[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.39-gentoo-r3 (root@mustafa) (gcc version 4.4.5 (Gentoo 4.4.5 p1.3, pie-0.4.5) ) #10 SMP PREEMPT Tue Aug 2 10:10:39 PDT 2011 [ 0.000000] Command line: root=/dev/sda3 rootfstype=ext4 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA69GM-S2H/GA-MA69GM-S2H, BIOS F7e 11/18/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x128000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back [ 0.000000] 5 base 000120000000 mask FFFFF8000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000128000000 aka 4736M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfee0000 page 4k [ 0.000000] kernel direct mapping tables up to cfee0000 @ cfedd000-cfee0000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000128000000 [ 0.000000] 0100000000 - 0128000000 page 2M [ 0.000000] kernel direct mapping tables up to 128000000 @ 127ffe000-128000000 [ 0.000000] ACPI: RSDP 00000000000f6920 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfee30c0 0494D (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfee0000 00040 [ 0.000000] ACPI: SSDT 00000000cfee7b00 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfee83c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfee8400 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cfee7a40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000128000000 [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Initmem setup node 0 0000000000000000-0000000128000000 [ 0.000000] NODE_DATA [0000000127ff9000 - 0000000127ffdfff] [ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880123800000-ffff880126ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00128000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfee0 [ 0.000000] 0: 0x00100000 -> 0x00128000 [ 0.000000] On node 0 totalpages: 1015407 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31 [ 0.000000] Normal zone: 2240 pages used for memmap [ 0.000000] Normal zone: 161600 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000) [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff880127c00000 s73664 r8192 d20544 u524288 [ 0.000000] pcpu-alloc: s73664 r8192 d20544 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 998826 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda3 rootfstype=ext4 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c0000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c0000000 [ 0.000000] Memory: 3865660k/4849664k available (3533k kernel code, 788036k absent, 195968k reserved, 1812k data, 532k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: Unable to calibrate against PIT [ 0.000000] TSC: using HPET reference calibration [ 0.000000] Detected 3006.815 MHz processor. [ 0.005002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6013.63 BogoMIPS (lpj=3006815) [ 0.005149] pid_max: default: 32768 minimum: 301 [ 0.006018] Security Framework initialized [ 0.006387] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009231] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010440] Mount-cache hash table entries: 256 [ 0.010622] Initializing cgroup subsys ns [ 0.011003] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.011117] Initializing cgroup subsys cpuacct [ 0.011192] Initializing cgroup subsys devices [ 0.011264] Initializing cgroup subsys freezer [ 0.011355] tseg: 00cff00000 [ 0.011357] CPU: Physical Processor ID: 0 [ 0.011429] CPU: Processor Core ID: 0 [ 0.011501] mce: CPU supports 6 MCE banks [ 0.012036] ACPI: Core revision 20110316 [ 0.016052] Setting APIC routing to flat [ 0.016628] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.026718] CPU0: AMD Phenom(tm) II X4 945 Processor stepping 03 [ 0.026998] Performance Events: AMD PMU driver. [ 0.026998] ... version: 0 [ 0.026998] ... bit width: 48 [ 0.026998] ... generic registers: 4 [ 0.026998] ... value mask: 0000ffffffffffff [ 0.026998] ... max period: 00007fffffffffff [ 0.026998] ... fixed-purpose events: 0 [ 0.026998] ... event mask: 000000000000000f [ 0.032010] MCE: In-kernel MCE decoding enabled. [ 0.038023] Booting Node 0, Processors #1 [ 0.038089] smpboot cpu 1: start_ip = 9a000 [ 0.114027] #2 [ 0.114060] smpboot cpu 2: start_ip = 9a000 [ 0.190015] #3 Ok. [ 0.190089] smpboot cpu 3: start_ip = 9a000 [ 0.261980] Brought up 4 CPUs [ 0.262053] Total of 4 processors activated (24055.12 BogoMIPS). [ 0.264029] xor: automatically using best checksumming function: generic_sse [ 0.268857] generic_sse: 11928.000 MB/sec [ 0.268930] xor: using function: generic_sse (11928.000 MB/sec) [ 0.269001] NET: Registered protocol family 16 [ 0.269085] node 0 link 0: io port [d000, ffff] [ 0.269085] TOM: 00000000d8000000 aka 3456M [ 0.269085] Fam 10h mmconf [e0000000, e00fffff] [ 0.269085] node 0 link 0: mmio [a0000, bffff] [ 0.269085] node 0 link 0: mmio [d8000000, dfffffff] [ 0.269085] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.269085] node 0 link 0: mmio [e0000000, e02fffff] ==> [e0100000, e02fffff] [ 0.269085] TOM2: 0000000128000000 aka 4736M [ 0.269131] bus: [00, 02] on node 0 link 0 [ 0.269133] bus: 00 index 0 [io 0x0000-0xffff] [ 0.269134] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.269136] bus: 00 index 2 [mem 0xd8000000-0xdfffffff] [ 0.269138] bus: 00 index 3 [mem 0xe0300000-0xffffffff] [ 0.269139] bus: 00 index 4 [mem 0xe0100000-0xe02fffff] [ 0.269141] bus: 00 index 5 [mem 0x128000000-0xfcffffffff] [ 0.269151] Extended Config Space enabled on 1 nodes [ 0.269241] ACPI: bus type pci registered [ 0.269319] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.269319] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.292148] PCI: Using configuration type 1 for base access [ 0.295019] bio: create slab at 0 [ 