[ 418.323] X.Org X Server 1.10.2 Release Date: 2011-05-28 [ 418.324] X Protocol Version 11, Revision 0 [ 418.324] Build Operating System: Linux 2.6.38-gentoo-r6 x86_64 Gentoo [ 418.324] Current Operating System: Linux Pegaso 2.6.39-gentoo-r2 #2 SMP PREEMPT Fri Aug 5 03:23:31 CEST 2011 x86_64 [ 418.324] Kernel command line: root=/dev/sda7 softlevel=console vga=0x323 [ 418.324] Build Date: 02 August 2011 06:16:35PM [ 418.324] [ 418.324] Current version of pixman: 0.22.0 [ 418.324] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 418.324] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 418.324] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 12 18:40:10 2011 [ 418.324] (==) Using config file: "/etc/X11/xorg.conf" [ 418.324] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 418.324] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 418.325] (==) ServerLayout "aticonfig Layout" [ 418.325] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 418.325] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 418.325] (**) | |-->Device "aticonfig-Device[0]-0" [ 418.325] (==) Automatically adding devices [ 418.325] (==) Automatically enabling devices [ 418.325] (WW) The directory "/usr/share/fonts/TTF/" does not exist. [ 418.325] Entry deleted from font path. [ 418.325] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 418.325] Entry deleted from font path. [ 418.325] (WW) The directory "/usr/share/fonts/Type1/" does not exist. [ 418.325] Entry deleted from font path. [ 418.325] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 418.325] Entry deleted from font path. [ 418.325] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 418.325] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 418.325] Entry deleted from font path. [ 418.325] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 418.325] (==) FontPath set to: /usr/share/fonts/misc/ [ 418.325] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 418.325] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 418.325] (II) Loader magic: 0x7dd0a0 [ 418.326] (II) Module ABI versions: [ 418.326] X.Org ANSI C Emulation: 0.4 [ 418.326] X.Org Video Driver: 10.0 [ 418.326] X.Org XInput driver : 12.2 [ 418.326] X.Org Server Extension : 5.0 [ 418.328] (--) PCI:*(0:0:1:0) 1002:9802:1025:0521 rev 0, Mem @ 0xd0000000/268435456, 0xf0500000/262144, I/O @ 0x00005000/256 [ 418.328] (--) PCI: (0:1:0:0) 1002:6760:1025:0521 rev 0, Mem @ 0xe0000000/268435456, 0xf0400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072 [ 418.328] (II) Open ACPI successful (/var/run/acpid.socket) [ 418.328] (II) "extmod" will be loaded by default. [ 418.328] (II) "dbe" will be loaded by default. [ 418.328] (II) "glx" will be loaded by default. [ 418.328] (II) "record" will be loaded by default. [ 418.328] (II) "dri" will be loaded by default. [ 418.328] (II) "dri2" will be loaded by default. [ 418.328] (II) LoadModule: "extmod" [ 418.328] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so [ 418.329] (II) Module extmod: vendor="X.Org Foundation" [ 418.329] compiled for 1.10.2, module version = 1.0.0 [ 418.329] Module class: X.Org Server Extension [ 418.329] ABI class: X.Org Server Extension, version 5.0 [ 418.329] (II) Loading extension MIT-SCREEN-SAVER [ 418.329] (II) Loading extension XFree86-VidModeExtension [ 418.329] (II) Loading extension XFree86-DGA [ 418.329] (II) Loading extension DPMS [ 418.329] (II) Loading extension XVideo [ 418.329] (II) Loading extension XVideo-MotionCompensation [ 418.329] (II) Loading extension X-Resource [ 418.329] (II) LoadModule: "dbe" [ 418.329] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so [ 418.329] (II) Module dbe: vendor="X.Org Foundation" [ 418.329] compiled for 1.10.2, module version = 1.0.0 [ 418.330] Module class: X.Org Server Extension [ 418.330] ABI class: X.Org Server Extension, version 5.0 [ 418.330] (II) Loading extension DOUBLE-BUFFER [ 418.330] (II) LoadModule: "glx" [ 418.330] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 418.330] (II) Module glx: vendor="FireGL - ATI Technologies Inc." [ 418.330] compiled for 6.9.0, module version = 