dmesg from second machine fails all drives in the array

a7n8x-2.6.34-r12-dmesg (text/plain), 59.79 KB, created by dak on 2010-11-08 20:13:58 UTC

Linux version 2.6.34-gentoo-r12 (root@demeter) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 Thu Nov 4 22:51:44 EDT 2010
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
 BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 base 0D8000000 mask FFC000000 write-combining
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Warning only 895MB will be used.
Use a HIGHMEM enabled kernel.
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-0000000037fa2000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037c00000 page 2M
 0037c00000 - 0037fa2000 page 4k
kernel direct mapping tables up to 37fa2000 @ 14000-19000
ACPI: RSDP 000f6d80 00014 (v00 Nvidia)
ACPI: RSDT 3fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 3fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 3fff30c0 04489 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 3fff0000 00040
ACPI: APIC 3fff7580 0005A (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
895MB LOWMEM available.
  mapped low ram: 0 - 37fa2000
  low ram: 0 - 37fa2000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x00037fa2
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x00037fa2
On node 0 totalpages: 229167
free_area_init_node: node 0, pgdat c150ffe0, node_mem_map c15e5340
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3949 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223426 pages, LIFO batch:31
Using APIC driver default
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227375
Kernel command line: root=/dev/hda3
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (27 early reservations)
  #0 [0001000000 - 00015deea0]   TEXT DATA BSS
  #1 [000009d800 - 0000100000]   BIOS reserved
  #2 [00015df000 - 00015e5121]             BRK
  #3 [0000010000 - 0000014000]     ACPI WAKEUP
  #4 [0000014000 - 0000015000]         PGTABLE
  #5 [00015e5140 - 0001ce5140]         BOOTMEM
  #6 [00015deec0 - 00015deec4]         BOOTMEM
  #7 [00015def00 - 00015def80]         BOOTMEM
  #8 [00015def80 - 00015defd4]         BOOTMEM
  #9 [0001ce5140 - 0001ce7140]         BOOTMEM
  #10 [0001ce7140 - 0001ce7167]         BOOTMEM
  #11 [0001ce7180 - 0001ce7298]         BOOTMEM
  #12 [0001ce72c0 - 0001ce7300]         BOOTMEM
  #13 [0001ce7300 - 0001ce7340]         BOOTMEM
  #14 [0001ce7340 - 0001ce7380]         BOOTMEM
  #15 [0001ce7380 - 0001ce73c0]         BOOTMEM
  #16 [0001ce73c0 - 0001ce7400]         BOOTMEM
  #17 [0001ce7400 - 0001ce7440]         BOOTMEM
  #18 [0001ce7440 - 0001ce7480]         BOOTMEM
  #19 [0001ce7480 - 0001ce74c0]         BOOTMEM
  #20 [0001ce74c0 - 0001ce7500]         BOOTMEM
  #21 [0001ce7500 - 0001ce7510]         BOOTMEM
  #22 [0001ce7540 - 0001ce754f]         BOOTMEM
  #23 [0001ce7580 - 0001ce758f]         BOOTMEM
  #24 [0001ce75c0 - 0001ceb5c0]         BOOTMEM
  #25 [0001ceb5c0 - 0001d6b5c0]         BOOTMEM
  #26 [0001d6b5c0 - 0001dab5c0]         BOOTMEM
Memory: 902648k/917128k available (3390k kernel code, 14020k reserved, 1810k data, 336k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffa4000 - 0xfffff000   ( 364 kB)
    vmalloc : 0xf87a2000 - 0xfffa2000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7fa2000   ( 895 MB)
      .init : 0xc1515000 - 0xc1569000   ( 336 kB)
      .data : 0xc134fb56 - 0xc15146a4   (1810 kB)
      .text : 0xc1000000 - 0xc134fb56   (3390 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is enabled.
NR_IRQS:288
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2162.761 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4325.52 BogoMIPS (lpj=8651044)
Mount-cache hash table entries: 512
mce: CPU supports 4 MCE banks
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
CPU: AMD Athlon(tm) XP 2700+ stepping 01
Checking 'hlt' instruction... OK.