0.311858] raid6: int64x1 2726 MB/s [ 0.328860] raid6: int64x2 3089 MB/s [ 0.345859] raid6: int64x4 2546 MB/s [ 0.362844] raid6: int64x8 2183 MB/s [ 0.379844] raid6: sse2x1 3933 MB/s [ 0.396839] raid6: sse2x2 6515 MB/s [ 0.413841] raid6: sse2x4 7140 MB/s [ 0.413913] raid6: using algorithm sse2x4 (7140 MB/s) [ 0.414425] ACPI: EC: Look up EC in DSDT [ 0.415108] ACPI: Executed 1 blocks of module-level executable AML code [ 0.419098] ACPI: Interpreter enabled [ 0.419171] ACPI: (supports S0 S3 S5) [ 0.419339] ACPI: Using IOAPIC for interrupt routing [ 0.427151] HEST: Table not found. [ 0.427151] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.427181] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.427278] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.427278] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.427946] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.428060] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.428174] pci_root PNP0A03:00: host bridge window [mem 0xd8000000-0xfebfffff] [ 0.428294] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 [ 0.428315] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 [ 0.428364] pci 0000:00:12.0: [1002:4380] type 0 class 0x000106 [ 0.428381] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07] [ 0.428391] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03] [ 0.428401] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07] [ 0.428411] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03] [ 0.428421] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f] [ 0.428431] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.428471] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 [ 0.428485] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.428548] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 [ 0.428562] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.428625] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 [ 0.428639] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff] [ 0.428702] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 [ 0.428715] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.428778] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 [ 0.428792] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.428861] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 [ 0.428880] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.428980] pci 0000:00:13.5: supports D1 D2 [ 0.428982] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.428986] pci 0000:00:13.5: PME# disabled [ 0.429006] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.429029] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] [ 0.429103] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 [ 0.429116] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.429126] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.429135] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.429145] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.429155] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f] [ 0.429190] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.429212] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.429271] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.429275] pci 0000:00:14.2: PME# disabled [ 0.429287] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 [ 0.429359] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.429403] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.429416] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.429426] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.429437] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.429449] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.429483] pci 0000:01:05.0: [1002:791e] type 0 class 0x000300 [ 0.429492] pci 0000:01:05.0: reg 10: [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.429497] pci 0000:01:05.0: reg 18: [mem 0xfdfe0000-0xfdfeffff 64bit] [ 0.429501] pci 0000:01:05.0: reg 20: [io 0xee00-0xeeff] [ 0.429505] pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff] [ 0.429516] pci 0000:01:05.0: supports D1 D2 [ 0.429524] pci 0000:01:05.2: [1002:7919] type 0 class 0x000403 [ 0.429532] pci 0000:01:05.2: reg 10: [mem 0xfdffc000-0xfdffffff 64bit] [ 0.429563] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.429637] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.429640] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff] [ 0.429643] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.429678] pci 0000:02:07.0: [4444:0016] type 0 class 0x000400 [ 0.429700] pci 0000:02:07.0: reg 10: [mem 0xf8000000-0xfbffffff pref] [ 0.429818] pci 0000:02:0e.0: [104c:8024] type 0 class 0x000c00 [ 0.429841] pci 0000:02:0e.0: reg 10: [mem 0xfddff000-0xfddff7ff] [ 0.429854] pci 0000:02:0e.0: reg 14: [mem 0xfddf8000-0xfddfbfff] [ 0.429935] pci 0000:02:0e.0: supports D1 D2 [ 0.429936] pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.429941] pci 0000:02:0e.0: PME# disabled [ 0.429963] pci 0000:02:0f.0: [10ec:8167] type 0 class 0x000200 [ 0.429985] pci 0000:02:0f.0: reg 10: [io 0xde00-0xdeff] [ 0.429997] pci 0000:02:0f.0: reg 14: [mem 0xfddfe000-0xfddfe0ff] [ 0.430051] pci 0000:02:0f.