Linux version 2.6.35-tuxonice-r1 (root@belkin) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #1 SMP PREEMPT Tue Aug 31 21:04:31 CEST 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data) BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.3 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x3ffd0 max_arch_pfn = 0x1000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled initial memory mapped : 0 - 01a00000 init_memory_mapping: 0000000000000000-0000000037bfe000 0000000000 - 0000200000 page 4k 0000200000 - 0037a00000 page 2M 0037a00000 - 0037bfe000 page 4k kernel direct mapping tables up to 37bfe000 @ 15000-1a000 ACPI: RSDP 000f79b0 00014 (v00 ACPIAM) ACPI: RSDT 3ffd0000 00038 (v01 A M I OEMRSDT 04000626 MSFT 00000097) ACPI: FACP 3ffd0200 00084 (v02 A M I OEMFACP 04000626 MSFT 00000097) ACPI: DSDT 3ffd0460 07C97 (v01 A6JC0 A6JC0211 00000211 INTL 02002026) ACPI: FACS 3ffde000 00040 ACPI: APIC 3ffd0390 0005C (v01 A M I OEMAPIC 04000626 MSFT 00000097) ACPI: MCFG 3ffd03f0 0003C (v01 A M I OEMMCFG 04000626 MSFT 00000097) ACPI: BOOT 3ffd0430 00028 (v01 A M I OEMBOOT 04000626 MSFT 00000097) ACPI: OEMB 3ffde040 00046 (v01 A M I AMI_OEM 04000626 MSFT 00000097) ACPI: Local APIC address 0xfee00000 131MB HIGHMEM available. 891MB LOWMEM available. mapped low ram: 0 - 37bfe000 low ram: 0 - 37bfe000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x00037bfe HighMem 0x00037bfe -> 0x0003ffd0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0003ffd0 On node 0 totalpages: 261983 free_area_init_node: node 0, pgdat c1485a00, node_mem_map c1539200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1752 pages used for memmap Normal zone: 222502 pages, LIFO batch:31 HighMem zone: 264 pages used for memmap HighMem zone: 33482 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 40000000:bee00000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 early_res array is doubled to 64 at [16000 - 167ff] PERCPU: Embedded 13 pages/cpu @c1e00000 s29696 r0 d23552 u1048576 pcpu-alloc: s29696 r0 d23552 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259935 Kernel command line: root=/dev/sda1 resume=/dev/sda3 vga=0x318 video=vesafb:mtrr:3,1024x768-32@60,ywrap quiet PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Subtract (40 early reservations) #1 [0000001000 - 0000002000] EX TRAMPOLINE #2 [0001000000 - 0001529738] TEXT DATA BSS #3 [000009fc00 - 0000100000] BIOS reserved #4 [000152a000 - 0001537138] BRK #5 [0000010000 - 0000011000] TRAMPOLINE #6 [0000011000 - 0000015000] ACPI WAKEUP #7 [0000015000 - 0000016000] PGTABLE #8 [0001538000 - 0001539000] BOOTMEM #9 [0001539000 - 0001d39000] BOOTMEM #10 [0001529780 - 0001529784] BOOTMEM #11 [0001529800 - 00015298c0] BOOTMEM #12 [0001529900 - 0001529954] BOOTMEM #13 [0001d39000 - 0001d3c000] BOOTMEM #14 [0001529980 - 0001529990] BOOTMEM #15 [0001537180 - 0001537d80] BOOTMEM #16 [0001529a00 - 0001529a2f] BOOTMEM #17 [0001529a80 - 0001529bc4] BOOTMEM #18 [0001529c00 - 0001529c40] BOOTMEM #19 [0001529c80 - 0001529cc0] BOOTMEM #20 [0001529d00 - 0001529d40] BOOTMEM #21 [0001529d80 - 0001529dc0] BOOTMEM #22 [0001529e00 - 0001529e40] BOOTMEM #23 [0001529e80 - 0001529ec0] BOOTMEM #24 [0001529f00 - 0001529f40] BOOTMEM #25 [0001529f80 - 0001529fc0] BOOTMEM #26 [0001537d80 - 0001537d90] BOOTMEM #27 [0001537e00 - 0001537e59] BOOTMEM #28 [0001537e80 - 0001537ed9] BOOTMEM #29 [0001e00000 - 0001e0d000] BOOTMEM #30 [0001f00000 - 0001f0d000] BOOTMEM #31 [0001537f00 - 0001537f04] BOOTMEM #32 [0001537f80 - 0001537f84] BOOTMEM #33 [0001d3e000 - 0001d3e008] BOOTMEM #34 [0001d3e080 - 0001d3e088] BOOTMEM #35 [0001d3e100 - 0001d3e1a0] BOOTMEM #36 [0001d3e200 - 0001d3e248] BOOTMEM #37 [0001d3e280 - 0001d42280] BOOTMEM #38 [0001d42280 - 0001dc2280] BOOTMEM #39 [0001e0d000 - 0001e4d000] BOOTMEM Initializing HighMem for node 0 (00037bfe:0003ffd0) Memory: 1033464k/1048384k available (3415k kernel code, 14468k reserved, 1228k data, 348k init, 134984k highmem) virtual kernel memory layout: fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) pkmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) .init : 0xc148a000 - 0xc14e1000 ( 348 kB) .data : 0xc1355f01 - 0xc1489244 (1228 kB) .text : 0xc1000000 - 0xc1355f01 (3415 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptable hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:320 Console: colour dummy device 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 1662.170 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.34 BogoMIPS (lpj=1662170) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: Core events, core PMU driver. ... version: 1 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 0 ... event mask: 0000000000000003 ACPI: Core revision 