Go to:
Gentoo Home
Documentation
Forums
Lists
Bugs
Planet
Store
Wiki
Get Gentoo!
Gentoo's Bugzilla – Attachment 257938 Details for
Bug 346955
Problem with USE gdu on non-utf8 systems
Home
|
New
–
[Ex]
|
Browse
|
Search
|
Privacy Policy
|
[?]
|
Reports
|
Requests
|
Help
|
New Account
|
Log In
[x]
|
Forgot Password
Login:
[x]
Dmesg output with GVFS installed and causing problems
dmesg_nogvfs (text/plain), 125.02 KB, created by
luckylinux
on 2010-12-24 12:06:01 UTC
(
hide
)
Description:
Dmesg output with GVFS installed and causing problems
Filename:
MIME Type:
Creator:
luckylinux
Created:
2010-12-24 12:06:01 UTC
Size:
125.02 KB
patch
obsolete
>[ 0.000000] Initializing cgroup subsys cpuset >[ 0.000000] Initializing cgroup subsys cpu >[ 0.000000] Linux version 2.6.37-rc4 (root@sysresccd) (gcc version 4.4.4 (Gentoo 4.4.4-r2 p1.2, pie-0.4.5) ) #1 SMP PREEMPT Sat Dec 11 15:54:12 CET 2010 >[ 0.000000] Command line: ro root=/dev/sdf3 rootfstype=ext4 >[ 0.000000] BIOS-provided physical RAM map: >[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) >[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) >[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) >[ 0.000000] BIOS-e820: 0000000000100000 - 00000000df7a0000 (usable) >[ 0.000000] BIOS-e820: 00000000df7a0000 - 00000000df7d2000 (ACPI NVS) >[ 0.000000] BIOS-e820: 00000000df7d2000 - 00000000df7e0000 (ACPI data) >[ 0.000000] BIOS-e820: 00000000df7e0000 - 00000000df800000 (reserved) >[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) >[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) >[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable) >[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! >[ 0.000000] DMI 2.4 present. >[ 0.000000] DMI: P55A-UD6(C)/P55A-UD6(C), BIOS F11 08/04/2010 >[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) >[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) >[ 0.000000] No AGP bridge found >[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000 >[ 0.000000] MTRR default type: uncachable >[ 0.000000] MTRR fixed ranges enabled: >[ 0.000000] 00000-9FFFF write-back >[ 0.000000] A0000-BFFFF uncachable >[ 0.000000] C0000-CCFFF write-protect >[ 0.000000] CD000-EFFFF uncachable >[ 0.000000] F0000-FFFFF write-through >[ 0.000000] MTRR variable ranges enabled: >[ 0.000000] 0 base 000000000 mask F00000000 write-back >[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable >[ 0.000000] 2 base 100000000 mask F00000000 write-back >[ 0.000000] 3 base 200000000 mask FE0000000 write-back >[ 0.000000] 4 disabled >[ 0.000000] 5 disabled >[ 0.000000] 6 disabled >[ 0.000000] 7 disabled >[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 >[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) >[ 0.000000] last_pfn = 0xdf7a0 max_arch_pfn = 0x400000000 >[ 0.000000] found SMP MP-table at [ffff8800000f5a60] f5a60 >[ 0.000000] Scanning 0 areas for low memory corruption >[ 0.000000] initial memory mapped : 0 - 20000000 >[ 0.000000] init_memory_mapping: 0000000000000000-00000000df7a0000 >[ 0.000000] 0000000000 - 00df600000 page 2M >[ 0.000000] 00df600000 - 00df7a0000 page 4k >[ 0.000000] kernel direct mapping tables up to df7a0000 @ 1fffa000-20000000 >[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000 >[ 0.000000] 0100000000 - 0220000000 page 2M >[ 0.000000] kernel direct mapping tables up to 220000000 @ df796000-df7a0000 >[ 0.000000] ACPI: RSDP 00000000000f7870 00014 (v00 GBT ) >[ 0.000000] ACPI: RSDT 00000000df7d2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) >[ 0.000000] ACPI: FACP 00000000df7d20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) >[ 0.000000] ACPI: DSDT 00000000df7d2180 0543D (v01 GBT GBTUACPI 00001000 MSFT 0100000C) >[ 0.000000] ACPI: FACS 00000000df7a0000 00040 >[ 0.000000] ACPI: HPET 00000000df7d7700 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) >[ 0.000000] ACPI: MCFG 00000000df7d7780 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) >[ 0.000000] ACPI: EUDS 00000000df7d7840 00560 (v01 GBT 00000000 00000000) >[ 0.000000] ACPI: TAMG 00000000df7d7da0 00A32 (v01 GBT GBT B0 5455312E BG?? 53450101) >[ 0.000000] ACPI: APIC 00000000df7d7600 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) >[ 0.000000] ACPI: SSDT 00000000df7d8800 02D2C (v01 INTEL PPM RCM 80000001 INTL 20061109) >[ 0.000000] ACPI: Local APIC address 0xfee00000 >[ 0.000000] No NUMA configuration found >[ 0.000000] Faking a node at 0000000000000000-0000000220000000 >[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000 >[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff] >[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217e00000-ffff88021effffff] on node 0 >[ 0.000000] Zone PFN ranges: >[ 0.000000] DMA 0x00000010 -> 0x00001000 >[ 0.000000] DMA32 0x00001000 -> 0x00100000 >[ 0.000000] Normal 0x00100000 -> 0x00220000 >[ 0.000000] Movable zone start PFN for each node >[ 0.000000] early_node_map[3] active PFN ranges >[ 0.000000] 0: 0x00000010 -> 0x0000009d >[ 0.000000] 0: 0x00000100 -> 0x000df7a0 >[ 0.000000] 0: 0x00100000 -> 0x00220000 >[ 0.000000] On node 0 totalpages: 2094893 >[ 0.000000] DMA zone: 56 pages used for memmap >[ 0.000000] DMA zone: 6 pages reserved >[ 0.000000] DMA zone: 3919 pages, LIFO batch:0 >[ 0.000000] DMA32 zone: 14280 pages used for memmap >[ 0.000000] DMA32 zone: 896984 pages, LIFO batch:31 >[ 0.000000] Normal zone: 16128 pages used for memmap >[ 0.000000] Normal zone: 1163520 pages, LIFO batch:31 >[ 0.000000] ACPI: PM-Timer IO Port: 0x408 >[ 0.000000] ACPI: Local APIC address 0xfee00000 >[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) >[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) >[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) >[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) >[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) >[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) >[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) >[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) >[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) >[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) >[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) >[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) >[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) >[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) >[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) >[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 >[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >[ 0.000000] ACPI: IRQ0 used by override. >[ 0.000000] ACPI: IRQ2 used by override. >[ 0.000000] ACPI: IRQ9 used by override. >[ 0.000000] Using ACPI (MADT) for SMP configuration information >[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 >[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs >[ 0.000000] nr_irqs_gsi: 40 >[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 >[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 >[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 >[ 0.000000] PM: Registered nosave memory: 00000000df7a0000 - 00000000df7d2000 >[ 0.000000] PM: Registered nosave memory: 00000000df7d2000 - 00000000df7e0000 >[ 0.000000] PM: Registered nosave memory: 00000000df7e0000 - 00000000df800000 >[ 0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000f0000000 >[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 >[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 >[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 >[ 0.000000] Allocating PCI resources starting at df800000 (gap: df800000:10800000) >[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 >[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800df400000 s78272 r8192 d24128 u262144 >[ 0.000000] pcpu-alloc: s78272 r8192 d24128 u262144 alloc=1*2097152 >[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 >[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064423 >[ 0.000000] Policy zone: Normal >[ 0.000000] Kernel command line: ro root=/dev/sdf3 rootfstype=ext4 >[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) >[ 0.000000] Checking aperture... >[ 0.000000] No AGP bridge found >[ 0.000000] Memory: 8178368k/8912896k available (9541k kernel code, 533324k absent, 201204k reserved, 5903k data, 632k init) >[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 >[ 0.000000] Preemptable hierarchical RCU implementation. >[ 0.000000] RCU-based detection of stalled CPUs is disabled. >[ 0.000000] Verbose stalled-CPUs detection is disabled. >[ 0.000000] NR_IRQS:4352 nr_irqs:744 16 >[ 0.000000] Console: colour VGA+ 80x25 >[ 0.000000] console [tty0] enabled >[ 0.000000] hpet clockevent registered >[ 0.000000] Fast TSC calibration using PIT >[ 0.001000] Detected 3006.658 MHz processor. >[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6013.31 BogoMIPS (lpj=3006658) >[ 0.000419] pid_max: default: 32768 minimum: 301 >[ 0.000627] Security Framework initialized >[ 0.000823] SELinux: Initializing. >[ 0.001017] SELinux: Starting in permissive mode >[ 0.001018] AppArmor: AppArmor disabled by boot time parameter >[ 0.001709] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) >[ 0.003425] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) >[ 0.004313] Mount-cache hash table entries: 256 >[ 0.004589] Initializing cgroup subsys ns >[ 0.004785] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. >[ 0.005137] Initializing cgroup subsys cpuacct >[ 0.005344] Initializing cgroup subsys freezer >[ 0.005541] Initializing cgroup subsys blkio >[ 0.005754] CPU: Physical Processor ID: 0 >[ 0.005948] CPU: Processor Core ID: 0 >[ 0.006141] mce: CPU supports 9 MCE banks >[ 0.006348] CPU0: Thermal monitoring enabled (TM1) >[ 0.006552] using mwait in idle threads. >[ 0.006745] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver. >[ 0.007092] ... version: 3 >[ 0.007293] ... bit width: 48 >[ 0.007487] ... generic registers: 4 >[ 0.007680] ... value mask: 0000ffffffffffff >[ 0.007884] ... max period: 000000007fffffff >[ 0.008087] ... fixed-purpose events: 3 >[ 0.008288] ... event mask: 000000070000000f >[ 0.008543] ACPI: Core revision 20101013 >[ 0.016410] Setting APIC routing to flat >[ 0.016926] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >[ 0.027119] CPU0: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz stepping 05 >[ 0.135018] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. >[ 0.782971] Brought up 8 CPUs >[ 0.783160] Total of 8 processors activated (48108.50 BogoMIPS). >[ 0.785878] kworker/u:0 used greatest stack depth: 5792 bytes left >[ 0.786141] xor: automatically using best checksumming function: generic_sse >[ 0.790923] generic_sse: 11296.000 MB/sec >[ 0.791120] xor: using function: generic_sse (11296.000 MB/sec) >[ 0.791348] Time: 10:00:22 Date: 12/24/10 >[ 0.791565] NET: Registered protocol family 16 >[ 0.791991] ACPI: bus type pci registered >[ 0.792255] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) >[ 0.792612] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 >[ 0.799187] PCI: Using configuration type 1 for base access >[ 0.804974] bio: create slab <bio-0> at 0 >[ 0.821889] raid6: int64x1 2660 MB/s >[ 0.838846] raid6: int64x2 3277 MB/s >[ 0.855831] raid6: int64x4 2554 MB/s >[ 0.872809] raid6: int64x8 2542 MB/s >[ 0.889766] raid6: sse2x1 8078 MB/s >[ 0.906735] raid6: sse2x2 9449 MB/s >[ 0.923708] raid6: sse2x4 10359 MB/s >[ 0.923900] raid6: using algorithm sse2x4 (10359 MB/s) >[ 0.924898] ACPI: EC: Look up EC in DSDT >[ 0.929010] ACPI Warning: Incorrect checksum in table [TAMG] - 0x10, should be 0x0F (20101013/tbutils-314) >[ 0.930535] ACPI: Interpreter enabled >[ 0.930730] ACPI: (supports S0 S3 S4 S5) >[ 0.931105] ACPI: Using IOAPIC for interrupt routing >[ 0.935761] ACPI: No dock devices found. >[ 0.935957] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug >[ 0.936365] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) >[ 0.936703] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] >[ 0.936918] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] >[ 0.937133] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] >[ 0.937473] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] >[ 0.937816] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff] >[ 0.940441] pci_root PNP0A03:00: host bridge window [mem 0xdf7f0000-0xfebfffff] >[ 0.940792] pci 0000:00:00.0: [8086:d131] type 0 class 0x000600 >[ 0.940832] pci 0000:00:03.0: [8086:d138] type 1 class 0x000604 >[ 0.940865] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold >[ 0.940868] pci 0000:00:03.0: PME# disabled >[ 0.940881] pci 0000:00:05.0: [8086:d13a] type 1 class 0x000604 >[ 0.940914] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold >[ 0.940916] pci 0000:00:05.0: PME# disabled >[ 0.940929] pci 0000:00:08.0: [8086:d155] type 0 class 0x000880 >[ 0.940971] pci 0000:00:08.1: [8086:d156] type 0 class 0x000880 >[ 0.941013] pci 0000:00:08.2: [8086:d157] type 0 class 0x000880 >[ 0.941055] pci 0000:00:08.3: [8086:d158] type 0 class 0x000880 >[ 0.941096] pci 0000:00:10.0: [8086:d150] type 0 class 0x000880 >[ 0.941131] pci 0000:00:10.1: [8086:d151] type 0 class 0x000880 >[ 0.941181] pci 0000:00:1a.0: [8086:3b3b] type 0 class 0x000c03 >[ 0.941218] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f] >[ 0.941255] pci 0000:00:1a.1: [8086:3b3e] type 0 class 0x000c03 >[ 0.941292] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f] >[ 0.941329] pci 0000:00:1a.2: [8086:3b3f] type 0 class 0x000c03 >[ 0.941366] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f] >[ 0.941411] pci 0000:00:1a.7: [8086:3b3c] type 0 class 0x000c03 >[ 0.941429] pci 0000:00:1a.7: reg 10: [mem 0xfbfff000-0xfbfff3ff] >[ 0.941494] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold >[ 0.941497] pci 0000:00:1a.7: PME# disabled >[ 0.941516] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403 >[ 0.941529] pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit] >[ 0.941576] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >[ 0.941578] pci 0000:00:1b.0: PME# disabled >[ 0.941593] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 >[ 0.941640] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >[ 0.941643] pci 0000:00:1c.0: PME# disabled >[ 0.941658] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604 >[ 0.941707] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >[ 0.941709] pci 0000:00:1c.1: PME# disabled >[ 0.941725] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604 >[ 0.941773] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold >[ 0.941776] pci 0000:00:1c.2: PME# disabled >[ 0.941794] pci 0000:00:1c.6: [8086:3b4e] type 1 class 0x000604 >[ 0.941841] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold >[ 0.941844] pci 0000:00:1c.6: PME# disabled >[ 0.941861] pci 0000:00:1d.0: [8086:3b36] type 0 class 0x000c03 >[ 0.941898] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f] >[ 0.941935] pci 0000:00:1d.1: [8086:3b37] type 0 class 0x000c03 >[ 0.941972] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f] >[ 0.942009] pci 0000:00:1d.2: [8086:3b38] type 0 class 0x000c03 >[ 0.942046] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f] >[ 0.942083] pci 0000:00:1d.3: [8086:3b39] type 0 class 0x000c03 >[ 0.942120] pci 0000:00:1d.3: reg 20: [io 0xf900-0xf91f] >[ 0.942166] pci 0000:00:1d.7: [8086:3b34] type 0 class 0x000c03 >[ 0.942184] pci 0000:00:1d.7: reg 10: [mem 0xfbffe000-0xfbffe3ff] >[ 0.942248] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold >[ 0.942252] pci 0000:00:1d.7: PME# disabled >[ 0.942267] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 >[ 0.942316] pci 0000:00:1f.0: [8086:3b02] type 0 class 0x000601 >[ 0.942417] pci 0000:00:1f.2: [8086:3b22] type 0 class 0x000106 >[ 0.942433] pci 0000:00:1f.2: reg 10: [io 0xf800-0xf807] >[ 0.942440] pci 0000:00:1f.2: reg 14: [io 0xf700-0xf703] >[ 0.942446] pci 0000:00:1f.2: reg 18: [io 0xf600-0xf607] >[ 0.942453] pci 0000:00:1f.2: reg 1c: [io 0xf500-0xf503] >[ 0.942459] pci 0000:00:1f.2: reg 20: [io 0xf400-0xf41f] >[ 0.942466] pci 0000:00:1f.2: reg 24: [mem 0xfbffd000-0xfbffd7ff] >[ 0.942495] pci 0000:00:1f.2: PME# supported from D3hot >[ 0.942497] pci 0000:00:1f.2: PME# disabled >[ 0.942510] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05 >[ 0.942523] pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit] >[ 0.942541] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] >[ 0.942594] pci 0000:01:00.0: [10de:0e22] type 0 class 0x000300 >[ 0.942603] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf7ffffff] >[ 0.942612] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xe7ffffff 64bit pref] >[ 0.942621] pci 0000:01:00.0: reg 1c: [mem 0xec000000-0xefffffff 64bit pref] >[ 0.942627] pci 0000:01:00.0: reg 24: [io 0xcf00-0xcf7f] >[ 0.942633] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] >[ 0.942669] pci 0000:01:00.1: [10de:0beb] type 0 class 0x000403 >[ 0.942679] pci 0000:01:00.1: reg 10: [mem 0xf9ffc000-0xf9ffffff] >[ 0.944678] pci 0000:00:03.0: PCI bridge to [bus 01-01] >[ 0.944884] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] >[ 0.944886] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff] >[ 0.944890] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] >[ 0.944924] pci 0000:02:00.0: [1b4b:9128] type 0 class 0x000106 >[ 0.944933] pci 0000:02:00.0: reg 10: [io 0xdf00-0xdf07] >[ 0.944940] pci 0000:02:00.0: reg 14: [io 0xde00-0xde03] >[ 0.944946] pci 0000:02:00.0: reg 18: [io 0xdd00-0xdd07] >[ 0.944953] pci 0000:02:00.0: reg 1c: [io 0xdc00-0xdc03] >[ 0.944959] pci 0000:02:00.0: reg 20: [io 0xdb00-0xdb0f] >[ 0.944966] pci 0000:02:00.0: reg 24: [mem 0xfbaff000-0xfbaff7ff] >[ 0.944972] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] >[ 0.944990] pci 0000:02:00.0: PME# supported from D3hot >[ 0.944993] pci 0000:02:00.0: PME# disabled >[ 0.946671] pci 0000:00:05.0: PCI bridge to [bus 02-02] >[ 0.946876] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] >[ 0.946878] pci 0000:00:05.0: bridge window [mem 0xfba00000-0xfbafffff] >[ 0.946882] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) >[ 0.946931] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200 >[ 0.946946] pci 0000:03:00.0: reg 10: [io 0xbe00-0xbeff] >[ 0.946972] pci 0000:03:00.0: reg 18: [mem 0xfb7ff000-0xfb7fffff 64bit pref] >[ 0.946989] pci 0000:03:00.0: reg 20: [mem 0xfb7f8000-0xfb7fbfff 64bit pref] >[ 0.947000] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] >[ 0.947035] pci 0000:03:00.0: supports D1 D2 >[ 0.947037] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold >[ 0.947041] pci 0000:03:00.0: PME# disabled >[ 0.948672] pci 0000:00:1c.0: PCI bridge to [bus 03-03] >[ 0.948878] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff] >[ 0.948881] pci 0000:00:1c.0: bridge window [mem 0xfb800000-0xfb8fffff] >[ 0.948886] pci 0000:00:1c.0: bridge window [mem 0xfb700000-0xfb7fffff 64bit pref] >[ 0.948935] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200 >[ 0.948950] pci 0000:04:00.0: reg 10: [io 0xae00-0xaeff] >[ 0.948975] pci 0000:04:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit pref] >[ 0.948992] pci 0000:04:00.0: reg 20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref] >[ 0.949003] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] >[ 0.949038] pci 0000:04:00.0: supports D1 D2 >[ 0.949040] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold >[ 0.949044] pci 0000:04:00.0: PME# disabled >[ 0.950669] pci 0000:00:1c.1: PCI bridge to [bus 04-04] >[ 0.950875] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff] >[ 0.950877] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff] >[ 0.950882] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref] >[ 0.950938] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03 >[ 0.950963] pci 0000:05:00.0: reg 10: [mem 0xfbcfe000-0xfbcfffff 64bit] >[ 0.951065] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold >[ 0.951070] pci 0000:05:00.0: PME# disabled >[ 0.952667] pci 0000:00:1c.2: PCI bridge to [bus 05-05] >[ 0.952873] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) >[ 0.952876] pci 0000:00:1c.2: bridge window [mem 0xfbc00000-0xfbcfffff] >[ 0.952880] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) >[ 0.952929] pci 0000:06:00.0: [197b:2363] type 0 class 0x000106 >[ 0.953011] pci 0000:06:00.0: reg 24: [mem 0xfbbfe000-0xfbbfffff] >[ 0.953051] pci 0000:06:00.0: PME# supported from D3hot >[ 0.953055] pci 0000:06:00.0: PME# disabled >[ 0.953079] pci 0000:06:00.1: [197b:2363] type 0 class 0x000101 >[ 0.953102] pci 0000:06:00.1: reg 10: [io 0xef00-0xef07] >[ 0.953114] pci 0000:06:00.1: reg 14: [io 0xee00-0xee03] >[ 0.953127] pci 0000:06:00.1: reg 18: [io 0xed00-0xed07] >[ 0.953139] pci 0000:06:00.1: reg 1c: [io 0xec00-0xec03] >[ 0.953151] pci 0000:06:00.1: reg 20: [io 0xeb00-0xeb0f] >[ 0.953216] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' >[ 0.953587] pci 0000:00:1c.6: PCI bridge to [bus 06-06] >[ 0.953794] pci 0000:00:1c.6: bridge window [io 0xe000-0xefff] >[ 0.953797] pci 0000:00:1c.6: bridge window [mem 0xfbb00000-0xfbbfffff] >[ 0.953802] pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) >[ 0.953831] pci 0000:07:02.0: [1814:0601] type 0 class 0x000280 >[ 0.953846] pci 0000:07:02.0: reg 10: [mem 0xfb9e0000-0xfb9effff] >[ 0.953922] pci 0000:07:06.0: [104c:8024] type 0 class 0x000c00 >[ 0.953937] pci 0000:07:06.0: reg 10: [mem 0xfb9ff000-0xfb9ff7ff] >[ 0.953946] pci 0000:07:06.0: reg 14: [mem 0xfb9f8000-0xfb9fbfff] >[ 0.954000] pci 0000:07:06.0: supports D1 D2 >[ 0.954001] pci 0000:07:06.0: PME# supported from D0 D1 D2 D3hot >[ 0.954004] pci 0000:07:06.0: PME# disabled >[ 0.954018] pci 0000:07:07.0: [1283:8213] type 0 class 0x000101 >[ 0.954032] pci 0000:07:07.0: reg 10: [io 0x9f00-0x9f07] >[ 0.954040] pci 0000:07:07.0: reg 14: [io 0x9e00-0x9e03] >[ 0.954048] pci 0000:07:07.0: reg 18: [io 0x9d00-0x9d07] >[ 0.954057] pci 0000:07:07.0: reg 1c: [io 0x9c00-0x9c03] >[ 0.954065] pci 0000:07:07.0: reg 20: [io 0x9b00-0x9b0f] >[ 0.954125] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode) >[ 0.954343] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] >[ 0.954346] pci 0000:00:1e.0: bridge window [mem 0xfb900000-0xfb9fffff] >[ 0.954351] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) >[ 0.954352] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) >[ 0.954354] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) >[ 0.954356] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) >[ 0.954357] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) >[ 0.954359] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) >[ 0.954361] pci 0000:00:1e.0: bridge window [mem 0xdf7f0000-0xfebfffff] (subtractive decode) >[ 0.954384] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >[ 0.954503] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] >[ 0.954525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] >[ 0.954545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] >[ 0.954569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] >[ 0.954598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] >[ 0.965911] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) >[ 0.966841] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) >[ 0.967769] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) >[ 0.968695] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) >[ 0.969620] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. >[ 0.970643] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) >[ 0.971569] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) >[ 0.972496] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) >[ 0.973500] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none >[ 0.973853] vgaarb: loaded >[ 0.974122] SCSI subsystem initialized >[ 0.974375] libata version 3.00 loaded. >[ 0.974472] usbcore: registered new interface driver usbfs >[ 0.974703] usbcore: registered new interface driver hub >[ 0.974935] usbcore: registered new device driver usb >[ 0.975374] Advanced Linux Sound Architecture Driver Version 1.0.23. >[ 0.975604] PCI: Using ACPI for IRQ routing >[ 0.975803] PCI: pci_cache_line_size set to 64 bytes >[ 0.975903] Expanded resource reserved due to conflict with PCI Bus 0000:00 >[ 0.976120] reserve RAM buffer: 000000000009dc00 - 000000000009ffff >[ 0.976122] reserve RAM buffer: 00000000df7a0000 - 00000000dfffffff >[ 0.976223] Bluetooth: Core ver 2.15 >[ 0.976434] NET: Registered protocol family 31 >[ 0.976634] Bluetooth: HCI device and connection manager initialized >[ 0.976847] Bluetooth: HCI socket layer initialized >[ 0.977101] cfg80211: Calling CRDA to update world regulatory domain >[ 0.977440] NetLabel: Initializing >[ 0.977632] NetLabel: domain hash size = 128 >[ 0.977829] NetLabel: protocols = UNLABELED CIPSOv4 >[ 0.978036] NetLabel: unlabeled traffic allowed by default >[ 0.978299] HPET: 8 timers in total, 5 timers will be used for per-cpu timer >[ 0.978522] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0 >[ 0.979122] hpet0: 8 comparators, 64-bit 14.318180 MHz counter >[ 0.981620] hpet: hpet2 irq 40 for MSI >[ 0.981724] hpet: hpet3 irq 41 for MSI >[ 0.982755] hpet: hpet4 irq 42 for MSI >[ 0.983751] hpet: hpet5 irq 43 for MSI >[ 0.984733] hpet: hpet6 irq 44 for MSI >[ 0.988693] Switching to clocksource tsc >[ 0.991805] pnp: PnP ACPI init >[ 0.992006] ACPI: bus type pnp registered >[ 0.992264] pnp 00:00: [bus 00-3f] >[ 0.992265] pnp 00:00: [io 0x0cf8-0x0cff] >[ 0.992267] pnp 00:00: [io 0x0000-0x0cf7 window] >[ 0.992268] pnp 00:00: [io 0x0d00-0xffff window] >[ 0.992269] pnp 00:00: [mem 0x000a0000-0x000bffff window] >[ 0.992271] pnp 00:00: [mem 0x000c0000-0x000dffff window] >[ 0.992272] pnp 00:00: [mem 0xfed40000-0xfed44fff window] >[ 0.992274] pnp 00:00: [mem 0xdf7f0000-0xfebfffff window] >[ 0.992340] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) >[ 0.992400] pnp 00:01: [io 0x0010-0x001f] >[ 0.992402] pnp 00:01: [io 0x0022-0x003f] >[ 0.992403] pnp 00:01: [io 0x0044-0x004d] >[ 0.992404] pnp 00:01: [io 0x0050-0x005f] >[ 0.992405] pnp 00:01: [io 0x0062-0x0063] >[ 0.992406] pnp 00:01: [io 0x0065-0x006f] >[ 0.992407] pnp 00:01: [io 0x0074-0x007f] >[ 0.992408] pnp 00:01: [io 0x0091-0x0093] >[ 0.992411] pnp 00:01: [io 0x00a2-0x00bf] >[ 0.992412] pnp 00:01: [io 0x00e0-0x00ef] >[ 0.992413] pnp 00:01: [io 0x04d0-0x04d1] >[ 0.992415] pnp 00:01: [io 0x0290-0x029f] >[ 0.992416] pnp 00:01: [io 0x0800-0x0805] >[ 0.992417] pnp 00:01: [io 0x0290-0x0294] >[ 0.992418] pnp 00:01: [io 0x0880-0x088f] >[ 0.992490] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) >[ 0.992499] pnp 00:02: [dma 4] >[ 0.992500] pnp 00:02: [io 0x0000-0x000f] >[ 0.992501] pnp 00:02: [io 0x0080-0x0090] >[ 0.992502] pnp 00:02: [io 0x0094-0x009f] >[ 0.992504] pnp 00:02: [io 0x00c0-0x00df] >[ 0.992546] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) >[ 0.992590] pnp 00:03: [irq 0 disabled] >[ 0.992595] pnp 00:03: [irq 8] >[ 0.992597] pnp 00:03: [mem 0xfed00000-0xfed003ff] >[ 0.992639] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) >[ 0.992665] pnp 00:04: [io 0x0070-0x0073] >[ 0.992707] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) >[ 0.992714] pnp 00:05: [io 0x0061] >[ 0.992756] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) >[ 0.992763] pnp 00:06: [io 0x00f0-0x00ff] >[ 0.992768] pnp 00:06: [irq 13] >[ 0.992809] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) >[ 0.993020] pnp 00:07: [io 0x03f8-0x03ff] >[ 0.993025] pnp 00:07: [irq 4] >[ 0.993085] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) >[ 0.993140] pnp 00:08: [io 0x0400-0x047f] >[ 0.993141] pnp 00:08: [io 0x0580-0x05ff] >[ 0.993202] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) >[ 0.993341] pnp 00:09: [mem 0xf0000000-0xf3ffffff] >[ 0.993408] pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) >[ 0.993552] pnp 00:0a: [mem 0x000f0000-0x000f3fff] >[ 0.993554] pnp 00:0a: [mem 0x000f4000-0x000f7fff] >[ 0.993555] pnp 00:0a: [mem 0x000f8000-0x000fbfff] >[ 0.993556] pnp 00:0a: [mem 0x000fc000-0x000fffff] >[ 0.993558] pnp 00:0a: [mem 0xdf7a0000-0xdf7dffff] >[ 0.993559] pnp 00:0a: [mem 0x00000000-0x0009ffff] >[ 0.993560] pnp 00:0a: [mem 0x00100000-0xdf79ffff] >[ 0.993561] pnp 00:0a: [mem 0xdf7e0000-0xdf7fffff] >[ 0.993562] pnp 00:0a: [mem 0xfec00000-0xfec00fff] >[ 0.993564] pnp 00:0a: [mem 0xfed10000-0xfed1dfff] >[ 0.993566] pnp 00:0a: [mem 0xfed20000-0xfed8ffff] >[ 0.993567] pnp 00:0a: [mem 0xfee00000-0xfee00fff] >[ 0.993569] pnp 00:0a: [mem 0xffb00000-0xffb7ffff] >[ 0.993570] pnp 00:0a: [mem 0xfff00000-0xffffffff] >[ 0.993571] pnp 00:0a: [mem 0x000e0000-0x000effff] >[ 0.993653] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) >[ 0.993670] pnp 00:0b: [mem 0xffb80000-0xffbfffff] >[ 0.993721] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active) >[ 0.993726] pnp: PnP ACPI: found 12 devices >[ 0.993926] ACPI: ACPI bus type pnp unregistered >[ 0.994129] system 00:01: [io 0x04d0-0x04d1] has been reserved >[ 0.994339] system 00:01: [io 0x0290-0x029f] has been reserved >[ 0.994547] system 00:01: [io 0x0800-0x0805] has been reserved >[ 0.994756] system 00:01: [io 0x0290-0x0294] has been reserved >[ 0.994969] system 00:01: [io 0x0880-0x088f] has been reserved >[ 0.995181] system 00:08: [io 0x0400-0x047f] has been reserved >[ 0.995390] system 00:08: [io 0x0580-0x05ff] has been reserved >[ 0.995600] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved >[ 0.995815] system 00:0a: [mem 0x000f0000-0x000f3fff] could not be reserved >[ 0.996035] system 00:0a: [mem 0x000f4000-0x000f7fff] could not be reserved >[ 0.996251] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved >[ 0.996468] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved >[ 0.996684] system 00:0a: [mem 0xdf7a0000-0xdf7dffff] could not be reserved >[ 0.996903] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved >[ 0.997121] system 00:0a: [mem 0x00100000-0xdf79ffff] could not be reserved >[ 0.997337] system 00:0a: [mem 0xdf7e0000-0xdf7fffff] could not be reserved >[ 0.997554] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved >[ 0.997770] system 00:0a: [mem 0xfed10000-0xfed1dfff] has been reserved >[ 0.997987] system 00:0a: [mem 0xfed20000-0xfed8ffff] could not be reserved >[ 0.998204] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved >[ 0.998418] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved >[ 0.998632] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved >[ 0.998846] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved >[ 1.006155] pci 0000:00:05.0: BAR 9: assigned [mem 0xfeb00000-0xfebfffff pref] >[ 1.006498] pci 0000:00:1c.2: BAR 9: assigned [mem 0xfe900000-0xfeafffff 64bit pref] >[ 1.006843] pci 0000:00:1c.6: BAR 9: assigned [mem 0xfe700000-0xfe8fffff 64bit pref] >[ 1.007192] pci 0000:00:1c.2: BAR 7: assigned [io 0x8000-0x8fff] >[ 1.007403] pci 0000:01:00.0: BAR 6: assigned [mem 0xebf80000-0xebffffff pref] >[ 1.007743] pci 0000:00:03.0: PCI bridge to [bus 01-01] >[ 1.007950] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] >[ 1.008161] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff] >[ 1.008377] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] >[ 1.008724] pci 0000:02:00.0: BAR 6: assigned [mem 0xfebf0000-0xfebfffff pref] >[ 1.009068] pci 0000:00:05.0: PCI bridge to [bus 02-02] >[ 1.009271] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] >[ 1.009483] pci 0000:00:05.0: bridge window [mem 0xfba00000-0xfbafffff] >[ 1.009699] pci 0000:00:05.0: bridge window [mem 0xfeb00000-0xfebfffff pref] >[ 1.010044] pci 0000:03:00.0: BAR 6: assigned [mem 0xfb7c0000-0xfb7dffff pref] >[ 1.010385] pci 0000:00:1c.0: PCI bridge to [bus 03-03] >[ 1.010589] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff] >[ 1.010801] pci 0000:00:1c.0: bridge window [mem 0xfb800000-0xfb8fffff] >[ 1.011020] pci 0000:00:1c.0: bridge window [mem 0xfb700000-0xfb7fffff 64bit pref] >[ 1.011368] pci 0000:04:00.0: BAR 6: assigned [mem 0xfbdc0000-0xfbddffff pref] >[ 1.011708] pci 0000:00:1c.1: PCI bridge to [bus 04-04] >[ 1.011915] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff] >[ 1.012126] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff] >[ 1.012343] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref] >[ 1.012690] pci 0000:00:1c.2: PCI bridge to [bus 05-05] >[ 1.012897] pci 0000:00:1c.2: bridge window [io 0x8000-0x8fff] >[ 1.013109] pci 0000:00:1c.2: bridge window [mem 0xfbc00000-0xfbcfffff] >[ 1.013326] pci 0000:00:1c.2: bridge window [mem 0xfe900000-0xfeafffff 64bit pref] >[ 1.013673] pci 0000:00:1c.6: PCI bridge to [bus 06-06] >[ 1.013879] pci 0000:00:1c.6: bridge window [io 0xe000-0xefff] >[ 1.014092] pci 0000:00:1c.6: bridge window [mem 0xfbb00000-0xfbbfffff] >[ 1.014308] pci 0000:00:1c.6: bridge window [mem 0xfe700000-0xfe8fffff 64bit pref] >[ 1.014655] pci 0000:00:1e.0: PCI bridge to [bus 07-07] >[ 1.014862] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] >[ 1.015074] pci 0000:00:1e.0: bridge window [mem 0xfb900000-0xfb9fffff] >[ 1.015290] pci 0000:00:1e.0: bridge window [mem pref disabled] >[ 1.015509] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >[ 1.015726] pci 0000:00:03.0: setting latency timer to 64 >[ 1.015729] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >[ 1.015947] pci 0000:00:05.0: setting latency timer to 64 >[ 1.015952] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >[ 1.016167] pci 0000:00:1c.0: setting latency timer to 64 >[ 1.016174] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >[ 1.016390] pci 0000:00:1c.1: setting latency timer to 64 >[ 1.016394] pci 0000:00:1c.2: enabling device (0006 -> 0007) >[ 1.016603] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >[ 1.016818] pci 0000:00:1c.2: setting latency timer to 64 >[ 1.016823] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >[ 1.017042] pci 0000:00:1c.6: setting latency timer to 64 >[ 1.017047] pci 0000:00:1e.0: setting latency timer to 64 >[ 1.017049] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] >[ 1.017051] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] >[ 1.017052] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] >[ 1.017054] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] >[ 1.017055] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] >[ 1.017056] pci_bus 0000:00: resource 9 [mem 0xdf7f0000-0xfebfffff] >[ 1.017058] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] >[ 1.017059] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf9ffffff] >[ 1.017061] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] >[ 1.017062] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] >[ 1.017064] pci_bus 0000:02: resource 1 [mem 0xfba00000-0xfbafffff] >[ 1.017065] pci_bus 0000:02: resource 2 [mem 0xfeb00000-0xfebfffff pref] >[ 1.017067] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] >[ 1.017068] pci_bus 0000:03: resource 1 [mem 0xfb800000-0xfb8fffff] >[ 1.017069] pci_bus 0000:03: resource 2 [mem 0xfb700000-0xfb7fffff 64bit pref] >[ 1.017071] pci_bus 0000:04: resource 0 [io 0xa000-0xafff] >[ 1.017072] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff] >[ 1.017074] pci_bus 0000:04: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref] >[ 1.017075] pci_bus 0000:05: resource 0 [io 0x8000-0x8fff] >[ 1.017077] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff] >[ 1.017078] pci_bus 0000:05: resource 2 [mem 0xfe900000-0xfeafffff 64bit pref] >[ 1.017080] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] >[ 1.017081] pci_bus 0000:06: resource 1 [mem 0xfbb00000-0xfbbfffff] >[ 1.017082] pci_bus 0000:06: resource 2 [mem 0xfe700000-0xfe8fffff 64bit pref] >[ 1.017084] pci_bus 0000:07: resource 0 [io 0x9000-0x9fff] >[ 1.017085] pci_bus 0000:07: resource 1 [mem 0xfb900000-0xfb9fffff] >[ 1.017087] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7] >[ 1.017088] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff] >[ 1.017090] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff] >[ 1.017091] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff] >[ 1.017092] pci_bus 0000:07: resource 8 [mem 0xfed40000-0xfed44fff] >[ 1.017094] pci_bus 0000:07: resource 9 [mem 0xdf7f0000-0xfebfffff] >[ 1.017115] NET: Registered protocol family 2 >[ 1.017474] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) >[ 1.018604] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) >[ 1.020859] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >[ 1.021304] TCP: Hash tables configured (established 524288 bind 65536) >[ 1.021518] TCP reno registered >[ 1.021716] UDP hash table entries: 4096 (order: 5, 131072 bytes) >[ 1.021980] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) >[ 1.022306] NET: Registered protocol family 1 >[ 1.022575] RPC: Registered udp transport module. >[ 1.022774] RPC: Registered tcp transport module. >[ 1.022978] RPC: Registered tcp NFSv4.1 backchannel transport module. >[ 1.023211] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0710 >[ 1.023212] pci 0000:00:1a.0: Performing full reset >[ 1.023227] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010 >[ 1.023228] pci 0000:00:1a.1: Performing full reset >[ 1.023242] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x2010 >[ 1.023243] pci 0000:00:1a.2: Performing full reset >[ 1.023269] pci 0000:00:1a.7: EHCI: BIOS handoff >[ 1.034851] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0030 >[ 1.034852] pci 0000:00:1d.0: Performing full reset >[ 1.034866] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 >[ 1.034868] pci 0000:00:1d.1: Performing full reset >[ 1.034882] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 >[ 1.034883] pci 0000:00:1d.2: Performing full reset >[ 1.034897] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 >[ 1.034898] pci 0000:00:1d.3: Performing full reset >[ 1.034921] pci 0000:00:1d.7: EHCI: BIOS handoff >[ 1.045833] pci 0000:01:00.0: Boot video device >[ 1.047909] pci 0000:05:00.0: xHCI HW did not halt within 2000 usec status = 0x0 >[ 1.048264] PCI: CLS 64 bytes, default 64 >[ 1.048281] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >[ 1.048493] Placing 64MB software IO TLB between ffff8800db400000 - ffff8800df400000 >[ 1.048841] software IO TLB at phys 0xdb400000 - 0xdf400000 >[ 1.051123] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4 >[ 1.051334] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4 >[ 1.051546] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4 >[ 1.051757] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4 >[ 1.051968] microcode: CPU4 sig=0x106e5, pf=0x2, revision=0x4 >[ 1.052179] microcode: CPU5 sig=0x106e5, pf=0x2, revision=0x4 >[ 1.052389] microcode: CPU6 sig=0x106e5, pf=0x2, revision=0x4 >[ 1.052599] microcode: CPU7 sig=0x106e5, pf=0x2, revision=0x4 >[ 1.052836] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba >[ 1.053189] Scanning for low memory corruption every 60 seconds >[ 1.053435] Intel AES-NI instructions are not detected. >[ 1.053801] audit: initializing netlink socket (disabled) >[ 1.054011] type=2000 audit(1293184822.866:1): initialized >[ 1.071372] HugeTLB registered 2 MB page size, pre-allocated 0 pages >[ 1.074108] VFS: Disk quotas dquot_6.5.2 >[ 1.074360] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >[ 1.074747] DLM (built Dec 11 2010 15:45:17) installed >[ 1.075662] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). >[ 1.076077] fuse init (API version 7.15) >[ 1.076426] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled >[ 1.077274] SGI XFS Quota Management subsystem >[ 1.077756] GFS2 (built Dec 11 2010 15:45:43) installed >[ 1.077963] msgmni has been set to 15973 >[ 1.078234] SELinux: Registering netfilter hooks >[ 1.078848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) >[ 1.081477] io scheduler noop registered >[ 1.081670] io scheduler deadline registered >[ 1.081920] io scheduler cfq registered (default) >[ 1.082371] intel_idle: MWAIT substates: 0x1120 >[ 1.082373] intel_idle: v0.4 model 0x1E >[ 1.082374] intel_idle: lapic_timer_reliable_states 0x2 >[ 1.082702] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 >[ 1.083056] ACPI: Power Button [PWRB] >[ 1.083300] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 >[ 1.083642] ACPI: Power Button [PWRF] >[ 1.083941] ACPI: acpi_idle yielding to intel_idle >[ 1.086179] Non-volatile memory driver v1.3 >[ 1.086376] Linux agpgart interface v0.103 >[ 1.086655] [drm] Initialized drm 1.1.0 20060810 >[ 1.086857] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! >[ 1.087200] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled >[ 1.351424] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >[ 1.436756] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >[ 1.450305] brd: module loaded >[ 1.451040] loop: module loaded >[ 1.451413] ahci 0000:00:1f.2: version 3.0 >[ 1.451426] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 >[ 1.451669] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X >[ 1.451690] ahci: SSS flag set, parallel bus scan disabled >[ 1.462127] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode >[ 1.462476] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst >[ 1.462830] ahci 0000:00:1f.2: setting latency timer to 64 >[ 1.472636] scsi0 : ahci >[ 1.472899] scsi1 : ahci >[ 1.473151] scsi2 : ahci >[ 1.473397] scsi3 : ahci >[ 1.473644] scsi4 : ahci >[ 1.473890] scsi5 : ahci >[ 1.474190] ata1: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd100 irq 45 >[ 1.474532] ata2: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd180 irq 45 >[ 1.474875] ata3: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd200 irq 45 >[ 1.475219] ata4: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd280 irq 45 >[ 1.475560] ata5: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd300 irq 45 >[ 1.475902] ata6: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd380 irq 45 >[ 1.476257] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >[ 1.476499] ahci 0000:02:00.0: irq 46 for MSI/MSI-X >[ 1.487094] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode >[ 1.487442] ahci 0000:02:00.0: flags: 64bit ncq pio >[ 1.487645] ahci 0000:02:00.0: setting latency timer to 64 >[ 1.488594] scsi6 : ahci >[ 1.488841] scsi7 : ahci >[ 1.489093] scsi8 : ahci >[ 1.489343] scsi9 : ahci >[ 1.489591] scsi10 : ahci >[ 1.489841] scsi11 : ahci >[ 1.490095] scsi12 : ahci >[ 1.490344] scsi13 : ahci >[ 1.490584] ata7: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff100 irq 46 >[ 1.490926] ata8: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff180 irq 46 >[ 1.491269] ata9: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff200 irq 46 >[ 1.491611] ata10: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff280 irq 46 >[ 1.491954] ata11: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff300 irq 46 >[ 1.492298] ata12: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff380 irq 46 >[ 1.492641] ata13: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff400 irq 46 >[ 1.492983] ata14: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff480 irq 46 >[ 1.493340] ahci 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 >[ 1.504059] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode >[ 1.504407] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part >[ 1.504628] ahci 0000:06:00.0: setting latency timer to 64 >[ 1.504917] scsi14 : ahci >[ 1.505177] scsi15 : ahci >[ 1.505441] ata15: SATA max UDMA/133 abar m8192@0xfbbfe000 port 0xfbbfe100 irq 18 >[ 1.505785] ata16: SATA max UDMA/133 abar m8192@0xfbbfe000 port 0xfbbfe180 irq 18 >[ 1.506797] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI >[ 1.507014] e1000: Copyright (c) 1999-2006 Intel Corporation. >[ 1.507256] VMware vmxnet3 virtual NIC driver - version 1.0.14.0-k-NAPI >[ 1.507495] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI >[ 1.507704] e100: Copyright(c) 1999-2006 Intel Corporation >[ 1.507966] sky2: driver version 1.28 >[ 1.508274] tun: Universal TUN/TAP device driver, 1.6 >[ 1.508476] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> >[ 1.508722] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded >[ 1.508937] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >[ 1.509182] r8169 0000:03:00.0: setting latency timer to 64 >[ 1.509227] r8169 0000:03:00.0: irq 47 for MSI/MSI-X >[ 1.509409] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc90000c7a000, 00:24:1d:cc:ea:ff, XID 083000c0 IRQ 47 >[ 1.557941] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded >[ 1.558154] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >[ 1.558394] r8169 0000:04:00.0: setting latency timer to 64 >[ 1.558440] r8169 0000:04:00.0: irq 48 for MSI/MSI-X >[ 1.558620] r8169 0000:04:00.0: eth1: RTL8168d/8111d at 0xffffc90005796000, 00:24:1d:cc:ea:ef, XID 083000c0 IRQ 48 >[ 1.607964] rt2800pci 0000:07:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 >[ 1.615979] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' >[ 1.616223] Registered led device: rt2800pci-phy0::radio >[ 1.616245] Registered led device: rt2800pci-phy0::assoc >[ 1.616269] Registered led device: rt2800pci-phy0::quality >[ 1.616312] usbcore: registered new interface driver rt2500usb >[ 1.616539] usbcore: registered new interface driver rt73usb >[ 1.616766] usbcore: registered new interface driver rt2800usb >[ 1.616984] console [netcon0] enabled >[ 1.617175] netconsole: network logging started >[ 1.617411] firewire_ohci 0000:07:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >[ 1.667804] firewire_ohci: Added fw-ohci device 0000:07:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 >[ 1.668310] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >[ 1.668524] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 >[ 1.668537] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >[ 1.668767] ehci_hcd 0000:00:1a.7: setting latency timer to 64 >[ 1.668770] ehci_hcd 0000:00:1a.7: EHCI Host Controller >[ 1.668983] drivers/usb/core/inode.c: creating file 'devices' >[ 1.668985] drivers/usb/core/inode.c: creating file '001' >[ 1.669023] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 >[ 1.676739] ehci_hcd 0000:00:1a.7: reset hcs_params 0x203206 dbg=2 cc=3 pcc=2 ordered !ppc ports=6 >[ 1.676742] ehci_hcd 0000:00:1a.7: reset hcc_params 36881 caching frame 1024 64 bit addr >[ 1.676752] ehci_hcd 0000:00:1a.7: support lpm >[ 1.676760] ehci_hcd 0000:00:1a.7: debug port 2 >[ 1.676960] ehci_hcd 0000:00:1a.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT >[ 1.680847] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported >[ 1.680849] ehci_hcd 0000:00:1a.7: supports USB remote wakeup >[ 1.680852] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfff000 >[ 1.681060] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT >[ 1.684928] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN >[ 1.690716] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 >[ 1.690937] usb usb1: default language 0x0409 >[ 1.690941] usb usb1: udev 1, busnum 1, minor = 0 >[ 1.690943] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 >[ 1.691158] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 1.691498] usb usb1: Product: EHCI Host Controller >[ 1.691698] usb usb1: Manufacturer: Linux 2.6.37-rc4 ehci_hcd >[ 1.691908] usb usb1: SerialNumber: 0000:00:1a.7 >[ 1.692150] usb usb1: usb_probe_device >[ 1.692152] usb usb1: configuration #1 chosen from 1 choice >[ 1.692156] usb usb1: adding 1-0:1.0 (config #1, interface 0) >[ 1.692189] hub 1-0:1.0: usb_probe_interface >[ 1.692190] hub 1-0:1.0: usb_probe_interface - got id >[ 1.692192] hub 1-0:1.0: USB hub found >[ 1.692386] hub 1-0:1.0: 6 ports detected >[ 1.692579] hub 1-0:1.0: standalone hub >[ 1.692580] hub 1-0:1.0: no power switching (usb 1.0) >[ 1.692582] hub 1-0:1.0: individual port over-current protection >[ 1.692583] hub 1-0:1.0: power on to power good time: 20ms >[ 1.692586] hub 1-0:1.0: local power source is good >[ 1.692587] hub 1-0:1.0: trying to enable port power on non-switchable hub >[ 1.692609] drivers/usb/core/inode.c: creating file '001' >[ 1.692644] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 >[ 1.692874] ehci_hcd 0000:00:1d.7: setting latency timer to 64 >[ 1.692876] ehci_hcd 0000:00:1d.7: EHCI Host Controller >[ 1.693081] drivers/usb/core/inode.c: creating file '002' >[ 1.693118] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 >[ 1.702695] ehci_hcd 0000:00:1d.7: reset hcs_params 0x204208 dbg=2 cc=4 pcc=2 ordered !ppc ports=8 >[ 1.702698] ehci_hcd 0000:00:1d.7: reset hcc_params 36881 caching frame 1024 64 bit addr >[ 1.702708] ehci_hcd 0000:00:1d.7: support lpm >[ 1.702716] ehci_hcd 0000:00:1d.7: debug port 2 >[ 1.702916] ehci_hcd 0000:00:1d.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT >[ 1.706809] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported >[ 1.706811] ehci_hcd 0000:00:1d.7: supports USB remote wakeup >[ 1.706820] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffe000 >[ 1.707029] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT >[ 1.710925] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN >[ 1.716680] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 >[ 1.716900] usb usb2: default language 0x0409 >[ 1.716904] usb usb2: udev 1, busnum 2, minor = 128 >[ 1.716906] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 >[ 1.717121] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 1.717461] usb usb2: Product: EHCI Host Controller >[ 1.717661] usb usb2: Manufacturer: Linux 2.6.37-rc4 ehci_hcd >[ 1.717872] usb usb2: SerialNumber: 0000:00:1d.7 >[ 1.718113] usb usb2: usb_probe_device >[ 1.718114] usb usb2: configuration #1 chosen from 1 choice >[ 1.718118] usb usb2: adding 2-0:1.0 (config #1, interface 0) >[ 1.718146] hub 2-0:1.0: usb_probe_interface >[ 1.718148] hub 2-0:1.0: usb_probe_interface - got id >[ 1.718149] hub 2-0:1.0: USB hub found >[ 1.718343] hub 2-0:1.0: 8 ports detected >[ 1.718536] hub 2-0:1.0: standalone hub >[ 1.718537] hub 2-0:1.0: no power switching (usb 1.0) >[ 1.718538] hub 2-0:1.0: individual port over-current protection >[ 1.718540] hub 2-0:1.0: power on to power good time: 20ms >[ 1.718542] hub 2-0:1.0: local power source is good >[ 1.718543] hub 2-0:1.0: trying to enable port power on non-switchable hub >[ 1.718569] drivers/usb/core/inode.c: creating file '001' >[ 1.718615] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >[ 1.718830] ohci_hcd: block sizes: ed 80 td 96 >[ 1.718862] uhci_hcd: USB Universal Host Controller Interface driver >[ 1.719093] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >[ 1.719314] uhci_hcd 0000:00:1a.0: setting latency timer to 64 >[ 1.719316] uhci_hcd 0000:00:1a.0: UHCI Host Controller >[ 1.719522] drivers/usb/core/inode.c: creating file '003' >[ 1.719563] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 >[ 1.729650] uhci_hcd 0000:00:1a.0: detected 2 ports >[ 1.729853] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 >[ 1.729855] uhci_hcd 0000:00:1a.0: Performing full reset >[ 1.729867] uhci_hcd 0000:00:1a.0: supports USB remote wakeup >[ 1.729879] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 >[ 1.730105] usb usb3: default language 0x0409 >[ 1.730108] usb usb3: udev 1, busnum 3, minor = 256 >[ 1.730110] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 >[ 1.730325] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 1.730668] usb usb3: Product: UHCI Host Controller >[ 1.730869] usb usb3: Manufacturer: Linux 2.6.37-rc4 uhci_hcd >[ 1.731076] usb usb3: SerialNumber: 0000:00:1a.0 >[ 1.731317] usb usb3: usb_probe_device >[ 1.731319] usb usb3: configuration #1 chosen from 1 choice >[ 1.731322] usb usb3: adding 3-0:1.0 (config #1, interface 0) >[ 1.731352] hub 3-0:1.0: usb_probe_interface >[ 1.731353] hub 3-0:1.0: usb_probe_interface - got id >[ 1.731355] hub 3-0:1.0: USB hub found >[ 1.731548] hub 3-0:1.0: 2 ports detected >[ 1.731746] hub 3-0:1.0: standalone hub >[ 1.731747] hub 3-0:1.0: no power switching (usb 1.0) >[ 1.731748] hub 3-0:1.0: individual port over-current protection >[ 1.731749] hub 3-0:1.0: power on to power good time: 2ms >[ 1.731751] hub 3-0:1.0: local power source is good >[ 1.731753] hub 3-0:1.0: trying to enable port power on non-switchable hub >[ 1.731764] drivers/usb/core/inode.c: creating file '001' >[ 1.731785] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 >[ 1.731803] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 >[ 1.732024] uhci_hcd 0000:00:1a.1: setting latency timer to 64 >[ 1.732026] uhci_hcd 0000:00:1a.1: UHCI Host Controller >[ 1.732230] drivers/usb/core/inode.c: creating file '004' >[ 1.732267] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 >[ 1.741629] uhci_hcd 0000:00:1a.1: detected 2 ports >[ 1.741832] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 >[ 1.741834] uhci_hcd 0000:00:1a.1: Performing full reset >[ 1.741846] uhci_hcd 0000:00:1a.1: supports USB remote wakeup >[ 1.741856] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 >[ 1.742082] usb usb4: default language 0x0409 >[ 1.742086] usb usb4: udev 1, busnum 4, minor = 384 >[ 1.742087] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 >[ 1.742302] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 1.742646] usb usb4: Product: UHCI Host Controller >[ 1.742847] usb usb4: Manufacturer: Linux 2.6.37-rc4 uhci_hcd >[ 1.743053] usb usb4: SerialNumber: 0000:00:1a.1 >[ 1.743295] usb usb4: usb_probe_device >[ 1.743296] usb usb4: configuration #1 chosen from 1 choice >[ 1.743300] usb usb4: adding 4-0:1.0 (config #1, interface 0) >[ 1.743330] hub 4-0:1.0: usb_probe_interface >[ 1.743331] hub 4-0:1.0: usb_probe_interface - got id >[ 1.743332] hub 4-0:1.0: USB hub found >[ 1.743526] hub 4-0:1.0: 2 ports detected >[ 1.743723] hub 4-0:1.0: standalone hub >[ 1.743724] hub 4-0:1.0: no power switching (usb 1.0) >[ 1.743725] hub 4-0:1.0: individual port over-current protection >[ 1.743727] hub 4-0:1.0: power on to power good time: 2ms >[ 1.743729] hub 4-0:1.0: local power source is good >[ 1.743730] hub 4-0:1.0: trying to enable port power on non-switchable hub >[ 1.743740] drivers/usb/core/inode.c: creating file '001' >[ 1.743764] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 >[ 1.743779] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >[ 1.743999] uhci_hcd 0000:00:1a.2: setting latency timer to 64 >[ 1.744001] uhci_hcd 0000:00:1a.2: UHCI Host Controller >[ 1.744206] drivers/usb/core/inode.c: creating file '005' >[ 1.744242] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 >[ 1.753609] uhci_hcd 0000:00:1a.2: detected 2 ports >[ 1.753812] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 >[ 1.753813] uhci_hcd 0000:00:1a.2: Performing full reset >[ 1.753825] uhci_hcd 0000:00:1a.2: supports USB remote wakeup >[ 1.753830] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 >[ 1.754055] usb usb5: default language 0x0409 >[ 1.754059] usb usb5: udev 1, busnum 5, minor = 512 >[ 1.754060] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 >[ 1.754276] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 1.754619] usb usb5: Product: UHCI Host Controller >[ 1.754820] usb usb5: Manufacturer: Linux 2.6.37-rc4 uhci_hcd >[ 1.757313] usb usb5: SerialNumber: 0000:00:1a.2 >[ 1.757554] usb usb5: usb_probe_device >[ 1.757556] usb usb5: configuration #1 chosen from 1 choice >[ 1.757559] usb usb5: adding 5-0:1.0 (config #1, interface 0) >[ 1.757591] hub 5-0:1.0: usb_probe_interface >[ 1.757592] hub 5-0:1.0: usb_probe_interface - got id >[ 1.757593] hub 5-0:1.0: USB hub found >[ 1.757790] hub 5-0:1.0: 2 ports detected >[ 1.757984] hub 5-0:1.0: standalone hub >[ 1.757985] hub 5-0:1.0: no power switching (usb 1.0) >[ 1.757986] hub 5-0:1.0: individual port over-current protection >[ 1.757987] hub 5-0:1.0: power on to power good time: 2ms >[ 1.757990] hub 5-0:1.0: local power source is good >[ 1.757991] hub 5-0:1.0: trying to enable port power on non-switchable hub >[ 1.758001] drivers/usb/core/inode.c: creating file '001' >[ 1.758021] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 >[ 1.758037] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 >[ 1.758258] uhci_hcd 0000:00:1d.0: setting latency timer to 64 >[ 1.758260] uhci_hcd 0000:00:1d.0: UHCI Host Controller >[ 1.758465] drivers/usb/core/inode.c: creating file '006' >[ 1.758500] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 >[ 1.769581] uhci_hcd 0000:00:1d.0: detected 2 ports >[ 1.769784] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 >[ 1.769785] uhci_hcd 0000:00:1d.0: Performing full reset >[ 1.769797] uhci_hcd 0000:00:1d.0: supports USB remote wakeup >[ 1.769801] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 >[ 1.770026] usb usb6: default language 0x0409 >[ 1.770030] usb usb6: udev 1, busnum 6, minor = 640 >[ 1.770031] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 >[ 1.770247] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 1.770592] usb usb6: Product: UHCI Host Controller >[ 1.770793] usb usb6: Manufacturer: Linux 2.6.37-rc4 uhci_hcd >[ 1.771000] usb usb6: SerialNumber: 0000:00:1d.0 >[ 1.771242] usb usb6: usb_probe_device >[ 1.771244] usb usb6: configuration #1 chosen from 1 choice >[ 1.771247] usb usb6: adding 6-0:1.0 (config #1, interface 0) >[ 1.771277] hub 6-0:1.0: usb_probe_interface >[ 1.771278] hub 6-0:1.0: usb_probe_interface - got id >[ 1.771280] hub 6-0:1.0: USB hub found >[ 1.771473] hub 6-0:1.0: 2 ports detected >[ 1.771670] hub 6-0:1.0: standalone hub >[ 1.771671] hub 6-0:1.0: no power switching (usb 1.0) >[ 1.771672] hub 6-0:1.0: individual port over-current protection >[ 1.771674] hub 6-0:1.0: power on to power good time: 2ms >[ 1.771676] hub 6-0:1.0: local power source is good >[ 1.771677] hub 6-0:1.0: trying to enable port power on non-switchable hub >[ 1.771689] drivers/usb/core/inode.c: creating file '001' >[ 1.771712] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 >[ 1.771725] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 >[ 1.771945] uhci_hcd 0000:00:1d.1: setting latency timer to 64 >[ 1.771948] uhci_hcd 0000:00:1d.1: UHCI Host Controller >[ 1.772152] drivers/usb/core/inode.c: creating file '007' >[ 1.772186] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 >[ 1.781561] uhci_hcd 0000:00:1d.1: detected 2 ports >[ 1.781764] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 >[ 1.781765] uhci_hcd 0000:00:1d.1: Performing full reset >[ 1.781777] uhci_hcd 0000:00:1d.1: supports USB remote wakeup >[ 1.781789] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 >[ 1.782016] usb usb7: default language 0x0409 >[ 1.782019] usb usb7: udev 1, busnum 7, minor = 768 >[ 1.782021] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 >[ 1.782236] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 1.782582] usb usb7: Product: UHCI Host Controller >[ 1.782783] usb usb7: Manufacturer: Linux 2.6.37-rc4 uhci_hcd >[ 1.782990] usb usb7: SerialNumber: 0000:00:1d.1 >[ 1.783232] usb usb7: usb_probe_device >[ 1.783234] usb usb7: configuration #1 chosen from 1 choice >[ 1.783237] usb usb7: adding 7-0:1.0 (config #1, interface 0) >[ 1.783269] hub 7-0:1.0: usb_probe_interface >[ 1.783270] hub 7-0:1.0: usb_probe_interface - got id >[ 1.783271] hub 7-0:1.0: USB hub found >[ 1.783465] hub 7-0:1.0: 2 ports detected >[ 1.783662] hub 7-0:1.0: standalone hub >[ 1.783663] hub 7-0:1.0: no power switching (usb 1.0) >[ 1.783664] hub 7-0:1.0: individual port over-current protection >[ 1.783665] hub 7-0:1.0: power on to power good time: 2ms >[ 1.783668] hub 7-0:1.0: local power source is good >[ 1.783669] hub 7-0:1.0: trying to enable port power on non-switchable hub >[ 1.783678] drivers/usb/core/inode.c: creating file '001' >[ 1.783703] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 >[ 1.783715] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >[ 1.783936] uhci_hcd 0000:00:1d.2: setting latency timer to 64 >[ 1.783938] uhci_hcd 0000:00:1d.2: UHCI Host Controller >[ 1.784142] drivers/usb/core/inode.c: creating file '008' >[ 1.784179] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 >[ 1.784564] ata1: SATA link down (SStatus 0 SControl 300) >[ 1.791547] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 001403 0 ACK POWER sig=k CSC CONNECT >[ 1.791549] hub 1-0:1.0: port 2: status 0501 change 0001 >[ 1.793540] uhci_hcd 0000:00:1d.2: detected 2 ports >[ 1.793743] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 >[ 1.793745] uhci_hcd 0000:00:1d.2: Performing full reset >[ 1.793757] uhci_hcd 0000:00:1d.2: supports USB remote wakeup >[ 1.793760] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 >[ 1.793988] usb usb8: default language 0x0409 >[ 1.793992] usb usb8: udev 1, busnum 8, minor = 896 >[ 1.793993] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 >[ 1.794208] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 1.794556] usb usb8: Product: UHCI Host Controller >[ 1.794757] usb usb8: Manufacturer: Linux 2.6.37-rc4 uhci_hcd >[ 1.794963] usb usb8: SerialNumber: 0000:00:1d.2 >[ 1.795213] usb usb8: usb_probe_device >[ 1.795214] usb usb8: configuration #1 chosen from 1 choice >[ 1.795218] usb usb8: adding 8-0:1.0 (config #1, interface 0) >[ 1.795253] hub 8-0:1.0: usb_probe_interface >[ 1.795255] hub 8-0:1.0: usb_probe_interface - got id >[ 1.795256] hub 8-0:1.0: USB hub found >[ 1.795449] hub 8-0:1.0: 2 ports detected >[ 1.795647] hub 8-0:1.0: standalone hub >[ 1.795648] hub 8-0:1.0: no power switching (usb 1.0) >[ 1.795649] hub 8-0:1.0: individual port over-current protection >[ 1.795650] hub 8-0:1.0: power on to power good time: 2ms >[ 1.795653] hub 8-0:1.0: local power source is good >[ 1.795654] hub 8-0:1.0: trying to enable port power on non-switchable hub >[ 1.795666] drivers/usb/core/inode.c: creating file '001' >[ 1.795691] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 >[ 1.795703] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 >[ 1.795924] uhci_hcd 0000:00:1d.3: setting latency timer to 64 >[ 1.795926] uhci_hcd 0000:00:1d.3: UHCI Host Controller >[ 1.796131] drivers/usb/core/inode.c: creating file '009' >[ 1.796173] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 9 >[ 1.800536] ata12: SATA link down (SStatus 0 SControl 300) >[ 1.800757] ata14: SATA link up <unknown> (SStatus FFFFFF93 SControl 300) >[ 1.800987] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) >[ 1.801211] ata9: SATA link down (SStatus 0 SControl 300) >[ 1.801429] ata10: SATA link down (SStatus 0 SControl 300) >[ 1.801654] ata13: SATA link down (SStatus 0 SControl 300) >[ 1.801869] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 >[ 1.802089] ata11: SATA link down (SStatus 0 SControl 300) >[ 1.802372] ata14.00: configured for UDMA/66 >[ 1.802584] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) >[ 1.804719] ata7.00: HPA detected: current 1953516911, native 1953525168 >[ 1.805013] ata7.