dmesg output

dmesg_output.txt (text/plain), 30.26 KB, created by Plero H on 2011-04-15 18:54:55 UTC

0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: [197b:2363] type 0 class 0x000106
pci 0000:03:00.0: reg 24: [mem 0xfa000000-0xfa001fff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
pci 0000:03:00.1: reg 10: [io  0xc000-0xc007]
pci 0000:03:00.1: reg 14: [io  0xc100-0xc103]
pci 0000:03:00.1: reg 18: [io  0xc200-0xc207]
pci 0000:03:00.1: reg 1c: [io  0xc300-0xc303]
pci 0000:03:00.1: reg 20: [io  0xc400-0xc40f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfa0fffff]
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:01.0: [10ec:8169] type 0 class 0x000200
pci 0000:05:01.0: reg 10: [io  0xd000-0xd0ff]
pci 0000:05:01.0: reg 14: [mem 0xf9005000-0xf90050ff]
pci 0000:05:01.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:05:01.0: supports D1 D2
pci 0000:05:01.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:05:01.0: PME# disabled
pci 0000:05:02.0: [1102:0004] type 0 class 0x000401
pci 0000:05:02.0: reg 10: [io  0xd100-0xd13f]
pci 0000:05:02.0: supports D1 D2
pci 0000:05:02.1: [1102:7003] type 0 class 0x000980
pci 0000:05:02.1: reg 10: [io  0xd200-0xd207]
pci 0000:05:02.1: supports D1 D2
pci 0000:05:02.2: [1102:4001] type 0 class 0x000c00
pci 0000:05:02.2: reg 10: [mem 0xf9004000-0xf90047ff]
pci 0000:05:02.2: reg 14: [mem 0xf9000000-0xf9003fff]
pci 0000:05:02.2: supports D1 D2
pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
pci 0000:05:02.2: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009dc00 - 000000000009ffff 
reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff 
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3f]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xdff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0010-0x001f]
pnp 00:01: [io  0x0022-0x003f]
pnp 00:01: [io  0x0044-0x005f]
pnp 00:01: [io  0x0062-0x0063]
pnp 00:01: [io  0x0065-0x006f]
pnp 00:01: [io  0x0074-0x007f]
pnp 00:01: [io  0x0091-0x0093]
pnp 00:01: [io  0x00a2-0x00bf]
pnp 00:01: [io  0x00e0-0x00ef]
pnp 00:01: [io  0x04d0-0x04d1]
pnp 00:01: [io  0x0290-0x029f]
pnp 00:01: [io  0x0800-0x087f]
pnp 00:01: [io  0x0290-0x0294]
pnp 00:01: [io  0x0880-0x088f]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0080-0x0090]
pnp 00:02: [io  0x0094-0x009f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 0 disabled]
pnp 00:03: [irq 8]
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x0070-0x0073]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io  0x03f0-0x03f5]
pnp 00:07: [io  0x03f7]
pnp 00:07: [irq 6]
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: [io  0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io  0x0400-0x04bf]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xf0000000-0xf3ffffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x000d6000-0x000d7fff]
pnp 00:0b: [mem 0x000f0000-0x000f7fff]
pnp 00:0b: [mem 0x000f8000-0x000fbfff]
pnp 00:0b: [mem 0x000fc000-0x000fffff]
pnp 00:0b: [mem 0xdfee0000-0xdfefffff]
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x00100000-0xdfedffff]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfed10000-0xfed1dfff]
pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
pnp 00:0b: [mem 0xfff00000-0xffffffff]
pnp 00:0b: [mem 0x000e0000-0x000effff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0c: [mem 0xffb80000-0xffbfffff]
pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0290-0x029f] has been reserved
system 00:01: [io  0x0800-0x087f] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:01: [io  0x0880-0x088f] has been reserved
system 00:09: [io  0x0400-0x04bf] has been reserved
system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0b: [mem 0x000d6000-0x000d7fff] has been reserved
system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: [mem 0xdfee0000-0xdfefffff] could not be reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0xdfedffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
pci 0000:00:1c.0: BAR 8: assigned [mem 0xfa200000-0xfa3fffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xfa400000-0xfa5fffff 64bit pref]
pci 0000:00:1c.3: BAR 9: assigned [mem 0xfa600000-0xfa7fffff 64bit pref]
pci 0000:00:1c.4: BAR 8: assigned [mem 0xfa800000-0xfa9fffff]
pci 0000:00:1c.4: BAR 9: assigned [mem 0xfaa00000-0xfabfffff 64bit pref]
pci 0000:00:1e.0: BAR 9: assigned [mem 0xdff00000-0xdfffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf7000000-0xf701ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.0:   bridge window [mem 0xfa200000-0xfa3fffff]
pci 0000:00:1c.0:   bridge window [mem 0xfa400000-0xfa5fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfa0fffff]
pci 0000:00:1c.3:   bridge window [mem 0xfa600000-0xfa7fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.4:   bridge window [mem 0xfa800000-0xfa9fffff]
