raid configuration /etc/mdadm.conf

mdadm.conf (text/plain), 3.54 KB, created by Lyall Pearce on 2011-08-06 12:08:58 UTC

# mdadm configuration file
#
# mdadm will function properly without the use of a configuration file,
# but this file is useful for keeping track of arrays and member disks.
# In general, a mdadm.conf file is created, and updated, after arrays
# are created. This is the opposite behavior of /etc/raidtab which is
# created prior to array construction.
#
#
# the config file takes two types of lines:
#
#	DEVICE lines specify a list of devices of where to look for
#	  potential member disks
#
#	ARRAY lines specify information about how to identify arrays so
#	  so that they can be activated
#
# You can have more than one device line and use wild cards. The first 
# example includes SCSI the first partition of SCSI disks /dev/sdb,
# /dev/sdc, /dev/sdd, /dev/sdj, /dev/sdk, and /dev/sdl. The second 
# line looks for array slices on IDE disks.
#
# DEVICE /dev/sdb1 /dev/sdb3 /dev/sdb4 /dev/sdd1 /dev/sdd3 /dev/sdd4

#DEVICE /dev/sd[bcdjkl]1
#DEVICE /dev/hda1 /dev/hdb1
#
# If you mount devfs on /dev, then a suitable way to list all devices is:
#DEVICE /dev/discs/*/*
#
#
# The AUTO line can control which arrays get assembled by auto-assembly,
# meaing either "mdadm -As" when there are no 'ARRAY' lines in this file,
# or "mdadm --incremental" when the array found is not listed in this file.
# By default, all arrays that are found are assembled.
# If you want to ignore all DDF arrays (maybe they are managed by dmraid),
# and only assemble 1.x arrays if which are marked for 'this' homehost,
# but assemble all others, then use
#AUTO -ddf homehost -1.x +all
#
# ARRAY lines specify an array to assemble and a method of identification.
# Arrays can currently be identified by using a UUID, superblock minor number,
# or a listing of devices.
#
#	super-minor is usually the minor number of the metadevice
#	UUID is the Universally Unique Identifier for the array
# Each can be obtained using
#
# 	mdadm -D <md>
#
# Setup to have consistent device names by Lyall Pearce (LRP)
# boot
#    Number   Major   Minor   RaidDevice State
#       0       8       33        0      active sync   /dev/sdc1
#       1       8       49        1      active sync   /dev/sdd1
ARRAY /dev/md126 level=raid1 num-devices=2 UUID=057138d3:f4319c05:cb201669:f728008a
# root
#    Number   Major   Minor   RaidDevice State
#       0       8       35        0      active sync   /dev/sdc3
#       1       8       51        1      active sync   /dev/sdd3
ARRAY /dev/md127 level=raid1 num-devices=2 UUID=760bc9d5:49950dfb:cb201669:f728008a
# LVM
#    Number   Major   Minor   RaidDevice State
#       0       8       36        0      active sync   /dev/sdc4
#       1       8       52        1      active sync   /dev/sdd4
ARRAY /dev/md125 level=raid1 num-devices=2 UUID=2bcdd700:2336cb09:3b2cb14e:f587c0f3

#ARRAY /dev/md0 UUID=3aaa0122:29827cfa:5331ad66:ca767371
#ARRAY /dev/md1 super-minor=1
#ARRAY /dev/md2 devices=/dev/hda1,/dev/hdb1
#
# ARRAY lines can also specify a "spare-group" for each array.  mdadm --monitor
# will then move a spare between arrays in a spare-group if one array has a failed
# drive but no spare
#ARRAY /dev/md4 uuid=b23f3c6d:aec43a9f:fd65db85:369432df spare-group=group1
#ARRAY /dev/md5 uuid=19464854:03f71b1b:e0df2edd:246cc977 spare-group=group1
#
# When used in --follow (aka --monitor) mode, mdadm needs a
# mail address and/or a program.  This can be given with "mailaddr"
# and "program" lines to that monitoring can be started using
#    mdadm --follow --scan & echo $! > /var/run/mdadm
# If the lines are not found, mdadm will exit quietly
MAILADDR [e-mail]
#PROGRAM /usr/sbin/handle-mdadm-events