ACPI: Core revision 20100121
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  6130.000 MB/sec
xor: using function: pIII_sse (6130.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb560, last bus=3
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
pci 0000:00:00.0: reg 10: [mem 0xd8000000-0xdbffffff pref]
pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
pci 0000:00:01.1: reg 10: [io  0xc000-0xc01f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xe2000000-0xe2000fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xe2001000-0xe2001fff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:02.2: reg 10: [mem 0xe2002000-0xe20020ff]
pci 0000:00:02.2: supports D1 D2
pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.2: PME# disabled
pci 0000:00:04.0: reg 10: [mem 0xe2003000-0xe2003fff]
pci 0000:00:04.0: reg 14: [io  0xc400-0xc407]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:09.0: reg 20: [io  0xf000-0xf00f]
pci 0000:01:09.0: reg 10: [io  0x9000-0x90ff]
pci 0000:01:09.0: reg 14: [mem 0xe1021000-0xe10210ff]
pci 0000:01:09.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:09.0: supports D1 D2
pci 0000:01:09.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:09.0: PME# disabled
pci 0000:01:0a.0: reg 10: [io  0x9400-0x947f]
pci 0000:01:0a.0: reg 18: [io  0x9800-0x98ff]
pci 0000:01:0a.0: reg 1c: [mem 0xe1020000-0xe1020fff]
pci 0000:01:0a.0: reg 20: [mem 0xe1000000-0xe101ffff]
pci 0000:01:0a.0: reg 30: [mem 0x00000000-0x00007fff pref]
pci 0000:01:0a.0: supports D1
pci 0000:01:0b.0: reg 10: [io  0x9c00-0x9c07]
pci 0000:01:0b.0: reg 14: [io  0xa000-0xa003]
pci 0000:01:0b.0: reg 18: [io  0xa400-0xa407]
pci 0000:01:0b.0: reg 1c: [io  0xa800-0xa803]
pci 0000:01:0b.0: reg 20: [io  0xac00-0xac0f]
pci 0000:01:0b.0: reg 24: [mem 0xe1022000-0xe10221ff]
pci 0000:01:0b.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:0b.0: supports D1 D2
pci 0000:00:08.0: PCI bridge to [bus 01-01]
pci 0000:00:08.0:   bridge window [io  0x9000-0xafff]
pci 0000:00:08.0:   bridge window [mem 0xe0000000-0xe1ffffff]
pci 0000:00:08.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:01.0: reg 10: [io  0xb000-0xb07f]
pci 0000:02:01.0: reg 14: [mem 0xdd000000-0xdd00007f]
pci 0000:02:01.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:00:0c.0: PCI bridge to [bus 02-02]
pci 0000:00:0c.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:0c.0:   bridge window [mem 0xdc000000-0xddffffff]
pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xde000000-0xdeffffff]
pci 0000:03:00.0: reg 14: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xde000000-0xdfffffff]
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd7ffffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16)
ACPI: PCI Interrupt Link [APC2] (IRQs *17)
ACPI: PCI Interrupt Link [APC3] (IRQs *18)
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1    782 MB/s
raid6: int32x2   1057 MB/s
raid6: int32x4    816 MB/s
raid6: int32x8    563 MB/s
raid6: mmxx1     1746 MB/s
raid6: mmxx2     2853 MB/s
raid6: sse1x1    1644 MB/s
raid6: sse1x2    2645 MB/s
raid6: using algorithm sse1x2 (2645 MB/s)
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 32 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff 
reserve RAM buffer: 000000003fff0000 - 000000003fffffff 
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [io  0x4000-0x407f] has been reserved
system 00:00: [io  0x4080-0x40ff] has been reserved
system 00:00: [io  0x4400-0x447f] has been reserved
system 00:00: [io  0x4480-0x44ff] has been reserved
system 00:00: [io  0x4200-0x427f] has been reserved
system 00:00: [io  0x4280-0x42ff] has been reserved
system 00:01: [io  0x5000-0x503f] has been reserved
system 00:01: [io  0x5500-0x553f] has been reserved
system 00:02: [mem 0x000d7800-0x000d7fff] has been reserved
system 00:02: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:02: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:02: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:02: [mem 0x3fff0000-0x3fffffff] could not be reserved
system 00:02: [mem 0xffff0000-0xffffffff] has been reserved
system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:02: [mem 0x00100000-0x3ffeffff] could not be reserved
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [io  0x04d0-0x04d1] has been reserved
pci 0000:00:08.0: BAR 9: assigned [mem 0x40000000-0x400fffff pref]
pci 0000:00:0c.0: BAR 9: assigned [mem 0x40100000-0x401fffff pref]
pci 0000:01:0b.0: BAR 6: assigned [mem 0x40000000-0x4007ffff pref]
pci 0000:01:09.0: BAR 6: assigned [mem 0x40080000-0x4009ffff pref]
pci 0000:01:0a.0: BAR 6: assigned [mem 0x400a0000-0x400a7fff pref]
pci 0000:00:08.0: PCI bridge to [bus 01-01]
pci 0000:00:08.0:   bridge window [io  0x9000-0xafff]
pci 0000:00:08.0:   bridge window [mem 0xe0000000-0xe1ffffff]
pci 0000:00:08.0:   bridge window [mem 0x40000000-0x400fffff pref]
pci 0000:02:01.0: BAR 6: assigned [mem 0x40100000-0x4011ffff pref]
pci 0000:00:0c.0: PCI bridge to [bus 02-02]
pci 0000:00:0c.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:0c.0:   bridge window [mem 0xdc000000-0xddffffff]
pci 0000:00:0c.0:   bridge window [mem 0x40100000-0x401fffff pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xdf000000-0xdf01ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem 0xde000000-0xdfffffff]
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd7ffffff pref]
pci 0000:00:08.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x9000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff]
pci_bus 0000:01: resource 2 [mem 0x40000000-0x400fffff pref]
pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xdc000000-0xddffffff]
pci_bus 0000:02: resource 2 [mem 0x40100000-0x401fffff pref]
pci_bus 0000:03: resource 1 [mem 0xde000000-0xdfffffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd7ffffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS mismatch (32 != 4), using 32 bytes
pci 0000:03:00.0: Boot video device
cpufreq-nforce2: Detected nForce2 chipset revision A2
cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss.
cpufreq-nforce2: FSB currently at 166 MHz, FID 13.0
Marking TSC unstable due to cpufreq changes
Switching to clocksource acpi_pm
HugeTLB registered 4 MB page size, pre-allocated 0 pages
Installing knfsd (copyright (C) 1996 [e-mail]).
JFS: nTxBlock = 7051, nTxLock = 56415
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 1762
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
amd74xx 0000:00:09.0: UDMA133 controller
amd74xx 0000:00:09.0: IDE controller (0x10de:0x0065 rev 0xa2)
amd74xx 0000:00:09.0: BIOS didn't set cable bits correctly. Enabling workaround.
amd74xx 0000:00:09.0: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007
    ide1: BM-DMA at 0xf008-0xf00f
Probing IDE interface ide0...
hda: Maxtor 91700U5, ATA DISK drive
hdb: WDC WD205BA, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/66 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 33235776 sectors (17016 MB) w/2048KiB Cache, CHS=32972/16/63
hda: cache flushes not supported
 hda: hda1 hda2 hda3
hdb: max request size: 128KiB
hdb: 40088160 sectors (20525 MB) w/2048KiB Cache, CHS=39770/16/63
hdb: cache flushes not supported
 hdb: hdb1 hdb2 hdb3
ide-cd driver 5.00
3ware Storage Controller device driver for Linux v1.26.02.002.
sata_promise 0000:01:0a.0: version 2.12
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
sata_promise 0000:01:0a.0: PCI INT A -> Link[APC1] -> GSI 16 (level, high) -> IRQ 16
scsi0 : sata_promise
scsi1 : sata_promise
scsi2 : sata_promise
scsi3 : sata_promise
ata1: SATA max UDMA/133 mmio m4096@0xe1020000 ata 0xe1020380 irq 16
ata2: SATA max UDMA/133 mmio m4096@0xe1020000 ata 0xe1020280 irq 16
ata3: SATA max UDMA/133 mmio m4096@0xe1020000 ata 0xe1020200 irq 16
ata4: SATA max UDMA/133 mmio m4096@0xe1020000 ata 0xe1020300 irq 16
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 22
3c59x 0000:02:01.0: PCI INT A -> Link[AP3C] -> GSI 22 (level, high) -> IRQ 22
3c59x: Donald Becker and others.
0000:02:01.0: 3Com PCI 3c920 Tornado at f8bca000.
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 21 (level, high) -> IRQ 21
forcedeth 0000:00:04.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD204UI  1AQ1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
sd 0:0:0:0: Attached scsi generic sg0 type 0
 sda1
sd 0:0:0:0: [sda] Attached SCSI disk
forcedeth 0000:00:04.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:0c:6e:09:95:a0
forcedeth 0000:00:04.0: timirq lnktim desc-v1
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
r8169 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, high) -> IRQ 17
r8169 0000:01:09.0: (unregistered net_device): no PCI Express capability
r8169 0000:01:09.0: eth2: RTL8169sb/8110sb at 0xf8bd2000, 00:14:d1:1d:7f:8e, XID 10000000 IRQ 17
console [netcon0] enabled
netconsole: network logging started
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 20 (level, high) -> IRQ 20
ehci_hcd 0000:00:02.2: setting latency timer to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: debug port 1
ehci_hcd 0000:00:02.2: cache line size of 32 is not supported
ehci_hcd 0000:00:02.2: irq 20, io mem 0xe2002000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, high) -> IRQ 22
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xe2000000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 21 (level, high) -> IRQ 21
ohci_hcd 0000:00:02.1: setting latency timer to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 21, io mem 0xe2001000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [e-mail]
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
usb 1-2: new high speed USB device using ehci_hcd and address 2
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD204UI  1AQ1 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb:
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi4 : usb-storage 1-2:1.0
 sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD204UI  1AQ1 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc:
sd 2:0:0:0: Attached scsi generic sg2 type 0
 sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD204UI  1AQ1 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd:
sd 3:0:0:0: Attached scsi generic sg3 type 0
 sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
scsi 4:0:0:0: Direct-Access     Crucial  Gizmo!           1100 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sde] Assuming drive cache: write through
sd 4:0:0:0: [sde] Assuming drive cache: write through
 sde: sde1
sd 4:0:0:0: [sde] Assuming drive cache: write through
sd 4:0:0:0: [sde] Attached SCSI removable disk
md: Scanned 4 and added 4 devices.
md: autorun ...
md: considering sdd1 ...
md:  adding sdd1 ...
md:  adding sdc1 ...
md:  adding sdb1 ...
md:  adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: bind<sdc1>
md: bind<sdd1>
md: running: <sdd1><sdc1><sdb1><sda1>
raid5: device sdd1 operational as raid disk 3
raid5: device sdc1 operational as raid disk 2
raid5: device sdb1 operational as raid disk 1
raid5: device sda1 operational as raid disk 0
raid5: allocated 4216kB for md0
3: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
2: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
1: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
0: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
raid5: raid level 5 set md0 active with 4 out of 4 devices, algorithm 2
RAID5 conf printout:
 --- rd:4 wd:4
 disk 0, o:1, dev:sda1
 disk 1, o:1, dev:sdb1
 disk 2, o:1, dev:sdc1
 disk 3, o:1, dev:sdd1
md0: detected capacity change from 0 to 6001196335104
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs (hda3): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 3:3.
Freeing unused kernel memory: 336k freed
 md0: unknown partition table
EXT3-fs (hda3): using internal journal
Adding 755048k swap on /dev/hda2.  Priority:-1 extents:1 across:755048k 
eth0:  setting full-duplex.
eth2: no link during initialization.
ADDRCONF(NETDEV_UP): eth2: link is not ready
eth0: no IPv6 routers present
hda: UDMA/66 mode selected
hdb: UDMA/66 mode selected
pc87360: PC8736x not detected, module not inserted.
r8169 0000:01:09.0: eth1: link down
ADDRCONF(NETDEV_UP): eth1: link is not ready
svc: failed to register lockdv1 RPC service (errno 97).
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sde1): using internal journal
EXT3-fs (sde1): mounted filesystem with writeback data mode
nfsd: last server has exited, flushing export cache
eth2: link up.
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
r8169 0000:01:09.0: eth1: link down
ADDRCONF(NETDEV_UP): eth1: link is not ready
eth2: no IPv6 routers present
eth2: no IPv6 routers present
eth0:  setting full-duplex.
eth0: no IPv6 routers present
eth2: no IPv6 routers present
r8169 0000:01:09.0: eth1: link up
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
r8169 0000:01:09.0: eth1: link up
eth1: no IPv6 routers present
r8169 0000:01:09.0: eth1: link up
------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0xe2/0x157()
Hardware name: A7N8X
NETDEV WATCHDOG: eth1 (r8169): transmit queue 0 timed out
Modules linked in: sha256_generic aes_generic hwmon_vid hwmon i2c_core
Pid: 0, comm: swapper Not tainted 2.6.34-gentoo-r12 #1
Call Trace:
 [<c101deda>] ? warn_slowpath_common+0x52/0x71
 [<c101dee6>] ? warn_slowpath_common+0x5e/0x71
 [<c12d4a7c>] ? dev_watchdog+0x0/0x157
 [<c101df2b>] ? warn_slowpath_fmt+0x26/0x2a
 [<c12d4b5e>] ? dev_watchdog+0xe2/0x157
 [<c1020039>] ? do_exit+0xa0/0x4d5
 [<c1011e56>] ? lapic_next_event+0x13/0x16
 [<c103437a>] ? clockevents_program_event+0xc3/0xd1
 [<c1034fbd>] ? tick_dev_program_event+0x1e/0xfa
 [<c12d4a7c>] ? dev_watchdog+0x0/0x157
 [<c1024b91>] ? run_timer_softirq+0x100/0x142
 [<c10215bf>] ? __do_softirq+0x5d/0xc4
 [<c1021648>] ? do_softirq+0x22/0x26
 [<c1021864>] ? irq_exit+0x25/0x53
 [<c10121f3>] ? smp_apic_timer_interrupt+0x5f/0x67
 [<c134ed22>] ? apic_timer_interrupt+0x2a/0x30
 [<c1006fdb>] ? default_idle+0x25/0x38
 [<c1001838>] ? cpu_idle+0x23/0x3c
 [<c151570f>] ? start_kernel+0x25a/0x25d
---[ end trace 7513275554f80219 ]---
r8169 0000:01:09.0: eth1: link up
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: failed command: READ DMA EXT
ata4.00: cmd 25/00:30:10:81:8c/00:00:b6:00:00/e0 tag 0 dma 24576 in
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: failed command: READ DMA EXT
ata1.00: cmd 25/00:80:c0:80:8c/00:00:b6:00:00/e0 tag 0 dma 65536 in
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: hard resetting link
ata4: link is slow to respond, please be patient (ready=-19)
ata1: link is slow to respond, please be patient (ready=-19)
ata4: SRST failed (errno=-16)
ata4: hard resetting link
ata1: SRST failed (errno=-16)
ata1: hard resetting link
ata1: link is slow to respond, please be patient (ready=-19)
ata4: link is slow to respond, please be patient (ready=-19)
ata1: SRST failed (errno=-16)
ata1: hard resetting link
ata4: SRST failed (errno=-16)
ata4: hard resetting link
ata1: link is slow to respond, please be patient (ready=-19)
ata4: link is slow to respond, please be patient (ready=-19)
ata1: SRST failed (errno=-16)
ata1: limiting SATA link speed to 1.5 Gbps
ata1: hard resetting link
ata4: SRST failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata1: SRST failed (errno=-16)
ata1: reset failed, giving up
ata1.00: disabled
ata1.00: device reported invalid CHS sector 0
ata1: EH complete
sd 0:0:0:0: [sda] Unhandled error code
sd 0:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
sd 0:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 b6 8c 80 c0 00 00 80 00
end_request: I/O error, dev sda, sector 3062661312
ata4: SRST failed (errno=-16)
ata4: reset failed, giving up
ata4.00: disabled
ata4.00: device reported invalid CHS sector 0
ata4: EH complete
sd 3:0:0:0: [sdd] Unhandled error code
sd 3:0:0:0: [sdd] Result: hostbyte=0x04 driverbyte=0x00
sd 3:0:0:0: [sdd] CDB: cdb[0]=0x28: 28 00 b6 8c 81 10 00 00 30 00
end_request: I/O error, dev sdd, sector 3062661392
sd 3:0:0:0: [sdd] Unhandled error code
sd 3:0:0:0: [sdd] Result: hostbyte=0x04 driverbyte=0x00
sd 3:0:0:0: [sdd] CDB: cdb[0]=0x28: 28 00 b6 8c 80 c0 00 00 08 00
end_request: I/O error, dev sdd, sector 3062661312
sd 3:0:0:0: [sdd] Unhandled error code
sd 3:0:0:0: [sdd] Result: hostbyte=0x04 driverbyte=0x00
sd 3:0:0:0: [sdd] CDB: cdb[0]=0x28: 28 00 b6 8c 80 c8 00 00 78 00
end_request: I/O error, dev sdd, sector 3062661320
raid5: Disk failure on sdd1, disabling device.