pci 0000:00:1c.4:   bridge window [mem 0xfaa00000-0xfabfffff 64bit pref]
pci 0000:05:01.0: BAR 6: assigned [mem 0xdff00000-0xdff1ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1e.0:   bridge window [mem 0xdff00000-0xdfffffff pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xfa200000-0xfa3fffff]
pci_bus 0000:02: resource 2 [mem 0xfa400000-0xfa5fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfa0fffff]
pci_bus 0000:03: resource 2 [mem 0xfa600000-0xfa7fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:04: resource 1 [mem 0xfa800000-0xfa9fffff]
pci_bus 0000:04: resource 2 [mem 0xfaa00000-0xfabfffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:05: resource 2 [mem 0xdff00000-0xdfffffff pref]
pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2980k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800db600000 - ffff8800df600000
software IO TLB at phys 0xdb600000 - 0xdf600000
audit: initializing netlink socket (disabled)
type=2000 audit(1302902677.221:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
GFS2 (built Apr 15 2011 19:39:39) installed
msgmni has been set to 7912
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
Linux agpgart interface v0.103
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
intel_idle: MWAIT substates: 0x220
intel_idle: does not run on family 6 model 15
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfa102000 port 0xfa102100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xfa102000 port 0xfa102180 irq 40
ata3: SATA max UDMA/133 abar m2048@0xfa102000 port 0xfa102200 irq 40
ata4: SATA max UDMA/133 abar m2048@0xfa102000 port 0xfa102280 irq 40
ata5: SATA max UDMA/133 abar m2048@0xfa102000 port 0xfa102300 irq 40
ata6: SATA max UDMA/133 abar m2048@0xfa102000 port 0xfa102380 irq 40
ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
ahci 0000:03:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000100 irq 19
ata8: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000180 irq 19
pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
ata10: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
firewire_ohci 0000:05:02.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
firewire_ohci: Added fw-ohci device 0000:05:02.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
lirc_dev: IR Remote Control driver registered, major 252 
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR LIRC bridge handler initialized
Linux video capture interface: v2.00
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iTCO_vendor_support: vendor-support=0
cpuidle: using governor ladder
cpuidle: using governor menu
ioatdma: Intel(R) QuickData Technology Driver 4.00
TCP cubic registered
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
ata9.00: ATAPI: SONY    DVD RW AW-G170A, 1.71, max UDMA/66
ata9.00: configured for UDMA/66
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
firewire_core: created device fw0: GUID 00023c0101045b36, S400
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB01, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203P  SB01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: HPA detected: current 156299375, native 156301488
ata3.00: ATA-6: ST380817AS, 3.42, max UDMA/133
ata3.00: 156299375 sectors, multi 0: LBA48 NCQ (not used)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      ST380817AS       3.42 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3
sd 2:0:0:0: [sdb] Attached SCSI disk
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-6: ST380817AS, 3.42, max UDMA/133
ata4.00: 156301488 sectors, multi 0: LBA48 NCQ (not used)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      ST380817AS       3.42 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc2 sdc3
sd 3:0:0:0: [sdc] Attached SCSI disk
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1 sdd2 sdd3
sd 4:0:0:0: [sdd] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
scsi 8:0:0:0: CD-ROM            SONY     DVD RW AW-G170A  1.71 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 8:0:0:0: Attached scsi CD-ROM sr1
Freeing unused kernel memory: 460k freed
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sr 8:0:0:0: Attached scsi generic sg5 type 5
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
imm: Version 2.05 (for Linux 2.4.0)
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
Adaptec aacraid driver 1.1-5[26400]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010
QLogic Fibre Channel HBA Driver: 8.03.05-k0
Emulex LightPulse Fibre Channel SCSI driver 8.3.18
Copyright(c) 2004-2009 Emulex.  All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfa101000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e500
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
fuse init (API version 7.15)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
Loading iSCSI transport class v2.0-870.
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 8-1: new full speed USB device using uhci_hcd and address 2
hub 8-1:1.0: USB hub found
hub 8-1:1.0: 4 ports detected
usb 8-2: new full speed USB device using uhci_hcd and address 3
input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input0
generic-usb 0003:046D:C041.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-2/input0
generic-usb 0003:046D:C041.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-2/input1
usb 8-1.1: new low speed USB device using uhci_hcd and address 4
input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.1/8-1.1:1.0/input/input1
generic-usb 0003:046D:C221.0005: input,hidraw2: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:1d.2-1.1/input0
input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.1/8-1.1:1.1/input/input2
generic-usb 0003:046D:C221.0006: input,hiddev0,hidraw3: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:1d.2-1.1/input1
usb 8-1.4: new full speed USB device using uhci_hcd and address 5
input: G15 Keyboard G15 Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.4/8-1.4:1.0/input/input3
generic-usb 0003:046D:C222.0007: input,hiddev0,hidraw4: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:1d.2-1.4/input0
EXT3-fs (sdd2): error: couldn't mount because of unsupported optional features (40)
EXT2-fs (sdd2): error: couldn't mount because of unsupported optional features (40)
EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
udev: starting version 151
udevd (5070): /proc/5070/oom_adj is deprecated, please use /proc/5070/oom_score_adj instead.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
ACPI: acpi_idle registered with cpuidle
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:05:01.0: (unregistered net_device): no PCI Express capability
r8169 0000:05:01.0: eth0: RTL8169sb/8110sb at 0xffffc9000496c000, 00:16:0a:1c:69:1f, XID 10000000 IRQ 19
input: PC Speaker as /devices/platform/pcspkr/input/input6
input: MLK TURBO-X as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input7
sunplus 0003:04FC:05D8.0001: input,hidraw5: USB HID v1.00 Keyboard [MLK TURBO-X] on usb-0000:00:1a.0-2/input0
sunplus 0003:04FC:05D8.0002: fixing up Sunplus Wireless Desktop report descriptor
input: MLK TURBO-X as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input8
sunplus 0003:04FC:05D8.0002: input,hiddev0,hidraw6: USB HID v1.00 Mouse [MLK TURBO-X] on usb-0000:00:1a.0-2/input1
gameport gameport0: EMU10K1 is pci0000:05:02.1/gameport0, io 0xd200, speed 1010kHz
udev: renamed network interface eth0 to eth1
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
EMU10K1_Audigy 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Installing spdif_bug patch: SB Audigy 2 [SB0240]
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  260.19.36  Tue Jan 18 16:56:11 PST 2011
EXT4-fs (sdd2): re-mounted. Opts: user_xattr,commit=100,barrier=0
Bridge firewalling registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
uvesafb: NVIDIA Corporation, G92 Board - 03950050, Chip Rev   , OEM: NVIDIA, VBE v3.0
uvesafb: VBIOS/hardware doesn't support DDC transfers
uvesafb: no monitor limits have been set, default refresh rate will be used
uvesafb: scrolling: redraw
mtrr: type mismatch for f5000000,800000 old: write-back new: write-combining
mtrr: type mismatch for f5000000,400000 old: write-back new: write-combining
mtrr: type mismatch for f5000000,200000 old: write-back new: write-combining
mtrr: type mismatch for f5000000,100000 old: write-back new: write-combining
mtrr: type mismatch for f5000000,80000 old: write-back new: write-combining
mtrr: type mismatch for f5000000,40000 old: write-back new: write-combining
mtrr: type mismatch for f5000000,20000 old: write-back new: write-combining
mtrr: type mismatch for f5000000,10000 old: write-back new: write-combining
mtrr: type mismatch for f5000000,8000 old: write-back new: write-combining
mtrr: type mismatch for f5000000,4000 old: write-back new: write-combining
mtrr: type mismatch for f5000000,2000 old: write-back new: write-combining
mtrr: type mismatch for f5000000,1000 old: write-back new: write-combining
Console: switching to colour frame buffer device 160x64
uvesafb: framebuffer at 0xf5000000, mapped to 0xffffc90004980000, using 10240k, total 14336k
fb0: VESA VGA frame buffer device
EXT4-fs (sda1): Ignoring deprecated nobh option
EXT4-fs (sda1): barriers disabled
EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: user_xattr,commit=100,barrier=0,data=writeback,nobh
Adding 987960k swap on /dev/sdb1.  Priority:-1 extents:1 across:987960k 
it87: Found IT8718F chip at 0x290, revision 4
it87: Beeping is supported
coretemp coretemp.0: TjMax is assumed as 100 C!
coretemp coretemp.1: TjMax is assumed as 100 C!
microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb6
microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb6
microcode: Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
microcode: CPU0 updated to revision 0xba, date = 2010-10-03
microcode: CPU1 updated to revision 0xba, date = 2010-10-03
microcode: Microcode Update Driver: v2.00 removed.
r8169 0000:05:01.0: eth1: link up
input: G15 Extra Keys as /devices/virtual/input/input9
process `skype' is using obsolete setsockopt SO_BSDCOMPAT