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.430074] pci 0000:02:0f.0: supports D1 D2 [ 0.430075] pci 0000:02:0f.0: PME# supported from D1 D2 D3hot D3cold [ 0.430080] pci 0000:02:0f.0: PME# disabled [ 0.430112] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode) [ 0.430189] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 0.430193] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.430197] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfbffffff pref] [ 0.430199] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.430201] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.430203] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.430205] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.430207] pci 0000:00:14.4: bridge window [mem 0xd8000000-0xfebfffff] (subtractive decode) [ 0.430217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.430329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.430385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.430408] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.430481] Unable to assume _OSC PCIe control. Disabling ASPM [ 0.440411] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.441225] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.441687] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.442134] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.442596] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.443034] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.443496] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.443966] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.446985] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.447067] vgaarb: loaded [ 0.447945] SCSI subsystem initialized [ 0.448021] libata version 3.00 loaded. [ 0.448021] PCI: Using ACPI for IRQ routing [ 0.448023] PCI: pci_cache_line_size set to 64 bytes [ 0.448087] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.448089] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff [ 0.448103] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.448189] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.449960] Switching to clocksource hpet [ 0.450975] Switched to NOHz mode on CPU #3 [ 0.450977] Switched to NOHz mode on CPU #2 [ 0.451862] Switched to NOHz mode on CPU #0 [ 0.451896] Switched to NOHz mode on CPU #1 [ 0.454758] pnp: PnP ACPI init [ 0.454834] ACPI: bus type pnp registered [ 0.454974] pnp 00:00: [bus 00-ff] [ 0.454976] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.454978] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.454983] pnp 00:00: [io 0x0d00-0xffff window] [ 0.454985] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.454987] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.454988] pnp 00:00: [mem 0xd8000000-0xfebfffff window] [ 0.455073] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.455080] pnp 00:01: [io 0x0010-0x001f] [ 0.455082] pnp 00:01: [io 0x0022-0x003f] [ 0.455083] pnp 00:01: [io 0x0044-0x005f] [ 0.455085] pnp 00:01: [io 0x0062-0x0063] [ 0.455086] pnp 00:01: [io 0x0065-0x006f] [ 0.455087] pnp 00:01: [io 0x0074-0x007f] [ 0.455089] pnp 00:01: [io 0x0091-0x0093] [ 0.455090] pnp 00:01: [io 0x00a2-0x00bf] [ 0.455092] pnp 00:01: [io 0x00e0-0x00ef] [ 0.455093] pnp 00:01: [io 0x04d0-0x04d1] [ 0.455095] pnp 00:01: [io 0x0220-0x0225] [ 0.455096] pnp 00:01: [io 0x0290-0x0294] [ 0.455163] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.455237] system 00:01: [io 0x0220-0x0225] has been reserved [ 0.455311] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.455384] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.455493] pnp 00:02: [io 0x4100-0x411f] [ 0.455495] pnp 00:02: [io 0x0228-0x022f] [ 0.455497] pnp 00:02: [io 0x040b] [ 0.455498] pnp 00:02: [io 0x04d6] [ 0.455499] pnp 00:02: [io 0x0c00-0x0c01] [ 0.455501] pnp 00:02: [io 0x0c14] [ 0.455502] pnp 00:02: [io 0x0c50-0x0c52] [ 0.455504] pnp 00:02: [io 0x0c6c-0x0c6d] [ 0.455505] pnp 00:02: [io 0x0c6f] [ 0.455506] pnp 00:02: [io 0x0cd0-0x0cd1] [ 0.455508] pnp 00:02: [io 0x0cd2-0x0cd3] [ 0.455509] pnp 00:02: [io 0x0cd4-0x0cdf] [ 0.455511] pnp 00:02: [io 0x4000-0x40fe] [ 0.455512] pnp 00:02: [io 0x4210-0x4217] [ 0.455514] pnp 00:02: [io 0x0b00-0x0b1f] [ 0.455515] pnp 00:02: [io 0x0070-0x0073] [ 0.455517] pnp 00:02: [io 0x0238-0x023f] [ 0.455518] pnp 00:02: [mem 0x00000000-0x00000fff window] [ 0.455520] pnp 00:02: [mem 0xfee00400-0xfee00fff window] [ 0.455545] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:02:0f.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.455767] system 00:02: [io 0x4100-0x411f] has been reserved [ 0.455842] system 00:02: [io 0x0228-0x022f] has been reserved [ 0.455915] system 00:02: [io 0x040b] has been reserved [ 0.455988] system 00:02: [io 0x04d6] has been reserved [ 0.456081] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.456154] system 00:02: [io 0x0c14] has been reserved [ 0.456226] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 0.456299] system 00:02: [io 0x0c6c-0x0c6d] has been reserved [ 0.456372] system 00:02: [io 0x0c6f] has been reserved [ 0.456445] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 0.456519] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 0.456592] system 00:02: [io 0x0cd4-0x0cdf] has been reserved [ 0.456665] system 00:02: [io 0x4000-0x40fe] has been reserved [ 0.456738] system 00:02: [io 0x4210-0x4217] has been reserved [ 0.456811] system 00:02: [io 0x0b00-0x0b1f] could not be reserved [ 0.456884] system 00:02: [io 0x0238-0x023f] has been reserved [ 0.456958] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.457092] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.457161] pnp 00:03: [dma 4] [ 0.457163] pnp 00:03: [io 0x0000-0x000f] [ 0.457164] pnp 00:03: [io 0x0080-0x0090] [ 0.457166] pnp 00:03: [io 0x0094-0x009f] [ 0.457167] pnp 00:03: [io 0x00c0-0x00df] [ 0.457251] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.457275] pnp 00:04: [irq 0 disabled] [ 0.457288] pnp 00:04: [irq 8] [ 0.457289] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.457340] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.457358] pnp 00:05: [io 0x0070-0x0073] [ 