[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-hardened (root@xserver) (gcc version 4.5.2 (Gentoo Hardened 4.5.2 p1.1, pie-0.4.5) ) #1 SMP Fri Apr 15 01:19:26 CEST 2011 [ 0.000000] Command line: dolvm2 root=/dev/ram0 real_root=/dev/md3 init=/linuxrc [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved) [ 0.000000] BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: MSI MS-7522/MSI X58 Pro-E (MS-7522), BIOS V8.12 05/13/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-E3FFF write-protect [ 0.000000] E4000-E7FFF write-through [ 0.000000] E8000-EBFFF write-protect [ 0.000000] EC000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf780000 page 4k [ 0.000000] kernel direct mapping tables up to bf780000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000 [ 0.000000] 0100000000 - 0240000000 page 2M [ 0.000000] kernel direct mapping tables up to 240000000 @ bf776000-bf780000 [ 0.000000] RAMDISK: 37be0000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000fa4c0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000bf780000 0003C (v01 7522MS A7522800 20100513 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 7522MS A7522800 20100513 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf780480 06D1A (v01 A7522 A7522800 00000800 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bf78e000 00040 [ 0.000000] ACPI: APIC 00000000bf780390 000AC (v01 7522MS A7522800 20100513 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf780440 0003C (v01 7522MS OEMMCFG 20100513 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf78e040 0007A (v01 7522MS A7522800 20100513 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bf78a480 00038 (v01 7522MS OEMHPET 20100513 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf790560 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000240000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [000000023fff5000 - 000000023fffffff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237e00000-ffff88023edfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bf780 [ 0.000000] 0: 0x00100000 -> 0x00240000 [ 0.000000] On node 0 totalpages: 2094862 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1292800 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 12 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000 [ 0.000000] PM: Registered nosave memory: 00000000bf78e000 - 00000000bf7d0000 [ 0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000 [ 0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ec000 [ 0.000000] PM: Registered nosave memory: 00000000bf7ec000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:12 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 23 pages/cpu @ffff8800bf400000 s63744 r8192 d22272 u131072 [ 0.000000] pcpu-alloc: s63744 r8192 d22272 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062600 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: dolvm2 root=/dev/ram0 real_root=/dev/md3 init=/linuxrc [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 8178972k/9437184k available (7115k kernel code, 1057736k absent, 200476k reserved, 4632k data, 532k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:776 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 83886080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.010000] Detected 2807.027 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5614.05 BogoMIPS (lpj=28070270) [ 0.000433] pid_max: default: 32768 minimum: 501 [ 0.000679] Security Framework initialized [ 0.000892] SELinux: Initializing. [ 0.001111] SELinux: Starting in permissive mode [ 0.001800] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004085] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.005091] Mount-cache hash table entries: 256 [ 0.005440] Initializing cgroup subsys ns [ 0.005655] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.006046] Initializing cgroup subsys cpuacct [ 0.006263] Initializing cgroup subsys memory [ 0.006484] Initializing cgroup subsys devices [ 0.006697] Initializing cgroup subsys freezer [ 0.006910] Initializing cgroup subsys net_cls [ 0.007124] Initializing cgroup subsys blkio [ 0.007361] CPU: Physical Processor ID: 0 [ 0.007573] CPU: Processor Core ID: 0 [ 0.007788] mce: CPU supports 9 MCE banks [ 0.008012] CPU0: Thermal monitoring enabled (TM1) [ 0.008232] using mwait in idle threads. [ 0.008720] ACPI: Core revision 20110112 [ 0.035591] Setting APIC routing to physical flat [ 0.036123] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.136126] CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05 [ 0.247840] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver. [ 0.248169] ... version: 3 [ 0.248381] ... bit width: 48 [ 0.248594] ... generic registers: 4 [ 0.248806] ... value mask: 0000ffffffffffff [ 0.249021] ... max period: 000000007fffffff [ 0.249236] ... fixed-purpose events: 3 [ 0.249448] ... event mask: 000000070000000f [ 0.249833] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 [ 1.505095] Brought up 8 CPUs [ 1.505513] Total of 8 processors activated (44911.02 BogoMIPS). [ 1.508818] kworker/u:0 used greatest stack depth: 4952 bytes left [ 1.515416] xor: automatically using best checksumming function: generic_sse [ 1.564896] generic_sse: 10508.000 MB/sec [ 1.565109] xor: using function: generic_sse (10508.000 MB/sec) [ 1.565452] print_constraints: dummy: [ 1.565686] Time: 14:17:29 Date: 04/15/11 [ 1.565930] NET: Registered protocol family 16 [ 1.566452] ACPI: bus type pci registered [ 1.566748] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.567141] PCI: not using MMCONFIG [ 1.567351] PCI: Using configuration type 1 for base access [ 1.573620] bio: create slab at 0 [ 1.734517] raid6: int64x1 2798 MB/s [ 1.904149] raid6: int64x2 2977 MB/s [ 2.073780] raid6: int64x4 2396 MB/s [ 2.243397] raid6: int64x8 1799 MB/s [ 2.413002] raid6: sse2x1 6487 MB/s [ 2.582624] raid6: sse2x2 8102 MB/s [ 2.752243] raid6: sse2x4 9298 MB/s [ 2.752454] raid6: using algorithm sse2x4 (9298 MB/s) [ 2.753503] ACPI: EC: Detected MSI hardware, enabling workarounds. [ 2.753505] ACPI: EC: Look up EC in DSDT [ 2.754313] ACPI: Executed 1 blocks of module-level executable AML code [ 2.757808] ACPI: SSDT 00000000bf78e0c0 01E1C (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 2.758563] ACPI: Dynamic OEM Table Load: [ 2.758846] ACPI: SSDT (nil) 01E1C (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 2.759396] ACPI: SSDT 00000000bf78fee0 00678 (v01 PmRef P001Cst 00003001 INTL 20051117) [ 2.760074] ACPI: Dynamic OEM Table Load: [ 2.760356] ACPI: SSDT (nil) 00678 (v01 PmRef P001Cst 00003001 INTL 20051117) [ 2.782381] ACPI: Interpreter enabled [ 2.786825] ACPI: (supports S0 S1 S4 S5) [ 2.787189] ACPI: Using IOAPIC for interrupt routing [ 2.788480] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 2.789384] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 2.814144] ACPI: No dock devices found. [ 2.814357] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.814816] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.815199] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 2.815417] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 2.815635] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 2.816022] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 2.816409] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] [ 2.816797] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff] [ 2.817195] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600 [ 2.817236] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 2.817239] pci 0000:00:00.0: PME# disabled [ 2.817258] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 2.817299] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.817302] pci 0000:00:01.0: PME# disabled [ 2.817322] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 2.817362] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 2.817365] pci 0000:00:03.0: PME# disabled [ 2.817388] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 2.817428] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 2.817431] pci 