dmesg

dmesg (text/plain), 38.76 KB, created by mikopp on 2010-10-23 15:40:29 UTC

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-gentoo (root@mkopp) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #1 SMP Thu Oct 21 18:13:43 CEST 2010
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 0000000000095c00 (usable)
 BIOS-e820: 0000000000095c00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000db65f000 (usable)
 BIOS-e820: 00000000db65f000 - 00000000db67f000 (ACPI data)
 BIOS-e820: 00000000db67f000 - 00000000db76f000 (ACPI NVS)
 BIOS-e820: 00000000db76f000 - 00000000dc000000 (reserved)
 BIOS-e820: 00000000ddc00000 - 00000000e0000000 (reserved)
 BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x220000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0C0000000 mask FE0000000 write-back
  3 base 0DC000000 mask FFC000000 uncachable
  4 base 100000000 mask F00000000 write-back
  5 base 200000000 mask FE0000000 write-back
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000dc000000 - 0000000100000000 (usable) ==> (reserved)
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000001000 (reserved)
 modified: 0000000000001000 - 0000000000002000 (usable)
 modified: 0000000000002000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 0000000000095c00 (usable)
 modified: 0000000000095c00 - 00000000000a0000 (reserved)
 modified: 00000000000e0000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 00000000db65f000 (usable)
 modified: 00000000db65f000 - 00000000db67f000 (ACPI data)
 modified: 00000000db67f000 - 00000000db76f000 (ACPI NVS)
 modified: 00000000db76f000 - 00000000dc000000 (reserved)
 modified: 00000000ddc00000 - 00000000e0000000 (reserved)
 modified: 00000000f8000000 - 00000000fc000000 (reserved)
 modified: 00000000fec00000 - 00000000fec01000 (reserved)
 modified: 00000000fed10000 - 00000000fed14000 (reserved)
 modified: 00000000fed18000 - 00000000fed1a000 (reserved)
 modified: 00000000fed1c000 - 00000000fed20000 (reserved)
 modified: 00000000fee00000 - 00000000fee01000 (reserved)
 modified: 00000000ff800000 - 0000000100000000 (reserved)
 modified: 0000000100000000 - 0000000220000000 (usable)
initial memory mapped : 0 - 01c00000
init_memory_mapping: 0000000000000000-0000000037bfe000
 0000000000 - 0000200000 page 4k
 0000200000 - 0037a00000 page 2M
 0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 15000-1a000
ACPI: RSDP 000fe300 00024 (v02 DELL  )
ACPI: XSDT db67de18 0006C (v01 DELL    E2      06222004 MSFT 00010013)
ACPI: FACP db75fc18 000F4 (v04 DELL    E2      06222004 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40, using 32 (20100702/tbfadt-486)
ACPI: DSDT db750018 09760 (v01 DELL    E2      00001001 INTL 20080729)
ACPI: FACS db76bf40 00040
ACPI: APIC db67cf18 0008C (v02 DELL    E2      06222004 MSFT 00010013)
ACPI: TCPA db76dd18 00032 (v02                 00000000      00000000)
ACPI: MCFG db76dc98 0003C (v01 A M I  GMCH945. 06222004 MSFT 00000097)
ACPI: HPET db76dc18 00038 (v01 DELL    E2      00000001 ASL  00000061)
ACPI: BOOT db76db98 00028 (v01 DELL   E2       06222004 AMI  00010013)
ACPI: SLIC db766818 00176 (v03 DELL    E2      06222004 MSFT 00010013)
ACPI: SSDT db75e018 009F1 (v01  PmRef    CpuPm 00003000 INTL 20080729)
ACPI: DMAR db75ff18 000B8 (v01 INTEL  CP_DALE  00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
7812MB HIGHMEM available.
891MB LOWMEM available.
  mapped low ram: 0 - 37bfe000
  low ram: 0 - 37bfe000
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  Normal   0x00001000 -> 0x00037bfe
  HighMem  0x00037bfe -> 0x00220000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000001 -> 0x00000002
    0: 0x00000010 -> 0x00000095
    0: 0x00000100 -> 0x000db65f
    0: 0x00100000 -> 0x00220000
On node 0 totalpages: 2078181
free_area_init_node: node 0, pgdat c1794280, node_mem_map c188e020
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3942 pages, LIFO batch:0
  Normal zone: 1752 pages used for memmap
  Normal zone: 222502 pages, LIFO batch:31
  HighMem zone: 15625 pages used for memmap
  HighMem zone: 1834328 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
8 Processors exceeds NR_CPUS limit of 4
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [16000 - 167ff]
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 0000000000095000 - 0000000000096000
PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @c5e00000 s30656 r0 d22592 u524288
pcpu-alloc: s30656 r0 d22592 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2060772
Kernel command line: /dev/sda3 video=intelfb:mode=1366x768
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (52 early reservations)
  #1 [0000001000 - 0000002000]   EX TRAMPOLINE
  #2 [0001000000 - 000187dbf4]   TEXT DATA BSS
  #3 [0000095c00 - 0000100000]   BIOS reserved
  #4 [000187e000 - 000188c1c5]             BRK
  #5 [0000010000 - 0000011000]      TRAMPOLINE
  #6 [0000011000 - 0000015000]     ACPI WAKEUP
  #7 [0000015000 - 0000016000]         PGTABLE
  #8 [000188d000 - 000188e000]         BOOTMEM
  #9 [000188e000 - 0005c8e000]         BOOTMEM
  #10 [000187dc00 - 000187dc04]         BOOTMEM
  #11 [000187dc40 - 000187dd00]         BOOTMEM
  #12 [000187dd00 - 000187dda8]         BOOTMEM
  #13 [0005c8e000 - 0005c91000]         BOOTMEM
  #14 [000188c200 - 000188c7bc]         BOOTMEM
  #15 [0005c91000 - 0005c9d000]         BOOTMEM
  #16 [000187ddc0 - 000187dded]         BOOTMEM
  #17 [000187de00 - 000187de2f]         BOOTMEM
  #18 [000188c7c0 - 000188ca6c]         BOOTMEM
  #19 [000187de40 - 000187de80]         BOOTMEM
  #20 [000187de80 - 000187dec0]         BOOTMEM
  #21 [000187dec0 - 000187df00]         BOOTMEM
  #22 [000187df00 - 000187df40]         BOOTMEM
  #23 [000187df40 - 000187df80]         BOOTMEM
  #24 [000187df80 - 000187dfc0]         BOOTMEM
  #25 [000187dfc0 - 000187e000]         BOOTMEM
  #26 [000188ca80 - 000188cac0]         BOOTMEM
  #27 [000188cac0 - 000188cb00]         BOOTMEM
  #28 [000188cb00 - 000188cb40]         BOOTMEM
  #29 [000188cb40 - 000188cb80]         BOOTMEM
  #30 [000188cb80 - 000188cbc0]         BOOTMEM
  #31 [000188cbc0 - 000188cc00]         BOOTMEM
  #32 [000188cc00 - 000188cc40]         BOOTMEM
  #33 [000188cc40 - 000188cc80]         BOOTMEM
  #34 [000188cc80 - 000188ccc0]         BOOTMEM
  #35 [000188ccc0 - 000188ccd0]         BOOTMEM
  #36 [000188cd00 - 000188cd10]         BOOTMEM
  #37 [000188cd40 - 000188cd66]         BOOTMEM
  #38 [000188cd80 - 000188cda6]         BOOTMEM
  #39 [0005e00000 - 0005e0d000]         BOOTMEM
  #40 [0005e80000 - 0005e8d000]         BOOTMEM
  #41 [0005f00000 - 0005f0d000]         BOOTMEM
  #42 [0005f80000 - 0005f8d000]         BOOTMEM
  #43 [000188cdc0 - 000188cdc4]         BOOTMEM
  #44 [000188ce00 - 000188ce04]         BOOTMEM
  #45 [000188ce40 - 000188ce50]         BOOTMEM
  #46 [000188ce80 - 000188ce90]         BOOTMEM
  #47 [000188cec0 - 000188cf58]         BOOTMEM
  #48 [000188cf80 - 000188cfb8]         BOOTMEM
  #49 [0005c9d000 - 0005ca1000]         BOOTMEM
  #50 [0005ca1000 - 0005d21000]         BOOTMEM
  #51 [0005d21000 - 0005d61000]         BOOTMEM
Initializing HighMem for node 0 (00037bfe:00220000)
Memory: 8233252k/8912896k available (5731k kernel code, 79472k reserved, 2059k data, 416k init, 7399812k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff67000 - 0xfffff000   ( 608 kB)
    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
      .init : 0xc179c000 - 0xc1804000   ( 416 kB)
      .data : 0xc1598e72 - 0xc179bc9c   (2059 kB)
      .text : 0xc1000000 - 0xc1598e72   (5731 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304 nr_irqs:712
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2393.581 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.16 BogoMIPS (lpj=9574324)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
ACPI: Core revision 20100702
spurious 8259A interrupt: IRQ7.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM) i5 CPU       M 520  @ 2.40GHz stepping 05
Booting Node   0, Processors  #1
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
 #2
Initializing CPU#2
CPU2: Thermal monitoring handled by SMI
 #3 Ok.
Initializing CPU#3
CPU3: Thermal monitoring handled by SMI
Brought up 4 CPUs
Total of 4 processors activated (19150.83 BogoMIPS).
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT db7ea918 003F0 (v01  PmRef  Cpu0Ist 00003000 INTL 20080729)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 003F0 (v01  PmRef  Cpu0Ist 00003000 INTL 20080729)
ACPI: SSDT db7e8018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20080729)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20080729)
ACPI: SSDT db7e9a98 00303 (v01  PmRef    ApIst 00003000 INTL 20080729)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20080729)
ACPI: SSDT db7e7d98 00119 (v01  PmRef    ApCst 00003000 INTL 20080729)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20080729)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f 
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0x60b0-0x60b7]
pci 0000:00:19.0: reg 10: [mem 0xf5400000-0xf541ffff]
pci 0000:00:19.0: reg 14: [mem 0xf5480000-0xf5480fff]
pci 0000:00:19.0: reg 18: [io  0x6040-0x605f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xf5470000-0xf54703ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf5460000-0xf5463fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xf5450000-0xf54503ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0x6090-0x6097]
pci 0000:00:1f.2: reg 14: [io  0x6080-0x6083]
pci 0000:00:1f.2: reg 18: [io  0x6070-0x6077]
pci 0000:00:1f.2: reg 1c: [io  0x6060-0x6063]
pci 0000:00:1f.2: reg 20: [io  0x6020-0x603f]
pci 0000:00:1f.2: reg 24: [mem 0xf5440000-0xf54407ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf5430000-0xf54300ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x6000-0x601f]
pci 0000:00:1f.6: reg 10: [mem 0xf5420000-0xf5420fff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf53fffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xf2c00000-0xf2c01fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xf2c00000-0xf3ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xf1800000-0xf18000ff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.2:   bridge window [mem 0xf1800000-0xf2bfffff]
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 04-09]
pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf17fffff]
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f 
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
pci_bus 0000:3f: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.23.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 0000000000002000 - 000000000000ffff 
reserve RAM buffer: 0000000000095c00 - 000000000009ffff 
reserve RAM buffer: 00000000db65f000 - 00000000dbffffff 
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x1000-0x1003] has been reserved
system 00:05: [io  0x1004-0x1013] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0x0400-0x047f] has been reserved
system 00:05: [io  0x0500-0x057f] has been reserved
system 00:05: [io  0x164e-0x164f] has been reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xf54c0000-0xf54c0fff] has been reserved
pci 0000:00:1c.0: BAR 9: assigned [mem 0xf5500000-0xf56fffff 64bit pref]
pci 0000:00:1c.1: BAR 9: assigned [mem 0xf5700000-0xf58fffff 64bit pref]
pci 0000:00:1c.2: BAR 9: assigned [mem 0xf5900000-0xf5afffff 64bit pref]
pci 0000:00:1c.3: BAR 9: assigned [mem 0xf5b00000-0xf5cfffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf53fffff]
pci 0000:00:1c.0:   bridge window [mem 0xf5500000-0xf56fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xf2c00000-0xf3ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xf5700000-0xf58fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.2:   bridge window [mem 0xf1800000-0xf2bfffff]
pci 0000:00:1c.2:   bridge window [mem 0xf5900000-0xf5afffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04-09]
pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf17fffff]
pci 0000:00:1c.3:   bridge window [mem 0xf5b00000-0xf5cfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf53fffff]
pci_bus 0000:01: resource 2 [mem 0xf5500000-0xf56fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xf2c00000-0xf3ffffff]
pci_bus 0000:02: resource 2 [mem 0xf5700000-0xf58fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xf1800000-0xf2bfffff]
pci_bus 0000:03: resource 2 [mem 0xf5900000-0xf5afffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf17fffff]
pci_bus 0000:04: resource 2 [mem 0xf5b00000-0xf5cfffff 64bit pref]
pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 7 [mem 0xe0000000-0xfeafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Simple Boot Flag at 0xf1 set to 0x1
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
microcode: Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
Scanning for low memory corruption every 60 seconds
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
fuse init (API version 7.15)
msgmni has been set to 1627
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d 
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
  alloc irq_desc for 40 on node -1
  alloc kstat_irqs on node -1
i915 0000:00:02.0: irq 40 for MSI/MSI-X
[drm] set up 31M of stolen space
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
Console: switching to colour frame buffer device 128x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:37: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  alloc irq_desc for 41 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf5440000 port 0xf5440100 irq 41
ata2: SATA max UDMA/133 abar m2048@0xf5440000 port 0xf5440180 irq 41
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf5440000 port 0xf5440300 irq 41
ata6: SATA max UDMA/133 abar m2048@0xf5440000 port 0xf5440380 irq 41
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
  alloc irq_desc for 20 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
  alloc irq_desc for 42 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 5c:26:0a:0d:82:f8
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 4041ff-0ff
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:02:00.0: setting latency timer to 64
iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
  alloc irq_desc for 43 on node -1
  alloc kstat_irqs on node -1
iwlagn 0000:02:00.0: irq 43 for MSI/MSI-X
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5470000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.36-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 17, io mem 0xf5450000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.36-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
ata5: SATA link down (SStatus 0 SControl 300)
i8042.c: Warning: Keylock active.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io  0x6000-0x601f] conflicts with ACPI region SMBI [??? 0x00006000-0x0000600f flags 0x49]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
coretemp coretemp.0: TjMax is 105 C.
coretemp coretemp.1: TjMax is 105 C.
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
cpuidle: using governor ladder
cpuidle: using governor menu
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
sdhci: Secure Digital Host Controller Interface driver
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
sdhci: Copyright(c) Pierre Ossman
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 1)
sdhci-pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:03:00.0: setting latency timer to 64
ata2.00: ATAPI: TSSTcorp DVD-ROM TS-U333A, D100, max UDMA/100
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  alloc irq_desc for 44 on node -1
  alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
ata2.00: applying bridge limits
ata1.00: ATA-8: ST9320423AS, 0002SDM1, max UDMA/133
ata2.00: configured for UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST9320423AS      0002 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            TSSTcorp DVD-ROM TS-U333A D100 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
usbcore: registered new interface driver snd-usb-audio
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ALSA device list:
  #0: HDA Intel at 0xf5460000 irq 44
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
L2TP core driver, V2.0
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Registering the dns_resolver key type
Using IPI No-Shortcut mode
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input10
EXT3-fs: barriers not enabled
usb 1-1.4: new high speed USB device using ehci_hcd and address 3
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda3): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 416k freed
usb 1-1.4: New USB device found, idVendor=0461, idProduct=4db1
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: Laptop_Integrated_Webcam_2M
usb 1-1.4: Manufacturer: CN0F5CWW7866409A02TDA01
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0461:4db1)
input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input11
usb 2-1.7: new full speed USB device using ehci_hcd and address 3
usb 2-1.7: New USB device found, idVendor=413c, idProduct=8187
usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.7: Product: DW375 Bluetooth Module
usb 2-1.7: Manufacturer: Dell Computer Corp
usb 2-1.7: SerialNumber: 1C659D02DEE0
usb 2-1.8: new full speed USB device using ehci_hcd and address 4
usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.8: Product: 5880
usb 2-1.8: Manufacturer: Broadcom Corp
usb 2-1.8: SerialNumber: 0123456789ABCD
usb 2-1.8: config 0 descriptor??
udev: starting version 151
udevd (1227): /proc/1227/oom_adj is deprecated, please use /proc/1227/oom_score_adj instead.
iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532
phy0: Selected rate control algorithm 'iwl-agn-rs'
EXT3-fs (sda3): using internal journal
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda4): using internal journal
EXT3-fs (sda4): mounted filesystem with writeback data mode
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with writeback data mode
Adding 2048280k swap on /dev/sda2.  Priority:-1 extents:1 across:2048280k 
[drm] Cannot find any crtc or sizes - going 1024x768
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
wlan0: authenticate with 00:14:6c:16:cb:72 (try 1)
wlan0: authenticated
wlan0: associate with 00:14:6c:16:cb:72 (try 1)
wlan0: RX AssocResp from 00:14:6c:16:cb:72 (capab=0x431 status=0 aid=1)
wlan0: associated
ata1.00: configured for UDMA/133
ata1: EH complete