--- openssl-1.0.0a/engines/e_padlock.c	2009-05-12 16:24:23.000000000 -0400
+++ /home/solomon/X/e_padlock.c	2010-07-23 09:42:50.000000000 -0400
@@ -101,7 +101,10 @@
    compiler choice is limited to GCC and Microsoft C. */
 #undef COMPILE_HW_PADLOCK
 #if !defined(I386_ONLY) && !defined(OPENSSL_NO_INLINE_ASM)
-# if (defined(__GNUC__) && (defined(__i386__) || defined(__i386))) || \
+# if (defined(__GNUC__) && __GNUC__>=2 && \
+	(defined(__i386__) || defined(__i386) || \
+	 defined(__x86_64__) || defined(__x86_64)) \
+     ) || \
      (defined(_MSC_VER) && defined(_M_IX86))
 #  define COMPILE_HW_PADLOCK
 static ENGINE *ENGINE_padlock (void);
@@ -131,7 +134,7 @@
 # endif
 #elif defined(__GNUC__)
 # ifndef alloca
-#  define alloca(s) __builtin_alloca(s)
+#  define alloca(s) __builtin_alloca((s))
 # endif
 #endif
 
@@ -294,6 +297,7 @@
  * =======================================================
  */
 #if defined(__GNUC__) && __GNUC__>=2
+#if defined(__i386__) || defined(__i386)
 /*
  * As for excessive "push %ebx"/"pop %ebx" found all over.
  * When generating position-independent code GCC won't let
@@ -373,21 +377,6 @@
 	return padlock_use_ace + padlock_use_rng;
 }
 
-#ifndef OPENSSL_NO_AES
-/* Our own htonl()/ntohl() */
-static inline void
-padlock_bswapl(AES_KEY *ks)
-{
-	size_t i = sizeof(ks->rd_key)/sizeof(ks->rd_key[0]);
-	unsigned int *key = ks->rd_key;
-
-	while (i--) {
-		asm volatile ("bswapl %0" : "+r"(*key));
-		key++;
-	}
-}
-#endif
-
 /* Force key reload from memory to the CPU microcode.
    Loading EFLAGS from the stack clears EFLAGS[30] 
    which does the trick. */
@@ -445,12 +434,127 @@
 		: "edx", "cc", "memory");	\
 	return iv;				\
 }
+#endif
+
+#elif defined(__x86_64__) || defined(__x86_64)
+
+/* Load supported features of the CPU to see if
+   the PadLock is available. */
+static int
+padlock_available(void)
+{
+	char vendor_string[16];
+	unsigned int eax, edx;
 
+	/* Are we running on the Centaur (VIA) CPU? */
+	eax = 0x00000000;
+	vendor_string[12] = 0;
+	asm volatile (
+		"cpuid\n"
+		"movl	%%ebx,(%1)\n"
+		"movl	%%edx,4(%1)\n"
+		"movl	%%ecx,8(%1)\n"
+		: "+a"(eax) : "r"(vendor_string) : "rbx", "rcx", "rdx");
+	if (strcmp(vendor_string, "CentaurHauls") != 0)
+		return 0;
+
+	/* Check for Centaur Extended Feature Flags presence */
+	eax = 0xC0000000;
+	asm volatile ("cpuid"
+		: "+a"(eax) : : "rbx", "rcx", "rdx");
+	if (eax < 0xC0000001)
+		return 0;
+
+	/* Read the Centaur Extended Feature Flags */
+	eax = 0xC0000001;
+	asm volatile ("cpuid"
+		: "+a"(eax), "=d"(edx) : : "rbx", "rcx");
+
+	/* Fill up some flags */
+	padlock_use_ace = ((edx & (0x3<<6)) == (0x3<<6));
+	padlock_use_rng = ((edx & (0x3<<2)) == (0x3<<2));
+
+	return padlock_use_ace + padlock_use_rng;
+}
+
+/* Force key reload from memory to the CPU microcode.
+   Loading EFLAGS from the stack clears EFLAGS[30] 
+   which does the trick. */
+static inline void
+padlock_reload_key(void)
+{
+	asm volatile ("pushfq; popfq");
+}
+
+#ifndef OPENSSL_NO_AES
+/*
+ * This is heuristic key context tracing. At first one
+ * believes that one should use atomic swap instructions,
+ * but it's not actually necessary. Point is that if
+ * padlock_saved_context was changed by another thread
+ * after we've read it and before we compare it with cdata,
+ * our key *shall* be reloaded upon thread context switch
+ * and we are therefore set in either case...
+ */
+static inline void
+padlock_verify_context(struct padlock_cipher_data *cdata)
+{
+	asm volatile (
+	"pushfq\n"
+"	btl	$30,(%%rsp)\n"
+"	jnc	1f\n"
+"	cmpq	%2,%1\n"
+"	je	1f\n"
+"	popfq\n"
+"	subq	$8,%%rsp\n"
+"1:	addq	$8,%%rsp\n"
+"	movq	%2,%0"
+	:"+m"(padlock_saved_context)
+	: "r"(padlock_saved_context), "r"(cdata) : "cc");
+}
+
+/* Template for padlock_xcrypt_* modes */
+/* BIG FAT WARNING: 
+ * 	The offsets used with 'leal' instructions
+ * 	describe items of the 'padlock_cipher_data'
+ * 	structure.
+ */
+#define PADLOCK_XCRYPT_ASM(name,rep_xcrypt)	\
+static inline void *name(size_t cnt,		\
+	struct padlock_cipher_data *cdata,	\
+	void *out, const void *inp) 		\
+{	void *iv; 				\
+	asm volatile ( "leaq	16(%0),%%rdx\n"	\
+		"	leaq	32(%0),%%rbx\n"	\
+			rep_xcrypt "\n"		\
+		: "=a"(iv), "=c"(cnt), "=D"(out), "=S"(inp) \
+		: "0"(cdata), "1"(cnt), "2"(out), "3"(inp)  \
+		: "rbx", "rdx", "cc", "memory");	\
+	return iv;				\
+}
+#endif
+
+#endif	/* cpu */
+
+#ifndef OPENSSL_NO_AES
 /* Generate all functions with appropriate opcodes */
 PADLOCK_XCRYPT_ASM(padlock_xcrypt_ecb, ".byte 0xf3,0x0f,0xa7,0xc8")	/* rep xcryptecb */
 PADLOCK_XCRYPT_ASM(padlock_xcrypt_cbc, ".byte 0xf3,0x0f,0xa7,0xd0")	/* rep xcryptcbc */
 PADLOCK_XCRYPT_ASM(padlock_xcrypt_cfb, ".byte 0xf3,0x0f,0xa7,0xe0")	/* rep xcryptcfb */
 PADLOCK_XCRYPT_ASM(padlock_xcrypt_ofb, ".byte 0xf3,0x0f,0xa7,0xe8")	/* rep xcryptofb */
+
+/* Our own htonl()/ntohl() */
+static inline void
+padlock_bswapl(AES_KEY *ks)
+{
+	size_t i = sizeof(ks->rd_key)/sizeof(ks->rd_key[0]);
+	unsigned int *key = ks->rd_key;
+
+	while (i--) {
+		asm volatile ("bswapl %0" : "+r"(*key));
+		key++;
+	}
+}
 #endif
 
 /* The RNG call itself */
@@ -481,8 +585,8 @@
 static inline unsigned char *
 padlock_memcpy(void *dst,const void *src,size_t n)
 {
-	long       *d=dst;
-	const long *s=src;
+	size_t       *d=dst;
+	const size_t *s=src;
 
 	n /= sizeof(*d);
 	do { *d++ = *s++; } while (--n);