dmesg-good.txt

2.6.37-dmesg-good.txt (text/plain), 50.30 KB, created by Joerg Schaible on 2011-05-26 09:38:40 UTC

Initializing cgroup subsys cpu
Linux version 2.6.37-gentoo-r4 (root@josix) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #3 SMP PREEMPT Thu May 12 10:38:23 CEST 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000dfe5b800 (usable)
 BIOS-e820: 00000000dfe5b800 - 00000000e0000000 (reserved)
 BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100002000 - 0000000120000000 (usable)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.4 present.
DMI: Dell Inc. Latitude D830                   /0HN338, BIOS A12 05/20/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xdfe5b max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0C0000000 mask FE0000000 write-back
  3 base 100000000 mask F00000000 write-back
  4 base 0DFF00000 mask FFFF00000 uncachable
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 3583MB, range: 1MB, type UC
total RAM covered: 7679M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 1G 	num_reg: 4  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3583MB, range: 1MB, type UC
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
ACPI: RSDP 000fbb00 00024 (v02 DELL  )
ACPI: XSDT dfe5d200 00064 (v01 DELL    M08     27D80514 ASL  00000061)
ACPI: FACP dfe5d09c 000F4 (v04 DELL    M08     27D80514 ASL  00000061)
ACPI: DSDT dfe5d800 063EA (v02 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS dfe6c000 00040
ACPI: HPET dfe5d300 00038 (v01 DELL    M08     00000001 ASL  00000061)
ACPI: APIC dfe5d400 00068 (v01 DELL    M08     27D80514 ASL  00000047)
ACPI: ASF! dfe5d000 0007E (v32 DELL    M08     27D80514 ASL  00000061)
ACPI: MCFG dfe5d3c0 0003E (v16 DELL    M08     27D80514 ASL  00000061)
ACPI: TCPA dfe5d700 00032 (v01                 00000000 ASL  00000000)
ACPI: SLIC dfe5d49c 00176 (v01 DELL    M08     27D80514 ASL  00000061)
ACPI: SSDT dfe5b97e 004CC (v01  PmRef    CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
2694MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x000dfe5b
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x000dfe5b
On node 0 totalpages: 916970
free_area_init_node: node 0, pgdat c14abc00, node_mem_map f5bfd200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 5389 pages used for memmap
  HighMem zone: 684368 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at e0000000 (gap: e0000000:14000000)
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f5400000 s25792 r0 d23360 u2097152
pcpu-alloc: s25792 r0 d23360 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 909805
Kernel command line: root=/dev/sda3 video=uvesafb:1600x1200-32,mtrr:3,ywrap splash=verbose,theme:emergence console=tty1
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:000dfe5b)
Memory: 3632520k/3668332k available (3634k kernel code, 35360k reserved, 1167k data, 384k init, 2759028k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff8f000 - 0xfffff000   ( 448 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc14b1000 - 0xc1511000   ( 384 kB)
      .data : 0xc138c844 - 0xc14b05a8   (1167 kB)
      .text : 0xc1000000 - 0xc138c844   (3634 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptable hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:320
CPU 0 irqstacks, hard=f5008000 soft=f500a000
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty1] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2393.099 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4786.19 BogoMIPS (lpj=2393099)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20101013
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz stepping 06
CPU 1 irqstacks, hard=f5080000 soft=f5082000
Booting Node   0, Processors  #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (9572.79 BogoMIPS).
regulator: core version 0.5
regulator: dummy: 
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT dfe6c080 00043 (v01  LMPWR  DELLLOM 00001001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00043 (v01  LMPWR  DELLLOM 00001001 INTL 20050624)
ACPI: SSDT dfe5c4b4 002C8 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 002C8 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT dfe5be4a 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT dfe5c77c 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT dfe5c42f 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf3ffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff]
pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff]
pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff]
pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff]
pci_root PNP0A03:00: host bridge window [mem 0x20000000-0x17ffffff]
pci_root PNP0A03:00: address space collision: host bridge window [mem 0x20000000-0x17ffffff] conflicts with PCI mem [mem 0x00000000-0xffffffff]
pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io  0x6f20-0x6f3f]
pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io  0x6f00-0x6f1f]
pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0x6f80-0x6f9f]
pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0x6f60-0x6f7f]
pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0x6f40-0x6f5f]
pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
pci 0000:00:1f.1: reg 10: [io  0x01f0-0x01f7]
pci 0000:00:1f.1: reg 14: [io  0x03f4-0x03f7]
pci 0000:00:1f.1: reg 18: [io  0x0170-0x0177]
pci 0000:00:1f.1: reg 1c: [io  0x0374-0x0377]
pci 0000:00:1f.1: reg 20: [io  0x6fa0-0x6faf]
pci 0000:00:1f.2: [8086:2828] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io  0x6eb0-0x6eb7]
pci 0000:00:1f.2: reg 14: [io  0x6eb8-0x6ebb]
pci 0000:00:1f.2: reg 18: [io  0x6ec0-0x6ec7]
pci 0000:00:1f.2: reg 1c: [io  0x6ec8-0x6ecb]
pci 0000:00:1f.2: reg 20: [io  0x6ee0-0x6eef]
pci 0000:00:1f.2: reg 24: [io  0xeff0-0xefff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfebfbf00-0xfebfbfff]
pci 0000:00:1f.3: reg 20: [io  0x10c0-0x10df]
pci 0000:01:00.0: [10de:042b] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:01:00.0: reg 24: [io  0xdf00-0xdf7f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfeafffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.3:   bridge window [mem 0xf9e00000-0xf9ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:09:00.0: [14e4:1673] type 0 class 0x000200
pci 0000:09:00.0: reg 10: [mem 0xf9df0000-0xf9dfffff 64bit]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 09-09]
pci 0000:00:1c.5:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.5:   bridge window [mem 0xf9d00000-0xf9dfffff]
pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:01.0: [1217:7135] type 2 class 0x000607
pci 0000:03:01.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:01.4: [1217:00f7] type 0 class 0x000c00
pci 0000:03:01.4: reg 10: [mem 0xf9cff000-0xf9cfffff]
pci 0000:03:01.4: reg 14: [mem 0xf9cfe800-0xf9cfefff]
pci 0000:03:01.4: supports D1 D2
pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.4: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 03-04] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xf9c00000-0xf9cfffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode)
pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:03 [bus 03-04]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f000 - 000000000009ffff 
reserve RAM buffer: 00000000dfe5b800 - 00000000dfffffff 
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xe0000000-0xf3ffffff window]
pnp 00:00: [mem 0xf8000000-0xfebfffff window]
pnp 00:00: [mem 0xfec10000-0xfecfffff window]
pnp 00:00: [mem 0xfed1c000-0xfed1ffff window]
pnp 00:00: [mem 0xfed90000-0xfed9ffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: [mem 0xfeda7000-0xfedfffff window]
pnp 00:00: [mem 0xfee10000-0xff9fffff window]
pnp 00:00: [mem 0xffc00000-0xffdfffff window]
pnp 00:00: [mem 0x20000000-0x17ffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [irq 12]
pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:02: [io  0x0060]
pnp 00:02: [io  0x0064]
pnp 00:02: [io  0x0062]
pnp 00:02: [io  0x0066]
pnp 00:02: [irq 1]
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: [io  0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: [io  0x0072-0x0077]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: [io  0x0063]
pnp 00:04: [io  0x0065]
pnp 00:04: [io  0x0067]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io  0x002e-0x002f]
pnp 00:05: [io  0x0c80-0x0caf]
pnp 00:05: [io  0x0cc0-0x0cff]
pnp 00:05: [io  0x004e-0x004f]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:06: [dma 4]
pnp 00:06: [io  0x0000-0x000f]
pnp 00:06: [io  0x0080-0x0085]
pnp 00:06: [io  0x0087-0x008f]
pnp 00:06: [io  0x00c0-0x00df]
pnp 00:06: [io  0x0010-0x001f]
pnp 00:06: [io  0x0090-0x0091]
pnp 00:06: [io  0x0093-0x009f]
pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:07: [io  0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:09: [irq 4]
pnp 00:09: [io  0x03f8-0x03ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [dma 1]
pnp 00:0a: [irq 7]
pnp 00:0a: [io  0x0378-0x037f]
pnp 00:0a: [io  0x0778-0x077b]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0b: [mem 0xfed40000-0xfed44fff]
pnp 00:0b: [io  0x0cb0-0x0cbb]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0c: [io  0x0900-0x097f]
pnp 00:0c: [io  0x0092]
pnp 00:0c: [io  0x00b2-0x00b3]
pnp 00:0c: [io  0x0020-0x0021]
pnp 00:0c: [io  0x00a0-0x00a1]
pnp 00:0c: [irq 0 disabled]
pnp 00:0c: [io  0x04d0-0x04d1]
pnp 00:0c: [io  0x1000-0x1005]
pnp 00:0c: [io  0x1008-0x100f]
pnp 00:0c: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
pnp 00:0c: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0d: [io  0xf400-0xf4fe]
pnp 00:0d: [io  0x0086]
pnp 00:0d: [io  0x1006-0x1007]
pnp 00:0d: [io  0x100a-0x1059]
pnp 00:0d: [io  0x1060-0x107f]
pnp 00:0d: [io  0x1080-0x10bf]
pnp 00:0d: [io  0x10c0-0x10df]
pnp 00:0d: [io  0x1010-0x102f]
pnp 00:0d: [io  0x0809]
pnp 00:0d: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
pnp 00:0d: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
pnp 00:0d: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
pnp 00:0d: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0e: [mem 0x00000000-0x0009efff]
pnp 00:0e: [mem 0x0009f000-0x0009ffff]
pnp 00:0e: [mem 0x000c0000-0x000cffff]
pnp 00:0e: [mem 0x000e0000-0x000fffff]
pnp 00:0e: [mem 0x00100000-0xdfe5b7ff]
pnp 00:0e: [mem 0xdfe5b800-0xdfefffff]
pnp 00:0e: [mem 0xdff00000-0xdfffffff]
pnp 00:0e: [mem 0xdff00000-0xe06fffff]
pnp 00:0e: [mem 0xffe00000-0xffffffff]
pnp 00:0e: [mem 0xffa00000-0xffbfffff]
pnp 00:0e: [mem 0xfec00000-0xfec0ffff]
pnp 00:0e: [mem 0xfee00000-0xfee0ffff]
pnp 00:0e: [mem 0xfed20000-0xfed3ffff]
pnp 00:0e: [mem 0xfed45000-0xfed8ffff]
pnp 00:0e: [mem 0xfeda0000-0xfeda3fff]
pnp 00:0e: [mem 0xfeda4000-0xfeda4fff]
pnp 00:0e: [mem 0xfeda5000-0xfeda5fff]
pnp 00:0e: [mem 0xfeda6000-0xfeda6fff]
pnp 00:0e: [mem 0xfed18000-0xfed1bfff]
pnp 00:0e: [mem 0xf4000000-0xf7ffffff]
pnp 00:0e: disabling [mem 0xdff00000-0xe06fffff] because it overlaps 0000:00:01.0 BAR 15 [mem 0xe0000000-0xefffffff 64bit pref]
pnp 00:0e: disabling [mem 0xdff00000-0xe06fffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0xe0000000-0xefffffff 64bit pref]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: [io  0x0c80-0x0caf] has been reserved
system 00:05: [io  0x0cc0-0x0cff] could not be reserved
system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:0b: [io  0x0cb0-0x0cbb] has been reserved
system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:0c: [io  0x0900-0x097f] has been reserved
system 00:0c: [io  0x04d0-0x04d1] has been reserved
system 00:0d: [io  0xf400-0xf4fe] has been reserved
system 00:0d: [io  0x1080-0x10bf] has been reserved
system 00:0d: [io  0x10c0-0x10df] has been reserved
system 00:0d: [io  0x0809] has been reserved
system 00:0e: [mem 0x00000000-0x0009efff] could not be reserved
system 00:0e: [mem 0x0009f000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0xdfe5b7ff] could not be reserved
system 00:0e: [mem 0xdfe5b800-0xdfefffff] has been reserved
system 00:0e: [mem 0xdff00000-0xdfffffff] has been reserved
system 00:0e: [mem 0xffe00000-0xffffffff] has been reserved
system 00:0e: [mem 0xffa00000-0xffbfffff] has been reserved
system 00:0e: [mem 0xfec00000-0xfec0ffff] could not be reserved
system 00:0e: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:0e: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0e: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0e: [mem 0xfeda0000-0xfeda3fff] has been reserved
system 00:0e: [mem 0xfeda4000-0xfeda4fff] has been reserved
system 00:0e: [mem 0xfeda5000-0xfeda5fff] has been reserved
system 00:0e: [mem 0xfeda6000-0xfeda6fff] has been reserved
system 00:0e: [mem 0xfed18000-0xfed1bfff] has been reserved
system 00:0e: [mem 0xf4000000-0xf7ffffff] has been reserved
pci 0000:00:1e.0: BAR 15: can't assign mem pref (size 0x4000000)
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf03fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:1c.5: BAR 13: assigned [io  0x3000-0x3fff]
pci 0000:00:1e.0: BAR 13: assigned [io  0x4000-0x4fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfeafffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf03fffff]
pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.3:   bridge window [mem 0xf9e00000-0xf9ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 09-09]
pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.5:   bridge window [mem 0xf9d00000-0xf9dfffff]
pci 0000:00:1c.5:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:03:01.0: BAR 15: can't assign mem pref (size 0x4000000)
pci 0000:03:01.0: BAR 16: can't assign mem (size 0x4000000)
pci 0000:03:01.0: BAR 0: assigned [mem 0xf9c00000-0xf9c00fff]
pci 0000:03:01.0: BAR 0: set to [mem 0xf9c00000-0xf9c00fff] (PCI address [0xf9c00000-0xf9c00fff])
pci 0000:03:01.0: BAR 13: assigned [io  0x4000-0x40ff]
pci 0000:03:01.0: BAR 14: assigned [io  0x4400-0x44ff]
pci 0000:03:01.0: CardBus bridge to [bus 04-07]
pci 0000:03:01.0:   bridge window [io  0x4000-0x40ff]
pci 0000:03:01.0:   bridge window [io  0x4400-0x44ff]
pci 0000:00:1e.0: PCI bridge to [bus 03-04]
pci 0000:00:1e.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1e.0:   bridge window [mem 0xf9c00000-0xf9cfffff]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:03:01.0: enabling device (0000 -> 0003)
pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf3ffffff]
pci_bus 0000:00: resource 9 [mem 0xf8000000-0xfebfffff]
pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff]
pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff]
pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff]
pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfedfffff]
pci_bus 0000:00: resource 15 [mem 0xfee10000-0xff9fffff]
pci_bus 0000:00: resource 16 [mem 0xffc00000-0xffdfffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:0b: resource 1 [mem 0xf0200000-0xf03fffff]
pci_bus 0000:0b: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:0c: resource 1 [mem 0xf9e00000-0xf9ffffff]
pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:09: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:09: resource 1 [mem 0xf9d00000-0xf9dfffff]
pci_bus 0000:09: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xf9c00000-0xf9cfffff]
pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf3ffffff]
pci_bus 0000:03: resource 9 [mem 0xf8000000-0xfebfffff]
pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff]
pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff]
pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff]
pci_bus 0000:03: resource 13 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:03: resource 14 [mem 0xfeda7000-0xfedfffff]
pci_bus 0000:03: resource 15 [mem 0xfee10000-0xff9fffff]
pci_bus 0000:03: resource 16 [mem 0xffc00000-0xffdfffff]
pci_bus 0000:04: resource 0 [io  0x4000-0x40ff]
pci_bus 0000:04: resource 1 [io  0x4400-0x44ff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1306398897.407:1): initialized
highmem bounce pool size: 64 pages
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 1706
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
uvesafb: NVIDIA Corporation, G86 Board - dawson0 , Chip Rev   , OEM: NVIDIA, VBE v3.0
uvesafb: protected mode interface info at c000:b770
uvesafb: pmi: set display start = c00cb7d3, set palette = c00cb82e
uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
uvesafb: VBIOS/hardware doesn't support DDC transfers
uvesafb: no monitor limits have been set, default refresh rate will be used
uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=2293
mtrr: type mismatch for fb000000,800000 old: write-back new: write-combining
mtrr: type mismatch for fb000000,400000 old: write-back new: write-combining
mtrr: type mismatch for fb000000,200000 old: write-back new: write-combining
mtrr: type mismatch for fb000000,100000 old: write-back new: write-combining
mtrr: type mismatch for fb000000,80000 old: write-back new: write-combining
mtrr: type mismatch for fb000000,40000 old: write-back new: write-combining
mtrr: type mismatch for fb000000,20000 old: write-back new: write-combining
mtrr: type mismatch for fb000000,10000 old: write-back new: write-combining
mtrr: type mismatch for fb000000,8000 old: write-back new: write-combining
mtrr: type mismatch for fb000000,4000 old: write-back new: write-combining
mtrr: type mismatch for fb000000,2000 old: write-back new: write-combining
mtrr: type mismatch for fb000000,1000 old: write-back new: write-combining
Console: switching to colour frame buffer device 200x75
uvesafb: framebuffer at 0xfb000000, mapped to 0xf8080000, using 14336k, total 14336k
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
GHES: HEST is not enabled!
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata2: port disabled. ignoring.
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17
ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17
yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01fe]
yenta_cardbus 0000:03:01.0: CardBus bridge to [bus 04-07]
yenta_cardbus 0000:03:01.0:   bridge window [io  0x4000-0x40ff]
yenta_cardbus 0000:03:01.0:   bridge window [io  0x4400-0x44ff]
yenta_cardbus 0000:03:01.0:   bridge window [mem 0xf0800000-0xf0bfffff]
yenta_cardbus 0000:03:01.0:   bridge window [mem 0xf0c00000-0xf0ffffff]
yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D400, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632H D400 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.01: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-8: Hitachi HTS722012K9A300, DCCOCA1H, max UDMA/133
ata3.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS72201 DCCO PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
ata4.01: failed to resume link (SControl 0)
ata4.00: SATA link down (SStatus 0 SControl 300)
ata4.01: SATA link down (SStatus 0 SControl 0)
yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
yenta_cardbus 0000:03:01.0: Socket status: 30000006
pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [io  0x4000-0x4fff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: excluding 0x4000-0x40ff 0x4400-0x44ff
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0xf9c00000-0xf9cfffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xf9c00000-0xf9cfffff: excluding 0xf9c00000-0xf9c0ffff 0xf9cf0000-0xf9cfffff
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
ioatdma: Intel(R) QuickData Technology Driver 4.00
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
VFS: Mounted root (xfs filesystem) readonly on device 8:3.
Freeing unused kernel memory: 384k freed
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input2
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input3
udev: starting version 151
udevd (776): /proc/776/oom_adj is deprecated, please use /proc/776/oom_score_adj instead.
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding 0xc80-0xcbf
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ACPI: AC Adapter [AC] (on-line)
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
ACPI: Battery Slot [BAT0] (battery present)
Monitor-Mwait will be used to enter C-2 state
ACPI: Battery Slot [BAT1] (battery absent)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2f/LNXVIDEO:00/input/input4
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.37-gentoo-r4 uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.37-gentoo-r4 uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.37-gentoo-r4 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.37-gentoo-r4 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.37-gentoo-r4 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
tg3.c:v3.115 (October 14, 2010)
tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:09:00.0: setting latency timer to 64
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1a.7: debug port 1
tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:21:70:6d:8e:86
tg3 0000:09:00.0: eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1])
tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.37-gentoo-r4 ehci_hcd
usb usb6: SerialNumber: 0000:00:1a.7
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.37-gentoo-r4 ehci_hcd
usb usb7: SerialNumber: 0000:00:1d.7
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
ACPI: Sleep Button [SBTN]
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (57 C)
usb 6-3: new high speed USB device using ehci_hcd and address 2
usb 6-3: New USB device found, idVendor=413c, idProduct=0058
usb 6-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-3:1.0: USB hub found
hub 6-3:1.0: 4 ports detected
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: New USB device found, idVendor=0b97, idProduct=7761
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
usb 6-3.1: new high speed USB device using ehci_hcd and address 3
usb 6-3.1: New USB device found, idVendor=0424, idProduct=2502
usb 6-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-3.1:1.0: USB hub found
hub 6-3.1:1.0: 2 ports detected
usb 6-3.2: new low speed USB device using ehci_hcd and address 4
usb 6-3.2: New USB device found, idVendor=045e, idProduct=00db
usb 6-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-3.2: Product: Natural® Ergonomic Keyboard 4000
usb 6-3.2: Manufacturer: Microsoft
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 6-3.4: new high speed USB device using ehci_hcd and address 5
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.7/usb6/6-3/6-3.2/6-3.2:1.0/input/input8
microsoft 0003:045E:00DB.0001: input: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1a.7-3.2/input0
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.7/usb6/6-3/6-3.2/6-3.2:1.1/input/input9
microsoft 0003:045E:00DB.0002: input: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1a.7-3.2/input1
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module  270.41.19  Mon May 16 23:31:36 PDT 2011
usb 6-3.4: New USB device found, idVendor=04b4, idProduct=6830
usb 6-3.4: New USB device strings: Mfr=56, Product=78, SerialNumber=100
usb 6-3.4: Product: USB2.0 Storage Device
usb 6-3.4: Manufacturer: Cypress Semiconductor
usb 6-3.4: SerialNumber: DEF1081AFD11
usb 5-1.2: new full speed USB device using uhci_hcd and address 3
Initializing USB Mass Storage driver...
scsi4 : usb-storage 6-3.4:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 5-1.2: New USB device found, idVendor=0b97, idProduct=7772
usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.2: Product: O2Micro CCID SC Reader
usb 5-1.2: Manufacturer: O2
usb 6-3.1.1: new high speed USB device using ehci_hcd and address 6
usb 6-3.1.1: New USB device found, idVendor=0424, idProduct=2602
usb 6-3.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-3.1.1:1.0: USB hub found
hub 6-3.1.1:1.0: 4 ports detected
usb 6-3.1.1.1: new high speed USB device using ehci_hcd and address 7
usb 6-3.1.1.1: New USB device found, idVendor=0424, idProduct=2228
usb 6-3.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-3.1.1.1: Product: Flash Card Reader
usb 6-3.1.1.1: Manufacturer: Generic
usb 6-3.1.1.1: SerialNumber: 26020128B005
scsi5 : usb-storage 6-3.1.1.1:1.0
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x1bc offMax=0x1b54
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.2.12 (interface 0x00140001).
usb 6-3.1.1.2: new low speed USB device using ehci_hcd and address 8
usb 6-3.1.1.2: New USB device found, idVendor=045e, idProduct=0039
usb 6-3.1.1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 6-3.1.1.2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
usb 6-3.1.1.2: Manufacturer: Microsoft
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.7/usb6/6-3/6-3.1/6-3.1.1/6-3.1.1.2/6-3.1.1.2:1.0/input/input10
generic-usb 0003:045E:0039.0003: input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.7-3.1.1.2/input0
scsi 4:0:0:0: Direct-Access     SAMSUNG  SP1614N               PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 33 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI disk
scsi 5:0:0:0: Direct-Access     Generic  Flash HS-CF      4.44 PQ: 0 ANSI: 0
sd 5:0:0:0: Attached scsi generic sg3 type 0
scsi 5:0:0:1: Direct-Access     Generic  Flash HS-COMBO   4.44 PQ: 0 ANSI: 0
sd 5:0:0:1: Attached scsi generic sg4 type 0
sd 5:0:0:0: [sdc] Attached SCSI removable disk
sd 5:0:0:1: [sdd] Attached SCSI removable disk
fbcondecor: console 0 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 0
fbcondecor: console 1 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 1
fbcondecor: console 2 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 2
fbcondecor: console 3 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 3
fbcondecor: console 4 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 4
fbcondecor: console 5 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 5
tg3 0000:09:00.0: irq 41 for MSI/MSI-X
tg3 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:09:00.0: eth0: Flow control is off for TX and off for RX
Adding 12691344k swap on /dev/sda2.  Priority:1 extents:1 across:12691344k 
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
CIFS VFS: Send error in SETFSUnixInfo = -5
CIFS VFS: Negotiating Unix capabilities with the server failed.  Consider mounting with the Unix Extensions
disabled, if problems are found, by specifying the nounix mount option.
CIFS VFS: Send error in SETFSUnixInfo = -5
CIFS VFS: Negotiating Unix capabilities with the server failed.  Consider mounting with the Unix Extensions
disabled, if problems are found, by specifying the nounix mount option.
CIFS VFS: Send error in SETFSUnixInfo = -5
CIFS VFS: Negotiating Unix capabilities with the server failed.  Consider mounting with the Unix Extensions
disabled, if problems are found, by specifying the nounix mount option.