0000:00:07.0: PME# disabled [ 2.817454] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 2.817509] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 2.817563] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 2.817615] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 2.817669] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 2.817708] pci 0000:00:1a.0: reg 20: [io 0xbc00-0xbc1f] [ 2.817747] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 [ 2.817786] pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f] [ 2.817826] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 2.817864] pci 0000:00:1a.2: reg 20: [io 0xb800-0xb81f] [ 2.817913] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 2.817932] pci 0000:00:1a.7: reg 10: [mem 0xf7ffe000-0xf7ffe3ff] [ 2.817999] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 2.818003] pci 0000:00:1a.7: PME# disabled [ 2.818021] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 2.818071] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.818075] pci 0000:00:1c.0: PME# disabled [ 2.818096] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604 [ 2.818147] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 2.818150] pci 0000:00:1c.4: PME# disabled [ 2.818172] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 2.818210] pci 0000:00:1d.0: reg 20: [io 0xb480-0xb49f] [ 2.818250] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 2.818289] pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f] [ 2.818328] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 2.818367] pci 0000:00:1d.2: reg 20: [io 0xb080-0xb09f] [ 2.818415] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 2.818434] pci 0000:00:1d.7: reg 10: [mem 0xf7ffc000-0xf7ffc3ff] [ 2.818501] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 2.818504] pci 0000:00:1d.7: PME# disabled [ 2.818522] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 2.818573] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 2.818648] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 2.819037] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017) [ 2.819426] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff) [ 2.819847] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 [ 2.819864] pci 0000:00:1f.2: reg 10: [io 0xb000-0xb007] [ 2.819871] pci 0000:00:1f.2: reg 14: [io 0xac00-0xac03] [ 2.819878] pci 0000:00:1f.2: reg 18: [io 0xa880-0xa887] [ 2.819885] pci 0000:00:1f.2: reg 1c: [io 0xa800-0xa803] [ 2.819892] pci 0000:00:1f.2: reg 20: [io 0xa480-0xa49f] [ 2.819899] pci 0000:00:1f.2: reg 24: [mem 0xf7ffa000-0xf7ffa7ff] [ 2.819930] pci 0000:00:1f.2: PME# supported from D3hot [ 2.819933] pci 0000:00:1f.2: PME# disabled [ 2.819947] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 2.819961] pci 0000:00:1f.3: reg 10: [mem 0xf7ff9c00-0xf7ff9cff 64bit] [ 2.819980] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 2.820033] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 2.820249] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 2.820253] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 2.820257] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 2.820299] pci 0000:02:00.0: [10de:06e4] type 0 class 0x000300 [ 2.820308] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 2.820318] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.820328] pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit] [ 2.820335] pci 0000:02:00.0: reg 24: [io 0xcc00-0xcc7f] [ 2.820342] pci 0000:02:00.0: reg 30: [mem 0xfbce0000-0xfbcfffff pref] [ 2.832108] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 2.832331] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 2.832334] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff] [ 2.832339] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.832373] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 2.832590] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled) [ 2.832593] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 2.832598] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 2.832634] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 2.832850] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 2.832854] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 2.832859] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 2.832911] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200 [ 2.832926] pci 0000:06:00.0: reg 10: [io 0xe800-0xe8ff] [ 2.832953] pci 0000:06:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit] [ 2.832970] pci 0000:06:00.0: reg 20: [mem 0xf6ff0000-0xf6ffffff 64bit pref] [ 2.832981] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 2.833018] pci 0000:06:00.0: supports D1 D2 [ 2.833020] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.833024] pci 0000:06:00.0: PME# disabled [ 2.852074] pci 0000:00:1c.4: PCI bridge to [bus 06-06] [ 2.852297] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 2.852301] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff] [ 2.852306] pci 0000:00:1c.4: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 2.852361] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode) [ 2.852582] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 2.852585] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 2.852590] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 2.852592] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.852594] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.852597] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.852599] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 2.852601] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 2.852603] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) [ 2.852625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 2.852851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 2.852918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 2.852949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 2.852986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 2.853012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 2.853037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 2.853061] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 2.859265] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 2.859900] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 2.860253] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15) [ 2.860887] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 2.861520] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 2.862400] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15) [ 2.863034] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 2.863908] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15) [ 2.864641] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 2.865031] vgaarb: loaded [ 2.865366] SCSI subsystem initialized [ 2.865659] libata version 3.00 loaded. [ 2.865784] usbcore: registered new interface driver usbfs [ 2.866030] usbcore: registered new interface driver hub [ 2.866280] usbcore: registered new device driver usb [ 2.866632] PCI: Using ACPI for IRQ routing [ 2.866846] PCI: pci_cache_line_size set to 64 bytes [ 2.866910] reserve RAM buffer: 000000000009ec00 - 000000000009ffff [ 2.866912] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff [ 2.867138] cfg80211: Calling CRDA to update world regulatory domain [ 2.867418] NetLabel: Initializing [ 2.867630] NetLabel: domain hash size = 128 [ 2.867843] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.868077] NetLabel: unlabeled traffic allowed by default [ 2.868296] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 2.868519] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 2.868909] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 2.932024] Switching to clocksource hpet [ 2.935566] pnp: PnP ACPI init [ 2.935791] ACPI: bus type pnp registered [ 2.936085] pnp 00:00: [bus 00-ff] [ 2.936087] pnp 00:00: [io 0x0cf8-0x0cff] [ 2.936089] pnp 00:00: [io 0x0000-0x0cf7 window] [ 2.936091] pnp 00:00: [io 0x0d00-0xffff window] [ 2.936093] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 2.936094] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 2.936096] pnp 00:00: [mem 0xc0000000-0xdfffffff window] [ 2.936098] pnp 00:00: [mem 0xf0000000-0xfed8ffff window] [ 2.936163] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 2.936173] pnp 00:01: [mem 0xfbf00000-0xfbffffff] [ 2.936175] pnp 00:01: [mem 0xfc000000-0xfcffffff] [ 2.936177] pnp 00:01: [mem 0xfd000000-0xfdffffff] [ 2.936178] pnp 00:01: [mem 0xfe000000-0xfebfffff] [ 2.936180] pnp 00:01: [mem 0xfec8a000-0xfec8afff] [ 2.936181] pnp 00:01: [mem 0xfed10000-0xfed10fff] [ 2.936244] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved [ 2.936463] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 2.936681] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 2.936899] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved [ 2.937117] system 00:01: [mem 0xfec8a000-0xfec8afff] has been reserved [ 2.937336] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved [ 2.937554] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.937580] pnp 00:02: [dma 4] [ 2.937582] pnp 00:02: [io 0x0000-0x000f] [ 2.937583] pnp 00:02: [io 0x0081-0x0083] [ 2.937585] pnp 00:02: [io 0x0087] [ 2.937586] pnp 00:02: [io 0x0089-0x008b] [ 2.937588] pnp 00:02: [io 0x008f] [ 2.937589] pnp 00:02: [io 0x00c0-0x00df] [ 2.937634] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.937645] pnp 00:03: [io 0x0070-0x0071] [ 2.937652] pnp 00:03: [irq 8] [ 2.937699] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.937707] pnp 00:04: [io 0x0061] [ 2.937753] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 2.937762] pnp 00:05: [io 0x00f0-0x00ff] [ 2.937767] pnp 00:05: [irq 13] [ 2.937814] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.938018] pnp 00:06: [io 0x03f8-0x03ff] [ 2.938023] pnp 00:06: [irq 4] [ 2.938025] pnp 00:06: [dma 0 disabled] [ 2.938104] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.938131] pnp 00:07: [io 0x0060] [ 2.938132] pnp 00:07: [io 0x0064] [ 2.938137] pnp 00:07: [irq 1] [ 2.938184] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 2.938271] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 2.938273] pnp 00:08: [io 0x0a00-0x0adf] [ 2.938275] pnp 00:08: [io 0x0ae0-0x0aef] [ 2.938339] system 00:08: [io 0x0a00-0x0adf] has been reserved [ 2.938556] system 00:08: [io 0x0ae0-0x0aef] has been reserved [ 2.938774] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.938869] pnp 00:09: [io 0x0010-0x001f] [ 2.938871] pnp 00:09: [io 0x0022-0x002d] [ 2.938873] pnp 00:09: [io 0x0030-0x003f] [ 2.938874] pnp 00:09: [io 0x0044-0x005f] [ 2.938875] pnp 00:09: [io 0x0062-0x0063] [ 2.938877] pnp 00:09: [io 0x0065-0x006f] [ 2.938878] pnp 00:09: [io 0x0072-0x007f] [ 2.938880] pnp 00:09: [io 0x0080] [ 2.938881] pnp 00:09: [io 0x0084-0x0086] [ 2.938882] pnp 00:09: [io 0x0088] [ 2.938884] pnp 00:09: [io 0x008c-0x008e] [ 2.938885] pnp 00:09: [io 0x0090-0x009f] [ 2.938887] pnp 00:09: [io 0x00a2-0x00bf] [ 2.938888] pnp 00:09: [io 0x00e0-0x00ef] [ 2.938890] pnp 00:09: [io 0x04d0-0x04d1] [ 2.938891] pnp 00:09: [io 0x0800-0x087f] [ 2.938893] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled] [ 2.938894] pnp 00:09: [io 0x0500-0x057f] [ 2.938896] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 2.938898] pnp 00:09: [mem 0xfed10000-0xfed103ff] [ 2.938899] pnp 00:09: [mem 0xfed10400-0xfed107ff] [ 2.938901] pnp 00:09: [mem 0xfed10800-0xfed10bff] [ 2.938902] pnp 00:09: [mem 0xfed10c00-0xfed10fff] [ 2.938904] pnp 00:09: [mem 0xfec8a000-0xfec8a3ff] [ 2.938905] pnp 00:09: [mem 0xfec8a400-0xfec8a7ff] [ 2.938907] pnp 00:09: [mem 0xfec8a800-0xfec8abff] [ 2.938909] pnp 00:09: [mem 0xfec8ac00-0xfec8afff] [ 2.938910] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 2.938912] pnp 00:09: [mem 0xfed45000-0xfed89fff] [ 2.938913] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 2.938915] pnp 00:09: [mem 0xfed40000-0xfed8ffff] [ 2.938999] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 2.939217] system 00:09: [io 0x0800-0x087f] has been reserved [ 2.939433] system 00:09: [io 0x0500-0x057f] has been reserved [ 2.939650] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.939869] system 00:09: [mem 0xfed10000-0xfed103ff] has been reserved [ 2.940087] system 00:09: [mem 0xfed10400-0xfed107ff] has been reserved [ 2.940305] system 00:09: [mem 0xfed10800-0xfed10bff] has been reserved [ 2.940523] system 00:09: [mem 0xfed10c00-0xfed10fff] has been reserved [ 2.940741] system 00:09: [mem 0xfec8a000-0xfec8a3ff] has been reserved [ 2.940959] system 00:09: [mem 0xfec8a400-0xfec8a7ff] has been reserved [ 2.941177] system 00:09: [mem 0xfec8a800-0xfec8abff] has been reserved [ 2.941395] system 00:09: [mem 0xfec8ac00-0xfec8afff] has been reserved [ 2.941613] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.941831] system 00:09: [mem 0xfed45000-0xfed89fff] has been reserved [ 2.941893] Switched to NOHz mode on CPU #0 [ 2.941949] Switched to NOHz mode on CPU #7 [ 2.941953] Switched to NOHz mode on CPU #6 [ 2.941960] Switched to NOHz mode on CPU #4 [ 2.941972] Switched to NOHz mode on CPU #5 [ 2.942001] Switched to NOHz mode on CPU #3 [ 2.942010] Switched to NOHz mode on CPU #2 [ 2.943534] Switched to NOHz mode on CPU #1 [ 2.943749] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.943967] system 00:09: [mem 0xfed40000-0xfed8ffff] could not be reserved [ 2.944187] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.944235] pnp 00:0a: [mem 0xfed00000-0xfed003ff] [ 2.944295] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.944362] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 2.944364] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 2.944428] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 2.944647] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 2.944866] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.944905] pnp 00:0c: [mem 0xe0000000-0xefffffff] [ 2.944970] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 2.945189] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.945346] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 2.945350] pnp 00:0d: [mem 0x000c0000-0x000cffff] [ 2.945352] pnp 00:0d: [mem 0x000e0000-0x000fffff] [ 2.945354] pnp 00:0d: [mem 0x00100000-0xbfffffff] [ 2.945355] pnp 00:0d: [mem 0xfed90000-0xffffffff] [ 2.945429] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 2.945649] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved [ 2.945867] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 2.946086] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved [ 2.946305] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved [ 2.946525] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.946629] pnp: PnP ACPI: found 14 devices [ 2.946841] ACPI: ACPI bus type pnp unregistered [ 2.954818] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff] [ 2.955038] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref] [ 2.955428] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.955645] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 2.955860] pci 0000:00:01.0: bridge window [io disabled] [ 2.956077] pci 0000:00:01.0: bridge window [mem disabled] [ 2.956294] pci 0000:00:01.0: bridge window [mem pref disabled] [ 2.956513] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 2.956729] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 2.956947] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff] [ 2.957166] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.957558] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 2.957772] pci 0000:00:07.0: bridge window [io disabled] [ 2.957990] pci 0000:00:07.0: bridge window [mem disabled] [ 2.958207] pci 0000:00:07.0: bridge window [mem pref disabled] [ 2.958426] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 2.958641] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 2.958860] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] [ 2.959079] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 2.959472] pci 0000:06:00.0: BAR 6: assigned [mem 0xf6f00000-0xf6f1ffff pref] [ 2.959860] pci 0000:00:1c.4: PCI bridge to [bus 06-06] [ 2.960076] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 2.960294] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff] [ 2.960514] pci 0000:00:1c.4: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 2.960906] pci 0000:00:1e.0: PCI bridge to [bus 07-07] [ 2.961121] pci 0000:00:1e.0: bridge window [io disabled] [ 2.961339] pci 0000:00:1e.0: bridge window [mem disabled] [ 2.961556] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 2.961780] pci 0000:00:01.0: setting latency timer to 64 [ 2.961785] pci 0000:00:03.0: setting latency timer to 64 [ 2.961791] pci 0000:00:07.0: setting latency timer to 64 [ 2.961795] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 2.962018] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.962243] pci 0000:00:1c.0: setting latency timer to 64 [ 2.962249] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.962468] pci 0000:00:1c.4: setting latency timer to 64 [ 2.962473] pci 0000:00:1e.0: setting latency timer to 64 [ 2.962476] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.962478] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.962480] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.962481] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 2.962483] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 2.962485] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] [ 2.962487] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 2.962489] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbcfffff] [ 2.962490] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 2.962493] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 2.962494] pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc01fffff] [ 2.962496] pci_bus 0000:04: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] [ 2.962498] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] [ 2.962500] pci_bus 0000:06: resource 1 [mem 0xfbe00000-0xfbefffff] [ 2.962501] pci_bus 0000:06: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 2.962503] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7] [ 2.962505] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff] [ 2.962507] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff] [ 2.962509] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff] [ 2.962510] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff] [ 2.962512] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff] [ 2.962537] NET: Registered protocol family 2 [ 2.962943] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 2.964226] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.966058] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.966460] TCP: Hash tables configured (established 524288 bind 65536) [ 2.966678] TCP reno registered [ 2.966900] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.967152] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.967495] NET: Registered protocol family 1 [ 2.967797] RPC: Registered udp transport module. [ 2.968011] RPC: Registered tcp transport module. [ 2.968224] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.968462] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 2.968464] pci 0000:00:1a.0: Performing full reset [ 2.968479] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 2.968481] pci 0000:00:1a.1: Performing full reset [ 2.968495] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 2.968497] pci 0000:00:1a.2: Performing full reset [ 2.968536] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 2.968538] pci 0000:00:1d.0: Performing full reset [ 2.968552] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 2.968554] pci 0000:00:1d.1: Performing full reset [ 2.968569] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 2.968571] pci 0000:00:1d.2: Performing full reset [ 2.968623] pci 0000:02:00.0: Boot video device [ 2.968628] PCI: CLS 256 bytes, default 64 [ 2.968675] Trying to unpack rootfs image as initramfs... [ 3.039604] Freeing initrd memory: 4160k freed [ 3.040465] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.040683] Placing 64MB software IO TLB between ffff8800bb400000 - ffff8800bf400000 [ 3.041072] software IO TLB at phys 0xbb400000 - 0xbf400000 [ 3.043993] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11 [ 3.044212] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11 [ 3.044433] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11 [ 3.044654] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11 [ 3.044874] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11 [ 3.045096] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11 [ 3.045318] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11 [ 3.045538] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11 [ 3.045795] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 3.046474] audit: initializing netlink socket (disabled) [ 3.046696] type=2000 audit(1302877049.860:1): initialized [ 3.047463] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.053984] VFS: Disk quotas dquot_6.5.2 [ 3.054268] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.056044] fuse init (API version 7.16) [ 3.056525] JFS: nTxBlock = 8192, nTxLock = 65536 [ 3.058203] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 3.059451] SGI XFS Quota Management subsystem [ 3.063932] msgmni has been set to 15982 [ 3.064237] SELinux: Registering netfilter hooks [ 3.065175] NET: Registered protocol family 38 [ 3.065473] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.065880] io scheduler noop registered [ 3.066093] io scheduler deadline registered [ 3.066394] io scheduler cfq registered (default) [ 3.066812] pcieport 0000:00:1c.0: setting latency timer to 64 [ 3.066849] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 3.066929] pcieport 0000:00:1c.4: setting latency timer to 64 [ 3.066962] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X [ 3.067192] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.067491] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.067709] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 3.068957] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed [ 3.069184] intel_idle: MWAIT substates: 0x1120 [ 3.069195] intel_idle: v0.4 model 0x1A [ 3.069196] intel_idle: lapic_timer_reliable_states 0x2 [ 3.069596] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 3.069988] ACPI: Power Button [PWRB] [ 3.070260] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.070650] ACPI: Power Button [PWRF] [ 3.070929] ACPI: acpi_idle yielding to intel_idle [ 3.072484] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.371396] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.000533] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.029850] Refined TSC clocksource calibration: 2806.964 MHz. [ 4.030073] Switching to clocksource tsc [ 4.179862] Non-volatile memory driver v1.3 [ 4.180140] Linux agpgart interface v0.103 [ 4.180463] ipmi message handler version 39.2 [ 4.180679] ipmi device interface [ 4.180939] IPMI System Interface driver. [ 4.181209] ipmi_si: Adding default-specified kcs state machine [ 4.181461] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 4.181856] ipmi_si: Interface detection failed [ 4.259316] ipmi_si: Adding default-specified smic state machine [ 4.259576] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 4.259970] ipmi_si: Interface detection failed [ 4.339140] ipmi_si: Adding default-specified bt state machine [ 4.339399] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 4.339794] ipmi_si: Interface detection failed [ 4.429047] ipmi_si: Unable to find any System Interface(s) [ 4.429263] IPMI Watchdog: driver initialized [ 4.429623] [drm] Initialized drm 1.1.0 20060810 [ 4.431383] brd: module loaded [ 4.432356] loop: module loaded [ 4.432697] nbd: registered device at major 43 [ 4.434737] ahci 0000:00:1f.2: version 3.0 [ 4.434751] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.435002] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 4.435021] ahci: SSS flag set, parallel bus scan disabled [ 4.435271] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 