raid5: Operation continuing on 3 devices.
raid5: Disk failure on sda1, disabling device.
raid5: Operation continuing on 2 devices.
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: failed command: READ DMA EXT
ata2.00: cmd 25/00:80:c0:80:8c/00:00:b6:00:00/e0 tag 0 dma 65536 in
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: failed command: READ DMA EXT
ata3.00: cmd 25/00:80:c0:80:8c/00:00:b6:00:00/e0 tag 0 dma 65536 in
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: qc timeout (cmd 0x27)
ata2.00: failed to read native max address (err_mask=0x4)
ata2.00: HPA support seems broken, skipping HPA handling
ata2.00: revalidation failed (errno=-5)
ata2: hard resetting link
ata3.00: qc timeout (cmd 0x27)
ata3.00: failed to read native max address (err_mask=0x4)
ata3.00: HPA support seems broken, skipping HPA handling
ata3.00: revalidation failed (errno=-5)
ata3: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2.00: device reported invalid CHS sector 0
ata2: EH complete
ata3.00: configured for UDMA/133
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: failed command: READ DMA EXT
ata2.00: cmd 25/00:80:c0:80:8c/00:00:b6:00:00/e0 tag 0 dma 65536 in
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: failed command: READ DMA EXT
ata3.00: cmd 25/00:80:c0:80:8c/00:00:b6:00:00/e0 tag 0 dma 65536 in
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
ata2.00: configured for UDMA/133
ata2.00: device reported invalid CHS sector 0
ata2: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: failed command: READ DMA EXT
ata3.00: cmd 25/00:80:c0:80:8c/00:00:b6:00:00/e0 tag 0 dma 65536 in
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: failed command: READ DMA EXT
ata2.00: cmd 25/00:80:c0:80:8c/00:00:b6:00:00/e0 tag 0 dma 65536 in
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2.00: device reported invalid CHS sector 0
ata2: EH complete
ata3.00: configured for UDMA/133
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
INFO: task ata_aux:274 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ata_aux       D 00000000     0   274      2 0x00000000
 f789d130 00000046 ffffffff 00000000 00000000 00000000 7fffffff f79b7e84
 f79b7e08 00000002 c134dda6 00000000 00000000 00000000 f78b04c8 f78b04c8
 ca06f960 f6c0d800 c116baa5 ca06f960 f78b04c8 f6ca2800 c11fb7da f6ca28b4
Call Trace:
 [<c134dda6>] ? schedule_timeout+0x14/0x11d
 [<c116baa5>] ? blk_peek_request+0x85/0x11e
 [<c11fb7da>] ? scsi_request_fn+0x293/0x31c
 [<c134d9ab>] ? wait_for_common+0x84/0xd6
 [<c101b753>] ? default_wake_function+0x0/0x8
 [<c116e7bc>] ? blk_execute_rq+0x75/0x89
 [<c116e6c8>] ? blk_end_sync_rq+0x0/0x23
 [<c11743c6>] ? cfq_set_request+0x0/0x282
 [<c1169dd5>] ? elv_set_request+0x14/0x22
 [<c116c2f0>] ? get_request+0x185/0x202
 [<c116c40b>] ? get_request_wait+0x9e/0xaf
 [<c11fb386>] ? scsi_execute+0xdb/0x11b
 [<c11fb41e>] ? scsi_execute_req+0x58/0xaa
 [<c1226207>] ? sd_revalidate_disk+0xfc/0x104d
 [<c101a7e2>] ? update_curr+0x5e/0x8d
 [<c1085b4c>] ? revalidate_disk+0x19/0x52
 [<c122547f>] ? sd_rescan+0x17/0x1e
 [<c11fd0a6>] ? scsi_rescan_device+0x2c/0x37
 [<c1234338>] ? ata_scsi_dev_rescan+0x42/0x77
 [<c12342f6>] ? ata_scsi_dev_rescan+0x0/0x77
 [<c1029bd0>] ? worker_thread+0xce/0x13c
 [<c102bc8c>] ? autoremove_wake_function+0x0/0x2d
 [<c1029b02>] ? worker_thread+0x0/0x13c
 [<c102bb45>] ? kthread+0x60/0x67
 [<c102bae5>] ? kthread+0x0/0x67
 [<c1002a76>] ? kernel_thread_helper+0x6/0x10
INFO: task md0_raid5:1268 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
md0_raid5     D c116c972     0  1268      2 0x00000000
 f7315b80 00000046 00000000 c116c972 01e08780 00000000 f6c6e000 f6c6e000
 f6c6e1c0 00000000 c1299c86 00000000 f7315b80 c102bc8c f6c6e1c0 f6c6e1c0
 f6c6e010 0003e73d c129a4fa 0003e73c 00000000 00000001 00000002 00000000
Call Trace:
