rc log

rc.log (text/plain), 6.74 KB, created by Hristo Iliev on 2011-09-30 18:39:31 UTC

rc shutdown logging started at Sat Oct  1 00:36:12 2011

 * Stopping local
 [ ok ]
 * Stopping vixie-cron ...
 [ ok ]
 * Saving random seed ...
 [ ok ]
 * Deactivating swap devices ...
 [ ok ]
 * Stopping D-BUS system messagebus ...
 [ ok ]
 * Stopping apache2 ...
 [ ok ]
 * Stopping sshd ...
 [ ok ]
 * Stopping  ...
 * Stopping mysqld (0)
 [ ok ]
 * Unmounting network filesystems ...
 [ ok ]
 * Bringing down interface eth1
 *   Removing addresses
 *     192.168.1.99/24
 * Bringing down interface lo
 *   Removing addresses
 * Stopping metalog ...
 [ ok ]
 * Storing ALSA Mixer Levels ...
 [ ok ]
 * Unmounting loop devices
 * Unmounting filesystems
 * Stopping udevd ...
 [ ok ]

rc shutdown logging stopped at Sat Oct  1 00:36:17 2011


rc boot logging started at Sat Oct  1 00:36:47 2011

 * Setting system clock using the hardware clock [UTC] ...
 [ ok ]
+ '[' '!' -f /proc/modules ']'
++ uname -r
+ local KV=2.6.39-gentoo-r3
+ local KV_MAJOR=2
+ local x=6.39-gentoo-r3
+ local KV_MINOR=6
+ x=39-gentoo-r3
+ local KV_MICRO=39
+ local list= x= xx= y= args= mpargs= cnt=0 a=
+ for x in '"$KV"' '$KV_MAJOR.$KV_MINOR.$KV_MICRO' '$KV_MAJOR.$KV_MINOR'
++ shell_var 2.6.39-gentoo-r3
+ eval 'list=$modules_2_6_39_gentoo_r3'
++ list=
+ '[' -n '' ']'
+ for x in '"$KV"' '$KV_MAJOR.$KV_MINOR.$KV_MICRO' '$KV_MAJOR.$KV_MINOR'
++ shell_var 2.6.39
+ eval 'list=$modules_2_6_39'
++ list=
+ '[' -n '' ']'
+ for x in '"$KV"' '$KV_MAJOR.$KV_MINOR.$KV_MICRO' '$KV_MAJOR.$KV_MINOR'
++ shell_var 2.6
+ eval 'list=$modules_2_6'
++ list=
+ '[' -n '' ']'
+ '[' -z '' ']'
+ list='i2c-dev bttv snd-bt87x'
+ for x in '$list'
+ a=i2c-dev
+ '[' i2c-dev = i2c-dev ']'
+ unset mpargs
+ ebegin 'Loading module i2c-dev'
 * Loading module i2c-dev ...
++ shell_var i2c-dev
+ aa=i2c_dev
++ shell_var i2c-dev
+ xx=i2c_dev
+ for y in '"$KV"' '$KV_MAJOR.$KV_MINOR.$KV_MICRO' '$KV_MAJOR.$KV_MINOR'
++ shell_var 2.6.39-gentoo-r3
+ eval 'args=$module_i2c_dev_args_2_6_39_gentoo_r3'
++ args=
+ '[' -n '' ']'
++ shell_var 2.6.39-gentoo-r3
+ eval 'args=$module_i2c_dev_args_2_6_39_gentoo_r3'
++ args=
+ '[' -n '' ']'
+ for y in '"$KV"' '$KV_MAJOR.$KV_MINOR.$KV_MICRO' '$KV_MAJOR.$KV_MINOR'
++ shell_var 2.6.39
+ eval 'args=$module_i2c_dev_args_2_6_39'
++ args=
+ '[' -n '' ']'
++ shell_var 2.6.39
+ eval 'args=$module_i2c_dev_args_2_6_39'
++ args=
+ '[' -n '' ']'
+ for y in '"$KV"' '$KV_MAJOR.$KV_MINOR.$KV_MICRO' '$KV_MAJOR.$KV_MINOR'
++ shell_var 2.6
+ eval 'args=$module_i2c_dev_args_2_6'
++ args=
+ '[' -n '' ']'
++ shell_var 2.6
+ eval 'args=$module_i2c_dev_args_2_6'
++ args=
+ '[' -n '' ']'
+ '[' -z '' ']'
+ eval 'args=$module_i2c_dev_args'
++ args=
+ '[' -z '' ']'
+ eval 'args=$module_i2c_dev_args'
++ args=
+ eval modprobe -q '' i2c-dev ''
++ modprobe -q i2c-dev
+ eend 0 'Failed to load i2c-dev'
 [ ok ]
+ cnt=1
+ for x in '$list'
+ a=bttv
+ '[' bttv = bttv ']'
+ unset mpargs
+ ebegin 'Loading module bttv'
 * Loading module bttv ...
++ shell_var bttv
+ aa=bttv
++ shell_var bttv
+ xx=bttv
+ for y in '"$KV"' '$KV_MAJOR.$KV_MINOR.$KV_MICRO' '$KV_MAJOR.$KV_MINOR'
++ shell_var 2.6.39-gentoo-r3
+ eval 'args=$module_bttv_args_2_6_39_gentoo_r3'
++ args=
+ '[' -n '' ']'
++ shell_var 2.6.39-gentoo-r3
+ eval 'args=$module_bttv_args_2_6_39_gentoo_r3'
++ args=
+ '[' -n '' ']'
+ for y in '"$KV"' '$KV_MAJOR.$KV_MINOR.$KV_MICRO' '$KV_MAJOR.$KV_MINOR'
++ shell_var 2.6.39
+ eval 'args=$module_bttv_args_2_6_39'
++ args=
+ '[' -n '' ']'
