dmesg output

dmesg.txt (text/plain), 30.68 KB, created by lkaratzas on 2011-03-16 19:13:13 UTC

0: setting latency timer to 64
[    0.157668] pci 0000:00:0d.0: setting latency timer to 64
[    0.157672] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.157675] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.157678] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.157682] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.157685] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.157688] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.157691] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.157694] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.157698] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.157701] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    0.157704] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.157708] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.157711] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.157714] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    0.157717] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[    0.157721] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff]
[    0.157725] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff]
[    0.157730] pci_bus 0000:02: resource 1 [mem 0xf6100000-0xf61fffff]
[    0.157734] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.157737] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.157741] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.157745] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.157749] pci_bus 0000:02: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.157753] pci_bus 0000:02: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.157757] pci_bus 0000:02: resource 10 [mem 0x000cc000-0x000cffff]
[    0.157760] pci_bus 0000:02: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.157764] pci_bus 0000:02: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.157768] pci_bus 0000:02: resource 13 [mem 0x000dc000-0x000dffff]
[    0.157772] pci_bus 0000:02: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.157776] pci_bus 0000:02: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.157780] pci_bus 0000:02: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.157784] pci_bus 0000:02: resource 17 [mem 0x000ec000-0x000effff]
[    0.157788] pci_bus 0000:02: resource 18 [mem 0x000f0000-0x000fffff]
[    0.157792] pci_bus 0000:02: resource 19 [mem 0xfed40000-0xfed44fff]
[    0.157796] pci_bus 0000:02: resource 20 [mem 0x80000000-0xfebfffff]
[    0.157800] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.157803] pci_bus 0000:04: resource 1 [mem 0xf2000000-0xf3ffffff]
[    0.157807] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.157812] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf60fffff]
[    0.157884] NET: Registered protocol family 2
[    0.157953] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.158529] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.160737] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.161331] TCP: Hash tables configured (established 262144 bind 65536)
[    0.161335] TCP reno registered
[    0.161341] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.161372] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.161529] NET: Registered protocol family 1
[    0.161699] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.161752] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.161810] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.161874] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.161941] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.162031] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.162039] pci 0000:00:12.0: Boot video device
[    0.162064] PCI: CLS 64 bytes, default 64
[    0.162119] Trying to unpack rootfs image as initramfs...
[    0.435745] Freeing initrd memory: 11328k freed
[    0.443548] Simple Boot Flag at 0x36 set to 0x1
[    0.445055] audit: initializing netlink socket (disabled)
[    0.445071] type=2000 audit(1300303622.444:1): initialized
[    0.445480] VFS: Disk quotas dquot_6.5.2
[    0.445517] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.445790] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.445865] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.449363] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.449727] SGI XFS Quota Management subsystem
[    0.449737] msgmni has been set to 3880
[    0.450146] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.450151] io scheduler noop registered
[    0.450153] io scheduler deadline registered (default)
[    0.451031] Linux agpgart interface v0.103
[    0.451612] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000b80000, using 3072k, total 65536k
[    0.451617] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[    0.451620] vesafb: scrolling: redraw
[    0.451624] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.460520] Console: switching to colour frame buffer device 128x48
[    0.534974] fbcondecor: console 0 using theme 'livecd-10'
[    0.587426] fbcondecor: switched decor state to 'on' on console 0
[    0.588250] fb0: VESA VGA frame buffer device
[    0.588643] [drm] Initialized drm 1.1.0 20060810
[    0.588718] [drm] radeon defaulting to kernel modesetting.
[    0.588721] [drm] radeon kernel modesetting enabled.
[    0.588854] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.643238] brd: module loaded
[    0.644709] loop: module loaded
[    0.644946] I2O subsystem v1.325
[    0.644948] i2o: max drivers = 8
[    0.648157] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    0.670911] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.670919] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.671163] mice: PS/2 mouse device common for all mice
[    0.672424] cpuidle: using governor ladder
[    0.672427] cpuidle: using governor menu
[    0.672652] TCP cubic registered
[    0.672656] NET: Registered protocol family 17
[    0.672901] registered taskstats version 1
[    0.673288] Freeing unused kernel memory: 456k freed
[    0.691360] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.219873] libata version 3.00 loaded.