0.457409] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.457415] pnp 00:06: [io 0x0061] [ 0.457468] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.457474] pnp 00:07: [io 0x00f0-0x00ff] [ 0.457482] pnp 00:07: [irq 13] [ 0.457531] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.457839] pnp 00:08: [mem 0xe0000000-0xefffffff] [ 0.457907] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.457981] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.458090] pnp 00:09: [mem 0x000cd600-0x000cffff] [ 0.458092] pnp 00:09: [mem 0x000f0000-0x000f7fff] [ 0.458093] pnp 00:09: [mem 0x000f8000-0x000fbfff] [ 0.458095] pnp 00:09: [mem 0x000fc000-0x000fffff] [ 0.458096] pnp 00:09: [mem 0xcfee0000-0xcfefffff] [ 0.458098] pnp 00:09: [mem 0xffff0000-0xffffffff] [ 0.458100] pnp 00:09: [mem 0x00000000-0x0009ffff] [ 0.458101] pnp 00:09: [mem 0x00100000-0xcfedffff] [ 0.458103] pnp 00:09: [mem 0xcfff0000-0xd7feffff] [ 0.458104] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.458106] pnp 00:09: [mem 0xfee00000-0xfee00fff] [ 0.458108] pnp 00:09: [mem 0xfff80000-0xfffeffff] [ 0.458182] system 00:09: [mem 0x000cd600-0x000cffff] has been reserved [ 0.458257] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.458330] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.458403] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.458477] system 00:09: [mem 0xcfee0000-0xcfefffff] could not be reserved [ 0.458552] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved [ 0.458625] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.458699] system 00:09: [mem 0x00100000-0xcfedffff] could not be reserved [ 0.458773] system 00:09: [mem 0xcfff0000-0xd7feffff] could not be reserved [ 0.458847] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.458921] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.458995] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.459088] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.459101] pnp: PnP ACPI: found 10 devices [ 0.459173] ACPI: ACPI bus type pnp unregistered [ 0.463895] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.463969] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.464062] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff] [ 0.464139] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.464257] pci 0000:02:0f.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref] [ 0.464370] pci 0000:00:14.4: PCI bridge to [bus 02-02] [ 0.464444] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 0.464519] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.464595] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfbffffff pref] [ 0.464721] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.464723] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.464725] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.464726] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.464728] pci_bus 0000:00: resource 8 [mem 0xd8000000-0xfebfffff] [ 0.464730] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.464732] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff] [ 0.464734] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.464736] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.464738] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.464740] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xfbffffff pref] [ 0.464742] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.464744] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.464746] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.464748] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff] [ 0.464750] pci_bus 0000:02: resource 8 [mem 0xd8000000-0xfebfffff] [ 0.464776] NET: Registered protocol family 2 [ 0.464948] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.465903] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.468753] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.469238] TCP: Hash tables configured (established 524288 bind 65536) [ 0.469312] TCP reno registered [ 0.469391] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.469499] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.469684] NET: Registered protocol family 1 [ 0.535065] pci 0000:01:05.0: Boot video device [ 0.535076] PCI: CLS 4 bytes, default 64 [ 0.536193] PCI-DMA: Disabling AGP. [ 0.536361] PCI-DMA: aperture base @ c0000000 size 65536 KB [ 0.536434] PCI-DMA: using GART IOMMU. [ 0.536507] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.542143] audit: initializing netlink socket (disabled) [ 0.542226] type=2000 audit(1312305270.541:1): initialized [ 0.547113] msgmni has been set to 7678 [ 0.547664] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.547778] io scheduler noop registered [ 0.547850] io scheduler deadline registered [ 0.547977] io scheduler cfq registered (default) [ 0.548626] Linux agpgart interface v0.103 [ 0.548814] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.548930] ACPI: Power Button [PWRB] [ 0.549111] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.549226] ACPI: Power Button [PWRF] [ 0.549381] ACPI: acpi_idle registered with cpuidle [ 0.550535] ERST: Table is not found! [ 0.550941] ahci 0000:00:12.0: version 3.0 [ 0.550967] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.551111] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 0.551297] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.551412] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc [ 0.552371] scsi0 : ahci [ 0.552577] scsi1 : ahci [ 0.552763] scsi2 : ahci [ 0.552946] scsi3 : ahci [ 0.553209] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 0.553324] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 0.553442] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 