.072] (II) intel(0): 640x480@60Hz [ 26.072] (II) intel(0): 640x480@67Hz [ 26.072] (II) intel(0): 640x480@72Hz [ 26.072] (II) intel(0): 640x480@75Hz [ 26.072] (II) intel(0): 800x600@56Hz [ 26.072] (II) intel(0): 800x600@60Hz [ 26.072] (II) intel(0): 800x600@72Hz [ 26.072] (II) intel(0): 800x600@75Hz [ 26.072] (II) intel(0): 832x624@75Hz [ 26.072] (II) intel(0): 1024x768@60Hz [ 26.072] (II) intel(0): 1024x768@70Hz [ 26.072] (II) intel(0): 1024x768@75Hz [ 26.072] (II) intel(0): 1280x1024@75Hz [ 26.072] (II) intel(0): 1152x864@75Hz [ 26.072] (II) intel(0): Manufacturer's mask: 0 [ 26.072] (II) intel(0): Supported standard timings: [ 26.072] (II) intel(0): #0: hsize: 1920 vsize 1200 refresh: 60 vid: 209 [ 26.072] (II) intel(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 26.072] (II) intel(0): #2: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 26.072] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 26.072] (II) intel(0): #4: hsize: 1400 vsize 1050 refresh: 60 vid: 16528 [ 26.072] (II) intel(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 26.072] (II) intel(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 26.072] (II) intel(0): #7: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 26.072] (II) intel(0): Supported detailed timing: [ 26.072] (II) intel(0): clock: 154.0 MHz Image Size: 593 x 371 mm [ 26.072] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 26.072] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 [ 26.072] (II) intel(0): Serial No: 917LB3QA00086 [ 26.072] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 24 H max: 80 kHz, PixClock max 155 MHz [ 26.072] (II) intel(0): Monitor name: Hanns.G HG281 [ 26.072] (II) intel(0): EDID (in hex): [ 26.072] (II) intel(0): 00ffffffffffff002264f31c56000000 [ 26.072] (II) intel(0): 111301030a3b2578ea9e71a6544c9f24 [ 26.072] (II) intel(0): 105157bfef80d100b300a94095009040 [ 26.072] (II) intel(0): 81808140714f283c80a070b023403020 [ 26.072] (II) intel(0): 360051732100001a000000ff00393137 [ 26.072] (II) intel(0): 4c423351413030303836000000fd0038 [ 26.072] (II) intel(0): 4b18500f000a202020202020000000fc [ 26.072] (II) intel(0): 0048616e6e732e4720484732383100e4 [ 26.072] (II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan) [ 26.072] (II) intel(0): Printing probed modes for output VGA1 [ 26.072] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) [ 26.072] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) [ 26.072] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz) [ 26.072] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 26.072] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 26.072] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) [ 26.072] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 26.072] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 26.072] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) [ 26.072] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 26.072] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 26.072] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 26.072] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 26.072] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 26.072] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 26.072] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 26.072] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) [ 26.072] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 26.072] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 26.072] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 26.072] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 26.072] (II) intel(0): Output LVDS1 connected [ 26.072] (II) intel(0): Output VGA1 connected [ 26.072] (II) intel(0): Using fuzzy aspect match for initial modes [ 26.072] (II) intel(0): Output LVDS1 using initial mode 1400x1050 [ 26.072] (II) intel(0): Output VGA1 using initial mode 1400x1050 [ 26.072] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 26.072] (II) intel(0): Kernel page flipping support detected, enabling [ 26.072] (**) intel(0): Display dimensions: (340, 190) mm [ 26.072] (**) intel(0): DPI set to (104, 140) [ 26.072] (II) Loading sub module "fb" [ 26.072] (II) LoadModule: "fb" [ 26.072] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 26.074] (II) Module fb: vendor="X.Org Foundation" [ 26.074] compiled for 1.10.4, module