Linux version 2.6.35-gentoo-r12 (root@cicero) (gcc version 4.4.4 (Gentoo 4.4.4-r2 p1.2, pie-0.4.5) ) #1 SMP Mon Nov 29 22:33:26 PST 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI 2.3 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x3fff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CEFFF write-protect CF000-EFFFF uncachable F0000-FFFFF write-through MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 ACPI: RSDP 000f6850 00014 (v00 GBT ) ACPI: RSDT 3fff3000 0002C (v01 GBT AWRDACPI 42302E31 AWRD 01010101) ACPI: FACP 3fff3040 00074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) ACPI: DSDT 3fff30c0 03E4A (v01 GBT AWRDACPI 00001000 MSFT 0100000C) ACPI: FACS 3fff0000 00040 ACPI: APIC 3fff6f40 00068 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) ACPI: Local APIC address 0xfee00000 135MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0003fff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0003fff0 On node 0 totalpages: 262030 free_area_init_node: node 0, pgdat c1435200, node_mem_map c14d8020 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3966 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 272 pages used for memmap HighMem zone: 34530 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 early_res array is doubled to 64 at [3000 - 37ff] PERCPU: Embedded 10 pages/cpu @c2000000 s28544 r0 d12416 u2097152 pcpu-alloc: s28544 r0 d12416 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259982 Kernel command line: root=/dev/sda1 rootflags=barrier=1 panic=60 quiet acpi_enforce_resources=lax PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Subtract (37 early reservations) #1 [0000001000 - 0000002000] EX TRAMPOLINE #2 [0001000000 - 00014cf2ac] TEXT DATA BSS #3 [000009f800 - 0000100000] BIOS reserved #4 [00014d0000 - 00014d6076] BRK #5 [0000002000 - 0000003000] TRAMPOLINE #6 [0000007000 - 0000008000] PGTABLE #7 [00014d7000 - 00014d8000] BOOTMEM #8 [00014d8000 - 0001cd8000] BOOTMEM #9 [00014cf300 - 00014cf304] BOOTMEM #10 [00014cf380 - 00014cf440] BOOTMEM #11 [00014cf480 - 00014cf4d4] BOOTMEM #12 [0001cd8000 - 0001cdb000] BOOTMEM #13 [00014cf500 - 00014cf510] BOOTMEM #14 [00014d6080 - 00014d6c80] BOOTMEM #15 [00014cf580 - 00014cf5a7] BOOTMEM #16 [00014cf600 - 00014cf6e0] BOOTMEM #17 [00014cf700 - 00014cf740] BOOTMEM #18 [00014cf780 - 00014cf7c0] BOOTMEM #19 [00014cf800 - 00014cf840] BOOTMEM #20 [00014cf880 - 00014cf8c0] BOOTMEM #21 [00014cf900 - 00014cf940] BOOTMEM #22 [00014cf980 - 00014cf9c0] BOOTMEM #23 [00014cfa00 - 00014cfa40] BOOTMEM #24 [00014cfa80 - 00014cfacd] BOOTMEM #25 [00014cfb00 - 00014cfb4d] BOOTMEM #26 [0002000000 - 000200a000] BOOTMEM #27 [0002200000 - 000220a000] BOOTMEM #28 [00014cfb80 - 00014cfb84] BOOTMEM #29 [00014cfc00 - 00014cfc04] BOOTMEM #30 [00014cfc80 - 00014cfc88] BOOTMEM #31 [00014cfd00 - 00014cfd08] BOOTMEM #32 [00014cfd80 - 00014cfe28] BOOTMEM #33 [00014cfe80 - 00014cfee8] BOOTMEM #34 [0001cdb000 - 0001cdf000] BOOTMEM #35 [0001cdf000 - 0001d5f000] BOOTMEM #36 [0001d5f000 - 0001d9f000] BOOTMEM Initializing HighMem for node 0 (000377fe:0003fff0) Memory: 1034080k/1048512k available (2922k kernel code, 14040k reserved, 1397k data, 332k init, 139208k highmem) virtual kernel memory layout: fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc1439000 - 0xc148c000 ( 332 kB) .data : 0xc12daafe - 0xc14381d8 (1397 kB) .text : 0xc1000000 - 0xc12daafe (2922 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:320 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 2813.470 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5626.94 BogoMIPS (lpj=11253880) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 4 MCE banks CPU0: Thermal monitoring enabled (TM1) Performance Events: Netburst events, Netburst P4/Xeon PMU driver. ... version: 0 ... bit width: 40 ... generic registers: 18 ... value mask: 000000ffffffffff ... max period: 0000007fffffffff ... fixed-purpose events: 0 ... event mask: 000000000003ffff Freeing SMP alternatives: 16k freed ACPI: Core revision 20100428 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Booting Node 0, Processors #1 Ok. Initializing CPU#1 Brought up 2 CPUs Total of 2 processors activated (11254.32 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfaed0, last bus=2 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored) pci_root PNP0A03:00: host bridge window [io 0x10c0-0x13ff] (ignored) pci_root PNP0A03:00: host bridge window [io 0x1400-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) pci 0000:00:00.0: Enabling MCH 'Overflow' Device pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff] pci 0000:00:1d.0: reg 20: [io 0xcc00-0xcc1f] pci 0000:00:1d.1: reg 20: [io 0xc000-0xc01f] pci 0000:00:1d.2: reg 20: [io 0xc400-0xc41f] pci 0000:00:1d.3: reg 20: [io 0xc800-0xc81f] pci 0000:00:1d.7: reg 10: [mem 0xfa100000-0xfa1003ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 20: [io 0xf000-0xf00f] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] pci 0000:00:1f.3: reg 20: [io 0x1400-0x141f] pci 0000:00:1f.5: reg 10: [io 0xd400-0xd4ff] pci 0000:00:1f.5: reg 14: [io 0xd800-0xd83f] pci 0000:00:1f.5: reg 18: [mem 0xfa101000-0xfa1011ff] pci 0000:00:1f.5: reg 1c: [mem 0xfa102000-0xfa1020ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xf9000000-0xf900ffff 64bit] pci 0000:01:00.0: reg 20: [io 0xa000-0xa0ff] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10: [mem 0xf9010000-0xf901ffff 64bit] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref] pci 0000:02:08.0: reg 10: [mem 0xfa000000-0xfa000fff] pci 0000:02:08.0: reg 14: [io 0xb000-0xb03f] pci 0000:02:08.0: supports D1 D2 pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:08.