 [<c116c972>] ? submit_bio+0x8c/0x92
 [<c1299c86>] ? md_super_wait+0x7c/0x8d
 [<c102bc8c>] ? autoremove_wake_function+0x0/0x2d
 [<c129a4fa>] ? md_update_sb+0x2fc/0x36a
 [<c129e385>] ? md_check_recovery+0x191/0x3eb
 [<c12947fe>] ? raid5d+0x11/0x2ef
 [<c1294ad8>] ? raid5d+0x2eb/0x2ef
 [<c129f16a>] ? md_thread+0xae/0xc5
 [<c102bc8c>] ? autoremove_wake_function+0x0/0x2d
 [<c129f0bc>] ? md_thread+0x0/0xc5
 [<c102bb45>] ? kthread+0x60/0x67
 [<c102bae5>] ? kthread+0x0/0x67
 [<c1002a76>] ? kernel_thread_helper+0x6/0x10
ata2: limiting SATA link speed to 1.5 Gbps
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: failed command: READ DMA EXT
ata2.00: cmd 25/00:80:c0:80:8c/00:00:b6:00:00/e0 tag 0 dma 65536 in
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata3: limiting SATA link speed to 1.5 Gbps
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: failed command: READ DMA EXT
ata3.00: cmd 25/00:80:c0:80:8c/00:00:b6:00:00/e0 tag 0 dma 65536 in
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/133
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
ata2.00: configured for UDMA/133
ata2.00: device reported invalid CHS sector 0
ata2: EH complete
r8169 0000:01:09.0: eth1: link up
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: failed command: READ DMA EXT
ata3.00: cmd 25/00:80:c0:80:8c/00:00:b6:00:00/e0 tag 0 dma 65536 in
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: failed command: READ DMA EXT
ata2.00: cmd 25/00:80:c0:80:8c/00:00:b6:00:00/e0 tag 0 dma 65536 in
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: configured for UDMA/133
ata2.00: device reported invalid CHS sector 0
ata2: EH complete
ata3.00: configured for UDMA/133
ata3.00: device reported invalid CHS sector 0
ata3: EH complete
INFO: task ata_aux:274 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ata_aux       D 00000000     0   274      2 0x00000000
 f789d130 00000046 ffffffff 00000000 00000000 00000000 7fffffff f79b7e84
 f79b7e08 00000002 c134dda6 00000000 00000000 00000000 f78b04c8 f78b04c8
 ca06f960 f6c0d800 c116baa5 ca06f960 f78b04c8 f6ca2800 c11fb7da f6ca28b4
Call Trace:
 [<c134dda6>] ? schedule_timeout+0x14/0x11d
 [<c116baa5>] ? blk_peek_request+0x85/0x11e
 [<c11fb7da>] ? scsi_request_fn+0x293/0x31c
 [<c134d9ab>] ? wait_for_common+0x84/0xd6
 [<c101b753>] ? default_wake_function+0x0/0x8
 [<c116e7bc>] ? blk_execute_rq+0x75/0x89
 [<c116e6c8>] ? blk_end_sync_rq+0x0/0x23
 [<c11743c6>] ? cfq_set_request+0x0/0x282
 [<c1169dd5>] ? elv_set_request+0x14/0x22
 [<c116c2f0>] ? get_request+0x185/0x202
 [<c116c40b>] ? get_request_wait+0x9e/0xaf
 [<c11fb386>] ? scsi_execute+0xdb/0x11b
 [<c11fb41e>] ? scsi_execute_req+0x58/0xaa
 [<c1226207>] ? sd_revalidate_disk+0xfc/0x104d
 [<c101a7e2>] ? update_curr+0x5e/0x8d
 [<c1085b4c>] ? revalidate_disk+0x19/0x52
 [<c122547f>] ? sd_rescan+0x17/0x1e
 [<c11fd0a6>] ? scsi_rescan_device+0x2c/0x37
 [<c1234338>] ? ata_scsi_dev_rescan+0x42/0x77
 [<c12342f6>] ? ata_scsi_dev_rescan+0x0/0x77
 [<c1029bd0>] ? worker_thread+0xce/0x13c
 [<c102bc8c>] ? autoremove_wake_function+0x0/0x2d
 [<c1029b02>] ? worker_thread+0x0/0x13c
 [<c102bb45>] ? kthread+0x60/0x67
 [<c102bae5>] ? kthread+0x0/0x67
 [<c1002a76>] ? kernel_thread_helper+0x6/0x10
INFO: task md0_raid5:1268 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
md0_raid5     D c116c972     0  1268      2 0x00000000
 f7315b80 00000046 00000000 c116c972 01e08780 00000000 f6c6e000 f6c6e000
 f6c6e1c0 00000000 c1299c86 00000000 f7315b80 c102bc8c f6c6e1c0 f6c6e1c0
 f6c6e010 0003e73d c129a4fa 0003e73c 00000000 00000001 00000002 00000000
Call Trace:
 [<c116c972>] ? submit_bio+0x8c/0x92
 [<c1299c86>] ? md_super_wait+0x7c/0x8d
 [<c102bc8c>] ? autoremove_wake_function+0x0/0x2d
 [<c129a4fa>] ? md_update_sb+0x2fc/0x36a
 [<c129e385>] ? md_check_recovery+0x191/0x3eb
 [<c12947fe>] ? raid5d+0x11/0x2ef
 [<c1294ad8>] ? raid5d+0x2eb/0x2ef
 [<c129f16a>] ? md_thread+0xae/0xc5
 [<c102bc8c>] ? autoremove_wake_function+0x0/0x2d
 [<c129f0bc>] ? md_thread+0x0/0xc5
 [<c102bb45>] ? kthread+0x60/0x67
 [<c102bae5>] ? kthread+0x0/0x67
 [<c1002a76>] ? kernel_thread_helper+0x6/0x10
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: failed command: READ DMA EXT
ata2.00: cmd 25/00:80:c0:80:8c/00:00:b6:00:00/e0 tag 0 dma 65536 in
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: failed command: READ DMA EXT
ata3.00: cmd 25/00:80:c0:80:8c/00:00:b6:00:00/e0 tag 0 dma 65536 in
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/133
ata3.00: device reported invalid CHS sector 0
sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sdc] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 2:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 b6 8c 80 c0 00 00 80 00
end_request: I/O error, dev sdc, sector 3062661312
raid5:md0: read error not correctable (sector 3062661248 on sdc1).
raid5: Disk failure on sdc1, disabling device.
raid5: Operation continuing on 1 devices.
raid5:md0: read error not correctable (sector 3062661256 on sdc1).
raid5:md0: read error not correctable (sector 3062661264 on sdc1).
raid5:md0: read error not correctable (sector 3062661272 on sdc1).
raid5:md0: read error not correctable (sector 3062661280 on sdc1).
raid5:md0: read error not correctable (sector 3062661288 on sdc1).
raid5:md0: read error not correctable (sector 3062661296 on sdc1).
raid5:md0: read error not correctable (sector 3062661304 on sdc1).
raid5:md0: read error not correctable (sector 3062661312 on sdc1).
raid5:md0: read error not correctable (sector 3062661320 on sdc1).
ata3: EH complete
ata2.00: configured for UDMA/133
ata2.00: device reported invalid CHS sector 0
sd 1:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 1:0:0:0: [sdb] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 1:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
sd 1:0:0:0: [sdb] CDB: cdb[0]=0x28: 28 00 b6 8c 80 c0 00 00 80 00
end_request: I/O error, dev sdb, sector 3062661312
raid5: Disk failure on sdb1, disabling device.
raid5: Operation continuing on 0 devices.
ata2: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: failed command: FLUSH CACHE EXT
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: failed command: FLUSH CACHE EXT
ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:60:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: configured for UDMA/133
ata2.00: retrying FLUSH 0xea Emask 0x4
ata3: link is slow to respond, please be patient (ready=-19)
ata3: SRST failed (errno=-16)
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/133
ata3.00: retrying FLUSH 0xea Emask 0x4
ata2.00: qc timeout (cmd 0xea)
ata2.00: FLUSH failed Emask 0x4
ata2: hard resetting link
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: configured for UDMA/133
ata2.00: retrying FLUSH 0xea Emask 0x4
ata3.00: qc timeout (cmd 0xea)
ata3.00: FLUSH failed Emask 0x4
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/133
ata3.00: retrying FLUSH 0xea Emask 0x4
ata2.00: qc timeout (cmd 0xea)
ata2.00: FLUSH failed Emask 0x4
ata2.00: limiting speed to UDMA/133:PIO3
ata2: hard resetting link
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: configured for UDMA/133
ata2.00: retrying FLUSH 0xea Emask 0x4
ata3.00: qc timeout (cmd 0xea)
ata3.00: FLUSH failed Emask 0x4
ata3.00: limiting speed to UDMA/133:PIO3
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/133
ata3.00: retrying FLUSH 0xea Emask 0x4
INFO: task md0_raid5:1268 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
md0_raid5     D c116c972     0  1268      2 0x00000000
 f7315b80 00000046 00000000 c116c972 01e08780 00000000 f6c6e000 f6c6e000
 f6c6e1c0 00000000 c1299c86 00000000 f7315b80 c102bc8c f6c6e1c0 f6c6e1c0