1.0.0 [ 418.331] (II) Loading extension GLX [ 418.331] (II) LoadModule: "record" [ 418.331] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so [ 418.331] (II) Module record: vendor="X.Org Foundation" [ 418.331] compiled for 1.10.2, module version = 1.13.0 [ 418.331] Module class: X.Org Server Extension [ 418.331] ABI class: X.Org Server Extension, version 5.0 [ 418.331] (II) Loading extension RECORD [ 418.331] (II) LoadModule: "dri" [ 418.332] (WW) Warning, couldn't open module dri [ 418.332] (II) UnloadModule: "dri" [ 418.332] (II) Unloading dri [ 418.332] (EE) Failed to load module "dri" (module does not exist, 0) [ 418.332] (II) LoadModule: "dri2" [ 418.332] (WW) Warning, couldn't open module dri2 [ 418.332] (II) UnloadModule: "dri2" [ 418.332] (II) Unloading dri2 [ 418.332] (EE) Failed to load module "dri2" (module does not exist, 0) [ 418.332] (II) LoadModule: "fglrx" [ 418.333] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so [ 418.366] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 418.366] compiled for 1.4.99.906, module version = 8.86.5 [ 418.366] Module class: X.Org Video Driver [ 418.367] (II) Loading sub module "fglrxdrm" [ 418.367] (II) LoadModule: "fglrxdrm" [ 418.367] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so [ 418.368] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 418.368] compiled for 1.4.99.906, module version = 8.86.5 [ 418.368] (II) ATI Proprietary Linux Driver Version Identifier:8.86.5 [ 418.368] (II) ATI Proprietary Linux Driver Release Identifier: 8.861 [ 418.368] (II) ATI Proprietary Linux Driver Build Date: May 24 2011 22:46:53 [ 418.368] (++) using VT number 7 [ 418.427] (WW) Falling back to old probe method for fglrx [ 418.440] (II) Loading PCS database from /etc/ati/amdpcsdb [ 418.441] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:0) found [ 418.441] (--) Chipset Supported AMD Graphics Processor (0x9802) found [ 418.442] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found [ 418.442] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found [ 418.442] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found [ 418.442] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found [ 418.442] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found [ 418.442] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found [ 418.442] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found [ 418.442] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found [ 418.442] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found [ 418.442] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found [ 418.442] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found [ 418.442] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:2) found [ 418.442] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:3) found [ 418.442] (**) ChipID override: 0x6760 [ 418.442] (**) Chipset Supported AMD Graphics Processor (0x6760) found [ 418.445] ukiDynamicMajor: found major device number 252 [ 418.445] ukiDynamicMajor: found major device number 252 [ 418.445] ukiOpenByBusid: Searching for BusID PCI:0:1:0 [ 418.445] ukiOpenDevice: node name is /dev/ati/card0 [ 418.445] ukiOpenDevice: open result is 8, (OK) [ 418.445] ukiOpenByBusid: ukiOpenMinor returns 8 [ 418.445] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0 [ 418.447] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 418.447] (II) AMD Video driver is signed [ 418.448] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so [ 418.448] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so [ 418.449] (II) fglrx(0): pEnt->device->identifier=0x804bc0 [ 418.450] (II) pEnt->device->identifier=(nil) [ 418.450] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin [ 418.450] (II) Loading sub module "vgahw" [ 418.450] (II) LoadModule: "vgahw" [ 418.450] (II) Loading /usr/lib64/xorg/modules/libvgahw.so [ 418.451] (II) Module vgahw: vendor="X.Org Foundation" [ 418.451] compiled for 1.10.2, module version = 0.1.0 [ 418.451] ABI class: X.Org Video Driver, version 10.0 [ 418.451] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 