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfa0fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.23. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009f800 - 000000000009ffff reserve RAM buffer: 000000003fff0000 - 000000003fffffff hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:00: [mem 0x000d0000-0x000d7fff] has been reserved system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved system 00:00: [mem 0x3fff0000-0x3fffffff] could not be reserved system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved system 00:00: [mem 0xfff00000-0xffffffff] has been reserved system 00:00: [mem 0x000e0000-0x000effff] has been reserved system 00:02: [io 0x04d0-0x04d1] has been reserved system 00:02: [io 0x0290-0x029f] has been reserved system 00:02: [io 0x0800-0x0805] has been reserved pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref] pci 0000:00:1e.0: PCI bridge to [bus 02-02] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfa0fffff] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf9ffffff] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfa0fffff] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling PCI: CLS 32 bytes, default 64 microcode: CPU0 sig=0xf29, pf=0x4, revision=0x2e microcode: CPU1 sig=0xf29, pf=0x4, revision=0x2e microcode: Microcode Update Driver: v2.00 , Peter Oruba highmem bounce pool size: 64 pages squashfs: version 4.0 (2009/01/31) Phillip Lougher fuse init (API version 7.14) msgmni has been set to 1747 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 865 Chipset agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: module loaded ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e100 0000:02:08.0: PME# disabled e100 0000:02:08.0: eth0: addr 0xfa000000, irq 20, MAC addr 00:0d:61:35:6b:2d tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa100000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c800 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input3 rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 it87: Found IT8712F chip at 0x290, revision 5 it87: Beeping is supported ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region IP__ [??? 0x00000295-0x00000296 flags 0x5f] ACPI: This conflict may cause random problems and system instability ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver it87 it87.656: Detected broken BIOS defaults, disabling PWM interface iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1f.5: setting latency timer to 64 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 ata1.00: HPA detected: current 312579695, native 312581808 ata1.00: ATA-6: WDC WD1600JB-00EVA0, 15.05R15, max UDMA/100 ata1.00: 312579695 sectors, multi 16: LBA48 ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4040B, A304, max UDMA/33 ata2.00: configured for UDMA/33 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA WDC WD1600JB-00E 15.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4040B A304 PQ: 0 ANSI: 5 sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 logips2pp: Detected unknown logitech mouse model 62 intel8x0_measure_ac97_clock: measured 55918 usecs (2694 samples) intel8x0: clocking to 48000 ALSA device list: #0: Intel ICH5 with ALC655 at irq 17 TCP cubic registered NET: Registered protocol family 17 p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Using IPI Shortcut mode rtc_cmos 00:04: setting system clock to 2010-12-20 21:04:18 UTC (1292879058) input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input5 EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: barrier=1 VFS: Mounted root (ext2 filesystem) readonly on device 8:1. Freeing unused kernel memory: 332k freed udev: starting version 151 EXT4-fs (sda1): re-mounted. Opts: barrier=1 EXT4-fs (dm-0): mounted filesystem with writeback data mode. Opts: (null) e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex agpgart-intel 0000:00:00.0: AGP 3.0 bridge agpgart-intel 0000:00:00.0: putting AGP V3 device into 4x mode pci 0000:01:00.0: putting AGP V3 device into 4x mode [drm] Setting GART location based on new memory map [drm] Can't use AGP base @0xf0000000, won't fit [drm] Loading R500 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs