dmesg with kernel modesetting disabled

dmesg-nomodeset.log (text/plain), 24.33 KB, created by Homer on 2011-08-01 13:14:59 UTC

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38-gentoo-r1-scooby2 (root@Scooby) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #1 Fri Apr 15 00:44:48 BST 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ce000 - 00000000000d2000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
 BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU!
DMI 2.3 present.
DMI: NEC CI                           MS-6506                         /MS-6506                         , BIOS 07.00T                           04/02/2001
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3fff0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 base 0E0000000 mask FFC000000 write-combining
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Warning only 895MB will be used.
Use a HIGHMEM enabled kernel.
found SMP MP-table at [c00fb900] fb900
initial memory mapped : 0 - 01c00000
init_memory_mapping: 0000000000000000-0000000037fa1000
 0000000000 - 0000200000 page 4k
 0000200000 - 0037e00000 page 2M
 0037e00000 - 0037fa1000 page 4k
kernel direct mapping tables up to 37fa1000 @ 1bfb000-1c00000
RAMDISK: 37cfd000 - 37ff0000
Allocated new RAMDISK: 37a0a000 - 37cfc14f
Move RAMDISK from 0000000037cfd000 - 0000000037fef14e to 37a0a000 - 37cfc14e
ACPI: RSDP 000fa210 00014 (v00 AMI   )
ACPI: RSDT 3fff0000 0002C (v01 AMIINT INTEL845 00000010 MSFT 00000097)
ACPI: FACP 3fff0030 00081 (v01 AMIINT INTEL845 00000011 MSFT 00000097)
ACPI: DSDT 3fff0120 033F2 (v01  INTEL BROKDALE 00001000 MSFT 0100000D)
ACPI: FACS 3fff8000 00040
ACPI: APIC 3fff00c0 00054 (v01 AMIINT          00000009 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
895MB LOWMEM available.
  mapped low ram: 0 - 37fa1000
  low ram: 0 - 37fa1000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x00037fa1
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x00037fa1
On node 0 totalpages: 229168
free_area_init_node: node 0, pgdat c157b540, node_mem_map f730a200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223425 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
nr_irqs_gsi: 40
Allocating PCI resources starting at 40000000 (gap: 40000000:bff00000)
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227376
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 crypt_root=/dev/sda2 root_key=Do.key root_keydev=LABEL=keys dolvm real_root=LABEL=scoobyroot video=1024x768M@85m splash=silent,theme:natural_gentoo console=tty1 quiet nomodeset
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Memory: 899076k/917124k available (4025k kernel code, 17596k reserved, 1605k data, 464k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffa3000 - 0xfffff000   ( 368 kB)
    vmalloc : 0xf87a1000 - 0xfffa1000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7fa1000   ( 895 MB)
      .init : 0xc1580000 - 0xc15f4000   ( 464 kB)
      .data : 0xc13ee44f - 0xc157f900   (1605 kB)
      .text : 0xc1000000 - 0xc13ee44f   (4025 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:2304 nr_irqs:256 16
CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
Console: colour VGA+ 80x25
console [tty1] enabled
Fast TSC calibration using PIT
Detected 1694.040 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3388.08 BogoMIPS (lpj=1694040)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02
ACPI: Core revision 20110112
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version:                0
... bit width:              40
... generic registers:      18
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   0
... event mask:             000000000003ffff
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
devtmpfs: initialized
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffdfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored)
pci 0000:00:00.0: [8086:1a30] type 0 class 0x000600
pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe3ffffff pref]
pci 0000:00:01.0: [8086:1a31] type 1 class 0x000604
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2440] type 0 class 0x000601
pci 0000:00:1f.1: [8086:244b] type 0 class 0x000101
pci 0000:00:1f.1: reg 20: [io  0xfc00-0xfc0f]
pci 0000:00:1f.2: [8086:2442] type 0 class 0x000c03
pci 0000:00:1f.2: reg 20: [io  0xe000-0xe01f]
pci 0000:00:1f.3: [8086:2443] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io  0x0c00-0x0c0f]
pci 0000:00:1f.4: [8086:2444] type 0 class 0x000c03
pci 0000:00:1f.4: reg 20: [io  0xe400-0xe41f]
pci 0000:00:1f.5: [8086:2445] type 0 class 0x000401
pci 0000:00:1f.5: reg 10: [io  0xec00-0xecff]
pci 0000:00:1f.5: reg 14: [io  0xe800-0xe83f]
pci 0000:01:00.0: [1002:4150] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:01:00.0: reg 14: [io  0xa800-0xa8ff]
pci 0000:01:00.0: reg 18: [mem 0xdfdf0000-0xdfdfffff]
pci 0000:01:00.0: reg 30: [mem 0xdfdc0000-0xdfddffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:4170] type 0 class 0x000380
pci 0000:01:00.1: reg 10: [mem 0xb0000000-0xbfffffff pref]
pci 0000:01:00.1: reg 14: [mem 0xdfde0000-0xdfdeffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:01.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:01.0:   bridge window [mem 0x9fa00000-0xdfafffff pref]
pci 0000:02:00.0: [1814:0201] type 0 class 0x000280
pci 0000:02:00.0: reg 10: [mem 0xdfefe000-0xdfefffff]
pci 0000:02:01.0: [1113:1211] type 0 class 0x000200
pci 0000:02:01.0: reg 10: [io  0xbc00-0xbcff]
pci 0000:02:01.0: reg 14: [mem 0xdfefdf00-0xdfefdfff]
pci 0000:02:01.0: reg 30: [mem 0xdfec0000-0xdfedffff pref]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1e.0:   bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:1e.0:   bridge window [mem 0xdfb00000-0xdfbfffff pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 9) *11
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 000000003fff0000 - 000000003fffffff 
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x40000000-0xffdfffff window]
pnp 00:00: [mem 0xfee01000-0xffdfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0xffb00000-0xffbfffff]
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0081-0x0083]
pnp 00:02: [io  0x0087]
pnp 00:02: [io  0x0089-0x008b]
pnp 00:02: [io  0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io  0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io  0x0060]
pnp 00:06: [io  0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:07: [io  0x03f2-0x03f3]
pnp 00:07: [io  0x03f4-0x03f5]
pnp 00:07: [io  0x03f7]
pnp 00:07: [irq 6]
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: [io  0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io  0x02f8-0x02ff]
pnp 00:09: [irq 3]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io  0x0378-0x037f]
pnp 00:0a: [io  0x0778-0x077b]
pnp 00:0a: [irq 7]
pnp 00:0a: [dma 3]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0b: [io  0x0200-0x0207]
pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
pnp 00:0c: [io  0x0330-0x0331]
pnp 00:0c: [irq 5]
pnp 00:0c: Plug and Play ACPI device, IDs PNPb006 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:01.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:01.0:   bridge window [mem 0x9fa00000-0xdfafffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 02-02]
pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1e.0:   bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:1e.0:   bridge window [mem 0xdfb00000-0xdfbfffff pref]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:01: resource 2 [mem 0x9fa00000-0xdfafffff pref]
pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
pci_bus 0000:02: resource 2 [mem 0xdfb00000-0xdfbfffff pref]
pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Switched to NOHz mode on CPU #0
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3020k freed
microcode: CPU0 sig=0xf12, pf=0x4, revision=0x28
microcode: Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
Intel AES-NI instructions are not detected.