418.451] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 418.451] (==) fglrx(0): Default visual is TrueColor [ 418.451] (**) fglrx(0): Option "DPMS" "true" [ 418.451] (==) fglrx(0): RGB weight 888 [ 418.451] (II) fglrx(0): Using 8 bits per RGB [ 418.451] (==) fglrx(0): Buffer Tiling is ON [ 418.451] (II) Loading sub module "fglrxdrm" [ 418.451] (II) LoadModule: "fglrxdrm" [ 418.451] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so [ 418.451] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 418.451] compiled for 1.4.99.906, module version = 8.86.5 [ 418.454] ukiDynamicMajor: found major device number 252 [ 418.454] ukiDynamicMajor: found major device number 252 [ 418.454] ukiOpenByBusid: Searching for BusID PCI:0:1:0 [ 418.454] ukiOpenDevice: node name is /dev/ati/card0 [ 418.454] ukiOpenDevice: open result is 12, (OK) [ 418.454] ukiOpenByBusid: ukiOpenMinor returns 12 [ 418.454] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0 [ 418.454] ukiDynamicMajor: found major device number 252 [ 418.454] ukiDynamicMajor: found major device number 252 [ 418.454] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 418.455] ukiOpenDevice: node name is /dev/ati/card0 [ 418.455] ukiOpenDevice: open result is 13, (OK) [ 418.455] ukiOpenByBusid: ukiOpenMinor returns 13 [ 418.455] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0 [ 418.455] ukiOpenDevice: node name is /dev/ati/card1 [ 418.455] ukiOpenDevice: open result is 13, (OK) [ 418.455] ukiOpenByBusid: ukiOpenMinor returns 13 [ 418.455] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 418.455] (==) fglrx(0): NoAccel = NO [ 418.455] (==) fglrx(0): ATI 2D Acceleration Architecture enabled [ 418.455] (--) fglrx(0): Chipset: "AMD Radeon HD 6300 series Graphics" (Chipset = 0x9802) [ 418.455] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0521) [ 418.455] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI [ 418.455] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 [ 418.455] (--) fglrx(0): MMIO registers at 0xf0500000 [ 418.455] (--) fglrx(0): I/O port at 0x00005000 [ 418.455] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 418.526] (II) fglrx(0): ATIF platform detected [ 418.527] (II) fglrx(0): AC Adapter is used [ 418.564] (II) fglrx(0): Primary V_BIOS segment is: 0xc000 [ 418.566] (II) Loading sub module "vbe" [ 418.566] (II) LoadModule: "vbe" [ 418.567] (II) Loading /usr/lib64/xorg/modules/libvbe.so [ 418.567] (II) Module vbe: vendor="X.Org Foundation" [ 418.567] compiled for 1.10.2, module version = 1.1.0 [ 418.567] ABI class: X.Org Video Driver, version 10.0 [ 418.567] (II) fglrx(0): VESA BIOS detected [ 418.567] (II) fglrx(0): VESA VBE Version 3.0 [ 418.567] (II) fglrx(0): VESA VBE Total Mem: 16384 kB [ 418.567] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS [ 418.567] (II) fglrx(0): VESA VBE OEM Software Rev: 12.36 [ 418.567] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc. [ 418.567] (II) fglrx(0): VESA VBE OEM Product: WRESTLER [ 418.567] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 [ 418.586] (II) fglrx(0): ATI Video BIOS revision 9 or later detected [ 418.586] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3 [ 418.586] (II) fglrx(0): PCIE card detected [ 418.586] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 418.586] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 418.591] (II) fglrx(0): PowerXpress is enabled for AMD platform. [ 418.591] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0521) [ 418.591] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI [ 418.591] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000 [ 418.591] (--) fglrx(0): MMIO registers at 0xf0400000 [ 418.591] (--) fglrx(0): I/O port at 0x00004000 [ 418.591] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 426.859] (II) fglrx(0): ATI Video BIOS revision 9 or later detected [ 426.859] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3 [ 426.859] (II) fglrx(0): PCIE card detected [ 426.859] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 426.859] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 426.864] (II) fglrx(0): Using adapter: 