### This file is automatically generated by update-modules # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modprobe.d and read # the manpage for update-modules(8). # alias net-pf-3 off alias net-pf-4 off alias net-pf-5 off alias net-pf-6 off alias net-pf-9 off alias net-pf-10 off alias net-pf-11 off alias net-pf-19 off alias char-major-10-175 agpgart alias char-major-10-200 tun alias char-major-81-* bttv alias char-major-108-* ppp_generic alias /dev/ppp ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate alias loop-xfer-gen-0 loop_gen alias loop-xfer-3 loop_fish2 alias loop-xfer-gen-10 loop_gen alias cipher-2 des alias cipher-3 fish2 alias cipher-4 blowfish alias cipher-6 idea alias cipher-7 serp6f alias cipher-8 mars6 alias cipher-11 rc62 alias cipher-15 dfc2 alias cipher-16 rijndael alias cipher-17 rc5 alias char-major-89-* i2c-dev ### update-modules: start processing /etc/modprobe.d/aliases.conf # Aliases to tell insmod/modprobe which modules to use # Uncomment the network protocols you don't want loaded: # alias net-pf-1 off # Unix # alias net-pf-2 off # IPv4 # alias net-pf-3 off # Amateur Radio AX.25 # alias net-pf-4 off # IPX # alias net-pf-5 off # DDP / appletalk # alias net-pf-6 off # Amateur Radio NET/ROM # alias net-pf-9 off # X.25 # alias net-pf-10 off # IPv6 # alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP # alias net-pf-19 off # Acorn Econet alias char-major-10-175 agpgart alias char-major-10-200 tun alias char-major-81 bttv alias char-major-108 ppp_generic alias /dev/ppp ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate # Crypto modules (see http://www.kerneli.org/) alias loop-xfer-gen-0 loop_gen alias loop-xfer-3 loop_fish2 alias loop-xfer-gen-10 loop_gen alias cipher-2 des alias cipher-3 fish2 alias cipher-4 blowfish alias cipher-6 idea alias cipher-7 serp6f alias cipher-8 mars6 alias cipher-11 rc62 alias cipher-15 dfc2 alias cipher-16 rijndael alias cipher-17 rc5 # Support for i2c and lm_sensors alias char-major-89 i2c-dev ### update-modules: end processing /etc/modprobe.d/aliases.conf ### update-modules: start processing /etc/modprobe.d/alsa.conf # --- BEGIN: Generated by ALSACONF, do not edit. --- # --- ALSACONF version 1.0.21 --- alias snd-card-0 snd-hda-intel alias sound-slot-0 snd-hda-intel # --- END: Generated by ALSACONF, do not edit. --- ### update-modules: end processing /etc/modprobe.d/alsa.conf ### update-modules: start processing /etc/modprobe.d/blacklist.conf # This file lists modules which will not be loaded by udev, # not at coldplugging and not on hotplug events. # Add your own entries to this file # in the format "blacklist " # Some examples: # evbug is a debug tool and should be loaded explicitly blacklist evbug # Autoloading eth1394 most of the time re-orders your network # interfaces, and with buggy kernel 2.6.21, udev persistent-net # is not able to rename these devices, so you get eth?_rename devices # plus an exceeded 30sec boot timeout blacklist eth1394 # You probably want this to not get the console beep loud on every tab :) #blacklist pcspkr # these drivers are very simple, the HID drivers are usually preferred #blacklist usbmouse #blacklist usbkbd # Sometimes loading a framebuffer driver at boot gets the console black #install pci:v*d*sv*sd*bc03sc*i* /bin/true # hplip and cups 1.4+ use raw USB devices, so it requires usblp not be loaded #blacklist usblp ### update-modules: end processing /etc/modprobe.d/blacklist.conf ### update-modules: start processing /etc/modprobe.d/i386.conf alias parport_lowlevel parport_pc alias char-major-10-144 nvram alias binfmt-0064 binfmt_aout alias char-major-10-135 rtc ### update-modules: end processing /etc/modprobe.d/i386.conf ### update-modules: start processing /etc/modprobe.d/iwl3945.conf options iwl3945 fw_restart3945=1 ### update-modules: end processing /etc/modprobe.d/iwl3945.conf ### update-modules: start processing /etc/modprobe.d/nvidia.conf # Nvidia drivers support alias char-major-195 nvidia alias /dev/nvidiactl char-major-195 # To tweak the driver the following options can be used, note that # you should be careful, as it could cause instability!! For more # options see /usr/share/doc/nvidia-drivers-195.36.24/README # # !!! SECURITY WARNING !!! # DO NOT MODIFY OR REMOVE THE DEVICE FILE RELATED OPTIONS UNLESS YOU KNOW # WHAT YOU ARE DOING. # ONLY ADD TRUSTED USERS TO THE VIDEO GROUP, THESE USERS MAY BE ABLE TO CRASH, # COMPROMISE, OR IRREPARABLY DAMAGE THE MACHINE. options nvidia NVreg_DeviceFileMode=432 NVreg_DeviceFileUID=0 NVreg_DeviceFileGID=27 NVreg_ModifyDeviceFiles=1 ### update-modules: end processing /etc/modprobe.d/nvidia.conf ### update-modules: start processing /etc/modprobe.d/pnp-aliases.conf # /etc/modprobe.d/pnp-aliases # # These aliases are used by this udev-rule: # SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN+="/bin/sh -c '/sbin/modprobe -a $$(while read id; do echo pnp:d$$id; done < /sys$devpath/id)'" # # They should help to autoload drivers used by various pnp-devices # (if not blacklisted somewhere else) # alias pnp:dPNP0510 irtty-sir alias pnp:dPNP0511 irtty-sir alias pnp:dPNP0700 floppy alias pnp:dPNP0800 pcspkr alias pnp:dPNP0b00 rtc alias pnp:dPNP0303 atkbd alias pnp:dPNP0f13 psmouse alias pnp:dPNPb02f analog ### update-modules: end processing /etc/modprobe.d/pnp-aliases.conf ### update-modules: start processing /etc/modprobe.d/ppp.conf alias char-major-108 ppp_generic alias /dev/ppp ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-13 n_hdlc alias tty-ldisc-14 ppp_synctty alias ppp-compress-18 ppp_mppe alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate alias net-pf-24 pppoe ### update-modules: end processing /etc/modprobe.d/ppp.conf