20100428 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 Booting Node 0, Processors #1 Ok. Initializing CPU#1 Brought up 2 CPUs Total of 2 processors activated (6648.90 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: SSDT 3ffd8100 002B7 (v01 AMI CPU1PM 00000001 INTL 02002026) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 002B7 (v01 AMI CPU1PM 00000001 INTL 02002026) ACPI Warning: Incorrect checksum in table [SSDT] - 0xCB, should be 0xEB (20100428/tbutils-314) ACPI: SSDT 3ffd83c0 002B7 (v01 AMI CPU2PM 00000001 INTL 02002026) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 002B7 (v01 AMI CPU2PM 00000001 INTL 02002026) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) PCI: Using MMCONFIG for extended config space ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [GFAN] (off) ACPI Warning: Incorrect checksum in table [SSDT] - 0xCB, should be 0xEB (20100428/tbutils-314) ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xffffffff] (ignored) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20: [io 0xec00-0xec1f] pci 0000:00:1d.1: reg 20: [io 0xe880-0xe89f] pci 0000:00:1d.2: reg 20: [io 0xe800-0xe81f] pci 0000:00:1d.3: reg 20: [io 0xe480-0xe49f] pci 0000:00:1d.7: reg 10: [mem 0xfebfbc00-0xfebfbfff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f) pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit] pci 0000:01:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:01.0: bridge window [mem 0xf9f00000-0xfdffffff] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff 64bit pref] pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff] pci 0000:02:00.0: reg 18: [mem 0xfe0ff000-0xfe0fffff 64bit] pci 0000:02:00.0: reg 30: [mem 0xfe0e0000-0xfe0effff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.0: bridge window [mem 0xfe000000-0xfe0fffff] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:00.0: reg 10: [mem 0xfe1ff000-0xfe1fffff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.3: PCI bridge to [bus 03-03] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.3: bridge window [mem 0xfe100000-0xfe1fffff] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:04:01.0: reg 10: [mem 0x00000000-0x00000fff] pci 0000:04:01.0: supports D1 D2 pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:01.0: PME# disabled pci 0000:04:01.1: reg 10: [mem 0xfeaff800-0xfeafffff] pci 0000:04:01.1: PME# supported from D0 D3hot D3cold pci 0000:04:01.1: PME# disabled pci 0000:04:01.2: reg 10: [mem 0xfeaff400-0xfeaff4ff] pci 0000:04:01.2: supports D1 D2 pci 0000:04:01.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:01.2: PME# disabled pci 0000:04:01.3: reg 10: [mem 0xfeaff000-0xfeaff0ff] pci 0000:04:01.3: supports D1 D2 pci 0000:04:01.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:01.3: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 04-05] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] pci 0000:00:1e.0: bridge window [mem 0xfe200000-0xfeafffff] pci 0000:00:1e.0: bridge window [mem 0xddf00000-0xdfefffff 64bit pref] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode) pci_bus 0000:05: [bus 05-08] partially hidden behind transparent bridge 0000:04 [bus 04-05] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000003ffd0000 - 000000003fffffff hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc Slow work thread pool: Starting up Slow work thread pool: Ready FS-Cache: Loaded pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: [io 0x0800-0x087f] has been reserved system 00:08: [io 0x0480-0x04bf] has been reserved system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved system 00:09: [mem 0xfff80000-0xffffffff] has been reserved system 00:0a: [mem 0xffc00000-0xfff7ffff] has been reserved system 00:0b: [io 0x0400-0x041f] has been reserved system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0b: [mem 0xfec10000-0xfec17fff] has been reserved system 00:0b: [mem 0xfec28000-0xfec2ffff] has been reserved system 00:0c: [mem 0xe0000000-0xe3ffffff] has been reserved system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0d: [mem 0x00100000-0x3fffffff] could not be reserved pci 0000:00:1c.0: BAR 9: assigned [mem 0x40000000-0x401fffff 64bit pref] pci 0000:00:1c.3: BAR 9: assigned [mem 0x40200000-0x403fffff 64bit pref] pci 0000:00:1c.3: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0xf9f00000-0xfdffffff] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.0: bridge window [mem 0xfe000000-0xfe0fffff] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 03-03] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.3: bridge window [mem 0xfe100000-0xfe1fffff] pci 0000:00:1c.3: bridge window [mem 0x40200000-0x403fffff 64bit pref] pci 0000:04:01.0: BAR 9: assigned [mem 0x44000000-0x47ffffff pref] pci 0000:04:01.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] pci 0000:04:01.0: BAR 0: assigned [mem 0xfe200000-0xfe200fff] pci 0000:04:01.0: BAR 0: set to [mem 0xfe200000-0xfe200fff] (PCI address [0xfe200000-0xfe200fff] pci 0000:04:01.0: BAR 7: assigned [io 0xd000-0xd0ff] pci 0000:04:01.0: BAR 8: assigned [io 0xd400-0xd4ff] pci 0000:04:01.0: CardBus bridge to [bus 05-08] pci 0000:04:01.0: bridge window [io 0xd000-0xd0ff] pci 0000:04:01.0: bridge window [io 0xd400-0xd4ff] pci 0000:04:01.0: bridge window [mem 0x44000000-0x47ffffff pref] pci 0000:04:01.0: bridge window [mem 0x48000000-0x4bffffff] pci 0000:00:1e.0: PCI bridge to [bus 04-05] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] pci 0000:00:1e.0: bridge window [mem 0xfe200000-0xfeafffff] pci 0000:00:1e.0: bridge window [mem 0xddf00000-0xdfefffff 64bit pref] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.3: enabling device (0106 -> 0107) pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xfdffffff] pci_bus 0000:01: resource 2 [mem 0xbdf00000-0xddefffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] pci_bus 0000:02: resource 1 [mem 0xfe000000-0xfe0fffff] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe1fffff] pci_bus 0000:03: resource 2 [mem 0x40200000-0x403fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfeafffff] pci_bus 0000:04: resource 2 [mem 0xddf00000-0xdfefffff 64bit pref] pci_bus 0000:04: resource 4 [io 0x0000-0xffff] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:05: resource 0 [io 0xd000-0xd0ff] pci_bus 0000:05: resource 1 [io 0xd400-0xd4ff] pci_bus 0000:05: resource 2 [mem 0x44000000-0x47ffffff pref] pci_bus 0000:05: resource 3 [mem 0x48000000-0x4bffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 64 Simple Boot Flag at 0x52 set to 0x1 highmem bounce pool size: 64 pages FS-Cache: Netfs 'nfs' registered for caching Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.14) msgmni has been set to 1754 io scheduler noop registered io scheduler deadline registered (default) pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.3: setting latency timer to 64 vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 6144k, total 131072k vesafb: mode is 1024x768x32, linelength=4096, pages=1 vesafb: protected mode interface info at c000:d740 vesafb: pmi: set display start = c00cd776, set palette = c00cd7e0 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536 vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC0] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] ACPI: Fan [FN00] (off) input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input4 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI: acpi_idle registered with cpuidle Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (67 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found loop: module loaded ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 ata2: port disabled. ignoring. i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram, hpet irqs i2c /dev entries driver coretemp coretemp.0: Unable to read TjMax from CPU. coretemp coretemp.0: TjMax is assumed as 100 C! coretemp coretemp.1: Unable to read TjMax from CPU. coretemp coretemp.1: TjMax is assumed as 100 C! cpuidle: using governor ladder cpuidle: using governor menu asus_laptop: Asus Laptop Support version 0.42 asus_laptop: A6JC model detected input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 ata1.00: ATA-7: FUJITSU MHV2100AT PL, 000000A0, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L532U, AS04, max UDMA/33 input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input6 Registered led device: asus::mail TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode TuxOnIce 3.1.1.1 (http://tuxonice.net) ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/33 ACPI: Battery Slot [BAT0] (battery present) scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100A 0000 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 scsi 0:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-L532U AS04 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 sr 0:0:1:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 TuxOnIce: No image found. registered taskstats version 1 REISERFS (device sda1): found reiserfs format "3.6" with standard journal REISERFS (device sda1): using ordered data mode REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda1): checking transaction log (sda1) REISERFS (device sda1): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 8:1. Freeing unused kernel memory: 348k freed udev: starting version 151 intel_rng: FWH not detected usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb cfg80211: Calling CRDA to update world regulatory domain uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ec00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.35-tuxonice-r1 uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.35-tuxonice-r1 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.35-tuxonice-r1 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000e480 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.35-tuxonice-r1 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: using broken periodic workaround ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfbc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.35-tuxonice-r1 ehci_hcd usb usb5: SerialNumber: 0000:00:1d.7 hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected firewire_ohci 0000:04:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: no MSI. Back to INTx. r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf8e4e000, 00:17:31:15:5a:78, XID 10000000 IRQ 16 firewire_ohci: Added fw-ohci device 0000:04:01.1, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x0 sdhci-pci 0000:04:01.2: SDHCI controller found [1180:0822] (rev 17) sdhci-pci 0000:04:01.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 sdhci-pci 0000:04:01.2: Will use DMA mode even though HW doesn't fully claim to support it. Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:04:01.2] using DMA yenta_cardbus 0000:04:01.0: CardBus bridge found [1043:1237] yenta_cardbus 0000:04:01.0: ISA IRQ mask 0x0cb8, PCI irq 17 yenta_cardbus 0000:04:01.0: Socket status: 30000006 pci_bus 0000:04: Raising subordinate bus# of parent bus (#04) from #05 to #08 yenta_cardbus 0000:04:01.0: pcmcia: parent PCI bridge window: [io 0xd000-0xdfff] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xdfff: excluding 0xd000-0xd0ff 0xd3b0-0xd3df 0xd400-0xd4ff 0xd7b0-0xd7df 0xdbb0-0xdbdf 0xdfb0-0xdfdf yenta_cardbus 0000:04:01.0: pcmcia: parent PCI bridge window: [mem 0xfe200000-0xfeafffff] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfe200000-0xfeafffff: excluding 0xfe200000-0xfe28ffff 0xfea70000-0xfeafffff yenta_cardbus 0000:04:01.0: pcmcia: parent PCI bridge window: [mem 0xddf00000-0xdfefffff 64bit pref] pcmcia_socket pcmcia_socket0: cs: memory probe 0xddf00000-0xdfefffff: excluding 0xddf00000-0xdfefffff usb 5-7: new high speed USB device using ehci_hcd and address 3 iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s iwl3945: Copyright(c) 2003-2010 Intel Corporation iwl3945 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 iwl3945 0000:03:00.0: setting latency timer to 64 usb 5-7: New USB device found, idVendor=0402, idProduct=5602 usb 5-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 5-7: Product: USB2.0 Camera iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG firewire_core: created device fw0: GUID 00e01800035307db, S400 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 usb 1-1: new low speed USB device using uhci_hcd and address 2 usb 1-1: New USB device found, idVendor=15ca, idProduct=00c3 usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 usb 1-1: Product: USB Optical Mouse phy0: Selected rate control algorithm 'iwl-3945-rs' Linux video capture interface: v2.00 usbcore: registered new interface driver hiddev input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input8 generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver gspca: main v2.9.0 registered gspca: probing 0402:5602 ALi m5602: Probing for a po1030 sensor ALi m5602: Probing for a mt9m111 sensor ALi m5602: Probing for a s5k4aa sensor ALi m5602: Probing for an ov9650 sensor ALi m5602: Detected an ov9650 sensor gspca: video0 created usbcore: registered new interface driver ALi m5602 ALi m5602: registered nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010 REISERFS (device sda2): found reiserfs format "3.6" with standard journal REISERFS (device sda2): using ordered data mode REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda2): checking transaction log (sda2) REISERFS (device sda2): Using r5 hash to sort names REISERFS (device sda4): found reiserfs format "3.6" with standard journal REISERFS (device sda4): using ordered data mode REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda4): checking transaction log (sda4) REISERFS (device sda4): Using r5 hash to sort names Adding 1052252k swap on /dev/sda3. Priority:-1 extents:1 across:1052252k r8169 0000:02:00.0: eth0: link down iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 wlan0: deauthenticating from 00:0c:f6:1d:c9:e8 by local choice (reason=3) wlan0: authenticate with 00:0c:f6:1d:c9:e8 (try 1) wlan0: authenticated wlan0: associate with 00:0c:f6:1d:c9:e8 (try 1) wlan0: RX AssocResp from 00:0c:f6:1d:c9:e8 (capab=0x431 status=0 aid=2) wlan0: associated