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching
msgmni has been set to 1761
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel i845 Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[drm] Initialized drm 1.1.0 20060810
[drm] VGACON disable radeon kernel modesetting.
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
brd: module loaded
loop: module loaded
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
SCSI Media Changer driver v0.25 
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
cpuidle: using governor ladder
cpuidle: using governor menu
ioatdma: Intel(R) QuickData Technology Driver 4.00
Loading crystalhd 0.9.27
Netfilter messages via NETLINK v0.30.
TCP vegas registered
TCP yeah registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Bridge firewalling registered
Registering the dns_resolver key type
Using IPI Shortcut mode
Freeing unused kernel memory: 464k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Refined TSC clocksource calibration: 1693.721 MHz.
Switching to clocksource tsc
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata2.00: ATAPI: TSSTcorp CDDVDW SH-S222L, SB03, max UDMA/66
ata2.00: configured for UDMA/66
ata1.00: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKB-0 05.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S222L  SB03 PQ: 0 ANSI: 5
 sda: sda1 sda2
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sd 0:0:0:0: [sda] Attached SCSI disk
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
GDT-HA: Storage RAID Controller Driver. Version: 3.05
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
usbcore: registered new interface driver libusual
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1f.2: setting latency timer to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000e000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38-gentoo-r1-scooby2 uhci_hcd
usb usb1: SerialNumber: 0000:00:1f.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1f.4: setting latency timer to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000e400
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38-gentoo-r1-scooby2 uhci_hcd
usb usb2: SerialNumber: 0000:00:1f.4
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
usb 1-2: new low speed USB device using uhci_hcd and address 2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [e-mail]
usb 1-2: New USB device found, idVendor=046d, idProduct=c055
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB Optical Mouse
usb 1-2: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2:1.0/input/input1
generic-usb 0003:046D:C055.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1f.2-2/input0
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: New USB device found, idVendor=0781, idProduct=b7b2
usb 2-2: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 2-2: Product: MobileMate Micro
usb 2-2: Manufacturer: SanDisk
usb 2-2: SerialNumber: 000000036460
scsi2 : usb-storage 2-2:1.0
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int32x1    453 MB/s
raid6: int32x2    554 MB/s
raid6: int32x4    546 MB/s
raid6: int32x8    351 MB/s
raid6: mmxx1     1406 MB/s
raid6: mmxx2     1757 MB/s
raid6: sse1x1     910 MB/s
raid6: sse1x2    1523 MB/s
raid6: sse2x1    1867 MB/s
raid6: sse2x2    1898 MB/s
raid6: using algorithm sse2x2 (1898 MB/s)
async_tx: api initialized (async)
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  2232.000 MB/sec
xor: using function: pIII_sse (2232.000 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
scsi 2:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9412 PQ: 0 ANSI: 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
md: raid10 personality registered for level 10
sd 2:0:0:0: [sdb] 1930240 512-byte logical blocks: (988 MB/942 MiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
fuse init (API version 7.16)
EXT3-fs (dm-2): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (dm-2): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
udev[4825]: starting version 164
iTCO_vendor_support: vendor-support=0
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
intel_rng: FWH not detected
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x200, speed 795kHz
input: PC Speaker as /devices/platform/pcspkr/input/input5
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:02:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
8139too 0000:02:01.0: eth0: RealTek RTL8139 at 0xf913ef00, 00:30:f1:47:79:62, IRQ 21
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
cfg80211: Calling CRDA to update world regulatory domain
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
rt2500pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2500pci-phy0::radio
Registered led device: rt2500pci-phy0::quality
intel8x0_measure_ac97_clock: measured 50840 usecs (2444 samples)
intel8x0: clocking to 48000
EXT4-fs (dm-2): re-mounted. Opts: (null)
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: user_xattr
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Adding 2097148k swap on /dev/mapper/dog-swap.  Priority:-1 extents:1 across:2097148k 
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (14102 buckets, 56408 max)
eth0: no IPv6 routers present
FS-Cache: Cache "mycache" added (type cachefiles)
CacheFiles: File cache on dm-4 registered
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
pci 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs