conf.d/dahdi-autoconf

dahdi-autoconf (text/plain), 1.04 KB, created by Jaco Kroon on 2011-05-03 07:25:37 UTC

# Global settings
# Set this to your country code.
DAHDI_ZONE=za
DAHDI_ECHOCAN=oslec # mg2,jpah,kb1,sec,sec2 (there may be more, we recommend oslec)

# Settings for analog
#Analog signal types, one of:
# ks - KewlStart (recommended, default)
# ls - LoopStart
# gs - GroundStart

# Signalling to be used on FXO ports
DAHDI_FXO_SIGNALLING=ks

# Signalling to be used on FXS ports
DAHDI_FXS_SIGNALLING=ks

# Whether or not to echocan:
DAHDI_FXO_ECHOCAN=yes
DAHDI_FXS_ECHOCAN=yes

# These settings will be used for BRI cards.
# Known options: B8ZS,AMI,HDB3
DAHDI_BRI_CODING=AMI

# Known options: ESF,D4,CCS,CRC4
DAHDI_BRI_FRAMING=CCS

# Our experience is that it's not required (still defaults to yes)
DAHDI_BRI_NT_ECHOCAN=no
DAHDI_BRI_TE_ECHOCAN=no

# These settings are for PRI cards.  Note that only E1 currently supported.
DAHDI_E1_CPE_ECHOCAN=no
DAHDI_E1_NET_ECHOCAN=no

# PRI will default to CPE mode (remote end provides signalling).
# If you really want to provide signalling set the appropriate spans
# here (eg, set span 1 to NET mode).
#PRI_SPAN_1_NET=yes