dmesg output

out.txt (text/plain), 15.06 KB, created by Burhan Khalid on 2004-03-29 02:06:22 UTC

45EPI  0x20030630 MSFT 0x00000097) @ 0x1ff40000
ACPI: FADT (v001 INTEL  D845EPI  0x20030630 MSFT 0x00000097) @ 0x1ff40200
ACPI: MADT (v001 INTEL  D845EPI  0x20030630 MSFT 0x00000097) @ 0x1ff40300
ACPI: ASF! (v016 AMIASF I845GASF 0x00000001 MSFT 0x0100000d) @ 0x1ff44310
ACPI: DSDT (v001 INTEL  D845EPI  0x0000010a MSFT 0x0100000d) @ 0x00000000
Built 1 zonelists
Kernel command line: root=/dev/hda3 video=vesafb:ywrap,mtrr vga=0x31A
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 2666.707 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 513064k/523520k available (2977k kernel code, 9684k reserved, 1111k data, 156k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5259.26 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU:     After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU:     After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040116
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
vesafb: framebuffer at 0xf0000000, mapped to 0xe080a000, size 16384k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:e710
vesafb: pmi: set display start = c00ce755, set palette = c00ce7da
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=6553
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.13 <[e-mail]>
devfs: v1.22 (20021013) Richard Gooch ([e-mail])
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 [e-mail]).
NTFS driver 2.1.6 [Flags: R/O].
udf: registering filesystem
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
Console: switching to colour frame buffer device 160x64
pty: 256 Unix98 ptys configured
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] Initialized i830 1.3.2 20021108 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 [PCSPP(,...)]
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
via-rhine.c:v1.10-LK1.1.19-2.5  July-12-2003  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6105 Rhine-III at 0xfeaffc00, 00:0d:88:50:53:d6, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
hda: HDS722580VLAT20, ATA DISK drive
hdb: LTN526D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(33)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
hdb: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.00 loaded.
Console: switching to colour frame buffer device 160x64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 10, pci mem e1827c00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 0000e800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 5, io base 0000e880
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 9, io base 0000ec00
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 11
i2o: Checking for PCI I2O controllers...
I2O configuration manager v 0.04.
  (C) Copyright 1999 Red Hat Software
I2O Block Storage OSM v0.9
   (c) Copyright 1999-2001 Red Hat Software.
i2o_block: Checking for Boot device...
i2o_block: Checking for I2O Block devices...
i2o_scsi.c: Version 0.1.2
  chain_pool: 0 bytes @ c16f9ca0
  (512 byte buffers X 4 can_queue X 0 i2o controllers)
Advanced Linux Sound Architecture Driver Version 1.0.2c (Thu Feb 05 15:41:49 2004 UTC).
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49300 usecs
intel8x0: clocking to 48000
ALSA device list:
  #0: Intel 82801DB-ICH4 at 0xfebff800, irq 3
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
ip_conntrack version 2.1 (4090 buckets, 32720 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[e-mail]>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
found reiserfs format "3.6" with standard journal
usb 4-1: new low speed USB device using address 2
drivers/usb/input/hid-core.c: ctrl urb status -32 received
HID device not claimed by input or hiddev
hid: probe of 4-1:1.0 failed with error -5
Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda3) for (hda3)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 156k freed
Adding 506036k swap on /dev/hda2.  Priority:-1 extents:1
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
mtrr: 0xf0000000,0x4000000 overlaps existing 0xf0000000,0x1000000
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
mtrr: 0xf0000000,0x4000000 overlaps existing 0xf0000000,0x1000000
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
nvidia: no version magic, tainting kernel.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module  1.0-4496  Wed Jul 16 19:03:09 PDT 2003
Debug: sleeping function called from invalid context at mm/slab.c:1856
in_atomic():1, irqs_disabled():0
Call Trace:
 [<c011cc58>] __might_sleep+0xab/0xc9
 [<c013f081>] kmem_cache_alloc+0x6e/0x70
 [<c014d430>] __get_vm_area+0x24/0xf3
 [<c014d531>] get_vm_area+0x32/0x36
 [<c011a1a4>] __ioremap+0xb7/0x104
 [<c013bb25>] buffered_rmqueue+0xd4/0x16e
 [<c011a21c>] ioremap_nocache+0x2b/0xad
 [<e1b19444>] os_map_kernel_space+0x68/0x6c [nvidia]
 [<e1b2ba37>] __nvsym00568+0x1f/0x2c [nvidia]
 [<e1b2db56>] __nvsym00775+0x6e/0xe0 [nvidia]
 [<e1b2dbe6>] __nvsym00781+0x1e/0x190 [nvidia]
 [<c015bcb3>] cdev_get+0x55/0xb2
 [<e1b2f66c>] rm_init_adapter+0xc/0x10 [nvidia]
 [<e1b15ed7>] nv_kern_open+0xf3/0x228 [nvidia]
 [<c015bb56>] exact_match+0x0/0x5
 [<e1b15de4>] nv_kern_open+0x0/0x228 [nvidia]
 [<c015b976>] chrdev_open+0xed/0x214
 [<c01de386>] devfs_open+0xf0/0xf7
 [<c0151e77>] dentry_open+0x143/0x204
 [<c0151d32>] filp_open+0x62/0x64
 [<c015219e>] sys_open+0x5b/0x8b
 [<c010b277>] syscall_call+0x7/0xb

agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
Debug: sleeping function called from invalid context at mm/page_alloc.c:549
in_atomic():1, irqs_disabled():0
Call Trace:
 [<c011cc58>] __might_sleep+0xab/0xc9
 [<c013bf02>] __alloc_pages+0x343/0x348
 [<c0119518>] pte_alloc_one+0x1b/0x53
 [<c01435f2>] pte_alloc_map+0x41/0xcf
 [<c0144644>] remap_page_range+0xcf/0x1ea
 [<e1b18719>] KernMapAGPPages+0x48/0x87 [nvidia]
 [<e1b16326>] nv_kern_mmap+0x1eb/0x357 [nvidia]
 [<c0147138>] get_unmapped_area+0x8a/0x127
 [<c0146d23>] do_mmap_pgoff+0x324/0x6af
 [<c0110ee4>] sys_mmap2+0x9e/0xd3
 [<c010b277>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at mm/page_alloc.c:549
in_atomic():1, irqs_disabled():0
Call Trace:
 [<c011cc58>] __might_sleep+0xab/0xc9
 [<c013bf02>] __alloc_pages+0x343/0x348
 [<c0119518>] pte_alloc_one+0x1b/0x53
 [<c01435f2>] pte_alloc_map+0x41/0xcf
 [<c0144644>] remap_page_range+0xcf/0x1ea
 [<e1b18719>] KernMapAGPPages+0x48/0x87 [nvidia]
 [<e1b16326>] nv_kern_mmap+0x1eb/0x357 [nvidia]
 [<c0147138>] get_unmapped_area+0x8a/0x127
 [<c0146d23>] do_mmap_pgoff+0x324/0x6af
 [<c0110ee4>] sys_mmap2+0x9e/0xd3
 [<c010b277>] syscall_call+0x7/0xb

usb 4-1: USB disconnect, address 2
usb 4-1: new low speed USB device using address 3
HID device not claimed by input or hiddev
hid: probe of 4-1:1.0 failed with error -5
Debug: sleeping function called from invalid context at mm/slab.c:1856
in_atomic():1, irqs_disabled():0
Call Trace:
 [<c011cc58>] __might_sleep+0xab/0xc9
 [<c013f081>] kmem_cache_alloc+0x6e/0x70
 [<c014d430>] __get_vm_area+0x24/0xf3
 [<c014d531>] get_vm_area+0x32/0x36
 [<c011a1a4>] __ioremap+0xb7/0x104
 [<c013bb25>] buffered_rmqueue+0xd4/0x16e
 [<c011a21c>] ioremap_nocache+0x2b/0xad
 [<e1b19444>] os_map_kernel_space+0x68/0x6c [nvidia]
 [<e1b2ba37>] __nvsym00568+0x1f/0x2c [nvidia]
 [<e1b2db56>] __nvsym00775+0x6e/0xe0 [nvidia]
 [<e1b2dbe6>] __nvsym00781+0x1e/0x190 [nvidia]
 [<c015bcb3>] cdev_get+0x55/0xb2
 [<e1b2f66c>] rm_init_adapter+0xc/0x10 [nvidia]
 [<e1b15ed7>] nv_kern_open+0xf3/0x228 [nvidia]
 [<c015bb56>] exact_match+0x0/0x5
 [<e1b15de4>] nv_kern_open+0x0/0x228 [nvidia]
 [<c015b976>] chrdev_open+0xed/0x214
 [<c01de386>] devfs_open+0xf0/0xf7
 [<c0151e77>] dentry_open+0x143/0x204
 [<c0151d32>] filp_open+0x62/0x64
 [<c015219e>] sys_open+0x5b/0x8b
 [<c010b277>] syscall_call+0x7/0xb

agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.