4.435662] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 4.436054] ahci 0000:00:1f.2: setting latency timer to 64 [ 4.529579] scsi0 : ahci [ 4.529972] scsi1 : ahci [ 4.530271] scsi2 : ahci [ 4.530569] scsi3 : ahci [ 4.530868] scsi4 : ahci [ 4.531167] scsi5 : ahci [ 4.531533] ata1: SATA max UDMA/133 abar m2048@0xf7ffa000 port 0xf7ffa100 irq 42 [ 4.531922] ata2: SATA max UDMA/133 abar m2048@0xf7ffa000 port 0xf7ffa180 irq 42 [ 4.532312] ata3: SATA max UDMA/133 abar m2048@0xf7ffa000 port 0xf7ffa200 irq 42 [ 4.532701] ata4: SATA max UDMA/133 abar m2048@0xf7ffa000 port 0xf7ffa280 irq 42 [ 4.533090] ata5: SATA max UDMA/133 abar m2048@0xf7ffa000 port 0xf7ffa300 irq 42 [ 4.533479] ata6: SATA max UDMA/133 abar m2048@0xf7ffa000 port 0xf7ffa380 irq 42 [ 4.534085] TARGET_CORE[0]: Loading Generic Kernel Storage Engine: v4.0.0-rc6 on Linux/x86_64 on 2.6.38-hardened [ 4.534883] TARGET_CORE[0]: Initialized ConfigFS Fabric Infrastructure: v4.0.0-rc6 on Linux/x86_64 on 2.6.38-hardened [ 4.535278] TCM: Registered subsystem plugin: rd_dr struct module: (nil) [ 4.535667] TCM: Registered subsystem plugin: rd_mcp struct module: (nil) [ 4.536057] CORE_HBA[0] - TCM Ramdisk HBA Driver v4.0 on Generic Target Core Stack v4.0.0-rc6 [ 4.536447] CORE_HBA[0] - Attached Ramdisk HBA: 0 to Generic Target Core TCQ Depth: 256 MaxSectors: 1024 [ 4.536838] CORE_HBA[0] - Attached HBA to Generic Target Core [ 4.537055] RAMDISK: Referencing Page Count: 8 [ 4.537272] CORE_RD[0] - Built Ramdisk Device ID: 0 space of 8 pages in 1 tables [ 4.537661] rd_dr: Using SPC_PASSTHROUGH, no reservation emulation [ 4.537878] rd_dr: Using SPC_ALUA_PASSTHROUGH, no ALUA emulation [ 4.538110] Vendor: LIO-ORG Model: RAMDISK-DR Revision: 4.0 [ 4.539412] Type: Direct-Access ANSI SCSI revision: 05 [ 4.539835] CORE_RD[0] - Added TCM DIRECT Ramdisk Device ID: 0 of 8 pages in 1 tables, 32768 total bytes [ 4.540227] TCM: Registered subsystem plugin: iblock struct module: (nil) [ 4.540616] TCM: Registered subsystem plugin: fileio struct module: (nil) [ 4.541005] TCM: Registered subsystem plugin: pscsi struct module: (nil) [ 4.541394] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 4.541611] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 4.541860] Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2 [ 4.542078] Copyright (c) 2007-2009 Intel Corporation. [ 4.542319] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 4.542536] e100: Copyright(c) 1999-2006 Intel Corporation [ 4.542806] sky2: driver version 1.28 [ 4.543104] tun: Universal TUN/TAP device driver, 1.6 [ 4.543318] tun: (C) 1999-2004 Max Krasnyansky [ 4.543574] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.543806] r8169 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.544050] r8169 0000:06:00.0: setting latency timer to 64 [ 4.544097] r8169 0000:06:00.0: irq 43 for MSI/MSI-X [ 4.544301] r8169 0000:06:00.0: eth0: RTL8168c/8111c at 0xffffc90011d52000, 6c:62:6d:7a:e8:19, XID 1c4000c0 IRQ 43 [ 4.628553] console [netcon0] enabled [ 4.628769] netconsole: network logging started [ 4.629077] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.629295] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 4.629313] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.629541] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 4.629544] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 4.629769] drivers/usb/core/inode.c: creating file 'devices' [ 4.629772] drivers/usb/core/inode.c: creating file '001' [ 4.629814] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 4.708324] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 4.708330] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 4.708361] ehci_hcd 0000:00:1a.7: debug port 1 [ 4.708583] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.712466] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported [ 4.712468] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 4.712479] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7ffe000 [ 4.712697] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.716576] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 4.728279] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.728517] usb usb1: default language 0x0409 [ 4.728522] usb usb1: udev 1, busnum 1, minor = 0 [ 4.728524] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.728742] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.729130] usb usb1: Product: EHCI Host Controller [ 4.729344] usb usb1: Manufacturer: Linux 2.6.38-hardened ehci_hcd [ 4.729561] usb usb1: SerialNumber: 0000:00:1a.7 [ 4.729829] usb usb1: usb_probe_device [ 4.729832] usb usb1: configuration #1 chosen from 1 choice [ 4.729837] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 4.729872] hub 1-0:1.0: usb_probe_interface [ 4.729874] hub 1-0:1.0: usb_probe_interface - got id [ 4.729875] hub 1-0:1.0: USB hub found [ 4.730090] hub 1-0:1.0: 6 ports detected [ 4.730302] hub 1-0:1.0: standalone hub [ 4.730303] hub 1-0:1.0: no power switching (usb 1.0) [ 4.730305] hub 1-0:1.0: individual port over-current protection [ 4.730306] hub 1-0:1.0: power on to power good time: 20ms [ 4.730309] hub 1-0:1.0: local power source is good [ 4.730311] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 4.730340] drivers/usb/core/inode.c: creating file '001' [ 4.730376] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.730605] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 4.730608] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.730825] drivers/usb/core/inode.c: creating file '002' [ 4.730869] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 4.828075] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 4.828080] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 4.828086] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 4.828114] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.828334] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.832197] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported [ 4.832198] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 4.832211] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffc000 [ 4.832428] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.836306] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 4.848013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.848252] usb usb2: default language 0x0409 [ 4.848257] usb usb2: udev 1, busnum 2, minor = 128 [ 4.848259] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.848477] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.848864] usb usb2: Product: EHCI Host Controller [ 4.849078] usb usb2: Manufacturer: Linux 2.6.38-hardened ehci_hcd [ 4.849295] usb usb2: SerialNumber: 0000:00:1d.7 [ 4.849562] usb usb2: usb_probe_device [ 4.849564] usb usb2: configuration #1 chosen from 1 choice [ 4.849569] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 4.849603] hub 2-0:1.0: usb_probe_interface [ 4.849605] hub 2-0:1.0: usb_probe_interface - got id [ 4.849607] hub 2-0:1.0: USB hub found [ 4.849820] hub 2-0:1.0: 6 ports detected [ 4.850033] hub 2-0:1.0: standalone hub [ 4.850034] hub 2-0:1.0: no power switching (usb 1.0) [ 4.850035] hub 2-0:1.0: individual port over-current protection [ 4.850037] hub 2-0:1.0: power on to power good time: 20ms [ 4.850040] hub 2-0:1.0: local power source is good [ 4.850041] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 4.850070] drivers/usb/core/inode.c: creating file '001' [ 4.850118] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.850335] ohci_hcd: block sizes: ed 80 td 96 [ 4.850363] uhci_hcd: USB Universal Host Controller Interface driver [ 4.850632] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.850854] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.850857] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.851075] drivers/usb/core/inode.c: creating file '003' [ 4.851116] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 4.877955] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.884566] ata1.00: ATA-7: SAMSUNG HD753LJ, 1AA01118, max UDMA7 [ 4.884788] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.891425] ata1.00: configured for UDMA/133 [ 4.891730] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 [ 4.892273] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 4.892338] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.892947] sd 0:0:0:0: [sda] Write Protect is off [ 4.893162] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.893187] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.906585] sda: sda1 sda2 sda3 sda4 [ 4.907142] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.947812] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 4.947816] uhci_hcd 0000:00:1a.0: detected 2 ports [ 4.947822] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.947824] uhci_hcd 0000:00:1a.0: Performing full reset [ 4.947839] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 4.947858] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00 [ 4.947887] usb usb3: default language 0x0409 [ 4.947892] usb usb3: udev 1, busnum 3, minor = 256 [ 4.947893] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.947895] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.947896] usb usb3: Product: UHCI Host Controller [ 4.947898] usb usb3: Manufacturer: Linux 2.6.38-hardened uhci_hcd [ 4.947899] usb usb3: SerialNumber: 0000:00:1a.0 [ 4.947966] usb usb3: usb_probe_device [ 4.947968] usb usb3: configuration #1 chosen from 1 choice [ 4.947973] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 4.948014] hub 3-0:1.0: usb_probe_interface [ 4.948016] hub 3-0:1.0: usb_probe_interface - got id [ 4.948017] hub 3-0:1.0: USB hub found [ 4.948021] hub 3-0:1.0: 2 ports detected [ 4.948022] hub 3-0:1.0: standalone hub [ 4.948023] hub 3-0:1.0: no power switching (usb 1.0) [ 4.948024] hub 3-0:1.0: individual port over-current protection [ 4.948026] hub 3-0:1.0: power on to power good time: 2ms [ 4.948028] hub 3-0:1.0: local power source is good [ 4.948030] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 4.948044] drivers/usb/core/inode.c: creating file '001' [ 4.948074] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 4.948092] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 4.948096] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 4.948099] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 4.948102] drivers/usb/core/inode.c: creating file '004' [ 4.948149] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 5.037592] uhci_hcd 0000:00:1a.1: detected 2 ports [ 5.037815] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.037817] uhci_hcd 0000:00:1a.1: Performing full reset [ 5.037829] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 5.037840] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 5.042323] usb usb4: default language 0x0409 [ 5.042328] usb usb4: udev 1, busnum 4, minor = 384 [ 5.042330] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.042548] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.042935] usb usb4: Product: UHCI Host Controller [ 5.043149] usb usb4: Manufacturer: Linux 2.6.38-hardened uhci_hcd [ 5.043366] usb usb4: SerialNumber: 0000:00:1a.1 [ 5.043639] usb usb4: usb_probe_device [ 5.043641] usb usb4: configuration #1 chosen from 1 choice [ 5.043646] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 5.043687] hub 4-0:1.0: usb_probe_interface [ 5.043689] hub 4-0:1.0: usb_probe_interface - got id [ 5.043691] hub 4-0:1.0: USB hub found [ 5.043905] hub 4-0:1.0: 2 ports detected [ 5.044117] hub 4-0:1.0: standalone hub [ 5.044118] hub 4-0:1.0: no power switching (usb 1.0) [ 5.044120] hub 4-0:1.0: individual port over-current protection [ 5.044121] hub 4-0:1.0: power on to power good time: 2ms [ 5.044124] hub 4-0:1.0: local power source is good [ 5.044126] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 5.044142] drivers/usb/core/inode.c: creating file '001' [ 5.044170] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 5.044182] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 5.044404] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 5.044406] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 5.044623] drivers/usb/core/inode.c: creating file '005' [ 5.044669] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 5.047589] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.117415] uhci_hcd 0000:00:1a.2: detected 2 ports [ 5.117637] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.117639] uhci_hcd 0000:00:1a.2: Performing full reset [ 5.117651] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 5.117662] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800 [ 5.117899] usb usb5: default language 0x0409 [ 5.117904] usb usb5: udev 1, busnum 5, minor = 512 [ 5.117906] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.118124] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.118512] usb usb5: Product: UHCI Host Controller [ 5.118726] usb usb5: Manufacturer: Linux 2.6.38-hardened uhci_hcd [ 5.118942] usb usb5: SerialNumber: 0000:00:1a.2 [ 5.119215] usb usb5: usb_probe_device [ 5.119218] usb usb5: configuration #1 chosen from 1 choice [ 5.119222] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 5.119264] hub 5-0:1.0: usb_probe_interface [ 5.119266] hub 5-0:1.0: usb_probe_interface - got id [ 5.119267] hub 5-0:1.0: USB hub found [ 5.119481] hub 5-0:1.0: 2 ports detected [ 5.119694] hub 5-0:1.0: standalone hub [ 5.119695] hub 5-0:1.0: no power switching (usb 1.0) [ 5.119696] hub 5-0:1.0: individual port over-current protection [ 5.119698] hub 5-0:1.0: power on to power good time: 2ms [ 5.119700] hub 5-0:1.0: local power source is good [ 5.119702] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 5.119717] drivers/usb/core/inode.c: creating file '001' [ 5.119744] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 5.119757] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.119978] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.119981] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.120198] drivers/usb/core/inode.c: creating file '006' [ 5.120252] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 5.137383] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.187263] uhci_hcd 0000:00:1d.0: detected 2 ports [ 5.187485] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.187487] uhci_hcd 0000:00:1d.0: Performing full reset [ 5.187499] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 5.187504] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480 [ 5.187743] usb usb6: default language 0x0409 [ 5.187748] usb usb6: udev 1, busnum 6, minor = 640 [ 5.187750] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.187967] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.188355] usb usb6: Product: UHCI Host Controller [ 5.188570] usb usb6: Manufacturer: Linux 2.6.38-hardened uhci_hcd [ 5.188786] usb usb6: SerialNumber: 0000:00:1d.0 [ 5.189059] usb usb6: usb_probe_device [ 5.189061] usb usb6: configuration #1 chosen from 1 choice [ 5.189066] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 5.189106] hub 6-0:1.0: usb_probe_interface [ 5.189108] hub 6-0:1.0: usb_probe_interface - got id [ 5.189109] hub 6-0:1.0: USB hub found [ 5.189323] hub 6-0:1.0: 2 ports detected [ 5.189535] hub 6-0:1.0: standalone hub [ 5.189536] hub 6-0:1.0: no power switching (usb 1.0) [ 5.189538] hub 6-0:1.0: individual port over-current protection [ 5.189539] hub 6-0:1.0: power on to power good time: 2ms [ 5.189542] hub 6-0:1.0: local power source is good [ 5.189544] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 5.189562] drivers/usb/core/inode.c: creating file '001' [ 5.189591] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 5.189601] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.189823] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.189825] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.190042] drivers/usb/core/inode.c: creating file '007' [ 5.190094] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 5.217236] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.277062] uhci_hcd 0000:00:1d.1: detected 2 ports [ 5.277284] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.277286] uhci_hcd 