++ shell_var 2.6.39
+ eval 'args=$module_bttv_args_2_6_39'
++ args=
+ '[' -n '' ']'
+ for y in '"$KV"' '$KV_MAJOR.$KV_MINOR.$KV_MICRO' '$KV_MAJOR.$KV_MINOR'
++ shell_var 2.6
+ eval 'args=$module_bttv_args_2_6'
++ args=
+ '[' -n '' ']'
++ shell_var 2.6
+ eval 'args=$module_bttv_args_2_6'
++ args=
+ '[' -n '' ']'
+ '[' -z '' ']'
+ eval 'args=$module_bttv_args'
++ args=card=0x96,0x96
+ '[' -z card=0x96,0x96 ']'
+ eval modprobe -q '' bttv card=0x96,0x96
++ modprobe -q bttv card=0x96,0x96
+ eend 0 'Failed to load bttv'
 [ ok ]
+ cnt=2
+ for x in '$list'
+ a=snd-bt87x
+ '[' snd-bt87x = snd-bt87x ']'
+ unset mpargs
+ ebegin 'Loading module snd-bt87x'
 * Loading module snd-bt87x ...
++ shell_var snd-bt87x
+ aa=snd_bt87x
++ shell_var snd-bt87x
+ xx=snd_bt87x
+ for y in '"$KV"' '$KV_MAJOR.$KV_MINOR.$KV_MICRO' '$KV_MAJOR.$KV_MINOR'
++ shell_var 2.6.39-gentoo-r3
+ eval 'args=$module_snd_bt87x_args_2_6_39_gentoo_r3'
++ args=
+ '[' -n '' ']'
++ shell_var 2.6.39-gentoo-r3
+ eval 'args=$module_snd_bt87x_args_2_6_39_gentoo_r3'
++ args=
+ '[' -n '' ']'
+ for y in '"$KV"' '$KV_MAJOR.$KV_MINOR.$KV_MICRO' '$KV_MAJOR.$KV_MINOR'
++ shell_var 2.6.39
+ eval 'args=$module_snd_bt87x_args_2_6_39'
++ args=
+ '[' -n '' ']'
++ shell_var 2.6.39
+ eval 'args=$module_snd_bt87x_args_2_6_39'
++ args=
+ '[' -n '' ']'
+ for y in '"$KV"' '$KV_MAJOR.$KV_MINOR.$KV_MICRO' '$KV_MAJOR.$KV_MINOR'
++ shell_var 2.6
+ eval 'args=$module_snd_bt87x_args_2_6'
++ args=
+ '[' -n '' ']'
++ shell_var 2.6
+ eval 'args=$module_snd_bt87x_args_2_6'
++ args=
+ '[' -n '' ']'
+ '[' -z '' ']'
+ eval 'args=$module_snd_bt87x_args'
++ args=
+ '[' -z '' ']'
+ eval 'args=$module_snd_bt87x_args'
++ args=
+ eval modprobe -q '' snd-bt87x ''
++ modprobe -q snd-bt87x
+ eend 0 'Failed to load snd-bt87x'
 [ ok ]
+ cnt=3
+ einfo 'Autoloaded 3 module(s)'
 * Autoloaded 3 module(s)
++ command -v start_post
+ '[' '' = start_post ']'
+ shift
+ continue 2
+ '[' -n '' ']'
 * Checking local filesystems  ...
/dev/sda3: clean, 247451/4997120 files, 1042780/19972023 blocks
/dev/sda1: clean, 35/8032 files, 5977/32096 blocks
 [ ok ]
 * Remounting root filesystem read/write ...
 [ ok ]
 * Updating /etc/mtab ...
 [ ok ]
 * Mounting local filesystems ...
 [ ok ]
 * Configuring kernel parameters ...
 [ ok ]
 * Creating user login records ...
 [ ok ]
 * Cleaning /var/run ...
 [ ok ]
 * Wiping /tmp directory ...
 [ ok ]
 * Loading ALSA modules ...
 [ ok ]
 * Restoring Mixer Levels ...
 [ ok ]
 * Setting hostname to security ...
 [ ok ]
 * Setting terminal encoding [UTF-8] ...
 [ ok ]
 * Setting keyboard mode [UTF-8] ...
 [ ok ]
 * Loading key mappings [us] ...
 [ ok ]
 * Bringing up interface lo
 *   127.0.0.1/8 ...
 [ ok ]
 *   Adding routes
 *     127.0.0.0/8 via 127.0.0.1 ...
 [ ok ]
 * Mounting USB device filesystem [usbfs] ...
 [ ok ]
 * Mounting misc binary format filesystem ...
 [ ok ]
 * Activating swap devices ...
 [ ok ]
 * Initializing random number generator ...
 [ ok ]

rc boot logging stopped at Sat Oct  1 00:36:51 2011


rc default logging started at Sat Oct  1 00:36:51 2011

 * Bringing up interface eth1
 *   192.168.1.99 ...
 [ ok ]
 * Mounting network filesystems ...
 [ ok ]
 * Starting  ...
 * Starting  (/etc/mysql/my.cnf)
 [ ok ]
 * Starting metalog ...
 [ ok ]
 * Starting sshd ...
 [ ok ]
 * Starting apache2 ...
 [ ok ]
 * Starting D-BUS system messagebus ...
 [ ok ]
 * Doing udev cleanups
 * Starting vixie-cron ...
 [ ok ]
 * Starting local
 [ ok ]

rc default logging stopped at Sat Oct  1 00:36:57 2011