0: setting latency timer to 64 [ 0.157668] pci 0000:00:0d.0: setting latency timer to 64 [ 0.157672] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.157675] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.157678] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.157682] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.157685] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.157688] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.157691] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff] [ 0.157694] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.157698] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.157701] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] [ 0.157704] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.157708] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.157711] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.157714] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] [ 0.157717] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff] [ 0.157721] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff] [ 0.157725] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff] [ 0.157730] pci_bus 0000:02: resource 1 [mem 0xf6100000-0xf61fffff] [ 0.157734] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.157737] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.157741] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.157745] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.157749] pci_bus 0000:02: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.157753] pci_bus 0000:02: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.157757] pci_bus 0000:02: resource 10 [mem 0x000cc000-0x000cffff] [ 0.157760] pci_bus 0000:02: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.157764] pci_bus 0000:02: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.157768] pci_bus 0000:02: resource 13 [mem 0x000dc000-0x000dffff] [ 0.157772] pci_bus 0000:02: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.157776] pci_bus 0000:02: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.157780] pci_bus 0000:02: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.157784] pci_bus 0000:02: resource 17 [mem 0x000ec000-0x000effff] [ 0.157788] pci_bus 0000:02: resource 18 [mem 0x000f0000-0x000fffff] [ 0.157792] pci_bus 0000:02: resource 19 [mem 0xfed40000-0xfed44fff] [ 0.157796] pci_bus 0000:02: resource 20 [mem 0x80000000-0xfebfffff] [ 0.157800] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 0.157803] pci_bus 0000:04: resource 1 [mem 0xf2000000-0xf3ffffff] [ 0.157807] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.157812] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf60fffff] [ 0.157884] NET: Registered protocol family 2 [ 0.157953] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.158529] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.160737] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.161331] TCP: Hash tables configured (established 262144 bind 65536) [ 0.161335] TCP reno registered [ 0.161341] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.161372] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.161529] NET: Registered protocol family 1 [ 0.161699] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.161752] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.161810] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.161874] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.161941] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.162031] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.162039] pci 0000:00:12.0: Boot video device [ 0.162064] PCI: CLS 64 bytes, default 64 [ 0.162119] Trying to unpack rootfs image as initramfs... [ 0.435745] Freeing initrd memory: 11328k freed [ 0.443548] Simple Boot Flag at 0x36 set to 0x1 [ 0.445055] audit: initializing netlink socket (disabled) [ 0.445071] type=2000 audit(1300303622.444:1): initialized [ 0.445480] VFS: Disk quotas dquot_6.5.2 [ 0.445517] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.445790] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.445865] JFS: nTxBlock = 8192, nTxLock = 65536 [ 0.449363] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 0.449727] SGI XFS Quota Management subsystem [ 0.449737] msgmni has been set to 3880 [ 0.450146] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.450151] io scheduler noop registered [ 0.450153] io scheduler deadline registered (default) [ 0.451031] Linux agpgart interface v0.103 [ 0.451612] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000b80000, using 3072k, total 65536k [ 0.451617] vesafb: mode is 1024x768x16, linelength=2048, pages=1 [ 0.451620] vesafb: scrolling: redraw [ 0.451624] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.460520] Console: switching to colour frame buffer device 128x48 [ 0.534974] fbcondecor: console 0 using theme 'livecd-10' [ 0.587426] fbcondecor: switched decor state to 'on' on console 0 [ 0.588250] fb0: VESA VGA frame buffer device [ 0.588643] [drm] Initialized drm 1.1.0 20060810 [ 0.588718] [drm] radeon defaulting to kernel modesetting. [ 0.588721] [drm] radeon kernel modesetting enabled. [ 0.588854] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.643238] brd: module loaded [ 0.644709] loop: module loaded [ 0.644946] I2O subsystem v1.325 [ 0.644948] i2o: max drivers = 8 [ 0.648157] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.670911] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.670919] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.671163] mice: PS/2 mouse device common for all mice [ 0.672424] cpuidle: using governor ladder [ 0.672427] cpuidle: using governor menu [ 0.672652] TCP cubic registered [ 0.672656] NET: Registered protocol family 17 [ 0.672901] registered taskstats version 1 [ 0.673288] Freeing unused kernel memory: 456k freed [ 0.691360] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.219873] libata version 3.00 loaded. [ 1.639438] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0 [ 1.717452] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1 [ 1.786556] pata_amd 0000:00:06.0: version 0.4.1 [ 1.786618] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.788018] scsi0 : pata_amd [ 1.788447] scsi1 : pata_amd [ 1.788947] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 1.788952] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 1.943348] ata1.00: ATAPI: MATSHITADVD-RAM UJ-861H, 1.50, max MWDMA2 [ 1.943359] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc700) ACPI=0x39f (120:600:0x12) [ 1.949268] ata1.00: configured for MWDMA2 [ 1.951528] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-861H 1.50 PQ: 0 ANSI: 5 [ 1.953203] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.953207] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.953448] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.953782] ata2: port disabled. ignoring. [ 2.869937] ahci 0000:00:09.0: version 3.0 [ 2.870231] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 2.870248] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 2.870280] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ [ 2.870284] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP [ 2.870359] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 2.870365] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio slum part [ 2.870370] ahci 0000:00:09.0: setting latency timer to 64 [ 2.872943] scsi2 : ahci [ 2.873221] scsi3 : ahci [ 2.873544] scsi4 : ahci [ 2.873851] scsi5 : ahci [ 2.874261] ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23 [ 2.874267] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23 [ 2.874271] ata5: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 23 [ 2.874275] ata6: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 23 [ 3.179036] ata6: SATA link down (SStatus 0 SControl 300) [ 3.179059] ata5: SATA link down (SStatus 0 SControl 300) [ 3.597038] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.597054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.601316] ata3.00: ATA-8: SAMSUNG HM160HI, HH100-08, max UDMA7 [ 3.601321] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.602913] ata4.00: ATA-8: SAMSUNG HM251HI, 2AJ10001, max UDMA/133 [ 3.602918] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.607320] ata3.00: configured for UDMA/133 [ 3.607475] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HM160HI HH10 PQ: 0 ANSI: 5 [ 3.607952] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 3.607999] sd 2:0:0:0: [sda] Write Protect is off [ 3.608017] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.608039] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.608589] ata4.00: configured for UDMA/133 [ 3.608666] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HM251HI 2AJ1 PQ: 0 ANSI: 5 [ 3.609168] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.609217] sd 3:0:0:0: [sdb] Write Protect is off [ 3.609221] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.609242] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.639309] sda: sda1 sda2 [ 3.639855] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.993095] sdb: sdb1 sdb2 sdb3 [ 3.993900] sd 3:0:0:0: [sdb] Attached SCSI disk [ 4.247216] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 4.247484] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 