DMesg file While KB Is Working but ACPI and APIC are off

kbworking.txt (text/plain), 24.72 KB, created by Kyle Jones on 2011-02-19 22:51:16 UTC

Initializing cgroup subsys cpuset
Linux version 2.6.37-gentoo (root@enigma) (gcc version 4.5.1 (Gentoo 4.5.1 p1.0, pie-0.4.5) ) #1 SMP Sat Feb 19 11:04:47 CST 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
 BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003f2c0000 (usable)
 BIOS-e820: 000000003f2c0000 - 000000003f2c2000 (reserved)
 BIOS-e820: 000000003f2c2000 - 000000003f2c9000 (ACPI NVS)
 BIOS-e820: 000000003f2c9000 - 000000003f3e8000 (usable)
 BIOS-e820: 000000003f3e8000 - 000000003f42e000 (ACPI NVS)
 BIOS-e820: 000000003f42e000 - 000000003f436000 (ACPI data)
 BIOS-e820: 000000003f436000 - 000000003f439000 (ACPI NVS)
 BIOS-e820: 000000003f439000 - 000000003f461000 (reserved)
 BIOS-e820: 000000003f461000 - 000000003f462000 (usable)
 BIOS-e820: 000000003f462000 - 000000003f46c000 (ACPI NVS)
 BIOS-e820: 000000003f46c000 - 000000003f48d000 (reserved)
 BIOS-e820: 000000003f48d000 - 000000003f600000 (usable)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.6 present.
DMI:         /4392    , BIOS 3CCN09WW 06/13/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3f600 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask 0C0000000 write-back
  1 base 03F600000 mask 0FFF00000 write-through
  2 base 03F700000 mask 0FFF00000 uncachable
  3 base 03F800000 mask 0FF800000 uncachable
  4 disabled
  5 disabled
  6 disabled
found SMP MP-table at [c00fcc60] fcc60
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ bfb000-c00000
RAMDISK: 35c83000 - 37ff0000
Allocated new RAMDISK: 33916000 - 35c82bc4
Move RAMDISK from 0000000035c83000 - 0000000037fefbc3 to 33916000 - 35c82bc3
126MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0003f600
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x0003f2c0
    0: 0x0003f2c9 -> 0x0003f3e8
    0: 0x0003f461 -> 0x0003f462
    0: 0x0003f48d -> 0x0003f600
On node 0 totalpages: 259296
free_area_init_node: node 0, pgdat c05a4140, node_mem_map f700d200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3949 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 253 pages used for memmap
  HighMem zone: 31832 pages, LIFO batch:7
Using APIC driver default
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
MPTABLE: OEM ID: CB-01
MPTABLE: Product ID: LENOVO
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
I/O APIC #4 Version 32 at 0xFEC00000.
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Processors: 1
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 3f600000 (gap: 3f600000:bf600000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f6c00000 s26048 r0 d23104 u4194304
pcpu-alloc: s26048 r0 d23104 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257267
Kernel command line: root=/dev/ram0 ramdisk=8192 real_root=/dev/sda2 noapic acpi=off video=vesafb:mtrr:3,ywrap,1024x600-32@60"
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0003f600)
Memory: 986228k/1038336k available (3164k kernel code, 50956k reserved, 1633k data, 460k init, 128340k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc05b0000 - 0xc0623000   ( 460 kB)
      .data : 0xc04170a3 - 0xc05af4c8   (1633 kB)
      .text : 0xc0100000 - 0xc04170a3   (3164 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
NR_IRQS:512
CPU 0 irqstacks, hard=f6806000 soft=f6808000
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1662.479 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.95 BogoMIPS (lpj=1662479)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys net_cls
CPU: Unsupported number of siblings 2
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
... version:                3
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
Enabling APIC mode:  Flat.  Using 1 I/O APICs
CPU0: Intel(R) Atom(TM) CPU N455   @ 1.66GHz stepping 0a
Brought up 1 CPUs
Total of 1 processors activated (3324.95 BogoMIPS).