version = 1.0.0 [ 26.074] ABI class: X.Org ANSI C Emulation, version 0.4 [ 26.074] (II) Loading sub module "dri2" [ 26.074] (II) LoadModule: "dri2" [ 26.074] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so [ 26.074] (II) Module dri2: vendor="X.Org Foundation" [ 26.074] compiled for 1.10.4, module version = 1.2.0 [ 26.074] ABI class: X.Org Server Extension, version 5.0 [ 26.074] (==) Depth 24 pixmap format is 32 bpp [ 26.074] (II) intel(0): [DRI2] Setup complete [ 26.074] (II) intel(0): [DRI2] DRI driver: i965 [ 26.074] (II) intel(0): Allocated new frame buffer 1408x1050 stride 5632, tiled [ 26.085] (II) UXA(0): Driver registered support for the following operations: [ 26.085] (II) solid [ 26.085] (II) copy [ 26.085] (II) composite (RENDER acceleration) [ 26.085] (II) put_image [ 26.085] (II) get_image [ 26.085] (==) intel(0): Backing store disabled [ 26.085] (==) intel(0): Silken mouse enabled [ 26.085] (II) intel(0): Initializing HW Cursor [ 26.667] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 26.669] (**) intel(0): DPMS enabled [ 26.669] (==) intel(0): Intel XvMC decoder enabled [ 26.669] (II) intel(0): Set up textured video [ 26.669] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 26.669] (II) intel(0): direct rendering: DRI2 Enabled [ 26.669] (==) intel(0): hotplug detection: "enabled" [ 26.669] (--) RandR disabled [ 26.669] (II) Initializing built-in extension Generic Event Extension [ 26.669] (II) Initializing built-in extension SHAPE [ 26.669] (II) Initializing built-in extension MIT-SHM [ 26.669] (II) Initializing built-in extension XInputExtension [ 26.669] (II) Initializing built-in extension XTEST [ 26.669] (II) Initializing built-in extension BIG-REQUESTS [ 26.669] (II) Initializing built-in extension SYNC [ 26.669] (II) Initializing built-in extension XKEYBOARD [ 26.669] (II) Initializing built-in extension XC-MISC [ 26.669] (II) Initializing built-in extension XINERAMA [ 26.669] (II) Initializing built-in extension XFIXES [ 26.669] (II) Initializing built-in extension RENDER [ 26.669] (II) Initializing built-in extension RANDR [ 26.669] (II) Initializing built-in extension COMPOSITE [ 26.669] (II) Initializing built-in extension DAMAGE [ 26.945] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 26.945] (II) AIGLX: enabled GLX_INTEL_swap_event [ 26.945] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 26.945] (II) AIGLX: enabled GLX_SGI_make_current_read [ 26.945] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 26.945] (II) AIGLX: Loaded and initialized /usr/lib64/dri/i965_dri.so [ 26.945] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 26.945] (II) intel(0): Setting screen physical size to 370 x 277 [ 27.385] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 27.385] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 27.385] (**) Power Button: Applying InputClass "keyboard-all" [ 27.385] (II) LoadModule: "evdev" [ 27.385] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 27.399] (II) Module evdev: vendor="X.Org Foundation" [ 27.399] compiled for 1.10.4, module version = 2.6.0 [ 27.399] Module class: X.Org XInput Driver [ 27.399] ABI class: X.Org XInput driver, version 12.2 [ 27.399] (II) Using input driver 'evdev' for 'Power Button' [ 27.399] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 27.399] (**) Power Button: always reports core events [ 27.399] (**) Power Button: Device: "/dev/input/event2" [ 27.399] (--) Power Button: Found keys [ 27.399] (II) Power Button: Configuring as keyboard [ 27.399] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 27.399] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 27.399] (**) Option "xkb_rules" "evdev" [ 27.399] (**) Option "xkb_model" "evdev" [ 27.399] (**) Option "xkb_layout" "de(nodeadkeys)" [ 27.399] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 27.433] (II) config/udev: Adding input device Video Bus (/dev/input/event3) [ 27.433] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 27.433] (**) Video Bus: Applying InputClass "keyboard-all" [ 27.433] (II) Using input driver 'evdev' for 'Video Bus' [ 27.433] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 27.433] (**) Video Bus: always reports core events [ 27.433] (**) Video Bus: Device: "/dev/input/event3" [ 27.433] (--) Video Bus: Found keys [ 27.433] (II) Video Bus: Configuring as keyboard [ 