4.247593] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 4.568412] scsi: Detection failed (no card) [ 4.614077] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 4.985774] Fusion MPT base driver 3.04.17 [ 4.985778] Copyright (c) 1999-2008 LSI Corporation [ 5.091945] Fusion MPT SPI Host driver 3.04.17 [ 5.179292] Fusion MPT FC Host driver 3.04.17 [ 5.253934] Fusion MPT SAS Host driver 3.04.17 [ 5.301225] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 5.349899] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 5.398515] Compaq SMART2 Driver (v 2.6.0) [ 5.450716] HP CISS Driver (v 3.6.26) [ 5.600889] Adaptec aacraid driver 1.1-5[26400]-ms [ 5.713418] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 5.716407] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 5.823322] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010 [ 5.886690] QLogic Fibre Channel HBA Driver: 8.03.05-k0 [ 5.951318] Emulex LightPulse Fibre Channel SCSI driver 8.3.18 [ 5.951323] Copyright(c) 2004-2009 Emulex. All rights reserved. [ 6.092831] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 6.149636] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.149949] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 6.149966] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22 [ 6.149989] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 6.149994] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 6.150015] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 6.153058] ehci_hcd 0000:00:02.1: debug port 1 [ 6.153068] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 6.153095] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000 [ 6.159039] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 6.159339] hub 1-0:1.0: USB hub found [ 6.159349] hub 1-0:1.0: 7 ports detected [ 6.159636] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22 [ 6.159641] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22 [ 6.159663] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 6.159667] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 6.159674] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 6.162058] ehci_hcd 0000:00:04.1: debug port 1 [ 6.162067] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 6.162077] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400 [ 6.168035] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 6.168313] hub 2-0:1.0: USB hub found [ 6.168321] hub 2-0:1.0: 2 ports detected [ 6.235847] Initializing USB Mass Storage driver... [ 6.235969] usbcore: registered new interface driver usb-storage [ 6.235972] USB Mass Storage support registered. [ 6.291111] uhci_hcd: USB Universal Host Controller Interface driver [ 6.389542] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 6.389561] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19 [ 6.389573] b43-pci-bridge 0000:03:00.0: setting latency timer to 64 [ 6.397066] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243) [ 6.397075] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243) [ 6.397082] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243) [ 6.397090] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243) [ 6.414237] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 6.420020] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.420313] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 6.420330] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 6.420363] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 6.420368] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 6.420377] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 6.423055] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000 [ 6.462039] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 6.476321] hub 3-0:1.0: USB hub found [ 6.476329] hub 3-0:1.0: 7 ports detected [ 6.476620] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18 [ 6.476626] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z018] -> GSI 18 (level, low) -> IRQ 18 [ 6.476646] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 6.476650] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 6.476658] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 6.479042] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000 [ 6.532296] hub 4-0:1.0: USB hub found [ 6.532303] hub 4-0:1.0: 2 ports detected [ 6.577973] hub 1-1:1.0: USB hub found [ 6.578246] hub 1-1:1.0: 4 ports detected [ 6.592408] usbcore: registered new interface driver usbhid [ 6.592412] usbhid: USB HID core driver [ 6.648469] sl811: driver sl811-hcd, 19 May 2005 [ 6.682046] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 6.799273] scsi6 : usb-storage 1-4:1.0 [ 6.902044] usb 2-2: new high speed USB device using ehci_hcd and address 2 [ 7.102385] usb 1-1.3: new low speed USB device using ehci_hcd and address 4 [ 7.209130] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input2 [ 7.209769] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.1-1.3/input0 [ 7.283386] usb 1-1.4: new full speed USB device using ehci_hcd and address 5 [ 7.375107] input: USB Audio as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.4/1-1.4:1.3/input/input3 [ 7.375779] generic-usb 0003:0CCD:0028.0002: input,hidraw1: USB HID v1.00 Device [USB Audio] on usb-0000:00:02.1-1.4/input3 [ 7.466802] device-mapper: uevent: version 1.0.3 [ 7.467126] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 7.802409] scsi 6:0:0:0: Direct-Access Seagate Portable 0130 PQ: 0 ANSI: 4 [ 7.804144] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 7.804284] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 7.805270] sd 6:0:0:0: [sdc] Write Protect is off [ 7.805275] sd 6:0:0:0: [sdc] Mode Sense: 2f 08 00 00 [ 7.805279] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 7.807261] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 7.807786] sdc: sdc1 sdc2 [ 7.810263] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 7.810270] sd 6:0:0:0: [sdc] Attached SCSI disk [ 7.984347] md: raid0 personality registered for level 0 [ 8.048620] md: raid1 personality registered for level 1 [ 8.161048] raid6: int64x1 1718 MB/s [ 8.178043] raid6: int64x2 1785 MB/s [ 8.195053] raid6: int64x4 1367 MB/s [ 8.212020] raid6: int64x8 1050 MB/s [ 8.229027] raid6: sse2x1 2675 MB/s [ 8.246025] raid6: sse2x2 3347 MB/s [ 8.263022] raid6: sse2x4 3644 MB/s [ 8.263025] raid6: using algorithm sse2x4 (3644 MB/s) [ 8.287926] async_tx: api initialized (async) [ 8.299883] xor: automatically using best checksumming function: generic_sse [ 8.304013] generic_sse: 5820.000 MB/sec [ 8.304017] xor: using function: generic_sse (5820.000 MB/sec) [ 8.353356] md: raid6 personality registered for level 6 [ 8.353361] md: raid5 personality registered for level 5 [ 8.353365] md: raid4 personality registered for level 4 [ 8.427199] md: raid10 personality registered for level 10 [ 8.560279] RPC: Registered udp transport module. [ 8.560284] RPC: Registered tcp transport module. [ 8.560287] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.655946] fuse init (API version 7.15) [ 8.728164] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 8.728169] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 8.897556] Loading iSCSI transport class v2.0-870. [ 9.080552] iscsi: registered transport (tcp) [ 19.245859] fbcondecor: console 0 using theme 'livecd-10' [ 19.264690] fbcondecor: switched decor state to 'on' on console 0 [ 21.896719] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 21.898797] ISO 9660 Extensions: RRIP_1991A [ 21.922284] aufs 2.1-standalone.tree-37-20110117 [ 22.506756] aufs test_add:261:mount[15361]: uid/gid/perm /mnt/static 0/0/0755, 0/0/01777 [ 37.863394] udev[15866]: starting version 164 [ 42.119926] i2c i2c-0: nForce2 SMBus adapter at 0x3040 [ 42.119988] i2c i2c-1: nForce2 SMBus adapter at 0x3000 [ 42.277376] ACPI: Battery Slot [BAT0] (battery present) [ 42.277522] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 42.277577] ACPI: Sleep Button [SLPB] [ 42.277662] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 [ 42.278850] ACPI: Lid Switch [LID] [ 42.278997] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6 [ 42.279072] ACPI: Power Button [PWRB] [ 42.279151] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 [ 42.279187] ACPI: Power Button [PWRF] [ 42.597426] ACPI: AC Adapter [ACAD] (on-line) [ 43.523757] sdhci: Secure Digital Host Controller Interface driver [ 43.523762] sdhci: Copyright(c) Pierre Ossman [ 43.635982] wmi: Mapper loaded [ 43.780249] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 43.781176] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 43.781195] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20 [ 43.781203] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 44.258925] acpi device:24: registered as cooling_device0 [ 44.259116] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 44.259175] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 44.296602] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:e0:d3:05 [ 44.296609] forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 44.487597] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 44.609803] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 44.612458] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 45.115966] rtc_cmos 00:07: RTC can wake from S4 [ 45.119122] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 45.119168] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 45.436428] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 45.662060] sdhci-pci 0000:02:05.1: SDHCI controller found [1180:0822] (rev 22) [ 45.662314] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 45.662330] sdhci-pci 0000:02:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 45.663386] sdhci-pci 0000:02:05.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 45.663491] [Firmware Bug]: Invalid critical threshold (0) [ 45.664200] thermal LNXTHERM:00: registered as thermal_zone0 [ 45.664204] ACPI: Thermal Zone [THRM] (61 C) [ 45.664459] Registered led device: mmc0:: [ 45.665511] mmc0: SDHCI controller on PCI [0000:02:05.1] using DMA [ 45.665524] sdhci-pci 0000:02:05.2: SDHCI controller found [1180:0843] (rev 12) [ 45.665534] sdhci-pci 0000:02:05.2: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 45.665594] Registered led device: mmc1:: [ 45.665626] mmc1: SDHCI controller on PCI [0000:02:05.2] using DMA [ 45.676268] ACPI: acpi_idle registered with cpuidle [ 45.676991] ACPI: processor limited to max C-state 1 [ 45.752980] usbcore: registered new interface driver snd-usb-audio [ 45.955459] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 45.955478] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 45.955483] hda_intel: Disable MSI for Nvidia chipset [ 45.955547] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 46.868173] input: HP WMI hotkeys as /devices/virtual/input/input10 [ 46.884122] cfg80211: Calling CRDA to update world regulatory domain [ 47.360132] Linux video capture interface: v2.00 [ 47.384605] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16 [ 47.384625] nouveau 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16 [ 47.384631] nouveau 0000:00:12.0: setting latency timer to 64 [ 47.389094] [drm] nouveau 0000:00:12.0: Detected an NV40 generation card (0x067000a1) [ 47.389101] checking generic (d0000000 4000000) vs hw (d0000000 10000000) [ 47.389105] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver [ 47.389155] Console: switching to colour dummy device 80x25 [ 47.391527] [drm] nouveau 0000:00:12.0: Attempting to load BIOS image from PRAMIN [ 47.435314] [drm] nouveau 0000:00:12.0: ... appears to be valid [ 47.435320] [drm] nouveau 0000:00:12.0: BIT BIOS found [ 47.435325] [drm] nouveau 0000:00:12.0: Bios version 05.67.32.16 [ 47.435330] [drm] nouveau 0000:00:12.0: TMDS table version 1.1 [ 47.435333] [drm] nouveau 0000:00:12.0: TMDS table script pointers not stubbed [ 47.435337] [drm] nouveau 0000:00:12.0: BIT table 'd' not found [ 47.435341] [drm] nouveau 0000:00:12.0: Found Display Configuration Block version 3.0 [ 47.435346] [drm] nouveau 0000:00:12.0: Raw DCB entry 0: 03015323 00000004 [ 47.435351] [drm] nouveau 0000:00:12.0: Raw DCB entry 1: 01000310 00000023 [ 47.435355] [drm] nouveau 0000:00:12.0: Raw DCB entry 2: 020223f1 0040c080 [ 47.435360] [drm] nouveau 0000:00:12.0: DCB connector table: VHER 0x30 5 10 2 [ 47.435364] [drm] nouveau 0000:00:12.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 47.435369] [drm] nouveau 0000:00:12.0: 1: 0x00001161: type 0x61 idx 1 tag 0x07 [ 47.435373] [drm] nouveau 0000:00:12.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 47.435377] [drm] nouveau 0000:00:12.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [ 47.435382] [drm] nouveau 0000:00:12.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [ 47.435386] [drm] nouveau 0000:00:12.0: 5: 0x00000340: type 0x40 idx 5 tag 0xff [ 47.435394] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 0 at offset 0xE333 [ 47.435418] [drm] nouveau 0000:00:12.0: ======= misaligned reg 0x001020FB ======= [ 47.435425] [drm] nouveau 0000:00:12.0: ======= misaligned reg 0x001020FB ======= [ 47.435461] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 1 at offset 0xE484 [ 47.435465] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 2 at offset 0xE485 [ 47.435484] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 3 at offset 0xE607 [ 47.435495] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 4 at offset 0xE687 [ 47.454380] [drm] nouveau 0000:00:12.0: 3 available performance level(s) [ 47.454386] [drm] nouveau 0000:00:12.0: 0: memory 0MHz core 100MHz voltage 1100mV fanspeed 100% [ 47.454392] [drm] nouveau 0000:00:12.0: 1: memory 0MHz core 250MHz voltage 1200mV fanspeed 100% [ 47.454399] [drm] nouveau 0000:00:12.0: 2: memory 0MHz core 425MHz voltage 1200mV fanspeed 100% [ 47.454408] [drm] nouveau 0000:00:12.0: c: memory 0MHz [ 47.454452] [drm] nouveau 0000:00:12.0: Detected 64MiB VRAM [ 47.454492] [TTM] Zone kernel: Available graphics memory: 993546 kiB. [ 47.454496] [TTM] Initializing pool allocator. [ 47.455679] [drm] nouveau 0000:00:12.0: 64 MiB GART (aperture) [ 47.456968] [drm] nouveau 0000:00:12.0: Allocating FIFO number 0 [ 47.457207] [drm] nouveau 0000:00:12.0: nouveau_channel_alloc: initialised FIFO 0 [ 47.457215] [drm] nouveau 0000:00:12.0: ACPI backlight interface available, not registering our own [ 47.457223] [drm] nouveau 0000:00:12.0: Setting dpms mode 3 on lvds encoder (output 0) [ 47.457228] [drm] nouveau 0000:00:12.0: Calling LVDS script 6: [ 47.457233] [drm] nouveau 0000:00:12.0: 0xD680: Parsing digital output script table [ 47.457242] [drm] nouveau 0000:00:12.0: Setting dpms mode 3 on vga encoder (output 1) [ 47.457247] [drm] nouveau 0000:00:12.0: Setting dpms mode 3 on TV encoder (output 2) [ 47.701744] [drm] nouveau 0000:00:12.0: allocated 1440x900 fb: 0x49000, bo ffff8800785e6800 [ 47.712401] [drm] nouveau 0000:00:12.0: Calling LVDS script 2: [ 47.712405] [drm] nouveau 0000:00:12.0: 0xD6ED: Parsing digital output script table [ 47.868030] [drm] nouveau 0000:00:12.0: Setting dpms mode 0 on lvds encoder (output 0) [ 47.868036] [drm] nouveau 0000:00:12.0: Calling LVDS script 5: [ 47.868040] [drm] nouveau 0000:00:12.0: 0xD676: Parsing digital output script table [ 47.868048] [drm] nouveau 0000:00:12.0: Output LVDS-1 is running on CRTC 0 using output A [ 47.878433] [drm] nouveau 0000:00:12.0: Setting dpms mode 0 on vga encoder (output 1) [ 47.878438] [drm] nouveau 0000:00:12.0: Output VGA-1 is running on CRTC 1 using output A [ 47.878448] Console: switching to colour frame buffer device 180x56 [ 47.879969] fb0: nouveaufb frame buffer device [ 47.879972] drm: registered panic notifier [ 47.879985] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:12.0 on minor 0 [ 48.062942] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a101) [ 48.065519] input: HP Webcam as /devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/input/input11 [ 48.065607] usbcore: registered new interface driver uvcvideo [ 48.065610] USB Video Class driver (v1.0.0) [ 49.499650] b43-phy0: Broadcom 4311 WLAN found (core revision 13) [ 50.533666] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 50.533913] Registered led device: b43-phy0::tx [ 50.533945] Registered led device: b43-phy0::rx [ 50.533979] Registered led device: b43-phy0::radio [ 50.534017] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ] [ 64.875018] CE: hpet increased min_delta_ns to 11520 nsec [ 66.765658] warning: process `hwsetup' used the deprecated sysctl system call with 1.23. [ 67.447381] usbcore: registered new interface driver usbserial [ 67.447403] USB Serial support registered for generic [ 67.447456] usbcore: registered new interface driver usbserial_generic [ 67.447459] usbserial: USB Serial Driver core [ 67.531110] USB Serial support registered for GSM modem (1-port) [ 67.531226] usbcore: registered new interface driver option [ 67.531229] option: v0.7.2:USB Driver for GSM modems [ 78.996507] NET: Registered protocol family 10 [ 78.996758] lo: Disabled Privacy Extensions [ 84.367673] fbcondecor: console 15 using theme 'livecd-10' [ 84.505634] fbcondecor: switched decor state to 'on' on console 15 [ 96.617324] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found [ 96.617330] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found [ 96.617334] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 102.919548] forcedeth 0000:00:0a.0: irq 40 for MSI/MSI-X [ 102.919755] eth0: no link during initialization. [ 102.920653] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 104.940284] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found [ 104.940290] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found [ 104.940294] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 107.216200] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found [ 107.216206] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found [ 107.216210] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 112.219611] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found [ 112.219616] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found [ 112.219620] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 117.220253] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found [ 117.220259] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found [ 117.220263] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 322.220259] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found [ 322.220265] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found [ 322.220269] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.