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133 >[ 1.805228] ata7.00: 1953516911 sectors, multi 8: LBA48 NCQ (depth 31/32), AA >[ 1.805521] uhci_hcd 0000:00:1d.3: detected 2 ports >[ 1.805725] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 >[ 1.805726] uhci_hcd 0000:00:1d.3: Performing full reset >[ 1.805739] uhci_hcd 0000:00:1d.3: supports USB remote wakeup >[ 1.805742] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900 >[ 1.805970] usb usb9: default language 0x0409 >[ 1.805974] usb usb9: udev 1, busnum 9, minor = 1024 >[ 1.805975] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 >[ 1.806190] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 1.806535] usb usb9: Product: UHCI Host Controller >[ 1.806735] usb usb9: Manufacturer: Linux 2.6.37-rc4 uhci_hcd >[ 1.806942] usb usb9: SerialNumber: 0000:00:1d.3 >[ 1.807188] usb usb9: usb_probe_device >[ 1.807190] usb usb9: configuration #1 chosen from 1 choice >[ 1.807194] usb usb9: adding 9-0:1.0 (config #1, interface 0) >[ 1.807227] hub 9-0:1.0: usb_probe_interface >[ 1.807229] hub 9-0:1.0: usb_probe_interface - got id >[ 1.807230] hub 9-0:1.0: USB hub found >[ 1.807424] hub 9-0:1.0: 2 ports detected >[ 1.807606] ata7.00: configured for UDMA/133 >[ 1.807819] hub 9-0:1.0: standalone hub >[ 1.807821] hub 9-0:1.0: no power switching (usb 1.0) >[ 1.807822] hub 9-0:1.0: individual port over-current protection >[ 1.807823] hub 9-0:1.0: power on to power good time: 2ms >[ 1.807826] hub 9-0:1.0: local power source is good >[ 1.807827] hub 9-0:1.0: trying to enable port power on non-switchable hub >[ 1.807838] drivers/usb/core/inode.c: creating file '001' >[ 1.807866] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 >[ 1.807917] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 >[ 1.808146] xhci_hcd 0000:05:00.0: setting latency timer to 64 >[ 1.808149] xhci_hcd 0000:05:00.0: xHCI Host Controller >[ 1.808354] drivers/usb/core/inode.c: creating file '010' >[ 1.808397] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10 >[ 1.812529] ata16: SATA link down (SStatus 0 SControl 300) >[ 1.813529] ata15: SATA link down (SStatus 0 SControl 300) >[ 1.816280] ata8.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133 >[ 1.816501] ata8.00: 1953525168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA >[ 1.817505] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT >[ 1.817508] hub 2-0:1.0: port 3: status 0501 change 0001 >[ 1.817515] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001803 0 ACK POWER sig=j CSC CONNECT >[ 1.817517] hub 2-0:1.0: port 5: status 0501 change 0001 >[ 1.817523] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT >[ 1.817525] hub 2-0:1.0: port 6: status 0501 change 0001 >[ 1.817665] xhci_hcd 0000:05:00.0: supports USB remote wakeup >[ 1.817669] xhci_hcd 0000:05:00.0: irq 18, io mem 0xfbcfe000 >[ 1.817927] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X >[ 1.817930] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X >[ 1.817932] xhci_hcd 0000:05:00.0: irq 51 for MSI/MSI-X >[ 1.817935] xhci_hcd 0000:05:00.0: irq 52 for MSI/MSI-X >[ 1.817937] xhci_hcd 0000:05:00.0: irq 53 for MSI/MSI-X >[ 1.817940] xhci_hcd 0000:05:00.0: irq 54 for MSI/MSI-X >[ 1.817942] xhci_hcd 0000:05:00.0: irq 55 for MSI/MSI-X >[ 1.817945] xhci_hcd 0000:05:00.0: irq 56 for MSI/MSI-X >[ 1.818833] ata8.00: configured for UDMA/133 >[ 1.821007] usb usb10: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values >[ 1.821378] usb usb10: default language 0x0409 >[ 1.821382] usb usb10: udev 1, busnum 10, minor = 1152 >[ 1.821383] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003 >[ 1.821603] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 1.821943] usb usb10: Product: xHCI Host Controller >[ 1.822144] usb usb10: Manufacturer: Linux 2.6.37-rc4 xhci_hcd >[ 1.822352] usb usb10: SerialNumber: 0000:05:00.0 >[ 1.822608] usb usb10: usb_probe_device >[ 1.822610] usb usb10: configuration #1 chosen from 1 choice >[ 1.822612] xHCI xhci_add_endpoint called for root hub >[ 1.822613] xHCI xhci_check_bandwidth called for root hub >[ 1.822617] usb usb10: adding 10-0:1.0 (config #1, interface 0) >[ 1.822653] hub 10-0:1.0: usb_probe_interface >[ 1.822655] hub 10-0:1.0: usb_probe_interface - got id >[ 1.822656] hub 10-0:1.0: USB hub found >[ 1.822850] hub 10-0:1.0: 4 ports detected >[ 1.823044] hub 10-0:1.0: standalone hub >[ 1.823046] hub 10-0:1.0: individual port power switching >[ 1.823047] hub 10-0:1.0: individual port over-current protection >[ 1.823048] hub 10-0:1.0: TT requires at most 8 FS bit times (666 ns) >[ 1.823049] hub 10-0:1.0: power on to power good time: 20ms >[ 1.823052] hub 10-0:1.0: local power source is good >[ 1.823053] hub 10-0:1.0: enabling power on all ports >[ 1.823102] drivers/usb/core/inode.c: creating file '001' >[ 1.823184] usbcore: registered new interface driver usblp >[ 1.823390] Initializing USB Mass Storage driver... >[ 1.823642] usbcore: registered new interface driver usb-storage >[ 1.823851] USB Mass Storage support registered. >[ 1.824095] usbcore: registered new interface driver libusual >[ 1.824411] PNP: No PS/2 controller found. Probing ports directly. >[ 1.853290] uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00 >[ 1.853307] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 >[ 1.857437] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 >[ 1.858924] Failed to disable AUX port, but continuing anyway... Is this a SiS? >[ 1.859264] If AUX port is really absent please use the 'i8042.noaux' option. >[ 1.871420] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 >[ 1.883395] uhci_hcd 0000:00:1d.1: port 1 portsc 0082,00 >[ 1.891376] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 >[ 1.891381] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s >[ 1.891387] ehci_hcd 0000:00:1a.7: port 2 low speed --> companion >[ 1.895370] uhci_hcd 0000:00:1d.2: port 1 portsc 0082,00 >[ 1.895377] uhci_hcd 0000:00:1d.2: port 2 portsc 0082,00 >[ 1.942307] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC >[ 1.942321] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0004 >[ 1.942324] hub 9-0:1.0: state 7 ports 2 chg 0000 evt 0000 >[ 1.942326] hub 2-0:1.0: state 7 ports 8 chg 0068 evt 0000 >[ 1.942329] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s >[ 1.993485] ehci_hcd 0000:00:1d.7: port 3 high speed >[ 1.993487] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT >[ 2.044114] usb 2-3: new high speed USB device using ehci_hcd and address 2 >[ 2.095331] ehci_hcd 0000:00:1d.7: port 3 high speed >[ 2.095335] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT >[ 2.109104] serio: i8042 KBD port at 0x60,0x64 irq 1 >[ 2.109375] mice: PS/2 mouse device common for all mice >[ 2.109716] I2O subsystem v1.325 >[ 2.109905] i2o: max drivers = 8 >[ 2.110204] rtc_cmos 00:04: RTC can wake from S4 >[ 2.117034] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 >[ 2.117266] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs >[ 2.117503] i2c /dev entries driver >[ 2.117756] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >[ 2.118326] test_power_get_battery_property: some properties deliberately report errors. >[ 2.118673] power_supply test_battery: driver failed to report `charge_full' property >[ 2.119029] test_power_get_battery_property: some properties deliberately report errors. >[ 2.119376] power_supply test_battery: driver failed to report `charge_full' property >[ 2.119749] md: linear personality registered for level -1 >[ 2.119955] md: raid0 personality registered for level 0 >[ 2.120162] md: raid1 personality registered for level 1 >[ 2.120366] md: raid10 personality registered for level 10 >[ 2.120571] md: raid6 personality registered for level 6 >[ 2.120775] md: raid5 personality registered for level 5 >[ 2.120982] md: raid4 personality registered for level 4 >[ 2.121185] md: multipath personality registered for level -4 >[ 2.121515] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com >[ 2.122717] cpuidle: using governor ladder >[ 2.124433] cpuidle: using governor menu >[ 2.124655] sdhci: Secure Digital Host Controller Interface driver >[ 2.124866] sdhci: Copyright(c) Pierre Ossman >[ 2.125101] wbsd: Winbond W83L51xD SD/MMC card interface driver >[ 2.125310] wbsd: Copyright(c) Pierre Ossman >[ 2.125560] via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc. >[ 2.125966] usbcore: registered new interface driver ushc >[ 2.127043] usbcore: registered new interface driver usbhid >[ 2.127249] usbhid: USB HID core driver >[ 2.127779] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 >[ 2.128155] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X >[ 2.128171] HDA Intel 0000:00:1b.0: setting latency timer to 64 >[ 2.141092] hda_codec: ALC889: BIOS auto-probing. >[ 2.147429] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >[ 2.147770] hda_intel: Disable MSI for Nvidia chipset >[ 2.147987] HDA Intel 0000:01:00.1: setting latency timer to 64 >[ 2.158280] ehci_hcd 0000:00:1d.7: set dev address 2 for port 3 >[ 2.158284] ehci_hcd 0000:00:1d.7: LPM: no device attached >[ 2.159015] usb 2-3: default language 0x0409 >[ 2.160028] usb 2-3: udev 2, busnum 2, minor = 129 >[ 2.160031] usb 2-3: New USB device found, idVendor=058f, idProduct=6362 >[ 2.160246] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >[ 2.160464] usb 2-3: Product: Mass Storage Device >[ 2.160663] usb 2-3: Manufacturer: Generic >[ 2.160857] usb 2-3: SerialNumber: 058F63626376 >[ 2.161143] usb 2-3: usb_probe_device >[ 2.161144] usb 2-3: configuration #1 chosen from 1 choice >[ 2.161367] usb 2-3: adding 2-3:1.0 (config #1, interface 0) >[ 2.161436] usb-storage 2-3:1.0: usb_probe_interface >[ 2.161439] usb-storage 2-3:1.0: usb_probe_interface - got id >[ 2.161483] scsi16 : usb-storage 2-3:1.0 >[ 2.161811] drivers/usb/core/inode.c: creating file '002' >[ 2.161830] hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s >[ 2.168070] firewire_core: created device fw0: GUID 00cc27de0000241d, S400 >[ 2.212155] ehci_hcd 0000:00:1d.7: port 5 high speed >[ 2.212158] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT >[ 2.243796] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >[ 2.245613] ata2.00: ATAPI: ATAPI iHAS424 Y, ZL1U, max UDMA/100 >[ 2.247698] ata2.00: configured for UDMA/100 >[ 2.249458] scsi 1:0:0:0: CD-ROM ATAPI iHAS424 Y ZL1U PQ: 0 ANSI: 5 >[ 2.254468] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray >[ 2.254822] cdrom: Uniform CD-ROM driver Revision: 3.20 >[ 2.255206] sr 1:0:0:0: Attached scsi CD-ROM sr0 >[ 2.255326] sr 1:0:0:0: Attached scsi generic sg0 type 5 >[ 2.262845] usb 2-5: new high speed USB device using ehci_hcd and address 3 >[ 2.314000] ehci_hcd 0000:00:1d.7: port 5 high speed >[ 2.314003] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT >[ 2.376985] ehci_hcd 0000:00:1d.7: set dev address 3 for port 5 >[ 2.376989] ehci_hcd 0000:00:1d.7: LPM: no device attached >[ 2.377803] usb 2-5: default language 0x0409 >[ 2.378178] usb 2-5: udev 3, busnum 2, minor = 130 >[ 2.378179] usb 2-5: New USB device found, idVendor=05e3, idProduct=0608 >[ 2.378397] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 >[ 2.378622] usb 2-5: Product: USB2.0 Hub >[ 2.378987] usb 2-5: usb_probe_device >[ 2.378989] usb 2-5: configuration #1 chosen from 1 choice >[ 2.379303] usb 2-5: adding 2-5:1.0 (config #1, interface 0) >[ 2.379440] hub 2-5:1.0: usb_probe_interface >[ 2.379442] hub 2-5:1.0: usb_probe_interface - got id >[ 2.379443] hub 2-5:1.0: USB hub found >[ 2.379958] hub 2-5:1.0: 4 ports detected >[ 2.380153] hub 2-5:1.0: standalone hub >[ 2.380154] hub 2-5:1.0: ganged power switching >[ 2.380155] hub 2-5:1.0: global over-current protection >[ 2.380156] hub 2-5:1.0: Single TT >[ 2.380157] hub 2-5:1.0: TT requires at most 32 FS bit times (2664 ns) >[ 2.380158] hub 2-5:1.0: Port indicators are supported >[ 2.380159] hub 2-5:1.0: power on to power good time: 100ms >[ 2.380687] hub 2-5:1.0: local power source is good >[ 2.380689] hub 2-5:1.0: no over-current condition exists >[ 2.380690] hub 2-5:1.0: enabling power on all ports >[ 2.382180] drivers/usb/core/inode.c: creating file '003' >[ 2.382194] hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s >[ 2.432694] ehci_hcd 0000:00:1d.7: port 6 high speed >[ 2.432697] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT >[ 2.454479] usbcore: registered new interface driver snd-usb-audio >[ 2.454693] ALSA device list: >[ 2.454879] #0: HDA Intel at 0xfbff8000 irq 57 >[ 2.455077] #1: HDA NVidia at 0xf9ffc000 irq 17 >[ 2.455302] Netfilter messages via NETLINK v0.30. >[ 2.455523] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) >[ 2.455929] ctnetlink v0.93: registering with nfnetlink. >[ 2.456327] IPv4 over IPv4 tunneling driver >[ 2.456901] ip_tables: (C) 2000-2006 Netfilter Core Team >[ 2.459425] TCP cubic registered >[ 2.459615] Initializing XFRM netlink socket >[ 2.460093] NET: Registered protocol family 10 >[ 2.461340] ip6_tables: (C) 2000-2006 Netfilter Core Team >[ 2.461587] IPv6 over IPv4 tunneling driver >[ 2.462252] NET: Registered protocol family 17 >[ 2.462512] Bluetooth: L2CAP ver 2.15 >[ 2.462706] Bluetooth: L2CAP socket layer initialized >[ 2.462908] Bluetooth: SCO (Voice Link) ver 0.6 >[ 2.463105] Bluetooth: SCO socket layer initialized >[ 2.463340] Bluetooth: RFCOMM socket layer initialized >[ 2.463548] Bluetooth: RFCOMM ver 1.11 >[ 2.463740] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 >[ 2.463943] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 >[ 2.464203] L2TP core driver, V2.0 >[ 2.464403] L2TP debugfs support >[ 2.465035] sctp: Hash tables configured (established 65536 bind 65536) >[ 2.465513] Registering the dns_resolver key type >[ 2.467314] PM: Hibernation image not present or could not be loaded. >[ 2.467326] registered taskstats version 1 >[ 2.467887] Magic number: 6:860:22 >[ 2.481773] hub 2-5:1.0: port 1: status 0301 change 0001 >[ 2.483389] usb 2-6: new high speed USB device using ehci_hcd and address 4 >[ 2.534541] ehci_hcd 0000:00:1d.7: port 6 high speed >[ 2.534544] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT >[ 2.582252] usb 2-5: link qh256-0001/ffff880217634300 start 1 [1/0 us] >[ 2.597492] ehci_hcd 0000:00:1d.7: set dev address 4 for port 6 >[ 2.597497] ehci_hcd 0000:00:1d.7: LPM: no device attached >[ 2.598366] usb 2-6: default language 0x0409 >[ 2.598739] usb 2-6: udev 4, busnum 2, minor = 131 >[ 2.598741] usb 2-6: New USB device found, idVendor=05e3, idProduct=0608 >[ 2.598957] usb 2-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 >[ 2.599181] usb 2-6: Product: USB2.0 Hub >[ 2.599517] usb 2-6: usb_probe_device >[ 2.599520] usb 2-6: configuration #1 chosen from 1 choice >[ 2.599720] usb 2-6: adding 2-6:1.0 (config #1, interface 0) >[ 2.599855] hub 2-6:1.0: usb_probe_interface >[ 2.599857] hub 2-6:1.0: usb_probe_interface - got id >[ 2.599858] hub 2-6:1.0: USB hub found >[ 2.600344] hub 2-6:1.0: 4 ports detected >[ 2.600539] hub 2-6:1.0: standalone hub >[ 2.600540] hub 2-6:1.0: ganged power switching >[ 2.600541] hub 2-6:1.0: global over-current protection >[ 2.600542] hub 2-6:1.0: Single TT >[ 2.600543] hub 2-6:1.0: TT requires at most 32 FS bit times (2664 ns) >[ 2.600544] hub 2-6:1.0: Port indicators are supported >[ 2.600546] hub 2-6:1.0: power on to power good time: 100ms >[ 2.600964] hub 2-6:1.0: local power source is good >[ 2.600966] hub 2-6:1.0: no over-current condition exists >[ 2.600967] hub 2-6:1.0: enabling power on all ports >[ 2.602473] drivers/usb/core/inode.c: creating file '004' >[ 2.602487] hub 10-0:1.0: state 7 ports 4 chg 0000 evt 0000 >[ 2.602489] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 >[ 2.602494] uhci_hcd 0000:00:1a.0: port 2 portsc 01a3,00 >[ 2.602499] hub 3-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s >[ 2.702508] hub 2-6:1.0: port 1: status 0301 change 0001 >[ 2.706049] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 >[ 2.802932] usb 2-6: link qh256-0001/ffff880217634380 start 2 [1/0 us] >[ 2.807911] usb 3-2: new low speed USB device using uhci_hcd and address 2 >[ 2.887777] usb usb4: suspend_rh (auto-stop) >[ 2.887801] usb usb5: suspend_rh (auto-stop) >[ 2.887822] usb usb6: suspend_rh (auto-stop) >[ 2.887843] usb usb9: suspend_rh (auto-stop) >[ 2.887872] usb usb7: suspend_rh (auto-stop) >[ 2.952333] usb 3-2: skipped 1 descriptor after interface >[ 2.952340] usb 3-2: skipped 1 descriptor after interface >[ 2.957323] usb 3-2: default language 0x0409 >[ 2.972302] usb 3-2: udev 2, busnum 3, minor = 257 >[ 2.972307] usb 3-2: New USB device found, idVendor=046d, idProduct=c517 >[ 2.972530] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 >[ 2.972775] usb 3-2: Product: USB Receiver >[ 2.972977] usb 3-2: Manufacturer: Logitech >[ 2.973471] usb 3-2: usb_probe_device >[ 2.973477] usb 3-2: configuration #1 chosen from 1 choice >[ 2.976264] usb 3-2: adding 3-2:1.0 (config #1, interface 0) >[ 2.976557] usbhid 3-2:1.0: usb_probe_interface >[ 2.976562] usbhid 3-2:1.0: usb_probe_interface - got id >[ 2.997941] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2 >[ 2.998323] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us >[ 2.998874] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0 >[ 2.999282] usb 3-2: adding 3-2:1.1 (config #1, interface 1) >[ 2.999453] usbhid 3-2:1.1: usb_probe_interface >[ 2.999458] usbhid 3-2:1.1: usb_probe_interface - got id >[ 3.028227] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor >[ 3.029501] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input3 >[ 3.029878] uhci_hcd 0000:00:1a.0: reserve dev 2 ep82-INT, period 8, phase 4, 118 us >[ 3.030718] usbhid 3-2:1.1: looking for a minor, starting at 96 >[ 3.031296] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input1 >[ 3.031719] drivers/usb/core/inode.c: creating file '002' >[ 3.031747] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 >[ 3.031752] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 >[ 3.031756] hub 2-5:1.0: state 7 ports 4 chg 0002 evt 0000 >[ 3.032128] hub 2-5:1.0: port 1, status 0301, change 0000, 1.5 Mb/s >[ 3.094751] usb 2-5.1: new low speed USB device using ehci_hcd and address 5 >[ 3.106725] hub 2-5:1.0: port 1 not reset yet, waiting 10ms >[ 3.131413] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >[ 3.133084] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB04, max UDMA/100 >[ 3.137397] usb usb8: suspend_rh (auto-stop) >[ 3.160170] scsi 16:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 >[ 3.162047] sd 16:0:0:0: Attached scsi generic sg1 type 0 >[ 3.163060] scsi 16:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 >[ 3.163685] sd 16:0:0:0: [sda] Attached SCSI removable disk >[ 3.164297] sd 16:0:0:1: Attached scsi generic sg2 type 0 >[ 3.165322] scsi 16:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0 >[ 3.166067] sd 16:0:0:1: [sdb] Attached SCSI removable disk >[ 3.166433] sd 16:0:0:2: Attached scsi generic sg3 type 0 >[ 3.167371] scsi 16:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 >[ 3.167994] sd 16:0:0:2: [sdc] Attached SCSI removable disk >[ 3.168266] sd 16:0:0:3: Attached scsi generic sg4 type 0 >[ 3.169602] sd 16:0:0:3: [sdd] Attached SCSI removable disk >[ 3.169970] usb-stor-scan used greatest stack depth: 4648 bytes left >[ 3.183738] usb 2-5.1: skipped 1 descriptor after interface >[ 3.183744] usb 2-5.1: skipped 1 descriptor after interface >[ 3.184306] usb 2-5.1: default language 0x0409 >[ 3.186320] usb 2-5.1: udev 5, busnum 2, minor = 132 >[ 3.186325] usb 2-5.1: New USB device found, idVendor=046d, idProduct=c521 >[ 3.186549] usb 2-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 >[ 3.186898] usb 2-5.1: Product: USB Receiver >[ 3.187100] usb 2-5.1: Manufacturer: Logitech >[ 3.187518] usb 2-5.1: usb_probe_device >[ 3.187523] usb 2-5.1: configuration #1 chosen from 1 choice >[ 3.189323] usb 2-5.1: adding 2-5.1:1.0 (config #1, interface 0) >[ 3.189520] usbhid 2-5.1:1.0: usb_probe_interface >[ 3.189525] usbhid 2-5.1:1.0: usb_probe_interface - got id >[ 3.193035] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.1/2-5.1:1.0/input/input4 >[ 3.194015] generic-usb 0003:046D:C521.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-5.1/input0 >[ 3.194433] usb 2-5.1: adding 2-5.1:1.1 (config #1, interface 1) >[ 3.194629] usbhid 2-5.1:1.1: usb_probe_interface >[ 3.194633] usbhid 2-5.1:1.1: usb_probe_interface - got id >[ 3.201096] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.1/2-5.1:1.1/input/input5 >[ 3.201496] usb 2-5.1: link qh8-0601/ffff880217634780 start 3 [1/2 us] >[ 3.201679] usbhid 2-5.1:1.1: looking for a minor, starting at 96 >[ 3.202040] generic-usb 0003:046D:C521.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.7-5.1/input1 >[ 3.202463] drivers/usb/core/inode.c: creating file '005' >[ 3.202491] hub 2-6:1.0: state 7 ports 4 chg 0002 evt 0000 >[ 3.202845] hub 2-6:1.0: port 1, status 0301, change 0000, 1.5 Mb/s >[ 3.265527] usb 2-6.1: new low speed USB device using ehci_hcd and address 6 >[ 3.388088] usb 2-6.1: skipped 1 descriptor after interface >[ 3.394080] usb 2-6.1: default language 0x0409 >[ 3.438017] usb 2-6.1: udev 6, busnum 2, minor = 133 >[ 3.438022] usb 2-6.1: New USB device found, idVendor=051d, idProduct=0002 >[ 3.438247] usb 2-6.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 >[ 3.438595] usb 2-6.1: Product: Back-UPS CS 650 FW:817.v6.I USB FW:v6 >[ 3.438828] usb 2-6.1: Manufacturer: American Power Conversion >[ 3.439042] usb 2-6.1: SerialNumber: 4B1020P39464 >[ 3.439572] usb 2-6.1: usb_probe_device >[ 3.439579] usb 2-6.1: configuration #1 chosen from 1 choice >[ 3.442992] usb 2-6.1: adding 2-6.1:1.0 (config #1, interface 0) >[ 3.443306] usbhid 2-6.1:1.0: usb_probe_interface >[ 3.443311] usbhid 2-6.1:1.0: usb_probe_interface - got id >[ 3.932647] ata3.00: configured for UDMA/100 >[ 4.733483] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB04 PQ: 0 ANSI: 5 >[ 4.742674] sr1: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray >[ 4.743506] sr 2:0:0:0: Attached scsi CD-ROM sr1 >[ 4.743980] sr 2:0:0:0: Attached scsi generic sg5 type 5 >[ 4.956732] usbhid 2-6.1:1.0: looking for a minor, starting at 96 >[ 4.957431] generic-usb 0003:051D:0002.0005: hiddev0,hidraw4: USB HID v1.10 Device [American Power Conversion Back-UPS CS 650 FW:817.v6.I USB FW:v6] on usb-0000:00:1d.7-6.1/input0 >[ 4.957995] drivers/usb/core/inode.c: creating file '006' >[ 4.958027] hub 2-6:1.0: state 7 ports 4 chg 0000 evt 0002 >[ 5.048099] ata4: SATA link down (SStatus 0 SControl 300) >[ 5.352610] ata5: SATA link down (SStatus 0 SControl 300) >[ 5.657092] ata6: SATA link down (SStatus 0 SControl 300) >[ 5.657560] scsi 6:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5 >[ 5.659056] sd 6:0:0:0: [sde] 1953516911 512-byte logical blocks: (1.00 TB/931 GiB) >[ 5.659376] sd 6:0:0:0: Attached scsi generic sg6 type 0 >[ 5.659703] sd 6:0:0:0: [sde] Write Protect is off >[ 5.659769] scsi 7:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5 >[ 5.660270] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00 >[ 5.660303] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >[ 5.660692] sd 7:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >[ 5.660887] sd 7:0:0:0: Attached scsi generic sg7 type 0 >[ 5.661332] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5 >[ 5.661393] sd 7:0:0:0: [sdf] Write Protect is off >[ 5.661399] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 >[ 5.661452] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >[ 5.662901] scsi 13:0:0:0: Attached scsi generic sg8 type 3 >[ 5.668666] sde: sde1 sde2 >[ 5.668901] sde: p2 size 1171295997 extends beyond EOD, enabling native capacity >[ 5.671043] ata7: hard resetting link >[ 5.730062] sdf: sdf1 sdf2 sdf3 sdf4 < sdf5 sdf6 sdf7 > >[ 5.732114] sd 7:0:0:0: [sdf] Attached SCSI disk >[ 5.977532] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) >[ 5.982093] ata7.00: n_sectors mismatch 1953516911 != 1953525168 >[ 5.982311] ata7.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated >[ 5.985965] ata7.00: configured for UDMA/133 >[ 5.986172] ata7: EH complete >[ 5.986422] sd 6:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >[ 5.987289] sde: detected capacity change from 1000200658432 to 1000204886016 >[ 5.993160] sde: sde1 sde2 >[ 5.994039] sd 6:0:0:0: [sde] Attached SCSI disk >[ 5.994274] md: Waiting for all devices to be available before autodetect >[ 5.994509] md: If you don't use raid, use raid=noautodetect >[ 5.995053] md: Autodetecting RAID arrays. >[ 5.995255] md: Scanned 0 and added 0 devices. >[ 5.995475] md: autorun ... >[ 5.995665] md: ... autorun DONE. >[ 6.000732] EXT4-fs (sdf3): INFO: recovery required on readonly filesystem >[ 6.001049] EXT4-fs (sdf3): write access will be enabled during recovery >[ 6.128696] EXT4-fs (sdf3): recovery complete >[ 6.130098] EXT4-fs (sdf3): mounted filesystem with ordered data mode. Opts: (null) >[ 6.130557] VFS: Mounted root (ext4 filesystem) readonly on device 8:83. >[ 6.130878] Freeing unused kernel memory: 632k freed >[ 6.131186] Write protecting the kernel read-only data: 14336k >[ 6.131811] Freeing unused kernel memory: 676k freed >[ 6.132330] Freeing unused kernel memory: 708k freed >[ 6.477292] stty used greatest stack depth: 4376 bytes left >[ 7.043403] udev: starting version 151 >[ 7.043478] udevd (1662): /proc/1662/oom_adj is deprecated, please use /proc/1662/oom_score_adj instead. >[ 7.073067] test_power_get_battery_property: some properties deliberately report errors. >[ 7.073071] power_supply test_battery: driver failed to report `charge_full' property >[ 7.180696] nvidia: module license 'NVIDIA' taints kernel. >[ 7.180699] Disabling lock debugging due to kernel taint >[ 7.185775] pci-db used greatest stack depth: 3768 bytes left >[ 7.191946] udev: renamed network interface eth1 to eth3 >[ 7.196855] udev: renamed network interface eth0 to eth2 >[ 7.267352] usb 2-5.1: link qh8-0601/ffff880213b8de00 start 4 [1/2 us] >[ 7.294297] usb 2-5.1: unlink qh8-0601/ffff880213b8de00 start 4 [1/2 us] >[ 7.497817] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >[ 7.497823] nvidia 0000:01:00.0: setting latency timer to 64 >[ 7.497829] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem >[ 7.498014] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.21 Thu Nov 4 21:16:27 PDT 2010 >[ 8.113100] EXT4-fs (sdf3): re-mounted. Opts: (null) >[ 8.223271] it87: Found IT8720F chip at 0x290, revision 8 >[ 8.223282] it87: VID is disabled (pins used for GPIO) >[ 8.223296] it87: Routing internal VCCH to in7 >[ 8.223302] it87: Beeping is supported >[ 20.566141] EXT4-fs (sdf5): mounted filesystem with ordered data mode. Opts: (null) >[ 20.599419] EXT4-fs (sdf6): mounted filesystem with ordered data mode. Opts: (null) >[ 20.629457] EXT4-fs (sdf7): mounted filesystem with ordered data mode. Opts: (null) >[ 25.362099] r8169 0000:03:00.0: eth2: link up >[ 25.362107] r8169 0000:03:00.0: eth2: link up >[ 29.257521] r8169 0000:04:00.0: eth3: link up >[ 29.257530] r8169 0000:04:00.0: eth3: link up >[ 36.249197] eth2: no IPv6 routers present >[ 39.939751] eth3: no IPv6 routers present >[ 41.549751] test_power_get_battery_property: some properties deliberately report errors. >[ 41.549754] power_supply test_battery: driver failed to report `charge_full' property >[ 41.739606] usb 2-6.1: link qh64-0601/ffff880217634b80 start 5 [1/2 us] >[ 46.835864] ehci_hcd 0000:00:1d.7: reused qh ffff880213b8de00 schedule >[ 46.835872] usb 2-5.1: link qh8-0601/ffff880213b8de00 start 4 [1/2 us] >[ 55.118368] test_power_get_battery_property: some properties deliberately report errors. >[ 55.118371] power_supply test_battery: driver failed to report `charge_full' property >[ 57.424407] EXT4-fs (sdf3): re-mounted. Opts: commit=0 >[ 58.195772] EXT4-fs (sdf5): re-mounted. Opts: commit=0 >[ 58.244298] EXT4-fs (sdf6): re-mounted. Opts: commit=0 >[ 59.010855] EXT4-fs (sdf7): re-mounted. Opts: commit=0 >[ 66.241861] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. >[ 114.910743] usb 2-5.1: unlink qh8-0601/ffff880213b8de00 start 4 [1/2 us] >[ 115.155861] test_power_get_battery_property: some properties deliberately report errors. >[ 115.155864] power_supply test_battery: driver failed to report `charge_full' property >[ 131.311848] ehci_hcd 0000:00:1d.7: reused qh ffff880213b8de00 schedule >[ 131.311855] usb 2-5.1: link qh8-0601/ffff880213b8de00 start 4 [1/2 us] >[ 137.633803] test_power_get_battery_property: some properties deliberately report errors. >[ 137.633806] power_supply test_battery: driver failed to report `charge_full' property >[ 149.789310] usb 2-5.1: unlink qh8-0601/ffff880213b8de00 start 4 [1/2 us] >[ 173.400561] ehci_hcd 0000:00:1d.7: reused qh ffff880213b8de00 schedule >[ 173.400569] usb 2-5.1: link qh8-0601/ffff880213b8de00 start 4 [1/2 us] >[ 179.958430] test_power_get_battery_property: some properties deliberately report errors. >[ 179.958433] power_supply test_battery: driver failed to report `charge_full' property >[ 2848.340863] EXT4-fs (sdf3): re-mounted. Opts: commit=0 >[ 2848.419165] EXT4-fs (sdf5): re-mounted. Opts: commit=0 >[ 2848.429577] EXT4-fs (sdf6): re-mounted. Opts: commit=0 >[ 2848.505924] EXT4-fs (sdf7): re-mounted. Opts: commit=0 >[ 2848.846998] usb 2-5.1: unlink qh8-0601/ffff880213b8de00 start 4 [1/2 us] >[ 2849.263918] PM: Syncing filesystems ... done. >[ 2849.265114] PM: Preparing system for mem sleep >[ 2849.265119] Freezing user space processes ... (elapsed 0.01 seconds) done. >[ 2849.277326] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. >[ 2849.288323] PM: Entering mem sleep >[ 2849.288363] Suspending console(s) (use no_console_suspend to debug) >[ 2849.288586] sd 7:0:0:0: [sdf] Synchronizing SCSI cache >[ 2849.288955] sd 6:0:0:0: [sde] Synchronizing SCSI cache >[ 2849.289134] sd 6:0:0:0: [sde] Stopping disk >[ 2849.289326] usb 2-6.1: unlink qh64-0601/ffff880217634b80 start 5 [1/2 us] >[ 2849.289354] usb 2-5.1: unlink qh8-0601/ffff880217634780 start 3 [1/2 us] >[ 2849.289451] hub 2-6:1.0: hub_suspend >[ 2849.289459] usb 2-6: unlink qh256-0001/ffff880217634380 start 2 [1/0 us] >[ 2849.289526] hub 2-5:1.0: hub_suspend >[ 2849.289530] usb 2-5: unlink qh256-0001/ffff880217634300 start 1 [1/0 us] >[ 2849.289562] hub 10-0:1.0: hub_suspend >[ 2849.289568] usb usb10: bus suspend >[ 2849.289587] hub 9-0:1.0: hub_suspend >[ 2849.289590] usb usb9: bus suspend >[ 2849.289592] usb usb9: suspend_rh >[ 2849.289595] hub 8-0:1.0: hub_suspend >[ 2849.289599] usb usb8: bus suspend >[ 2849.289601] usb usb8: suspend_rh >[ 2849.289607] hub 7-0:1.0: hub_suspend >[ 2849.289612] usb usb7: bus suspend >[ 2849.289613] usb usb7: suspend_rh >[ 2849.289618] hub 6-0:1.0: hub_suspend >[ 2849.289622] hub 5-0:1.0: hub_suspend >[ 2849.289624] usb usb6: bus suspend >[ 2849.289625] usb usb6: suspend_rh >[ 2849.289627] usb usb5: bus suspend >[ 2849.289629] hub 4-0:1.0: hub_suspend >[ 2849.289630] usb usb5: suspend_rh >[ 2849.289633] usb usb4: bus suspend >[ 2849.289635] usb usb4: suspend_rh >[ 2849.289647] hub 2-0:1.0: hub_suspend >[ 2849.289651] usb usb2: bus suspend >[ 2849.289652] hub 1-0:1.0: hub_suspend >[ 2849.289654] ehci_hcd 0000:00:1d.7: suspend root hub >[ 2849.289655] usb usb1: bus suspend >[ 2849.289657] ehci_hcd 0000:00:1a.7: suspend root hub >[ 2849.290792] uhci_hcd 0000:00:1a.0: release dev 2 ep82-INT, period 8, phase 4, 118 us >[ 2849.291758] uhci_hcd 0000:00:1a.0: release dev 2 ep81-INT, period 8, phase 4, 118 us >[ 2849.291826] hub 3-0:1.0: hub_suspend >[ 2849.291835] usb usb3: bus suspend >[ 2849.291838] usb usb3: suspend_rh >[ 2849.299567] serial 00:07: disabled >[ 2849.299582] serial 00:07: wake-up capability disabled by ACPI >[ 2849.299695] ACPI handle has no context! >[ 2849.299731] rt2800pci 0000:07:02.0: PCI INT A disabled >[ 2849.299739] ACPI handle has no context! >[ 2849.299909] ahci 0000:06:00.0: PCI INT A disabled >[ 2849.300388] ehci_hcd 0000:00:1d.7: PCI INT A disabled >[ 2849.300393] uhci_hcd 0000:00:1d.3: uhci_pci_suspend >[ 2849.300404] uhci_hcd 0000:00:1d.3: PCI INT D disabled >[ 2849.300407] uhci_hcd 0000:00:1d.2: uhci_pci_suspend >[ 2849.300419] uhci_hcd 0000:00:1d.2: PCI INT C disabled >[ 2849.300422] uhci_hcd 0000:00:1d.1: uhci_pci_suspend >[ 2849.300433] uhci_hcd 0000:00:1d.1: PCI INT B disabled >[ 2849.300436] uhci_hcd 0000:00:1d.0: uhci_pci_suspend >[ 2849.300447] uhci_hcd 0000:00:1d.0: PCI INT A disabled >[ 2849.300537] ehci_hcd 0000:00:1a.7: PCI INT C disabled >[ 2849.300542] uhci_hcd 0000:00:1a.2: uhci_pci_suspend >[ 2849.300551] uhci_hcd 0000:00:1a.1: uhci_pci_suspend >[ 2849.300553] uhci_hcd 0000:00:1a.2: PCI INT C disabled >[ 2849.300561] uhci_hcd 0000:00:1a.0: uhci_pci_suspend >[ 2849.300563] uhci_hcd 0000:00:1a.1: PCI INT B disabled >[ 2849.300569] uhci_hcd 0000:00:1a.0: PCI INT A disabled >[ 2849.312065] xhci_hcd 0000:05:00.0: PCI INT A disabled >[ 2849.322709] sd 7:0:0:0: [sdf] Stopping disk >[ 2849.401115] HDA Intel 0000:00:1b.0: PCI INT A disabled >[ 2849.714580] HDA Intel 0000:01:00.1: PCI INT B disabled >[ 2849.714606] ACPI handle has no context! >[ 2850.294964] PM: suspend of devices complete after 1008.023 msecs >[ 2850.295211] xhci_hcd 0000:05:00.0: wakeup: 0 >[ 2850.305835] xhci_hcd 0000:05:00.0: --> PCI D3hot >[ 2850.305906] r8169 0000:04:00.0: PME# enabled >[ 2850.305913] pci 0000:00:1c.1: wake-up capability enabled by ACPI >[ 2850.316827] r8169 0000:03:00.0: PME# enabled >[ 2850.316840] pci 0000:00:1c.0: wake-up capability enabled by ACPI >[ 2850.327868] ehci_hcd 0000:00:1d.7: wakeup: 0 >[ 2850.338715] ehci_hcd 0000:00:1d.7: --> PCI D3hot >[ 2850.338747] uhci_hcd 0000:00:1d.3: wakeup: 0 >[ 2850.338752] uhci_hcd 0000:00:1d.3: --> PCI D0 >[ 2850.338780] uhci_hcd 0000:00:1d.2: wakeup: 0 >[ 2850.338784] uhci_hcd 0000:00:1d.2: --> PCI D0 >[ 2850.338811] uhci_hcd 0000:00:1d.1: wakeup: 0 >[ 2850.338815] uhci_hcd 0000:00:1d.1: --> PCI D0 >[ 2850.338844] uhci_hcd 0000:00:1d.0: wakeup: 0 >[ 2850.338845] uhci_hcd 0000:00:1d.0: --> PCI D0 >[ 2850.338973] ehci_hcd 0000:00:1a.7: wakeup: 0 >[ 2850.349697] ehci_hcd 0000:00:1a.7: --> PCI D3hot >[ 2850.349729] uhci_hcd 0000:00:1a.2: wakeup: 0 >[ 2850.349734] uhci_hcd 0000:00:1a.2: --> PCI D0 >[ 2850.349762] uhci_hcd 0000:00:1a.1: wakeup: 0 >[ 2850.349766] uhci_hcd 0000:00:1a.1: --> PCI D0 >[ 2850.349794] uhci_hcd 0000:00:1a.0: wakeup: 0 >[ 2850.349797] uhci_hcd 0000:00:1a.0: --> PCI D0 >[ 2850.349935] PM: late suspend of devices complete after 55.049 msecs >[ 2850.350155] ACPI: Preparing to enter system sleep state S3 >[ 2850.351304] PM: Saving platform NVS memory >[ 2850.352947] Disabling non-boot CPUs ... >[ 2850.365905] Broke affinity for irq 41 >[ 2850.366948] CPU 1 is now offline >[ 2850.397697] Broke affinity for irq 42 >[ 2850.398731] CPU 2 is now offline >[ 2850.413708] Broke affinity for irq 43 >[ 2850.414750] CPU 3 is now offline >[ 2850.429782] Broke affinity for irq 44 >[ 2850.430806] CPU 4 is now offline >[ 2850.446773] CPU 5 is now offline >[ 2850.462646] CPU 6 is now offline >[ 2850.472584] CPU 7 is now offline >[ 2850.472586] SMP alternatives: switching to UP code >[ 2850.476662] Back to C! >[ 2850.476664] PM: Restoring platform NVS memory >[ 2850.478094] Enabling non-boot CPUs ... >[ 2850.480211] SMP alternatives: switching to SMP code >[ 2850.484151] Booting Node 0 Processor 1 APIC 0x2 >[ 2850.588014] hpet: hpet3 irq 41 for MSI >[ 2850.588030] CPU1 is up >[ 2850.588140] Booting Node 0 Processor 2 APIC 0x4 >[ 2850.691852] hpet: hpet4 irq 42 for MSI >[ 2850.691869] CPU2 is up >[ 2850.692014] Booting Node 0 Processor 3 APIC 0x6 >[ 2850.795058] hpet: hpet5 irq 43 for MSI >[ 2850.795091] CPU3 is up >[ 2850.795158] Booting Node 0 Processor 4 APIC 0x1 >[ 2850.897890] hpet: hpet6 irq 44 for MSI >[ 2850.897899] CPU4 is up >[ 2850.897965] Booting Node 0 Processor 5 APIC 0x3 >[ 2851.000877] CPU5 is up >[ 2851.001125] Booting Node 0 Processor 6 APIC 0x5 >[ 2851.104263] CPU6 is up >[ 2851.104595] Booting Node 0 Processor 7 APIC 0x7 >[ 2851.207788] CPU7 is up >[ 2851.210306] ACPI: Waking up from system sleep state S3 >[ 2851.210441] pci 0000:00:00.0: restoring config space at offset 0xf (was 0x0, writing 0xff) >[ 2851.210450] pci 0000:00:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) >[ 2851.210511] pci 0000:00:08.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) >[ 2851.210529] pci 0000:00:08.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) >[ 2851.210547] pci 0000:00:08.2: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) >[ 2851.210559] pci 0000:00:08.3: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) >[ 2851.210571] pci 0000:00:10.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) >[ 2851.210582] pci 0000:00:10.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) >[ 2851.210691] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) >[ 2851.210701] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xfbff8004) >[ 2851.210704] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) >[ 2851.210708] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) >[ 2851.211017] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0xf001, writing 0xf401) >[ 2851.211064] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) >[ 2851.211070] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xcf01) >[ 2851.211073] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0xc, writing 0xec00000c) >[ 2851.211077] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xe000000c) >[ 2851.211080] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6000000) >[ 2851.211084] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) >[ 2851.211111] HDA Intel 0000:01:00.1: restoring config space at offset 0xf (was 0x200, writing 0x205) >[ 2851.211121] HDA Intel 0000:01:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xf9ffc000) >[ 2851.211123] HDA Intel 0000:01:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) >[ 2851.211127] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) >[ 2851.211156] ahci 0000:02:00.0: restoring config space at offset 0xc (was 0xd0000000, writing 0x0) >[ 2851.211165] ahci 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) >[ 2851.211168] ahci 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) >[ 2851.211206] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) >[ 2851.211218] r8169 0000:03:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfb7f800c) >[ 2851.211224] r8169 0000:03:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfb7ff00c) >[ 2851.211229] r8169 0000:03:00.0: restoring config space at offset 0x4 (was 0xfc01, writing 0xbe01) >[ 2851.211233] r8169 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) >[ 2851.211238] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) >[ 2851.211294] r8169 0000:04:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105) >[ 2851.211306] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfbdf800c) >[ 2851.211311] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfbdff00c) >[ 2851.211317] r8169 0000:04:00.0: restoring config space at offset 0x4 (was 0xfc01, writing 0xae01) >[ 2851.211321] r8169 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) >[ 2851.211326] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) >[ 2851.211390] xhci_hcd 0000:05:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) >[ 2851.211411] xhci_hcd 0000:05:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfbcfe004) >[ 2851.211416] xhci_hcd 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) >[ 2851.211422] xhci_hcd 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) >[ 2851.211459] ahci 0000:06:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a) >[ 2851.211473] ahci 0000:06:00.0: restoring config space at offset 0x8 (was 0xeb01, writing 0x0) >[ 2851.211477] ahci 0000:06:00.0: restoring config space at offset 0x7 (was 0xec01, writing 0x0) >[ 2851.211481] ahci 0000:06:00.0: restoring config space at offset 0x6 (was 0xed01, writing 0x0) >[ 2851.211486] ahci 0000:06:00.0: restoring config space at offset 0x5 (was 0xee01, writing 0x0) >[ 2851.211490] ahci 0000:06:00.0: restoring config space at offset 0x4 (was 0xef01, writing 0x0) >[ 2851.211494] ahci 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x800010) >[ 2851.211542] pci 0000:06:00.1: restoring config space at offset 0x8 (was 0x1, writing 0xeb01) >[ 2851.211546] pci 0000:06:00.1: restoring config space at offset 0x7 (was 0x1, writing 0xec01) >[ 2851.211550] pci 0000:06:00.1: restoring config space at offset 0x6 (was 0x1, writing 0xed01) >[ 2851.211555] pci 0000:06:00.1: restoring config space at offset 0x5 (was 0x1, writing 0xee01) >[ 2851.211559] pci 0000:06:00.1: restoring config space at offset 0x4 (was 0x1, writing 0xef01) >[ 2851.211581] rt2800pci 0000:07:02.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010a) >[ 2851.211595] rt2800pci 0000:07:02.0: restoring config space at offset 0x4 (was 0xffff0000, writing 0xfb9e0000) >[ 2851.211598] rt2800pci 0000:07:02.0: restoring config space at offset 0x3 (was 0x0, writing 0x2010) >[ 2851.211602] rt2800pci 0000:07:02.0: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100016) >[ 2851.211617] firewire_ohci 0000:07:06.0: restoring config space at offset 0xf (was 0x4020100, writing 0x4020105) >[ 2851.211629] firewire_ohci 0000:07:06.0: restoring config space at offset 0x5 (was 0x0, writing 0xfb9f8000) >[ 2851.211633] firewire_ohci 0000:07:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xfb9ff000) >[ 2851.211636] firewire_ohci 0000:07:06.0: restoring config space at offset 0x3 (was 0x0, writing 0x2010) >[ 2851.211641] firewire_ohci 0000:07:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) >[ 2851.211654] pci 0000:07:07.0: restoring config space at offset 0xf (was 0x8080100, writing 0x808010b) >[ 2851.211663] pci 0000:07:07.0: restoring config space at offset 0x8 (was 0x1, writing 0x9b01) >[ 2851.211666] pci 0000:07:07.0: restoring config space at offset 0x7 (was 0x1, writing 0x9c01) >[ 2851.211670] pci 0000:07:07.0: restoring config space at offset 0x6 (was 0x1, writing 0x9d01) >[ 2851.211673] pci 0000:07:07.0: restoring config space at offset 0x5 (was 0x1, writing 0x9e01) >[ 2851.211676] pci 0000:07:07.0: restoring config space at offset 0x4 (was 0x1, writing 0x9f01) >[ 2851.211679] pci 0000:07:07.0: restoring config space at offset 0x3 (was 0x2000, writing 0x0) >[ 2851.211683] pci 0000:07:07.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100005) >[ 2851.211741] PM: early resume of devices complete after 1.315 msecs >[ 2851.211850] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >[ 2851.211852] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >[ 2851.211854] pci 0000:00:03.0: setting latency timer to 64 >[ 2851.211855] pci 0000:00:05.0: setting latency timer to 64 >[ 2851.211882] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 >[ 2851.211888] uhci_hcd 0000:00:1a.1: setting latency timer to 64 >[ 2851.211891] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >[ 2851.211893] uhci_hcd 0000:00:1a.1: uhci_pci_resume >[ 2851.211897] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000 >[ 2851.211899] uhci_hcd 0000:00:1a.0: setting latency timer to 64 >[ 2851.211900] uhci_hcd 0000:00:1a.1: Performing full reset >[ 2851.211901] uhci_hcd 0000:00:1a.0: uhci_pci_resume >[ 2851.211905] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2000 >[ 2851.211907] uhci_hcd 0000:00:1a.0: Performing full reset >[ 2851.211911] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >[ 2851.211916] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >[ 2851.211921] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >[ 2851.211924] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 >[ 2851.211926] uhci_hcd 0000:00:1a.2: setting latency timer to 64 >[ 2851.211929] usb usb4: root hub lost power or was reset >[ 2851.211932] ehci_hcd 0000:00:1a.7: setting latency timer to 64 >[ 2851.211935] pci 0000:00:1c.0: setting latency timer to 64 >[ 2851.211938] uhci_hcd 0000:00:1a.2: uhci_pci_resume >[ 2851.211941] usb usb3: root hub lost power or was reset >[ 2851.211945] HDA Intel 0000:00:1b.0: setting latency timer to 64 >[ 2851.211948] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x2000 >[ 2851.211951] uhci_hcd 0000:00:1a.2: Performing full reset >[ 2851.211954] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >[ 2851.211960] pci 0000:00:1c.2: setting latency timer to 64 >[ 2851.211969] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >[ 2851.211972] usb usb5: root hub lost power or was reset >[ 2851.211977] pci 0000:00:1c.1: setting latency timer to 64 >[ 2851.211986] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >[ 2851.212000] HDA Intel 0000:01:00.1: setting latency timer to 64 >[ 2851.212003] ahci 0000:02:00.0: setting latency timer to 64 >[ 2851.212006] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 >[ 2851.212009] usb usb1: root hub lost power or was reset >[ 2851.212015] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X >[ 2851.212018] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT >[ 2851.212020] xhci_hcd 0000:05:00.0: setting latency timer to 64 >[ 2851.215900] usb usb10: root hub lost power or was reset >[ 2851.215907] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported >[ 2851.215982] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >[ 2851.215990] pci 0000:00:1c.6: setting latency timer to 64 >[ 2851.216031] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 >[ 2851.216038] uhci_hcd 0000:00:1d.0: setting latency timer to 64 >[ 2851.216041] uhci_hcd 0000:00:1d.0: uhci_pci_resume >[ 2851.216044] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000 >[ 2851.216045] uhci_hcd 0000:00:1d.0: Performing full reset >[ 2851.216074] usb usb6: root hub lost power or was reset >[ 2851.216079] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 >[ 2851.216108] uhci_hcd 0000:00:1d.1: setting latency timer to 64 >[ 2851.216111] uhci_hcd 0000:00:1d.1: uhci_pci_resume >[ 2851.216114] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 >[ 2851.216148] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X >[ 2851.216152] uhci_hcd 0000:00:1d.1: Performing full reset >[ 2851.216157] xhci_hcd 0000:05:00.0: irq 51 for MSI/MSI-X >[ 2851.216159] xhci_hcd 0000:05:00.0: irq 52 for MSI/MSI-X >[ 2851.216162] xhci_hcd 0000:05:00.0: irq 53 for MSI/MSI-X >[ 2851.216165] xhci_hcd 0000:05:00.0: irq 54 for MSI/MSI-X >[ 2851.216167] xhci_hcd 0000:05:00.0: irq 55 for MSI/MSI-X >[ 2851.216170] xhci_hcd 0000:05:00.0: irq 56 for MSI/MSI-X >[ 2851.216172] xhci_hcd 0000:05:00.0: irq 57 for MSI/MSI-X >[ 2851.216183] usb usb7: root hub lost power or was reset >[ 2851.216205] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 >[ 2851.216217] uhci_hcd 0000:00:1d.3: setting latency timer to 64 >[ 2851.216222] uhci_hcd 0000:00:1d.3: uhci_pci_resume >[ 2851.216227] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000 >[ 2851.216228] uhci_hcd 0000:00:1d.3: Performing full reset >[ 2851.216252] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >[ 2851.216265] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 >[ 2851.216267] usb usb9: root hub lost power or was reset >[ 2851.216269] uhci_hcd 0000:00:1d.2: setting latency timer to 64 >[ 2851.216273] ehci_hcd 0000:00:1d.7: setting latency timer to 64 >[ 2851.216275] uhci_hcd 0000:00:1d.2: uhci_pci_resume >[ 2851.216281] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 >[ 2851.216282] uhci_hcd 0000:00:1d.2: Performing full reset >[ 2851.216304] pci 0000:00:1e.0: setting latency timer to 64 >[ 2851.216309] usb usb8: root hub lost power or was reset >[ 2851.216322] rt2800pci 0000:07:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 >[ 2851.216340] usb usb2: root hub lost power or was reset >[ 2851.216345] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT >[ 2851.220235] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported >[ 2851.220244] pci 0000:00:1c.0: wake-up capability disabled by ACPI >[ 2851.220249] r8169 0000:03:00.0: PME# disabled >[ 2851.220263] ahci 0000:00:1f.2: setting latency timer to 64 >[ 2851.220309] ahci 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 >[ 2851.220320] pci 0000:00:1c.1: wake-up capability disabled by ACPI >[ 2851.220327] ahci 0000:06:00.0: setting latency timer to 64 >[ 2851.220331] r8169 0000:04:00.0: PME# disabled >[ 2851.221263] serial 00:07: activated >[ 2851.223066] usb usb1: usb resume >[ 2851.223069] ehci_hcd 0000:00:1a.7: resume root hub after power loss >[ 2851.223074] usb usb2: usb resume >[ 2851.223078] ehci_hcd 0000:00:1d.7: resume root hub after power loss >[ 2851.223086] usb usb3: usb resume >[ 2851.223088] usb usb3: wakeup_rh >[ 2851.223143] usb usb4: usb resume >[ 2851.223145] usb usb4: wakeup_rh >[ 2851.223186] usb usb5: usb resume >[ 2851.223188] usb usb5: wakeup_rh >[ 2851.223220] usb usb6: usb resume >[ 2851.223222] usb usb6: wakeup_rh >[ 2851.223252] usb usb7: usb resume >[ 2851.223255] usb usb7: wakeup_rh >[ 2851.223296] usb usb8: usb resume >[ 2851.223299] usb usb8: wakeup_rh >[ 2851.223326] usb usb9: usb resume >[ 2851.223328] usb usb9: wakeup_rh >[ 2851.223360] usb usb10: usb resume >[ 2851.223867] sd 6:0:0:0: [sde] Starting disk >[ 2851.223911] sd 7:0:0:0: [sdf] Starting disk >[ 2851.233969] hub 5-0:1.0: hub_reset_resume >[ 2851.233973] hub 3-0:1.0: hub_reset_resume >[ 2851.233976] hub 7-0:1.0: hub_reset_resume >[ 2851.233978] hub 5-0:1.0: trying to enable port power on non-switchable hub >[ 2851.233982] hub 3-0:1.0: trying to enable port power on non-switchable hub >[ 2851.233985] hub 7-0:1.0: trying to enable port power on non-switchable hub >[ 2851.233990] hub 4-0:1.0: hub_reset_resume >[ 2851.233993] hub 6-0:1.0: hub_reset_resume >[ 2851.233996] hub 9-0:1.0: hub_reset_resume >[ 2851.233999] hub 4-0:1.0: trying to enable port power on non-switchable hub >[ 2851.234003] hub 8-0:1.0: hub_reset_resume >[ 2851.234005] hub 6-0:1.0: trying to enable port power on non-switchable hub >[ 2851.234009] hub 9-0:1.0: trying to enable port power on non-switchable hub >[ 2851.234012] hub 8-0:1.0: trying to enable port power on non-switchable hub >[ 2851.234018] hub 10-0:1.0: hub_reset_resume >[ 2851.234020] hub 10-0:1.0: enabling power on all ports >[ 2851.242953] hub 2-0:1.0: hub_reset_resume >[ 2851.242956] hub 2-0:1.0: trying to enable port power on non-switchable hub >[ 2851.252946] ehci_hcd 0000:00:1a.7: port 2 low speed --> companion >[ 2851.266983] firewire_core: skipped bus generations, destroying all nodes >[ 2851.271928] r8169 0000:03:00.0: eth2: link down >[ 2851.271952] r8169 0000:04:00.0: eth3: link down >[ 2851.334856] uhci_hcd 0000:00:1d.2: port 1 portsc 0082,00 >[ 2851.334867] uhci_hcd 0000:00:1d.2: port 2 portsc 0082,00 >[ 2851.334872] uhci_hcd 0000:00:1a.0: port 2 portsc 01ab,00 >[ 2851.334877] hub 3-0:1.0: port 2: status 0301 change 0003 >[ 2851.334882] uhci_hcd 0000:00:1d.1: port 1 portsc 0082,00 >[ 2851.343893] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC >[ 2851.343942] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT >[ 2851.343945] hub 2-0:1.0: port 3: status 0501 change 0001 >[ 2851.343955] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001803 0 ACK POWER sig=j CSC CONNECT >[ 2851.343957] hub 2-0:1.0: port 5: status 0501 change 0001 >[ 2851.343963] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT >[ 2851.343965] hub 2-0:1.0: port 6: status 0501 change 0001 >[ 2851.354831] hub 1-0:1.0: hub_reset_resume >[ 2851.354833] hub 1-0:1.0: trying to enable port power on non-switchable hub >[ 2851.444782] usb 2-5: reset-resume >[ 2851.444817] usb 2-3: reset-resume >[ 2851.444825] usb 2-6: reset-resume >[ 2851.455808] usb 3-2: reset-resume >[ 2851.495888] ehci_hcd 0000:00:1d.7: port 5 high speed >[ 2851.495891] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT >[ 2851.535557] ata1: SATA link down (SStatus 0 SControl 300) >[ 2851.536653] ata15: SATA link down (SStatus 0 SControl 300) >[ 2851.536688] ata16: SATA link down (SStatus 0 SControl 300) >[ 2851.538655] ata4: SATA link down (SStatus 0 SControl 300) >[ 2851.540626] ata6: SATA link down (SStatus 0 SControl 300) >[ 2851.544575] ata5: SATA link down (SStatus 0 SControl 300) >[ 2851.546657] usb 2-5: reset high speed USB device using ehci_hcd and address 3 >[ 2851.597733] ehci_hcd 0000:00:1d.7: port 5 high speed >[ 2851.597736] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT >[ 2851.660688] ehci_hcd 0000:00:1d.7: set dev address 3 for port 5 >[ 2851.660695] ehci_hcd 0000:00:1d.7: LPM: no device attached >[ 2851.661474] hub 2-5:1.0: hub_reset_resume >[ 2851.661478] hub 2-5:1.0: enabling power on all ports >[ 2851.697343] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >[ 2851.699336] ata3.00: configured for UDMA/100 >[ 2851.701400] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >[ 2851.705056] ata2.00: configured for UDMA/100 >[ 2851.711561] ehci_hcd 0000:00:1d.7: port 3 high speed >[ 2851.711563] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT >[ 2851.762308] usb 2-3: reset high speed USB device using ehci_hcd and address 2 >[ 2851.763571] hub 2-5:1.0: port 1: status 0301 change 0001 >[ 2851.767233] firewire_core: rediscovered device fw0 >[ 2851.813405] ehci_hcd 0000:00:1d.7: port 3 high speed >[ 2851.813407] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT >[ 2851.865049] usb 2-5: link qh256-0001/ffff8802162f9600 start 6 [1/0 us] >[ 2851.865384] usb 2-5.1: reset-resume >[ 2851.876400] ehci_hcd 0000:00:1d.7: set dev address 2 for port 3 >[ 2851.876406] ehci_hcd 0000:00:1d.7: LPM: no device attached >[ 2851.927233] ehci_hcd 0000:00:1d.7: port 6 high speed >[ 2851.927236] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT >[ 2851.977871] usb 2-6: reset high speed USB device using ehci_hcd and address 4 >[ 2852.029077] ehci_hcd 0000:00:1d.7: port 6 high speed >[ 2852.029080] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT >[ 2852.092071] ehci_hcd 0000:00:1d.7: set dev address 4 for port 6 >[ 2852.092077] ehci_hcd 0000:00:1d.7: LPM: no device attached >[ 2852.092822] hub 2-6:1.0: hub_reset_resume >[ 2852.092827] hub 2-6:1.0: enabling power on all ports >[ 2852.194914] hub 2-6:1.0: port 1: status 0301 change 0001 >[ 2852.296422] usb 2-6: link qh256-0001/ffff880217634380 start 7 [1/0 us] >[ 2852.296726] usb 2-6.1: reset-resume >[ 2852.343309] usb 3-2: reset low speed USB device using uhci_hcd and address 2 >[ 2852.382368] usb usb9: suspend_rh (auto-stop) >[ 2852.382374] usb usb4: suspend_rh (auto-stop) >[ 2852.382382] usb usb5: suspend_rh (auto-stop) >[ 2852.382389] usb usb7: suspend_rh (auto-stop) >[ 2852.382411] usb usb8: suspend_rh (auto-stop) >[ 2852.382417] usb usb6: suspend_rh (auto-stop) >[ 2852.637047] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us >[ 2852.639047] uhci_hcd 0000:00:1a.0: reserve dev 2 ep82-INT, period 8, phase 4, 118 us >[ 2852.872891] usb 2-5.1: reset low speed USB device using ehci_hcd and address 5 >[ 2853.142214] usb 2-5.1: link qh8-0601/ffff880217634780 start 0 [1/2 us] >[ 2853.390109] usb 2-6.1: reset low speed USB device using ehci_hcd and address 6 >[ 2853.732101] usb 2-6.1: link qh64-0601/ffff880217634b80 start 9 [1/2 us] >[ 2854.019968] r8169 0000:03:00.0: eth2: link up >[ 2854.050102] r8169 0000:04:00.0: eth3: link up >[ 2856.568900] ata14: link is slow to respond, please be patient (ready=0) >[ 2856.568908] ata8: link is slow to respond, please be patient (ready=0) >[ 2856.568915] ata12: link is slow to respond, please be patient (ready=0) >[ 2856.568920] ata13: link is slow to respond, please be patient (ready=0) >[ 2856.568925] ata11: link is slow to respond, please be patient (ready=0) >[ 2856.568930] ata10: link is slow to respond, please be patient (ready=0) >[ 2856.568936] ata9: link is slow to respond, please be patient (ready=0) >[ 2856.570865] ata7: link is slow to respond, please be patient (ready=0) >[ 2858.300247] ata14: SATA link up <unknown> (SStatus FFFFFF93 SControl 300) >[ 2858.300268] ata11: SATA link down (SStatus 0 SControl 300) >[ 2858.300289] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) >[ 2858.300318] ata10: SATA link down (SStatus 0 SControl 300) >[ 2858.300342] ata13: SATA link down (SStatus 0 SControl 300) >[ 2858.300356] ata12: SATA link down (SStatus 0 SControl 300) >[ 2858.300374] ata9: SATA link down (SStatus 0 SControl 300) >[ 2858.300650] ata14.00: configured for UDMA/66 >[ 2858.302254] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) >[ 2858.325409] ata8.00: configured for UDMA/133 >[ 2858.327944] ata7.00: configured for UDMA/133 >[ 2858.328244] PM: resume of devices complete after 7127.444 msecs >[ 2858.328464] PM: Finishing wakeup. >[ 2858.328466] Restarting tasks ... >[ 2858.328554] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 >[ 2858.328558] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 >[ 2858.328561] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 >[ 2858.328564] hub 10-0:1.0: state 7 ports 4 chg 0000 evt 0000 >[ 2858.328567] hub 9-0:1.0: state 7 ports 2 chg 0000 evt 0000 >[ 2858.328570] hub 3-0:1.0: state 7 ports 2 chg 0004 evt 0004 >[ 2858.328579] hub 3-0:1.0: port 2, status 0303, change 0000, 1.5 Mb/s >[ 2858.328583] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 >[ 2858.328587] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 >[ 2858.328591] hub 2-0:1.0: state 7 ports 8 chg 0068 evt 0000 >[ 2858.328598] hub 2-0:1.0: port 3, status 0503, change 0000, 480 Mb/s >[ 2858.328605] hub 2-0:1.0: port 5, status 0503, change 0000, 480 Mb/s >[ 2858.328611] hub 2-0:1.0: port 6, status 0503, change 0000, 480 Mb/s >[ 2858.328616] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 >[ 2858.328620] hub 2-5:1.0: state 7 ports 4 chg 0002 evt 0002 >[ 2858.329057] done. >[ 2858.329337] hub 2-5:1.0: port 1, status 0303, change 0000, 1.5 Mb/s >[ 2858.329652] hub 2-6:1.0: state 7 ports 4 chg 0002 evt 0002 >[ 2858.329899] hub 2-6:1.0: port 1, status 0303, change 0000, 1.5 Mb/s >[ 2858.501922] EXT4-fs (sdf3): re-mounted. Opts: commit=0 >[ 2858.648633] usb 2-5.1: link qh8-0601/ffff880216bc5500 start 2 [1/2 us] >[ 2859.124333] EXT4-fs (sdf5): re-mounted. Opts: commit=0 >[ 2859.128122] EXT4-fs (sdf6): re-mounted. Opts: commit=0 >[ 2859.367169] EXT4-fs (sdf7): re-mounted. Opts: commit=0
<b>You cannot view the attachment while viewing its details because your browser does not support IFRAMEs. <a href="attachment.cgi?id=257938">View the attachment on a separate page</a>.</b>
View Attachment As Raw
Actions:
View
Attachments on
bug 346955
:
255585
|
255587
|
255589
|
255617
|
255655
|
256981
|
257041
|
257113
|
257115
|
257160
| 257938 |
257940
|
257941
|
257942
|
257943
|
257945