0000:00:1d.1: Performing full reset [ 5.277298] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 5.277302] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 5.277540] usb usb7: default language 0x0409 [ 5.277545] usb usb7: udev 1, busnum 7, minor = 768 [ 5.277547] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.277765] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.278153] usb usb7: Product: UHCI Host Controller [ 5.278367] usb usb7: Manufacturer: Linux 2.6.38-hardened uhci_hcd [ 5.278583] usb usb7: SerialNumber: 0000:00:1d.1 [ 5.278855] usb usb7: usb_probe_device [ 5.278858] usb usb7: configuration #1 chosen from 1 choice [ 5.278863] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 5.278901] hub 7-0:1.0: usb_probe_interface [ 5.278903] hub 7-0:1.0: usb_probe_interface - got id [ 5.278905] hub 7-0:1.0: USB hub found [ 5.279119] hub 7-0:1.0: 2 ports detected [ 5.279331] hub 7-0:1.0: standalone hub [ 5.279332] hub 7-0:1.0: no power switching (usb 1.0) [ 5.279333] hub 7-0:1.0: individual port over-current protection [ 5.279335] hub 7-0:1.0: power on to power good time: 2ms [ 5.279338] hub 7-0:1.0: local power source is good [ 5.279339] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 5.279356] drivers/usb/core/inode.c: creating file '001' [ 5.279384] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 5.279395] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.279617] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.279619] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.279836] drivers/usb/core/inode.c: creating file '008' [ 5.279885] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 5.287058] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.346908] uhci_hcd 0000:00:1d.2: detected 2 ports [ 5.347130] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.347132] uhci_hcd 0000:00:1d.2: Performing full reset [ 5.347144] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 5.347149] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080 [ 5.347385] usb usb8: default language 0x0409 [ 5.347390] usb usb8: udev 1, busnum 8, minor = 896 [ 5.347392] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.347610] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.347998] usb usb8: Product: UHCI Host Controller [ 5.348212] usb usb8: Manufacturer: Linux 2.6.38-hardened uhci_hcd [ 5.348429] usb usb8: SerialNumber: 0000:00:1d.2 [ 5.348702] usb usb8: usb_probe_device [ 5.348704] usb usb8: configuration #1 chosen from 1 choice [ 5.348709] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 5.348749] hub 8-0:1.0: usb_probe_interface [ 5.348751] hub 8-0:1.0: usb_probe_interface - got id [ 5.348753] hub 8-0:1.0: USB hub found [ 5.348967] hub 8-0:1.0: 2 ports detected [ 5.349179] hub 8-0:1.0: standalone hub [ 5.349180] hub 8-0:1.0: no power switching (usb 1.0) [ 5.349182] hub 8-0:1.0: individual port over-current protection [ 5.349183] hub 8-0:1.0: power on to power good time: 2ms [ 5.349186] hub 8-0:1.0: local power source is good [ 5.349187] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 5.349204] drivers/usb/core/inode.c: creating file '001' [ 5.349232] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 5.349301] usbcore: registered new interface driver usblp [ 5.349517] Initializing USB Mass Storage driver... [ 5.349781] usbcore: registered new interface driver usb-storage [ 5.349997] USB Mass Storage support registered. [ 5.350257] usbcore: registered new interface driver libusual [ 5.376852] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.426824] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 5.427043] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 5.428083] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.428382] mousedev: PS/2 mouse device common for all mice [ 5.428772] rtc_cmos 00:03: RTC can wake from S4 [ 5.446727] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.482459] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 5.516609] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 5.516850] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 5.517096] i2c /dev entries driver [ 5.517401] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.517906] Driver for 1-wire Dallas network protocol. [ 5.518258] coretemp coretemp.0: TjMax is 100 C. [ 5.518552] coretemp coretemp.1: TjMax is 100 C. [ 5.518840] coretemp coretemp.2: TjMax is 100 C. [ 5.519129] coretemp coretemp.3: TjMax is 100 C. [ 5.636281] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.642881] ata2.00: ATA-7: SAMSUNG HD753LJ, 1AA01118, max UDMA7 [ 5.643103] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 5.649746] ata2.00: configured for UDMA/133 [ 5.650059] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 [ 5.650600] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 5.650654] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.651259] sd 1:0:0:0: [sdb] Write Protect is off [ 5.651473] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.651498] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.670889] sdb: sdb1 sdb2 sdb3 sdb4 [ 5.671428] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.835828] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 5.836147] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860) [ 5.836422] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.836640] iTCO_vendor_support: vendor-support=0 [ 5.836854] md: linear personality registered for level -1 [ 5.837069] md: raid0 personality registered for level 0 [ 5.837283] md: raid1 personality registered for level 1 [ 5.837498] md: raid10 personality registered for level 10 [ 5.837713] md: raid6 personality registered for level 6 [ 5.837928] md: raid5 personality registered for level 5 [ 5.838142] md: raid4 personality registered for level 4 [ 5.838357] md: multipath personality registered for level -4 [ 5.838874] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 5.839381] device-mapper: multipath: version 1.2.0 loaded [ 5.839597] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.839992] EDAC MC: Ver: 2.1.0 Apr 15 2011 [ 5.840331] EDAC i7core: Driver loaded. [ 5.841396] cpuidle: using governor ladder [ 5.843154] cpuidle: using governor menu [ 5.843508] GACT probability on [ 5.843720] Mirror/redirect action on [ 5.844151] u32 classifier [ 5.844361] Performance counters on [ 5.844572] Actions configured [ 5.844785] Netfilter messages via NETLINK v0.30. [ 5.845010] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.845388] ctnetlink v0.93: registering with nfnetlink. [ 5.845776] IPv4 over IPv4 tunneling driver [ 5.846245] GRE over IPv4 demultiplexor driver [ 5.846290] GRE over IPv4 tunneling driver [ 5.847133] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.847379] TCP cubic registered [ 5.847591] Initializing XFRM netlink socket [ 5.848102] NET: Registered protocol family 10 [ 5.849903] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 5.850163] IPv6 over IPv4 tunneling driver [ 5.851504] NET: Registered protocol family 17 [ 5.851788] 802.1Q VLAN Support v1.8 Ben Greear [ 5.852006] All bugs added by David S. Miller [ 5.852226] Registering the dns_resolver key type [ 5.854483] PM: Hibernation image not present or could not be loaded. [ 5.854489] registered taskstats version 1 [ 5.886237] IMA: No TPM chip found, activating TPM-bypass! [ 5.886795] Magic number: 7:318:283 [ 5.965825] usb usb3: suspend_rh (auto-stop) [ 5.995760] ata3: SATA link down (SStatus 0 SControl 300) [ 6.215068] usb usb4: suspend_rh (auto-stop) [ 6.215089] usb usb5: suspend_rh (auto-stop) [ 6.215110] usb usb6: suspend_rh (auto-stop) [ 6.344842] ata4: SATA link down (SStatus 0 SControl 300) [ 6.464510] usb usb7: suspend_rh (auto-stop) [ 6.464532] usb usb8: suspend_rh (auto-stop) [ 6.694062] ata5: SATA link down (SStatus 0 SControl 300) [ 7.043286] ata6: SATA link down (SStatus 0 SControl 300) [ 7.044059] Freeing unused kernel memory: 532k freed [ 7.051877] grsec: mount of proc to /proc by /bin/busybox[mount:1619] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0 [ 7.115692] cut used greatest stack depth: 4800 bytes left [ 7.181164] grsec: mount of sysfs to /sys by /bin/busybox[mount:2044] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0 [ 7.528230] grsec: mount of udev to /dev by /bin/busybox[mount:3003] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0 [ 7.529340] grsec: mount of devpts to /dev/pts by /bin/busybox[mount:3005] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0 [ 7.562420] md: Autodetecting RAID arrays. [ 7.633616] md: Scanned 6 and added 6 devices. [ 7.633618] md: autorun ... [ 7.633621] md: considering sdb4 ... [ 7.633627] md: adding sdb4 ... [ 7.633631] md: sdb3 has different UUID to sdb4 [ 7.633635] md: sdb1 has different UUID to sdb4 [ 7.633639] md: adding sda4 ... [ 7.633643] md: sda3 has different UUID to sdb4 [ 7.633647] md: sda1 has different UUID to sdb4 [ 7.634205] md: created md4 [ 7.634208] md: bind [ 7.634217] md: bind [ 7.634222] md: running: [ 7.640488] bio: create slab at 1 [ 7.640499] md/raid0:md4: looking at sdb4 [ 7.640502] md/raid0:md4: comparing sdb4(1428097920) with sdb4(1428097920) [ 7.640505] md/raid0:md4: END [ 7.640507] md/raid0:md4: ==> UNIQUE [ 7.640509] md/raid0:md4: 1 zones [ 7.640511] md/raid0:md4: looking at sda4 [ 7.640514] md/raid0:md4: comparing sda4(1428097920) with sdb4(1428097920) [ 7.640517] md/raid0:md4: EQUAL [ 7.640519] md/raid0:md4: FINAL 1 zones [ 7.640523] md/raid0:md4: done. [ 7.640526] md/raid0:md4: md_size is 2856195840 sectors. [ 7.640528] ******* md4 configuration ********* [ 7.640530] zone0=[sda4/sdb4/] [ 7.640534] zone offset=0kb device offset=0kb size=1428097920kb [ 7.640536] ********************************** [ 7.640537] [ 7.640550] md4: detected capacity change from 0 to 1462372270080 [ 7.640757] md: considering sdb3 ... [ 7.640763] md: adding sdb3 ... [ 7.640767] md: sdb1 has different UUID to sdb3 [ 7.640773] md: adding sda3 ... [ 7.640775] md: sda1 has different UUID to sdb3 [ 7.640778] md: created md3 [ 7.640780] md: bind [ 7.640787] md: bind [ 7.640792] md: running: [ 7.646616] md/raid1:md3: not clean -- starting background reconstruction [ 7.646620] md/raid1:md3: active with 2 out of 2 mirrors [ 7.646645] md3: detected capacity change from 0 to 10248585216 [ 7.646772] md: considering sdb1 ... [ 7.646778] md: adding sdb1 ... [ 7.646783] md: adding sda1 ... [ 7.646875] md: resync of RAID array md3 [ 7.646877] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 7.646878] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 7.646882] md: using 128k window, over a total of 10008384 blocks. [ 7.647148] md: created md1 [ 7.647150] md: bind [ 7.647159] md: bind [ 7.647168] md: running: [ 7.652376] md/raid1:md1: active with 2 out of 2 mirrors [ 7.652403] md1: detected capacity change from 0 to 518062080 [ 7.652595] md: ... autorun DONE. [ 7.759718] md1: unknown partition table [ 7.911771] md3: unknown partition table [ 7.926022] md4: unknown partition table [ 8.043866] lvm used greatest stack depth: 4408 bytes left [ 8.091362] EXT3-fs (md3): error: couldn't mount because of unsupported optional features (240) [ 8.161026] EXT2-fs (md3): error: couldn't mount because of unsupported optional features (244) [ 8.211738] EXT4-fs (md3): INFO: recovery required on readonly filesystem [ 8.211742] EXT4-fs (md3): write access will be enabled during recovery [ 8.251671] EXT4-fs (md3): recovery complete [ 8.251997] EXT4-fs (md3): mounted filesystem with ordered data mode. Opts: (null) [ 8.252014] grsec: mount of /dev/md3 to /newroot by /bin/busybox[mount:3095] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0 [ 8.310878] grsec: mount of /dev to /newroot/dev by /bin/busybox[mount:3105] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0 [ 8.312189] grsec: mount of /sys to /newroot/sys by /bin/busybox[mount:3107] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0 [ 8.313498] grsec: mount of /proc to /newroot/proc by /bin/busybox[mount:3109] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0 [ 8.319200] grsec: mount of . to / by /bin/busybox[switch_root:1] uid/euid:0/0 gid/egid:0/0, parent /[swapper:0] uid/euid:0/0 gid/egid:0/0 [ 8.582788] init-early.sh used greatest stack depth: 3992 bytes left [ 8.688652] grsec: mount of rc-svcdir to /lib64/rc/init.d by /bin/mount[mount:3130] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/init.sh[init.sh:3117] uid/euid:0/0 gid/egid:0/0 [ 9.366939] grsec: mount of securityfs to /sys/kernel/security by /bin/mount[mount:3318] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/runscript.sh[runscript.sh:3307] uid/euid:0/0 gid/egid:0/0 [ 9.373595] grsec: mount of debugfs to /sys/kernel/debug by /bin/mount[mount:3323] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/runscript.sh[runscript.sh:3307] uid/euid:0/0 gid/egid:0/0 [ 9.525381] <30>udev[3372]: starting version 167 [ 9.587467] grsec: mount of fusectl to /sys/fs/fuse/connections by /bin/mount[mount:3498] uid/euid:0/0 gid/egid:0/0, parent /sbin/udevd[udevd:3378] uid/euid:0/0 gid/egid:0/0 [ 9.732668] mdadm used greatest stack depth: 3320 bytes left [ 10.032518] grsec: mount of shm to /dev/shm by /bin/mount[mount:3569] uid/euid:0/0 gid/egid:0/0, parent /sbin/rc[fstabinfo:3568] uid/euid:0/0 gid/egid:0/0 [ 10.253980] grsec: time set by /sbin/hwclock[hwclock:3589] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/runscript.sh[runscript.sh:3588] uid/euid:0/0 gid/egid:0/0 [ 15.289322] EXT4-fs (md3): re-mounted. Opts: (null) [ 15.289336] grsec: mount of /dev/md3 to / by /bin/mount[mount:3674] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/runscript.sh[runscript.sh:3666] uid/euid:0/0 gid/egid:0/0 [ 15.655148] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 15.655159] grsec: mount of /dev/mapper/vg-usr to /usr by /bin/mount[mount:3785] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/runscript.sh[runscript.sh:3778] uid/euid:0/0 gid/egid:0/0 [ 15.748660] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 15.748668] grsec: mount of /dev/mapper/vg-var to /var by /bin/mount[mount:3785] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/runscript.sh[runscript.sh:3778] uid/euid:0/0 gid/egid:0/0 [ 15.783248] grsec: mount of /dev/mapper/vg-tmp to /tmp by /bin/mount[mount:3785] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/runscript.sh[runscript.sh:3778] uid/euid:0/0 gid/egid:0/0 [ 15.831310] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 15.831319] grsec: mount of /dev/mapper/vg-home to /home by /bin/mount[mount:3785] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/runscript.sh[runscript.sh:3778] uid/euid:0/0 gid/egid:0/0 [ 16.907374] r8169 0000:06:00.0: eth0: link down [ 16.907381] r8169 0000:06:00.0: eth0: link down [ 16.908473] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.953492] device eth0 entered promiscuous mode [ 17.056743] grsec: mount of usbfs to /proc/bus/usb by /bin/mount[mount:4070] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/runscript.sh[runscript.sh:4058] uid/euid:0/0 gid/egid:0/0 [ 17.066268] grsec: mount of binfmt_misc to /proc/sys/fs/binfmt_misc by /bin/mount[mount:4077] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/runscript.sh[runscript.sh:4058] uid/euid:0/0 gid/egid:0/0 [ 17.113460] Adding 8008396k swap on /dev/sda2. Priority:1 extents:1 across:8008396k [ 17.125866] Adding 8008396k swap on /dev/sdb2. Priority:1 extents:1 across:8008396k [ 17.365489] ADDRCONF(NETDEV_UP): tap0: link is not ready [ 17.383089] device tap0 entered promiscuous mode [ 17.502338] ADDRCONF(NETDEV_UP): tap1: link is not ready [ 17.519966] device tap1 entered promiscuous mode [ 19.010798] r8169 0000:06:00.0: eth0: link up [ 19.011943] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.012776] br0: port 1(eth0) entering forwarding state [ 19.012779] br0: port 1(eth0) entering forwarding state [ 28.545598] br0: no IPv6 routers present [ 29.423592] eth0: no IPv6 routers present [ 139.474852] md: md3: resync done. [ 139.512346] RAID1 conf printout: [ 139.512350] --- wd:2 rd:2 [ 139.512354] disk 0, wo:0, o:1, dev:sda3 [ 139.512358] disk 1, wo:0, o:1, dev:sdb3