0.553558] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 0.553995] console [netcon0] enabled [ 0.554104] netconsole: network logging started [ 0.554356] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.554858] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.554939] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.555253] mousedev: PS/2 mouse device common for all mice [ 0.555555] rtc_cmos 00:05: RTC can wake from S4 [ 0.559194] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.559301] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.559414] i2c /dev entries driver [ 0.559527] md: linear personality registered for level -1 [ 0.559600] md: raid0 personality registered for level 0 [ 0.559673] md: raid1 personality registered for level 1 [ 0.559746] md: raid10 personality registered for level 10 [ 0.559818] md: raid6 personality registered for level 6 [ 0.559891] md: raid5 personality registered for level 5 [ 0.559963] md: raid4 personality registered for level 4 [ 0.560268] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 0.560383] EDAC MC: Ver: 2.1.0 Jul 28 2011 [ 0.560621] AMD64 EDAC driver v3.4.0 [ 0.560731] EDAC amd64: DRAM ECC disabled. [ 0.560813] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 0.560814] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 0.560815] (Note that use of the override may cause unknown side effects.) [ 0.561271] cpuidle: using governor ladder [ 0.561345] cpuidle: using governor menu [ 0.561681] TCP cubic registered [ 0.561752] Initializing XFRM netlink socket [ 0.562060] NET: Registered protocol family 10 [ 0.562556] NET: Registered protocol family 17 [ 0.562631] NET: Registered protocol family 15 [ 0.562703] Registering the dns_resolver key type [ 0.562958] registered taskstats version 1 [ 0.563387] rtc_cmos 00:05: setting system clock to 2011-08-02 17:14:31 UTC (1312305271) [ 0.858071] ata3: SATA link down (SStatus 0 SControl 300) [ 0.858184] ata4: SATA link down (SStatus 0 SControl 300) [ 1.013063] ata2: softreset failed (device not ready) [ 1.013139] ata2: applying SB600 PMP SRST workaround and retrying [ 1.013228] ata1: softreset failed (device not ready) [ 1.013305] ata1: applying SB600 PMP SRST workaround and retrying [ 1.168075] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.168176] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.168879] ata2.00: ATA-8: ST3250310AS, 3.ADA, max UDMA/133 [ 1.168955] ata2.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.169055] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.169809] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.169883] ata2.00: configured for UDMA/133 [ 1.171461] ata1.00: ATA-8: WDC WD1500HLFS-01G6U4, 04.04V06, max UDMA/133 [ 1.171536] ata1.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.171611] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.174235] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.174310] ata1.00: configured for UDMA/133 [ 1.174522] scsi 0:0:0:0: Direct-Access ATA WDC WD1500HLFS-0 04.0 PQ: 0 ANSI: 5 [ 1.174841] sd 0:0:0:0: [sda] 293046768 512-byte logical blocks: (150 GB/139 GiB) [ 1.174973] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.175130] scsi 1:0:0:0: Direct-Access ATA ST3250310AS 3.AD PQ: 0 ANSI: 5 [ 1.175138] sd 0:0:0:0: [sda] Write Protect is off [ 1.175140] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.175150] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.175719] sd 1:0:0:0: [sdb] 488281250 512-byte logical blocks: (250 GB/232 GiB) [ 1.175752] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.178904] sd 1:0:0:0: [sdb] Write Protect is off [ 1.178984] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.178996] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.203203] sdb: sdb1 sdb2 [ 1.203345] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 1.203709] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.204050] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.204140] md: Waiting for all devices to be available before autodetect [ 1.204215] md: If you don't use raid, use raid=noautodetect [ 1.204419] md: Autodetecting RAID arrays. [ 1.204492] md: Scanned 0 and added 0 devices. [ 1.204563] md: autorun ... [ 1.204642] md: ... autorun DONE. [ 1.228941] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 1.229080] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. [ 1.229218] Freeing unused kernel memory: 532k freed [ 1.542030] Refined TSC clocksource calibration: 3006.818 MHz. [ 1.542111] Switching to clocksource tsc [ 2.406598] udev[741]: starting version 164 [ 2.982418] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 2.982555] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.992846] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.992870] r8169 0000:02:0f.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.992906] r8169 0000:02:0f.0: (unregistered net_device): no PCI Express capability [ 2.993307] r8169 0000:02:0f.0: eth0: RTL8169sc/8110sc at 0xffffc900110b8000, 00:1d:7d:90:18:83, XID 18000000 IRQ 23 [ 3.006828] firewire_ohci 0000:02:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 3.057105] firewire_ohci: Added fw-ohci device 0000:02:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 3.059626] [drm] Initialized drm 1.1.0 20060810 [ 3.068539] Linux video capture interface: v2.00 [ 3.107094] usbcore: registered new interface driver usbfs [ 3.107109] usbcore: registered new interface driver hub [ 3.107215] usbcore: registered new device driver usb [ 3.141304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.141384] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 3.141425] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 