27.433] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3" [ 27.433] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) [ 27.433] (**) Option "xkb_rules" "evdev" [ 27.433] (**) Option "xkb_model" "evdev" [ 27.433] (**) Option "xkb_layout" "de(nodeadkeys)" [ 27.433] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 27.438] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 27.438] (II) No input driver/identifier specified (ignoring) [ 27.438] (II) config/udev: Adding input device Sleep Button (/dev/input/event1) [ 27.438] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 27.438] (**) Sleep Button: Applying InputClass "keyboard-all" [ 27.438] (II) Using input driver 'evdev' for 'Sleep Button' [ 27.438] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 27.438] (**) Sleep Button: always reports core events [ 27.438] (**) Sleep Button: Device: "/dev/input/event1" [ 27.438] (--) Sleep Button: Found keys [ 27.438] (II) Sleep Button: Configuring as keyboard [ 27.438] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1" [ 27.438] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) [ 27.438] (**) Option "xkb_rules" "evdev" [ 27.438] (**) Option "xkb_model" "evdev" [ 27.438] (**) Option "xkb_layout" "de(nodeadkeys)" [ 27.438] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 27.441] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6) [ 27.441] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall" [ 27.441] (II) Using input driver 'evdev' for 'Logitech USB Receiver' [ 27.441] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 27.441] (**) Logitech USB Receiver: always reports core events [ 27.441] (**) Logitech USB Receiver: Device: "/dev/input/event6" [ 27.441] (--) Logitech USB Receiver: Found 9 mouse buttons [ 27.441] (--) Logitech USB Receiver: Found scroll wheel(s) [ 27.441] (--) Logitech USB Receiver: Found relative axes [ 27.441] (--) Logitech USB Receiver: Found x and y relative axes [ 27.441] (II) Logitech USB Receiver: Configuring as mouse [ 27.441] (II) Logitech USB Receiver: Adding scrollwheel support [ 27.441] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5 [ 27.441] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 27.441] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.0/input/input6/event6" [ 27.441] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE) [ 27.441] (II) Logitech USB Receiver: initialized for relative axes. [ 27.441] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1 [ 27.441] (**) Logitech USB Receiver: (accel) acceleration profile 0 [ 27.441] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 27.441] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 27.441] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1) [ 27.441] (II) No input driver/identifier specified (ignoring) [ 27.441] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event7) [ 27.441] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 27.441] (**) Logitech Logitech USB Keyboard: Applying InputClass "keyboard-all" [ 27.441] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard' [ 27.441] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 27.442] (**) Logitech Logitech USB Keyboard: always reports core events [ 27.442] (**) Logitech Logitech USB Keyboard: Device: "/dev/input/event7" [ 27.442] (--) Logitech Logitech USB Keyboard: Found keys [ 27.442] (II) Logitech Logitech USB Keyboard: Configuring as keyboard [ 27.442] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.3/1-1.5.3:1.0/input/input7/event7" [ 27.442] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD) [ 27.442] (**) Option "xkb_rules" "evdev" [ 27.442] (**) Option "xkb_model" "evdev" [ 27.442] (**) Option "xkb_layout" "de(nodeadkeys)" [ 27.442] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 27.442] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event8) [ 27.442] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev pointer catchall" [ 27.442] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 27.442] (**) Logitech Logitech USB Keyboard: Applying InputClass "keyboard-all" [ 27.442] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard' [ 27.442] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 27.442] (**) Logitech Logitech USB Keyboard: always reports core events [ 27.442] (**) Logitech Logitech USB Keyboard: Device: "/dev/input/event8" [ 