 f6c6e010 0003e73d c129a4fa 0003e73c 00000000 00000001 00000002 00000000
Call Trace:
 [<c116c972>] ? submit_bio+0x8c/0x92
 [<c1299c86>] ? md_super_wait+0x7c/0x8d
 [<c102bc8c>] ? autoremove_wake_function+0x0/0x2d
 [<c129a4fa>] ? md_update_sb+0x2fc/0x36a
 [<c129e385>] ? md_check_recovery+0x191/0x3eb
 [<c12947fe>] ? raid5d+0x11/0x2ef
 [<c1294ad8>] ? raid5d+0x2eb/0x2ef
 [<c129f16a>] ? md_thread+0xae/0xc5
 [<c102bc8c>] ? autoremove_wake_function+0x0/0x2d
 [<c129f0bc>] ? md_thread+0x0/0xc5
 [<c102bb45>] ? kthread+0x60/0x67
 [<c102bae5>] ? kthread+0x0/0x67
 [<c1002a76>] ? kernel_thread_helper+0x6/0x10
ata2.00: qc timeout (cmd 0xea)
ata2.00: FLUSH failed Emask 0x4
ata2.00: disabled
ata2.00: device reported invalid CHS sector 0
ata2: hard resetting link
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2: EH complete
sd 1:0:0:0: [sdb] Unhandled error code
sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
sd 1:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 e8 e0 87 c0 00 00 08 00
end_request: I/O error, dev sdb, sector 3907028928
end_request: I/O error, dev sdb, sector 3907028928
md: super_written gets error=-5, uptodate=0
sd 1:0:0:0: [sdb] READ CAPACITY(16) failed
sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
sd 1:0:0:0: [sdb] Sense not available.
sd 1:0:0:0: [sdb] READ CAPACITY failed
sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
sd 1:0:0:0: [sdb] Sense not available.
sd 1:0:0:0: [sdb] Write Protect is on
sd 1:0:0:0: [sdb] Mode Sense: d5 ea 86 ac
sd 1:0:0:0: [sdb] Asking for cache data failed
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sdb: detected capacity change from 2000398934016 to 0
ata3.00: qc timeout (cmd 0xea)
ata3.00: FLUSH failed Emask 0x4
ata3.00: disabled
ata3.00: device reported invalid CHS sector 0
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3: EH complete
sd 2:0:0:0: [sdc] Unhandled error code
sd 2:0:0:0: [sdc] Result: hostbyte=0x04 driverbyte=0x00
sd 2:0:0:0: [sdc] CDB: cdb[0]=0x2a: 2a 00 e8 e0 87 c0 00 00 08 00
end_request: I/O error, dev sdc, sector 3907028928
end_request: I/O error, dev sdc, sector 3907028928
md: super_written gets error=-5, uptodate=0
RAID5 conf printout:
 --- rd:4 wd:0
 disk 0, o:0, dev:sda1
 disk 1, o:0, dev:sdb1
 disk 2, o:0, dev:sdc1
 disk 3, o:0, dev:sdd1
RAID5 conf printout:
 --- rd:4 wd:0
 disk 0, o:0, dev:sda1
 disk 1, o:0, dev:sdb1
 disk 2, o:0, dev:sdc1
RAID5 conf printout:
 --- rd:4 wd:0
 disk 0, o:0, dev:sda1
 disk 1, o:0, dev:sdb1
 disk 2, o:0, dev:sdc1
RAID5 conf printout:
 --- rd:4 wd:0
 disk 0, o:0, dev:sda1
 disk 1, o:0, dev:sdb1
RAID5 conf printout:
 --- rd:4 wd:0
 disk 0, o:0, dev:sda1
 disk 1, o:0, dev:sdb1
RAID5 conf printout:
 --- rd:4 wd:0
 disk 0, o:0, dev:sda1
RAID5 conf printout:
 --- rd:4 wd:0
 disk 0, o:0, dev:sda1
RAID5 conf printout:
 --- rd:4 wd:0
sd 2:0:0:0: [sdc] READ CAPACITY(16) failed
sd 2:0:0:0: [sdc] Result: hostbyte=0x04 driverbyte=0x00
sd 2:0:0:0: [sdc] Sense not available.
sd 2:0:0:0: [sdc] READ CAPACITY failed
sd 2:0:0:0: [sdc] Result: hostbyte=0x04 driverbyte=0x00
sd 2:0:0:0: [sdc] Sense not available.
sd 2:0:0:0: [sdc] Write Protect is on
sd 2:0:0:0: [sdc] Mode Sense: 08 49 19 ac
sd 2:0:0:0: [sdc] Asking for cache data failed
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sdc: detected capacity change from 2000398934016 to 0
r8169 0000:01:09.0: eth1: link up
metapage_read_end_io: I/O error
metapage_read_end_io: I/O error
metapage_read_end_io: I/O error
metapage_read_end_io: I/O error
metapage_read_end_io: I/O error
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
metapage_read_end_io: I/O error
metapage_read_end_io: I/O error
metapage_read_end_io: I/O error
metapage_read_end_io: I/O error
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up
r8169 0000:01:09.0: eth1: link up