spamassassin build log full of lies about what isn't installed

build.log (text/plain), 7.30 KB, created by Stephen J. Turnbull on 2010-08-17 04:35:28 UTC

You should enable -g (or higher) for debugging!
 [32;01m*[0m CPV:  mail-filter/spamassassin-3.3.1-r3
 [32;01m*[0m REPO: gentoo
 [32;01m*[0m USE:  amd64 berkdb elibc_glibc ipv6 kernel_linux ldap multilib mysql ssl test userland_GNU
>>> Unpacking source...
>>> Unpacking Mail-SpamAssassin-3.3.1.tar.bz2 to /var/tmp/portage/mail-filter/spamassassin-3.3.1-r3/work
>>> Source unpacked in /var/tmp/portage/mail-filter/spamassassin-3.3.1-r3/work
>>> Preparing source in /var/tmp/portage/mail-filter/spamassassin-3.3.1-r3/work/Mail-SpamAssassin-3.3.1 ...
 [32;01m*[0m Applying spamassassin-3.3.1-PERL-5-12.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/mail-filter/spamassassin-3.3.1-r3/work/Mail-SpamAssassin-3.3.1 ...
 [32;01m*[0m Using ExtUtils::MakeMaker
 [32;01m*[0m perl Makefile.PL PREFIX=/usr INSTALLDIRS=vendor INSTALLMAN3DIR=none DESTDIR=/var/tmp/portage/mail-filter/spamassassin-3.3.1-r3/image/ SYSCONFDIR=/etc DATADIR=/usr/share/spamassassin ENABLE_SSL=yes PERL_BIN=/usr/bin/perl
What email address or URL should be used in the suspected-spam report
text for users who want more information on your filter installation?
(In particular, ISPs should change this to a local Postmaster contact)
default text: [the administrator of that system] the administrator of that system

NOTE: settings for "make test" are now controlled using "t/config.dist". 
See that file if you wish to customise what tests are run, and how.

checking module dependencies and their versions...

***************************************************************************
ERROR: the required Net::DNS module is not installed,
minimum required version is 0.34.

  Used for all DNS-based tests (SBL, XBL, SpamCop, DSBL, etc.),
  perform MX checks, and is also used when manually reporting spam to
  SpamCop.

  You need to make sure the Net::DNS version is sufficiently up-to-date:

  - version 0.34 or higher on Unix systems
  - version 0.46 or higher on Windows systems


***************************************************************************
ERROR: the required NetAddr::IP module is not installed,
minimum required version is 4.000.

  Used in determining which DNS tests are to be done for each of
  the header's received fields, and used by AWL plugin for extracting network
  address from an IPv6 addresses (and from IPv4 address on nondefault mask).


***************************************************************************
NOTE: the optional Mail::SPF module is not installed.

  Used to check DNS Sender Policy Framework (SPF) records to fight email
  address forgery and make it easier to identify spams.


***************************************************************************
NOTE: the optional IP::Country module is not installed.

  Used by the RelayCountry plugin (not enabled by default) to determine
  the domain country codes of each relay in the path of an email.


***************************************************************************
NOTE: the optional Razor2 module is not installed,
minimum required version is 2.61.

  Used to check message signatures against Vipul's Razor collaborative
  filtering network. Razor has a large number of dependencies on CPAN
  modules. Feel free to skip installing it, if this makes you nervous;
  SpamAssassin will still work well without it.

  More info on installing and using Razor can be found
  at http://wiki.apache.org/spamassassin/InstallingRazor .


***************************************************************************
NOTE: the optional Net::Ident module is not installed.

  If you plan to use the --auth-ident option to spamd, you will need
  to install this module.


***************************************************************************
NOTE: the optional IO::Socket::INET6 module is not installed.

  This is required if the first nameserver listed in your IP
  configuration or /etc/resolv.conf file is available only via an
  IPv6 address. Also used by a DCC plugin to access dccifd over network.


***************************************************************************
NOTE: the optional IO::Socket::SSL module is not installed.

  If you wish to use SSL encryption to communicate between spamc and
  spamd (the --ssl option to spamd), you need to install this
  module. (You will need the OpenSSL libraries and use the
  ENABLE_SSL="yes" argument to Makefile.PL to build and run an SSL
  compatibile spamc.)


***************************************************************************
NOTE: the optional Mail::DKIM module is not installed,
minimum required version is 0.31, recommended version is 0.37 or higher.

  If this module is installed and the DKIM plugin is enabled,
  SpamAssassin will perform DKIM signature verification when DKIM-Signature
  header fields are present in the message headers, and check ADSP rules
  (e.g. anti-phishing) when a mail message does not contain a valid author
  domain signature. Version 0.37 or later is needed to fully support ADSP.


***************************************************************************
NOTE: the optional LWP::UserAgent module is not installed.

  The "sa-update" program requires this module to make HTTP requests.


***************************************************************************
NOTE: the optional HTTP::Date module is not installed.

  The "sa-update" program requires this module to make HTTP
  If-Modified-Since GET requests.


***************************************************************************
NOTE: the optional Encode::Detect module is not installed.

  If you plan to use the normalize_charset config setting to detect
  charsets and convert them into Unicode, you will need to install
  this module.

REQUIRED module missing: Net::DNS
REQUIRED module missing: NetAddr::IP
optional module missing: Mail::SPF
optional module missing: IP::Country
optional module missing: Razor2
optional module missing: Net::Ident
optional module missing: IO::Socket::INET6
optional module missing: IO::Socket::SSL
optional module missing: Mail::DKIM
optional module missing: LWP::UserAgent
optional module missing: HTTP::Date
optional module missing: Encode::Detect

warning: some functionality may not be available,
please read the above report before continuing!

>>> Source configured.
>>> Compiling source in /var/tmp/portage/mail-filter/spamassassin-3.3.1-r3/work/Mail-SpamAssassin-3.3.1 ...
make -j3 spamc/Makefile 
make: *** No rule to make target `spamc/Makefile'.  Stop.
 [31;01m*[0m ERROR: mail-filter/spamassassin-3.3.1-r3 failed:
 [31;01m*[0m   emake failed
 [31;01m*[0m 
 [31;01m*[0m Call stack:
 [31;01m*[0m     ebuild.sh, line  54:  Called src_compile
 [31;01m*[0m   environment, line 2814:  Called die
 [31;01m*[0m The specific snippet of code:
 [31;01m*[0m       emake spamc/Makefile || die "emake failed";
 [31;01m*[0m 
 [31;01m*[0m If you need support, post the output of 'emerge --info =mail-filter/spamassassin-3.3.1-r3',
 [31;01m*[0m the complete build log and the output of 'emerge -pqv =mail-filter/spamassassin-3.3.1-r3'.
 [31;01m*[0m The complete build log is located at '/var/tmp/portage/mail-filter/spamassassin-3.3.1-r3/temp/build.log'.
 [31;01m*[0m The ebuild environment file is located at '/var/tmp/portage/mail-filter/spamassassin-3.3.1-r3/temp/environment'.
 [31;01m*[0m S: '/var/tmp/portage/mail-filter/spamassassin-3.3.1-r3/work/Mail-SpamAssassin-3.3.1'