0:1.0. [ 427.947] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x10000000) [ 427.989] (II) fglrx(0): Interrupt handler installed at IRQ 42. [ 427.989] (II) fglrx(0): Using adapter: 1:0.0. [ 428.110] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) [ 428.154] (II) fglrx(0): Interrupt handler installed at IRQ 43. [ 428.155] (II) fglrx(0): RandR 1.2 support is enabled! [ 428.155] (II) fglrx(0): RandR 1.2 rotation support is enabled! [ 428.155] (==) fglrx(0): Center Mode is disabled [ 428.155] (II) Loading sub module "fb" [ 428.155] (II) LoadModule: "fb" [ 428.155] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 428.156] (II) Module fb: vendor="X.Org Foundation" [ 428.156] compiled for 1.10.2, module version = 1.0.0 [ 428.156] ABI class: X.Org ANSI C Emulation, version 0.4 [ 428.156] (II) Loading sub module "ddc" [ 428.156] (II) LoadModule: "ddc" [ 428.156] (II) Module "ddc" already built-in [ 428.223] (II) fglrx(0): Finished Initialize PPLIB! [ 428.291] (WW) fglrx(0): Unable to register ADL handler for 0x00C00000 [ 428.291] (II) fglrx(0): Finished Initialize PPLIB! [ 428.291] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0 [ 428.291] (II) fglrx(0): Output DFP1 has no monitor section [ 428.291] (II) fglrx(0): Output CRT1 has no monitor section [ 428.291] (II) Loading sub module "ddc" [ 428.291] (II) LoadModule: "ddc" [ 428.291] (II) Module "ddc" already built-in [ 428.292] (II) fglrx(0): Connected Display0: LVDS [ 428.292] (II) fglrx(0): Display0 EDID data --------------------------- [ 428.292] (II) fglrx(0): Manufacturer: AUO Model: 26ec Serial#: 0 [ 428.292] (II) fglrx(0): Year: 2009 Week: 1 [ 428.292] (II) fglrx(0): EDID Version: 1.3 [ 428.292] (II) fglrx(0): Digital Display Input [ 428.292] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 428.292] (II) fglrx(0): Gamma: 2.20 [ 428.292] (II) fglrx(0): No DPMS capabilities specified [ 428.292] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 428.292] (II) fglrx(0): First detailed timing is preferred mode [ 428.292] (II) fglrx(0): redX: 0.577 redY: 0.333 greenX: 0.333 greenY: 0.554 [ 428.292] (II) fglrx(0): blueX: 0.161 blueY: 0.144 whiteX: 0.313 whiteY: 0.329 [ 428.292] (II) fglrx(0): Manufacturer's mask: 0 [ 428.292] (II) fglrx(0): Supported detailed timing: [ 428.292] (II) fglrx(0): clock: 71.8 MHz Image Size: 344 x 193 mm [ 428.292] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0 [ 428.292] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 784 v_border: 0 [ 428.292] (II) fglrx(0): Unknown vendor-specific block f [ 428.292] (II) fglrx(0): AUO [ 428.292] (II) fglrx(0): B156XW02 V6 [ 428.292] (II) fglrx(0): EDID (in hex): [ 428.292] (II) fglrx(0): 00ffffffffffff0006afec2600000000 [ 428.292] (II) fglrx(0): 01130103802213780ad7759355558d29 [ 428.292] (II) fglrx(0): 24505400000001010101010101010101 [ 428.292] (II) fglrx(0): 0101010101010c1c56a0500010303020 [ 428.292] (II) fglrx(0): 360058c1100000180000000f00000000 [ 428.292] (II) fglrx(0): 00000000000000000020000000fe0041 [ 428.292] (II) fglrx(0): 554f0a202020202020202020000000fe [ 428.292] (II) fglrx(0): 004231353658573032205636200a0065 [ 428.292] (II) fglrx(0): End of Display0 EDID data -------------------- [ 428.304] (II) fglrx(0): EDID for output LVDS [ 428.304] (II) fglrx(0): Manufacturer: AUO Model: 26ec Serial#: 0 [ 428.304] (II) fglrx(0): Year: 2009 Week: 1 [ 428.304] (II) fglrx(0): EDID Version: 1.3 [ 428.304] (II) fglrx(0): Digital Display Input [ 428.304] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 428.305] (II) fglrx(0): Gamma: 2.20 [ 428.305] (II) fglrx(0): No DPMS capabilities specified [ 428.305] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 428.305] (II) fglrx(0): First detailed timing is preferred mode [ 428.305] (II) fglrx(0): redX: 0.577 redY: 0.333 greenX: 0.333 greenY: 0.554 [ 428.305] (II) fglrx(0): blueX: 0.161 blueY: 0.144 whiteX: 0.313 whiteY: 0.329 [ 428.305] (II) fglrx(0): Manufacturer's mask: 0 [ 428.305] (II) fglrx(0): Supported detailed timing: [ 428.305] (II) fglrx(0): clock: 71.8 MHz Image Size: 344 x 193 mm [ 428.305] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0 [ 428.305] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 784 v_border: 0 [ 428.305] (II) fglrx(0): Unknown vendor-specific block f [ 428.305] (II) fglrx(0): AUO [ 428.305] (II) fglrx(0): B156XW02 V6 [ 428.305] (II) fglrx(0): EDID (in hex): [ 428.305] (II) fglrx(0): 00ffffffffffff0006afec2600000000 [ 428.305] (II) fglrx(0): 01130103802213780ad7759355558d29 [ 428.305] (II) fglrx(0): 24505400000001010101010101010101 [ 428.305] (II) fglrx(0): 0101010101010c1c56a0500010303020 [ 428.305] (II) fglrx(0): 360058c1100000180000000f00000000 [ 428.305] (II) fglrx(0): 00000000000000000020000000fe0041 [ 428.305] (II) fglrx(0): 554f0a202020202020202020000000fe [ 428.305] (II) fglrx(0): 004231353658573032205636200a0065 [ 428.305] (II) fglrx(0): EDID vendor "AUO", prod id 9964 [ 428.305] (II) fglrx(0): Printing DDC gathered Modelines: [ 428.305] (II) fglrx(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz) [ 428.305] (II) fglrx(0): Printing probed modes for output LVDS [ 428.305] (II) fglrx(0): Modeline "1366x768"x60.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz) [ 428.305] (II) fglrx(0): Modeline "1360x768"x60.0 71.80 1360 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz) [ 428.305] (II) fglrx(0): Modeline "1280x768"x60.0 71.80 1280 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz) [ 428.305] (II) fglrx(0): Modeline "1280x720"x60.0 71.80 1280 1414 1446 1526 720 771 777 784 -hsync -vsync (47.1 kHz) [ 428.305] (II) fglrx(0): Modeline "1024x768"x60.0 71.80 1024 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz) [ 428.305] (II) fglrx(0): Modeline "1024x600"x60.0 71.80 1024 1414 1446 1526 600 771 777 784 -hsync -vsync (47.1 kHz) [ 428.306] (II) fglrx(0): Modeline "800x600"x60.0 71.80 800 1414 1446 1526 600 771 777 784 -hsync -vsync (47.1 kHz) [ 428.306] (II) fglrx(0): Modeline "800x480"x60.0 71.80 800 1414 1446 1526 480 771 777 784 -hsync -vsync (47.1 kHz) [ 428.306] (II) fglrx(0): Modeline "640x480"x60.0 71.80 640 1414 1446 1526 480 771 777 784 -hsync -vsync (47.1 kHz) [ 428.306] (II) fglrx(0): EDID for output DFP1 [ 428.306] (II) fglrx(0): EDID for output CRT1 [ 428.306] (II) fglrx(0): Output LVDS connected [ 428.306] (II) fglrx(0): Output DFP1 disconnected [ 428.306] (II) fglrx(0): Output CRT1 disconnected [ 428.306] (II) fglrx(0): Using exact sizes for initial modes [ 428.306] (II) fglrx(0): Output LVDS using initial mode 1366x768 [ 428.306] (II) fglrx(0): Display dimensions: (340, 190) mm [ 428.306] (II) fglrx(0): DPI set to (102, 102) [ 428.306] (II) fglrx(0): Adapter AMD Radeon HD 6300 series Graphics has 2 configurable heads and 1 displays connected. [ 428.306] (==) fglrx(0): PseudoColor visuals disabled [ 428.306] (II) Loading sub module "ramdac" [ 428.306] (II) LoadModule: "ramdac" [ 428.306] (II) Module "ramdac" already built-in [ 428.306] (==) fglrx(0): NoDRI = NO [ 428.306] (==) fglrx(0): Capabilities: 0x00000000 [ 428.306] (==) fglrx(0): CapabilitiesEx: 0x00000000 [ 428.306] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" [ 428.306] (==) fglrx(0): UseFastTLS=0 [ 428.307] (==) fglrx(0): BlockSignalsOnLock=1 [ 428.307] (--) Depth 24 pixmap format is 32 bpp [ 428.307] (II) Loading extension ATIFGLRXDRI [ 428.307] (II) fglrx(0): doing swlDriScreenInit [ 428.307] (II) fglrx(0): swlDriScreenInit for fglrx driver [ 428.307] ukiDynamicMajor: found major device number 252 [ 428.307] ukiDynamicMajor: found major device number 252 [ 428.307] ukiDynamicMajor: found major device number 252 [ 428.307] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 428.307] ukiOpenDevice: node name is /dev/ati/card0 [ 428.307] ukiOpenDevice: open result is 18, (OK) [ 428.307] ukiOpenByBusid: ukiOpenMinor returns 18 [ 428.307] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0 [ 428.307] ukiOpenDevice: node name is /dev/ati/card1 [ 428.307] ukiOpenDevice: open result is 18, (OK) [ 428.307] ukiOpenByBusid: ukiOpenMinor returns 18 [ 428.307] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 428.308] (II) fglrx(0): [uki] DRM interface version 1.0 [ 428.308] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" [ 