3.141434] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 3.145906] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 3.145920] ehci_hcd 0000:00:13.5: debug port 1 [ 3.145947] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 [ 3.151043] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 3.151061] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.151063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.151065] usb usb1: Product: EHCI Host Controller [ 3.151066] usb usb1: Manufacturer: Linux 2.6.39-gentoo-r3 ehci_hcd [ 3.151068] usb usb1: SerialNumber: 0000:00:13.5 [ 3.151140] hub 1-0:1.0: USB hub found [ 3.151143] hub 1-0:1.0: 10 ports detected [ 3.259633] [drm] radeon defaulting to kernel modesetting. [ 3.259635] [drm] radeon kernel modesetting enabled. [ 3.259727] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.259823] [drm] initializing kernel modesetting (RS690 0x1002:0x791E). [ 3.259858] [drm] register mmio base: 0xFDFE0000 [ 3.259860] [drm] register mmio size: 65536 [ 3.261685] ATOM BIOS: ATI [ 3.261698] radeon 0000:01:05.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used) [ 3.261701] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 3.261704] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 3.261705] [drm] Driver supports precise vblank timestamp query. [ 3.261725] [drm] radeon: irq initialized. [ 3.264329] [drm] Detected VRAM RAM=128M, BAR=128M [ 3.264333] [drm] RAM width 128bits DDR [ 3.264398] [TTM] Zone kernel: Available graphics memory: 1966072 kiB. [ 3.264399] [TTM] Initializing pool allocator. [ 3.264424] [drm] radeon: 128M of VRAM memory ready [ 3.264426] [drm] radeon: 512M of GTT memory ready. [ 3.264430] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 3.269749] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 3.283370] radeon 0000:01:05.0: WB enabled [ 3.283407] [drm] Loading RS690/RS740 Microcode [ 3.380397] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.380449] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.380473] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 3.380482] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 3.383058] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 3.438061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.438064] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.438066] usb usb2: Product: OHCI Host Controller [ 3.438068] usb usb2: Manufacturer: Linux 2.6.39-gentoo-r3 ohci_hcd [ 3.438069] usb usb2: SerialNumber: 0000:00:13.0 [ 3.438145] hub 2-0:1.0: USB hub found [ 3.438151] hub 2-0:1.0: 2 ports detected [ 3.438257] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.438281] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 3.438287] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 3.444240] ivtv: Start initialization, version 1.4.2 [ 3.444325] ivtv0: Initializing card 0 [ 3.444328] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 3.444399] ivtv 0000:02:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 3.444407] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 3.450050] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 3.453039] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 3.463164] [drm] radeon: ring at 0x00000000A0001000 [ 3.463182] [drm] ring test succeeded in 1 usecs [ 3.463283] [drm] radeon: ib pool ready. [ 3.463289] [drm] ib test succeeded in 0 usecs [ 3.463291] [drm] Enabling audio support [ 3.463298] failed to evaluate ATIF got AE_BAD_PARAMETER [ 3.463518] [drm] Radeon Display Connectors [ 3.463520] [drm] Connector 0: [ 3.463521] [drm] VGA [ 3.463523] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [ 3.463524] [drm] Encoders: [ 3.463525] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.463526] [drm] Connector 1: [ 3.463527] [drm] S-video [ 3.463528] [drm] Encoders: [ 3.463529] [drm] TV1: INTERNAL_KLDSCP_DAC1 [ 3.463530] [drm] Connector 2: [ 3.463531] [drm] HDMI-A [ 3.463533] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c [ 3.463534] [drm] Encoders: [ 3.463535] [drm] DFP3: INTERNAL_LVTM1 [ 3.505045] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.505047] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.505049] usb usb3: Product: OHCI Host Controller [ 3.505051] usb usb3: Manufacturer: Linux 2.6.39-gentoo-r3 ohci_hcd [ 3.505052] usb usb3: SerialNumber: 0000:00:13.1 [ 3.505106] hub 3-0:1.0: USB hub found [ 3.505112] hub 3-0:1.0: 2 ports detected [ 3.512022] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.512041] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 3.512047] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 3.518026] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 3.555886] tveeprom 0-0050: Hauppauge model 32552, rev B123, serial# 7137323 [ 3.555889] tveeprom 0-0050: tuner model is Philips FM1236 (idx 23, type 2) [ 3.555891] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) [ 3.555893] tveeprom 0-0050: audio processor is MSP4448 (idx 27) [ 3.555895] tveeprom 0-0050: decoder processor is SAA7115 (idx 19) [ 3.555896] tveeprom 0-0050: has radio [ 3.555898] ivtv0: Autodetected Hauppauge WinTV PVR-250 [ 3.558078] firewire_core: created device fw0: GUID 001a4d0000ed1884, S400 [ 3.559128] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 3.573034] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.573036] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.573038] usb usb4: Product: OHCI Host Controller [ 3.573040] usb usb4: Manufacturer: Linux 2.6.39-gentoo-r3 ohci_hcd [ 3.573041] usb usb4: SerialNumber: 0000:00:13.2 [ 3.573091] hub 4-0:1.0: USB hub found [ 3.573096] hub 4-0:1.0: 2 ports detected [ 