27.442] (--) Logitech Logitech USB Keyboard: Found 20 mouse buttons [ 27.442] (--) Logitech Logitech USB Keyboard: Found scroll wheel(s) [ 27.442] (--) Logitech Logitech USB Keyboard: Found relative axes [ 27.442] (--) Logitech Logitech USB Keyboard: Found x and y relative axes [ 27.442] (--) Logitech Logitech USB Keyboard: Found keys [ 27.442] (II) Logitech Logitech USB Keyboard: Configuring as mouse [ 27.442] (II) Logitech Logitech USB Keyboard: Configuring as keyboard [ 27.442] (II) Logitech Logitech USB Keyboard: Adding scrollwheel support [ 27.442] (**) Logitech Logitech USB Keyboard: YAxisMapping: buttons 4 and 5 [ 27.442] (**) Logitech Logitech USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 27.442] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.3/1-1.5.3:1.1/input/input8/event8" [ 27.442] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD) [ 27.442] (**) Option "xkb_rules" "evdev" [ 27.442] (**) Option "xkb_model" "evdev" [ 27.442] (**) Option "xkb_layout" "de(nodeadkeys)" [ 27.442] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 27.443] (II) Logitech Logitech USB Keyboard: initialized for relative axes. [ 27.443] (**) Logitech Logitech USB Keyboard: (accel) keeping acceleration scheme 1 [ 27.443] (**) Logitech Logitech USB Keyboard: (accel) acceleration profile 0 [ 27.443] (**) Logitech Logitech USB Keyboard: (accel) acceleration factor: 2.000 [ 27.443] (**) Logitech Logitech USB Keyboard: (accel) acceleration threshold: 4 [ 27.443] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/mouse2) [ 27.443] (**) Logitech Logitech USB Keyboard: Applying InputClass "keyboard-all" [ 27.443] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard' [ 27.443] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 27.443] (**) Logitech Logitech USB Keyboard: always reports core events [ 27.443] (**) Logitech Logitech USB Keyboard: Device: "/dev/input/mouse2" [ 27.443] (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device [ 27.477] (EE) PreInit returned 8 for "Logitech Logitech USB Keyboard" [ 27.477] (II) UnloadModule: "evdev" [ 27.477] (II) Unloading evdev [ 27.480] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4) [ 27.480] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 27.480] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all" [ 27.480] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 27.480] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 27.480] (**) AT Translated Set 2 keyboard: always reports core events [ 27.480] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4" [ 27.480] (--) AT Translated Set 2 keyboard: Found keys [ 27.480] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 27.480] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4" [ 27.480] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 27.480] (**) Option "xkb_rules" "evdev" [ 27.480] (**) Option "xkb_model" "evdev" [ 27.480] (**) Option "xkb_layout" "de(nodeadkeys)" [ 27.480] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 27.481] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event5) [ 27.481] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall" [ 27.481] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint' [ 27.481] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 27.481] (**) TPPS/2 IBM TrackPoint: always reports core events [ 27.481] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event5" [ 27.481] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons [ 27.481] (--) TPPS/2 IBM TrackPoint: Found relative axes [ 27.481] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes [ 27.481] (II) TPPS/2 IBM TrackPoint: Configuring as mouse [ 27.481] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5 [ 27.481] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 27.481] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5" [ 27.481] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE) [ 27.481] (II) TPPS/2 IBM TrackPoint: initialized for relative axes. [ 27.481] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1 [ 27.481] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0 [ 27.481] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000 [ 27.481] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4 [ 27.481] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0) [ 27.481] (II) No input driver/identifier specified (ignoring)