[    1.639438] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0
[    1.717452] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[    1.786556] pata_amd 0000:00:06.0: version 0.4.1
[    1.786618] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.788018] scsi0 : pata_amd
[    1.788447] scsi1 : pata_amd
[    1.788947] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[    1.788952] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[    1.943348] ata1.00: ATAPI: MATSHITADVD-RAM UJ-861H, 1.50, max MWDMA2
[    1.943359] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc700) ACPI=0x39f (120:600:0x12)
[    1.949268] ata1.00: configured for MWDMA2
[    1.951528] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-861H  1.50 PQ: 0 ANSI: 5
[    1.953203] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.953207] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.953448] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.953782] ata2: port disabled. ignoring.
[    2.869937] ahci 0000:00:09.0: version 3.0
[    2.870231] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
[    2.870248] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
[    2.870280] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ
[    2.870284] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[    2.870359] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    2.870365] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio slum part 
[    2.870370] ahci 0000:00:09.0: setting latency timer to 64
[    2.872943] scsi2 : ahci
[    2.873221] scsi3 : ahci
[    2.873544] scsi4 : ahci
[    2.873851] scsi5 : ahci
[    2.874261] ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
[    2.874267] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
[    2.874271] ata5: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 23
[    2.874275] ata6: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 23
[    3.179036] ata6: SATA link down (SStatus 0 SControl 300)
[    3.179059] ata5: SATA link down (SStatus 0 SControl 300)
[    3.597038] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.597054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.601316] ata3.00: ATA-8: SAMSUNG HM160HI, HH100-08, max UDMA7
[    3.601321] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.602913] ata4.00: ATA-8: SAMSUNG HM251HI, 2AJ10001, max UDMA/133
[    3.602918] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.607320] ata3.00: configured for UDMA/133
[    3.607475] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HM160HI  HH10 PQ: 0 ANSI: 5
[    3.607952] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    3.607999] sd 2:0:0:0: [sda] Write Protect is off
[    3.608017] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.608039] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.608589] ata4.00: configured for UDMA/133
[    3.608666] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HM251HI  2AJ1 PQ: 0 ANSI: 5
[    3.609168] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    3.609217] sd 3:0:0:0: [sdb] Write Protect is off
[    3.609221] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.609242] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.639309]  sda: sda1 sda2
[    3.639855] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.993095]  sdb: sdb1 sdb2 sdb3
[    3.993900] sd 3:0:0:0: [sdb] Attached SCSI disk
[    4.247216] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    4.247484] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    4.247593] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    4.568412] scsi: <fdomain> Detection failed (no card)
[    4.614077] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    4.985774] Fusion MPT base driver 3.04.17
[    4.985778] Copyright (c) 1999-2008 LSI Corporation
[    5.091945] Fusion MPT SPI Host driver 3.04.17
[    5.179292] Fusion MPT FC Host driver 3.04.17
[    5.253934] Fusion MPT SAS Host driver 3.04.17
[    5.301225] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    5.349899] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    5.398515] Compaq SMART2 Driver (v 2.6.0)
[    5.450716] HP CISS Driver (v 3.6.26)
[    5.600889] Adaptec aacraid driver 1.1-5[26400]-ms
[    5.713418] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    5.716407] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    5.823322] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010
[    5.886690] QLogic Fibre Channel HBA Driver: 8.03.05-k0
[    5.951318] Emulex LightPulse Fibre Channel SCSI driver 8.3.18
[    5.951323] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    6.092831] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    6.149636] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.149949] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[    6.149966] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
[    6.149989] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    6.149994] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    6.150015] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    6.153058] ehci_hcd 0000:00:02.1: debug port 1
[    6.153068] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    6.153095] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000
[    6.159039] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    6.159339] hub 1-0:1.0: USB hub found
[    6.159349] hub 1-0:1.0: 7 ports detected
[    6.159636] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22
[    6.159641] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22
[    6.159663] ehci_hcd 0000:00:04.1: setting latency timer to 64
[    6.159667] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    6.159674] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[    6.162058] ehci_hcd 0000:00:04.1: debug port 1
[    6.162067] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[    6.162077] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400
[    6.168035] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    6.168313] hub 2-0:1.0: USB hub found
[    6.168321] hub 2-0:1.0: 2 ports detected
[    6.235847] Initializing USB Mass Storage driver...
[    6.235969] usbcore: registered new interface driver usb-storage
[    6.235972] USB Mass Storage support registered.
[    6.291111] uhci_hcd: USB Universal Host Controller Interface driver
[    6.389542] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[    6.389561] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19
[    6.389573] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[    6.397066] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243)
[    6.397075] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243)
[    6.397082] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243)
[    6.397090] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243)
[    6.414237] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[    6.420020] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.420313] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
[    6.420330] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18
[    6.420363] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    6.420368] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    6.420377] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[    6.423055] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000
[    6.462039] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    6.476321] hub 3-0:1.0: USB hub found
[    6.476329] hub 3-0:1.0: 7 ports detected
[    6.476620] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18
[    6.476626] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z018] -> GSI 18 (level, low) -> IRQ 18
[    6.476646] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    6.476650] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    6.476658] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[    6.479042] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000
[    6.532296] hub 4-0:1.0: USB hub found
[    6.532303] hub 4-0:1.0: 2 ports detected
[    6.577973] hub 1-1:1.0: USB hub found
[    6.578246] hub 1-1:1.0: 4 ports detected
[    6.592408] usbcore: registered new interface driver usbhid
[    6.592412] usbhid: USB HID core driver
[    6.648469] sl811: driver sl811-hcd, 19 May 2005
[    6.682046] usb 1-4: new high speed USB device using ehci_hcd and address 3
[    6.799273] scsi6 : usb-storage 1-4:1.0
[    6.902044] usb 2-2: new high speed USB device using ehci_hcd and address 2
[    7.102385] usb 1-1.3: new low speed USB device using ehci_hcd and address 4
[    7.209130] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input2
[    7.209769] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.1-1.3/input0
[    7.283386] usb 1-1.4: new full speed USB device using ehci_hcd and address 5
[    7.375107] input: USB Audio as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.4/1-1.4:1.3/input/input3
[    7.375779] generic-usb 0003:0CCD:0028.0002: input,hidraw1: USB HID v1.00 Device [USB Audio] on usb-0000:00:02.1-1.4/input3
[    7.466802] device-mapper: uevent: version 1.0.3
[    7.467126] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: [e-mail]
[    7.802409] scsi 6:0:0:0: Direct-Access     Seagate  Portable         0130 PQ: 0 ANSI: 4
[    7.804144] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    7.804284] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    7.805270] sd 6:0:0:0: [sdc] Write Protect is off
[    7.805275] sd 6:0:0:0: [sdc] Mode Sense: 2f 08 00 00
[    7.805279] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    7.807261] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    7.807786]  sdc: sdc1 sdc2
[    7.810263] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    7.810270] sd 6:0:0:0: [sdc] Attached SCSI disk
[    7.984347] md: raid0 personality registered for level 0
[    8.048620] md: raid1 personality registered for level 1
[    8.161048] raid6: int64x1   1718 MB/s
[    8.178043] raid6: int64x2   1785 MB/s
[    8.195053] raid6: int64x4   1367 MB/s
[    8.212020] raid6: int64x8   1050 MB/s
[    8.229027] raid6: sse2x1    2675 MB/s
[    8.246025] raid6: sse2x2    3347 MB/s
[    8.263022] raid6: sse2x4    3644 MB/s
[    8.263025] raid6: using algorithm sse2x4 (3644 MB/s)
[    8.287926] async_tx: api initialized (async)
[    8.299883] xor: automatically using best checksumming function: generic_sse
[    8.304013]    generic_sse:  5820.000 MB/sec
[    8.304017] xor: using function: generic_sse (5820.000 MB/sec)
[    8.353356] md: raid6 personality registered for level 6
[    8.353361] md: raid5 personality registered for level 5
[    8.353365] md: raid4 personality registered for level 4
[    8.427199] md: raid10 personality registered for level 10
[    8.560279] RPC: Registered udp transport module.
[    8.560284] RPC: Registered tcp transport module.
[    8.560287] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.655946] fuse init (API version 7.15)
[    8.728164] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    8.728169] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    8.897556] Loading iSCSI transport class v2.0-870.
[    9.080552] iscsi: registered transport (tcp)
[   19.245859] fbcondecor: console 0 using theme 'livecd-10'
[   19.264690] fbcondecor: switched decor state to 'on' on console 0
[   21.896719] ISO 9660 Extensions: Microsoft Joliet Level 3
[   21.898797] ISO 9660 Extensions: RRIP_1991A
[   21.922284] aufs 2.1-standalone.tree-37-20110117
[   22.506756] aufs test_add:261:mount[15361]: uid/gid/perm /mnt/static 0/0/0755, 0/0/01777
[   37.863394] udev[15866]: starting version 164
[   42.119926] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[   42.119988] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[   42.277376] ACPI: Battery Slot [BAT0] (battery present)
[   42.277522] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[   42.277577] ACPI: Sleep Button [SLPB]
[   42.277662] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[   42.278850] ACPI: Lid Switch [LID]
[   42.278997] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[   42.279072] ACPI: Power Button [PWRB]
[   42.279151] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[   42.279187] ACPI: Power Button [PWRF]
[   42.597426] ACPI: AC Adapter [ACAD] (on-line)
[   43.523757] sdhci: Secure Digital Host Controller Interface driver
[   43.523762] sdhci: Copyright(c) Pierre Ossman
[   43.635982] wmi: Mapper loaded
[   43.780249] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[   43.781176] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[   43.781195] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[   43.781203] forcedeth 0000:00:0a.0: setting latency timer to 64
[   44.258925] acpi device:24: registered as cooling_device0
[   44.259116] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   44.259175] ACPI: Video Device [UVGA] (multi-head: yes  rom: no  post: no)
[   44.296602] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:e0:d3:05
[   44.296609] forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3
[   44.487597] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   44.609803] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   44.612458] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   45.115966] rtc_cmos 00:07: RTC can wake from S4
[   45.119122] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[   45.119168] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[   45.436428] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   45.662060] sdhci-pci 0000:02:05.1: SDHCI controller found [1180:0822] (rev 22)
[   45.662314] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
[   45.662330] sdhci-pci 0000:02:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7
[   45.663386] sdhci-pci 0000:02:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   45.663491] [Firmware Bug]: Invalid critical threshold (0)
[   45.664200] thermal LNXTHERM:00: registered as thermal_zone0
[   45.664204] ACPI: Thermal Zone [THRM] (61 C)
[   45.664459] Registered led device: mmc0::
[   45.665511] mmc0: SDHCI controller on PCI [0000:02:05.1] using DMA
[   45.665524] sdhci-pci 0000:02:05.2: SDHCI controller found [1180:0843] (rev 12)
[   45.665534] sdhci-pci 0000:02:05.2: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7
[   45.665594] Registered led device: mmc1::
[   45.665626] mmc1: SDHCI controller on PCI [0000:02:05.2] using DMA
[   45.676268] ACPI: acpi_idle registered with cpuidle
[   45.676991] ACPI: processor limited to max C-state 1
[   45.752980] usbcore: registered new interface driver snd-usb-audio
[   45.955459] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[   45.955478] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[   45.955483] hda_intel: Disable MSI for Nvidia chipset
[   45.955547] HDA Intel 0000:00:07.0: setting latency timer to 64
[   46.868173] input: HP WMI hotkeys as /devices/virtual/input/input10
[   46.884122] cfg80211: Calling CRDA to update world regulatory domain
[   47.360132] Linux video capture interface: v2.00
[   47.384605] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16
[   47.384625] nouveau 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16
[   47.384631] nouveau 0000:00:12.0: setting latency timer to 64
[   47.389094] [drm] nouveau 0000:00:12.0: Detected an NV40 generation card (0x067000a1)
[   47.389101] checking generic (d0000000 4000000) vs hw (d0000000 10000000)
[   47.389105] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[   47.389155] Console: switching to colour dummy device 80x25
[   47.391527] [drm] nouveau 0000:00:12.0: Attempting to load BIOS image from PRAMIN
[   47.435314] [drm] nouveau 0000:00:12.0: ... appears to be valid
[   47.435320] [drm] nouveau 0000:00:12.0: BIT BIOS found
[   47.435325] [drm] nouveau 0000:00:12.0: Bios version 05.67.32.16
[   47.435330] [drm] nouveau 0000:00:12.0: TMDS table version 1.1
[   47.435333] [drm] nouveau 0000:00:12.0: TMDS table script pointers not stubbed
[   47.435337] [drm] nouveau 0000:00:12.0: BIT table 'd' not found
[   47.435341] [drm] nouveau 0000:00:12.0: Found Display Configuration Block version 3.0
[   47.435346] [drm] nouveau 0000:00:12.0: Raw DCB entry 0: 03015323 00000004
[   47.435351] [drm] nouveau 0000:00:12.0: Raw DCB entry 1: 01000310 00000023
[   47.435355] [drm] nouveau 0000:00:12.0: Raw DCB entry 2: 020223f1 0040c080
[   47.435360] [drm] nouveau 0000:00:12.0: DCB connector table: VHER 0x30 5 10 2
[   47.435364] [drm] nouveau 0000:00:12.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
[   47.435369] [drm] nouveau 0000:00:12.0:   1: 0x00001161: type 0x61 idx 1 tag 0x07
[   47.435373] [drm] nouveau 0000:00:12.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
[   47.435377] [drm] nouveau 0000:00:12.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
[   47.435382] [drm] nouveau 0000:00:12.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
[   47.435386] [drm] nouveau 0000:00:12.0:   5: 0x00000340: type 0x40 idx 5 tag 0xff
[   47.435394] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 0 at offset 0xE333
[   47.435418] [drm] nouveau 0000:00:12.0: ======= misaligned reg 0x001020FB =======
[   47.435425] [drm] nouveau 0000:00:12.0: ======= misaligned reg 0x001020FB =======
[   47.435461] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 1 at offset 0xE484
[   47.435465] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 2 at offset 0xE485
[   47.435484] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 3 at offset 0xE607
[   47.435495] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 4 at offset 0xE687
[   47.454380] [drm] nouveau 0000:00:12.0: 3 available performance level(s)
[   47.454386] [drm] nouveau 0000:00:12.0: 0: memory 0MHz core 100MHz voltage 1100mV fanspeed 100%
[   47.454392] [drm] nouveau 0000:00:12.0: 1: memory 0MHz core 250MHz voltage 1200mV fanspeed 100%
[   47.454399] [drm] nouveau 0000:00:12.0: 2: memory 0MHz core 425MHz voltage 1200mV fanspeed 100%
[   47.454408] [drm] nouveau 0000:00:12.0: c: memory 0MHz
[   47.454452] [drm] nouveau 0000:00:12.0: Detected 64MiB VRAM
[   47.454492] [TTM] Zone  kernel: Available graphics memory: 993546 kiB.
[   47.454496] [TTM] Initializing pool allocator.
[   47.455679] [drm] nouveau 0000:00:12.0: 64 MiB GART (aperture)
[   47.456968] [drm] nouveau 0000:00:12.0: Allocating FIFO number 0
[   47.457207] [drm] nouveau 0000:00:12.0: nouveau_channel_alloc: initialised FIFO 0
[   47.457215] [drm] nouveau 0000:00:12.0: ACPI backlight interface available, not registering our own
[   47.457223] [drm] nouveau 0000:00:12.0: Setting dpms mode 3 on lvds encoder (output 0)
[   47.457228] [drm] nouveau 0000:00:12.0: Calling LVDS script 6:
[   47.457233] [drm] nouveau 0000:00:12.0: 0xD680: Parsing digital output script table
[   47.457242] [drm] nouveau 0000:00:12.0: Setting dpms mode 3 on vga encoder (output 1)
[   47.457247] [drm] nouveau 0000:00:12.0: Setting dpms mode 3 on TV encoder (output 2)
[   47.701744] [drm] nouveau 0000:00:12.0: allocated 1440x900 fb: 0x49000, bo ffff8800785e6800
[   47.712401] [drm] nouveau 0000:00:12.0: Calling LVDS script 2:
[   47.712405] [drm] nouveau 0000:00:12.0: 0xD6ED: Parsing digital output script table
[   47.868030] [drm] nouveau 0000:00:12.0: Setting dpms mode 0 on lvds encoder (output 0)
[   47.868036] [drm] nouveau 0000:00:12.0: Calling LVDS script 5:
[   47.868040] [drm] nouveau 0000:00:12.0: 0xD676: Parsing digital output script table
[   47.868048] [drm] nouveau 0000:00:12.0: Output LVDS-1 is running on CRTC 0 using output A
[   47.878433] [drm] nouveau 0000:00:12.0: Setting dpms mode 0 on vga encoder (output 1)
[   47.878438] [drm] nouveau 0000:00:12.0: Output VGA-1 is running on CRTC 1 using output A
[   47.878448] Console: switching to colour frame buffer device 180x56
[   47.879969] fb0: nouveaufb frame buffer device
[   47.879972] drm: registered panic notifier
[   47.879985] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:12.0 on minor 0
[   48.062942] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a101)
[   48.065519] input: HP Webcam as /devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/input/input11
[   48.065607] usbcore: registered new interface driver uvcvideo
[   48.065610] USB Video Class driver (v1.0.0)
[   49.499650] b43-phy0: Broadcom 4311 WLAN found (core revision 13)
[   50.533666] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   50.533913] Registered led device: b43-phy0::tx
[   50.533945] Registered led device: b43-phy0::rx
[   50.533979] Registered led device: b43-phy0::radio
[   50.534017] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[   64.875018] CE: hpet increased min_delta_ns to 11520 nsec
[   66.765658] warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
[   67.447381] usbcore: registered new interface driver usbserial
[   67.447403] USB Serial support registered for generic
[   67.447456] usbcore: registered new interface driver usbserial_generic
[   67.447459] usbserial: USB Serial Driver core
[   67.531110] USB Serial support registered for GSM modem (1-port)
[   67.531226] usbcore: registered new interface driver option
[   67.531229] option: v0.7.2:USB Driver for GSM modems
[   78.996507] NET: Registered protocol family 10
[   78.996758] lo: Disabled Privacy Extensions
[   84.367673] fbcondecor: console 15 using theme 'livecd-10'
[   84.505634] fbcondecor: switched decor state to 'on' on console 15
[   96.617324] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[   96.617330] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[   96.617334] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[  102.919548] forcedeth 0000:00:0a.0: irq 40 for MSI/MSI-X
[  102.919755] eth0: no link during initialization.
[  102.920653] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  104.940284] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[  104.940290] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[  104.940294] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[  107.216200] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[  107.216206] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[  107.216210] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[  112.219611] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[  112.219616] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[  112.219620] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[  117.220253] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[  117.220259] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[  117.220263] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[  322.220259] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[  322.220265] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[  322.220269] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.