3.576948] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.576958] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 3.576963] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 3.582048] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 3.638058] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.638061] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.638063] usb usb5: Product: OHCI Host Controller [ 3.638065] usb usb5: Manufacturer: Linux 2.6.39-gentoo-r3 ohci_hcd [ 3.638066] usb usb5: SerialNumber: 0000:00:13.3 [ 3.638136] hub 5-0:1.0: USB hub found [ 3.638142] hub 5-0:1.0: 2 ports detected [ 3.638242] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.638260] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 3.638266] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 3.648042] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 3.717037] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.717040] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.717041] usb usb6: Product: OHCI Host Controller [ 3.717043] usb usb6: Manufacturer: Linux 2.6.39-gentoo-r3 ohci_hcd [ 3.717044] usb usb6: SerialNumber: 0000:00:13.4 [ 3.717099] hub 6-0:1.0: USB hub found [ 3.717104] hub 6-0:1.0: 2 ports detected [ 3.724030] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.724034] hda_intel: position_fix set to 1 for device 1458:a022 [ 3.750833] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) [ 3.935344] [drm] fb mappable at 0xD8040000 [ 3.935345] [drm] vram apper at 0xD8000000 [ 3.935347] [drm] size 7258112 [ 3.935348] [drm] fb depth is 24 [ 3.935349] [drm] pitch is 6912 [ 3.935379] fbcon: radeondrmfb (fb0) is primary device [ 3.971994] Console: switching to colour frame buffer device 210x65 [ 4.004862] fb0: radeondrmfb frame buffer device [ 4.004863] drm: registered panic notifier [ 4.004868] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:05.0 on minor 0 [ 4.007911] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.007955] HDA Intel 0000:01:05.2: irq 40 for MSI/MSI-X [ 4.015828] i2c-core: driver [msp3400] using legacy suspend method [ 4.015831] i2c-core: driver [msp3400] using legacy resume method [ 4.042517] msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) [ 4.042520] msp3400 0-0040: msp3400 supports radio, mode is autodetect and autoselect [ 4.047029] usb 2-1: new low speed USB device number 2 using ohci_hcd [ 4.050788] i2c-core: driver [tuner] using legacy suspend method [ 4.050790] i2c-core: driver [tuner] using legacy resume method [ 4.053475] tuner 0-0061: Tuner -1 found with type(s) Radio TV. [ 4.067269] tuner-simple 0-0061: creating new instance [ 4.067271] tuner-simple 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) [ 4.068881] ivtv0: Registered device video0 for encoder MPG (4096 kB) [ 4.068895] ivtv0: Registered device video32 for encoder YUV (2048 kB) [ 4.068907] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) [ 4.068919] ivtv0: Registered device video24 for encoder PCM (320 kB) [ 4.068935] ivtv0: Registered device radio0 for encoder radio [ 4.068937] ivtv0: Initialized card: Hauppauge WinTV PVR-250 [ 4.068980] ivtv: End initialization [ 4.200074] usb 2-1: New USB device found, idVendor=2222, idProduct=3061 [ 4.200077] usb 2-1: New USB device strings: Mfr=7, Product=3, SerialNumber=0 [ 4.200079] usb 2-1: Product: Evoluent VerticalMouse 2 [ 4.200081] usb 2-1: Manufacturer: Kingsis Peripherals [ 4.222187] input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input3 [ 4.222244] generic-usb 0003:2222:3061.0001: input,hidraw0: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:13.0-1/input0 [ 4.222258] usbcore: registered new interface driver usbhid [ 4.222260] usbhid: USB HID core driver [ 4.325031] usb 2-2: new low speed USB device number 3 using ohci_hcd [ 4.494074] usb 2-2: New USB device found, idVendor=045e, idProduct=00db [ 4.494077] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.494079] usb 2-2: Product: Natural® Ergonomic Keyboard 4000 [ 4.494080] usb 2-2: Manufacturer: Microsoft [ 4.518088] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input4 [ 4.518154] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:13.0-2/input0 [ 4.532193] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.1/input/input5 [ 4.532248] microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:13.0-2/input1 [ 4.619031] usb 3-2: new full speed USB device number 2 using ohci_hcd [ 4.730878] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 4.793062] usb 3-2: New USB device found, idVendor=03f0, idProduct=3002 [ 4.793065] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.793067] usb 3-2: Product: PhotoSmart P1000 [ 4.793068] usb 3-2: Manufacturer: Hewlett-Packard [ 4.793070] usb 3-2: SerialNumber: MX9AR1D1H9HP [ 4.804097] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3002 [ 4.804112] usbcore: registered new interface driver usblp [ 4.930223] ivtv0: Encoder revision: 0x02060039 [ 6.564121] firewire_core: created device fw1: GUID 0090a95000003a38, S400, 1 config ROM retries [ 6.573095] scsi4 : SBP-2 IEEE-1394 [ 6.573138] firewire_sbp2: Workarounds for fw1.0: 0x2 (firmware_revision 0x000223, model_id 0x000000) [ 6.773505] firewire_sbp2: fw1.0: logged in to LUN 0000 (0 retries) [ 6.775396] scsi 4:0:0:0: Direct-Access-RBC WD 3200JB External 2.23 PQ: 0 ANSI: 4 [ 6.775519] sd 4:0:0:0: Attached scsi generic sg2 type 14 [ 6.776934] sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 6.778253] sd 4:0:0:0: [sdc] Write Protect is off [ 6.778256] sd 4:0:0:0: [sdc] Mode Sense: 0c 00 00 00 [ 6.780977] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.014004] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 8.015005] hda-intel: No response from