428.308] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x44000 [ 428.308] (II) fglrx(0): [uki] mapped SAREA 0x44000 to 0x7f403bdd1000 [ 428.308] (II) fglrx(0): [uki] framebuffer handle = 0x45000 [ 428.308] (II) fglrx(0): [uki] added 1 reserved context for kernel [ 428.308] (II) fglrx(0): swlDriScreenInit done [ 428.308] (II) fglrx(0): Kernel Module Version Information: [ 428.308] (II) fglrx(0): Name: fglrx [ 428.308] (II) fglrx(0): Version: 8.86.5 [ 428.308] (II) fglrx(0): Date: May 24 2011 [ 428.308] (II) fglrx(0): Desc: ATI FireGL DRM kernel module [ 428.308] (II) fglrx(0): Kernel Module version matches driver. [ 428.308] (II) fglrx(0): Kernel Module Build Time Information: [ 428.308] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.39-gentoo-r2 [ 428.308] (II) fglrx(0): Build-Kernel MODVERSIONS: no [ 428.308] (II) fglrx(0): Build-Kernel __SMP__: yes [ 428.308] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 [ 428.308] (II) fglrx(0): [uki] register handle = 0x00046000 [ 428.504] (II) fglrx(0): Static shadow buffer initialized. [ 428.505] (II) fglrx(0): DRI initialization successfull [ 428.505] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x009c4000 [ 428.506] (==) fglrx(0): Backing store disabled [ 428.506] (II) Loading extension FGLRXEXTENSION [ 428.506] (**) fglrx(0): DPMS enabled [ 428.506] (II) fglrx(0): Initialized in-driver Xinerama extension [ 428.506] (**) fglrx(0): Textured Video is enabled. [ 428.506] (II) LoadModule: "glesx" [ 428.507] (II) Loading /usr/lib64/xorg/modules/glesx.so [ 428.508] (II) Module glesx: vendor="X.Org Foundation" [ 428.508] compiled for 1.4.99.906, module version = 1.0.0 [ 428.508] (II) Loading extension GLESX [ 428.508] (II) fglrx(0): GLESX enableFlags = 848 [ 428.508] (II) fglrx(0): GLESX is enabled [ 428.508] (II) LoadModule: "amdxmm" [ 428.508] (II) Loading /usr/lib64/xorg/modules/amdxmm.so [ 428.509] (II) Module amdxmm: vendor="X.Org Foundation" [ 428.509] compiled for 1.4.99.906, module version = 2.0.0 [ 428.509] (II) Loading extension AMDXVOPL [ 428.509] (II) Loading extension AMDXVBA [ 428.511] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): [ 428.516] (II) fglrx(0): Enable composite support successfully [ 428.516] (WW) fglrx(0): Option "VendorName" is not used [ 428.516] (WW) fglrx(0): Option "ModelName" is not used [ 428.516] (II) fglrx(0): X context handle = 0x1 [ 428.516] (II) fglrx(0): [DRI] installation complete [ 428.516] (==) fglrx(0): Silken mouse enabled [ 428.517] (==) fglrx(0): Using HW cursor of display infrastructure! [ 428.517] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. [ 428.517] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel' [ 428.517] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel' [ 429.722] (--) RandR disabled [ 429.722] (II) Initializing built-in extension Generic Event Extension [ 429.722] (II) Initializing built-in extension SHAPE [ 429.722] (II) Initializing built-in extension MIT-SHM [ 429.722] (II) Initializing built-in extension XInputExtension [ 429.722] (II) Initializing built-in extension XTEST [ 429.722] (II) Initializing built-in extension BIG-REQUESTS [ 429.722] (II) Initializing built-in extension SYNC [ 429.722] (II) Initializing built-in extension XKEYBOARD [ 429.722] (II) Initializing built-in extension XC-MISC [ 429.722] (II) Initializing built-in extension XINERAMA [ 429.722] (II) Initializing built-in extension XFIXES [ 429.722] (II) Initializing built-in extension RENDER [ 429.722] (II) Initializing built-in extension RANDR [ 429.722] (II) Initializing built-in extension COMPOSITE [ 429.723] (II) Initializing built-in extension DAMAGE [ 429.727] ukiDynamicMajor: found major device number 252 [ 429.727] ukiDynamicMajor: found major device number 252 [ 429.727] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 429.727] ukiOpenDevice: node name is /dev/ati/card0 [ 429.727] ukiOpenDevice: open result is 19, (OK) [ 429.727] ukiOpenByBusid: ukiOpenMinor returns 19 [ 429.727] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0 [ 429.727] ukiOpenDevice: node name is /dev/ati/card1 [ 429.727] ukiOpenDevice: open result is 19, (OK) [ 429.727] ukiOpenByBusid: ukiOpenMinor returns 19 [ 429.727] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 429.942] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0 [ 429.969] (II) fglrx(0): Enable the clock gating! [ 429.969] (II) fglrx(0): Setting screen physical size to 361 x 203 [ 430.032] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 430.032] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 430.032] (**) Power Button: Applying InputClass "AT Translated Set 2 keyboard" [ 430.032] (II) LoadModule: "evdev" [ 430.032] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 430.033] (II) Module evdev: vendor="X.Org Foundation" [ 430.033] compiled for 1.10.2, module version = 2.6.0 [ 430.033] Module class: X.Org XInput Driver [ 430.033] ABI class: X.Org XInput driver, version 12.2 [ 430.033] (II) Using input driver 'evdev' for 'Power Button' [ 430.033] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 430.033] (**) Power Button: always reports core events [ 430.033] (**) Power Button: Device: "/dev/input/event5" [ 430.055] (--) Power Button: Found keys [ 430.055] (II) Power Button: Configuring as keyboard [ 430.055] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5" [ 430.055] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 430.055] (**) Option "xkb_rules" "evdev" [ 430.055] (**) Option "xkb_model" "evdev" [ 430.055] (**) Option "xkb_layout" "es" [ 430.055] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 430.409] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 430.409] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 430.409] (**) Power Button: Applying InputClass "AT Translated Set 2 keyboard" [ 430.409] (II) Using input driver 'evdev' for 'Power Button' [ 430.409] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 430.409] (**) Power Button: always reports core events [ 430.409] (**) Power Button: Device: "/dev/input/event2" [ 430.427] (--) Power Button: Found keys [ 430.427] (II) Power Button: Configuring as keyboard [ 430.427] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2" [ 430.427] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 430.427] (**) Option "xkb_rules" "evdev" [ 430.427] (**) Option "xkb_model" "evdev" [ 430.427] (**) Option "xkb_layout" "es" [ 430.427] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 430.428] (II) config/udev: Adding input device Lid Switch (/dev/input/event4) [ 430.428] (**) Lid Switch: Applying InputClass "AT Translated Set 2 keyboard" [ 430.428] (II) Using input driver 'evdev' for 'Lid Switch' [ 430.428] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 430.428] (**) Lid Switch: always reports core events [ 430.428] (**) Lid Switch: Device: "/dev/input/event4" [ 430.459] (WW) Lid Switch: Don't know how to use device [ 430.491] (EE) PreInit returned 8 for "Lid Switch" [ 430.491] (II) UnloadModule: "evdev" [ 430.491] (II) Unloading evdev [ 430.491] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 430.491] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 430.491] (**) Sleep Button: Applying InputClass "AT Translated Set 2 keyboard" [ 430.491] (II) Using input driver 'evdev' for 'Sleep Button' [ 430.491] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 430.492] (**) Sleep Button: always reports core events [ 430.492] (**) Sleep Button: Device: "/dev/input/event3" [ 430.523] (--) Sleep Button: Found keys [ 430.523] (II) Sleep Button: Configuring as keyboard [ 430.523] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3" [ 430.523] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) [ 430.523] (**) Option "xkb_rules" "evdev" [ 430.523] (**) Option "xkb_model" "evdev" [ 430.523] (**) Option "xkb_layout" "es" [ 430.523] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 430.529] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event6) [ 430.529] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall" [ 430.529] (**) Genius Optical Mouse: Applying InputClass "AT Translated Set 2 keyboard" [ 430.529] (II) Using input driver 'evdev' for 'Genius Optical Mouse' [ 430.529] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 430.529] (**) Genius Optical Mouse: always reports core events [ 430.529] (**) Genius Optical Mouse: Device: "/dev/input/event6" [ 430.555] (--) Genius Optical Mouse: Found 3 mouse buttons [ 430.555] (--) Genius Optical Mouse: Found scroll wheel(s) [ 430.555] (--) Genius Optical Mouse: Found relative axes [ 430.555] (--) Genius Optical Mouse: Found x and y relative axes [ 430.555] (II) Genius Optical Mouse: Configuring as mouse [ 430.555] (II) Genius Optical Mouse: Adding scrollwheel support [ 430.555] (**) Genius Optical Mouse: YAxisMapping: buttons 4 and 5 [ 430.555] (**) Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 430.555] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input6/event6" [ 430.555] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE) [ 430.555] (II) Genius Optical Mouse: initialized for relative axes. [ 430.555] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1 [ 430.556] (**) Genius Optical Mouse: (accel) acceleration profile 0 [ 430.556] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000 [ 430.556] (**) Genius Optical Mouse: (accel) acceleration threshold: 4 [ 430.556] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0) [ 430.556] (**) Genius Optical Mouse: Applying InputClass "AT Translated Set 2 keyboard" [ 430.556] (II) Using input driver 'evdev' for 'Genius Optical Mouse' [ 430.556] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 430.556] (**) Genius Optical Mouse: always reports core events [ 430.556] (**) Genius Optical Mouse: Device: "/dev/input/mouse0" [ 430.579] (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device [ 430.611] (EE) PreInit returned 8 for "Genius Optical Mouse" [ 430.611] (II) UnloadModule: "evdev" [ 430.611] (II) Unloading evdev [ 430.617] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1) [ 430.617] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 430.617] (**) AT Translated Set 2 keyboard: Applying InputClass "AT Translated Set 2 keyboard" [ 430.617] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 430.617] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 430.617] (**) AT Translated Set 2 keyboard: always reports core events [ 430.617] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1" [ 430.643] (--) AT Translated Set 2 keyboard: Found keys [ 430.643] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 430.643] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event1" [ 430.643] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 430.643] (**) Option "xkb_rules" "evdev" [ 430.643] (**) Option "xkb_model" "evdev" [ 430.643] (**) Option "xkb_layout" "es" [ 430.643] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 430.644] (II) config/udev: Adding input device PC Speaker (/dev/input/event0) [ 430.644] (**) PC Speaker: Applying InputClass "AT Translated Set 2 keyboard" [ 430.644] (II) Using input driver 'evdev' for 'PC Speaker' [ 430.644] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 430.644] (**) PC Speaker: always reports core events [ 430.644] (**) PC Speaker: Device: "/dev/input/event0" [ 430.667] (WW) PC Speaker: Don't know how to use device [ 430.731] (EE) PreInit returned 8 for "PC Speaker" [ 430.731] (II) UnloadModule: "evdev" [ 430.731] (II) Unloading evdev [ 430.795] (II) Power Button: Close [ 430.795] (II) UnloadModule: "evdev" [ 430.795] (II) Unloading evdev [ 430.827] (II) Power Button: Close [ 430.827] (II) UnloadModule: "evdev" [ 430.827] (II) Unloading evdev [ 430.859] (II) Sleep Button: Close [ 430.859] (II) UnloadModule: "evdev" [ 430.859] (II) Unloading evdev [ 430.923] (II) Genius Optical Mouse: Close [ 430.923] (II) UnloadModule: "evdev" [ 430.923] (II) Unloading evdev [ 430.955] (II) AT Translated Set 2 keyboard: Close [ 430.955] (II) UnloadModule: "evdev" [ 430.955] (II) Unloading evdev [ 430.962] (II) fglrx(0): Shutdown CMMQS [ 430.962] (II) fglrx(0): [uki] removed 1 reserved context for kernel [ 430.963] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x44000 at 0x7f403bdd1000 [ 431.077] (II) fglrx(0): Interrupt handler Shutdown. [ 431.078] (II) fglrx(0): Interrupt handler Shutdown.