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  5072.000 MB/sec
xor: using function: pIII_sse (5072.000 MB/sec)
NET: Registered protocol family 16
dca service started, version 1.12.1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
raid6: int32x1    187 MB/s
raid6: int32x2    238 MB/s
raid6: int32x4    300 MB/s
raid6: int32x8    312 MB/s
raid6: mmxx1      371 MB/s
raid6: mmxx2      734 MB/s
raid6: sse1x1     304 MB/s
raid6: sse1x2     535 MB/s
raid6: sse2x1     609 MB/s
raid6: sse2x2    1066 MB/s
raid6: using algorithm sse2x2 (1066 MB/s)
ACPI: Interpreter disabled.
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xfea80000-0xfeafffff]
pci 0000:00:02.0: reg 14: [io  0xf100-0xf107]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xfe700000-0xfe7fffff]
pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
pci 0000:00:02.1: reg 10: [mem 0xfea00000-0xfea7ffff]
pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0xf0a0-0xf0bf]
pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0xf080-0xf09f]
pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0xf060-0xf07f]
pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io  0xf040-0xf05f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfeb05000-0xfeb053ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io  0xf0f0-0xf0f7]
pci 0000:00:1f.2: reg 14: [io  0xf0e0-0xf0e3]
pci 0000:00:1f.2: reg 18: [io  0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 1c: [io  0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xfeb04000-0xfeb043ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io  0xf000-0xf01f]
pci 0000:01:00.0: [10ec:8136] type 0 class 0x000200
pci 0000:01:00.0: reg 10: [io  0xe000-0xe0ff]
pci 0000:01:00.0: reg 18: [mem 0xe0010000-0xe0010fff 64bit pref]
pci 0000:01:00.0: reg 20: [mem 0xe0000000-0xe000ffff 64bit pref]
pci 0000:01:00.0: reg 30: [mem 0xfe900000-0xfe91ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
pci 0000:02:00.0: [1814:3090] type 0 class 0x000280
pci 0000:02:00.0: reg 10: [mem 0xfe800000-0xfe80ffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.1:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:27bc]
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff 
reserve RAM buffer: 000000003f2c0000 - 000000003fffffff 
reserve RAM buffer: 000000003f3e8000 - 000000003fffffff 
reserve RAM buffer: 000000003f462000 - 000000003fffffff 
reserve RAM buffer: 000000003f600000 - 000000003fffffff 
Switching to clocksource tsc
pnp: PnP ACPI: disabled
pci 0000:00:1c.1: BAR 9: assigned [mem 0x40000000-0x401fffff 64bit pref]
pci 0000:00:1c.1: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.1:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:1c.1:   bridge window [mem 0x40000000-0x401fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
PCI: setting IRQ 11 as level-triggered
pci 0000:00:1c.0: found PCI INT A -> IRQ 11
pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:02.0
pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1b.0
pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1d.3
pci 0000:00:1c.0: sharing IRQ 11 with 0000:01:00.0
pci 0000:00:1c.0: setting latency timer to 64
PCI: setting IRQ 10 as level-triggered
pci 0000:00:1c.1: found PCI INT B -> IRQ 10
pci 0000:00:1c.1: sharing IRQ 10 with 0000:02:00.0
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
pci_bus 0000:03: resource 4 [io  0x0000-0xffff]
pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 36276k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1298154227.616:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 1746
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
ahci 0000:00:1f.2: version 3.0
PCI: setting IRQ 3 as level-triggered
ahci 0000:00:1f.2: found PCI INT B -> IRQ 3
ahci 0000:00:1f.2: sharing IRQ 3 with 0000:00:1d.1
ahci 0000:00:1f.2: sharing IRQ 3 with 0000:00:1f.3
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 42
ata2: SATA max UDMA/133 abar m1024@0xfeb04000 port 0xfeb04180 irq 42
ata3: DUMMY
ata4: DUMMY
Error: Driver 'pata_platform' is already registered, aborting...
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
ioatdma: Intel(R) QuickData Technology Driver 4.00
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: INTEL SSDSA2MH080G1GC, 045C8820, max UDMA/133
ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2MH08 045C PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda2
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 460k freed
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
sd 0:0:0:0: Attached scsi generic sg0 type 0
NCR53c406a: no available ports found
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
NCR53c406a: no available ports found
imm: Version 2.05 (for Linux 2.4.0)
sym53c416.c: Version 1.0.0-ac
Fusion MPT base driver 3.04.17
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.17
Fusion MPT FC Host driver 3.04.17
Fusion MPT SAS Host driver 3.04.17
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
Adaptec aacraid driver 1.1-5[26400]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010
QLogic Fibre Channel HBA Driver: 8.03.05-k0
Emulex LightPulse Fibre Channel SCSI driver 8.3.18
Copyright(c) 2004-2009 Emulex.  All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
PCI: setting IRQ 5 as level-triggered
ehci_hcd 0000:00:1d.7: found PCI INT A -> IRQ 5
ehci_hcd 0000:00:1d.7: sharing IRQ 5 with 0000:00:1d.0
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 5, io mem 0xfeb05000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usbcore: registered new interface driver libusual
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 5
uhci_hcd 0000:00:1d.0: sharing IRQ 5 with 0000:00:1d.7
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000f0a0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 3
uhci_hcd 0000:00:1d.1: sharing IRQ 3 with 0000:00:1f.3
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 3, io base 0x0000f080
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: setting IRQ 7 as level-triggered
uhci_hcd 0000:00:1d.2: found PCI INT C -> IRQ 7
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 7, io base 0x0000f060
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: found PCI INT D -> IRQ 11
uhci_hcd 0000:00:1d.3: sharing IRQ 11 with 0000:00:02.0
uhci_hcd 0000:00:1d.3: sharing IRQ 11 with 0000:00:1b.0
uhci_hcd 0000:00:1d.3: sharing IRQ 11 with 0000:01:00.0
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 11, io base 0x0000f040
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-8: new high speed USB device using ehci_hcd and address 2
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: [e-mail]
md: raid10 personality registered for level 10
JFS: nTxBlock = 7992, nTxLock = 63936
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
fuse init (API version 7.15)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
udev: starting version 151
udevd (7890): /proc/7890/oom_adj is deprecated, please use /proc/7890/oom_score_adj instead.
Linux agpgart interface v0.103
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: found PCI INT A -> IRQ 11
r8169 0000:01:00.0: sharing IRQ 11 with 0000:00:02.0
r8169 0000:01:00.0: sharing IRQ 11 with 0000:00:1b.0
r8169 0000:01:00.0: sharing IRQ 11 with 0000:00:1d.3
r8169 0000:01:00.0: setting latency timer to 64
r8169 0000:01:00.0: irq 43 for MSI/MSI-X
r8169 0000:01:00.0: eth0: RTL8102e at 0xf819c000, 00:e1:0c:38:0d:7f, XID 14c00000 IRQ 43
input: PC Speaker as /devices/platform/pcspkr/input/input2
cfg80211: Calling CRDA to update world regulatory domain
i801_smbus 0000:00:1f.3: found PCI INT B -> IRQ 3
i801_smbus 0000:00:1f.3: sharing IRQ 3 with 0000:00:1d.1
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0ac8:c42b)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input3
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
HDA Intel 0000:00:1b.0: found PCI INT A -> IRQ 11
HDA Intel 0000:00:1b.0: sharing IRQ 11 with 0000:00:02.0
HDA Intel 0000:00:1b.0: sharing IRQ 11 with 0000:00:1d.3
HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC662 rev1: BIOS auto-probing.
rt2800pci 0000:02:00.0: found PCI INT A -> IRQ 10
rt2800pci 0000:02:00.0: setting latency timer to 64
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2800pci-phy0::radio
Registered led device: rt2800pci-phy0::assoc
Registered led device: rt2800pci-phy0::quality
EXT4-fs (sda2): re-mounted. Opts: (null)
r8169 0000:01:00.0: eth0: link down
phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 94:0c:6d:ef:c1:50 (try 1)
wlan0: authenticated
wlan0: associate with 94:0c:6d:ef:c1:50 (try 1)
wlan0: RX AssocResp from 94:0c:6d:ef:c1:50 (capab=0x431 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present