codec, disabling MSI: last cmd=0x000f0000 [ 9.016007] hda-intel: Codec #0 probe error; disabling it... [ 10.021003] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0000 [ 12.783716] sdc: sdc1 [ 12.794922] sd 4:0:0:0: [sdc] Attached SCSI disk [ 13.942205] powernow-k8: Found 1 AMD Phenom(tm) II X4 945 Processor (4 cpu cores) (version 2.20.00) [ 13.942240] powernow-k8: 0 : pstate 0 (3000 MHz) [ 13.942242] powernow-k8: 1 : pstate 1 (2300 MHz) [ 13.942243] powernow-k8: 2 : pstate 2 (1800 MHz) [ 13.942245] powernow-k8: 3 : pstate 3 (800 MHz) [ 14.002411] fuse init (API version 7.16) [ 14.938883] EXT4-fs (sda3): re-mounted. Opts: (null) [ 15.038259] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 15.060337] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 15.104490] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 15.111540] EXT3-fs: barriers not enabled [ 15.122676] kjournald starting. Commit interval 5 seconds [ 15.122990] EXT3-fs (sdb1): using internal journal [ 15.122994] EXT3-fs (sdb1): mounted filesystem with ordered data mode [ 16.020632] r8169 0000:02:0f.0: eth0: link down [ 16.021110] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.964648] r8169 0000:02:0f.0: eth0: link up [ 18.965073] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 28.564102] Adding 524284k swap on /dev/sda2. Priority:-1 extents:1 across:524284k [ 28.822418] ------------[ cut here ]------------ [ 28.822425] WARNING: at kernel/printk.c:293 do_syslog+0x83/0x433() [ 28.822427] Hardware name: GA-MA69GM-S2H [ 28.822428] Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG (deprecated). [ 28.822430] Modules linked in: snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss fuse cpufreq_conservative cpufreq_ondemand cpufreq_performance powernow_k8 freq_table mperf snd_hda_codec_hdmi firewire_sbp2 usblp joydev hid_microsoft usbhid tuner_simple tuner_types tuner msp3400 snd_hda_codec_realtek saa7115 snd_hda_intel snd_hda_codec ivtv ohci_hcd radeon ttm ehci_hcd drm_kms_helper snd_hwdep cx2341x usbcore snd_pcm snd_timer v4l2_common snd videodev drm backlight i2c_algo_bit cfbcopyarea soundcore firewire_ohci cfbimgblt snd_page_alloc r8169 cfbfillrect v4l2_compat_ioctl32 pcspkr pata_acpi mii firewire_core k10temp tveeprom [ 28.822462] Pid: 1664, comm: syslog-ng Not tainted 2.6.39-gentoo-r3 #10 [ 28.822464] Call Trace: [ 28.822468] [] ? warn_slowpath_common+0x78/0x8c [ 28.822472] [] ? read_vmcore+0x19d/0x19d [ 28.822475] [] ? warn_slowpath_fmt+0x45/0x4a [ 28.822477] [] ? do_syslog+0x83/0x433 [ 28.822480] [] ? d_rehash+0x1d/0x28 [ 28.822483] [] ? _raw_spin_unlock+0x1e/0x2b [ 28.822485] [] ? proc_lookup_de+0x9f/0xb7 [ 28.822488] [] ? read_vmcore+0x19d/0x19d [ 28.822491] [] ? proc_reg_open+0xa1/0x141 [ 28.822493] [] ? kmsg_release+0x18/0x18 [ 28.822495] [] ? proc_fill_super+0xa1/0xa1 [ 28.822498] [] ? __dentry_open+0x18b/0x2b6 [ 28.822500] [] ? do_last+0x44e/0x548 [ 28.822502] [] ? path_openat+0xc6/0x317 [ 28.822504] [] ? _raw_spin_unlock+0x1e/0x2b [ 28.822507] [] ? fsnotify_clear_marks_by_inode+0x87/0xc4 [ 28.822509] [] ? do_filp_open+0x2c/0x72 [ 28.822512] [] ? _raw_spin_unlock+0x1e/0x2b [ 28.822514] [] ? alloc_fd+0x110/0x122 [ 28.822516] [] ? do_sys_open+0x61/0xe8 [ 28.822519] [] ? system_call_fastpath+0x16/0x1b [ 28.822520] ---[ end trace d9c6fd7279ebab1d ]--- [ 29.548024] eth0: no IPv6 routers present [ 33.252656] it87: Found IT8716F chip at 0x228, revision 3 [ 33.252676] it87: Beeping is supported [ 52.656782] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 52.659667] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 52.659678] ata1.00: configured for UDMA/133 [ 52.659689] ata1: EH complete [ 53.212857] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 53.213625] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 53.213634] ata2.00: configured for UDMA/133 [ 53.213644] ata2: EH complete [ 53.598723] EXT4-fs (sda3): re-mounted. Opts: commit=0 [ 53.737769] EXT4-fs (sda5): re-mounted. Opts: commit=0 [ 53.952146] EXT4-fs (sda6): re-mounted. Opts: commit=0 [ 54.199254] EXT4-fs (sda7): re-mounted. Opts: commit=0 [55396.974974] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55399.303156] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55399.335158] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55399.343155] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55399.351159] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55399.383160] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55399.391163] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55399.399164] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55399.407158] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55399.767192] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55399.775195] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55399.783194] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55399.791194] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55400.279220] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55400.615256] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55400.623260] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55400.631261] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55400.639262] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55400.647262] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55400.679247] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55400.687266] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55400.695246] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55400.703268] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip [55400.711267] [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip